1000W
REAR MOTOR
LINE TRIMMER
RM1000
INSTRUCTION MANUAL
Code: RM1000
Date: 061221
Black
Cyan
Magenta
Yellow
Edition: 04
Op: DCR
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Description of symbols
Your new GMC power tool will more than satisfy
your expectations. It has been manufactured under
stringent GMC Quality Standards to meet superior
performance criteria.
The rating plate on your tool may show symbols.
These represent important information about the
product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years
of dependable service.
Double insulated for additional protection.
CAUTION. Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings.
Conforms to relevant standards
for electromagnetic compatibility.
Your GMC power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Use at a distance of at least 5m from
other people.
If cordset is damaged remove it from the
plug immediately and have it replaced by an
authorised service centre.
Environmental protection
Do not use in the rain.
Recycle unwanted materials instead
of disposing of them as waste. All tools,
hoses and packaging should be sorted,
taken to the local recycling centre and
disposed of in an environmentally safe way.
Thrown objects and rotating line can
cause severe injury.
Sharp blade.
Warning.
Read these instructions for use carefully.
Specifications
Voltage:
230-240Vac ~ 50Hz
1000W
Input power:
No load speed:
Cut diameter (swathe):
Line thickness:
Spool type:
7500 min-1
380mm
2.0mm
Bump Feed
Yes
Secondary handle:
Tool weight:
4kg
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Personal safety
Safety instructions
• Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the influence of
drugs, alcohol, or medication. A moment of inattention
while operating power tools may result in serious
personal injury.
WARNING. Read and understand all instructions. Failure
to follow all instructions listed below may result in electric
shock, fire and/or serious injury. The term “power tool” in all of
the warnings below refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
Save these instructions
Work area
• Use safety equipment. Always wear eye protection.
Safety equipment such as a dust mask, non-skid
safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
• Keep work area clean and well lit. Cluttered and dark
areas invite accidents.
• Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases, or
dust. Power tools create sparks which may ignite the dust
or fumes.
• Avoid accidental starting. Ensure the switch is in the
off-position before plugging in. Carrying power tools
with your finger on the switch or plugging in power tools
that have the switch on invites accidents.
• Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
• Remove any adjusting key or wrench before turning
the tool on. A wrench or a key that is left attached
to a rotating part of the power tool may result in
personal injury.
Electrical safety
• Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
• Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
• Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is
earthed or grounded.
• Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be caught
in moving parts.
• Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
• If devices are provided for the connection of dust
extraction and collection facilities ensure that these are
connected and properly used. Use of these devices can
reduce dust-related hazards.
• Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
Power tool use and care
• Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the job
better and safer at the rate for which it was designed.
• When operating a power tool outdoors, use an outdoor
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
• Do not use the power tool if the switch does not turn it on
and off. Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
• Disconnect the plug from the power source before
making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
Additional safety rules for line trimmers
• Always wear adequate protective clothing when operating
the machine to avoid injuries to face, eyes, hands, feet,
head or hearing. Use safety glasses or a face shield, high
boots or sturdy shoes, long trousers, work gloves, a hard
hat and hearing protection.
• Store idle power tools out of the reach of children and do
not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
• When starting up and when the machine is in operation,
keep the cutting section away from all parts of the body,
especially the hands and feet.
• Maintain power tools. Check for misalignment or binding
of moving parts, breakage of parts and any other
condition that may affect the power tool’s operation. If
damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
• Do not start the machine when it is upside down or when
it is not in the operating position.
• Switch the motor off and pull out the plug when the
machine is not being used, left unattended, being
cleaned, being moved from one place to another or
when the spool is being changed or the length of line
manually adjusted.
• Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
• Use the power tool, accessories and tool bits etc., in
accordance with these instructions and in the manner
intended for the particular type of power tool, taking
into account the working conditions and the work to be
performed. Use of the power tool for operations different
from intended could result in a hazardous situation.
• If there is an interruption to the power supply or the
extension cable is damaged, switch off the machine
immediately and remove the plug from the power point.
• Do not move the machine by pulling on the electrical
cable. Always use the handgrip.
