Fujitsu LifeBook
T Series
BIOS Guide
LifeBook T Series Model:
T3010/T3010D
Document Date: 09/16/03
Document Part Number: FPC58-0992-01
F U J I T S U P C C O R P O R AT I O N
1
Download from Www.Somanuals.com. All Manuals Search And Download.
M a i n M e n u
P O I N T S
■
If your tablet emits a series of beeps that sounds like a
code and the display is blank, please refer to the Trou-
bleshooting section of your system Use’s Guide. The
Troubleshooting Section includes a list of error mes-
sages and their meanings.
■
If your data security settings require it, you may be
asked for a password before the operating system will
be opened.
3. If an error message is displayed on the screen, and
you want to enter the setup utility, press the [F2] key.
4. When the setup utility starts with a fault present, the
system displays the following message:
Warning!
Error message
[Continue]
5. Press any key to enter the setup utility. The system
will then display the Main Menu with current
parameters values.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
T
S e r i e s T a b l e t P C
MAIN MENU – SETTING STANDARD SYSTEM PARAMETERS
The Main Menu allows you to set or view the current
system parameters. Follow the instructions for Navi-
gating Through The Setup Utility to make any changes.
(See Navigating Through the Setup Utility on page 2 for
more information)
the field’s function and any special information needed
to help understand the field’s use. Note that the actual
drive labels shown may vary.
P O I N T
System Time and System Date can also be set from your
operating system without using the setup utility. Use
the calendar and time icon on your Windows Control
panel or type time or date from the MS-DOS prompt.
The following tables show the names of the menu fields
for the Main menu and its submenus, all of the options
for each field, the default settings and a description of
PhoenixBIOS Setup Utility
Main
Advanced
Security
Boot
Info
Exit
Item Specific Help
System Time:
System Date:
[02:34:56]
[09/03/2003]
Adjust calendar clock.
Primary Master
Language:
[TOSHIBA MK4021GAS-(PM)]
[English (US)]
<Tab>, <Shift-Tab>, or
<Enter> selects field.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 1. Main Menu
Table 1: Fields, Options and Defaults for the Main Menu
Menu Field
Options
Default
Description
System Time:
–—
–—
Sets and displays the current time. Time is in a 24 hour format
of hours:minutes:seconds with 2 digits for each. (HH:MM:SS).
Example: 16:45:57. You may change each segment of the time
separately. Move between the segments with the [Tab] key and/or
[Shift] + [Tab] keys.
System Date:
–—
–—
Sets and displays the current date. Date is in a month/day/year
numeric format with 2 digits each for month and day and 4 digits
for year. (MM/DD/YYYY) for example: 03/20/1998. You may
change each segment of the date separately. Move between the
segments with the [Tab] key and/or [Shift] + [Tab] keys.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
M a i n M e n u
Table 1: Fields, Options and Defaults for the Main Menu
Menu Field
Options
Default
Description
Primary
Master:
The product # of
the Hard Drive
Display the type of device on this ATA/ATAPI interface, if there is
one. Pressing the Enter key selects the Primary Master submenu
allowing additional device configuration options for this interface.
Selects Primary
Master submenu
■
Language:
English (US)
Japanese (JP)
[English (US)]
The default setting differs between the US/European and the
Japanese model. Selects the display language for the BIOS.
■
5
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
T
S e r i e s T a b l e t P C
Primary Master Submenu of the Main Menu
The Primary Master submenu identifies what ATA
devices are installed.
Note that actual hard drive label shown may vary.
Depending on the drive type, information such as cylin-
ders, heads and sectors may also be displayed.
PhoenixBIOS Setup Utility
Main
Primary Master [TOSHIBA MK4021GAS-(PM)]
Item Specific Help
Type:
[Auto]
LBA Format
78140160
40008MB
Select ATA/ATAPI drive
installed here.
Total Sectors:
Maximum Capacity:
[Auto]
The BIOS auto-types the
drive on boot time.
Multi-Sector Transfers:
LBA Mode Control:
Transfer Mode:
[16 Sectors]
[Enabled]
[Multiword DMA 2]
[Disabled]
Except [Auto]
You enter parameters of
the drive.
