R
TFT-LCD TV/DVD Combo
OWNER'S MANUAL
Please READ this manual carefully before
operating your TV, and retain it for future
reference.
MODELS:
HLC32R1
HLC26R1
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rule. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, use and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However there is no
guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encourage to
try to correct the interference by one or more of the following measures:
*Reorient or relocate the receiving antenna.
*Increase the separation between the equipment and receiver.
*Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
*Consult the dealer or an experienced radio/TV technician for help.
This device compiles with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may be not cause harmful interference.
(2) this device must accept any interference received, including interference that may cause undesired
operation.
FCC CAUTION:
To assure continued compliance and possible undesirable interference, the provided ferrite cores must be
used when connecting this LCD display to video equipment; and maintain at least 40cm spacing to other
peripheral device.
CANADIAN NOTICE:
This Class B digital apparatus compiles with Canadian ICES-003.
Energy Star compliant
By being Energy Star compliant you are assured that your Haier model is helping the environment by using less
energy while saving you money. ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and
the U.S. Department of Energy promoting energy efficiency.
Owner s Manual 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
SAVE THESE INSTRUCTIONS
Thank you for purchasing the Haier product. This easy-to-use manual will guide you in getting the best use of your
product. Remember torecord the modeland serial number. They are on labelin back ofthe unit.
Model number
serial number
Date of purchase
Staple your receipt to your manual. You will need it to obtain warranty service.
4
TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Contents
Video Menu
Warning . . . . . . . .............. . . . . . . . . . . . . . . . . . . . . .
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction
Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...........
Connection Options . . . . . . . . . . . . . . . . . . . . . .........
2
3
How to select picture mode..................................
How to customize your own picture status .............
VGA Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..
Audio Menu
How to select audio mode.....................................
How to customize your own audio status ...............
SAP Broadcasts Setup.........................................
Function Menu
Menu Language...................................................
OSD Timeout.......................................................
OSD Transparency...............................................
Screen Mode.......................................................
Blue Screen.........................................................
DPMS.................................................................
Time zone setting.................................................
Date /Time setting................................................
Sleep Timer setting..............................................
DTV Caption Style................................................
Lock Menu
21
21
22
6
7
8
Universal Remote control . ............ .. . .. . .. .........
Installation
23
23
23
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . ........
Antenna Connection . . . .. . .. . ...........................
Connecting a VCR. . . . . . . . . . . . . . . . . . . . . ...........
External A/V Source Setup . . . ... . .. . ..................
Connecting a DVD player . . . . . ...... . . . . . . . . . . . . .
Connecting a DTV(digital TV) ..............................
Connecting digital audio output . . . . . . . . . . . . . . . . .
Connecting a computer. . . . . . . . . . . . . . . . . . . . . . . .
Monitor Out Setup. . . . . . . . . . . . . . . . . . . . .............
HDMI and DVI input. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cable sample......................................................
15
Connecting Headphones . . . .. . .. . .. . .. . .. . ......
Power source................ . . . .. . .. . .. . .. . .. . .. . .
Removing the table stand and installing a
wall mount bracket. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operation
9
9
10
11
11
12
12
13
14
14
16
16
Parental Control rating and categories...................
Lock setup...........................................................
Other Functions
17
Brief Info. . . . . . . . . . . . . . . . . . . . . . . . . . . . . ............
Using the Guide. . . . . . . . . . . . . . . . . . . . . . . ............
Quick program view..............................................
CC (Closed Caption Display) . . . . .. . .. . .. . .... .. .
USB Input............................................................
DVD Operation
Basic Playback....................................................
Advanced Playback..............................................
Special Function Playback....................................
DVD System Setup...............................................
Playable Discs.....................................................
Discs Protection and DVD Characteristics..............
Switching On/Off the TV set . .. . .... . .. . .. . .. . ....
Choose the Menu Language . . . . .........................
Choose the input source......................................
Channel Menu
Channel Scan............... . . . .. . .. . .. . .. . .. . .. . ..
Channel Skip....... . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Select the desired program. . . . . . . . . . . . . . . . . . . . .
Select the desired sound. . . . . . . . . . . . . . . . . . .. . . .
Mute. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18
18
18
19
19
20
20
20
Maintenance . . ...... . . . . . . . . . . . . . . . . . . . . . . . . . .
Product Specification . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warranty ............................................................
Owner s Manual 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Controls
This is a simplified representation of the TV front panel, side panel control buttons and side inputs.
TV Side panel controls and connections
1.MENU: Menu display. Press to access the on-screen menu display
2.INPUT: Press toaccess the inputsource mode. Pressrepeatedly to changethe source tothe one youwant to
watch. In the MENU screen, the INPUT button serves as the ENTER button.
3.VOL +/-: Press to adjust the volume. In the MENU screen, these buttonsserve as left/rightbuttons.
4.CH +/- : Press to scan through channels. To scan quickly through channels, press and hold down
either +/- . In the MENU screen, these buttonsserve as up/downbuttons.
5.POWER: Press toturn on andoff the TV.
6.USB input: Connecta USB flashdrive to viewJPEG images orlisten to MP3songs.
7.Av2 AUDIOIN: Connect the audioL/R cables fromthe video signalsource to thesejacks.
8.AV2 VIDEO IN: Connects the compositevideo cable froman external signalsource to thisjack.
9.Headphone jack : Headphone audio output terminal.
10.HDMI IN: Connect aHDMI device toreceive digital audioand uncompressed digitalvideo signals.
11.Remote Sensor Receivers IR signals from the remote control.
Do not put anything near the sensor ,which may block the remote control signal.
DVD panel controls
STOP
Press to stop the DVD disc.
PLAY/PAUSE
Press to play the DVD program disc, and press again to pause the DVD program.
OPEN/CLOSE:
Press to open the disc tray, and press again to close the tray.
DVD slot load
PREV
Press to play the previous program.
NEXT
Insert DVD with label towards
back(Silver "shiny" side
facing towards you.)
Press to play the next program.
6
TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Connection Options
Back panel connections
2
1
L
DVI AUDIO
R
2
1
Pb
Y
Pr
R
L
AUDIO
R
L
VGA AUDIO
VGA
1
S-VIDEO
VIDEO
L AUDIO
AUDIO
R
L AUDIO
R
1. Digital Audio Output: Connect various types of digital audio equipment.
NOTE: In standby mode, these ports will not work.
2. DVI Audio In: When using a DVI to HDMI adapter, connect the audio signal to these jacks.
3. Antenna Input: Connect cable or antenna signals to the TV, either directly or through your cable box.
4. HDMI In: Connect a HDMI device to receive digital audio and uncompressed digital video.
5.VGA Audio In: Connect the audio L/R cables from a computer to this jack.
6.VGA Video In: Connect a video cable from a computer to this jack.
7. VIDEO In: Connects the video signal from a video device.
8. Component Video In: Connect a component video device to these jacks.
9. AUDIO In: Connect the audio L/R cables from the video signal source to these jacks.
10. S-VIDEO In: Connect the S-Video cable from an external signal source to this jacks.
11. COMPONENT AUDIO In: Connect the audio L/R cables from the component video signal source to these jacks.
12. AUDIO In: Connect the audio L/R cables from the S-Video signal source to these jacks.
13. AUDIO Out: Connect the audio L/R cables to your audio equipment.
Owner s Manual 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Remote control
The remote control cannot be operated unless the batteries are properly loaded.
When using the remote control, aim it at the remote sensor on the TV.
1.Power Press to turn on and off the TV.
1
DVD
USB
2.USB Press to switch input source to USB in.
3.GUIDE Display the guide when you are watching
analog or digital channels.
2
21
GUIDE
CCD MTS/SAP CH.LIST
3
4
5
6
22
23
24
PICTURE AUDIO
ARC FAVORITE
4.CCD(closed caption) Select a closed caption option
5.PICTURE Press repeatedly to cycle through the available picture modes.
6.AUDIO
25
Press to cycle through different sound settings.
7.INPUT Show the input source.
8.MUTE Switches the sound on or off.
9.VOLUME UP/DOWN Press to adjust the volume.
10.MENU Press to open the on-screen menu
11.Thumbstick(Up/Down/Left/Right)
Allows you to navigate the on-screen menus
and adjust the system settings to your preference.
12.SLEEP button Press to display the sleep timer option.
