45137
Wireless Alarm System
™
Silent Alert
User’s Manual
Choice
ALERT
™
™
Control all Sensors
& accessories from
nload from Www.Somanuals.com. All Manuals Search And Downl
one location
Before connecting or operating the Silent Alert,
please read these instructions carefully and save
this manual for future reference.
Congratulations
The GE Choice Alert™ Wireless Alarm System is one
of the most affordable and expandable wireless
alarm systems available. You’ll discover the system
offers many features typically found in custom
installed Alarm systems.
The Choice Alert system is reliable and easy-to-use.
With Choice Alert you can select from a line of Sensors
and Accessories; start small and expand as you
need, or create a system that meets all your needs.
The Choice Alert System is protected by Priority
Code Selection technology which provides increased
security and trouble-free wireless connections. It
also guarantees the Control Center will only respond
to signals from your Sensors in and around your home,
and prevents anyone from tampering with
your system.
The user manual explains in simple steps how to
install, use and care for your new Choice Alert
Silent Alert.
If you have any questions or would like
additional information please visit our web site
Customer Service Group at 1-800-654-8483.
nload from Www.Somanuals.com. All Manuals Search And Downl
ꢁ
Important safeguards
PreCautions
1. Do not attempt to disassemble the Silent Alert,
unless described in the user’s manual. There are no
user serviceable parts.
ꢀ. Handle with Care – Avoid striking or shaking.
Improper use or storage could damage the Silent
Alert. Modifying or tampering the device or its internal
components can cause a malfunction and void the
Silent Alert’s warranty.
ꢁ. If you feel the Silent Alert or any part of the Choice
Alert system is not operating correctly or as described,
please contact Customer Service for assistance
(1-800-654-848ꢁ).
Introduction
The Silent Alert is an excellent addition the Choice
Alert Alarm system. It can provide an extra level of
awareness for alarm activity as well as keep you and
your family informed about the status of the wireless
alarm. There is no limit to the number of Silent Alerts
that can be added to the system. Suggested discrete
places to position the Silent Alert may be above the
Garage door, above the interior garage door leading
into the house, over or along side a window, under
the eve of a roof line… generally any area that is easy
to notice but secluded enough so only you and your
family know where to look.
nload from Www.Somanuals.com. All Manuals Search And Downl
4
The Silent Alert will only activate once an alarm is
actually sounded. It will not activate during the entry
and exit delay times. It cannot be turned-off unless
it receives a disarm code from the Control Center it
is linked with, or the batteries have been removed.
Once activated it will continue to blink for several days.
It cannot be disarmed even if the Control Center is
unplugged or destroyed.
Parts Check List
Identify all the parts before proceeding.
The Silent Alert is designed to provide a visual
warning BEFORE entering the home if an alarm has
Silent Alert
2 - Screws
2 - Plastic anchors
2 - Rubber gromets
Double sided tape
nload from Www.Somanuals.com. All Manuals Search And Downl
5
been triggered.
You can add any number of Silent Alert LED indicators
to the Choice Alert System. To add a Silent Alert to the
system, you will need to link it with the Control Center.
Adding a Silent Alert™
In order to link the Silent Alert to the Crontrol Center,
you will need to have the Silent Alert and Control
Center near each other.
Step 1 - Open the Silent Alert by gently inserting a
small blade screwdriver into the tab slot on one end
and gently pry upwards. This action releases the
cover from the base. This procedure can be easily
completed once the Silent Alert is mounted as well.
Install two (2) new “AA” batteries according to the
polarity markings in the battery compartment.
Learn button
Step 2 - Press and hold the Learn button inside the
Silent Alert. One of the LED indicators on the front of
the Silent Alert will begin to flash.
Step 3 - While continuing to press the Learn button
in the Silent Alert, press and hold the Mute button
on the side of the Control Center for
nload from Www.Somanuals.com. All Manuals Search And Downl
6
three seconds.
Step 4 - Release all buttons.
The Control Center will sound two beeps
and flash the green power indicator, this
indicates a test signal was sent to the Silent
Alert. When the Silent Alert receives the test
Signal, the LED indicator will stop flashing,
indicating it has been linked with your
Control Center. Reattach the Silent Alert to
the base.