Ultra DMA Mode:
[None]
The drive is disabled.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 2. Primary Master Submenu
Menu Field
Options
Default
Description
■
■
■
■
Type:
Auto
None
CD-ROM
Hard Disk
[Auto]
Selects the ATA/ATAPI device type. Select Auto to have the type
automatically identified by the BIOS at POST. If None is selected, all
of the following Set-up items do not appear. Select CD-ROM if a
CD-ROM drive is installed at this connection. If Hard Disk is
selected, you must specify the number of Cylinders, Heads, and Sec-
tors for the drive.
LBA Format
Logical Block Addressing (LBA)
Total Sectors:
---
---
The total number of sectors on your hard disk
---
---
Maximum
Capacity:
The maximum capacity of your hard disk
CHS Format
Cylinders/Heads/Sectors
■
Cylinders:
A number between
0 and 65,535
–—
This item is active only when Hard Disk is selected as the type. This
field is changed by incrementing (pressing the [Spacebar]) or by typ-
ing in the number.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
M a i n M e n u
Menu Field
Options
Default
Description
■
Heads:
A number between
1 and 16
–—
This item is active only when Hard Disk is selected as type. You can
change the value by incrementing (pressing the [Spacebar]) or by
typing in the number.
■
■
Sectors:
A number between
0 and 63
–—
This item is active only when Hard Disk is selected as type. You can
change the value by incrementing (pressing the [Spacebar]) or by
typing in the number.
Maximum
Capacity:
Display only
–—
Displays the maximum capacity of the drive calculated from the
parameters of the hard disk when Auto is selected and the type
is identified as hard disk.
■
■
■
■
■
Multi-Sector
Transfers:
Disabled
2 Sectors
4 Sectors
8 Sectors
16 Sectors
[16 Sectors]
This option cannot be changed when Auto is selected. Specify the
number of sectors per block for multiple sector transfer.
■
■
LBA Mode Control:
Transfer Mode:
Disabled
Enabled
[Enabled]
Enables or disables logical Block Addressing in place of Cylinder,
Head, Sector addressing. This option cannot be changed when Auto
is selected.
■
■
■
■
■
■
■
Standard
Fast PIO 1
Fast PIO 2
Fast PIO 3
Fast PIO 4
Multiword DMA 1
Multiword DMA 2
[Multiword
DMA 2]
Selects the method for moving data to/from the drive. Autotype the
drive to select the optimum transfer mode. This option cannot be
changed when Auto is selected.
■
■
■
■
■
■
■
Ultra DMA Mode:
Disabled
Mode 0
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
[Disabled]
Selects the method for moving data to/from the drive. Autotype the
drive to select the optimum transfer mode. This option cannot be
changed when Auto is selected.
C A U T I O N
■
A bootable CD-ROM may have either a floppy disk or hard drive format. When the bootable CD-ROM is used, the
drive allocations change automatically without changing the BIOS setup. If a floppy disk format CD-ROM is used, the
CD-ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive format) if the internal hard drive is not
present or is disabled. The bootable CD-ROM can never use a C: designation if a formatted internal hard drive is
present since the C: designator is always reserved for the internal hard drive.The boot sequence ignores the new drive
designations, however, your application software will use the new designations.
■
Be careful of the operating environment when booting from a CD-ROM or you may overwrite files by mistake.
Exiting from Main Menu
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to
another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit
menu or to move to another menu.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
T
S e r i e s T a b l e t P C
ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS
The Advanced Menu allows you to:
Follow the instructions for Navigating Through the
Setup Utility to make any changes.
■
Set the I/O addresses for the infrared ports.
Set the features of the keyboard/mouse.
Select between the display panel and/or an external
■
(See Navigating Through the Setup Utility on page 2 for
more information)
■
CRT display.
Set internal device configurations
Configure USB features.
Configure miscellaneous features such as Wake Up On
■
The following tables show the names of the menu fields
for the Advanced Menu and its submenus, all of the
options for each field, the default settings and a descrip-
tion of the field’s function, and any special information
needed to help understand the field’s use.
■
■
LAN.
■
Configure DMI Event Logging.
PhoenixBIOS Setup Utility
Security Boot Info
Main
Advanced
Exit
Item Specific Help
IrDA Port Configurations
Keyboard/Mouse Features
Video Features
Configures IrDA ports.
Internal Device Configurations
CPU Features
USB Features
Miscellaneous Configurations
Event Logging
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select
F9 Setup Defaults
F10 Save and Exit
Sub-Menu
Figure 3. Advanced Menu
8
Download from Www.Somanuals.com. All Manuals Search And Download.
