Genz Benz Stereo Amplifier NEOX400 210T User Manual

NEOX400-210T  
O W N E R ’ S M A N U A L  
CONGRATULATIONS !  
Your new NEOX400-210T Combo is designed with the power, features and performance that  
today’s professional bassists desire.  
The solid yet lightweight cabinet construction and powerful Neodymium dual 10”, 250 watt  
loudspeakers provide a solid platform for the versatile, compact NEOX400 amplifier. The circuit  
design, features and physical layout have been carefully calculated to deliver the best performance  
and reliability in bass guitar amplification.  
The NEOX400-210T features sturdy jacks and controls, 12AX7 tube and solid state FET preamps,  
footswitchable channels, tone shaping filters, 5-band active EQ, a balanced direct output and an  
industrial duty bipolar power amplifier with Toroidal power transformer, providing the tools and  
versatility to sound your very best on stage.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
features may be provided with the active pickup, such as equalization, volume control and compression.  
Tuner Output Jack — The “tuner output jack´ is provided to allow a tuner to remain plugged into the amplifier  
while playing. This output remains active when the “mute switch´ is pressed, allowing for tuning your  
instrument while not sending signal to either the “direct output´ or the speaker. Signal level of -30dB (typical  
hot bass level) will drive all known tuners.  
Input Signal Mute Switch — The input on the NEOX400-210T bass amplifier includes an “input mute´ switch.  
With this switch, you can place the amplifier (and the direct output) in standby mode between sets without  
having to change any of your volume settings. This feature is especially handy during the set when using the  
tuner output since you will still be able to use your tuner without having sound come from the amplifier or P.A.  
system. No more re-patching or fumbling in the dark! A red LED turns on when the input mute is active,  
reminding you that you are in “stand-by” mode. This feature is also controlled by the optional 4 button  
footswitch.  
Input Gain Controls & O/L LEDs — The “input gain´ controls, in conjunction with the signal and clip LEDs,  
allow you to adjust the preamp input gain sensitivities to the instrument you are playing. Basses can have an  
output level from a few thousandths of a volt to several volts. Generally, you want to see only an occasional  
flash of the red clip LED when you really hit the string hard, then adjust the master volume control for playing  
volume. Distortion of the preamp gain stage will occur when the red clip LED is illuminated, so plan  
accordingly. The best signal to noise ratio will result with the above method. Setting your playing volume will  
be a combination of the “FET gain control´ (FET channel), “TUBE gain control´ and “TUBE volume  
control´ (TUBE CHANNEL) and the “master volume control´, depending in part on individual preference.  
Intentional overloading of the tube channel may be desirable and the O/L LED indicates that you are operating  
the tube preamp stage in the overdrive mode. The FET and TUBE preamps are switchable and mixable. These  
features are also controlled by the optional 2 button footswitch. Both CHANNEL O/L LEDS are active at all  
times monitoring each channels audio level, independent of channel switch position.  
Signal Shaping Switches and Controls — There are 3 separate shaping filters on the NEOX400-210T. The  
³L.F. EXTEND´ lowers the low frequency roll-off response of the preamp (between 30 and 45 Hz) to allow the  
full effect of 5+ string and extended scale instruments. The amount of extension is adjustable depending on  
the setting of the corresponding control. Use this function with care due to the power of this amplifier. The “MID  
SCOOP´ function introduces a midrange scoop at approximately 800 Hz, with a lower “Q” than typical  
equalization provides. The amount of scoop is adjustable with the corresponding control. The ³H.F. ATTACK´  
function increases brightness and sparkle (approximately 4KHz) of the signal, allowing exaggeration of  
percussive effects and string sound. The amount of attack is adjustable with the corresponding control. All 3  
filters are footswitchable by the optional 4 button footswitch.  
Active 5 Band Equalization — The “active 5 band equalization´ used in the NEOX400-210T amplifiers is  
composed of 1 shelving low frequency control, 3 peaking midrange controls and 1 shelving high frequency  
control. These filters are not interactive and are effective as an advanced tone control system. The filters have  
a cut/boost range of +/- 12dB and a smooth, musical sounding response.  
Low Frequency - 80 Hz  
Low-Mid Frequency - 200 Hz  
Mid Frequency – 500 Hz  
High-Mid Frequency – 1250 Hz  
High Frequency - 4000 Hz  
Master Volume — The “master volume control´ is post-eq, and adjusts the signal level sent to the power  
amplifier. Best results are usually obtained when this control is set between the 9 o’clock and 3 o’clock  
position.  