13.DVD PLAY/PAUSE
26
INPUT
MUTE
27
28
7
8
RECALL
9
VOL
CH
29
30
14.DVD Open/close
MENU
EXIT
15.DVD FAST FORWARD
10
11
16.DVD FAST REVERSE
17.DVD CALL
31
ENTER
18.DVD MENU
19.DVD SEARCH
20.DVD ANGLE
SLEEP
DISPLAY
12
13
32
21.DVD Mode
33
34
OPEN/CLOSE PLAY/PAUSE STOP
REPEAT
NEXT
22.CH.LIST Open the channel list in TV.
23.MTS/SAP Select MONO, STEREO, SAP in NTSC system
24.FAVORITE Open the favourite channel list in TV
25.ARC Select the aspect ratio
14
15
REV
PREV
35
36
37
38
16
17
18
D.MENU D.CALL D.AUDIO SETUP
SEARCH ANGLE SUBTITLE PROGRAM
26.Number buttons Press to change a channel.
27. button Press to select digital channels. For example, to enter
“54-3”, press “54”, “ ” and “3”.
19
20
39
40
28.RECALL Press to jump back and forth between two channels.
29.CHANNEL UP/DOWN Press to scan between the last two channels,
press and hold down either +/- .
30.EXIT Clears all on-screen displays and returns to TV viewing
from any menu.
31.ENTER Accesses the highlighted item in the on-screen menu
32.DISPLAY
Press to display the TV status information on the top of the TV screen.
33.DVD STOP
34.DVD REPEAT
35.DVD Previous Chapter
36.DVD Next Chapter
37.DVD AUDIO Mode
38.DVD SETUP
39.DVD PROGRAM
40.DVD SUBTITLE
8
TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
External Equipment Connections
Accessories
STB
TV
DVD
CABLE
VCR
AUD
R
PICTURE AUDIO
PC
HDMI
TFT-LCD TV
OWNER'S MANUAL
INPUT
MUTE
RECALL
Please READ this manual carefully before
operating your TV, and retain it for future
reference.
VOL
CH
MENU
EXIT
ENTER
SLEEP
DISPLAY
USB
REV
PLAY/PAUSE
STOP
PREV
REC
NEXT
REPEAT MTS/SAP FREEZE CH.LIST
GUIDE
CCD
ARC
FAVORITE
MODELS:
HL26K
HL32K
Remote control
Owner`s manual
Alkaline battery(AAA)
2
Antenna Connection
Over-the-air TV reception quality will depend on your antenna type, antenna location and antenna positioning.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Wall Antenna
Socket
Bronze Wire
RF Coaxial Wire (75 ohm)
VHF Antenna
UHF Antenna
Turn clockwise to tighten
Bronze Wire
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Outdoor
Antenna
Be careful not to bend the bronze wire
when connecting the antenna.
To improve the picture quality in a poor signal area,
please purchase a signal amplifier and install properly.
If the antenna needs to be split for two TV`s, install a
2-Way Signal Splitter in the connections.
To install the antenna properly please contact a
professional in your area.
Owner s Manual 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
External Equipment Connections
NOTE: All cables shown are not included with the TV.
Choose Your Connection
There are several ways to connect your television,
depending on the components you want to connect and
the quality of the signal you want to achieve. The
following are examples of some different ways to connect
your TV with different input sources.
Connecting a VCR
To avoid picture noise (interference), leave an adequate
distance between the VCR and TV.
Connection Option 1
Set VCR output switch to channel 3 or 4 and then tune
the TV to the same channel number.
2
1
L
DVI AUDIO
R
2
Connection Option 2
1. Connect the audio and video cables from the VCR's
output jacks to the TV input jacks, as shown in the figure.
When connecting the TV to VCR, match the jack colors
(Video = yellow, Audio Left = white, and Audio Right = red).
If you connect a S-VIDEO output from VCR to the
S-VIDEO input, the picture quality is improved;
1
1
Pb
VGA AUDIO
VGA
Y
Pr
R
L
AUDIO
R
L
VIDEO
L AUDIO
S-VID
AUDIO
R
L AUDIO
R
compared to connecting a regular VCR to the Video input.
2. Insert a video tape into the VCR and press PLAY on
the VCR. (Refer to the VCR owner`s manual.)
3. Select the input source with using the
INPUT button on the remote control, and
then press
press ENTER button to confirm.
/
button to select the source,
10 TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
External Equipment Connections
External A/V Source Setup
How to connect
Connect the audio and video cables from the external
equipment's output jacks to the TV input jacks, as shown
in the figure.
When connecting the TV to external equipment, match the
jack colors (Video = yellow, Audio Left = white, and Audio
Right = red).
2
1
L
DVI AUDIO
R
2
1
How to use
1. Select the input source with using the INPUT button on
the remote control.
Pb
VGA AUDIO
VGA
Y
Pr
R
L
AUDIO
R
L
1
2. Press
3. Press ENTER button to confirm.
/
button to select the desired source.
VIDEO
L AUDIO
S-VIDEO
AUDIO
R
L AUDIO
R
4. Operate thecorresponding external equipment.
Camcorder
Connecting a DVD player
How to connect
Video Game Set
1. Connect theDVD video outputs(COMPONENT) to
the Y Pb Pr jacks on the TV and connect the DVD audio
outputs to the YPbPr Audio IN jacks onthe TV, as
shown in the figure.
2. If your DVD onlyhas an S-VIDEOoutput jack,
connect this to the S-VIDEO inputon the TV. as shown
in the figure.
2
1
L
DVI AUDIO
R
2
1
Note
If your DVD player does not have component video
output, use S-Video.
Pb
VGA AUDIO
VGA
Y
Pr
L
AUDIO
R
How to use
1
1. Turn on the DVD player, insert a DVD.
2. Use INPUTbutton on theremote control toselect
component mode.
VIDEO
L AUDIO
R
S-VIDEO
AUDIO
L AUDIO
R
3. Press Play button on external equipment for program
play.
4. Refer to the DVD player's manual for operating
instructions.
Component Input ports
To get better picture quality, connect a DVD player to the
component input ports as shown below.
Component ports
on the TV
Y
Pb
Pb
Pr
Pr
Y
Y
Y
Y
Video output ports
on DVD player
B-Y R-Y
Cb
P
Cr
P
B
R
Owner s Manual 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
External Equipment Connections
Connecting a DTV(digital TV)
This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive
Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.
This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents (480p,720p,1080i).
How to connect
Use the TV`s COMPONENT , VGAor HDMI
jack for video connections, depending on
your set-top box connector. Then, make
the corresponding audio connections.
2
L
DVI AUDIO
2
1
R
How to use
1. Turn on the digital set-top box. (Refer to the
1
owner`s manual for the digital set-top box.)
2. Use INPUT on the remote control to select
COMPONENT , VGA or HDMI source.
Pb
VGA AUDIO
VGA
Y
Pr
R
L
AUDIO
R
L
1
VIDEO
L AUDIO
S-VIDEO
AUDIO
R
L AUDIO
R
Signal
480i
COMPONENT
HDMI
Yes
Yes
Yes
Yes
Yes
Yes
480p
720p
1080i
1080p
Yes
Yes
Yes
Yes
HDMI
Digital Set-top Box
Connecting a digital audio output
Send the TV`s audio to external audio equipment (stereo
system) via the Digital Audio Output (Optical) port.
How to connect
1. Connect one end of an optical cable to the TV Digital
Audio(Optical) Output port.
2. Connect the other end of the optical cable to the digital
audio (optical) input on the audio equipment.
See the external audio equipment instruction manual for
operation.
2
1
L
DVI AUDIO
R
2
1
Pb
VGA AUDIO
VGA
Y
1
Pr
R
L
AUDIO
R
L
Note
When connecting with external audio equipments, such
as amplifers or speakers, please turn the TV speakers off.
VIDEO
L AUDIO
S-VIDEO
AUDIO
R
L AUDIO
R
Caution: Do not look into the optical output
port. Looking at the laser beam may damage
your vision.
!
12 TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
External Equipment Connections
Connecting a computer
How toconnect
1. To getthe bestpicture quality, adjustthe VGAgraphics card to 1024x768 .
2. Usethe TV`sVGAor DVI(Digital VisualInterface)Audio INport foraudio connections,depending on your computer
connector.
If the graphic card on the computer does not output analog and digital RGB simultaneously, connect only one of
either VGAIN or HDMI IN todisplay the VGAon theTV.
