Fisher Price Lawn Mower X6020 User Manual

X6020  
Product features and decorations may vary from the photograph.  
Please keep this instruction sheet for future reference, as it contains important information.  
Adult assembly is required. Tools required for assembly:  
Phillips Screwdriver, Hammer and Scrap Block of Wood (not included).  
Requires three "AA" batteries (included).  
Batteries included are for demonstration purposes only.  
Age: 2-6 years.  
Weight limit: 60 lbs (27 kg).  
IMPORTANT! It is good practice to start training children very young regarding the importance of helmet use.  
When children are older and riding bicycles and faster vehicles, it is important that they use a helmet each and every time they  
ride. For this reason, even while riding a tricycle, it is a good idea to familiarize your child with helmet use, so that it becomes  
a habit for life. Choose a helmet that complies with requirements of the applicable certifying agency for bicycle helmets.  
fisher-price.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
CAUTION  
Hubcap  
(Peg Side Down)  
Cap Nut  
This package contains small parts.  
For adult assembly only.  
Rear Wheel  
(Indented Side Up)  
Cover  
Straight Axle  
Frame  
Hubcap  
Cap Nut  
Assembly Tool  
Assembled  
Rear Wheel  
Rear Wheel  
(Indented Side Down)  
Scrap Block  
of Wood  
3
Hubcap  
(Peg Side Up)  
Turn the frame on its side with the exposed end of the  
straight axle up.  
• Place the cap nut assembly tool under the assembled rear  
wheel and onto the cap nut.  
Straight Axle  
1
• Slide a rear wheel (indented side up) onto the end of the  
straight axle.  
• Slide a hubcap (peg side down) onto the straight axle.  
• Slide a hubcap (peg side up) onto the straight axle.  
• Place a cap nut on the end of the straight axle. Tap the  
cap nut with a hammer. Gently pull the rear wheel up  
to be sure the cap nut is securely attached to the  
straight axle.  
• Slide a rear wheel (indented side down) onto the  
straight axle.  
Frame  
• Insert one of the tabs on a cover into a slot in the hubcap.  
Push to snap the cover into place. Repeat this procedure to  
attach the other cover to the other hubcap.  
Pedal Hub  
Pedal Axle  
Hole  
Hole  
Tabs  
Slot  
Pedal Hub  
4
Straight Axle  
2
BOTTOM VIEW  
• Fit two pedal hubs onto the pedal axle tabs. Make sure the  
tabs fit into the slot in each pedal hub.  
Turn the frame upside down.  
• Insert the straight axle through the holes in the rear of  
the frame.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
Pedal Hubs  
Pedal Axle  
Assembly  
Front Wheel  
Pedal  
Pedal Axle  
5
• While holding the pedal hubs on the pedal axle assembly,  
insert the pedal axle through the hole in the center of the  
front wheel.  
• Push the pedal hubs into the center of the front wheel until  
they are flush with the surface of the front wheel.  
Scrap Block  
of Wood  
7
• Fit the pedal on the pedal axle. Tap the pedal with  
a hammer until it is secure.  
Pedal Hub  
• Pull the pedal up to be sure it is secure. If you can remove  
it, you have not secured it properly. Tap it with the  
hammer again.  
Fork Arms  
Fork Cover  
Pedal Hub  
Groove  
6
Turn the front wheel assembly over.  
• Insert the remaining pedal hubs on top of and below the  
pedal axle and into the hole in the center of the front wheel.  
• Push the pedal hubs into the center of the front wheel until  
they are flush with the surface of the front wheel.  
Pedal Axle  
8
• Place the front wheel assembly between the fork arms.  
Make sure the pedal axle fits into the groove at the bottom  
of each fork arm.  
• Place a fork cover over the pedal axle on one fork arm.  
• Insert two #8 x 3/4" (1,9 cm) screws into the fork cover  
and tighten.  
• Repeat this procedure to attach the other fork cover to the  
other fork arm.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
Headlight  
Cover  
Handlebar  
Frame  
Neck  
Fork  
Post  
Fork Cover  
11  
• Fit the the headlight cover onto the front of the handlebar.  