M a i n M e n u
Table 3: Fields, Options and Defaults for the Advanced Menu
Menu Field
Description
IrDA Port Configurations
When selected, opens the IrDA Port Configurations submenu which allows the user to modify settings for
infrared ports.
Keyboard/Mouse
Features
When selected, opens the Keyboard/Mouse Features submenu, which allows setting external and internal
keyboard and mouse parameters.
Video Features
When selected, opens the Video Features submenu, which allows setting of the display parameters,
including routing of video signals to different displays.
Internal Device
Configurations
When selected, opens the Internal Device Configuration submenu, which allows enabling or disabling the
IDE LAN, and modem controllers.
CPU Features
USB Features
When selected, opens the CPU Features submenu, which allows the user to modify the Intel(R) Speed-
Step(R) features.
Configures USB features.
Miscellaneous
Configurations
Configures miscellaneous features, such as Wake Up On LAN and Power Button.
Event Logging
When selected, opens the event logging submenu.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
T
S e r i e s T a b l e t P C
IrDA Port Configuration Submenu of the Advanced Menu
The IrDA Port Configuration submenu provides the
ability to set the I/O addresses and interrupt levels for
C A U T I O N
the infrared ports of your tablet.
I/O addresses, DMA channels, and Interrupt levels can
be entered in various ways, including via the BIOS setup
utility, the control software for the I/O device, or the
hardware. If any two ports or devices have the same
I/O address assigned your tablet will not function
normally. Please keep a record of original settings
before making any changes in the event that a
restoration is required. See your hardware and software
documentation as well as the setup utility to determine
settings, limitations, etc.
P O I N T S
■
To prevent IRQ and address conflicts, avoid changing
the default settings. If you must change the settings,
you can call 1-800-8Fujitsu for technical assistance.
■
The BIOS will warn you of resource conflicts by
placing a yellow asterisk next to each device that is in
conflict.
■
All I/O addresses in Table 5 are in hexadecimal.
PhoenixBIOS Setup Utility
Advanced
Item Specific Help
IrDA Port Configurations
Infrared Port:
[Enabled]
[Disabled]
Mode:
[FIR]
The port is disabled.
I/O Address:
Interrupt:
I/O Address:
DMA Channel:
[2E8-2EF]
[IRQ 3]
[400-43F]
[DMA 3]
[Enabled]
The port is enabled
with user configuration.
[Auto]
Plug & Play OS
configure the port.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 4. IrDA Port Configuration Submenu
10
Download from Www.Somanuals.com. All Manuals Search And Download.
A d v a n c e d M e n u
Table 4: Fields, Options and Defaults for IrDA Port Configuration Submenu of Advanced Menu
Menu Field
Options
Default
Description
■
Infrared Port:
Disabled
Enabled
Auto
[Enabled]
Configures the infrared port using either no configuration (Disabled), a
user defined configuration (Enabled), or by allowing the BIOS or OS to
choose the configuration (Auto).
■
■
■
■
Mode:
IrDA
FIR
[FIR]
Select whether to use normal infrared or fast infrared mode.
■
■
■
■
I/O Address:
3F8 - 3FF
2F8 - 2FF
3E8 - 3EF
2E8 - 2EF
[2E8 - 2EF]
Allows user to set the infrared port base I/O address when infrared port is
Enabled.
■
■
■
Interrupt:
IRQ 3
IRQ 10
IRQ 11
[IRQ 3]
Allows user to set the infrared port interrupt when infrared port is Enabled.
Allows user to set the infrared port I/O address when FIR is Enabled.
■
■
■
■
I/O Address:
400 - 43F
480 - 4BF
500 - 53F
580 - 5BF
[400 - 43F]
■
■
DMA Channel:
DMA 1
DMA 3
[DMA 3]
Allows user to set the infrared port DMA Channel when the infrared port
is Enabled.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
T
S e r i e s T a b l e t P C
Keyboard/Mouse Features Submenu of the Advanced Menu
The Keyboard/Mouse Features submenu is for setting the parameters of NumLock.
