made for you
15” LCD TV + DVD PLAYER
GULCD15S/DVD
INSTRUCTION MANUAL
Thank you for buying a Grundig product
Helpline : 0870 920 1101
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
Caution
Risk of electronic shock
Do not open
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead symbol within an equilateral triangle is intended
to alert the presence of uninsulated "dangerous voltage" within the product's
enclosure that may be of a sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
Caution
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9. If the plug is not suitable or does not fit the socket in your home consult a qualified
service agent.
-3-
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
10. Protect the power cord from being walked on or pinched particularly at plugs,
AC power outlets, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods
of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally,
or has been dropped.
。
。
15.Use this product within 5 C - 40 C , and relative humidity 20-80%.
16. Unit should not be exposed to liquids of any kind.
17.Unplug the power supply unit from the mains when leaving unattended for
a long period such as a holiday.
18. Contact service center if the picture displayed by the unit is getting dimmer.
19. Don't place the unit on an uneven surface. Make sure it is at least 6 inches
from the wall.
20. Keep unit away from direct sunlight.
21. Don't put heavy materials on top of the unit.
22. Do not place unit in confined spaces such as a book case.
23. The rating plate is at the center of the back cover of the apparatus. It will
not be seen when the apparatus is mounted on the wall.
24. Keep away from naked flames !
25. When using this product as a Computer monitor, health and safety experts
recommend short frequent breaks rather than occasional longer breaks.
For example a 5 - 10 minute break after an hour of continuous use is likely to
be better than a 15 minute every 2 hours.
26. This product is designed for domestic use only and is therefore NOT suitable for
commercial use.
27. Do not expose this television to dripping or splashing or place any object filled
with liquids, such as vases on the television.
28. Do not use chemical solvents or strong detergents when cleaning this appliance
as these cleaners may damage the cabinet.
-4-
Download from Www.Somanuals.com. All Manuals Search And Download.
Conformity and Compliance
ELECTRICAL CONNECTION
For your safety please read the following information.
Warning:
This appliance must be earthed by connecting to a mains power outlet with
a protective earthing connection.
The appliance must be connected to a 220-240 volts 50 cycle AC supply by
means of a three pin socket, suitably earthed and should be protected by a
3 amp fuse in the plug or a 3 amp fuse in the consumer unit.
Never use a fused mains plug without the fuse cover.
Never put a naked flame source near or on the television.
If the mains plug is unsuitable for the socket outlet in your home or is removed
for any other reason, then the plug should be disposed of SAFELY to prevent the
hazard of electric shock.
If a fuse is fitted to the plug, remove the fuse before throwing the plug away.
How to wire a UK mains plug.
The appliance is supplied with a BS1363 plug fitted with a 3 Amp fuse.
should the fuse require replacement, it must be replaced with a fuse
rated at 3 Amp and approved to BS1362.
Important
The wire in the mains lead on this appliance are colored in accordance with
the following code:
Green and Yellow Earth
Blue Neutral
Brown Live
As the colors may not correspond with the markings identifying the terminals
in your plug, proceed as follows.
The green and yellow wire must be connected to the terminal in the plug which
is marked with the letter E or with the earth symbol
yellow.
or colored green and
The blue wire must be connected to the terminal marked N.
The brown wire must be connected to the terminal marked L.
-5-
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions And Reminders
Don't place the TV in confined
spaces or in a box when using it.
Place unit on even surfaces.
6 inches
Unplug immediately if there is
malfunction such as no picture, no
video/audio, smoke, bad odor
from TV.
Don't Insert any object inside
the TV box such as metals or
flammable materials.
Don't open the TV cabinet.
-6-
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions And Reminders
Do not cover or block any vents and
Remember to unplug the power cord from
the power outlet before cleaning the
display unit. Only use recommended
cleaners do not allow water to remain on
the screen as it could cause permanent
damage.Only use a lightly dampened
cloth to clean the LCD screen.
openings. Inadequate ventilation may
shorten the life of the display unit or
cause overheating.
Always remember to protect the screen
from finger prints.
Do not use chemical solvents.
Make sure to unplug the unit when
not in use for a long period of time (days).
Avoid direct sunlight, dusty, high
humidity and smoky areas.
Notice for Remote Controller
Avoid Dropping
Avoid Liquids
Avoid Aerosol Cleaners
-7-
Download from Www.Somanuals.com. All Manuals Search And Download.
Wall Mounting the Set
The wall mount set (Optional)
Contact a professional installer if you are unsure about wall mount installation.
Improper installation may cause injury and damage the display unit.
Caution:
When removing unit stand, place the display panel face down on a
soft fabric to avoid damaging the unit.
Wall Mount Procedures
Use standard VESA plate mounting for wall mount.
Please mount this product solidly on the wall or pole.
1. Remove the back cover of the base stand.
2. Loosen screws on base stand.
3. Detach TV from the base stand.
4. Wall mount the set.
3
1
2
4
The holes for VESA plate mounting (Total 4 holes)
(Screws and vesa plate)
Warning:
To prevent injury, this apparatus must be securely
attached to the wall in accordance with the installation
instructions.
-8-
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Model No.
