PP972SM
GE Profile™ 36" Built-In CleanDesign Electric Cooktop
Dimensions and Installation Information (in inches)
†Note: Check local codes for required breaker size
KW Rating
13" MAX.
depth
21
36-1/8
Important: Requires a 5" free area between
the bottom of the cooktop to any combustible
material, i.e., shelving. Free area not required
when installing wall oven underneath cooktop.
Refer to installation instructions. Requires a
15" minimum from cooktop to adjacent
overhead cabinets. Units are furnished with
a 48" flexible armored cable.
3-1/4*
8.9
6.7
240V
208V
Cooktop
Breaker Size
30" MIN. to
unprotected
cabinet
19-1/8
40 Amps†
40 Amps†
240V
208V
2
"
MIN.
15" MIN.
to cabinet
clearance to
side wall
33-7/8
1-3/4
rear wall
"
to
from cut-out
Note: 36" Ribbon cooktops are approved for use over GE 30" Single Wall
Ovens and Warming Drawers only. Refer to cooktop and wall oven/
warming drawer installation instructions packed with product for
current dimensional data. If installed with a GE Profile™ Telescopic
Downdraft System, consult both the cooktop and downdraft installation
instructions packed with product before installing. Cooktop gas/electric
supply may need to be re-routed to install downdraft. The countertop
must be at least 26" deep with a flat surface area of 23-1/2" or more,
front to back. In addition, other clearances to the front edge of the
countertop must be considered, especially on raised bullnose countertops.
Consult cabinet and countertop manufacturer’s specs for flush mount
installation prior to install.
2-1/2**
Required
2
"
MIN.
*Depth of unit at conduit connection location (rear) is
6-1/2" on models PP980/950 and 4-5/8" on models
PP975/972/962/945/942/932/912, JP655/356/346.
clearance to
side wall
from cut-out
Cut should
**Raised bull nose countertops may require up to
3/8" additional clearance to prevent interference
with curved front.
not interfere
with cabinet
structure
Electrical junction box 16" MIN.
below countertop
at front
Installation Information: Before installing, consult installation instructions
packed with product for current dimensional data.
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Listed by
Underwriters
Laboratories
220596
Specification Created 10/06
Download from Www.Somanuals.com. All Manuals Search And Download.
|