PhoenixBIOS Setup Utility
Advanced
Security
Power Savings
Exit
Keyboard/Mouse Features
[Off]
Item Specific Help
Numlock:
Selects power-on state
for Numlock.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 5. Keyboard/Mouse Features Submenu
Table 5: Fields, Options and Defaults for the Keyboard/Mouse Submenu of the Advanced Menu
Menu Field
Options
Default
Description
■
Numlock:
On
Off
[Off]
Sets the NumLock function state when the computer completes
booting.
■
■
On/Padlock Off
12
Download from Www.Somanuals.com. All Manuals Search And Download.
A d v a n c e d M e n u
Video Features Submenu of the Advanced Menu
The Video Features Submenu is for setting the display parameters.
PhoenixBIOS Setup Utility
Security Power Savings Exit
Main
Advanced
Video Features
Item Specific Help
Display:
[Auto]
Select display terminal.
Compensation: [Disabled]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select
F9 Setup Defaults
F10 Save and Exit
Sub-Menu
Figure 6. Video Features Submenu
Table 6: Fields, Options and Defaults for the Video Features Submenu of the Advanced Menu
Menu Field
Options
Default
Description
■
Display:
Internal Flat Panel
External
Auto
[Auto]
Selects where the video signal will be routed.
■
■
■
■
Compensation:
Disabled
Enabled
[Disabled]
Enables or disables display compensation. Display com-
pensation is used to match the native resolution of the
display with the input. For example, if you are using an
application whose resolution causes it to appear smaller
than the screen, enabling Compensation will expand the
image to fill the screen.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
T
S e r i e s T a b l e t P C
Internal Device Configurations Submenu of the Advanced Menu
The Internal Device Configuration submenu allows the user to configure other internal devices.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Item Specific Help
Internal Device Configurations
[Disabled]
IDE port is disabled.
IDE Contoller:
Modem Controller:
LAN Controller:
[Enabled
[Enabled]
[Auto]
[Enabled]
IDE port is enabled.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select
F9 Setup Defaults
F10 Save and Exit
Sub-Menu
Figure 7. Internal Device Configuration Submenu
Table 7: Fields, Options and Defaults for the Internal Device Configuration Submenu of the Advanced Menu
Menu Field
Options
Default
Description
■
IDE Controller:
Disabled
Enabled
[Enabled]
Enables or disables selected IDE devices.
■
■
Modem Controller:
LAN Controller:
Disabled
Enabled
[Enabled]
[Auto]
Enables or disables the modem device.
■
■
Disabled
Enabled
Auto
Enables or disables the LAN controller.When Auto is selected, the
LAN will be disabled when the system is running on battery power
and the LAN cable is not connected.
Note: If Auto is selected, you will need to attach your Ethernet
cable prior to booting up the system.
■
■
14
Download from Www.Somanuals.com. All Manuals Search And Download.
A d v a n c e d M e n u
CPU Features Submenu of the Advanced Menu
The CPU Features Submenu allows the user to modify the Intel(R) SpeedStep(R) Technology features.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Item Specific Help
CPU Features
Select Enhanced
Intel(R) SpeedStep(R)
Technology enabled or
disabled.
SpeedStep(R) Technology:
On Battery:
On AC:
[Enabled]
[Battery Optimized]
[Maximum Performance]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter Select
Sub-Menu
Figure 8. CPU Features Submenu
Table 8: Fields, Options and Defaults for the CPU Features Submenu of the Advanced Menu
Menu Field
Options
Default
Description
■
SpeedStep(R)
Technology:
Disabled
Enabled
[Enabled]
Enables or disables SpeedStep(R) Technology which allows the user
to determine the CPU performance when the tablet is running on
AC or battery. This technology decreases power consumption by
decreasing CPU speeds.
■
■
On Battery:
On AC:
Maximum
[Battery Optimized]
Allows the user to select the CPU performance when the system is
running on battery power.
Performance
■
Battery
Optimized
Automatic
■
■
Maximum
Performance
Battery
Optimized
[Maximum
Performance]
Allows the user to select the CPU performance when the system is
running on AC power.
■
■
Automatic
15
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
T
S e r i e s T a b l e t P C
USB Features Submenu of the Advanced Menu
The USB Features Submenu configures the USB features for your system.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
USB Features
Item Specific Help
[Enabled]
Legacy USB Support:
[Disabled]
SCSI SubClass Support:
[Disabled]
The feature is disabled.