Panel
GULCD15S/DVD
Panel Size
15"
Aspect Ratio
Resolution
4:3
1024 x 768(XGA)
Brightness
250 nits
Contrast Ratio
500:1
Viewing Angle (H/V)
Response Time(Tr+Tf)
RF system
120/100
25ms
TV function
PAL,SECAM
Broadcasting System
Channel Coverage
Type
B/G,D/K,I,L/L'
46.25MHz~862.25MHz
Video System
VBI support
PAL,SECAM,NTSC3.58,4.43
Teletext
TOP/FLOF/WST
Closed Caption
De-Interlace
Yes
Video Feature
Audio Feature
3D
Signals Supported
Component (576i), HD via Component (576p/720p),
Composite, Y-C, YPbPr, RF
Stereo System
Volume/Bass/Treble/Mute control
Audio Input
A2(B/G,D/K)/NICAM(B/G,D/K,I,L/L')
Yes
AV, SCART, Tuner,Line
Speaker Output
RF-IN
2 x 2 W
I/O Connection
1
SCART-IN
1
Component(YPbPr)-IN
AV -IN
1
1
S-Video IN
1
PC - D-Sub IN
Line - IN(for PC)
ATS(Auto tunning system)
CANAL+ function
Sound Auto Detect Display
Auto Adjust(PC mode)
Channel Editing
Channel Up
1
1
User Feature
Yes
Yes (France only)
Yes
Yes
Yes
User key(TV)
Yes
Channel Down
Volume Up
Yes
Yes
Volume Down
Menu
Yes
Yes
Source
Yes
Power
Yes
EJECT
User key(DVD)
Yes
FR
Yes
FF
Yes
STOP
Yes
PLAY/PAUSE
TV/DVD
Yes
IR control
Yes
Slot-in,(MPEG2)
AC adapter(AC100~240V)
DVD
Yes
DC12V/5A
Power Supply
Power consumption
Dimensions
Weight(net)
Accessories
40W
W x H x D
450mm x 352mm x 190mm
5.2 kg
Remote control unit, power cord, manual, battery, power adapter
-9-
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Functions
Key(s)
TV / DVD
AV
Functionality
Turns the TV on and off.
Press to switch remote control inputs
between TV or DVD mode.
Use to select an input source.
Opens and closes the disc tray.
Number (0-9)
I-II
Use number (0-9) buttons to create stations and
preset programs.
Changes the sound output for TV programs.
Switch between Stereo, SAP (Second Audio Program),
or Mono for audio simulcasts.
The TV program must support the output option.
The key is exit in OSD function.
ZOOM
Press to change screen size.
STATUS
Press to display the current channel and
audio/video settings.
A / CH
Returns to the previous channel.
Performs the sleep timer function : press button to
set timer to 30, 60, 90,120 minutes or OFF settings.
Press to access Teletext function.
Press to temporarily cut off the sound.
Displays the DVD OSD menu.
SLEEP
T.T
MUTE
DVD SETUP
Cursor keys (
To move the cursor up/down/right/left to scroll
through a list of options.
)
Displays the main on-screen menu.
Press to increase/decrease or menu control key.
Also advances to the next/preceding chapter or track.
searches forward/backward through the disc.
Press to increase or decrease the volume, or
left and right in menu control.
MENU
(VOL+, VOL-)
VCD 2.0 playback PBC function on/off.
When playing a disc, displays the disc's menu.
Cycle through available channels in either
up/down sequence, or up and down in menu control.
Accesses the subtitle icon in the info display.
Accesses the DVD disc guide.
PBC
DVD MENU
(CH+, CH-)
SUBTITLE
TITLE
Disc play/pause.
Press to select options in DVD disc menu.
Stops playback.
ENTER
To overlay text onto a TV programme.
Access the Teletext index.
MIX
INDEX
HOLD
Stop from advancing to the next Teletext subPage.
Press again to continue moving through
the Teletext sub pages.
Show hidden information. Press again to conceal
the information.
REVEAL
Change the size of Teletext.
SIZE
Direct access Teletext linked page key.
RED, GREEN,
YELLOW, BLUE
CANCEL
Exit Teletext mode.
Select a Teletext sub page, then enter desired page number
to begin page search.
SUBCODE
-10-
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel Buttons
Front Panel
1
2
Function Keys
3
4 5 6 7
8 9 10 11 12
Power key:
Press once to turn on. Press again to return to
stand by mode.
Power indicator:
Stand by mode displays amber. Power on
displays green.
1
2
3
7
Play/Pause key:
Disc play/pause and enter key.
IR Receiver:
Aim at the IR receiver window when using
Remote Controls.
8
9
Eject key:
Opens and closes the disc tray.
Channels / Cursor Up/Down keys:
Press - to select channels from high to low,
and press + to select channels from low to high.
When OSD menu displays, these two keys
enable selection of menu items.
Stop key:
Press to stop DVD playback.
10
11
12
FF key:
Press to search forward through the DVD.
Volume Control / Setting keys:
4
Press - to decrease volume, and press +
to increase volume. When OSD menu displays,
these two keys enable change of setting levels.
FR key:
Press to search backward through the DVD.
Menu key:
Press to display the Menu. Press again to
exit the Menu.
5
6
Source key:
Press this button to cycle through:
TV ª DVD ª SCART ª PC ª HD ª AVª S-Video
modes.