If the graphic cardon thecomputer doesoutput analogand digitalRGB simultaneously, setthe TVto eitherVGAor
HDMI ; (theother mode isset to Plugand Play automaticallyby theTV.)
3. Then,make thecorresponding audioconnection. Ifusing asound card,adjust the VGA sound as required.
How touse
1. Turnon the computerand theTV.
2. UseINPUT onthe remotecontrol toselect VGAor HDMIsource.
3. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or
brightness in VGAmode. If noiseis present, changethe VGAmode to anotherresolution, change therefresh rate to
another rate oradjust the brightnessand contrast onthe menu untilthe picture isclear. Ifthe refresh rateof the VGA
graphic cardcan notbe changed,change theVGAgraphic cardor consultthe manufacturerof theVGAgraphic card.
Note
1.Use aDVI cable.
2.Avoid keepinga fixed imageon theTV's screen fora long periodof time.The fixed image may becomepermanently
imprinted onthe screen.
3. Thesynchronization inputform forHorizontal andVerticalfrequencies isseparate.
Resolution
Frame
frequency
(Hz)
Resolution
Mode
2
1
L
DVI AUDIO
R
60Hz
60Hz
75Hz
VGA
640x480
800x600
2
1
SVGA
60Hz
75Hz
Pb
VGA AUDIO
VGA
Y
Pr
R
L
AUDIO
R
L
XGA
1024x768
1
VIDEO
L AUDIO
S-VIDEO
AUDIO
R
L AUDIO
R
Owner s Manual 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
External Equipment Connections
HDMI and DVI input
When the source device(DVD player or Set Top Box) supports HDMI
How To Connect
1. Connect the source device to HDMI port of this TV with an HDMI cable(not supplied with this product).
2. No separated audio connection is necessary.
How To Use
If the source device supports Auto HDMI function, the output resolution of the source device will be automatically
set to 1280x720p.
If the source device does not support Auto HDMI, you need to set the output resolution appropriately.
To get the best picture quality, adjust the output resolution of the source device to 1280x720p.
Select HDMI input source in input source option of Select Main source menu.
When the source device(DVD player or Set Top Box) supports DVI
How To Connect
1. Connect the source device to HDMI port of this TV with a HDMI-to-DVI cable(not supplied with this product).
2. Aseparated audio connection is necessary.
3. If the source device has an analog audio output connector, connect the source device audio output to DVI Audio
In port located on the left side of HDMI port.
How To Use
If the source device supports Auto DVI function, the output resolution of the source device will be automatically
set to 1280x720p.
If the source device does not support Auto DVI, you need to set the output resolution appropriately.
To get the best picture quality, adjust the output resolution of the source device to 1280x720p.
Press the INPUT button to select HDMI input source in input source option of Select Main source menu.
14 TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Cable sample
HDMI Cable
(not supplied withthe product)
HDMI to DVI Cable
(not supplied withthe product)
Analog AudioCable
(Stereo to RCA type)
(not supplied withthe product)
Owner s Manual 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
External Equipment Connections
Connecting Headphones
You can connect a set of headphones to your set if you wish to watch a
TV programme withoutdisturbing the otherpeople in theroom.
Plug a set of headphones into the 3.5mm
mini-jack socket on the side panel of the set.
HDMI3 IN
HDMI4 IN
Note
Prolonged use of headphones at a high volume
may damage your hearing.
You will not receive sound from the speakers
when you connect headphones to the system.
Power source
AC Outlet
TO USE AC POWER SOURCE
Wider Hole
and Blade
Use the AC polarized line cord provided for
operation onAC. Insert theAC cordplug into
a standard polarizedAC outlet.
Note
Never connect the AC line cord plug to other
than the specified voltage. Use the
attached power cord only.
If the polarized AC cord does not fit into a non-
polarized AC outlet, do not attempt to file or cut
the blade. Itis the user`sresponsibility to have
an electrician replacethe obsolete outlet.
If you cause a static discharge when touching
the unit and the unit fails to function, simply
unplug the unit from the AC outlet and plug it
back in. The unit should return to normal operation.
Polarized AC Cord Plug
16 TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Removing the table stand and installing a
wall mount bracket
HLC26R1
Remove 4X M4 screws securing the
stand to the TV, then remove the stand.
Use 4X M6 screws to secure the wall
bracket (not supplied)to the backof your TV.
HLC32R1
Remove 6X M4 screws securing the
stand to the TV, then remove the stand.
Use 4X M6 screws to secure the wall
bracket (not supplied)to the backof your TV.
Owner s Manual 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Operation
In the manual, the OSD (on screen display) may be
different from your TV`s, because it is just an example to
help you with the TV operation.
There are several options you might need to set up in order
for your TV to work properly. Read the instructions that
follow.
Initial Setup: Set according to the screen display.
Switching On/Off the TV set
1. First, connect power cord correctly.
2. Select the viewing source by using INPUT button on
the remote control.
3. When finished usingthe TV, press POWER button on
the remote control. The TV reverts to standby mode.
4. If you intend to be away on vacation, disconnect the
power plug fromthe wall poweroutlet.
Note
If the TV in power on , the screen show information
according the type of input signal . the information will
disappear. If there is no signal , No Signal will display
on the screen.
Choose the Menu Language
Language
English
Short
Video
When you start using your set for the first time, you must
select the language which will be used for displaying menus
and indications.
OSD Timeout
Audio
OSD Transparency Middle
Screen Mode
Blue Screen
DPMS
Normal
On
Channel
1. Choose TV Input and then press MENU button.
On
2. Press
/
button to select Function menu.
Function
Lock
Time Setup
Closed Caption
Default
3. Press or ENTER button and then use
/
button to select
Language.
4. Press
/
button to select language.
Select
EXIT Back
/
Function
English Spanish or French
Choose the Input source
Select Source
Change the picture source so you can watch your TV,
VCR, DVD, Cable , or any other devices that are
connected to your TV.
TV
Video1
Video2
S-Video
Component1
Component2
VGA
1. Press INPUT button to enter the Select Source menu
and then use
/
button to select the desired items
(TV, Video1, Video2, S-Video,Component1, Component2,
VGA, HDMI1,HDMI2,HDMI3,HDMI4).
HDMI1
HDMI2
HDMI3
HDMI4
2. Press ENTER button to confirm .
18 TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Channel menu
This TV set has two methods to set channels, which are
respectively Channel Scan, Channel Skip.
In this section, how to use the remote control to set
channel is explained. You can also use buttons on the TV to
set channel.
Note
The Channel menu will be only operated in normal TV mode.
Video
Tuner
Antenna
Channel Scan
Channel Scan
Channel Skip
Audio
1. Press MENU button and then use
Channel menu.
/
button to select
Channel
Function
Lock
2. Press /ENTER button to select Tuner.
3. Press
4. Press
/
button to select Cable or Antenna mode.
button to select Channel Scan.
/
Select
Scan
EXIT Back
ENTER
/
5. Press /ENTER button to start searching.
6. To cancel searching, press EXIT button.
Channel
Video
Status: Scanning
Analog Channels: 19
Antenna
Note
Audio
Digital Channels:
0
When Antenna is selected, the TV will detect antenna
signals and will search for antenna TV (NTSC and
ATSC) channels available in your local area.
Channel
64%
Function
Lock
When Cable is selected, the TV will detect cable
company supplied signals and will search for cable TV
(NTSC, QAM modulated) channels available in your
Area.
EXIT Cancel
Channel Scan
ENTER
Channel Skip
Video
Tuner
Antenna
A skip channel is skipped when using and
button to browse the channels. A skip channel can
be watch by key-in the channel number or select by
list.
Channel Scan
Channel Skip
Audio
Channel
Function
Lock
Default un-scanned analog channels are skip.
Channel with a check icon is a skipped channel.
Select
Enter
EXIT Back
ENTER
/
Channel
1. Press MENU button and then use
Channel menu.
/
button to select
button to
1
2
3
4
5
5-1
6
7
8
9
10
Analog
Analog
Analog
Analog
Analog
Digital KPIX-DT
Analog
Analog
Video
2. Press /ENTER button and then use
select Channel Skip.
/
Audio
Channel
3. Press
/
button to select a channel, then press ENTER
and
Function
Lock
button to toggle between
.
