BATTERY DRIVE, FTP-608 Series
2” HIGH SPEED THERMAL PRINTER
FTP-628MCL113, Easy Load and Mount Method
■ OVERVIEW
The easy loading FTP-608 MCL Series is ultra compact high
speed, battery driven thermal printer, printing on 2-inch wide
paper (58mm) where platens are removable. Our unique
platen removal mechanism improved paper loading and
maintenance.
The FTP-608 MCL series can be used for a variety of
applications, such as portable terminals, POS, ticket issuing
terminals, label printers, banking terminals, and
measurement and medical equipment.
■ HIGHLIGHTS
• Easy loading type
Our original platen removal mechanism improved paper
loading and maintenance.
• Easy mounting platen
The platen unit bracket allows attachment to cover with
screws.
• Ultra compact
Height 15.5 mm, width 75 mm, depth 36.5 mm for the 2
inch model, excluding platen unit.
•
High speed printing
It can print at 60 mm/s (480 dotlines/s) maximum by using
Fujitsu's unique head drive control.
• High resolution printing
8 dots/mm of resolution printing is possible.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-628MCL113
■ SPECIFICATIONS
Specification
Item
FTP-628MCL113
Interface
Conforms to RS232C / Centronics
4.2 VDC to 8.5 V, average current 0.87A (0.93), peak value
Printing ratio: 12.5%, printing speed 50mm/sec. at 7.2 V
For print head
Operating
Voltage
For motor
4.2 VDC to 8.5 V, 1 A maximum
5 VDC ± 5%, 0.1 A maximum
75.1 x 38.4 x 15.5 mm (with platen set)
69.3 x 52 x 15 mm
For logic
Printer mechanism
Interface board
Printer mechanism
Interface board
Dimensions
(WxDxH)
Approximately 51g
Weight
Approximately 20g
Pulse resistance: 100 million pulses/dot (under our standard
conditions). Abrasion resistance: paper traveling distance
50km (print ratio: 25% or less)
Head life
Operating temperature*
Operating humidity
Storage temperature
Storage humidity
0˚ C to +50˚ C
20 to 85% RH (no condensation)
-20˚ C to +60˚ C (paper not included)
5 to 95% RH (no condensation)
Operating
environment
Head temperature
detection
Detected by thermistor
Detection
function
Paper out/mark detection Detected by photo-interrupter
Platen open/close
Slide switch
High sensitive paper:
TF50KS-E4 (Nippon Paper)
TK50KS-E (Nippon Paper)
PD150R (Oji Paper)
Standard paper:
FTP-020P0701 (58mm)
TK60KS-F1 (Nippon Paper)
FTP-020P0102 (58mm)
Medium life storage paper: PD170R (Oji Paper)
AFP220VBB-1 (Mitsubishi
Paper)
Recommended thermal sensitive paper
PD160R-N (Oji Paper)
AFP-235 (Mitsubishi Paper)
TP50KJ-R (Nippon Paper)
Long life storage paper:
HA112AA (Nippon Paper)
*+5˚C to +40˚C printing density assurance rance (-25 to 70˚C capability)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-628MCL113
■ FUNCTION
Item
Item
8. Mark detection function
9. MCU operation abnormality detection
1. Test print function
2. Paper out detection
3. Paper near end detection
10. Power ON/OFF sequence protection
11. Motor over-current protection
12. Hardware timer
Thermal head temperature abnormality
detection
4.
5. Blow-out fuse detection
6. Head voltage abnormality detection
7. Motor power saving function
■ DIMENSIONS
1. Printer mechanism
FTP-628MCL113
Center of paper
1.0
(note 4)
1.0
(note 4)
40.6
75.1
(34.5)
(width of main shaft)
(width of main body
except platen shaft)
74.7
40.5
at lever open
at lever lock
10.7
34.2
58.0
24.0
(paper end sensor)
(platen sensor)
S
S
33.7
62
(5)
open lever
Note: 1. Dimensions are nominal value (tolerance ±5 unless otherwise specified).
2. Dimension listed in ( ) is for reference
3. S shows the standard center line
4. Platen shaft moves right and left, Please make the space of it about 1mm between
the cover and platen shaft.
Unit: mm
4
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-628MCL113
■ DIMENSIONS
2. Platen Unit
center of paper
50.0
44.4
34.0
Oblong hole 1.2
(positioning holes)
4.5
S
(34.5)
40.6
75.1+0.2
Unit: mm
3. Interface board
Unit: mm
5
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-628MCL113
■ PRINTER CONNECTOR (FLEXIBLE PT BOARD) PIN ARRAYS
FTP-628 MCL113
Thermal head, control circuit side connector: 52610-3090 Molex or equivalent product
No
1
Signal
I/O Contents
PHK
VSEN
PHE
SW1
SW2
VH
—
I
Cathode for photo interruptor
2
paper sensor power
3
O
Emittor for photo interruptor
4
—/I Platen release switch
—/I Platen release switch
5
6
—
Head drive power
—
7
VH
8
DIN
I
I
Data in
9
CLK
Synchronous clock for communication
10 GND
11 GND
12 STB6
13 STB5
14 STB4
15 VDD
16 TH
—
—
I
Ground power supply for thermal head
Thermal head energizing control signal
I
I
I
Logic power
O
O
I
Thermally sensitive resistor input termnial 1
Thermally sensitive resistor input termnial 2
17 TH
18 STB3
19 STB2
20 STB1
21 GND
22 GND
23 LAT
24 DO
I
Thermal head energizing control signal
I
—
—
I
Ground power supply for thermal head
Data latch
Data out
O
I
25 VH
Power supply for thermal head
26 VH
I
27 MT/A
28 MT/A
29 MT/B
30 MT/B
I
I
Stepping motor excitation signal
I
I
Do not plug or unplug the FPC when power is on.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-628MCL113
Europe
Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Fujitsu Components Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Fujitsu Components
International
Headquarter
Offices
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Asia Pacific
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (1-408) 745-4970
Fax: (65) 6273-3021
Email: [email protected]
Email: [email protected]
© 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered
trademarks of their respective owners. Rev. 5/25/2004.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
|