-11-
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel Inputs
Rear Panel
Antenna
S-Video
Y
Pb
L
Pr
R
Video
Power
Audio in
VGA
Antenna Input Socket : 75Ω type coaxial cable connector.
Y Pb Pr Input Socket : Connect appliances with component output.
AV (Video / L / R) Input Socket : Connect with DVD player or VCR AV output.
S-VIDEO Input Socket : Connect appliances with S-VIDEO output.
SCART Input Socket : Connect DVD player or VCR AV output.
VGA Input Socket : Connect with VGA socket of PC.
PC Audio Input Socket : Connect with Line Out socket of PC.
Power: Input socket connect with AC power cord.
-12-
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick TV Set-Up Guide
10
Adjusting the view angle
Press down on the stand and gently adjust the set to a
suitable viewing angle.
The LCD TV monitor can be tilted 10 degrees backward.
Power connection
1. Connect adaptor to power input of TV.
2. Connect adapor to power cord.
3. Connect the other end of power cord to power supply.
POWER
Connecting to An Aerial
75
Connect antenna or CATV cable to the antenna port
of the tuner box.
Turning ON/OFF the TV
1. If power input is connected correctly, the LED on the front panel becomes Amber
(i.e. stand-by mode). Press the POWER button on the function panel OR press
the red POWER button “ ” of the remote control. The TV will switch on and the
LED on the front panel becomes green.
2. To switch the TV off, press the POWER button on the function panel OR press the
red POWER button “ ” of the remote control. The TV will switch off and go to the
stand-by mode.
Auto Scan channels
1. Press the AV key and select input source to TV.
2
5
4
2. Press the MENU key on the remote control to show the On Screen
Display Menu (OSD).
3
4
3. Press u t key to select the TV icon on the top of screen.
4. Press p q key to high-light Auto Scan option. Then press u key to
select the Auto Scan option.
1
5. Once scanning is finished, press MENU to exit.
If you would like the channels on certain numbers please refer to 'Manual scan' on
page 24.
-13-
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Connecting Guide
●
This product includes SCART, AV, S-VIDEO, YPbPr input
sockets to connect with DVD player, VCR, DV Camera to obtain
better picture quality.
●
●
Input jacks and source selection need to match correctly for display
of correct picture.
Video and Audio jacks are color-coded:
Video........................................... Yellow (Y)
Audio (L)..................................... White (W)
Audio (R)..................................... Red (R)
Y.................................................. Green
Pb................................................ Blue
Pr................................................. Red
Connection Instruction
1. Connect home entertainment appliance with appropriate SCART / AV / S VIDEO
/ HD / PC input jacks.
2. Press AV key on the remote or the SOURCE button on the TV to select one of the following:
TV à SCARTà PCà YPbPrà AVà S-VIDEO
Using SCART Input for DVD Player/ VCR
Antenna
(OUT to TV)
VCR/DVD PLAYER
DVD
/
SVCD
/
VCD
/
CD
/
MP3 PLAYER
POWER
OPEN/CLOSE
REW FWD
TAXT
ON
D
I
G
I
T
A
L
O
U
T
OFF
VOL.1
VOL.2
PLAY
STOP PAUSE
SOUND
MIC1
MIC2
S-Video
+
+
NOTICE
Please refer to DVD player or
VCR manual for more detailed
connecting instructions.
-14-
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Connecting Guide
Using YPbPr Input for DVD Player / VCR
DVD
/
SVCD
/
VCD
/
CD
/
MP3 PLAYER
POWER
OPEN/CLOSE
PLAY
REW FWD
TAXT
ON
D
I
G
I
T
A
L
O
U
T
OFF
VOL.1
VOL.2
STOP PAUSE
SOUND
MIC1
MIC2
+
+
R
L
R
G
B
R
G
B
Y
Pb
L
Pr
R
Video
Power Audio in
VGA
R
L
Using S-VIDEO for DVD Player / VCR
DVD
/
SVCD
/
VCD
/
CD
/
MP3 PLAYER
POWER
OPEN/CLOSE
PLAY
REW FWD
TAXT
ON
D
I
G
I
T
A
L
O
U
T
OFF
VOL.1
VOL.2
STOP PAUSE
SOUND
MIC1
MIC2
+
+
Antenna
S
R
L
S-Video
S
Y
Pb
L
Pr
R
Video
Power Audio in
VGA
L
R
-15-
Download from Www.Somanuals.com. All Manuals Search And Download.
PC Connection
Connecting PC Instructions
1. Video Signal Connection:
Connect VGA signal cable to VGA input socket of the TV and VGA output of the
computer.
2. Audio Signal Connection:
Connect audio signal cable to AUDIO IN jack on the TV and LINE OUT jack of the
computer sound card.
PC AUDIO IN
VGA PORT
Y
Pb
L
Pr
R
Video
Power Audio in
VGA
Supported Resolutions
Operating Instructions
Resolution
Refresh Rate
MODE
1. Turn on the TV with the power switch.
2. Press the AV button on the remote twice to
select PC mode.
3. Turn on computer, and the PC Desktop will be
displayed.