Analog
Analog
Analog
Select
ENTER Set
EXIT Back
/
Channel Skip
Owner s Manual 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Select the desired program
1. Using CH+/- buttons.
Press CH+ button to select a channel number in
number increasing direction.
Press CH- button to select a channel number in
number decreasing direction.
Note
If skip is ON on one channel, press CH+/- button, the
channel will not appear.
2. Also can enter channel number directly,eg:2-0.
Select the desired sound
Press VOL-/+ buttons on the remote or the front of the
TV set to adjust the volume level. The range is 0~100.
When the volume buttons are pressed the volume level
is displayed automatically on the TV screen.
Volume
Mute
1. Press MUTE button on the remote control and
type face will display on the screen. At this time, the
sound of the TV set is turned off.
2. If you want to recover the sound, press MUTE
button again or directly press VOL+ button.
20 TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Video menu
The TV menu gives you an overview of the menus you can select.
Note
Depending on the input signal, one or more menu items may not be selectable.
How to select picture mode
The picture mode provides the pre-defined images settings:
Video
Mode
Custom
Standard, Vivid, Custom and Mild .
59
59
59
7
Brightness
Contrast
Audio
1. Press MENU button and then use
Video menu.
/
button to select
button to
Color
Channel
Tint
58
Sharpness
Color Temperature
Advanced Video
2. Press /ENTER button and then use
select Mode.
/
Function
Lock
3. Press
/
button to select the option Standard, Vivid,
Custom and Mild.
Select
EXIT Back
/
Video
You can also pressPICTURE button on the remote control
to select the option Standard, Vivid, Custom and Mild.
How to customize your own picture
status
1. Press MENU button and thenuse
Video menu.
/
button to select
2. Press /ENTER button and then use
select the desired items.
3. Press /ENTER button and then use
adjust the setting.
/
button to
button to
/
Mode
Select the modeof picture(Standard/ Vivid/ Custom/ Mild).
Brightness
This will adjust the light output of the complete picture,
which will mainly affect the darker areas of the picture.
Note
Contrast
This will adjustthe intensity ofbright parts inthe picture
but keep the dark parts unchanged.
The picture options can only be adjusted in
the CUSTOM mode. The other picture modes
are preset.
Color
This will adjust the saturation level of the colors to suit
your personal preference.
Tint
Allows you to select the color mix (Tint) of the picture.
Sharpness
This will adjust the sharpness of fine details in the picture.
Owner s Manual 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Video menu
Color temperature
This will increase or decrease Warm (red) and Cool (blue)
colors to suit personal preferences.
Select Cool to give the white colors a blue tint, Standard
to give the white colors a neutral tint, Warm to give the
white colors a red tint.
Advanced Video
To adjust the picture in advanced: DNR, Black Level Extender,
White Peak Limiter, CTI, Flech Tone, Adaptive Luma Control.
DNR
To adjust reduce the appearance of digitizing error by the compression:
Off, Weak, Medium, Strong, Auto.
Video
DNR
Medium
On
Black Level Extender
White Peak Limiter
CTI
Black Level Extender
On
Audio
To adjust the ability in the black areas detail of the picture: On and Off.
White Peak Limiter
Medium
On
Flesh Tone
Channel
On
Adaptive Luma Control
To adjust the ability in the white areas detail of the picture: On and Off.
CTI
Function
Lock
To adjust the picture for color errors: Off, Weak, Medium and Strong.
Flesh Tone
To adjust the flesh color: On and Off.
Adaptive Luma Control
Select
EXIT Back
/
Advanced Video
To adjust changes in the luminance of the picture: On and Off.
VGA Set
When you select the VGA input, this function is used.
Video
Audio
Mode
Custom
Adjustment for screenPosition, Clock, Phase, Setting
59
Brightness
Contrast
Display adjust menu by pressing INPUT button then use
59
Color Temperature
Advanced Video
VGA
/
button to select the the source of VGA item.
Function
Lock
Auto sync: Automatically adjust display of the picture
(Olny available in VGA source).
Position : Adjust the screen position.
Phase : Adjust the phase of Pixel clock.
Clock : Adjust the clock of input signal.
Select
EXIT Back
/
Video
1. Press MENU button and then use
Video menu.
/
button to select
Video
Audio
Auto Sync
H Position
V Position
Phase
2. Press /ENTER button and then use
select VGA.
/
button to
button to
59
59
59
59
3. Press /ENTER button and then use
adjust the setting.
/
Function
Lock
Clock
Select
Enter
EXIT Back
ENTER
/
VGA
22 TFT-LCD TV
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Audio menu
How to select audio mode
/
1. Press MENU button and then use
Audio menu.
button to select
0
Video
Balance
Bass
59
59
Audio
Treble
2. Press / ENTER button and then use
select Mode.
/
button to
Sound Surround
Mode
On
Channel
Off
Off
3. Press /ENTER button to select the option Off, Concert,
Living Room, Hall, Bathroom, Cave, Arena and Church.
You can also press AUDIO button on the remote control
to select the Audio Mode Off, Concert, Living Room, Hall,
Bathroom, Cave, Arena and Church.
Equalizer
SPDIF Type
AVL
PCM
Off
Function
Lock
How to Customize your own audio
status
Select
Adjust
EXIT Back
ENTER
/
Audio
1. Press MENU button and then use
Audio menu.
/
button to select
2. Press /ENTER button and then use
select desired items.
3. Press /ENTER button and then use
adjust the setting.
/
button to
button to
/
Balance
Adjust to emphasize left or right speaker balance.
Bass
Adjust to increaseor decrease lower-pitchedsounds.
Treble
Adjust to increaseor decrease higher-pitchedsounds.
Sound Surround
To turn the simulatedsurround sound onand off.
Mode
To adjust the audio mode: Off, Concert, Living Room, Hall,
Bathroom, Cave, Arena andChurch.
Equalizer
To adjust the equalizer: Off, Rock, Pop, Live, Dance,
Techno, Classic and Soft.
SPDIF Type
To Adjust theSPDIF output: Off, Dolby Digital and PCM.
AVL(Automatic Volume Control)
This will reduces the differences in volume level among
broadcasters.
SAP Broadcasts Setup
This TV can receive MTS stereo programs and SAP
(Secondary Audio Program) that accompanies the stereo
program; if the station transmits an additional sound
signal as well as the original one.
When having selected SAP button on the remote control,
this TV can only receive the signal when the TV station
transmits the proper signals.
Mono sound is automatically received if the broadcast is
only in Mono; even though Stereo or SAP has been
selected.
Select Mono if you want to listen to mono sound during
stereo/SAP broadcasting. Stereo or SAP can be received
in a Analog channel.
1. Use SAP button to select your desired MTS mode in a
analog signal.
Each time you press SAP button, Mono, Stereo or SAP
appear.
If other languages are available on the digital signal,
select them with the SAP button.
2. Press EXIT button to save and return to TV viewing.
Owner s Manual 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Function menu
Menu Language
When you start using your set for the first time, you must
select the language which will be used for displaying menus
and indications.
Language
English
Short
Video
OSD Timeout
Audio
OSD Transparency Middle
1. Press MENU button and then use
Function menu.
/
button to select
Screen Mode
Blue Screen
DPMS
Normal
On
Channel
On
2. Press /ENTER button and then use
select Language.
/
button to
Function
Lock
Time Setup
Closed Caption
Default
3. Press
/
button to select language.
English Spanish or French
Select
EXIT Back
/
Function
OSD Timeout
1. Press MENU button and then use
select Function menu.
2. Press /ENTER button and then use
select OSD Timeout.
/
button to
button to
/
3. Press
/
button to select Short, Middle orLong.
(Short is for 5 seconds; Middle is for 10 seconds;
Long is for 15seconds)
OSD Transparency
1. Press MENU button and then use
the Function menu.
2. Press or ENTER button and then use
select OSD transparency.
/
button to select
button to
/
3. Press
/
button to select Low ,Middle or High.
Screen Mode
Lets you choose the way an analog picture with a 4:3 aspect
ratio is displayed on your TV with a 16:9 ratio picture format.
Note
If a fixed image is displayed on the screen for a long time,
the image may become permanently burned on the screen
and remain visible.
Language
English
Short
Video
OSD Timeout
Audio
OSD Transparency Middle
Screen Mode
Blue Screen
DPMS
Normal
On
Channel
On
Function
Lock
1. Press MENU button and then use
Function menu.
