Read Me First
for the ProCurve Switch yl Module (J8694A)
Software Release K.11.01 or Later Is Required on Your Switch 3500yl and
6200yl
For installation information refer to the ProCurve Switch yl Module Installation Guide.1
1
The latest edition is always available in PDF format and downloadable as described in “View or Download the Software Manual Set” on page 1.
X2 Transceiver Operating Temperature Variance
The X2 transceivers are rated at a lower operating temperature {(0°C to 40°C (32°F to 104° F)} than the
6200yl and 3500yl switches or the yl module {0°C to 55°C (32°F to 131°F)}. Therefore when an X2
transceiver is installed in a yl module in a 6200yl or 3500yl Switch, it lowers the temperature rating
of the module and the switch to equal the rating of the transceiver.
Note
Hot swapping the yl module is not supported. See the ProCurve Switch yl Module Installation Guide
for more information.
View or Download the Software Manual Set
The printed yl module Installation Guide shipped with your ProCurve product describes installing, minimally
configuring, and troubleshooting. For further software feature and configuration information, please visit the
ProCurve Web site, where you can freely view or download the latest software manuals for your product. To do
so:
2. To display the list of downloadable manuals, follow these links: Technical support > Product manuals (all) >
ProCurve Switch 3500yl and 6200yl Series. You may want to bookmark this Web page for easy access.
You can also register on the My ProCurve portal to receive a set of ProCurve manuals on CD-ROM. To register
and request a CD, go to www.procurve.com and click on My ProCurve. After registering, click on My Manuals.
Download from Www.Somanuals.com. All Manuals Search And Download.
|