640X480
60
VGA
640X480
75
60
75
60
70
75
800X600
800X600
1024X768
1024X768
SVGA
XGA
When the user switches the PC to a
resolution which is not listed ,the screen
will display the message “OUT OF RANGE”.
1024X768
Please wait for 10 to 15 seconds, the
computer will return back to the previous
resolution.
When the PC/VGA signal is lost, the
power indicator will flash alternate
colours, denoting a waiting condition.
The user can switch the computer to
another source or return to a supported
VGA signal.
-16-
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Settings: Menu
(for all modes)
:
19KP10-H9 V . 51
TV
Refer to table for brief description of each option.
OSD H Position: Adjust OSD horizontal position
OSD V Position: Adjust OSD vertical position
Transparency: Adjust OSD background transparency
OSD Timeout: Adjust OSD showtime setting
Language:
Adjust OSD language settings
(English/French/Dutch/Italian/German/
Czech/Slovak)
Version:
Display system information
MENU
Certain properties of the On Screen Display (OSD) can be changed from this menu.
The above table describes the function of each option in this menu.
1. Press MENU on the remote.
2. Select the MENU option with the LEFT / RIGHT keys on the remote.
3. Select the option you want to change with the UP / DOWN keys on the remote.
4. Change the values of the selected option with the LEFT / RIGHT keys.
5. You can exit this menu by pressing the MENU key on the remote twice.
-17-
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control of TV and DVD
The remote control has two modes of operation, one for TV and one for DVD.
Switching between the two modes is achieved by using the TV / DVD button
on the remote control.
The TV / DVD button works like a toggle switch. One press switches the
remote to DVD mode and the second press switches the remote back to
TV mode.
An indicator appears in the top left hand corner of the TV screen to tell you
what mode the remote is in. If the wrong indicator appears just press the
TV / DVD button again.
To see the DVD picture, press the TV / DVD button until the "TV RC" indicator
appears on the top left of the screen then press the AV button once. After a
short pause the DVD picture will appear. To operate the DVD player you must
put the remote into DVD mode. To do this, press the TV / DVD button until the
“DVD RC" indicator appears on the screen.
For DVD operation see page 26 and for TV operation see page 19.
TV/DVD button
AV button
To return to the TV picture or select a picture from an external input.
1) Press the TV / DVD button to see "TV RC" on the screen.
2) Press the AV button to select the input you require ( see page 22 )
-18-
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Settings: Screen & Inputs
There are 3 sections in the OSD menu:
Press MENU button to show up the OSD menu.
Press MENU button again to exit.
(1)Main Menu:
presst u to select
option icons.
(2)Option Menu:
Press ▲▼ to
select options.
Press t u to
decrease or
increase value.
(3)Information:
Display information.
PC
640 X 480
59.9 HZ
OSD Settings: Picture
(for AV, S-VIDEO, SCART, & TV input)
(for YPbPr input)
(for PC input)
Refer to table for brief description of each option.
Brightness:
Contrast:
Sharpness:
Saturation:
Hue:
Brighten or darken picture
Deepen or soften picture
Sharpen or soften picture
Adjust color saturation
Adjust color intensity
H-Position:
V-Posision:
Phase:
Adjust horizontal position of the picture
Adjust vertical position of the picture
Adjust phase
Recall:
Return to system default settings
Adjust the Time and Date
Clock:
Auto Adjust:
DOS Mode:
Adjust picture automatically
Change display system, Text/Graphic options
If you are not happy with your settings and cannot get the picture
as you like you can return to factory default settings by selecting
the RECALL option.
-19-
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Settings: Color
Press TV/DVD button to ensure remote is in TV mode (see "Remote Control of TV and DVD").
(for YPbPr input source)
PC
640 X 480 59.9 HZ
Refer to table for brief description of each option.
Color:
9300/6500/5500/User Color options
Increase Red Highlights
R Gain:
G Gain:
B Gain:
Increase Green Highlights
Increase Blue Highlights
R Offset: Decrease Red Lowlights
G Offset: Decrease Green Lowlights
B Offset: Decrease Blue Lowlights
OSD Settings: Color
Color GAIN can be used to correct color casts in the highlights of a picture and
color OFFSET can be used to correct color casts in the lowlights of a picture.
Example, the “red gain” control will alter the red content in the brighter parts of the
picture leaving the lower brightness parts unchanged and the “red offset”
will alter the red content of the lower brightness parts of the picture leaving
the brighter parts unchanged. The same applies for the Green and Blue options.
1. Press the MENU key on the remote.
2. Select COLOR with the RIGHT arrow key on the remote.
3. Select the option you want to change with the UP / DOWN keys on the remote.
4. Alter the values with the LEFT / RIGHT arrow keys on the remote.
5. You can EXIT this menu by pressing the MENU key on the remote twice.
NOTE:
When navigating the Menus you can use the controls on the TV, the Channel
buttons can be used as the UP / DOWN ( select option ) and the Volume buttons
can be used as the LEFT / RIGHT( alter value )
-20-
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Settings: Audio
Press TV/DVD button to ensure remote is in TV mode (see "Remote Control of TV and DVD").
(for ALL modes)
TV
640 X 480
59.9 HZ
Refer to table for brief description of each option.
