Edelbrock Automobile Parts 8873 User Manual

IN-LINE FUEL FILTER  
Catalog #8873  
®
INSTALLATION INSTRUCTIONS  
PLEASE study these instructions carefully before beginning this installation. Most installations can be accomplished with common tools  
and procedures. However, you should be familiar with and comfortable working on your vehicle. If you do not feel comfortable performing  
this installation, it is recommended to have the installation completed by a qualified mechanic. If you have any questions, please call our  
Technical Hotline at: 1-800-416-8628, 7:00 am - 5:00 pm, Pacific Standard Time, Monday through Friday or e-mail us at  
IMPORTANT NOTE: Proper installation is the responsibility of the installer. Improper installation  
will void your warranty and may result in poor performance and engine or vehicle damage.  
DESCRIPTION: This fuel filter is designed to be used with standard carbureted fuel systems. It can be used in-line with OEM type filters  
sometimes incorporated in stock systems. It is to be used with fuel systems that DO NOT exceed 8 PSI. The filter element should be  
replaced when it becomes dirty (use Edelbrock replacement element #1927). The filter has an anti-drain-back valve and must be  
installed with the drain back valve facing toward the inlet (“IN”) side of the filter assembly (See Figure 1). Filter is compatible with  
alcohol fuel.  
NOTE: The filter has provisions for both 5/16” and 3/8” fuel hose. Make sure the fuel hose has freshly clean cut ends when securing  
the hose to the filter. For maximum safety, use only flat screw type hose clamps (supplied) for this installation. Please note the filter  
has a particular flow direction (See Figure 1).  
CAUTION: Be sure to coat the threads of the filter cap with pipe sealant or anti-seize compound before assembly.  
IMPORTANT: After installation, start engine and check all fuel lines, fittings, and the filter for possible leaks. Correct any leaks before  
operating the vehicle. Tighten the filter cap enough to make contact with the filter body. This will ensure proper seating of the o-  
ring (See Figure 1).  
KIT CONTENTS:  
1  
2  
Fuel Filter Assembly (Filter body, element, spring, o-ring and filter cap)  
Hose Clamps  
Hose Clamp  
Spring  
FUEL FLOW  
Fuel Hose  
Fuel Filter Body  
O-Ring Seal  
Hose Clamp  
Fuel Hose  
FUEL FLOW  
Replacement  
Element #1927  
Filter Cap  
Anti-Drain  
Back Valve  
Figure 1 - Fuel Filter Assembly Diagram  
Edelbrock Corporation • 2700 California St. • Torrance, CA 90503  
Tech-Line: 1-800-416-8628 • E-Mail: [email protected]  
Catalog #8873  
Rev. 6/06 - RS/mc  
©2006 Edelbrock Corporation  
Brochure #63-8873  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Echo Blower PB 610 User Manual
Electro Voice Portable Speaker MC12A User Manual
Electro Voice Portable Speaker SRO 18 User Manual
Euro Pro Sewing Machine 9025 User Manual
Fender Musical Toy Instrument PM 1 Deluxe User Manual
Fisher Price Motorized Toy Car H3427 User Manual
Focal Car Speaker 130 KRC User Manual
Fujitsu Server T5120 User Manual
Garrett Metal Detectors Home Safety Product SEA HUNTER MARK ll User Manual
GE Telephone 29879 User Manual