2. Press /ENTER button and then use
select Screen Mode.
/
button to select
button to
Time Setup
Closed Caption
Default
/
Select
EXIT Back
/
Function
3. Press
Cinema.
/
button to select Normal, Zoom, Wide or
Normal
Choose normal whenyou want toview the picturewith
4:3 mode .
Zoom
Choose Zoom when you want to view the picture without
any alteration. However, the top and bottom portions
of the picture will be cropped.
24 TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Function menu
Wide
Choose wide whenyou want toadjust the picture
horizontally, in a linear proportion to fill the entire screen.
Cinema
For letterbox pictures, bars may appear on the top and
bottom on someprograms.
You can also pressARC button on theremote control to
select the desired pictureformat: Normal, Zoom, Wide or
Cinema.
Blue Screen
1. Press MENU button and then use
Function menu.
2. Press /ENTER button and then use
select Blue Screen.
/
button to select
button to
/
3. Press
/
button to select On or Off.
DPMS
PC Power Management. To set On, the set will be in
standby mode automatically if no signal in 2 minutes; if
signal input, the set will be on again automatically.
Note: DPMS is useful only in VGA source.
Time zone setting
This function allows you to select your local time zone.
Broadcasted time information will correct the clock display
for your local time.
Time Zone
Date/Time
Sleep Timer
Pacific
Off
Video
Audio
1. Press MENU button and then use
select Function menu.
/
button to
button to
button to
Channel
2. Press /ENTER button and then use
select Time Setup.
/
Function
Lock
3. Press /ENTER button and then use
select Time Zone.
/
Select
EXIT Back
/
Time Setup
4. Press
/
button to select your viewing area time zone:
Eastern, Central, Mountain, Pacific, Alaska or Hawaii .
Date /Time setting
Setting the clock is necessary in order to use the various
timer features ofthe TV. Also, you can checkthe time
while watching theTV.
Video
Auto
Date
Time
On
1. Press MENU button and then use
select Function menu.
/
button to
2008/01/01
11:54 AM
Audio
2. Press /ENTER button and then use
select Time Setup.
/
button to
Channel
Timer
Off
Function
Lock
On Time
Off Time
11:54 AM
12:00 AM
3. Press /ENTER button and then use
select Date/Time.
/
button to
button to
4. Press /ENTER button and then use
select On or Off.
/
Select
EXIT Back
/
Date/Time
Owner s Manual 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Function menu
Sleep Timer setting
The sleep timer automatically shuts off the TV after a
preset time (from 5 to 240 minutes).
Time Zone
Date/Time
Sleep Timer
Pacific
Off
Video
1. Press MENU button and then use
select Function menu.
/
button to
Audio
2.Press /ENTER button and thenuse
select Time Setup
3. Press /ENTER button and then use
select Sleep Timer.
/
button to
button to
Channel
/
Function
Lock
4. Press
/
button to select the number of minutes.
Select Off,5Min,10Min, 15Min, 30Min, 45Min,60Min,
90Min, 120Min, 180Minor 240Min.
The time begins to count down from the number of
minutes selected.
Select
EXIT Back
/
Time Setup
5. To cancel theset sleep timer:Press button to select
Off.
You can also press SLEEP button to select quickly the
sleep timer.
DTV Caption Style (In DTV mode)
Language
English
Short
Video
This allows you to modify how digital captions are displayed
on your TV. Select from the following options to change the
visual characteristics of your TV`s digital captioning.
Customize the DTV/CADTV captions that appear on your
screen.
OSD Timeout
Audio
OSD Transparency Middle
Screen Mode
Blue Screen
DPMS
Normal
On
Channel
On
Function
Lock
Time Setup
Closed Caption
Default
1. Press MENU button and thenuse
Function menu.
/
button to select
2. Press /ENTER button and then use
select Closed Caption .
/
/
button to
button to
button to
Select
ENTER Enter
EXIT Back
/
Function
3. Press /ENTER button and then use
select DTV Caption Style.
4. Press / ENTER button and then use
/
NTSC Caption
DTV Caption
Off
Off
Video
select the Style, Size, etc., press
to your preference.
Style
/
button to customize
Audio
DTV Caption Style
Channel
Select this option to select the font style of caption display
according to your own preference.
Function
Lock
Press
Size
/
button to select Default or Custom.
Select this option to select the size of caption display
according to your own preference.
Select
Enter
EXIT Back
ENTER
/
Closed Caption
Press
/
Text color
button to select Small, Normal or Large.
Select this option to select the text color or the opacity of
the text box of caption display according to your own
preference.
Select a colorand one ofthe opacity options.
Text Opacity
Specify the opacity for the text color.
BG Color
Select a background color.
BG Opacity
Select the opacity for the background color.
Window Color
Select a window color.
Window Opacity
Select the opacity for the window color.
Style
Custom
Normal
Black
Solid
Video
Size
Audio
Text Color
Text Opacity
BG Color
Channel
Black
Solid
BG Opacity
Function
Lock
Window Color
Window Opacity
White
Solid
Select
/
EXIT Back
DTV Caption Style
26 TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Lock Menu
Parental Control can be used to block specific channels, ratings and other viewing sources.
The parental control function is used to block program viewing based on the ratings sent by the broadcasting station.
The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program
and the categories.
Parental Control rating and categories
Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be
blocked by TV Rating or Individual Categories. Movies that have been shown at the theaters or direct-to-video
movies use the Movie Rating System (MPAA) only.
Ratings for Television programs :
Parental Guide
TV-Y
(All children)
TV-Y7
TV-G
(Children 7 years older)
(General audience)
TV-PG
TV-14
TV-MA
(Parental guidance suggested)
(Parents strongly cautioned)
(Mature audience only)
Ratings for Movies previously shown in theaters:
MPAARating :
G
(General audience)
PG
PG-13
R
(Parental guidance suggested)
(Parents strongly cautioned)
(Restricted)
NC-17
X
(No one 17 and under admitted)
(Adult only)
If you set PG-13 : G and PG movies will be available , PG-13, R, NC-17 and X will be blocked.
CA Eng Rating
C
C8+
Children
Children eight years and older
General Programming, suitable for all audiences
Parental Guidance
G
PG
14+
Viewers 14 years and older
Adult Programming
18+
CA Fren Rating
G
General
8 ans+
13 ans+
16 ans+
18 ans+
Not recommended for young children
Programming may not be suitable for children under the age of 13
Programming is not suitable for children under the age of 16
Programmingrestricted to adults
TV Rating :
(applies to TV-Y, TV-Y7,TV-G,TV-PG,TV-14, TV-MA)
A (Age)
(applies to TV-PG, TV-14)
D (Dialogue - sexual dialogue)
(applies to TV-PG, TV-14, TV-MA)
(applies to TV-PG, TV-14, TV-MA)
(applies to TV-PG, TV-14, TV-MA)
(applies to TV-Y7)
L (Language - adult language)
S (Sex - sexual situations)
V (Violence)
FV (Fantasy Violence)
Owner s Manual 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Lock Menu
Lock setup
Set up blocking schemes to block specific channels, ratings,
and external viewing sources.
Video
Enter Password
A password is required to gain access to this menu.
Audio
1. Press MENU button and then use
Lock menu. Then, press button.
/
button to select
Channel
The TV is set up with the initial password 0-0-0-0 and
security default password is 9-4-4-3.
Function
Lock
2. Use
/
or ENTER button to enter the next menu. Once the option
button to select the desired items, and press
EXIT Back
Lock
is selected, change the settings to your preference.
Password
Change the password by inputting a new password twice.
2
3
4
5
6
7
8
9
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Video
Channel Block
Audio
1. Press MENU button and thenuse
Lock menu.
/
button to select
button to
Channel
2. Press /ENTER button and then use
select Channel Block.
/
Function
Lock
10
11
12
3. Press
/
button to select the item, Press ENTER
button to set.
Set
Select EXIT Back
ENTER
/
Channel Block
Channel Block
Program Block
Password
Video
Parental Lock
Audio
1. Press
2. Press
Note
/
button to selectParental Lock item.
button to select On or Off.
Clean All
Channel
/
Function
Lock
If the Parental Lock is setting as Off, the change of the
Parental Guide , MPAARating ,CA Eng Rating and CA
Fren Rating will be no useful.