[Enabled]
Legacy Floppy Emulation
is enabled and USB
floppy is available
without USB aware OS.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter Select
Sub-Menu
Figure 9. USB Features Submenu
Table 9: Fields, Options and Defaults for the ACPI Features Submenu of the Advanced Menu
Menu Field
Options
Default
Description
■
Legacy USB
Support:
Disabled
Enabled
[Enabled]
When Disabled is selected, legacy USB emulation is disabled. When
Enabled is selected, legacy USB emulation is enabled and USB
devices are available without USB-aware OS.
■
■
SCSI SubClass
Support:
Disabled
Enabled
[Disabled]
When Enabled is selected, USB devices that belong to the SCSI sub-
class in the mass storage class (e.g., USB Memory Key) are enabled.
■
16
Download from Www.Somanuals.com. All Manuals Search And Download.
A d v a n c e d M e n u
Miscellaneous Configurations Submenu of the Advanced Menu
The Miscellaneous Configurations Submenu configures miscellaneous features for your system.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Item Specific Help
Miscellaneous Configurations
Power Button:
[Disabled]
[Disabled]
[Off]
Configures the power
button.
Wake up on LAN:
Auto Save To Disk:
Volume Setting:
[Middle]
*ACPI OS ignores this
setting.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter Select
Sub-Menu
Figure 10. Miscellaneous Configurations Submenu
Table 10: Fields, Options and Defaults for the Miscellaneous Configurations Submenu
Menu Field
Options
Default
Description
■
Power Button:
Disabled
Power Off
[DIsabled]
When Disabled is selected, the power button does not respond to a
press. When Power Off is selected, the button turns the power off.
■
■
Wake up on LAN:
Auto Save To Disk:
Disabled
Enabled
[Disabled]
[Off]
When Enabled is selected, the system will wake up when the internal
LAN device receives a Magic Packet while the system is powered off.
■
■
Off
On
Turns the Auto Save To Disk feature on and off. When turned on,
when low battery state is reached, the system in suspend state will
save its state to disk and power off.
■
■
Volume Setting:
Off
Minimum
Middle
Maximum
[Middle]
Allows you to set or disable the system volume level.
■
■
■
17
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
T
S e r i e s T a b l e t P C
Event Logging Submenu of the Advanced Menu
The Event Logging Submenu configures event logging features for DMI events.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Event Logging
Item Specific Help
Event Log Capacity:
Event Log Validity:
Space Available
Valid
Press <Enter> key to
view the contents of
the event log.
View Event Log:
[Enter]
Event Logging:
[Enabled]
System Boot Event:
[Disabled]
Clear All Event Logs:
Mark Events as Read:
[No]
[Enter]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select
F9 Setup Defaults
F10 Save and Exit
Sub-Menu
Figure 11. Event Logging Submenu
Table 11: Fields, Options and Defaults for the Event Logging Submenu of the Advanced Menu
Menu Field
Options
Default
Description
Event Log
Capacity:
Space Available
Display only.
Event Log Validity:
View Event Log:
Event Logging:
Valid
Display only.
■
Enter
[Enter]
[Enabled]
Allows you to view content of event log.
Turns event logging on and off for all DMI events.
■
Disabled
Enabled
■
■
System Boot
Event:
Disabled
Enabled
[Disabled]
[No]
Turns event logging on and off for DMI system boot events.
When set to [Yes] all event logs will be cleared at next boot.
Allows you to make all events currently in the event log as read.
■
■
Clear All Event
Logs:
No
Yes
■
■
Mark Events as
Read:
Enter
[Enter]
18
Download from Www.Somanuals.com. All Manuals Search And Download.
S e c u r i t y M e n u
The Security menu allows you to set up the data security
features of your tablet to fit your operating needs and to
view the current data security configuration. Follow the
instructions for Navigating Through the Setup Utility to
make any changes. (See Navigating Through the Setup
Utility on page 2 for more information)
P O I N T
■
If you set a password, write it down and keep it in a
safe place. If you forget the password you will have to
contact your support representative to regain access
to your secured functions and data.
■
If you make an error when re-entering the password
a [Warning] will be displayed on the screen. To try
again press the [Enter] key and then retype the pass-
word. Press the [Esc] key to abort the password set-
ting process.
The following tables show the names of the menu fields
for the Security menu and its submenus, the options for
each field, the default settings and a description of the
field's function and any special information needed to
help understand the field's use. The default condition is
no passwords required and no write protection.