Input DC 12V
+
-
Mute
Learn
Alert
Chime
Off
Anytime the alarm is triggered (in Armed HOME or
AWAY), and the siren sounds, the Control Center will
send a signal to the Silent Alert to begin alternately
flashing its LED indicators. The Silent Alert will continue
to flash the LED indicators until the Control Center
sends a disarm signal.
Note: Even if the Control Center is disconnected from power
or destroyed, the Silent Alert will continue to flash LED
indicators.
Installation
You will need to determine if the surface to mount the
Silent Alert is smooth or rough/porous. If smooth you
can use the included double sided tape. When using
doublesided tape apply to clean dry surface. Remove
one side of the tape and attach it to the back side of
the Silent Alert. Once the mounting surface is ready,
remove the other side of the double side tape and
press into position.
nload from Www.Somanuals.com. All Manuals Search And Downl
7
If the mounting surface is rough or porous, you will need
to use the rubber gromments and screws (included).
Secure the plate to the desired location with the screws.
Smooth surface
Porus uneven surface
Test the Silent Alert
Step 1 - After the Silent Alert has been successfully
linked with the Control Center, press and hold the
Mute button on the Control Center for three
seconds. This action sends a test signal.
Step 2 - When the Silent Alert receives the test
signal from the Control Center, one LED indicator on
the Silent Alert will begin to flash once a second. It
will continue to flash for 30 seconds.
Erasing the Silent Alert from the system
Step 1 - Remove the batteries from the Silent Alert.
Step 2 - With the batteries removed, press and hold
the Learn button.
nload from Www.Somanuals.com. All Manuals Search And Downl
8
Step 3 - While pressing the Learn button, re-install
the batteries. The LEDs will flash rapidly and then
stop. This indicates the Silent Alert has been
removed from the system.
Step 4 - Release all buttons
Low Battery Indicator
When the voltage level of batteries reach low levels,
one LED will begin to flash once every 5 seconds. This
indicates that the batteries need to be replaced.
Model #
45129
Description
Control Center
Silent Alert
Battery Type Battery Life*
(4) “AAA”
(2) “AA”
24 months
18 months
45137
*maximum potential life based upon usage and location
WARNING!
Risk of personal injury
- Prolonged exposure to alarm
siren may cause permanent
hearing loss
Battery Warning!
- Remove batteries before storing
the Alarm or Sensor for extended periods
- Batteries may leak harmful liquids or
ignitable materials or explode causing injury
and product damage
- Do not mix old and new or other battery types
- Replace all batteries at the same time
- Replace fully discharged batteries immediately
nload from Www.Somanuals.com. All Manuals Search And Downl
9
FCC Warning
Any unauthorized changes or modifications to the equipment
would void the user’s warranty and may conflict with both
state and federal laws. The Choice Alert system complies with
part 15 of the FCC rules. Operation is subject to the following
conditions:
1) The Choice Alert system may not cause
harmful interference.
ꢀ) The Choice Alert system may accept any interference
received including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment
and receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver
is connected.
– Consult the dealer or an
experienced radio/TV technician for help
nload from Www.Somanuals.com. All Manuals Search And Downl
10
WARNING
Limitations of Alarm Products
This product should be tested periodically to make sure
it is working properly. The product, if used properly, may
reduce the risk of burglary, robbery, or other adverse events.
However, JASCO is not an insurer, this product is neither
insurance nor a guarantee that such an event will be
prevented, and users should protect themselves with proper
insurance. JASCO makes no representation that this product
cannot be compromised or circumvented, that it will provide
an adequate warning, or that it will prevent any personal
injuries, property damage, or other losses. Like any alarm
product, including expensive commercial systems, it may be
bypassed, it is subject to compromise, and it may fail to warn
for a variety of reasons, including, but not limited to: improper
installation or positioning; improper maintenance; tampering;
dead or improperly installed batteries; sensing limitations;
component failures; receivers; intrusions may be outside
of a product’s designed range and certain environmental
conditions may impact performance and audible alarm
signals may be outside of hearing range, muted by doors,
walls, and floors, unheard by deep sleepers or the hearing-
impaired, or overwhelmed by other sounds.
nload from Www.Somanuals.com. All Manuals Search And Downl
11
is a trademark of the General
Electric Company and is used under
license to Jasco Products Company
LLC, 10 E. Memorial Road,
Oklahoma City, OK 73114.
This Jasco product comes with a
1 year limited warranty. Visit
45137-1
01/09/08
nload from Www.Somanuals.com. All Manuals Search And Downl
|