Volume: Adjust sound volume
Bass:
Treble:
Adjust lower-pitched sound performance
Adjust higher-pitched sound performance
Balance: Adjust to emphasie left or right speaker
Mute: Temporary cut off sound
OSD Settings: Audio
From the AUDIO menu you can set various options for the sound.
Volume, Bass, Treble and Balance levels can be changed, you can also mute
the sound.
1. Press the MENU key on the remote.
2. Select AUDIO with the RIGHT arrow key on the remote.
3. Select the option you want to change with the UP / DOWN keys on the remote.
4. Alter the values with the LEFT / RIGHT arrow keys on the remote.
5. You can exit this menu by pressing the MENU key on the remote twice.
NOTE:
When navigating the Menus you can use the controls on the TV, the Channel
buttons can be used as the UP / DOWN ( select option ) and the Volume buttons
can be used as the LEFT / RIGHT( alter value )
-21-
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Settings: Input Selection
Press TV/DVD button to ensure remote is in TV mode (see "Remote Control of TV and DVD").
(for ALL modes)
Refer to table for brief description of each option.
Input
PC:
Peripheral Equipment
PC (desktop/laptop)
Function
Change to PC(VGA) signal
Change to YPbPr (Component) signal
Change to AV (Composite) signal
Change to S-VIDEO signal
Change to TV signal
YPbPr:
AV:
VHS, DVD player, etc.
VHS, DVD player, camcorder, etc.
VHS, DVD player, etc.
S-VIDEO:
TV:
SCART:
TV cable, TV signal box, etc.
VHS, DVD player, etc.
Change to SCART signal
INPUT SELECTION
You can choose which input source to use directly from this menu option.
1. Press the MENU key on the remote.
2. Select INPUT with the RIGHT arrow key.
3. Select the input source you want to use from the available list.
4. Activate the selected source by pressing the RIGHT arrow key.
5. You can EXIT the source menu by pressing the MENU key twice.
-22-
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Settings: TV Setting
How to operate the on-screen menus and set-up the television.
Press TV/DVD button to ensure remote is in TV mode (see "Remote Control of TV and DVD").
(for TV mode)
This menu is only
available when TV
input is selected
(see “Input selection”
on previous page).
Refer to table for brief description of each option.
MTS:
STEREO/MONO/DUAL1/ DUAL2 options available
Manual Scan:Scan for channels manually
Auto Scan: Scan for channels automatically
Set Channel: Select channel for setting
Channel:
Label:
Perform edit on channel
Channel labeling edit
Favorite:
Tracking:
System:
Option:
Favorite channel set-ups available
Perform tracking for finer pictures
TV regional settings
IRC, HRC, Auto FineTune options available
MANUAL SCAN：
LABEL：
FAVORITE：
FAVORRITE :
Move
Label
Select 01/15
MANUAL SCAN
No
01
02
03
04
05
06
07
08
Ch
01
02
03
04
05
06
07
08
Freq
48.25
55.25
62.25
69.25
76.25
83.25
105.25
112.25
TV CHANEL
TV System
Serch
01
SECAM
48.25
L
TV
Refer to table for brief description of each option.
MANUAL SCAN:
Select channel
TV Channel:
TV System: Select system
Search:
LABEL:
Select frequency
Select letters to rename channel labelings, then select
SAVE&EXIT to confirm or EXIT to cancel changes.
FAVORITE:
No:
Favorite channel No.
Channel number
Channel frequency
Channel labeling
Ch:
Freq:
Label:
-23-
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Settings: TV Setting
Press TV/DVD button to ensure remote is in TV mode (see "Remote Control of TV and DVD").
MTS, option sets the audio mode ( STEREO or MONO )
1. Press the MENU button on the remote.
2. Select the TV menu with the LEFT / RIGHT arrow keys on the remote.
3. Select MTS with the UP / DOWN arrow keys on the remote.
4. Use the LEFT / RIGHT arrow keys on the remote to select STEREO or MONO.
MANUAL SCAN, to tune channels manually
1. Press the MENU button on the remote.
2. Select the TV menu with the LEFT / RIGHT arrow keys on the remote.
3. Select MANUAL SCAN with the DOWN arrow, then press RIGHT arrow
on the remote.
4. TV channel is highlighted, select the programme Number you want to tune with
the LEFT / RIGHT keys on the remote.
5. Press the DOWN arrow key and make sure PAL I is selected (UK) using
the remote arrow keys.
6. Press DOWN key to select SEARCH and then press the LEFT / RIGHT
keys to search.
7. If the channel found is the wrong one, resume tuning with the remote
RIGHT / LEFT keys.Repeat until the required channel is found.
8. Repeat steps 4 to 9 for each of the channels you want to tune.
9. When you have tuned in your channels you can EXIT the tune menu
by pressing the MENU button on the remote three times.
Note: Please check that the SYSTEM setting is set to UK before tuning
for the pictures to look correct.
AUTO SCAN, to tune channels automatically
1. Press the MENU button on the remote.
2. Select the TV menu with the LEFT / RIGHT arrow keys on the remote.
3. Select AUTO SCAN with the DOWN arrow, then press RIGHT arrow
on the remote.
4. Tuning will start and the channels found will be stored sequentially. E.G.
the first channel found will be stored as programme 1, the second
will be programme 2 ETC.