• Do not operate the machine near people, especially
children or pets. Turn it off if they get too close. Maintain
a safe distance of at least 5m from other people when
using the machine.
Service
• Have your power tool serviced by a qualified repair
personnel using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
• Keep a balanced and stable stance while using
the machine.
Additional safety Instructions
• This appliance is not intended fot he use by young and
infirm person unles have been adequately supervised
by a responsible person to ensure that they can use the
appliance safely. Young children should be supervised to
ensure that they do not play with thhe appliance
• Ensure that the area being cut is free from strings,
stones and debris.
• Do not cut against hard objects. This could cause injury
to the operator and damage to the machine.
• Never use the machine without the guard. Never use the
machine if the guard is damaged.
• Before use check the supply and extension cord of signs
of damage or aging. If the cord becomes damaged during
use, disconnect the cord from the supply immediately.
DO NOT TOUCH THE CORD BEFORE
WARNING. The guard is vital for your and other people’s
safety and for the machine’s operating efficiency.
DISCONNECTING THE SUPPLY. Do not use the
applance if the cord is damaged or worn.
• Do not try to stop the cutting device (nylon line) with your
hands. Always let it come to a stop by itself.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING. After switching off the machine, the cutting
device continues to rotate for a few more seconds.
Unpacking
Due to modern mass production techniques, it is unlikely
that your power tool is faulty or that a part is missing.
If you find anything wrong, do not operate the tool until the
parts have been replaced or the fault has been rectified.
Failure to do so could result in serious personal injury.
• Only use the original type of nylon line. Under no
circumstances use metal line instead of nylon.
• Do not use the machine to cut grass which is not on the
ground. For example, do not cut grass which is on walls
or rocks.
Contents of carton
• Secondary handle with clamp nut and locking knob
• Do not switch on the machine in enclosed or poorly
ventilated spaces or in the presence of inflammable
and/or explosive substances such as liquids, gasses
and powders.
• Safety guard (2 parts)
• 5 Safety guard fixing screws
• 2 Guard washers (1 split, 1 flat)
• Carry strap
• Only cut during broad daylight or with adequate
artificial light.
• Check that all grass cuttings and dirt have been removed
from the ventilation vents.
• Do not cross roads or gravel paths with the machine
still running.
• When the machine is not in use, store it in a dry place
and out of reach of children.
• After use, disconnect the machine from the power supply
and check for damage. If you have the slightest doubts,
contact an authorised service centre.
• Only use the machine according to the instructions given
in this manual.
• Check regularly that the screws are tight.
• Do not try to repair the machine or access internal parts.
Contact authorised service centres only.
• Do not get distracted and always concentrate on what
you are doing. Use common sense. Never operate the
machine when you are tired, sick or under the influence
of alcohol or other drugs.
Wear goggles
Wear ear defenders
Wear a breathing mask
6
Download from Www.Somanuals.com. All Manuals Search And Download.
16. Secondary handle locking knob
17. Shaft locking nut
Know your product
14
2
Before using the line trimmer,
familiarise yourself with all the
operating features and safety
requirements.
18. Guard locking screw
19. Guard split washer
20. Guard washer
This line trimmer is to be used for
trimming soft, new growth only. Use
the tool and accessories only for
the applications intended. All other
applications are expressly ruled out.
21. Guard fixing screws
22. Guard fixing point
23. Upper shaft
1
4
1. Power cable restraint
2. Handle
3. Trigger switch
4. Secondary handle
5. Lower shaft
23
18
19
20
6. Trimming head
7. Guard
8. Line cutting blade
9. Spool
5
16
21
10
10. Safety guard mount
11. Shaft locking knob
12. Shaft locking button
13. Lock-off button
14. Carry strap hook
15. Carry strap
15
11
13
17
8
9
7
12
6
3
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
To attach the two sections of the shaft
It is necessary to fit the guard (7) to the lower shaft (5) and
the secondary handle (4) to the upper shaft (23).
1. Align the two sections of the shaft and, keeping the
head straight, fully insert the lower section until the shaft
locking button (12) engages in the locating hole in the
upper shaft. The head will be in the normal operating
position.