Master Section Status Indicators —  
· The “power LED´ indicates that the amplifier is on and the low voltage regulated power supplies are active.  
· The “protect LED´ indicates that the amplifier is in “protect” mode and the output relay is de-energized. This  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LED will illuminate for approximately 3 seconds during power switch-on and switch-off. It is normal for this LED  
to glow while continuing to monitor the internal conditions for about 3 seconds after the protection relay has  
closed. It will also illuminate during any internal fault condition. If this happens, turn the amp off and consult a  
repair technician.  
· The “thermal LED´ indicates that the amplifier has overheated, engaged the protection circuit and shut down.  
This circuit is self-resetting when the offending condition (blocked air vents, foreign body stuck in fan, etc) is  
corrected. This LED will also flash for a brief time at turn-on and turn-off, indicating that the amplifier protection  
circuits are operating. An additional feature of this LED is that it will illuminate about 15 degrees F. before  
amplifier thermal shut-down, as a reminder that the operating conditions are too hot.  
· The “signal LED´ indicates that the power amplifier is receiving signal (over several watts output) and all  
is well!  
· The “limit LED´ indicates that the power amplifier has reached maximum power and the limiter threshold  
has been crossed. Driving 6dB beyond this point, the amplifier will gradually begin to clip.  
· The “output limit switch´ engages or bypasses the internal soft clip limiter. This limiter allows simulation of  
output saturation as the amplifier nears its maximum power. The limiting action is particularly musical  
sounding, even when driven hard.  
REAR PANEL  
FEATURES  
Direct Output — This is a studio quality, fully active transformerless balanced “direct output´, with “pre-post  
equalization switch´.  
With the “pre/post switch´ in the “pre” position, the direct output receives its signal directly from the pre-amp  
input buffer amplifier with no tonal modifications. This is a pre gain control, pre eq output, with the best signal  
to noise ratio. Most recording and sound reinforcement companies will want to use this position since changes  
you make to your stage sound will not affect this output.  
With the “pre/post switch´ in the “post” position, the direct output receives its signal from the output of the 5  
band equalizer. This feature allows for additional flexibility in some situations, but is often not desired for  
recording or live sound reinforcement.  
A “ground lift switch´ is provided which opens pin 1 (shield) on the direct output to prevent ground loops. Use  
the position that results in a minimum of noise.  
The output level is nominal line level (adjustable to –30 or 0 dB), pin 2 hot. This output is fully protected from  
the effects of phantom power provided by the mixing console and does not require phantom power to operate.  
Effects Insert Jacks — The “effects insert jacks´ are provided to allow access to the pre-equalization signal  
for the purpose of inserting signal processing equipment such as compressors, chorus, delay & reverb  
processors. “Send´ (output) and “return´ (input) are nominal +4 dB level. “Series” devices (such as  
compressors and gates) require that the signal flow out from the send jack on the amplifier, through the  
processing device and back into the return jack on the amplifier. Parallel or mixed signal devices (such as  
Download from Www.Somanuals.com. All Manuals Search And Download.  
chorus, delay and reverb processors) require that the signal flow out of the send jack on the amplifier, through  
the unit where it is split into a dry (unaltered) signal and a wet (processed) signal. On the processing unit, you  
will use the mixed signal output to return the signals (both wet and dry) to the return jack on the amplifier. The  
ratio between the wet signal and the dry signal is heard as the amount of effects added back to the original  
signal, which is controlled by the mix knob (also called “balance”) on the effects processor. Set the input  
sensitivity on the effects processor according to the processor manufacturer’s instructions. The “effects send  
jack´ may also be used as an auxiliary output to drive a direct box, tape deck etc. This output is  
preequalization, and pre master volume. The “mute switch´ will shut this output down when engaged.  
Foot Switches — The NEOX400-210T is fitted with jacks for two different types of footswitch. The 2-button  
footswitch (included) controls ³channel switch´ and ³channel mix´ functions. Any standard latching 2-button  
footswitch with TIP-RING-SLEEVE connector will work, provided there are no LEDs in the switching path. The  
4-button footswitch uses a 5 pin “DIN” connector and controls the ³mute´ and ³shape filters´. This footswitch is  
unique to Genz Benz due to the complex nature of the functions and must be factory supplied.  
Speaker Output Jacks — The NEOX400-210T features two standard 1/4” speaker jacks plus one Neutrik™“  
Speakon NL-4 connector. Minimum recommended total load impedance is 4 ohms. The total impedance of  
the combo speaker configuration is 4 ohms. It is not recommended that an external speaker cabinet be used  
with this combo. A Phastic plug has been inserted at the factory to prevent the use of this jack.  