5. When all the available channels have been found you will be dropped
into the FAVORITE menu where you will need to Sort
and Label the channels.
6. See the section on favorite
SET CHANNEL, channel skip
1. Press the MENU button on the remote.
2. Select the TV menu with the LEFT / RIGHT arrow keys on the remote.
3. Select SET CHANNEL with the DOWN arrow key on the remote.
4. Select the channel you want to Skip / UN-Skip with the remote
LEFT / RIGHT buttons.
5. Select CHANNEL with the DOWN arrow key and with LEFT / RIGHT
keys set ACTIVE(UN-Skipped ) or ERASED (Skipped ).
6. A Skipped Programme will not be able to be accessed by the channel
step buttons on the remote or TV but can be selected by the number
buttons on the remote.
7. To exit the menu, press the MENU button twice.
-24-
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Settings: TV Setting
Press TV/DVD button to ensure remote is in TV mode (see "Remote Control of TV and DVD").
LABEL, re-name programmes
1. Press the MENU button on the remote.
2. Select the TV menu with the LEFT / RIGHT arrow keys on the remote.
3. Select SET CHANNEL with the DOWN arrow key on the remote.
4. Select the channel number you want to NAME with the remote LEFT / RIGHT buttons.
5. Select LABEL with the DOWN arrow key and press RIGHT arrow key to enter this option.
6. Use the LEFT / RIGHT keys to highlight the character you require then press the MENU key
to enter the character into the channel name displayed at the top left of the screen.
7. When you have finished naming the channels use the DOWN arrow to highlight the sub menu
at the bottom of the screen SAVE & EXIT then press the MENU button to memorize and exit.
FAVORITE, Sorting channel order
1. Press the MENU button on the remote.
2. Select the TV menu with the LEFT / RIGHT arrow keys on the remote.
3. Select FAVORITE with the DOWN arrow key on the remote then press RIGHT arrow to enter.
4 Use the UP / DOWN keys on the remote to select the channel you want to sort to another position.
5. Press the RIGHT arrow key and “MODIFY” will flash in the top right of the screen.
6. Use the UP / DOWN keys to move the channel to the required position.
7. Press the LEFT arrow key to memorize the current position of the channel you have just moved.
8. Repeat steps 4 to 7 until all the channels are in the order that you require.
9. To exit press the MENU key on the remote 3 times.
TRACKING, Fine tuning channels
1. Press the MENU button on the remote.
2. Select the TV menu with the LEFT / RIGHT arrow keys on the remote.
3. Select TRACKING with the DOWN arrow key on the remote then press RIGHT / LEFT keys to
fine-tune the current programme displayed on the screen.
4. Exit the menu by pressing the MENU key twice.
SYSTEM, Setting the transmission System
1. Press the MENU button on the remote.
2. Select the TV menu with the LEFT / RIGHT arrow keys on the remote.
3. Select TRACKING with the DOWN arrow key on the remote then press RIGHT / LEFT keys to
select UK from the available options.
4. Exit the menu by pressing the MENU key twice.
OPTION, Automatic frequency control
1. Press the MENU button on the remote.
2.Select the TV menu with the LEFT / RIGHT arrow keys on the remote.
3.Select OPTION with the DOWN arrow key on the remote then press RIGHT / LEFT keys to select
NORMAL or AUTO fine-tune.Auto is recommended.
4.Exit the menu by pressing the MENU key twice.
NOTE:
When navigating the Menus you can use the controls on the TV, the Channel
buttons can be used as UP / DOWN ( select option ) and the Volume buttons
can be used as the LEFT / RIGHT( alter value ).
-25-
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Operation and Settings
BASIC OPERATIONS
Inserting and Ejecting DVD Discs
1) Press TV/DVD button to ensure remote is in TV mode :
“TV RC" appears on-screen. (See "Remote Control of TV and DVD".)
2) Select DVD picture by pressing the AV button once or
by using the INPUT SELECT menu.
3) Press the TV/DVD button until "DVD RC" appears in the top left of the screen.
The remote is now in DVD mode.
4) Insert the disc into the disc slot (make sure the label side faces backwards).
Auto-play function starts as soon as the disc is inserted.
5) Press
to eject the disc.
;
4
Play/Pause
Press the Play/Pause button to toggle between PLAY and PAUSE modes..
:
<
Stop
Press the STOP button to stop disc playback.
:
u u
u u
Picture Scan
:
1)Press the LEFT/RIGHT arrow keys to scan through the disc quickly.
2)When the button is pressed again, the scanning speed increases
until the maximum scanning speed is reached.
Press play to resume playing the Disc.
:
:
:
Skipping Chapters
Press the LEFT or RIGHT arrow keys
or next chapters.
:
:
to skip to the previous
Title Menu
If the current title contains a title menu, press the TITLE button to
access the title menu after a short pause.
-26-
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD OSD Menu
DVD OSD Menu Descriptions
1) To access the DVD OSD menu, press the TV/DVD button.
2) Press the DVD SETUP button.
There are six option icons available across the top of the screen.
3) Press the LEFT and RIGHT arrow keys ( left / right of the MENU
button) to select the available options.
4) Press the UP and DOWN arrow keys (above / below the MENU button)
to select the available options.