■
If the Password on Boot is Disabled you will not have
to type your password upon resuming the system
from the Suspend or Save-to-Disk modes.
C A U T I O N
Entering a password incorrectly three times in a row will
cause the keyboard and mouse to be locked out and the
warning [System Disabled]to be displayed. If this
happens, restart the computer by turning off and on the
power with the power switch and use the correct
password on reboot. Note: Unless you have previously
enabled the power switch in the BIOS, it will not be
possible to turn off the unit with the switch.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Boot
Info
Exit
Item Specific Help
Supervisor Password Is:
User Password Is:
Clear
Clear
Press <Enter> key to
set Supervisor Password
to enable any password
features.
Set Supervisor Password
Set User Password
Minimum User Password Length: [0]
[Enter]
[Enter]
Then password entry is
required to enter BIOS
Setup.
Password on Boot:
On Automatic Wake up:
Boot from Removable Media:
[Disabled]
[Disabled]
[All]
Hard Disk Security
Owner Information
Security Panel On Resume:
[Enabled]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
19
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
T
S e r i e s T a b l e t P C
Figure 12. Security Menu
Table 12: Fields, Options and Defaults for the Security Menu
Menu Field
Options
Default
Description
Supervisor
Password is:
–—
Clear
A display-only field. Set is displayed when the system Supervisor
Password is set and Clear when it is not.
User Password is:
–—
Clear
A display-only field. Set is displayed when the general User Password is
set, and Clear when it is not.
Set Supervisor
Password
[Enter]
[Enter]
Sets, changes or cancels Supervisor Password. The Supervisor Password
may be up to eight characters long and include only letters or numbers
(no symbols). Passwords are NOT case- sensitive. To cancel a password
press the Enter key instead of entering characters in the Enter New Pass-
word field and in the Re-enter New Password field. When a Supervisor
Password is set it must be used to access the BIOS setup utility.
Set User Password
[Enter]
[Enter]
This field can only be accessed if the Supervisor Password is set. Sets,
changes or cancels the User Password. The User Password may be up to
eight characters long and must include only letters or numbers (no
symbols). Passwords are NOT case-sensitive. To cancel a password press
the Enter key instead of entering characters in the Enter New Password
field and in the Re-enter New Password field. When a User Password is
set it must be used to access the BIOS setup utility.
Minimum User
[0]
[0]
Sets the minimum length for User Password.
Password Length:
■
Password on Boot:
Disabled
First Boot
Every Boot
[Disabled]
When Enabled, a password (User or Supervisor) is required after the
Power On Self Test (POST) before the operating system will be read from
a disk. When set to Disabled no password is required. If no Supervisor
Password is set this feature is not available and no password is required.
■
■
■
■
On Automatic
Wake up:
Disabled
Enabled
[Disabled]
[All]
This field is active only when Password On Boot is set to First Boot or
Every Boot. When disabled, password entry is not required on automatic
wake up on LAN or Real Time Clock. When enabled, the password is still
required on automatic wake up.
■
■
Boot from
Removable Media:
All
Enable password allows supervisor access only.
Supervisor only
Hard Disk Security:
–—
–—
–—
–—
Configures hard disk security features.
Sets Owner information.
Owner
Information:
■
Security Panel On
Resume
Disabled
Enabled
[Enabled]
Allows the Security Panel Feature to be enabled or disabled upon
Suspend from Resume.
■
20
Download from Www.Somanuals.com. All Manuals Search And Download.
S e c u r i t y M e n u
Hard Disk Security Submenu of the Security Menu
The Hard Disk Security Submenu is for configuring hard disk security features.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Hard Disk Security
Item Specific Help
Primary Master Password Is:
Set Primary Master Password:
Clear
Enter
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter
Select
Sub-Menu
Figure 13. Hard Disk Security Submenu
Table 13: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Menu Field
Default
Description
Primary Master
Password Is:
---
A display-only field. Set is displayed when the Master Password is set and Clear when it is
not.
