DC-M50
digital camera
user's guide
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM REQUIREMETS WINDOWS
• Windows®98 / 98 SE / Windows®2000 Prof./ Windows® Me / Windows®XP
• 32 MB RAM
• 110 MB free memory capacity
• VGA color monitor
• CD ROM drive
• USB
SYSTEM REQUIREMETS
IMac,iBook,G3 blue&white series,G4 series
• MacOS 9.0~10.1.3
• 64 MB RAM or higher
• 110 MB free memory capacity
• VGA color monitor
• CD ROM drive
• USB
Download from Www.Somanuals.com. All Manuals Search And Download.
Take the time to read through this instruction manual so you can enjoy all your
camera’s features.
Canada
Industry Canada (IC)
Unintentional emitter per ICES-003 / NMB-003
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus as set out in the radio interference regulations of Industry Canada.
Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de Classe B prescrites dans le règlement sur le brouillage
radioélectrique édicté par Industrie Canada.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory compliance statements
United States of America
Federal Communications Commission (FCC)
Unintentional emitter per FCC Part 15
This device has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio or television reception. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause interference to
radio and television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment to an outlet on a different circuit from that to which the receiver is
connected. Consult the dealer or an experienced radio/TV technician for help.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Compliance Accessories: The compliance accessories associated with this equipment are shipped
with it. These accessories are required to be used in order to ensure compliance with FCC rules.
Do not remove the ferrite cores from the cables.
FCC declaration of conformity
Responsible party:
Gateway Companies, Inc.
610 Gateway Drive, North Sioux City, SD 57049
(605) 232-2000 Fax: (605) 232-2023
This device complies with Part 15 of the FCC Rules. Operation of this device is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital Camera
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference recieved, including interference that
may cause undesired operation.
DC-M50
Tested To Comply
With FCC
Standards
FOR HOME OR OFFICE USE
This Class B digital apparatus complies with Canadian ICES-003.
Do not remove the ferrite cores from the cables.
Caution
Changes or modifications not expressly approved by Gateway could void the FCC compliance and
negate your authority to operate the product.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
FOR PROPER AND SAFE USE
Read and understand all warnings and cautions before using this product.
This is a descriptive statement that warns of the result if the instructions are
ignored or not understood.
WARNING
Batteries may become hot or explode due to improper use.
• Use only the batteries specified in this instruction manual.
• Do not install the batteries with the polarity (+/-) reversed.
• Do not attempt to recharge, short, or disassemble.
• Do not mix batteries of different types, brands, ages or charge levels.
• Follow local regulations for battery disposal.
Use caution, accidents may occur when using this product near young children. Keep batteries or
things that could be swallowed away from young children. Contact a doctor immediately if an object
is swallowed. Immediately remove the batteries and discontinue use if:
• The camera is dropped or subjected to an impact in which the interior is exposed.
• The product emits a strange smell, heat, or smoke.
Do not walk while looking at the monitor.
Do not disassemble. Electric shock may occur if a high voltage circuit inside
the camera is touched.
• Do not use batteries which show wear or damaged.
• Do not expose batteries to fire, high temperature environment, water or moist places.
• Do not store the batteries nearby metalic products.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
• Never charge alkaline batteries.
• Do not use leaking batteries. If fluid from the batteries gets in your eyes, immediately rinse eyes
with lots of fresh water and contact the doctor.If fluid from the batteries makes contact with your
skin or clothing, wash the area thoroughly.
• Do not fire the flash directly into the eyes or at vehicle operators. It may cause eyesight injury or
cause an accident.
• Do not use the camera in a humid environment, or operate with wet hands. If any liquid flows into
the camera, immediately remove the power supply (including batteries and adapter) and
discontinue use. Or it may cause electric shock.
• Do not use the camera near flammable gases or liquids or use them to clean the camera like
gasoline,benzine,or paint thinner. Or it may cause an explosion or fire.
• Do not just pull on the power cord while unplugging from the outlet on the wall. Holding the adapter
plug unit is recommend.
• Do not continue to use if the camera has an odor, or smoke. Immediately remove the power supply
taking care not to burn yourself.
Contact Gateway when repairs are required.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
The temperature of the camera rises with extended periods of use. Use cautiously when handling the
camera or removing the batteries and Compact Flash® card.
• Do not leave the camera in places subject to extermely high temperatures, like a sealed vehicle,
direct sunlight or other places of high temperature.
• Exposure to high temperature may adversely affect the internal components of the camera.
• Always unplug the camera from the power supply for safety purposes when the camera is not in
use for long periods.
• Allowing dust to accumulate in the camera over a long period is hazardous as extreme
circumstances may cause a fire. It is best to clean the camera prior to seasonal periods of high
humidity.
• Consult Gateway for information on the cost of cleaning your camera.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Check the packing list before you begin. If some parts are missing, contact your Gateway.
• Gateway DC-M50 5MP Digital Camera (x 1)
• AA-size Alkaline Batteries (x 4)
• Video Cable (x 1)
• Hand Strap (x 1)
• Camera Case (x 1)
• USB Cable (x 1)
• 32 MB CompactFlash Card (x 1)
• Software and Documentation on CD-ROM:
USB Driver Software for Windows ® 98 / Windows ® 98 SE / Windows ® 2000 / Windows ® XP
and Mac OS 9.0~10.1.3
Instruction Manual (PDF) Windows ® /Macintosh
Photo Impression, Video Impression
• Documentation (Printed)
Warranty Card (x 1)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
FOR PROPER AND SAFE USE . . . . . . . . . . .4
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . .7
TABLE OF CONTENTS . . . . . . . . . . . . . . . . . .8
NAMES OF PARTS . . . . . . . . . . . . . . . . . . . .12
CAMERA BODY . . . . . . . . . . . . . . . . . . . .12
INSIDE THE TERMINAL COVER . . . . . .14
BOTTOM OF BODY . . . . . . . . . . . . . . . . .14
DATA PANEL . . . . . . . . . . . . . . . . . . . . . .15
VIEWFINDER . . . . . . . . . . . . . . . . . . . . . .16
AUTO POWER OFF . . . . . . . . . . . . . . . . . .28
USING THE DC
ADAPTER (Sold Separately) . . . . . . . . . . .28
INSERTING/REMOVING THE COMPACT
FLASH (CF) CARD . . . . . . . . . . . . . . . . . . . . .29
INSERTING THE CF CARD . . . . . . . . . . .29
REMOVING THE CF CARD . . . . . . . . . . .30
TAKING PICTURES
BASIC RECORDING PROCEDURE. . . . . . . . .33
THE RECORDING MODE DISPLAY ON THE
LCD MONITOR . . . . . . . . . . . . . . . . . . . . . . . .35
THE DISPLAY OF THE CAMERA SETTINGS .36
ADJUSTING THE FOCUS . . . . . . . . . . . . . . . .37
FOCUS LAMP . . . . . . . . . . . . . . . . . . . . . . .37
QUICK REFERENCES . . . . . . . . . . . . . . . . .18
GETTING STARTED . . . . . . . . . . . . . . . . . . .18
TAKING PICTURES . . . . . . . . . . . . . . . . . . . .18
MONITORING THE CAPTURED IMAGES . .20
DELETING IMAGES . . . . . . . . . . . . . . . . . . .21
PREPARATION
FOCUS DISTANCE IN THE AUTOFOCUS
MODE (Minimum Focus Distance)....................37
THE SUBJECT THAT IS DIFFICULT TO
FOCUS
ATTACHING THE HAND STRAP . . . . . . . . . .24
INSERTING THE BATTERIES . . . . . . . . . . . .25
CHECKING THE BATTERY POWER . . .27
11
Download from Www.Somanuals.com. All Manuals Search And Download.
IN THE AUTOFOCUS MODE . . . . . . . . . . . . .38
WHEN THE SUBJECT IS NOT IN THE
MOVIE CLIP PLAYBACK . . . . . . . . . . . . .60
MOVIE CLIP SETTING . . . . . . . . . . . . . . .60
VOICE RECORDING . . . . . . . . . . . . . . . . . . .61
VOICE PLAYBACK . . . . . . . . . . . . . . . . .62
CENTER OF THE FRAME
(Focus Lock Function) . . . . . . . . . . . . . . . . .39
ADJUSTING THE FOCUS DISTANCE . . . .40
CLOSE UP . . . . . . . . . . . . . . . . . . . . . . . . .41
ADJUSTING THE FOCUS AREA . . . . . . . .43
FLASH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
FLASH RANGE . . . . . . . . . . . . . . . . . . . . .44
SELECTING THE FLASH MODE . . . . . . .45
FLASH LAMP . . . . . . . . . . . . . . . . . . . . . ..46
SPECIFYING THE RECORDING MODE
SPECIFYING THE RECORDING MODE . . . .64
THE RECORDING MODE MENU DISPLAY
(LCD Monitor) . . . . . . . . . . . . . . . . . . . . .64
RECORDING MODE MENU ITEMS . . . .64
SPECIFYING IMAGE QUALITY MODE . . . . .68
SPECIFYING THE IMAGE SIZE MODE . . . .71
SPECIFYING WHITE BALANCE MODE . . . .73
ADVANCED OPERATIONS
P/A/S/M EXPOSURE
SPECIFYING THE SHARPNESS MODE . . .75
RESETING TO THE RECORDING MODE DEFAULT
SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
EXPOSURE MODES . . . . . . . . . . . . . . .48
DIGITAL ZOOM . . . . . . . . . . . . . . . . . . . . . . . .50
BURST IMAGE CAPTURE . . . . . . . . . . . . . . .52
SELF-TIMER . . . . . . . . . . . . . . . . . . . . . . . . . .54
ISO SETTING . . . . . . . . . . . . . . . . . . . . . . . . .56
EXPOSURE COMPENSATION . . . . . . . . . . ..57
MOVIE CLIP SHOT . . . . . . . . . . . . . . . . . . . . . .59
12
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFYING THE PLAYBACK MODE
PLAYBACK MODE
THE PLAYBACK MODE MENU . . . . . . . . . .101
THE PLAYBACK MODE MENU
SINGLE-FRAME PLAY . . . . . . . . . . . . . . . . . . 80
THE PLAYBACK MODE DISPLAY ON THE
LCD MONITOR . . . . . . . . . . . . . . . . . . . . .81
THE IMAGE INFORMATION DISPLAY
IN THE PLAYBACKMODE . . . . . . . . . . . . .82
INDEX PLAY . . . . . . . . . . . . . . . . . . . . . . . . . . 83
ZOOM PLAY . . . . . . . . . . . . . . . . . . . . . . . . . . 85
SLIDE SHOW
(LCD Monitor) . . . . . . . . . . . . . . . . . . . . . . .101
THE PLAYBACK MODE MENU ITEMS AND
EACH SETTINGS . . . . . . . . . . . . . . . . . . . .101
SPECIFYING THE PRINT SETTINGS WITH
THE DPOF . . . . . . . . . . . . . . . . . . . . . . . . . .103
SPECIFYING THE IMAGE AND THE
NUMBER TO BE PRINTED . . . . . . . . . .104
SPECIFYING THE INDEX PRINT
TO START THE SLIDE SHOW . . . . . . . . .87
TO STOP THE SLIDE SHOW . . . . . . . . . .88
THE SETTING IN THE SLIDE SHOW
MODE MENU . . . . . . . . . . . . . . . . . . . . . .89
SETTINGS . . . . . . . . . . . . . . . . . . . . . . .106
TO CANCEL THE PRINT SETTINGS WITH
THE DPOF . . . . . . . . . . . . . . . . . . . . . . .108
FOLDER NAME . . . . . . . . . . . . . . . . . . . . . .109
SELECTED AN FOLDER . . . . . . . . . . . .110
GIVE FOLDER A NEW NAME . . . . . . . . .111
On DCF (Design rule for Camera File system)
FORMAT . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
DELETING IMAGES
DELETING SELECTED IMAGE . . . . . . . . . . .92
DELETING ALL IMAGES. . . . . . . . . . . . . . . . .95
DELETING FOLDERS . . . . . . . . . . . . . . . . . .97
ADJUSTING THE BRIGHTNESS OF THE LCD
MONITOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
13
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
CONNECTING TO THE PERSONAL
COMPUER
THE SETUP MODE MENU DISPLAY . . . . . .115
THE SETUP MODE MENU DISPLAY ON
THE LCD MONITOR . . . . . . . . . . . . . . . . .115
THE SETUP MODE MENU ITEMS AND
EACH SETTINGS . . . . . . . . . . . . . . . . . . .115
SPECIFYING THE TIME FOR THE AUTO
POWER OFF FUNCTION . . . . . . . . . . . . . . .117
FORMATTING THE CFCARD . . . . . . . . . . .119
SETTING THE DATE / TIME . . . . . . . . . . . .121
SETTING THE BEEP SOUND . . . . . . . . . . .123
SWITCHING THE VIDEO SIGNAL FROM
THE VIDEO OUTPUT TERMINAL . . . . . . . .125
SWITCHING THE LANGUAGE DISPLAYED
ON THE LCD MONITOR . . . . . . . . . . . . . . . .127
RESETTING TO THE DEFAULT SETTINGS.128
CONNECT TO PERSONAL COMPUTER
For Windows® 98 . . . . . . . . . . . . . . . . . .131
Installation of Digital Image(Mac) . .135(144)
For Macintosh . . . . . . . . . . . . . . . . . . . . 141
CAUTIONS WHEN CONNECTING TO THE
PERSONAL COMPUTER . . . . . . . . . . . . . .153
INSTALLING of Photo Impression & Video
Impression(Mac) . . . . . . . . 135(148)&141(151)
APPENDIX
WATCHING THE CAPTURED IMAGES
ON TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
TROUBLESHOOTING . . . . . . . . . . . . . . . . 151
NOTES ON THE HANDLING . . . . . . . . . . .155
CARE AND STORAGE . . . . . . . . . . . . . . . .159
TECHNICAL DETAILS. . . . . . . . . . . . . . . . 160
14
Download from Www.Somanuals.com. All Manuals Search And Download.