5) Press the ENTER button to confirm the selected option.
6) Press the Left arrow key until you re-enter the main choices
across the top of the screen.
(1) General Set-up Page
.. General Setup Page ..
TV Display
OSD Lang
Go to General Setup Page
l TV Display
Three options are available:
-normal / PS : 4:3
.. General Setup Page ..
TV Display
OSD Lang
Normal/PS
Normal/LB
Wide
-normal / LB: fake 16:9
-wide : proper 16:9
Set TV Displlay Mode
l OSD Languages
Language menu options:
seven languages
available
.. General Setup Page ..
TV Display
OSD Lang
English
French
Spanish
German
Portuguese
Italian
Dutch
Set OSD Laanguage
-27-
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD OSD Menu
(2) AUDIO SET-UP PAGE:
.. Audio Setup Page ..
Speaker Setup
Equalizer
3D Processing
Go To Auddio Setup Page
l Speaker Set-up Downmix has three settings:
.. Speak Setup Page ..
Downmix
LT/RT
Stereo
V SURR
-
LT/RT: Left Total/ Right Total Sound
-Stereo: Stereophonic Sound
-V SURR: Virtual Surround Sound
NOTE:
LT = Left channel sound from both
speakers.
Set Downnmix Mode
RT = Right channel sound from both
speakers.
l Equalizer
There are eight types of preset
equalizers to choose from:
(None, Rock, Pop.......)
NOTE:
.. Equalizer Page ..
EQ Type
None
Rock
Pop
Live
The Equalizer settings alter the
characteristics of the sound,
choose the setting that sounds
best to you.
Dance
Techno
Classic
Soft
Set Equaliizer Type
l 3D Processing This option allows the user to
select its reverberation
mode amongst 8 possible
choices: (Off, Concert,
Living room, Hall.......)
.. Set Equalizer Type ..
Reverdd MMooddee
OOffff
Concert
Living Room
Hall
Bathroom
Cave
Arena
NOTE:
Church
The Reverb mode adds
various effects giving the
impression of being in a
church or in a concert hall
ETC, default setting is OFF.
Reverb Mode
-28-
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD OSD Menu
(3) VIDEO SET-UP
.. Video Setup Page ..
Compoonent
Quality
Go To Video Setup Page
.. Video Setup Page ..
Component
Quality
OFF
YUV
RGB
l Component The user can choose to apply component
video (OFF), output YUV signal (YUV) or
output RGB signal (RGB).
Compoonent
l Quality
Select Quality to access the video quality
set-up menu. This menu will allow you to
choose amongst seven options and
modify the quality of the video
.. Video Setup Page ..
Sharpness
Brightness
Contrast
Gamma
Hue
Saturration
Luma DDelay
(sharpness, brightness, contrast, gamma,
hue, saturation, luma delay).
0 T
1 T
Luma DDelay
(4) PREFERENCES
..Preference Page ..
TV Type
Parental
Audio
Subtitle
Default
Go To Preference Page
.. Preference Page ..
TV Type
Parental
Audio
Subtitle
Default
PAL
Multi
NTSC
l TV Type
l Parental
The user can choose the TV
system amongst the three
available (PAL, MULTI and NTSC).
Preferred Audio LLanguage
.. Preference Page ..
TV Type
Parental
Audio
The user may want to use the parental control option
for the DVD player to limit its access.
1 KID SAF
2 G
3 PG
The user first chooses amongst 8 different categories
(KID SAF, G, etc.). Then press ENTER to see the
password box appear. Finally, press the
Subtitle
Default
4 PG 13
5 PGR
6 R
7 NC17
8 ADULT
Set Parental CControl
TV/DVD button and then the T.T. Button before entering
the pass number with the number buttons on the remote
which will restrict access to the category of DVD selected.
-29-
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD OSD Menu
l Audio
Options are available in 8 different
languages (English, French, Spanish,
Chinese, Japanese, Korean, Russian
and Thai). Please note that availability
depends on each DVD original setting.
.. Preference Page ..
TV TypeNTSC
Parental
Audio
Subtitle
Default
English
French
Spanish
Chinese
Japanese
Korean
Russian
Thai
Preferred Audio LLanguage
l Subtitle
Subtitles are available in 8 different
languages (English, French, Spanish,
Chinese, Japanese, Korean, Russian
and Thai). Please note that availability
depends on each DVD original setting.
.. Preference Page ..
TV TypeNTSC
English
Parental
Audio
Subtitle
Default
French
Spanish
Chinese
Japanese
Korean
Russian
Thai
Preferred Audio LLanguage
l Default Reset for factory settings.
(5)PASSWORD SET-UP PAGE
.. Password Setup Page ..
Password Mode
Password
Go To Password Setup Page
l Password Mode
Enter a four-digit password into
the blank box before changing
the On/Off setting. The system
default password is 3800.
.. Password Settup Page ..
Passwoord Mode
Password
On
Off
Passwoord Mode
l Password
Select Change to change password.
Then enter a new four-digit password,
then enter the former password, and
finally reconfirm the former password.
Select OK to confirm the new password
setting. The system default password is 3800.
-30-
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD OSD Menu
(6) EXIT
Exit the DVD set-up menu.