Enter
Select EXIT Back
ENTER
/
Lock
Parental Guide
Note
The Parental control will automatically block certain
categories that are more restrictive . For example, if
you block TV-Y category, then all the categories in
the young adult group will be blocked (TV-Y, TV-Y7,
TV-G, TV-PG, TV-14 andTV-MA).
Parental Lock
Parental Guide
MPAA Rating
CA Eng Rating
CA Fren Rating
Digital Rating
Block Unrated
On
Video
Audio
Channel
The sub-ratings (D, L, S, V, FV) work together similarly.
Function
Lock
On
How to set the D, L, S, V and FV sub-ratings.
First, press
TV-Y, TV-Y7,TV-G, TV-PG,TV-14,or TV-MA, and press
button.
/
button select one of these Ratings:
Enter
Select EXIT Back
ENTER
/
Program Block
/
28 TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Lock Menu
Lock setup
A symbol
While
will be displayed for each sub-rating.
is selected, press ENTER button to go to a sub
A
D
L
S
V
FV
Video
TV-Y
rating. To select a different Rating, press
and then repeat the process.
Note
/
buttons
TV-Y7
TV-G
Audio
TV-PG
TV-14
TV-MA
Channel
The V-chip will automatically block certain categories
that are More restrictive .For example, ifyou block
Function
Lock
Allowed Rating
Blocked Rating
sub-rating in TV-PG, then the
sub-ratings in
TV-14 and TV-MA will automatically be blocked.
Set
Select EXIT Back
ENTER
/
Parental Guide
MPAA Rating
Blocks movies according to the movie ratings limits
specified, so children cannot view certain movies. You
can set the ratings limit by blocking out all the movies with
the ratings above a specified level. Keep in mind that the
movie ratings limit only applies to movies shown on TV,
not TV programs, such as soap operas.
Video
G
PG
PG-13
R
Audio
Channel
NC-17
X
Function
Lock
Allowed Rating
Blocked Rating
1. Press
/
button to select MPAA Rating item.
2. Press /ENTER button and then use
/
button to
select the rating.
Set
Select EXIT Back
/
ENTER
MPAA Rating
3. Press ENTER button to set block or unblock.
CA Eng Rating
Video
Canadian English Language Rating
C
C8+
G
Audio
1. Press
/
button to select CA Eng Rating item.
2. Press /ENTER button and then use
select the rating.
/
button to
PG
14+
18+
Channel
3. Press ENTER button to confirm.
Function
Lock
Allowed Rating
Blocked Rating
Set
Select EXIT Back
/
ENTER
CA Eng Rating
CA Fren Rating
Canadian French Language Rating
Video
G
1. Press
/
button to select CA Fren Rating item.
8 ans+
13 ans+
16 ans+
18 ans+
Audio
2. Press /ENTER button and then use
select the rating.
/
button to
Channel
3. Press ENTER button to confirm.
Function
Lock
Allowed Rating
Blocked Rating
Set
Select EXIT Back
ENTER
/
CA Fren Rating
Owner s Manual 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Other Functions
Brief Info
Brief Info shows the present screen information.
Press DISPLAY button to show the Brief Info on the screen.
Press DISPLAY button or EXIT button to exit.
Function:
Show the present screen information.
Press DISPLAY button or EXIT button to exit.
A: Video resolution
B: Program name
C: Program rating categories
D: program showtime
E: Program title
F: Channel Lable
G:Tuner mode
H:Program details
Using the Guide
The guide allows you to select the channels from a channel
list.
The guide allows provides information about the current
program being shown on each channel(if information is
available from thestation).
Note
Program information in the guide is provided by the
broadcasters. As a result, it may sometimes include only
the channel number, without a program title or description.
A: Program title
B: program options
C: program showtime
D: Program details
E: Program rating categories
30 TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Other Functions
Quick program view
Press to jump back and forth between two channels. The TV
alternates between the current channel and the last channel that
was selected.
1. Suppose the channel number you used just now is 8 and the
channel number youare using is18 (as shownin the figure).
2. If you want to return to the last watched program channel 8,
you can simplypress RECALL button.
3. If you want to return to channel 18, press the button again.
CC (Closed Caption Display)
Closed Captions
Note
The captions do not always use correct spelling
and grammar. Not all TV programs and product
commercials are made for broadcast with Closed
Caption information included. Refer to your area`s
TV program listings for the TV channels and times
of Closed Caption shows. The captioned programs
are usually noted in the TV listings with service
Closed captioning is a process which converts the audio
portion of atelevision program intowritten words which
then appear as subtitles on the television screen. Closed
captions allow viewers to read the dialogue and narration
of television programs.
Using Closed Captions
Captions are the subtitles of the dialogue and narration of
television programs. For prerecorded programs, program
dialogue can bearranged into captionsin advance. Its
possible to caption a live program by using a process called
real-time captioning, whichcreates captions instantly.
Real-time captioning is normally done by professional
reporters using a machine shorthand system and computer
for translation intoEnglish. Captioning isan effective
system for the hearing-impaired, and it can also aid in
teaching language skills.
marks such as CC
.
In ATV mode CCD function allows you to configure the way
you choose to view the digital captioning (Off, CC1, CC2,
CC3, CC4, Text1, Text2, Text3 or Text4).
CAPTION
The term for the words that scroll across the bottom of the
TV screen; usually the audio portion of the program
provided for the hearing impaired.
TEXT
The term for the words that appear in a large black frame
and almost cover the entire screen; usually messages
provided by the broadcaster.
In DTV mode allows you to configure the way you choose
to view the digital captioning(Off,service1,service2,
service3,service4, service5 or service6).
Select one of the digital service channels made available
by the caption provider.
There are 6 standard services. Service 1 is designated as
the Primary Caption Service. This service contains the
verbatim, or near-verbatim captions for the primary
language being spoken in the accompanying program audio.
Service 2 is designated as the Secondary Language Service.
This service contains captions in a secondary language
which are translations of the captions in the primary Caption
Service. The other service subchannels are not
pre-assigned. It is up to the discretion of the individual
caption provider to utilize the remaining service channels.
Owner s Manual 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
USB Input
4.Press the button on the remote control to select the
adjusted item, pressENTER button to confirm.
1.Supporting media andfile format: Digitalpictures (.JPG)
and digitalmusic (.MP3)files
Due to differences in the file code and file mode, It is
possible that some files cannot be read.
2.Before starting operation, verify USB storage device
is of FAT32 and FAT file system format. At present, this
television does not support NTFS and the file systems
of other format.
3
2
1
1.Play or pause;
2.Stop;
3.Repeat;
4.No available;
5.No available;
6.Play previous picture;
7.Play next picture.
PLAY/PAUSE STOP
PREV
REPEAT
NEXT
REV
7
5
6
4
3.External card reader supports most digital cards
available in the market. Readable digital cards are
classified according to the property of card readers and
can be connected to mobile hard disks (working voltage
5.0V, working current not over 500mA).
5.Press EXIT button to return to the previous menu.
Press USB button to exit the USB mode.
Note you may playthe pictures amongselected.
4.The television operation may be halted due to
excessive rate of information code errors. In such case,
restart the system. Please note - there are many
nonstandard USB mobile devices in the market. If a
nonstandard device is used then an identification
problem may occur.
To play music
1.Press
Press ENTER to enter.
/
button to select Music folder.
To play pictures
1.Press USB button on the remote to enter stream media
system.
The system start up takes about 3seconds. Then insert
the USB drivein the USBinput.
2.Press
/
then press ENTER button to enter the play interface.
/
/
button to select desired music, and
2.Press
/
Press ENTER to enter.
button to select Picture folder.
3.Press the button on the remote control to select the
adjusted item, pressENTER button to confirm.
3
2
1
1.Play or pause;
2.Stop;
3.Repeat
4.Fast reverse;
5.Fast forward;
6.Play previous music;
7.Play next music.
PLAY/PAUSE STOP
PREV
REPEAT
NEXT
REV
7
5
6
4
3.Press
then press ENTER button to enter the play interface.
/
/
/
button to select desired picture, and
4.Press EXIT button to return to the previous menu.
Press USB button to exit the USB mode.
2
3
1
Note You may play themusic among selected.
