FEIN Power Tools Vacuum Cleaner 9 55 13 User Manual

FEIN Turbo Vac II  
9-55-13  
9-55-13PE  
Operating Instructions  
/
ATTENTION: READ BEFORE USING  
Make sure that the voltage nameplate of the device corresponds to the voltage of  
your network. The plug has to be protected with a minimum of 15 Amps.  
IMPORTANT! THE VACUUM CLEANER IS SUPPLIED FROM THE  
FACTORY WITH A SUPPLY CABLE WITH A GROUNDED PLUG. IT  
MUST ONLY BE CONNECTED TO AN APPROVED GROUNDED  
SOCKET.  
Before performing any maintenance work, unplug the vacuum from the outlet.  
WARNING! EXPLOSIONAND FIRE HAZARD! Never vacuum flammable  
fluids or gas, oil, alcohol, solvents, etc. Do not operate near flammable fluids or  
gas. Never vacuum warm fluids or materials at more than 140º Fahrenheit  
(60º Celsius), such as burning cigarettes, ashes, glowing coals, etc.  
WARNING! DO NOT VACUUM HAZARDOUS/CARCINOGENIC DUST  
UNLESS THE OPTIONAL HEPA FILTER IS INSTALLED.  
Do not pull the vac by the cable and do not damage the insulation on the cable.  
If the cable is damaged, it must be replaced immediately.  
Always keep the filter cartridge clean so the vacuum cleaner operates properly.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLY INSTRUCTIONS  
To attach the wheels, press the wheel posts  
into the four holes provided.  
a) Connect the vacuum end of hose 2 to  
the receptacle Q by pressing in. In order to  
remove the hose, press button L on recep-  
tacle and pull the hose out simultaneously.  
b) Connect the handle 4 with the hose end 3  
by pressing in. The handle is provided with a  
suction force reducing device. Turn in the  
direction of the arrow. In order to get full  
suction pressure, keep the regulating device  
closed.  
c) Tube extension pieces 5 and accessories  
can be connected by pressure. For disassem-  
bling, slightly turn both parts and draw apart.  
d) To use the optional combination attachment  
1 for hard floors in PVC, linoleum, stone,  
etc. press the switch button with your foot, so  
that the bristles emerge d1. For carpets, the  
bristles have to be retracted d2 .  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
9-55-13 / 9-55-13PE TURBO II VAC  
ITEM # DESCRIPTION  
PART NUMBER  
11  
12  
13  
16  
17  
18  
35  
42  
44  
53  
57  
73  
POWER CORD SET  
SCREW  
3-07-05-065-99-9  
901A11A89  
101035K00  
901A19A89  
901D07AG87  
905217000  
901A16A89  
905391000  
920056000  
521006K13  
905278K15  
905331R00  
CABLE CLAMP  
SCREW  
WASHER  
TERMINAL BLOCK  
SCREW  
CABLE  
BUNGEE  
FACE PLATE  
RECEPTACLE COVER  
AUTO START SWITCH  
AUTO START SWITCH (9-55-13PE) 905490A000  
107  
111  
112  
200  
201  
202  
203  
205  
206  
209  
210  
211  
212  
213  
216  
217  
218  
219  
220  
222  
255  
280  
286  
287  
412  
420  
427  
445  
500  
SWITCH (ON/OFF)  
RECEPTACLE  
905306000  
905398K13  
SWITCH (MANUAL /AUTO)(WIDE) 905307A000  
TOP HANDLE  
521049AK50  
521049B50  
920021B00  
902033000  
521002K13  
902048000  
920042000  
920039000  
902043000  
918M5602U  
905317G02  
902036000  
521003K13  
902032A00  
920038000  
521010K00  
521007K13  
920060000  
920065000  
521052K50  
524301B15  
525002089  
521047K41  
521016A13  
913064AGA6  
921049GN1  
921159AK30  
921047K13  
921048K13  
919067K13  
919066A13  
918V01A001  
COVER WITH HANDLE  
COVER GASKET  
COVER SOUNDPROOFING  
COVER BAFFLE  
SIDE SOUNDPROOFING  
MOTOR GASKET - 110 VOLT  
CHAMBER MOTOR GASKET  
MOTOR SOUNDPROOFING  
MOTOR - 110 VOLT  
CARBON BRUSHES (2)  
MOTOR SOUNDPROOFING  
MOTOR COVER  
MOTOR FILTER  
GASKET - 110 VOLT  
FLOAT  
FLOAT CAGE  
PLUG  
PLUG  
CONTAINER  
BUMPER  
LOCK LEVER  
SWIVELWHEELS  
HOSE RECEPTACLE  
CLOTH FILTER  
16' HOSE  
16' HOSE (9-55-13PE)  
SLEEVE - VACUUM END  
SLEEVE - TOOL END  
CONNECTOR RING  
RING - HOSE  
501  
502  
504  
505  
710  
PNEUMATIC VALVE (9-55-13PE)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SUCTION OF DRY DUST AND DIRT (continued)  
ATTENTION: If suction pressure decreases, replace  
the paper dust bag H with a new one. From time to  
time the filter cartridge G should be cleaned with a  
soft brush, ensuring longer life and higher perfor-  
mance.  