1. Ensure the switch is in the
off position and disconnect
the cable plug from the
mains supply.
Note. If the two shafts do not fully fit together, rotate the
head of the line trimmer to assist in aligning the drive shafts.
2. Position the safety guard
mount (10) at the bottom of
the lower shaft. Ensure the
middle hole of the mount
lines up with the guard fixing
point (22).
2. Tighten the upper shaft section to the lower shaft by
turning the shaft locking knob (11) clockwise and firmly
gripping the shaft locking nut (17).
3. Place the guard split washer
(19), followed by the guard
washer (20) onto the guard
locking screw (19), insert into
the centre hole of the safety
guard mount and tighten into
the guard fixing point.
Fitting the carry strap
1. Hook the strap (15) to the carry strap hook (14) on the
front of the handle.
4. Fix the guard in place with the
four fixing screws (21).
2. Adjust the length of the strap as required.
Before starting
Before use, check that the tool is in good working order and
that the length of the trimmer line is correct, as follows:
1. Ensure the switch is in the off position and disconnect the
cable plug from the mains supply.
2. Examine the general condition of the tool. Inspect the
guard, switch, cordset and extension cord. Check for
loose screws, misalignment, binding of moving parts,
improper mounting, broken parts and any other condition
that may affect its safe operation.
5. Fit the secondary handle (4) to the upper shaft (23) by
fitting the handle over the shaft and placing the locking
clamp nut (included) through the holes in the guard
and tightening in the most comfortable position to the
secondary handle locking knob (16).
If abnormal noise or vibration occurs during operation,
turn the line trimmer off immediately and have the
problem corrected.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Ensure that you are on a
flat surface and have secure
footing.
Note. To feed out line when you bump the base of
the trimmer, the line trimmer must be operating close to
full speed.
4. Check that the line touches
or goes beyond the edge of
the guard.
A spring-loaded button on the spool holder is depressed
when the trimmer is “bumped” and this releases line due to
the inertial force of the spinning spool. If too much line is fed
out and it projects beyond the guard edge, it is cut by the
blade in the guard. It is only necessary to replace line that
is broken during use. Do not “bump” to excess as it wastes
line. It takes a little practice and experience to judge when
to “bump”.
WARNING. For your own safety
when adjusting the length of the line, avoid coming into
contact with the line cutting blade (8) which is fixed to the
guard. It is extremely sharp. Keep your hands well away
from this area.
Note. Do not cut damp or wet grass. Dry grass will give
excellent results.
Switching on and off
1. Connect the plug to the
power supply.
Note. Always let the line trimmer rotate at top speed, do not
work in such a way as to overload the trimmer.
4. Cut the grass by swinging the machine from right to left
and proceed slowly keeping the trimmer inclined forwards
at an angle of about 30º.
Starting
2. Depress the lock-off button
(13) and squeeze the trigger
switch (3).
5. High grass should be cut in layers always beginning from
the top. Do not cut damp or wet grass. Do not overload
your machine.
Stopping
3. When you release the trigger, the machine turns
off and the lock-off button re-engages to prevent
accidental operation.
6. Avoid wearing the line out quickly by knocking against
hard objects (stones, walls, fences etc.).
7. Watch out for kickbacks in the event of impact with
hard objects.
WARNING. The tool runs for approximately 5 seconds after
it has been switched off. Let the motor come to a complete
standstill before setting the tool down.
WARNING. Never pass the machine over the extension
cable while the machine is running. Make sure it is always
in a safe position behind your back.
Trimming
1. Make sure that the work area is free of rocks, debris,
lines and other foreign objects.
Changing the line and spool
1. Disconnect the trimmer from
the power supply.
2. To start the line trimmer, first push the lock-off button
(13) and then press the trigger switch (3). To switch off
the trimmer simply release the starting switch. Start the
machine before approaching the grass to be cut.
2. Turn the machine upside
down, so you have access to
the cutting line in the trimming
head.