5
6
7
4
1.Play mode: None/Dissolve/Wiperight/Wipe left/Wipe up/Wipedown/Box in/Box out
2.Play time: Short/Medium/Long;3.File name 4.Pause/Play
5. Duration/Rotate 6.Effect7.Infomation
32 TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
USB Input
To play pictures and music together
Insert USB drive with music and picture files in to the USB
input and select the pictures to be played. Then select the
Music folder and choose the MP3 files to be played. Then
select the Music folder and choose the MP3 files to be
played. Please note as some files must be read while
music is being played, the speed of picture operation
response might be affected.
1.Press
/
Press ENTER to enter.
button to select Music folder.
2.Press
/
/
/
then press ENTER button to enter the play interface.
button to select desired music, and
3.Press USB button to turn to the main menu. And then
press button to select Picture folder.
Press ENTER to enter.
/
4.Press
/
then press ENTER button to enter the play interface.
/
/
button to select desired picture, and
5.Press USB button to exit USB mode.
Note Do not remove USB device from the TV untilyou have exited the
USB mode otherwise you may damage the USB device.
Owner s Manual 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
DVD Operation
Basic Playback
Preparations
Advanced Playback
IMPORTANT NOTE:
All described functions a for dvd discs.
If you play other disc Formats the operation and on screen
display will be different.
Press DVD button on the remote control to enter the
DVD status.
Note: Do not insert a disc until the DVD input states open.
SUBTITLE
Basic playback
Press " SUBTITLE ", the screen will display "SUBTI-TLE
01/XX XXXXX", "01" indicates the ordinal number of this
language; "XX" indicates total number
of language; "XXXXXX" indicates the language of country.
(The number of language depends on disc.)
This function can select up to 32 languages display-ed on
screen.
1.Place the DVD in the disc slot. The disc will be loaded
automatically after one to two seconds then the DVD player
reads the DVD and displays the opening menu If there is
no disc placed in DVD mode, OPEN will display on the
screen all the times)
REPEAT
Do not place a disc that is unplayable in this DVD player.
Some discs do not start automatically. Press PLAY/PAUSE
to start playback.
2. Some discs may start playback with a menu. Use the
cursor buttons on the remote control to select menu options
and press PLAY/PAUSE to start. You may also press the
digit buttons to select a menu option directly. Many DVDs will
not allow this during start-up.
Press " REPEAT " and Chapter repeat will be displayed on
screen, the second press will display
Title repeat, the third press will display All repeat, the fourth
press will cancel this function.
ANGLE
When enjoying sports, concert or theatre, press this key to
watch same actions in different angles. (Valid for discs
possessing this function. Using a disc recorded in multi-angle
you can view the scene from different angles, for example, front,
side, whole view
Stop playback
and exterior scene).
D.MENU
Press this key to display the root menu, select items according
to your preference. (This
function will work on a DVD with a multi-layer menu.)
D.CALL
Pressing this key will cycle through "Title Elapsed", "Title
Remain", "Chapter Elapsed", "Chapter Remain" and "Display
off ".
1. Press STOP button to go to stop mode, the TV screen will
show the start logo. With some discs, such as DVD or CDs,
the player can resume playback from the point where it was
stopped.
2. Press PLAY/PAUSE to resume playback from the location
where the playback was stopped.
3. Press STOP twice to stop completely.
Previous and Next
PROGRAM
When playing discs, press "PROGRAM" to enter program
mode. Press the digit buttons to select the program number
that you want. When finished move the cursor to select
"START" . Press PLAY/ENTER to confirm. This will start the
program playback.
During Playing, pressing the PREV button will restart the last
chapter and skip chapters backwards with each subsequent
press until the start of the disc is reached.
Each press of NEXT button during playing will skip the
current chapter and play the next one.
SEARCH
Press "SEARCH" once to display the search menu. Press the
button again to select. Press the program number buttons to
input the item you require. Press ENTER to confirm.
D.AUDIO
Press this key can change the mode of audio.
such as: Audio 1/2: AC 3 2 CH English
Audio 2/2: AC 3 5.1 CH English
Press this button to cycle between Mono Left, Mono Right, Mix-
Mono and Stereo.
Note: When press this button continuously, you must allow a 3
second interval between selections.
Fast forward and Fast reverse
1. Press FWD to fast forward through the disc. Each time
the FWD button is pressed, the fast forward motion speed
changes.
2. Press PLAY/PAUSE to resume normal playback.
3. Press REV to fast reverse through the disc.
Each time the REV button is pressed, the fast reverse
motion speed changes.
4. Press PLAY/PAUSE to resume normal playback.
34 TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
DVD Operation
DVD System Setup
General Setup Process
Special Function Playback
1.Press SETUP button, the general set up page will be
displayed press twice the preference page will be
displayed.
JPEG DISC PLAYBACK
When a disc containing standard JPEG picture files is
inserted into the player, a navigation menu will be
2.Press
the submenu.
3.Press
/
to select, the item, then press to enter
displayed automatically. Use the
/
cursor buttons to
/
to select then press ENTER to confirm.
select a file then press ENTER. The slide show will
commence.
Press PREV or NEXT to move between pictures. Press
pause to stop on the current picture. Press ENTER to
resume normal playing.
4.Press SETUP repeatedly to exit the set-up menus.
NOTE: Preference page will be displayed when there is
no disc in the unit. To access this page, press SETUP
button twice.
A JPEG disc contains JPEG (.jpg) format picture
information that can be decoded by a micro-computer
software and displayed through the video output
interface or on the television screen.
This function has many applications. For example one
can save files from a scanner or digital camera in the
JPEG format, record these on a CD-R disc and present
them to an audience through this player.
..Preference Page..
..General Setup Page..
Parental
Password
Default
1 Kid Saf
2 G
3 Pg
4 Pg 13
5 Pgr
6 R
Tv Display
Angle Mark
Osd Lang
Caption
LB
4
3/Ps
3/Lb
9
On
4
ENG
On
16
7 Nc17
8 Adult
Screen Saver Off
The JPEG format is a convienient method to store
images in a small amount of memory space, and is ideal
for archiving information.
General Setup Page
SCREEN SAVER FUNCTION
ASPECT RATIO DESCRIPTION
This unit employs a screen saver mode to help protect
the tube during static video pictures. This can be turned
off on the GENERAL SETUP PAGE.
When using the DVD with the internal TV,
select 4 3/LB.
The following information applies only when the DVD
output is connected to an external TV.
4:3/PS (PS = Pan and Scan)
You may select if you have a normal aspect ratio (4:3) TV,
although the NORMAL/LB (letter box) is a more common
choice. In PS mode, wide screen material will fill the
screen, but at the expense of chopping off extreme left
and right edges of the original film picture. For this
feature to work, the disc must be specially coded. Such
discs are uncommon.
4:3/LB (LB = Letter Box)
You may select this if you have a normal aspect ratio
(4:3) TV. Wide screen material will be shown in pure
unaltered form, allowing the entire picture area of the
original film to be viewed without any side cropping.
Black bars will appear above and below the picture.
16:9
You may select this if you have a wide screen (16:9) TV.
Back bars may still appear above and below the picture
even if using a wide screen TV. This is because some
film directors prefer to use ultra wide screen aspect
ratios e.g. 2.35:1. This will normally be indicated on the
DVD packaging.
Owner s Manual 35
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
DVD Operation
DVD System Setup
DEFAULT:
Resets all settings (except password and parental lock status)
for this DVD player
back to the manufacturers original settings. Press ENTER to
General Setup Page
perform the reset.
Note:
Some functions may not be available depending on the type
of disc.
ANGLE MARK: Users can select a particular camera angle
when playing a DVD which offers multiple angles.
This item allows you to set Angle Mark ON or OFF.
On Screen Display (OSD) Language:
Users can select on-screen display language.
Playable Discs
CAPTION:
This function allows you to display or hide the caption.
The following discs can be played:
SCREEN SAVER:
If the screen saver is on, then there will be an animated
picture of DVD on the screen whenever the DVD player is
idle for more than 3 minutes .
Preference Page
The Preference Page is only available when there is no disc in
the player.
PARENTAL:
The parental control function works in conjunction with the
different censorship classes assigned to DVDs. These
classes help to control the types of DVDs that the family
watches, There are up to 8 censorship classes for DVDs.
Note:
1 To change this setting you must enter your password.
(Initial password is 1234)
2 When set to OFF, all discs may be viewed.
..Preference Page..