SUCTION OF FLUIDS  
a) First, remove any dirt and dust residue from  
previous cleaning operations from the container.  
Remove the cloth filter or the cartridge filter G and  
replace it with the anti-foam filter R . DO NOT USE  
THE CLOTH FILTER, THE CARTRIDGE FILTER  
OR THE PAPER DUST BAG DURING THE  
SUCTION OF FLUIDS.  
b) In order to guarantee enough air flow, it is recom-  
mended that accessories not be completely immersed  
into the fluids.  
c) When the fluids have reached the highest permitted  
level in the tank, the float regulator F automatically  
blocks suction and the motor gets noisier. Switch the  
vacuum off IMMEDIATELY, pull out the plug,  
remove the suction head from the tank and empty the  
tank.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
9-55-13 / 9-55-13PE TURBO II VAC ACCESSORIES  
Item Part Number  
Description  
1
2
3
4
5
6
7
8
9
919036B94  
921067A13  
921069A13  
921072K13  
919001A13  
919003K13  
919007K13  
921051A13  
921056000  
Extension tube-chrome  
Handle  
Adaptor  
Step adaptor  
Brush  
Upholstery nozzle  
Crevice tool  
Wet brush  
Rubber strip  
10 919064B13  
11 919043R14  
12 90204200  
13 TII1MCRN  
TIIHEPA  
Floor brush with rollers  
Thread pick for brush  
Anti-foam filter  
1Micron filter  
Hepa filter 0.3 microns  
Flange filter  
14 TII3002  
15 TII3001  
Turn screw-filter  
Cloth filter  
16 913064AGA6  
17 913036K01  
18 921086AA13  
19 921087AK13  
20 3916054A089  
21 526300AA13  
Paper dust bag- 3 pack  
Y connector with cap  
Y cap  
Hose cradle  
Basket and strap  
Kits: FBK  
consists  
TIIMCRN 1 Micron pleated filter  
913036A01 Paper dust bag  
TII3002 Filter flange  
of 1 each  
TII3001 Flange turn screw  
FBK-HEPA  
consists  
of 1 each  
TIIHEPA Hepa pleated filter  
913049A01 Hepa dust bag  
TII3002 Filter flange  
TII3001 Flange turn screw  
DW1  
consists  
of 1 each  
(2) 919036B94 Extension tube  
921067A13 Handle  
919007K13 Crevice tool  
902042000 Anti-foam filter  
919001A13 Brush  
921051A13 Wet floor brush  
919003K13 Upholstery Nozzle  
919064B13 Floor brush  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANCE  
After every use:  
.
.
.
Empty the tank (dirt, dust, and fluids).  
Never leave fluids in the tank. This could cause damage to the tank.  
After vacuuming fluids, it is necessary to dry extension pieces, tube  
and motor parts by running the vacuum a few minutes, after having  
emptied the tank.  
.
Always keep a reserve of paper dust bags and filter cartridges, so  
that the vacuum is always ready for use.  
FEIN Power Tools Inc.  
1030 Alcon Street  
Pittsburgh, PA 15220  
(800) 441-9878  
REV. 06-15-06  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Extron electronic Network Card HSA 200 User Manual
Fisher Price Motorized Toy Car 75547 User Manual
Fluke Slow Cooker Ti30 User Manual
Garmin Bicycle Accessories 190 00839 08 User Manual
GBC Radio DPR 25+ User Manual
GE Coffeemaker 681131690690 User Manual
GE Convection Oven ZET1R User Manual
GE Cordless Telephone 26939 User Manual
GE Freezer FUM17SVR User Manual
Generac Power Systems Switch 004635 2 User Manual