3. Short or worn line cuts less efficiently, so to improve its
operation tap the spool lightly on the ground while the
trimmer is running at full speed. This will activate the self-
adjustment of the cutting line to the correct length.
3. Whilst holding the trimming
head (6), turn the spool (9)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
anti-clockwise, as indicated by
the “OFF” arrow, to unscrew it
from the trimming head (6).
9. When operating for the first
time after changing the spool
of line ensure to test the
assembly by running the line
trimmer in a safe location. The
line may not be fully extended
so you may need to “bump”
the head at full speed to feed
the line to the correct length.
4. The spool will then become
loose. Remove the spool and
spring from the spindle.
5. Cut two 3m equal lengths of
2mm line. Thread the first line
through the top hole, above
the spool divider. Wind it in
an anti-clockwise direction, as
shown by the arrows on the
base of the spool. Then insert
the other length of line in the
bottom hole and wind it in anti-
clockwise around the spool.
Power cable restraint
During the use of the line
trimmer, the extension cord will
continually be pulled as you
move from one area to another.
A power cable restraint (1)
support has been provided on
the housing of the line trimmer to
assist in preventing the electrical
connection between the extension
cord and the line trimmer plug
being forced apart.
6. Leaving 15cm of line, lock
each end into the slots on
opposite sides of the spool.
7. Place the spring over the
spindle. Insert each of the
cutting lines through the
eyelets in the cutting head
assembly. Feed the line
through the holes while
lowering the spool.
Note. The support is for the extension cord, and not the
cable from the line trimmer.
To fit the extension cord to the support, make a loop in the
extension cord and fit the loop into the curved recess at the
back of the line trimmer. Push the loop downwards so it fits
securely into the round cut away section.
8. Once the spool is in place,
apply pressure on the spool,
compressing the spring. Pull
each end of the line sharply
to unlock the line from the
slots. Ensure both lines have
disengaged the slots before
proceeding. Continue to apply
pressure to the spool and
screw the spool (9) clockwise
onto the spindle. Tighten the
spool securely.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and cleaning
General inspection
1. Store the tool, instruction manual and accessories in a
secure, dry place. In this way you will always have the
information ready to hand.
Regularly check that all the fixing screws are tight. They
may vibrate loose over time.
Storage
2. Keep the tool’s air vents unclogged and clean at all times.
1. Store the trimmer away from direct sunlight.
3. Remove dust and dirt regularly. Cleaning is best done
with a rag.
2. Do not store in a nylon bag as this can encourage the
formation of mould.
4. All bearings and bushes are lubricated for life.
3. At the end of the season, give the trimmer an overall
cleaning and a thorough check.
5. If the cordset is damaged or worn, it must be replaced by
the manufacturer, or service agent or a similarly qualified
person in order to avoid a hazard.
4. Do not leave the trimmer resting on the floor for extended
periods as it could cause the shape of the guard to
alter, posing a safety risk. Hang it off the floor by the top
handgrip.
6. Never use caustic agents to clean plastic parts.
CAUTION. Do not use cleaning agents to clean the plastic
parts of the tool. A mild detergent on a damp cloth is
recommended. Water must never come into contact with
the tool.
Power cord maintenance
If the supply cord needs replacing, the task must be carried
out by the manufacturer, the manufacturer’s agent, or an
authorised service centre in order to avoid a safety hazard.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
GMC customer assist
If your product needs repairing, replacing,
technical service or you simply need help or advice,
please contact us on our Customer Assist Line
1300 880 001 (Australia) or 0800 445 721 (New Zealand).
For prompt service we suggest you log your service request
access to the Internet, please contact our service department
on 1300 880 001 (Australia) or 0800 445 721 (New Zealand).
7am –7pm, 7days a week (AEST).
Please note that if repair or replacement is required,
you must provide a valid original purchase receipt.
You will need the following details at hand to log your service request;
Personal details: First & Last name, address, pick up address,
contact phone numbers, email address
Product details: Product number, date of purchase, retailer bought from,
State & postcode, receipt number, reason for the request,
copy of official purchase receipt
Attach your purchase receipt and save with this Manual for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
|