• Insert three #6 x 1/2" (1,3 cm) screws into the headlight  
cover. Tighten the screws.  
Rear of Trike  
9
Seat Retainer  
• Insert the fork post up through the hole in the neck of the  
frame. Make sure the fork is positioned so that the fork  
covers face the rear wheels.  
Seat  
• Place the handlebar onto the fork post and push it down  
onto the frame. Make sure the handlebar is positioned so  
that the screw hole faces the rear wheels and aligns with  
the screw hole in the fork post.  
Peg  
Hint: You may need to rotate the handlebar to align the holes.  
• Insert the #8 x 3" (7,6 cm) screw through the hole in the  
handlebar and into the fork post so that part of the screw  
(about 3/4" - 1,9 cm) is still visible. Tighten the screw.  
12  
• Position the seat upside down.  
• Fit the small pegs on the seat retainer into the holes in  
the seat.  
Cap  
10  
• Insert and “snap” the cap into the hole in the frame.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Label Decoration  
Attaching the Seat  
Hint: The seat can be attached to the frame in any of three  
positions, depending on the size of your child. Check your  
child’s t on the trike by observing the seat to pedal distance,  
as it is being ridden. If the pedals seem too far away or too  
close for your child, move the seat up or down.  
12  
14  
13  
10  
(Label 8  
opposite side)  
Tabs  
3
7
2
17  
Seat  
Retainer  
(Label 18  
opposite side)  
TM  
16  
11  
1
(Label 15  
Slots  
(Label 11  
opposite side)  
opposite side)  
4
1
(Label 5  
opposite side)  
(Label 1's  
both sides)  
SIDE VIEW  
Middle Position  
Lower Position  
Upper Position  
• At an angle, insert the tabs on the seat into any of the top  
three sets of slots for the lower, middle or upper position.  
• Lower the seat so that the seat retainer inserts and snaps  
into the slots in the frame.  
• Pull up on the seat to be sure it is secure.  
9
6
DASH VIEW  
• Make sure the areas where the labels will be applied are  
clean and dry. Wipe your vehicle with a clean, soft, dry  
cloth to remove any dust or oils.  
• For best results, avoid applying a label more than once.  
• Apply the labels as shown in the illustration above.  
• After applying the label, rub the label firmly with a cloth to  
make sure the label is adhered to your vehicle.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Battery Replacement  
Battery Safety Information  
Note: For best performance, we recommend replacing the  
batteries that came with this trike with three, new "AA" (LR6)  
alkaline batteries.  
In exceptional circumstances, batteries may leak fluids that can  
cause a chemical burn injury or ruin your product. To avoid  
battery leakage:  
• Do not mix old and new batteries or batteries of different  
types: alkaline, standard (carbon-zinc) or rechargeable  
(nickel-cadmium).  
Headlight Cover  
• Insert batteries as indicated inside the battery compartment.  
• Remove batteries during long periods of non-use. Always  
remove exhausted batteries from the product. Dispose of  
batteries safely. Do not dispose of this product in a fire.  
The batteries inside may explode or leak.  
• Never short-circuit the battery terminals.  
• Use only batteries of the same or equivalent type,  
as recommended.  
• Do not charge non-rechargeable batteries.  
• Remove rechargeable batteries from the product  
before charging.  
• If removable, rechargeable batteries are used, they are  
only to be charged under adult supervision.  
FCC Statement  
1
(United States Only)  
This equipment has been tested and found to comply with  
the limits for a Class B digital device, pursuant to Part 15  
of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses and  
can radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause harmful  
interference to radio communications. However, there is  
no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference  
to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to  
try to correct the interference by one or more of the  
following measures:  
• Loosen and remove the screws from the headlight cover.  
Remove the headlight cover.  
1,5V x 3  
AA(LR6)  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment  
and receiver.  
• Consult the dealer or an experienced radio/TV technician  
for help.  
Note: Changes or modifications not expressly approved by  
the manufacturer responsible for compliance could void the  
user’s authority to operate the equipment.  