NAMES OF PARTS
CAMERA BODY_ FRONT VIEW
* Do not touch.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CAMERA BODY_REAR VIEW
* Do not touch.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
INSIDE THE TERMINAL COVER
USB connector
Video-out terminal
DC terminal
BOTTOM OF BODY
Battery-chamber door
Tripod socket
17
Download from Www.Somanuals.com. All Manuals Search And Download.
DATA PANEL
The following diagram shows the items displayed on the data panel.
Flash-mode indicators
Image-size indicators
Battery-condition indicator
Self-timer indicator
Number of recordable remaining frames/
No-card indicator
* Refer to the number of recordable remaining frames as a guide.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
VIEWFINDER
Focus Iamp
(green)
Close-framing guide
Flash Iamp
(red)
Close-framing guide
When you shoot a subject which is closer than 3ft (100 cm ) through the viewfinder, only the part
under the close-framing guide is recorded. So, use the LCD monitor to check the image composition
when you shoot a subject which is closer than 3ft (100 cm ).
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Focus Lamp (Green)
Lights.
The focus is determined and locked.
The focus is not determined.
(The subject contrast is too low, the subject is too dark or too close,
or the subject is too far in the close up mode.)
Blinks quickly (about 8
times in a second).
The image is being recorded in the CF (Compact Flash) card.
The camera reads out the image from the CF card.
Blinks slowly (about 2
times in a second).
Focus Area (as a Guide)
In the autofocus mode,
the focus is adjusted at
the gray part as shown
in the figure.
Flash Lamp (Red)
Lights.
The flash is ready.
Blinks quickly when the shutter-release
button is pressed half-way down
(about 8 times in a second).
The flash is being charged.
The shutter-release button is not released.
The shutter speed becomes slow.
Taking a picture in this mode may cause
a blurred image.
(When the flash function is cancelled)
Blinks slowly (about 2 times in a second).
20
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK REFERENCES
GETTING STARTED
1 Insert the batteries (see page 25).
2 Insert the CF card (see page 29).
TAKING PICTURES – See page 33 for details.
1 Rotate the function dial to
.
2 Slide the power switch to turn on the camera.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Determine the image composition while looking into LCD
monitor or viewfinder.
4 Adjust the image range and size with the four-way keys
(
/
).
• When the
key is pressed, the image size becomes large.
key is pressed, the image range becomes wide.
• When the
5 Press the shutter-release button half-way down.
When the image is focused, the focus lamp (green) lights up.
•
6 Press the shutter-release button all the way down to take
the picture.
• The captured image is displayed on the LCD monitor.
• While the captured image is recorded in the CF card, the focus lamp (green)
blinks slowly (about 2 times in a second).
22
Download from Www.Somanuals.com. All Manuals Search And Download.
MONITORING THE CAPTURED IMAGES – See page 82 for details.
1 Rotate the function dial to
.
2 Slide the power switch to turn on the camera.
• The last recorded image is displayed on the LCD monitor.
3 When the
or
key is pressed, the image changes to the
previous or next one respectively.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
DELETING IMAGES – See page 92 for details.
1 Display the image to be deleted on the LCD monitor by
performing steps 1 to 3 of "MONITORING THE
CAPTURED IMAGES" described on the previous page.
2 Press the MENU button.
• The playback mode menu is displayed on the LCD monitor.
3 After confirming that [SELECTED IMAGE] is highlighted,
press the
key.
4 When the selected image is highlighted, press the ENTER
button.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
• The image to be deleted is displayed on the LCD monitor and a message to
confirm whether you want to delete the image appears as shown in the
figure.
5 Press the
the key.
key so that [YES] is highlighted and press
• The image displayed on the LCD monitor in step 1 is deleted.
6 To complete the operation of deleting an image, after
confirming that [NO] is highlighted in the display to confirm,
press the
key.
• The LCD monitor display returns to the playback mode menu.
7 Press the MENU button.
• The LCD monitor display returns to the playback mode.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION
26
Download from Www.Somanuals.com. All Manuals Search And Download.
ATTACHING THE HAND STRAP
1 Insert the smaller loop of the hand strap through the strap
eyelet.
2 Insert the other end of the hand strap through the small
loop.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
INSERTING THE BATTERIES
This camera uses four AA-size alkaline or Ni-MH batteries.
* When using AA-size Ni-MH batteries, fully recharge them with a vendor-endorsed battery charger.
1 When replacing the batteries, slide the power switch to turn
off the camera.
• You may skip this step when inserting the batteries for the first time.
2 Slide the battery-chamber door slightly in the direction of
the arrow 1 and open it in the direction of the arrow 2 .
3 Insert the batteries by following the +/- diagram in the front
of the battery-chamber door.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Close the battery-chamber door in the direction of the arrow
1 and slide it until it clicks 2 .
• After replacing the batteries, check that the built-in clock (date and time) works correctly (See page
121).
If the camera is not used more than 5 minutes, the built-in clock may delay or be reset to the
default setting. In this case, set the date and time again by following the procedure described on
page 121.
• Do not place the camera with the battery-chamber door facing down when the battery-chamber
door is open. Doing so may damage the battery-chamber door.
• Because the batteries become hot right after the camera is operated, be careful when replacing the
batteries.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
CHECKING THE BATTERY POWER
When the batteries are installed in the camera, the camera checks the battery power automatically
and shows the result on the data panel.
lights - The battery power is sufficient.
Lights - Prepare new batteries. Even in this status, the recording
or playback can be performed.
All indicators go out, blinks for 5 seconds and then, all indicators go out again.
• Replace all batteries with new ones.
Taking a picture or playing back cannot be excuted.
* When nothing is displayed on the data panel, make sure that the batteries are installed with a
correct polarity (+/-). When nothing is displayed even though the batteries are installed correctly,
replace the batteries with new ones.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
AUTO POWER OFF
To save the battery power, this camera will turn off automatically if it is not operated for more than 3
minutes. (Auto Power Off function)
To operate the camera, slide the power switch to turn on the camera again.
•
•
When using the batteries, the time for the auto power off function can be changed to 1 minute, 5
minutes, 10 minutes or 30 minutes. See page 117 for details.
When using the AC adapter (sold separately), this camera will turn off automatically if it is not
operated for more than 30 minutes. The time for the auto power off function is fixed at 30 minutes.
We recommend you use the AC adapter (sold separately) when using the camera indoors where an
AC outlet can be used to supply power to the camera or when connecting the camera to a computer
for editing the images.
Be sure to turn off the power of the camera when changing the power supply from the batteries to the
AC adapter or vice versa. Do not change it when the camera is turned on.
1 Connect the mini plug on the AC adapter to the DC terminal
on the camera.
• The shape of the mini plug may vary depending on the AC adapter.
2 Connect the power plug on the AC adapter to an AC outlet.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
INSERTING/REMOVING THE COMPACT FLASH(CF) CARD
Be sure to turn off the camera when inserting or removing the CF card into or from the camera.
Otherwise, the data in the card may be lost or the card may be damaged.
If you insert or remove the CF card when the camera is turned on, re-format the CF card after
transferring the data from the card to your computer if the data is safe.
INSERTING THE CF CARD
1 Open the card-slot door as shown in the figure.
2 Insert the CF card into the card slot.
• Position the flat edge side of the card towards the camera lens and insert the
card with the signal part facing down until the card stops.
• Insert the card straight. Do not insert it on the angle.
• If the card is stopped halfway, check the direction of the card. Forcing the
card into the slot may damage the card or the camera.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
INSERTING/REMOVING THE COMPACT FLASH(CF) CARD
3 Fold the card-release lever down as shown in the figure.
• Be sure to fold the lever. Otherwise, the card-slot door cannot be closed.
4 Press the card-slot door until it clicks.
REMOVING THE CF CARD
1 Make sure that the power is turned off.
2 Open the card-slot door as shown in the figure.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
INSERTING/REMOVING THE COMPACT FLASH(CF) CARD
3 Lift the card-release lever up as shown in the figure.
4 Push the card-release lever straight in.
• When the CF card ejects slightly from the camera, pull out the card.
• Be careful with the card because it may be hot.
• Keep the CF card in the protection bag supplied with the card.
5 Press the card-slot door until it clicks.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
TAKING PICTURES
35
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC RECORDING PROCEDURE
1 Rotate the function dial to
.
2 Slide the power switch to turn on the camera.
• The power switch returns to the initial position.
When the power switch is on in the recording mode, the LCD
monitor is off. If you need to turn on the LCD, press
once.
3 Determine the image composition while looking into the LCD
monitor or viewfinder.
• When holding the camera, be sure not to cover the lens with your fingers or
other objects.
• When the focus is not adjusted for the subject, use the focus lock function
(see page 39).
4 Adjust the image range and size with the
/
keys.
• When the key is pressed, the image size becomes large (Telephoto
mode). When the
key is pressed, the image range becomes wide
(Wide-angle mode).
36
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Press the shutter-release button half-way down.
• The camera adjusts the focus automatically. When the subject is focused,
the focus lamp (green) lights up.
• When the focus lamp (green) blinks, follow the operation from step 3 again.
• When the flash will fire, the flash lamp (red) lights up.
• When the flash lamp (red) blinks slowly (about 2 times in a second), the
shutter speed becomes slow. Taking a picture in this mode may cause an
image blurred. We recommend you take pictures after fixing the camera on
the tripod.
*
When pressing the
shutter-release but-
ton, the button stops
half-way. This action
is described as
"Press half-way
down" in this manu-
al.
6 Press the shutter-release button the rest of the way down.
• If the flash lamp (red) blinks when the shutter-release button is pressed
all the way down, the flash is being charged. When the shutter-release
button is kept pressed in this status, the shutter is released at the same time
when the flash is charged.