Exit Settup Menu
-31-
Download from Www.Somanuals.com. All Manuals Search And Download.
Teletext Instructions
Teletext is a free information system that displays text on your TV.
It is noteworthy that not all TV stations provide this service.
The time is displayed on the top right corner of the screen.
Using Teletext
Press the “T.T.” button of the remote control. You will directly go into the list
of contents, which is displayed on the TV screen.
Selecting a page of Teletext
1. According to the list of contents, press the appropriate number buttons. The selected
page number is displayed in the top left corner of the screen. The Teletext system
searches for the desired page until it is located.
2. To move the Teletext forward/backward at one page at a time, respectively press
the LEFT and RIGHT arrow keys of the remote control.
Using the Teletext menu of the remote control
1. To select the list of content, press the “INDEX” button.
2. To modify the size of characters displayed on the screen, press “SIZE” button.
3. When a Teletext page contains more information than the screen can contain, the rest
of the information will be displayed after a period of time. Press the “HOLD” button
to stop the automatic page change. Press the “HOLD” button again to resume the
automatic page change. When HOLD is active the hold icon will appear the top left
of the screen
4. To reveal concealed information such as answers on a quiz, press the “REVEAL”
button. Press it again to conceal the information.
5. To have Teletext information superimposed over the TV programme, press the “MIX”
button. Press the “MIX” button again to return to the basic Teletext format (i.e. Black
background).
6. To select a subcode page, first press the “SUBCODE” button on the appropriate page
then press the appropriate digit buttons to require the subcode page. Subcode pages are
subsections of teletext pages which can only be displayed one section at a time.
7. To use fast test, press the appropriate colored buttons (red, green, yellow, blue) to access
the required page quickly. To facilitate the use of Teletext, some sections and topics may
have particular colors.
8. To exit Teletext, press the “T.T.” Button on the remote again.
-32-
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Menu Descriptions
Troubleshooting
Check Item
Symptoms
l
l
l
l
l
l
l
l
Check power adapter and cord is connected properly.
Check power adapter and cord if they have been damaged.
Check if outlet is working.
TV will not turn on / no power:
Unplug TV for a few minutes and turn it on again.
Check batteries are not dead or installed incorrectly.
Check if there are obstructions between remote and TV sensor.
Aim remote control at IR receiver window from 2 inches away.
If failure results from electrical interferences, lighting, or static,
disconnect the TV power cord for 10 seconds before reinstalling it.
Restart your TV.
Remote control failure:
Buttons on TV or Remote
do not work
l
Possible Micro Processor crash disconnect the TV from the mains for
a few minutes then re connect and try again.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Check if in stand-by mode.
No picture and sound:
Picture with NO sound:
Sound with NO picture:
Verify all connections are firmly attached.
Press "AV" key to cycle to the correct input source.
Check volume or mute buttons.
Verify all connections are firmly attached.
Video and audio plugs connected to different sources.
Check brightness and contrast levels.
Adjust picture settings.
Check reception and the antenna.
Make sure S-video terminal has nothing connected.
Check memory setting.
Poor colour tone or NO color:
Check color or picture setting.
Check if program is in correct channel.
Check possible outside interferences.
Check if cable is connected properly.
No reception from Cable:
No picture when playing DVD:
Picture is blurry or snowy:
Check if channels are selected properly.
Check if cable company is experiencing technical difficulties.
Check the DVD disc is not damaged, clean the disc, check for fingerprints
If DVD player supports progressive scan, switch the DVD player
into interlaced mode.
l
l
l
l
Check other channels. Problem may be an isolated incidence.
If using outdoor antenna, please check connection or interference.
Check accessories components (VCR, DVD, etc).
RF signal may be too slow.
-33-
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Menu Descriptions
Troubleshooting
l
l
l
l
l
l
l
l
l
l
l
l
Check brightness level.
Picture too dark:
Check contrast level.
Adjust saturation or hue levels.
Check LCD monitor for possible damage.
The reception may be weak.
Picture is not sharp or the
picture shakes:
The quality of the broadcast may also be bad.
Adjust the antenna to face the correct direction.
Make sure outside antenna has not been disconnected.
Results of two signals, try adjusting antenna direction or location.
Broadcast waves may be reflected from adjacent mountains or buildings.
Video and Audio plugs connected to different sources.
There may be interferences from cars, trains, high-voltage lines,
neo lights, etc.
Picture has ghosts or multiple
pictures:
Picture is spotted or stripes
appear:
l
l
l
l
There may be interference between the antenna cable and power cable.
Try positioning them further apart.
There may be interferences from other devices such as radiors or
cellular phones
Check reception and the antenna .
In low temperature, the picture may leave trails or appear slightly delayed.
This is not a malfunction, the unit will return to normal.
Smearing on fast moving objects:
Disposal
Waste electrical and electronic products must not be disposed
of with household waste. Please refer to the retailer from whom
you purchased this item for disposal instructions.
Batteries and packaging materials should be recycled using
local facilities.
We have made every effort to ensure these instructions are as accurate as possible,
however we apologise for any inconvenience caused by minor inconsistencies
which may occur as a result of product improvement and development.
-34-
Download from Www.Somanuals.com. All Manuals Search And Download.
|