Set Primary
Master Password
[Enter]
Sets, changes or cancels Primary Master Password. The Primary Master Password may be up
to seven characters long and include only letters or numbers (no symbols). Passwords are
NOT case- sensitive. To cancel a password press the Enter key instead of entering characters
in the Enter New Password field and in the Re-enter New Password field. When a Primary
Master Password is set it must be used to access the hard disk. Data on the hard disk cannot
be read on other systems.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
T
S e r i e s T a b l e t P C
Owner Information Submenu of the Security Menu
The Owner Information Submenu is for setting owner information. Note that Owner Information cannot be set
without having entered a supervisor’s password.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Owner Information
Item Specific Help
Owner Information Is:
Set Owner Information
Clear
Press <Enter> key to
set owner information.
Up to 80 characters can
be set. Available
characters are ASCII
codes from 32 through
126.
[Enter]
Foreground Color:
Background Color:
[Gray]
[Black]
The owner information
is always displayed at
the bottom line of the
screen during POST.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 14. Owner Information Submenu
Table 14: Fields, Options and Defaults for the Owner Information Submenu of the Security Menu
Menu Field
Options
Default
Description
Owner
–—
Clear
Display only.
Information Is:
Set Owner
Information:
–—
[Enter]
[Gray]
Field to write owner infor-
mation (e.g., your name).
■
■
■
■
■
■
■
■
■
■
■
■
■
Foreground
Color:
Black
Blue
Green
Red
Gray
Light Red
Light Magenta
Yellow
Set foreground color.
■
Magenta
Brown
White
Light Blue
Light Green
Light Cyan
■
■
Cyan
Bright White
■
■
■
■
■
■
■
■
■
■
■
■
■
Background
Color:
Black
Blue
Green
Cyan
Red
Gray
Light Red
Light Magenta
Yellow
[Black]
Sets background color.
■
Magenta
Brown
White
Light Blue
Light Green
Light Cyan
■
■
Bright White
Exiting from the Security Menu
When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to
another menu. If you wish to exit from setup utility, press the [Esc] key to go to the Exit Menu. If you wish to move to
another menu, use the cursor keys.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
S e c u r i t y M e n u
BOOT MENU – SELECTING THE OPERATING SYSTEM SOURCE
The Boot Menu is used to select the order in which the
BIOS searches sources for the operating system. Follow
the instructions for Navigating Through the Setup
Utility to make any changes. (See Navigating Through the
Setup Utility on page 2 for more information)
The following tables show the names of the menu fields
for the Boot menu and its submenu, all of the options
for each field, the default settings and a description of
the field's function and any special information needed
to help understand the field's use.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Boot
Info
Exit
Item Specific Help
Quick Boot:
[Enabled]
Boot Time Diagnostic Screen:
[Disabled]
[Disabled]
All diagnostic tests
will be done.
Preboot Execution Environment:
Boot Device Priority
[Disabled]
[Enabled]
Some diagnostic tests
may be skipped while
booting to speed up.
F1 Help
ESC Exit
Select Item -/Space Change Values
Select Menu Enter
Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 15. Boot Menu
Table 15: Fields, Options and Defaults for the Boot Menu
Menu Field
Options
Default
Description
■
Quick Boot:
Disabled
Enabled
[Enabled]
Turns on and off booting with a truncated set of Power On Self
Tests. (Fewer tests mean faster turn on.)
■
■
Boot Time
Diagnostic Screen:
Disabled
Enabled
[Disabled]
[Disabled]
__
Turns on and off display of test results instead of Fujitsu logo screen
during Power On Self Test.
■
■
Preboot Execution
Environment:
Disabled
Enabled
Turns on and off boot from network server options.
■
Boot Device
Priority:
Selects the Boot
Device Priority
submenu
This menu allows setting up the source for the operating system.
See “Boot Device Priority Submenu” in the following section. Press-
ing the [F12] key will also let you choose the boot device.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
T
S e r i e s T a b l e t P C
The Boot Device Priority Submenu of the Boot Menu
The Boot Device Priority Submenu is for setting the
order of checking of sources for the operating system.
C A U T I O N
Be aware of the operating environment when booting
from a CD-ROM or you may overwrite files by mistake.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Boot
Boot Device Priority
Item Specific Help
+Floppy Disk Drive
+Hard Disk Drive
CD-ROM Drive
Keys used to view or
configure devices:
<Enter> expands or
collapses devices with
a + or -.
<Ctrl+Enter> expands
all.
<Shift+1> enables or
disables a device.
<+>/<Space> or <->
moves the device up or
down.