• The captured image is displayed on the LCD monitor and is recorded on the
CF card. While the image is recorded, the focus lamp (green) blinks slowly
(about 2 times in a second) and "RECORDING" blinks on the LCD monitor
slowly. Be sure not to open the battery-chamber door or remove the CF card
until the recording is complete. Otherwise, the data on the CF card may be
damaged or lost.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
THE RECORDING MODE DISPLAY ON THE LCD MONITOR
Each time the display button
is pressed, the display on
the LCD monitor changes in the following order.
The LCD monitor is turned off
Live view
(The camera settings are not displayed)
Live view
(The camera settings are displayed)
38
Download from Www.Somanuals.com. All Manuals Search And Download.
THE DISPLAY OF THE CAMERA SETTINGS
(For details, see the pages in parentheses)
39
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE FOCUS
FOCUS LAMP
When the shutter-release button is pressed half-way, the camera adjusts the focus automatically and
the focus lamp (green) shows the focus status (when the focus mode is set to the autofocus mode.)
Lights
The focus is determined and locked.
The focus is not determined.
The shutter can be released.
Blinks quickly
(about 8 times in a second)
When the focus lamp (green) blinks, check the following points:
• Do you need to adjust the focus on the subject which is difficult to focus in the autofocus mode?
(See page 38).
• Is the subject closer than the minimum focus distance [or farther than 15.7 inches (39.9 cm) in the
close up mode]? (Refer to the following.)
FOCUS DISTANCE IN THE AUTOFOCUS MODE (Minimum Focus Distance)
The focus distance in the autofocus mode is described on the list below.
When the subject is closer than the minimum focus distance of 15.7 inches (40 cm) or farther than
15.7 inches (40 cm) in the close up mode, the focus lamp (green) blinks.
Standard mode
15.7 inches (40 cm) to ∞ (infinity)
Close up mode
3.1 inches (8 cm) to 15.7 inches (40 cm)
(Refer to the page 53)
40
Download from Www.Somanuals.com. All Manuals Search And Download.
THE SUBJECT IS DIFFICULT TO FOCUS IN THE AUTOFOCUS MODE
The autofocus mode uses the image contrast (the difference between light and dark parts) on the
CCD (Charge Coupled Device) to focus on. Therefore, with the autofocus mode, the focus may not be
adjusted correctly on the following subjects. In this case, use the focus lock function (see page 39).
Some subjects at different
distances overlap in the
focus range.
The subject is too dark.
The subject has no
contrast such as a blue sky
or a white wall.
The subject is too bright
such as a shining car body
or a surface of water.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
WHEN THE SUBJECT IS NOT IN THE CENTER OF THE FRAME
(Focus Lock Function)
When the subject is not in the center of the frame, the camera adjusts the focus on the background. In
this case, take a picture with the focus lock function.
1 Aim the camera so that the subject is in the center
of the frame and press the shutter-release button
half-way down.
• The camera adjusts the focus automatically. When the focus is
adjusted, the focus lamp (green) lights.
2 While you are pressing the shutter-release button
half-way down, change the camera position to
obtain the desired image composition and press the
button all the way down to take a picture.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE FOCUS DISTANCE
Pressing the
key allows you to adjust the focus distance for the best situations.
Auto focus
(No icon)
The camera will automatically adjust the focus according to distance of the subject.
The camera sets the focus at infinity. Flash is disabled by default.
Landscape
Close up
Specified
The camera will focus closely on a subject from 3.1 inches (8 cm) to 15.7 inches (40 cm)
away.
The camera will focus at a specified distance. Options are 19.6 inches (50 cm), 39.3
inches (100 cm), and 98.4 inches (250 cm).
1 Rotate the function dial to
.
• Be sure that the camera is turned on.
2 Press
key to change the focus distance.
• The icons on upper-right side of the LCD monitor will change.
3 Press the shutter-release button half-way down to adjust the
focus.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
CLOSE UP
The close up function allows you to take a picture as close as 3.2 inches (8 cm) to the subject, and
fills the frame with the subject in about 2.4 inches (6 cm) x 1.6 inches (4 cm).
1 Rotate the function dial to
.
• The recording mode menu is displayed on the LCD monitor.
2 Press
button to change the Focus distance to
.
•
is displayed on the upper-right side of the LCD monitor and indicates that
the close up mode is selected.
• The flash mode is set to "FLASH CANCEL"
automatically. When the
close up mode is selected, the flash does not fire.
3 Determine the image composition while looking into the
LCD monitor.
• There is a difference between the image range through the viewfinder and
the actual one in the close up mode. We recommend you to use the LCD
monitor when you determine the image composition.
• We recommend you set the camera on a stable surface or attach it to a
tripod.
• The LCD monitor cannot be turned off in the close up mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
44
4 Press the shutter-release button half-way down.
• If the focus lamp (green) blinks, make sure that the subject is within 3.1
inches (8 cm) to 15.7 inches (40 cm) [is not more than 15.7 inches (40 cm)
from the camera].
5 Press the shutter-release button all the way down to take
the picture.
• Even after taking a picture, the close up mode is not cancelled. When the
camera is turned off and on again, the camera enters autofocus mode.
• When the camera enters the autofocus mode, the flash mode is returned to
"AUTOFLASH WITH RED-EYE REDUCTION".
45
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE FOCUS AREA
Adjust the focus area while looking into the LCD monitor.
1 Rotate the function dial to
and press the MENU button.
• The recording mode menu is displayed on the LCD monitor
2 Press the
press the
or
key.
key so that [FOCUSING] is highlighted and
3 Press the or key to select desired focus area and press
the key to finish the setting.
Central
Spot
46
Download from Www.Somanuals.com. All Manuals Search And Download.
FLASH
The following 5 flash modes are available.
The flash fires automatically when the light level
is low or the subject is backlit.
AUTOFLASH
The flash fires every time a picture is taken
regardless of the brightness.
For example, select this mode to reduce the
harsh shadows when you take the picture out-
doors and the subject’s face is shaded with a hat.
The flash does not fire. Select this mode when
taking a picture in the place where the flash
photography is prohibited such as in a museum.
The flash fires the short burst 2 times before the
main flash burst to reduce the red-eye phenomenon.
Select this mode when taking a picture of people or
animals in the dark
FILL-FLASH
FLASH
CANCEL
AUTOFLASH WITH RED-EYE
REDUCTION
*The flash fires even in long shutter night mode, to
get the best exposure of a subject.
NIGHT MODE
Flash Range
The flash range has the limit. Take pictures by referring to the flash range indicated below.
The flash range:wide 19.6 inches (50 cm)~118.1 inches (300 cm)
The flash range:Tele 19.6 inches (50 cm)~98.4 inches (250 cm)
47
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING THE FLASH MODE
1 Rotate the function dial to
• The recording mode menu is displayed on the LCD monitor.
.
2 Press the
or
key to change the Flash mode as follows :
AUTOFLASH
FILL-FLASH
FLASH-CANCEL
AUTOFLASH WITH RED-EYE
REDUCTION
NIGHT MODE
48
Download from Www.Somanuals.com. All Manuals Search And Download.
*The camera usually shows the icon
on the upper-left side of the LCD monitor when taking a
shot of a darker subject with FLASH-CANCEL mode
steady when taking the picture.
. The icon reminds you to hold the camera
• The icon for the selected flash mode (see previous page) is displayed on the upper-right side of the
LCD monitor (see page 36).
• The flash mode returns to "AUTOFLASH WITH RED-EYE REDUCTION" when the camera is turned
off and on again.
Flash Lamp
The flash lamp (red) shows the flash status.
Lights
The flash is ready to fire.
Blinks quickly when the
shutter-release button is pressed all
the way down (about 8 times in a
second).
The flash is being charged. The shutter-release
button is not released.
Blinks slowly when the flash function
is cancelled (about 2 times in a
second).
The shutter speed becomes slow. Taking a picture
in this mode may cause an blurred image.
The flash function is cancelled when the flash
mode is set to "FLASH CANCEL," when the drive
mode is set to the burst image capture, or when
the focus mode is set to the close-up mode.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
ADVANCED OPERATIONS
50
Download from Www.Somanuals.com. All Manuals Search And Download.
P/A/S/M EXPOSURE
EXPOSURE MODES
These 4 exposure modes allow extensive control over general photo taking. Programmed Auto P
gives carefree operation. Aperture Priority A and Shutter Priority S allow users to maximize exposures
in different cases. Manual Exposure M provides complete freedom in controlling the exposure.
When to use it
Options
Purpose
Recommened in most situations.
Programmed auto The camera will automatically set the
shutter speed and aperture value for
best exposure.
Recommended in controlling the depth of
field (makes the main subject stand out
from the surroundings).
Aperture priority
(F3.37-F15)
The user selects the aperture and the
camera sets the shutter speed.
Recommended to freeze the action of a
fast-moving subject or create a sense of
motion for a slower-moving subject.
You have complete control of the
exposure.
Shutter priority
(1/2600s-8s)
The user selects the shutter speed
and the camera sets the aperture.
Manual exposure The user selects both the shutter
speed and aperture.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
P/A/S/M menu:
(Rotate the function dial to
and press the MENU button.)
1 Press the
highlighted and press the
2 Select the desired mode by pressing
the key to confirm the settings.
In A/S/M mode:
/
key so that [P/A/S/M Exposures] is
key.
/
and pressing
Programmed Auto
Aperture Priority
Shutter Priority
1. Press the
/
key to change the desired value of the aperture or
shutter speed.
Manual Exposure
Aperture Priority
Shutter Priority
Manual Exposure
You can adjust both aperture and shutter speed in Manual Exposure
mode.
2. Press the shutter-rlease button half-way down to adjust.
3 Press the MENU button to quit the setting.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL ZOOM
The digital zoom function can increase the maximum magnification (about 0.9 inches)(2.4 cm) of the
optical zoom lens (4 inches in the 1.3 inches film format equivalent)(10.2 cm in the 3.4 cm film format
equivalent) up to 2 times.
1 In the recording mode, press the
zoomed to the maximum.
key so that the image is
2 Press and hold the
key for more than 2 seconds.
• The digital zoom function is set.
• The indicator that shows the image range appears on the LCD monitor as
shown in the figure (left below). When the indicator appears, remove your
finger from the
key.
• The digital zoom function cannot be set when the LCD monitor is turned off.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
3 While looking into the LCD monitor, determine the image
composition so that the desired image is positioned within
the range of the indicator.
4 Press the shutter-release button half-way down.
5 Press the shutter-release button all the way down to take a
picture.
• The focus lock function can be also used (see page 39).
• Even after taking a picture, the digital zoom is not cancelled. To cancel the
digital zoom function, press and hold the
key until the indicator
disappears or turn the camera off and on again.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
BURST IMAGE CAPTURE
The camera will continuously take pictures while the shutter-release button is held down.
The maximum number of images that can be captured at a time (with 32MB CF card) is:
Image quality
The maximum number of the pictures (as a guide)
2560 x 1920 size
about 13 pictures
about 26 pictures
about 52 pictures
1600X1200 size
about 30 pictures
about 60 pictures
about 90 pictures
FINE (Fine)
STD. (Standard)
ECON. (Economy)
* See page 68 for the image quality and page 71 for the image size.
* The number of the pictures changes according to the scene or subject you record.
1 Rotate the function dial to
and press the
button.
• The camera settings are displayed.
2 Press the ENTER button to select [DRIVE MODE] as follows:
• The continuous icon
appears on the upper-right side of the LCD
monitor. (See page 36)
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Single shot
Continuous shot
Continuous with AF
Self-timer
• When taking a continuous shot, the flash mode is set to "FLASH CANCEL"
automatically.
• When the single shot or the self-timer shot is selected, the flash mode returns to "AUTOFLASH
WITH RED-EYE REDUCTION".
56
Download from Www.Somanuals.com. All Manuals Search And Download.
SELF-TIMER
The picture is taken about 10 seconds after the shutter-release button is pressed.