1 Kid Saf
2 G
3 Pg
4 Pg 13
5 Pgr
6 R
Parental
Password
Default
Support discs: DVD, CD-R, CD-RW, HDCD, JPEG, CD+G,
Kodak CD , W MA.
7 Nc17
8 Adult
You cannot play discsother than those listed above.
You cannot play non-standardized discs, even if they may
be labeled as above.
PASSWORD CHANGE:
You can change your password by entering 4 digits. You
must confirm the 4 digits before the new password can be
accepted.
The performance of CD-R or CD-RW disc is depend on
the way of disc was burned. In a few cases, their
performance may not be consistant or may not even
operate at all.
Note:
If you forget your password or a password is accidentally set
enter 1369 as the password.
This will enable you to regain control.
This DVD Player is designed and manufactured according to
the Region Management Information that is recorded on a DVD
disc. If the Region number described on the DVD disc does
not correspond to the Region number of this DVD Player, this
DVD player will not play that disc.
..Preference Page..
Parental
Old Password
New Password
Confirm Pwd
Password
Default
Change
This Region number of this DVD Player is .
1
36 TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
DVD Operation
Discs Protection and DVD Characteristics
ON STORING DISCS
ON HANDLING DISCS
STRUCTURE OF DISC CONTENTS
ON CLEANING DISCS
Compare DVD disc with other discs:
DVD
LD
SVCD
VCD
CD
Digital/
MPEG
Encode
method
Digital/MPEG
Digital
Digital
Analog
Single- Double Single- Double-
side
-side
side
side
650MB
650MB
650MB
Capacity
single- single double- double-
layer
4.7G
-layer layer
layer
17G
8.5G
9.4G
Single-side
60 minutes
double-side
120 minutes
133
242
266
484
minutes minutes minutes minutes
45 minutes 74 minutes 74 minutes
Playing Time
Disc diameter
12cm
12cm
12cm
12cm
30cm/20cm
No more than
430 line
Horizontal
resolution
No more than No more than
More than 500 line
350 line
250 line
Picture
proportion
One kind
One kind
Multiple kinds
32 kinds
One kind
16 kinds
at most
Subtitle
4 kinds
4 kinds
at most
4 kinds
at most
Language
8 kinds
2 kinds
2 kinds
48KHz, 96KHz/
6, 20, 24bit
44.1KHz/
16bit
44.1KHz/
16bit
44.1KHz/
16bit
44.1KHz/
16bit
Sound quality
Owner s Manual 37
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Maintenance
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have
your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1. Here`s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water
and a little fabric softener or dish washing detergent. Wring the cloth until it`s almost dry, and then use it to
wipe the screen.
2. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure not to use a wet cloth.
Extended Absence
If you expect to leave your TV dormant for a long time (such as a vacation), it`s a good idea to unplug the power
cord to protectagainst possible damagefrom lightning orpower surges.
38 TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Product Specification
HLC26R1/HLC32R1
Resolution
1366X768(Dot)
120V~ , 60Hz
Power requirement
Stand-by Consumption
Color system
less than 1W
NTSC
ATSC
75 ohm
Clear QAM
External Antenna Impedance
Color
16,770,000(256 steps of each R, G and B)
Operating Temperature Range
Operating Humidity Range
32~104 F(0~40 C)
Less than 80%
Maximum Elevation
6561 feet (2000m)
Dimensen(WXDXH) Unit:inches/mm
(Including stand)
MODEL
Weight(pounds/kg)
26.1X8.0 X19.7inches
662X202X501 mm
30.9/14.0
38.6/17.5
HLC26R1
HLC32R1
31.3X9.2 X22.9inches
796X233X582 mm
The specifications shown above may be changed without prior notice for quality improvement.
Owner s Manual 39
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Troubleshooting
For the sake of time and cost, it is strongly recommended that you check out the problem by yourself according to
the instructions listed hereunder before contacting the after-sales service for technical assistance.
Verify if the television is properly plugged.
Verify if the television is properly supplied power.
Verify if electricity is available.
No picture, no sound
Blank screen
Verify if correct signals are input.
Press INPUT button to change signal input to TV input.
Restart the television of power supply is interrupted.
Press Mute button and verify if Mute mode is set.
Switch to other channel and verify if the same problem
happens.
No sound
Press VOL+ button to see if the problem can be solved.
Verify if sound system is correct. Refer to Page 22 for
adjustments.
Poor sound
Verify if correct channel is selected.
Adjust the antenna.
Make adjustments by Fine Tune and Manual Scan.
No picture in some
channel
Verify if the same problem exists in other channels.
Check out of picture and sound systems.
Refer to relative instructions in the Manual for color
adjust.
No color for some
channel program
(black and white)
Verify if the antenna is correctly connected.
Verify if the antenna is in good condition.
Make fine adjustment of channel.
Spots with some or
all pictures
Check for local interference such as an electrical
appliance or power tool.
Horizontal/vertical bars
or picture shaking
Disconnect the television from power supply and, 10
seconds later, connect the television to the power supply.
If the problem still exists, contact authorized after-sales
service for technical assistance.
Television out of control
Note: Do not leave the television with static picture in an extended period as the image may become permanently burned.
Note: Production of the LCD screen requires high and precision technologies. However, there might be some dark or bright
(red, blue or green) spots, or some anomalistic stripes or spots. This is not defect. If the TV set is used in an area 2,400
meters above the sea level where the air pressure is below 750hpa, the picture on the LCD screen may be affected and a
muffled sound might be produced. These phenomena might happen in the area 1,500 meters above the sea level. This is
resulted from difference between air pressures inside and outside the display. This is not a defect covered by the limited
warranty.
40 TV LCD-TFT
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
Warranty
Responsibility of Haierto the purchaserwith
respect to the product, and shall
This Haier brand product, when shipped in
its original container, will be free from
defective workmanship and materials, and
agrees that it will, at its option, either repair
the defect orreplace the defectiveproduct
with a new or re-manufactured equivalent at
no change to the purchaser, for parts or
labor for the periods set forth below:
constitute full satisfactionof all claims,
whether based oncontract, negligence, strict
duality or otherwise. In no event shall Haier
be liable, or in any way responsible for any
damages or defectsin the productwhich
were caused byrepairs or attemptedrepairs
performed by anyone other than an
authorized service center or dealer; nor shall
Haier be liable, or in any way responsible
for incidental or consequential economic or
property damage. Some states do not allow
the exclusion of incidental or consequential
damages, so that above exclusion may not
apply to you.
This warranty does not apply to the
appearance of the product or the exterior of
the product, which has been damaged or
defaced, altered or modified in design or
construction. It does not apply to the
additional excluded items set forth below:
The warranty commences on the date the
item was purchased and the original
purchase receipt must be presented to the
authorized service centerbefore warranty
repairs are rendered.
THIS WARRANTYGIVES YOU
SPECIFIC LEGAL RIGHTS. YOU MAY
ALSO HAVE OTHER RIGHTSWHICH
VARY FROM STATE TO STATE.
The limited warranty described herein is in
addition to whatever implied warranties may
be granted to purchasers by law. ALL
IMPLIED WARRANTIES INCLUDING THE
WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR USEARE LIMITEDTO THE
PERIOD(s) FROM THE DATE OF PURCHASE
SET FORTH BELOW. Some states do not
allow limitations on how long an implied
warranty lasts, so the above limitation may
not apply to you.
Warranty period for this product:one year parts
and labor.
Additional items excludedfrom warranty
coverage: non-rechargeable batteries.
Where to obtain service: For the location of
the nearest Haier authorized service center or
to obtain productliterature, accessories,
supplies or customer assistance,
please call 1-877-337-3639.
What to do to obtain service: ship or carry in
your product to an authorized service dealer
or center .Be sure to have proof of purchase.
If you ship the product, be sure it is
packaged carefully.
Neither the sales personnel of the seller nor
any other person is authorized to make any
warranties other than those described herein,
or to extend the duration of any warranties
beyond the time period described herein on
behalf of Haier.
Haier America
New York, NY 10018
The warranties described herein shall be the
sole and exclusive warranties granted by
Haier and shallbe the soleand exclusive
remedy available to the purchaser. Correction
of defects in the manner and for the period
of time describedherein, shall constitute
complete fulfillment of all abilities and
Owner s Manual 41
Download from Www.Somanuals.com. All Manuals Search And Download.
R
Download from Www.Somanuals.com. All Manuals Search And Download.
|