This device complies with Part 15 of the FCC Rules.  
Operation is subject to the following two conditions: (1)  
this device may not cause harmful interference and (2) this  
device must accept any interference received, including  
interference that may cause undesired operation.  
2
• Loosen the screw in the battery compartment door. Open  
the battery compartment door.  
• Insert three "AA" (LR6) alkaline batteries.  
• Close the battery compartment door and tighten the screw.  
• Replace the headlight cover. Replace the screws  
and tighten.  
• When sound or lights become faint or stop, it's time for an  
adult to replace the batteries. We recommend the use of  
alkaline batteries for longer battery life.  
• If this product begins to operate erratically, you may need  
to reset the electronics. Slide the power switch off and then  
back on.  
• Protect the environment by not disposing of this  
product with household waste (2002/96/EC). Check  
your local authority for recycling advice and facilities.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Removing the Seat  
Consumer Information  
Seat  
CONSUMER ASSIS
TA
NCE  
1-800-432-5437 (US & Canada)  
1300 135 312 (Australia)  
Seat Retainer Tab  
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.  
Hearing-impaired consumers: 1-800-382-7470.  
Outside the United States:  
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,  
Great Britain: Mattel UK Ltd, Vanwall Business Park,  
Maidenhead SL6 4UB. Helpline: 01628 500303.  
Mattel Europa B.V., Gondel 1, 1186MJ Amstelveen, Nederland.  
Seat Retainer Tab  
Australia: Mattel Australia Pty. Ltd., 658 Church Street,  
Locked Bag #870, Richmond, Victoria 3121 Australia.  
New Zealand: 16-18 William Pickering Drive,  
Albany 1331, Auckland.  
Turn the frame on its side.  
• Squeeze the seat retainer tabs toward one another and lift  
the seat from the frame.  
Care  
• Check the plastic parts regularly and if broken or cracked,  
dispose of them properly.  
• Check all fasteners regularly to be sure they are tight.  
If the fasteners are not tight, tighten them as necessary.  
Let's Go!  
To clean, use a mild soap and water solution and a clean  
cloth. Rinse clean with water to remove soap residue.  
Horn  
Sounds  
Turn Signal  
Turn Signal  
Sounds  
ICES-003  
• This Class B digital apparatus complies with Canadian  
ICES-003. Operation is subject to the following two  
conditions: (1) this device may not cause harmful  
interference and (2) this device must accept any  
interference received, including interference that may cause  
undesired operation.  
NMB-003  
• Cet appareil numérique de la classe B est conforme à la  
norme NMB-003 du Canada. Lutilisation de ce dispositif est  
autorisée seulement aux conditions suivantes : (1) il ne doit  
pas produire de brouillage et (2) l’utilisateur du dispositif  
doit être prêt à accepter tout brouillage radioélectrique reçu,  
même si ce brouillage est susceptible de compromettre le  
fonctionnement du dispositif.  
Ignition  
Power Switch  
• Slide the power switch ON  
Turn the ignition, “VRROOOM!”  
• Press the left or right turn signals for flashing blinkers.  
.
• Press any of the sound buttons for music, a horn or other  
fun phrases!  
• When you are finished playing with this toy, slide the power  
switch OFF  
.
BARBIE and associated trademarks and trade dress are owned by Mattel, Inc.  
©2012 Mattel. All Rights Reserved. ® and ™ designate U.S.  
trademarks of Mattel, except as noted.  
PRINTED IN MEXICO  
X6020pr-0920  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Eizo Computer Monitor S2031W User Manual
Electro Voice Microphone 625HS User Manual
Electro Voice Speaker Force i Sub User Manual
Exido Toaster 243 031 User Manual
Exmark Lawn Mower LZ27KC604 User Manual
Fostex DVD Recorder DV824 User Manual
FujiFilm Film Camera RVP100 User Manual
GE Clothes Dryer SE1200 User Manual
GE Monogram Refrigerator ZISP480DXSS User Manual
GE Oxygen Equipment JTP28BF CF WF User Manual