1 After fixing the camera on a tripod, rotate the function dial
to
.
2 Press the ENTER button to change the [DRIVE MODE]
to SELF-TIMER
Single shot
.
1 shot only, even if you keep pressing shutter
release.
Continuous while pressing shutter release.
Continuous shot
Continuous with AF
Self-timer
3 Determine the image composition while looking into LCD
monitor or viewfinder and adjust the image range and size
with the
• When the
or
key.
key is pressed, the image size becomes large (Telephoto
mode). When the
key is pressed, the image range becomes wide
(Wide-angle mode).
57
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Press the shutter-release button half-way down.
5 Press the shutter-release button all the way down to start
timer.
• While the self-timer is functioning, the self-timer lamp in the front of the
camera blinks. As the timer runs down, the lamp blinks faster. Just before the
picture is taken, the lamp lights continuously.
• The beep sounds when the lamp blinks. (The beep can be canceled with the
menu in the SETUP mode.)
• When the subject is not in the center of the frame, use the focus lock function.
(See page 39.)
• After taking the self-timer shot, the camera resets to the single-shot.
* Do not press the shutter-release button when standing in front of the camera. The camera cannot
adjust the focus.
* To interrupt the self-timer shot, rotate the function dial to
, PC or SETUP.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
ISO SETTING
Select the camera's sensitivity to light.
ISO is the standard used to indicate film sensitivity. Raising the ISO sensivity will mean that the
camera needs less light in order to take an image. However, the higher the ISO value is, the grainier
the image will be.
1 Turn on the camera, rotate the function dial to
press the MENU button.
, and
key.
AUTO
2 Select the desired ISO value by pressing the
The default is AUTO.
/
3 Press the
key to confirm the setting and press the MENU
button to close the menu.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPOSURE COMPENSATION
This function makes the image brighter or darker by adjusting the exposure compensation value for
the CCD. The bigger the exposure compensation value is, the brighter the image is, and the smaller
the exposure compensation value is, the darker the image is.
1 Rotate the function dial to
and press the MENU button.
• The recording mode menu is displayed on the LCD monitor.
2 Press the
press the
or
key.
key so that [Exposure] is highlighted and
key so that [EV] is highlighted and press
3 Press the
or
the
key.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Press the
or
key to select the desired exposure
compensation value and press the
setting.
key to save the
• The exposure compensation value (from +2.0 to –2.0) can be changed by
increments of 0.3.
5 Press the MENU button.
• The exposure compensation value is specified and displayed on the
upper- right side of the LCD monitor (see page 36).
6 Press the shutter-release button all the way down to take
picture.
* To cancel the exposure compensation function, follow the operation steps described above and
specify 0 for the exposure compensation value, or turn the camera off and on again.
* When the image to be captured is whitish, increase the exposure compensation value so that the
white part can be easily represented. When the image to be captured is blackish decrease the
exposure compensation value so that the black part can be easily represented.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
MOVIE CLIP SHOT
Movie clip shot
This function allow users to take Motion Pictures in the camera with 15fps.
1 Rotate the function dial to MOVIE CLIP mode
.
• The LCD monitor will be displayed as shown.
2 Press the shutter button once and movie clips are recorded
for as long as the available recording time allows.
• Movies clips will still be recorded if the shutter button is released.
3 If you wish to stop recording, press the shutter button again.
4 Image size and type are listed below.
-Image size :QVGA (320X240)
-File type : *.AVI
When the movie clip is being recorded to the CF CARD, the
Green lamp blinks. The [RECORDING] message will be dis-
played on the LCD monitor.
Note
• The recording may be suspended during the available recording time due to the CF CARD capacity.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
MOVIE CLIP PLAYBACK
1 Rotate the function dial to
• The image files (including movie clips) will be shown on LCD monitor.
2 Press the key to select the movie clip file.
• The movie clip shows the icon on top of the LCD monitor.
3 Press the key to play the movie clip (PLAY&PAUSE).
.
/
• Press once: PLAY
Press again: PAUSE
MOVIE CLIP SETTING
1 Rotate the function dial to
• [REC.TIME] (recording time) is adjustable.
and press the MENU button.
2 Press
the
/
key so that [REC.TIME] is highlighted and press
key.
• You can select the recording time from 5s~30s in 5s increments.
3 Press the key to select the desired value and press
the key.
/
4 Press MENU button to close the menu.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
VOICE RECORDING
RECORDING VOICES FOR PICTURES
This function allows the user to record some voices in any picture.
1 Rotate the function dial to
.
• The last image taken is displayed on LCD monitor.
2 Press the
or
key to select the desired image to add a
recording to.
3 Press the
key. The recording starts, and the sound
recording indicator
is displayed.
• The sound will record for 10 seconds.
4 Press the
key again to stop recording.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
VOICE PLAYBACK
1 Rotate the function dial to
.
• The last shot taken is displayed on LCD monitor.
2 Press the
or
key to select the image file with voice.
• The icon is displayed on LCD monitor.
3 Press the
key for PLAY & PAUSE.
• Press once: PLAY
Press again: PAUSE
65
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFYING
THE RECORDING MODE
66
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFYING THE RECORDING MODE
THE RECORDING MODE MENU DISPLAY (LCD Monitor)
THE RECORDING MODE MENU ITEMS
FLASH
(Auto-flash)
(For the Flash mode, see page 44)
(Fill-flash)
(Flash cancel)
(Auto-flash with red-eye reduction)
(Night mode)
FOCUSING
Central
Spot
(For the Focus mode, see page 37)
ISO
AUTO
(For the ISO setting, see page 56)
ISO100
ISO200
ISO400
67
Download from Www.Somanuals.com. All Manuals Search And Download.
(Single shot)*
DRIVE MODE
(For the Drive mode, see page 52)
(Continuous shot )
(Continuous with AF)
(Self-timer shot)
IMAZE SIZE
(For the Image size, see page 71)
FULL (2560X1920)
LARGE (1600X1200)
HALF(1280X960)
VGA (640X480)
QUALITY
(For the Image quality, see page 68)
FINE (Fine mode)
STD. (Standard mode)
ECON. (Economy mode)
(Auto setting)*
(Daylight)
WHITE BALANCE
(For the White Balance, see page 73)
A
(Light bulb)
(Fluorescent)
(Cloudy)
(WB Preset)
68
Download from Www.Somanuals.com. All Manuals Search And Download.
+2.0
+1.7
+1.3
+1.0
+0.7
+0.3
0*
-0.3
-0.7
-1.0
-1.3
-1.7
-2.0
EXPOSURE
EV
AREA
(For the Exposure com-
pensation,
FULL
CENTRAL
SPOT
see page 57)
SHARPNESS
(For the Sharpness, see page 75)
HARD
NORMAL
SOFT
LCD
9(bright)
(For the LCD, see page 99)
8
7
6
DEFAULT
(For the Default, see page 77)
YES
NO
5
4
3
2
1
0(dark)
69
Download from Www.Somanuals.com. All Manuals Search And Download.
MOVIE CLIP SHOT(For the MOVIE CLIP MODE,see page 59)
REC.TIME
30s
25s
20s
15s
10s
5s
* The settings indicated with an asterisk (*) are resumed when the camera is turned off and on, or
when the batteries are removed and inserted. For "QUALITY" and "IMAGE SIZE," the camera
remembers the last setting before the camera is turned off or before the batteries are removed.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFYING THE IMAGE QUALITY MODE
This camera has 3 image quality modes; "
"(fine), "
" (Standard) and "
" (economy).
The image quality is related to the compression ratio of the image. The compression rate is higher in
the order of " ". The higher the compression rate is, the lower the
image quality is. When you want high quality images, select " ". However, as the compression rate
"
"
"
"
is low, the number of the images to be recorded on the CF card is less than that in the "
mode. When you want to record as many images as possible on the card , select "
However, as the compression rate is high, the image quality is lower than in the "
" or "
" or "
" mode.
"
".
The compression rate, image recording format, image file size and the recordable number of the
images using a 32 MB CF card in each mode are as follows.
(Fine)
about 1/4
(Economy)
about 1/12
(Standard)
about 1/8
The compression rate
The image recording format
The image file size
Exif2.1-JPEG (DCF standards)
about 2400 KB
about 13
about 600 KB
about 52
about 1200 KB
about 26
The number of images
using a 32 MB CF card
* Refer to the image file size and recordable number as a guide. These vary according to the scene or subject to be
recorded.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Rotate the function dial to
and press the MENU button.
• The recording mode menu is displayed on the LCD monitor.
2 Press the
press the
or
key.
key so that [QUALITY] is highlighted and
3 Press the
or
key so that the desired image quality mode
is highlighted and press
key to save the setting.
• The image quality mode changes in the following order.
(Fine mode)
(Standard mode)
(Economy mode)
72
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Press the MENU button.
• The selected image quality mode is specified and displayed on the
upper-left side of the LCD monitor (see page 36).
* It does not matter if there are images recorded in different image quality modes on one CF card.
* The setting of the image quality mode is stored in the camera’s memory even after the camera is
turned off.
* Changing the image quality mode affects the remaining number of images which can be recorded
on the card. Selecting " ", in particular, may considerably reduce the remaining number of
images.
We recommend you to check the number display of recordable remaining frames on the data panel.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFYING THE IMAGE SIZE MODE
Before taking pictures, select the image size. Changing the image size affects the number of the
images which can be recorded on the CF card. The " FULL, " " LARGE, " " HALF " or "VGA" size
can be selected.
Number of Pixels (W x H)
2560X1920
Image Size
FULL
1600X1200
LARGE
HALF
1280X960
640X480
VGA
1 Rotate the function dial to
and press the MENU button.
• The recording mode menu is displayed on the LCD monitor.
2 Press the or
key so that [IMAGE SIZE] is highlighted and
press the
key.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Press the
or
key so that the desired image size mode
is highlighted and press the
key.
• The image size mode changes in the following order.
FULL (2560X1920)
LARGE (1600X1200)
HALF (1280X960)
VGA (640X480)
4 Press the MENU button.
• The selected image size mode is specified and displayed under the image
quality on the upper-left side of the LCD monitor (see page 36).
* The setting of the image size mode is stored in the camera’s memory even after the camera is
turned off.
* Changing the image size mode affects the remaining number of images which can be recorded on
the card. We recommend you to check the number display of recordable remaining frames on the
data panel when you change the image size mode.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFYING THE WHITE BALANCE MODE
This camera has 6 white balance modes.
Auto white balance
AUTO
Automatically adjusts white balance according to light source incident on the CCD.
Daylight mode
Select this mode when taking a picture of the subject illuminated by sunlight.
Light bulb mode
Select this mode when taking a picture of the subject illuminated by an incandescent
light or tungsten light.
Fluorescent mode
Select this mode when taking a picture of the subject illuminated by a fluorescent light.
Cloudy mode
Select this mode when taking a picture of the subject on a cloudy day.
WB Preset mode
Select this mode by using the WB preset white balance setting.
* WB Preset means measuring the white point from a white sheet of paper or card (or
nearby wall), the camera will then record that temperature and use it to correct all
images until you reset it.
1 Rotate the function dial to
and press the MENU button.
• The recording mode menu is displayed on the LCD monitor.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Press the
highlighted and press the
or
key so that [White Balance] is
key.
3 Press the
mode is highlighted and press
or
key so that the desired white balance
key.
• The white balance mode changes in the following order.
(Auto white balance)
A
Daylight mode
Light bulb mode
Fluorescent mode
Cloudy mode
WB Preset mode
77
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Press the MENU button.
• The selected white balance mode is specified and the icon of the selected
white balance mode is displayed on the left side of the flash mode on the
upper-right side of the LCD monitor (see page 36). However, when "AUTO"
is selected, the icon
still appears on the LCD monitor.
A
78
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFYING THE SHARPNESS MODE
This camera has three sharpness modes as described below.
HARD
This enhances the sharpness of image.
