Fisher Price Bicycle T6209 User Manual

T6209  
Please keep this instruction sheet for future reference,  
as it contains important information.  
Adult assembly is required.  
Tools required for assembly: Phillips Screwdriver,  
Hammer and Scrap Block of Wood (not included).  
Age: 2-5 years  
Weight limit: 55 lbs (25 kg).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
CAUTION  
This product contains small parts  
in its unassembled state.  
Adult assembly is required.  
Straight Axle Assembly  
PUSH  
Seat  
3
Bottom View  
Turn the frame upside down.  
• Insert the straight axle assembly through the holes in the  
rear of the frame.  
Frame  
1
Wheel  
• Fit the seat onto the frame. Push firmly near the back end  
(Flat Side First)  
of the seat to "snap" it into place.  
Bushing  
(Grooved Side Down)  
Straight Axle  
Bushing  
(Smooth Side First)  
Rear  
Wheel  
(Indented  
Wheel Hub  
(Pointed End First)  
4
Wheel Hub  
Side Down)  
(Flat Side Down)  
Turn the assembly upright.  
• Slide a bushing, smooth side first, onto the end of the  
straight axle.  
• Slide a wheel, flat side first, onto the end of the straight axle.  
• Slide a wheel hub, pointed end first, onto the end of the  
straight axle.  
Straight  
Axle  
Straight  
Axle  
Cap Nut  
2
• Place one end of the straight axle into the cap nut. Tap  
the end of the straight axle with a hammer. Make sure  
the cap nut is securely attached to the straight axle.  
• Slide a wheel hub, flat side down, onto the straight axle.  
• Slide a rear wheel, indented side down, onto the  
straight axle.  
• Slide a bushing, grooved side down, onto the straight axle.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
Pedal Hub  
Pedal Axle Tab  
Pedal Hub  
7
• Fit two pedal hubs onto the pedal axle tabs. Make sure  
the tabs fit into the slot in each pedal hub.  
• While holding the pedal hubs on the pedal axle, insert the  
pedal axle into the hole in the center of the front wheel.  
• Press the pedal hubs into the center of the front wheel  
until they are flush with the surface of the front wheel.  
5
• Repeat this procedure on the other side with the other  
two pedal hubs.  
• Fit the cap nut on the end of the straight axle.  
Tap the cap nut with a hammer. Gently pull the rear  
wheel to be sure the cap nut is securely attached to  
the straight axle.  
Fork Arms  
Hint: You may need the help of another adult to hold the  
other end of the straight axle in place.  
Front Wheel  
Assembly  
Groove  
Fork Cover  
Pedal Axle  
8
Wheel Hub  
• Place the front wheel assembly between the fork arms.  
Make sure the pedal axle fits into the groove at the bottom  
of each fork arm.  
• Place a fork cover over the pedal axle on one fork arm.  
• Insert two #8 x ¾" screws into the fork cover and tighten.  
• Repeat this procedure to attach the other fork cover to the  
other fork arm.  
Wheel Cap  
6
• Fit the tabs on the wheel cap into the slots in the wheel  
hub. Push to "snap" the wheel cap in place.  
• Repeat this procedure to attach the other wheel cap to  
the other wheel hub.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
Label Decoration  
Fork Post  
5
5
Back  
Fork Cover  
9
3
• Insert the fork post up through the hole in the neck of the  
frame. Make sure the fork is positioned so that the fork  
covers face the rear wheels.  
Fork Post  
Handlebar Front  
Handlebar Back  
¾" Screw  
¾" Screw  
2¼" Screw  
Front  
• Wash your hands before applying the labels.  
• Make sure the areas where the labels will be applied are  
clean and dry. Wipe your vehicle with a clean, soft, dry  
cloth to remove any dust or oils.  
• For best results, avoid applying a label more than once.  
• Apply the labels as shown in the illustration above.  
• After applying a label, rub the label firmly with a cloth to  
make sure the label is adhered to your vehicle.  
10  
• Fit the handlebar front to the fork post.  
Hint: The handlebar front is designed to assemble to the  
fork post one way.  
• Fit the handlebar back to the fork post and handlebar  
front. Hold them together firmly.  
• First, insert the remaining #8 x ¾" screws through the  
outer holes in the handlebar back and tighten.  
• Then, insert the #8 x 2¼" screw through the center hole  
in the handlebar back and tighten.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Label Decoration  
Consumer Information  
• Periodically, check the plastic parts and if broken or  
cracked, dispose of them properly.  
6
• Periodically, check all fasteners regularly to be sure they  
are tight. If the fasteners are not tight, tighten them  
as necessary.  
2
4
To clean, use a mild soap and water solution and a clean  
cloth. Rinse clean with water to remove soap residue.  
IMPORTANT! It is a good practice to start training children  
very young regarding the importance of helmet use. When  
children are older and riding bicycles and faster vehicles,  
it is important that they use a helmet each and every time  
they ride. For this reason, even while riding a tricycle, it is  
a good idea to familiarize your child with helmet use,  
so that it becomes a habit for life. Choose a helmet that  
complies with requirements of the applicable certifying  
agency for bicycle helmets.  
Right Side  
CONSUMER ASSIS
T
A
NCE  
1-800-432-5437 (US & Canada)  
1300 135 312 (Australia)  
7
1
4
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.  
Hearing-impaired consumers: 1-800-382-7470.  
Outside the United States:  
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,  
Great Britain: Mattel UK Ltd, Vanwall Business Park,  
Maidenhead SL6 4UB. Helpline: 01628 500303.  
Mattel Europa, B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.  
Australia: Mattel Australia Pty. Ltd., 658 Church Street,  
Locked Bag #870, Richmond, Victoria 3121 Australia.  
Left Side  
New Zealand: 16-18 William Pickering Drive,  
Albany 1331, Auckland.  
Based on the Railway Series by The Reverend W Awdry.  
© 2010 Gullane (Thomas) Limited. Thomas the Tank Engine & Friends and Thomas  
& Friends are trademarks of Gullane (Thomas) Limited. © HIT Entertainment Limited.  
HIT and the HIT logo are trademarks of HIT Entertainment Limited.  
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.  
©2010 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc., unless otherwise indicated.  
PRINTED IN MEXICO  
T6209a-0920  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Escient Switch LS102 User Manual
Escort Radar Detector S2 User Manual
Fisher Price Bathroom Aids N4283 User Manual
Fluke Landscape Lighting 293860 User Manual
Furman Sound Power Supply 16 E User Manual
Gateway Computer Monitor VX755 User Manual
GBC Binding Machine CC2700 User Manual
Gianni Industries Door L NH300 User Manual
Gigabyte Network Card GA 73PVM S2H User Manual
Global Upholstery Co High Chair Pivotback User Manual