<d> removes a device
that is not installed.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter
Select
Sub-Menu
Figure 16. Boot Device Priority Submenu
Table 16: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu
Menu Field
Description
+Floppy Disk Drive
+Hard Disk Drive
CD-ROM Drive
The boot selections determine the order in which the BIOS searches for the operating system during a startup
sequence. To change the order highlight one source by using the [up] or [down] cursor keys and then press the
[+] or [-] key to change the order number for that source. Be sure to save your changed order when you exit the
BIOS setup utility.
Exiting from Boot Menu
When you have finished setting the boot parameters with the Boot menu, you can either exit from the setup utility or
move to another menu. If you wish to exit from the setup utility press the [Esc] key to go to the Exit menu. If you wish
to move to another menu, use the cursor keys.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
B o o t M e n u
INFO MENU – DISPLAYS BASIC SYSTEM INFORMATION
The Info menu is a display only screens that provides the
configuration information for your tablet.
P O I N T
The information, including CPU type and speed, and
total memory, displayed on this screen varies according
to the unit you purchased.
The following table shows the names of the menu fields
for the Info menu and the information displayed in
those fields. These fields are for information purposes
only, and are not editable.
PhoenixBIOS Setup Utility
Security Boot Info
Main
Advanced
Exit
Item Specific Help
BIOS Version:
BIOS Date:
BIOS Area:
1.01
07/21/2003
E000h - FFFFh
CPU Type:
CPU Speed:
L1 Cache:
L2 Cache:
Intel(R) Pentium(R) M
1.40 GHz
64 KB
1024 KB
Total Memory:
512 MB
Memory Slot 1: 512 MB DDR SDRAM
Memory Slot 2: None
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9
Setup Defaults
F10 Save and Exit
Figure 17. Info Menu
Table 17: Fields, Options and Defaults for the Info Menu
Note that the parameters listed in the following table may be different, depending upon your system configuration.
Menu Field
BIOS Version:
Default
Menu Field
L1 Cache:
Default
1.01
64 KB
BIOS Date:
BIOS Area:
CPU Type:
CPU Speed:
07/21/2003
L2 Cache:
1024 KB
512 MB
E000h – FFFFh
Intel(R) Pentium(R) M
1.40 GHz
Total Memory:
Memory Slot 1:
Memory Slot 2:
512 MB DDR SDRAM
None
25
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
T
S e r i e s T a b l e t P C
EXIT MENU – LEAVING THE SETUP UTILITY
The Exit Menu is used to leave the setup utility. Follow the instructions for Navigating Through the Setup Utility to
make any changes. (See Navigating Through the Setup Utility on page 2 for more information). The following table
shows the names of the menu fields for the Exit menu, the default settings and a description of the field's function and
any special information needed to help understand the field's use.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Boot
Exit
Item Specific Help
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Exit System Setup and
save your changes to
CMOS.
Save Changes
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9
Setup Defaults
F10 Save and Exit
Figure 18. Exit Menu
Table 18: Fields, Options and Defaults for the Exit Menu
Menu Field
Description
Exit Saving
Changes
Exit Saving Changes and Exit will store all the entries on every menu of the setup utility to the BIOS memory and
then exit the setup utility. A confirmation message Save Configuration changes and exit now? [Yes]
[No] will be displayed.
Exit Discarding
Changes
Selecting Exit Discarding Changes and Exit will exit the setup utility with out writing to the BIOS memory. When the
BIOS recognizes this selection it will load the operating system and begin operation.
Load Setup
Defaults
Selecting Load Setup Defaults will load the factory preset default values for all menu fields, then display the message
Load default configuration now? [Yes] [No]. When confirmed the setup utility will return to the Exit
Menu. To return to another menu follow the directions in the Navigating Through the Setup Utility Section.
Discard Changes
Save Changes
Selecting Discard Changes will load the previous values in BIOS memory for all menu fields. The message Load
previous now? [Yes] [No] will be displayed. When confirmed the utility will return to the Exit menu. To
return to another menu, follow the directions in the Navigating Through the Setup Utility Section.
Selecting Save Changes causes the new settings in all menus to be written to the BIOS memory. The message Save
configuration changes now? [Yes] [No] will be displayed. When confirmed, the setup utility will return
to the Exit menu. To go to another menu, follow the directions in the Navigating Through the Setup Utility section.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
|