No effect on sharpness.
NORMAL
SOFT
This reduces the sharpness of image and makes an image soft.
1 Rotate the function dial to
and press the MENU button.
• The recording mode menu is displayed on the LCD monitor.
2 Press the
and press the
or
key so that [SHARPNESS] is highlighted
key.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Press the
highlighted.
or
key so that the desired [sharpness] is
• The sharpness mode changes in the following order.
HARD
NORMAL
SOFT
4 Press the
key.
5 Press the MENU button.
• The selected sharpness mode is specified and there would be no icon
displayed on the LCD monitor even if "HARD" or "SOFT" is
selected.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
RESETING TO THE RECORDING MODE DEFAULT SETTINGS
This allows you reset this camera’s RECORDING MODE to the default settings.
The camera settings
Flash
The default settings
Autoflash with red-eye reduction
Focus-mode
Focus-Area
Drive Mode
Image size
Quality
Auto
Central region
Single
Full (2560x1920)
Standard
Auto
White Balance
Exposure-EV
Exposure-Area
Sharpness
LCD
0
Central region
Normal
5
81
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Press the or
key so that [DEFAULT] is highlighted and
press the
key.
2 Press the
key.
key so that [YES] is highlighted and press the
• The camera settings are reset to the default.
• The LCD monitor display returns to the recording mode menu.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
PALYBACK MODE
83
Download from Www.Somanuals.com. All Manuals Search And Download.
SINGLE-FRAME PLAY
The images recorded on the CF card can be displayed on the LCD monitor one frame at a time.
1 Rotate the function dial to
.
• The function dial can be rotated even when the camera is turned on.
2 If the camera is not turned on, slide the power switch to
turn on the camera.
• The power switch returns to the initial position.
• The last recorded image is displayed on the LCD monitor.
3 Press the or key to display the desired image.
• When the key is pressed, the following image is displayed. When the
key is pressed, the preceding image is displayed.
• When the last recorded image is displayed and the
first recorded image is displayed.
key is pressed, the
• When the first recorded image is displayed and the
last recorded image is displayed.
key is pressed, the
84
Download from Www.Somanuals.com. All Manuals Search And Download.
THE PLAYBACK MODE DISPLAY ON THE LCD MONITOR
THE PLAYBACK MODE DISPLAY ON THE LCD MONITOR
Each time the display button is pressed, the display on the LCD
monitor changes in the following order.
Single-frame play
(with the image information)
Index
(9 frames)
Single-frame play
(with no image information)
85
Download from Www.Somanuals.com. All Manuals Search And Download.
THE IMAGE INFORMATION DISPLAY IN THE PLABACK MODE
Frame number of the image/Total frames
recorded on the CF card
Recorded date and time of the image
When the camera enters the index play mode, the
frame number of the image displayed last in the
single-frame play mode is highlighted. (The fifth
frame is the last displayed image in the figure above.)
Download from Www.Somanuals.com. All Manuals Search And Download.
86
INDEX PLAY
This mode allows you to display 9 frames at a time on the LCD monitor. It is convenient when you
want to find the desired image quickly.
1 When the camera is set to the single-frame play mode,
press the display button
• When the image information is displayed in the single-frame play mode,
press the display button twice and when no information is displayed,
once or twice (see page 81).
press the display button once.
• The frame number of the image displayed last in the single-frame play mode
before switching to the index play mode is highlighted. The other frame num-
bers are displayed in white on the images.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Press the
• When the
,
,
or
key is pressed, the following image is selected and the frame
key is pressed, the preced-
key to select the desired image.
number of the image is highlighted. When the
ing image is selected and the frame number of the image is highlighted.
• When the ninth frame is selected (when the number 9 is highlighted) and the
key is pressed, the next 9 frames are displayed.
• When the tenth frame is selected (when the number 10 is highlighted) and
the
key is pressed, the preceding 9 frames are displayed.
3 Press the display button
once (see page 81).
• The display on the LCD monitor switches to the single-frame play mode
(with the image information) from the index play mode.
• The selected index image (whose frame number was highlighted) is dis-
played in the single-frame play mode.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
ZOOM PLAY
This mode allows you to increase the magnification of the image around the center 2.0 times and
display it on the LCD monitor. It is convenient when checking the details of the image.
1 Rotate the function dial to
and press the MENU button.
• The playback mode menu is displayed on the LCD monitor
2 Press the
3 Press the
or
key so that "ZOOM" is highlighted.
key.
• The center part of the image selected in the single-frame play or the index
play mode is magnified 2.5 times.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Press the
image.
,
,
or
key to scroll the magnified
• The image moves slightly in the direction of the key you press. The image
keeps moving while the key is held and pressed.
5 To cancel the zoom play mode, press the MENU button.
• When the zoom play mode is switched to the single-frame play mode, the
single-frame play (with the image information) mode returns. When the zoom
play mode is switched to the index play mode, the single-frame play (with no
image information) mode returns when the display button is pressed and the
index play mode returns when the button is pressed again.
* In the zoom play mode, the image around the center is displayed in 640 x480 pixels on the LCD
monitor.
90
Download from Www.Somanuals.com. All Manuals Search And Download.
SLIDE SHOW
The images can be played back continuously on the LCD monitor like an automatic slide show.
TO START THE SLIDE SHOW
1 Rotate the function dial to
and press the MENU button.
• The play back mode menu is displayed on the LCD monitor.
2 Press the
and press the
or
key so that [SLIDE SHOW] is highlighted
key.
3 Press the
press the
or
key.
key so that [START] is highlighted and
• The slide show starts according to the settings in the slide show mode menu
(the settings of "TIME" and "DIRECTION").
91
Download from Www.Somanuals.com. All Manuals Search And Download.
TO STOP THE SLIDE SHOW
• When the
key is pressed while the slide show is playing, the slide show
is temporarily stopped.
• When the MENU key is pressed while the slide show is playing, the
playback mode menu is displayed on the LCD monitor.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
THE SETTINGS IN THE SLIDE SHOW MODE MENU
1 Rotate the function dial to
and press the MENU button.
2 Press the
and press the
or
key so that [SLIDE SHOW] is highlighted
key.
3 Press the
press the
or
key.
key so that [TIME] is highlighted, and
key so that the desired interval time is
4 Press the
highlighted.
or
93
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Press the
6 Press the
key to save the setting.
or
key so that [DIRECTION] is highlighted
key.
and press the
7 Press the
highlighted and press the
or
key so that the desired direction is
key to finish the setting.
• The direction changes in the following order.
FORWARD
BACKWARD
8 Press the
key to start the slide show.
94
Download from Www.Somanuals.com. All Manuals Search And Download.
DELETING IMAGES
95
Download from Www.Somanuals.com. All Manuals Search And Download.
DELETING SELECTED IMAGES
The images recorded on the CF card can be deleted while viewing them on the LCD monitor.
CAUTION
The deleted image cannot be recovered. Be careful when deleting an image.
1 Rotate the function dial to
.
• The function dial can be rotated even when the camera is turned on.
2 If the camera is not turned on, slide the power switch to
turn on the camera.
• The power switch returns to the initial position.
• The last recorded image is displayed on the LCD minitor.
3 Press the
or
key to select the image to be deleted.
• When the
key is pressed, the next image is selected. When the key is
pressed, the preceding image is selected.
96
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Press the MENU button.
• The playback mode menu is displayed on the LCD monitor
5 Press the
press the
or
key.
key so that [DELETE] is highlighted and
6 Press the
and press the
or
key so that [SELECT IMAGE] is highlighted
key.
* The color of the background in the figure to the left is gray so that you can
easily find out the contents of the display. However, the image to be deleted
is actually displayed in the background.
97
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Press the DISPLAY key
to select the image to
key it would show the sign that means the image
delete.
• After pressing the
will be delete.
8 Press the ENTER button so that [YES] is highlighted, and
press key to finish the Deleting.
• "Delete selected image?" is displayed on the monitor.
9 To complete the operation of deleting an image, after
confirming that [YES] is highlighted, press the
key.
• The LCD monitor display returns to the playback menu.
10 Press the MENU button.
• The LCD monitor display returns to the playback mode.
98
Download from Www.Somanuals.com. All Manuals Search And Download.
DELETING ALL IMAGES
All images recorded in this folder can be deleted.
CAUTION
The deleted images cannot be recovered. Be careful when deleting images.
1 Rotate the function dial to
.
• The function dial can be rotated even when the camera is turned on.
2 If the camera is not turned on, slide the power switch to
turn on the camera.
• The power switch returns to the initial position.
• The last recorded image is displayed on the LCD monitor.
3 Press the MENU button.
• The playback mode menu is displayed on the LCD monitor.
99
Download from Www.Somanuals.com. All Manuals Search And Download.
4 After confirming that [DELETE] is highlighted, press the
key.
5 Press the
press the
key so that [ALL IMAGES] is highlighted and
key.
• The message to confirm whether you delete all images appears as shown in
the figure.
• Only the images captured with this camera can be deleted. Even if you insert
a CF card in which the images were captured with another camera, the
images cannot be deleted.
6 Press
finish the Deleting.
• All images recorded on the CF card are deleted.
key so that [YES] is highlighted and press
key to
• While all images are deleted, the focus lamp (green) blinks slowly (about two
times a second).
100
Download from Www.Somanuals.com. All Manuals Search And Download.
DELETING FOLDERS
Delete the folder and all images in the folder
CAUTION
The deleted images cannot be recovered. Be careful when deleting images.
1 Rotate the function dial to
.
• The function dial can be rotated even when the camera is turned on.
2 If the camera is not turned on, slide the power switch to
turn on the camera.
• The power switch returns to the initial position.
• The last recorded image is displayed on the LCD monitor.
3 Press the MENU button.
• The playback mode menu is displayed on the LCD monitor.
101
Download from Www.Somanuals.com. All Manuals Search And Download.
4 After confirming that [DELETE] is highlighted, press the
key.
5 Press the
key so that [FOLDER] is highlighted and press
the
key.
6 Press the
/
key to choose which Folder on the CF
card you want to delete and press the
key.
7 Press the
key so that [YES] is highlighted and press the
key to finish the Deleting.
• All images in the folder and the folder are deleted.
• While all images are deleted, the focus lamp (green) blinks slowly (about two
times a second).
• Or select [NO] to stop the deleting.
102
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE BRIGHTNESS OF THE LCD MONITOR
This allows you to adjust the brightness of the LCD monitor according to the angle at which you watch
it or the brightness around the monitor so that the display on the LCD monitor can be seen clearly.
1 Rotate the function dial to
and press the MENU button.
2 After confirming that [LCD] is highlighted, press the
key.
• If the LCD monitor is turned off, the LCD monitor is automatically turned on
and displays the screen to change the brightness of the LCD.
3 Press the
lighted. Press the
or
key so that the desired brightness is high-
key to set the value you changed.
• The brightness can be adjusted in the range from 0 to 9. The smaller the
number, the darker the LCD monitor. The higher the number, the brighter
the LCD monitor.
* The color of the background in the left figure is gray so that you can easily
find out the contents of the display. However, the live view screen is actually
displayed in the background.
103
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFYING
THE PLAYBACK MODE
104
Download from Www.Somanuals.com. All Manuals Search And Download.
THE PLAYBACK MODE MENU
THE PLAYBACK MODE MENU (LCD Monitor)
THE PLAYBACK MODE MENU ITEMS AND EACH SETTINGS
YES
NO
DELETE
(For deleting images
SELECT IMAGE
DELETE ALL IMAGES
FOLDER
YES
NO
YES
NO
see page 92)
ZOOM
(For the zoom play
mode, see page 85)
SLIDE SHOW
START
(For the slide show
DIRECTION
FORWARD
BACKWARD
mode,see page 87)
TIME
2-10 SEC
105
Download from Www.Somanuals.com. All Manuals Search And Download.
PRINT
STD.
