Cutout width
28-1/2'' MIN.
28-5/8'' MAX.
5
JTP28BF/CF/WF
Cutout depth
23-1/2" MIN
GE® 30" Built-In Double Oven
Junction box
location
E
Dimensions and Installation Information (in inches)
A
B
KW Rating
Conduit
(48-1/2"
long)
8.8
6.6
240V
208V
47" to
bottom of
junction box
Cutout height
51-13/16" MIN.
51-15/16" MAX.
Breaker Size
D
40 Amps
30 Amps
240V
208V
A
21
Cabinet
30"
11/16"-3/4"
1"
21" minimum
Door Opening
Allowance
A - Overlap of Oven Over Side Edges of Cutout
B - Overlap of Oven at Bottom of Cutout
Oven
B
Minimum cutout location
12" from the floor.
C
Cabinet
width 30"
C - Overall Depth
23-1/2"
52-7/8"
29-3/4"
MOST 30'' WALL CABINETS CAN BE USED WITH THIS UNIT.
THE OPENING BETWEEN THE INSIDE WALLS MUST BE AT LEAST 28-1/2'' WIDE.
D - Overall Height
E - Overall Width
Note: Cabinets installed adjacent to wall ovens must have an adhesion
spec of at least a 194°F temperature rating. Electric wall ovens are not
approved for installation with a plug and receptacle. They must be
hard wired in accordance with installation instructions. Suitable oven
cabinet bracing must support 275 lbs.
C
L
2 x 4 or
equivalent
runners
Installation Information: Before installing, consult installation instructions
packed with product for current dimensional data.
Suitable
bracing
18"
to support
runners
over centerline
of cabinet
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
(Must Support 275 LBS.)
All GE ranges are equipped with
Listed by
Underwriters
Laboratories
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
R
Specification Revised 7/05
320132
Download from Www.Somanuals.com. All Manuals Search And Download.
|