CABINET FEATURES  
Construction — Built from domestic and Baltic Birch plywood, the NEOX400 is sold yet lightweight. The  
porting system also strengthens the side panels. Our unique edge-lift handles offer easy transport.  
Speaker Configuration — The NEOX400 combo is loaded with two of our GNX10250, 8 ohm loudspeakers  
and GBE 4941 compression bullet tweeter. This combination is ideal for producing the clarity and versatility of  
the NEOX400 amplifier. Total cabinet impedance is 4 ohms. Use of an additional speaker cabinet is not  
recommended.  
Internal Crossover — The NEOX400-210T uses a 12 db / octave crossover network which includes our LTP  
tweeter protection and a 100 watt tweeter level control.  
SPECIFICATIONS  
Power rating: 425W @ 4 ohms  
Cabinet impedance: 4 ohms  
Frequency response: 45 Hz to 18K Hz  
Dimensions: 28 1/4” H x 21 1/4” W x 16 1/2” D  
Weight: 66 lbs.  
GENERAL SAFETY INFORMATION  
Power is supplied to the amplifier through an IEC type detachable cord set with a mains connector, fuse  
holder and internationally rated 115/230 Volts - 50/60 Hz toroidal power transformer. For our international  
touring players, an external mains line voltage switch is provided, with a fuse size chart printed on the rear of  
the unit denoting the power supply configuration and fuse size that the unit has been rated for. International  
IEC type cord-sets are available for a variety of international power supply sockets. The main’s fuse (and a  
spare) is located in a slid-out drawer in the bottom half of the IEC connector.  
Common sense (as well as the law) dictates that you do not operate the unit where it will be exposed to  
moisture or rain, excessive ambient heat (over 115 degrees F / 40 degrees C) or without a properly grounded  
A.C. power source. Never remove the ground pin from the A.C. power connector.  
Ventilation is required to keep this amplifier from overheating. Do not block air flow over heat-sinks at the  
rear of the unit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTIONS  
· Never set an amplifier on anything that will tip over or collapse under its weight.  
· These amplifiers are capable of producing sound pressure levels that may cause permanent hearing loss.  
· There are no user serviceable parts inside these units. Always consult a qualified service repair facility for  
service. THE HEATSINK MAY BECOME VERY HOT!!! WARNING!! DO NOT TOUCH.  
The use and operation of this device constitutes an agreement of full release of any and all liability connected  
with its use. Only persons familiar with the operation of high-powered audio equipment should attempt to  
operate this device. In addition, by the use of this device, user agrees to hold both GENZ BENZ  
ENCLOSURES, INC and its designers, sales agents and all other affiliates and related parties harmless in the  
event of any accident, injury, damage or loss resulting from such use. Manufacturer’s sole responsibility is to  
provide a warranty on the specified performance of the product under normal conditions for a period of 3  
years.  
THREE YEAR LIMITED WARRANTY  
TRANSFERABLE  
Genz Benz Enclosures warrants the NEOX400-210T speaker enclosures and electronics to be free from  
defects in materials and workmanship, for a period of 3 years from the date of purchase, when purchased  
from an authorized Genz Benz dealer.  
This warranty does not cover wear and tear incurred from the normal designed use of the product.  
This warranty is only effective if a copy of the original sales receipt is presented at the time of warranty  
service.  
This limited warranty is completely transferable to any subsequent buyer as long as the original sales receipt  
is transferred to such subsequent buyer. See your warranty card for all details.  
ALL WARRANTY SERVICE MUST BE PERFORMED BY A GENZ BENZ AUTHORIZED SERVICE CENTER.  
Before returning any unit to the manufacturer for service, a RETURN MERCHANDISE AUTHORIZATION  
(RA#) must be obtained by calling 480-941-0705.  
7811 E. Pierce St. Scottsdale, AZ 85257  
Ph: 480-941-0705 Fax: 480-946-2412  
Rev. 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Electro Voice Portable Speaker MTH 4 64B User Manual
Eton Clock Radio ESP2000 User Manual
Ford Automobile 1999 Escort User Manual
Fostex Computer Drive EX12 User Manual
Frigidaire Microwave Oven FGMC2765K W B User Manual
Fujitsu Dollhouse CM81 00304 5E User Manual
FUNAI CRT Television ST27S3 User Manual
GE Air Conditioner 4100 User Manual
GE Monogram Ventilation Hood ZV755SPSS User Manual
Goodman Mfg Heat Pump GSZ VSZ 13 SEER User Manual