(For specifying the
print settings
with the DPOF, see
page103)
INDEX
CANCEL
NEW
FOLDER
100GW520
SELECT
(see page 110)
Other folder name
LCD BRIGHT
(For adjusting the brightness
9(bright)
8
7
of the LCD
6
5
monitor, see page 99)
4
3
2
1
0(dark)
*
For "DELETE" (deleting images), see page 92. For "ZOOM" (zoom play), see page 85. For "SLIDE SHOW" (auto
play), see page 87. Only the 2 items of "PRINT" (Specifying the print setting with DPOF), "FOLDER" (Folder
name) are described on the following pages.
106
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFYING THE PRINT SETTINGS WITH THE DPOF
This camera supports the DPOF™ (Digital Print Order Format) Version 1.10 so that you can specify
the images and the number of copies to be printed and the print type. So, the specified images can be
printed at the specified number only by giving the CF card or the SmartMedia™, etc. in which not only
the captured images but the DPOF data are recorded, to the photo finishing print service supporting
the DPOF. You do not need to give them the file name or your password. Also, if you set the media
including the DPOF data in the personal printer which supports the DPOF, you can print the specified
images at the specified number automatically.
* The DPOF is jointly developed by Eastman Kodak Company, Canon Inc., Fuji Photo Film Co., Ltd.,
and Matsushita Electric Industrial Co., Led. for direct printing from digital camera.
SPECIFYING THE IMAGE AND THE NUMBER TO BE PRINTED
1 Rotate the function dial to
and press the MENU button.
• The playback mode menu is displayed on the LCD monitor.
2 Press the
and press the
or
key so that [PRINT] is highlighted
key.
107
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFYING THE IMAGE AND THE NUMBER TO BE PRINT
3 Press the
press the
or
key.
key so that [STD] is highlighted and
4 Press the
or
key to select the image to be printed.
• When the image to be printed is selected, the number to be printed is high-
lighted.
• If the sixth frame is selected and the
frames are displayed.
key is pressed, the following 6
key is pressed, the preced-
• When the seventh frame is selected and the
ing 6 frames are displayed.
108
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Press the
• When the
When the
or
key to select the number to be printed.
key is pressed, the number becomes large.
key is pressed, the number becomes small.
6 Repeat step 4 and 5 to specify the number to be printed
for all images.
• For an image you do not want to print, specify 0.
7 Press the ENTER button to finish the setting.
• The DPOF file, including image data and the number to be printed, is record-
ed in the CF card.
• After the file is recorded, the LCD monitor display returns to the PLAYBACK
mode menu.
8 Press the MENU button.
• The LCD monitor display returns to the PLAYBACK mode.
109
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFYING THE INDEX PRINT SETTING
This setting allows you to print all images recorded in the CF card on one sheet as an index print.
1 Rotate the function dial to
and press the MENU button.
• The PLAYBACK mode menu is displayed on the LCD monitor.
2 Press the
or
key so that [PRINT] is highlighted and
press the key.
3 Press the
key so that [INDEX] is highlighted and press the
key to finish the setting.
• The message to confirm whether you want to print the images as an index
print appears.
110
Download from Www.Somanuals.com. All Manuals Search And Download.
• The DPOF file, including data for the index print setting, is recorded on the
CF card.
• After the file is recorded, the LCD monitor display returns to the PLAYBACK
mode menu.
4 Press the MENU button.
• The LCD monitor display returns to the PLAYBACK mode.
111
Download from Www.Somanuals.com. All Manuals Search And Download.
TO CANCEL THE PRINT SETTINGS WITH THE DPOF
All Print settings with the DPOF described on page 103 can be cancelled. The index print setting (see
page 106) is also cancelled.
1 Rotate the function dial to
and press the MENU button.
• The PLAYBACK mode menu is displayed on the LCD monitor.
2 Press the
press the
or
key.
key so that [PRINT] is highlighted and
3 Press the
press the
key twice so that [CANCEL] is highlighted and
key to finish the setting.
• The message to confirm whether you want to cancel all print settings
appears.
112
Download from Www.Somanuals.com. All Manuals Search And Download.
FOLDER NAME
The folder in the CF card conforms with the DCF (Design rule for Camera File system) format.
When taking a picture with this camera, the "Dcim" folder is created in the directory of the CF card
and the "100GW520" folder is made in the "Dcim" folder. The first captured image is recorded with the
file name of "SIMG001.jpg" in the "100GW520" floder. The name of the folder in which the captured
images are recorded is displayed on the PLAYBACK mode menu.
The file name of the image to be recorded con-
sists of "SIMG", "4-digit number" and ".jpg". The
files are recorded in the "100GW520" folder until
the 4-digit number becomes 9999 (the file name
of "SIMG9999.jpg"). When the10000th file is
recorded, the "101MX520" folder is created made
in the "Dcim" folder and the 10000th file is record-
ed with the file name of "SIMG0001.jpg"in the
"101MX520"folder.
There will be two folders for the images on one CF card if you capture more than 10000 images. You
can select the folder in which the image to be played back is recorded by selecting the folder name in
the PLAYBACK mode menu.
113
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECT A FOLDER
Even if another digital camera supporting the DCF format is used to record the captured images on
the CF card, you can insert the CF card into this camera and play back the images by selecting the
particular folder name of other digital camera in the PLAYBACK mode menu.
1 Rotate the function dial to
and press the MENU button.
• The PLAYBACK mode menu is displayed on the LCD monitor.
2 Press the
press the
or
key.
key so that [FOLDER] is highlighted and
key so that [SELECT] is highlighted and
3 Press the
press the
or
key.
• The existing folder is displayed on the LCD monitor.
• After you chose the folder, the new images will be saved in the selected
folder.
114
Download from Www.Somanuals.com. All Manuals Search And Download.
GIVE THE FOLDER A NEW NAME
You could give the folder a new name in the FOLDER-NEW mode.
1 Rotate the funtion dial to
and press the MENU button.
• The PLAYBACK mode menu is displayed on the LCD monitor.
2 Press the
press the
or
key.
key so that [FOLDERS] is highlighted and
key so that [New] is highlighted and press
3 Press the
or
the
key.
115
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Press the
press the
or
key to select the character you want and
key to confirm.
• If you don't want to give a new name, press the MENU button to go back to
the PLAYBACK menu.
5 Press the
key so that the folder name in which the
image to be played back is recorded is highlighted and
press the ENTER button.
• When only "100GW520" folder exists, the folder name does not change
even when the
or
key is pressed.
116
Download from Www.Somanuals.com. All Manuals Search And Download.
On DCF (Design rule for Camera File system) Format
DCF (Design rule for Camera File system) is the image format established by JEODA as the stan-
dard format of digital cameras.
Through this format, the image files can be used between digital equipment that conforms to DCF.
The following operation can be available between digital equipment that conforms to DCF:
• The images captured with your digital camera can be played back on the LCD monitor of another
digital camera.
• The images captured with some digital cameras can be printed out from a printer.
• A recording media (such as a CF card or SmartMedia card) can be used with any of the digital
cameras.
• By using the computer that conforms to DCF, even the image data recorded with some digital
cameras can be easily sorted out.
117
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
118
Download from Www.Somanuals.com. All Manuals Search And Download.
THE SETUP MODE MENU DISPLAY
THE SETUP MODE MENU DISPLAY ON THE LCD MONITOR
FORMAT
NO
YES
(For formatting the CF
card, see page 119)
POWER SAVE
(For the time for the auto power off
1 min. (1 minute)
3 min. (3 minutes)
5 min. (5 minutes)
10 min. (10 minutes)
30 min. (30 minutes)
function, see page 117)
119
Download from Www.Somanuals.com. All Manuals Search And Download.
DATE
TIME
DATE/TIME
YY/MM/DD
HH:MM
(For setting or correcting
the date and time, see
page 121)
BEEP
ON (The beep sounds.)
OFF (The beep does not sound.)
(For turning the beep on or off, see page 123)
PAL
NTSC
VIDEO OUT
(For switching the video signal from the video-out terminal, see page 125)
ENGLISH
GERMAN
LANGUAGE
(For switching the language displayed on the LCD monitor, see page 127)
DEFAULT
NO
(For resetting the camera, see page 128)
YES
120
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFYING THE TIME FOR THE AUTO POWER OFF FUNCTION
To save the battery power, this camera will be turned off automatically if it is not operated for more
than 3 minutes. (Auto Power Off function) The time for the auto power off function is set to 3 minutes
unless you change the setting after you purchase this camera.
1 Rotate the function dial to "SETUP" and slide the power
switch to turn on the camera.
• The power switch returns to the initial position.
2 Press the
button.
• The setup mode menu is displayed on the LCD monitor.
3 Press the
ed and press the
or
key so that [POWER SAVE] is highlight-
key.
121
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Press the
or
key so that the desired time for the
auto power off function is highlighted.
• The time for the auto power off function changes in the following order.
1 min. (1minute)
3 min. (3 minutes)
5 min. (5 minutes)
5 Press the
setting.
key to finish the
10 min. (10 minutes)
30 min. (30 minutes)
The time for the auto power off function can be specified only when using the batteries.
When this camera is connected to the computer, the time for the auto power off function is fixed at 30
minutes automatically regardless of the setting or the power supply.
122
Download from Www.Somanuals.com. All Manuals Search And Download.
FORMATING THE CF CARD
This allows you to format the CF card.
CAUTION
All the images recorded in the CF card are deleted and cannot be recovered. Be careful when
formatting the CF card.
1 Rotate the function dial to "SETUP" and slide the power
switch to turn on the camera.
• The power switch returns to the initial position.
2 Press the
button .
• The SETUP mode menu is displayed on the LCD monitor.
3 Press the
press the
or
key.
key so that [FORMAT] is highlighted and
• The display to confirm whether you want to format the CF card appears.
123
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Press the
key so that [YES] is highlighted and press the
Key to finish the setting.
• The format of the CF card starts.
• After formatting the CF card, the LCD monitor returns to the SETUP mode
menu display.
124
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE DATE / TIME
When taking a picture, the date and time are recorded as the part of the image information. If the
built-in clock is not set correctly, the wrong date and time are recorded. Set the date and time correct-
ly by performing the procedure below.
1 Rotate the function dial to "SETUP" and slide the power
switch to turn on the camera.
• The power switch returns to the initial position.
• The SETUP mode menu is displayed on the LCD monitor.
2 Press the
and press the
• The display to set the date and time appears as shown in the figure.
or
key so that [DATE/TIME] is highlighted
key.
3 Press the
press the
or
key.
key so that [DATE] is highlighted and
125
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Press the
press the
or
key to specify or correct the date and
key to finish the setting.
• When you press and hold the
or
key, the value goes fast-forwrd or
fast-backward.
5 Press the
and press
or
key.
key so that [DATE/TIME] is highlighted
• The display to set the date and time appears as shown in the figure.
6 Press the
press the
or
key.
key so that [TIME] is highlighted and
7 Press the
press the
or
key to specify or correct the time and
to finish the setting.
• When you press and hold the
or
key, the value goes fast-forward
or fast-backward.
126
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE BEEP SOUND
The beep sounds each time you operate this camera with the buttons or function dial and you can
turn the beep off or on. The beep is turned on unless you change the setting after you purchase this
camera.
When you use this camera in a situation where you cannot make noise, such as a wedding ceremony,
you can turn off the beep.
1 Rotate the function dial to "SETUP" and slide the power
switch to turn on the camera.
• The power switch returns to the initial position.
• The SETUP mode menu is displayed on the LCD monitor.
2 Press the
press the
or
key.
key so that [BEEP] is highlighted and
127
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Select [ON] or [OFF] with the
or
key.
• The setting of the beep changes in the following order.
ON (The beep sounds.)
OFF (The beep does not sound.)
4 Press the
key to finish the setting .
• When [OFF] is selected on step 3, the beep does not sound when you
operate with the buttons or the function dial.
• The volume of the beep cannot be changed.
128
Download from Www.Somanuals.com. All Manuals Search And Download.
SWITCHING THE VIDEO SIGNAL FROM THE VIDEO OUTPUT TERMINAL
As this camera has a video-out terminal, you can watch the captured images on TV by connecting this
camera to your TV with the supplied video cable.
The video output signal can be switched between NTSC and PAL.
What is an NTSC system and a PAL system?
Both are the color television broadcast system. The NTSC system is mainly used in U.S.A., Japan, Canada,
Mexico, the Philippines, Korea, etc. The PAL system is used in the western Europe such as Germany, England,
Switzerland, Netherlands, Italy (except for France) and Australia, Singapore, Thailand, China, etc.
As these systems have no compatibility, you cannot watch the NTSC system-based TV in the area where a PAL
system is used.
This camera can switch the video output signal to both an NTSC system and a PAL system. So you can watch the
images on TV not only in your country, but in other areas.
1 Rotate the function dial to "SETUP" and slide the power
switch to turn on the camera.
• The power switch returns to the initial position.
• The SETUP mode menu is displayed on the LCD monitor.
2 Press the
and press the
or
key so that [VIDEO OUT] is highlighted
key.
129
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Select [PAL] or [NTSC] with the
or
key.
• The setting of the TV system changes in the following order.
PAL
NTSC
4 Press the
key to finish the setting.
• The video signal system output from the video-out terminal is switched to
the selected one.
130
Download from Www.Somanuals.com. All Manuals Search And Download.
SWITCHING THE LANGUAGE DISPLAYED ON THE LCD MONITOR
The language displayed on the LCD monitor can be switched to English.
1 Rotate the function dial to "SETUP" and slide the power
switch to turn on the camera.
• The SETUP mode menu is displayed on the LCD monitor.
2 Press the
and press the
or
key so that [LANGUAGE] is highlighted
key.
3 Select [ENGLISH] with the
or
key.
4 Press the
key to finish the setting.
• The language displayed on the LCD monitor is switched to the selected one.
131
Download from Www.Somanuals.com. All Manuals Search And Download.
RESETTING TO THE DEFAULT SETTINGS
This allows you reset all this camera's PLAYBACK MODE, SETUP MODE, and PC MODE to the
default at one time.
The camera playback settings
Delete (see page 92)
The default playback settings
Selected Image
Slide show-Time (see page 89)
Slide show-Direction (see page 87)
Print (see page 103)
2 sec
Forward
STD (standard)
Folders (see page 109)
LCD (see page 99)
100GW520
5
The Camera Setup settings
Power save (see page 117)
Beep sound (see pages 123)
The Camera pc setting
PC connection
The default setup settings
3 minuets
On
The default pc settings
Storage
132
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Rotate the function dial to "SETUP" and slide the power
switch to turn on the camera.
• The SETUP mode menu is displayed on the LCD monitor.
2 Press the
and press the
or
key so that [DEFAULT] is highlighted
key.
• The display to confirm whether you want to reset the camera settings to
the default appears as shown in the figure.
3 Press the
or
key so that [YES] is highlighted and press
key to finish the setting.
• The camera settings are reset to the default.
• The LCD monitor display returns to the SETUP mode menu.
133
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING TO
THE PERSONAL COMPUTER
134
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION OF THE DRIVER AND APPLICATION SOFTWARE
INSTALLATION OF THE DRIVER SOFTWARE
The following operation is required for Windows ® 98 / Windows ® 98SE.
The driver can be used in a Microsoft Windows
series Operating System
( Operating System must support the USB device
first. )
1. Insert the installation CD-ROM.
2. Click "Driver."
Caution:
Windows 2000,Me, and XP don't need the driver.
135
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Click "Next".
4. The driver installation starts.
5. Click "Finish " to complete installation.
136
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Click "Yes" to continue and install DirectX 8.1.
Caution:
We suggest that you install DirectX 8.1 for all Win OS.
7. Click "Yes".
8. The DirectX 8.1 installation starts.
137
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Click "OK" to complete installation.
10. Restart your computer.
138
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION DIGITAL IMAGE AND PHOTOIMPRESSION
For the IBM-PC/AT and the compatible computers.
1. Insert the installation CD-ROM.
2. Click "Application" to install Digital Image and
PhotoImpression.
3. Choose the setup language and click "Next".
4. Click "Next".
Caution: Digital Image is compatible with Win98SE/
2000/ ME/ XP
139
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Click "I accept the terms of the license agreement"
then click "Next".
6. Click "Next".
7. Click "Next".
140
Download from Www.Somanuals.com. All Manuals Search And Download.
8. The installation starts.
9. Click "Finish".
10. Click "Yes".
141
Download from Www.Somanuals.com. All Manuals Search And Download.
11. Click "Next " to continue installing Photoimpression.
12. Click "Yes".
142
Download from Www.Somanuals.com. All Manuals Search And Download.
13. Click "Next".
14. Click "Next".
15. Click "Next".
143
Download from Www.Somanuals.com. All Manuals Search And Download.
16. The installation starts.
17. Click "Finish" to complete the installation.
144
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION VIDEOIMPRESSION1.6 FOR WIN
1. Click "Application" to install VideoImpression.
2. Select language that you want and click "sure".
3. The installation starts.
4. Click "Next".
5. Click "Yes".
145
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Click "Next" to accept the installation folder.
7. Click "Next".
8. Click "Next".
146
Download from Www.Somanuals.com. All Manuals Search And Download.
9. The VideoImpression1.6 installation starts.
10. Click "Finish" to complete the installation.
147
Download from Www.Somanuals.com. All Manuals Search And Download.
For Apple Macintosh (OS9, OS10)
INSTALLATION DRIVER
You do not need to install driver.
INSTALLATION DIGITAL IMAGE
1. Insert the installation CD-ROM.
2. Click "Digital Image Installer".
148
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Click "Digital Image Installer".
4. Click "Accept".
5. Click "install".
149
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Click "Quit".
150
Download from Www.Somanuals.com. All Manuals Search And Download.
For Apple Macintosh (OS9, OS10)
INSTALLATION PHOTOIMPRESSION
1. Insert the installation CD-ROM.
2. Click "PhotoImpression3" to set up the software .
151
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Click the language that you want.
4. Click "PhotoImpression Installer".
5. Click "Accept".
152
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Click "Install" to start the installation.
153
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION VIDEOIMPRESSION1.6 FOR MAC
1. Click "VideoImpression1.6" to set up the software.
2. Select the language that you want.
3. Click "VideoImpression1.6 Installer".
154
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Click "Accept".
5. Click "Install" to start the installation.
155
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTIONS WHEN CONNECTING TO THE PERSONAL COMPUTER
• While this camera is connected to the computer or transferring the image data between this camera
and the computer, do not perform the following operations. Otherwise, an error may occur, the
camera and the computer may not function correctly, or the image data recorded on the CF card
may be erased or damaged.
• Turn off the power of the camera
• Disconnect the USB cable
• Rotate the function dial
• Remove or insert the CF card
When the camera is connected to the computer, the time for the auto power off function is fixed in 30
minutes automatically regardless of the power supply you use or the settings in the SETUP mode
(see page 113).
156
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTIONS WHEN CONNECTING TO THE PERSONAL COMPUTER
When connecting the camera to the computer and transferring the image data between them, be sure
to check that the battery capacity is full. If the battery power is low, the camera may be turned off
while transferring data. If this happens, an error may occur, the camera and the computer may not
function correctly, or the image data recorded on the CF card may be erased or damaged.
157
Download from Www.Somanuals.com. All Manuals Search And Download.
Requirements of Photo Impression & Video impression
To use the supplied image editing applications Photo Impression and Video Impression, the following
systems are required.
For the IBM-PC/AT and compatible computers
CPU
Intel Pentium II processor of 233 MHz or more, or the
computer equipped with a fully compatible processor.
Windows®98/98SE/ME/2000/XP
OS
Windows® NT 4.0 (Service Pack 5)
Memory
16 MB or more of built-in memory (For Windows® NT,
32 MB or more of built-in memory).
Hard disk space 110 MB or more of available hard disk space.
Monitor
CD-ROM drive
Resolution 800 x 600 color monitor for 16-bit color video display
Necessary (when installing and using the software).
For Apple Macintosh
CPU
68040 or later processor or better, or Macintosh or Power
Macintosh
OS
Mac OS9, OS10.1
Memory
32MB RAM or higher
Hard disk space 110 MB or more of available hard disk space.
Monitor
CD-ROM drive
158
The color monitor capable of displaying 256 colors
Necessary (when installing and using the software).
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
159
Download from Www.Somanuals.com. All Manuals Search And Download.
WATCHING THE CAPTURED IMAGES ON TV
WATCHING THE CAPTURED IMAGES ON TV
By connecting this camera to your TV with the supplied video cable, you can watch the captured
images on TV.
1.Confirm that the video out signal from the video-out terminal is set to NTSC or
PAL according to the color system in your country ( see page 125 ).
2.Turn off the camera and TV.
3.Open the terminal cover on the left side of the camera and connect the mini
plug of the supplied video cable to the video-out port on the camera.
• The LCD monitor is turned off.
4.Connect the other end of the video cable to the video input port on the TV.
5.Turn on the TV.
6.Rotate the function dial to
7.Slide the power switch to turn on the camera.
8.Switch the video input of the TV according to the port to which the video cable
is connected.
• The images recorded in the CF card can be displayed both on the LCD monitor and TV.
9.You can watch the images in the various play modes.
• The images can be played back in the slide show mode ( see page 82 ) , etc.
160
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
If you have any trouble with this camera, check the following items. Should the difficulty persist,
contact Gateway.
Problem
Check
Solution
Page
The focus cannot be Did you attempt to adjust the focus Take a picture with the focus lock 39
adjusted in the autofo- on the subject, which is difficult to function or in the manual focus
40
cus mode The focus focus in the autofocus mode?
lamp (green) blinks Did you attempt to take a picture
mode.
Take a picture when the subject is
quickly (about 8 times when the subject is closer than the farther than 1.3ft (39.6 cm), or when
in a second) when the minimum focus distance (1.3ft
shutter-release button =39.6 cm), or farther than 1.3ft
the subject is within the distance
from 0.3ft (9.1 cm)to 1.3ft (39.6cm)
(is not apart more than 1.3ft from
the camera) in the close mode.
Rotate the function dial to
41
is pressed half-way
down.
(39.6 cm) in the close up mode?
Is the camera turned off?
and slide the power switch to turn
on the camera.
33
Is the camera set to another
mode than the recording
mode?
The shutter-release
button is not released.
The image is recorded on the CF
card. Wait until the recording is
completed and the focus lamp
(green) and "Recording" stop blinking.
Is the focus lamp (green)
blinking slowly (about 2 times
in a second) and "Recording"
blinking on the LCD monitor?
35
161
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Check
Solution
Page
The shutter- Is "CARD FULL" displayed on the
The CF card is full. Delete unwanted
images or transfer the image data to
the computer and then delete all
images, or use another CF card, which
has memory space.
release button LCD monitor?
92
is not
released.
Is the camera turned off?
Rotate the function dial to
and slide
33
the power switch to turn on the camera.
The live view Are the batteries exhausted?
is not dis-
Replace all four batteries.
27
28
25
played on the Are the batteries inserted with the
LCD monitor. correct polarity?
Remove the batteries and then insert
the batteries by following the +/-
diagram indicated on the front of the
battery-chamber door.
Is the LCD monitor turned off?
Press the display button to turn on the
monitor.
35
25
The auto power off function activates. Slide the power switch to turn on the
camera again.
162
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem Check
Is the camera turned off?
Solution
Page
80
Rotate the function dial to
switch to turn on the camera.
Replace all four batteries.
and slide the power
Are the batteries exhausted?
25
28
Are the batteries inserted with the Remove the batteries and then insert the batteries by
correct polarity?
The image
cannot be
played
back on
the LCD
monitor.
following the +/- diagram indicated on the front of the
battery-chamber door.
When "NO CARD" is displayed on the LCD monitor and
Is the CF card inserted in the
camera? ( Is "NO CARD"
displayed on the LCD monitor? ) set. Insert the CF card.
The auto power off function
activates.
"CF" is displayed on the data panel, the CF card is not 25
Slide the power switch to turn on the camera again.
25
29
Is the focus lamp ( green )
blinking slowly (about 2 times in card.
The camera reads out the image data from the CF
a second ) and "PLAY BACK" Wait until the reading is completed and the focus lamp
blinking on the LCD monitor?
Did you take a picture within
the flash range?
and "PLAY BACK" stop blinking.
Take a picture within the flash range ( 15 to 118 inches) 44
( 40 to 300 cm ).
The image
recorded in
the flash
mode is
dark.
163
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Page
50
85
Check
Solution
The zoom play
cannot be per-
formed.
Did you take a picture with the
digital zoom function?
The picture captured with the digital zoom
function cannot be played back in the zoom
play mode.
The image is too
dark or bright.
Even when the
lens comes out,
the data panel is
turned off and
the camera can
not function.
The recorded
image file is
99
25
Is the exposure compensation
value specified?
Specify 0 for the exposure compensation
value.
Has the
battery-condition
If the
battery-condition indicator blinks, all
indicator blinked (all the indicators the indicators will disappear after 5 seconds
disappeared after 5 seconds ) ?
while the lens is protruding.
Replace the batteries.
The data is being recorded on or read from the
CF card while the focus lamp ( green ) blinks
slowly (about 2 times in a second ). Do not
remove the CF card from the camera.
Did you remove the CF card when
the image data was recorded on or
read from the CF card?
33
-
damaged.
The camera
Remove the batteries and insert them again.
does not function
correctly due to
the strong static
electricity, etc.
After that, turn on the camera.
* If the camera cannot be turned on correctly, the CF card may be damaged. In
this case, transfer the image data on the CF card to the computer and then format
the CF card.
164
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES ON HANDLING
Batteries
• Battery performance decreases with lower operating temperatures. In a cold place, we recommend you
prepare new batteries and keep the spare batteries in a warm place such as inside your coat.
As the performance of Ni-MH battery decreases, we recommend you use the Ni-MH battery in a cold place.
Even if the battery performance decreases due to a cold environment, the battery can recover its power
when the battery warms up.
• Remove the batteries when they are not in use for an extended period. Battery leakage may damage the
battery-chamber.
• Occasionally, when using alkaline batteries, the battery-condition indicator shows that the battery power is
low even if there is enough power capacity.
Continue to use the camera. The low-battery symbol will disappear.
• As the batteries heat up just after the camera is used, be careful when removing or replacing the batteries.
Turn off the camera and allow the batteries to cool down.
165
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Monitor Care
• The LCD monitor is manufactured using high precision technology. However, there may rarely be a
lack of color or bright points on the LCD monitor.
• Do not apply pressure on the surface of the LCD monitor. Permanent damage may occur.
• In a cold environment, the LCD monitor may be temporarily dark. When the camera warms up,
normal display will be restored.
• The LCD monitor may be slow to react in a low temperature or may be dark in a hot environment.
When the camera warms up, normal display will be restored.
• If there are fingerprints on the LCD monitor surface, gently wipe it with a soft, clean, dry cloth.
Copyright
• TV programs, films, video tapes, and other materials may be copyrighted.
Unauthorized recording of such materials may be contrary to the provision of the copyright laws.
And in some performance and exhibition, etc. taking pictures is prohibited. The image which has a
copyright cannot be used except for the use within the copyright laws.
DPOF
• If the CF card including the DPOF data specified by another camera is inserted in this camera, the
DPOF data will be cancelled.
• Even if you insert the CF card including the data recorded with another digital camera supporting the
DCF format, the DPOF data for the images captured with another digital camera ( the images in the
folder made by another digital camera supporting the DCF format ) cannot be specified in this
camera.
166
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Temperatures and Conditions
• This camera has been designed for use in temperatures from 0ºC to 40ºC (32ºF to 104ºF).
• Never leave the camera exposed to extreme high temperatures, such as in a car parked in the sun, or to
extreme humidity.
• To prevent condensation from forming, place the camera in a sealed, plastic bag when bringing it from a
cold place to a warm place. Allow it to come to room temperature before removing it from the bag.
Safety and Handling for the CF card
• Read and follow the instructions manual supplied with the CF card.
• The following may cause data loss or damage. We are not responsible for it. We recommend you copy a
backup data in another media such as ZIP disc, hard disk, CD-ROM, etc.
1 Improper use of card.
2 Static electrical discharge near the card or electric noise.
3 Removing the card or interrupting the power supply while the camera or equipment is accessing the card
( reading, writing, formatting etc. )
4 Non-use of card for an extended period.
5 Using the card past its life expectancy.
• When the card is formatted, the recorded data is deleted. Be sure to back up data if it is necessary.
• The storage capability of the CF card will diminish with extended use. In this case, buy a new card.
• Keep away from static electricity and electric noise.
• Do not bend, drop, or subject the card to impact.
• Strong static electricity or shock may damage the card so that recording or writing on the card cannot be
performed. In this case, buy a new card.
• Do not touch the electrical contacts on the card with your fingers or a metal object.
• Keep away from heat, moisture, and direct sunlight.
• Keep away from small children.
• When not in use, return the card to its protective case.
167
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
• Do not subject the camera to shock or impact.
• Turn off the camera when transporting it.
• This camera is neither waterproof nor splashproof.
Inserting or removing batteries and the CF card, or operating the camera with wet hands may
damage the camera.
When using the camera at the beach or near water, take care not to drop water or sand on the
camera. If water, sand, dust or salt content accumulates on the camera, it may cause a malfunction.
• Do not leave the camera under direct sunlight. Do not point the lens at direct sunlight. Doing so,
may damage the CCD.
168
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE AND STORAGE
Cleaning
• If the camera or the outside of the lens is dirty, gently wipe it with a soft, clean, dry cloth. If the
camera or lens comes in contact with sand, gently blow away loose particles. Wiping may scratch
the surface.
• To clean the lens surface, first blow away any dust or sand, then, if necessary, moisten a lens tissue
or soft cloth with lens cleaning fluid and gently wipe the lens.
• Never use organic solvents to clean the camera.
• Never touch the lens surface with your fingers.
Storage
• Store in a cool, dry and well-ventilated place away from dust and chemicals.
For very long periods, store the camera in an airtight container with a silica gel drying agent.
• Remove the batteries or the CF card from the camera when not in use for an extended period.
• Do not store the camera in a closet with mothballs.
• We recommend you to press the shutter-release button sometimes during storage. Also, check the
camera’s operation to make sure it is functioning properly before using.
Before Important Events such as a Wedding Ceremony or Overseas Travel
• We recommend you to check the camera’s operation beforehand or take test pictures, and to
prepare spare batteries.
• Gateway has no responsibility for damages incurred by equipment malfunction.
Questions and Service
• If you have questions about your camera, contact your local camera dealer or Gateway.
• Before shipping your camera for repair, contact a Gateway for details.
169
Download from Www.Somanuals.com. All Manuals Search And Download.
TECHNICAL DETAILS
Camera Type
Recording media exchangeable 3X zoom digital camera with LCD monitor
CCD
Pickup elements:
1/1.8 inch-type inter line CCD, 5.13M pixels, with a base color filter
Pickup system:
ISO sensitivity:
single
AUTO ISO 100 200 400
Number of bits converted to A/D: 12 bit
Lens Unit
Focal length:
0.3 inches (0.8 cm) to 0.9 inches (2.4 cm) [1.3 inches (3.4 cm) to 4.0 inches
(10.2 cm) in the 1.3 inches (3.5 cm) film format equivalent )
Wide: F3.37 ,F4.86 ,F7.75 ,F15.03 (4 steps)
Tele :F3.56 ,F5.13 ,F8.2 ,F15.4 (4 steps)
Aperture:
Construction:
Focusing range:
9 elements in 6 groups including 3 aspheric surfaces
15.7 inches (40 cm) to infinity [The close up mode: 3.1 inches (8 cm) to 15.7
(40 cm )]
Digital zoom:
Image Storage
Maximum zoom in the telephoto mode X2
Recording medium: CF card ( Type 1 )
Image file format:
Exit 2.1 ( JPEG ), DCF standards, DPOF 1.10
Number of pixels ( W x H ): 2560x1920 pixels ( Full size )
1280x960 pixels ( Half size )
1600x1200 pixels ( Large size )
640x480 pixels ( VGA size )
170
Download from Www.Somanuals.com. All Manuals Search And Download.
Storage capacity ( Using a 32 M B CF card ) :
2560x1920 size
1600x1200 size
1280x960 size
approx. 50
approx. 100
approx. 175
VGA
175
290
340
FINE
STD.(Standard)
ECOn.(Econmy)
approx. 13 images
approx. 26 images
approx. 52 images
approx. 30 images
approx. 60 images
approx. 90 images
The number of images to be recorded varies depending on the subject.
Other:
Delete function ( Single image. All images ) Format function for the CF Card
171
Download from Www.Somanuals.com. All Manuals Search And Download.
Autofocus
System:
AF system by CCD
Focus locked when the shutter-release button is pressed halfway.
One shot AF
Focus mode :
Manual Focus :
Avaliable (operated with
,
,
and
keys.)
Auto Exposure (AE) Control
Exposure mode :
Programmed AE
AE Locked when the shutter-release button is pressed halfway.
Center weighted TTL metering
CCD electrical shutter (with a Mechanical shutter)
Shutter speed:1/2600 sec. to 8sec.
Metering :
Shutter:
Exposure compensation: ± 2EV in 1/3EV increments
White balance :
LCD Monitor
Type :
Automatic, Manual setting available(outdoors,tungsten,fluorescent)
1.8 inch (46mm) TFT-LCD module
Approx.60,000
Pixels :
Bright level :
9 steps
Language display : English,German
Display :
Single frame display, index display (9 frames), slide show, magnification display,
( the zoom play, X2, changing magnification area available)
Viewfinder
Type :
Real image zoom finder
Fineld of view ( 3 m) : more than 80%
Eye-relief :
0.7 inches (19 mm)
Magnification :
X 0.35 to X 0.902(Wide:0.350x,tele:0.902x)
172
Download from Www.Somanuals.com. All Manuals Search And Download.
Drive Mode
Mode: Single shot, continuous shot(approx.1 frame / sec.), self-timer shot
Self-timer:
Approx. 10 second delayed release
Built-in Flash
Charge time:
Flash modes:
Approx. 8 second at fill flash
Autoflash, Fill-flash,Flash cancel, Autoflash with red-eye reduction,Fill-flash with
(Flash cancel in the close up mode),night mode.
Flash intensity control: Adjusted automatically by an external light
Interface
Video output:
PC interface:
Power Supply
Batteries:
Compositevideo signal,switchable between NTSC and PAL
USB port
AA-sized alkaline battery x 4 or AA-sized Ni-MH battery x 4(AA-sized lithium
battery is not available.)
Dimensions Weight
Dimensions(WxHxD): 4.57x2.95x2.44 inches (11.6x7.5x6.2 cm)(not including the projecting parts)
Weight: Approx.270.5g(9.54 oz.)(without batteries and the CF card)
Specifications are based on the latest information available at the time of printing and are subject to
change without notice.
173
Download from Www.Somanuals.com. All Manuals Search And Download.
(c) 2003 Gateway, Inc. All rights reserved. Gateway, Gateway Country, the Gateway stylized logo, and
the black-and-white spot design are trademarks or registered trademarks of Gateway, Inc. in the
United States and other countries. All other brands and product names are trademarks or registered
trademarks of their respective companies.
174
Download from Www.Somanuals.com. All Manuals Search And Download.
|