Fujitsu Flat Panel Television PDS4233W User Manual

USER’S MANUAL

42” WIDE PLASMA DISPLAY

PDS4233W/ PDS4234W

Contents

Page

Before Use

Adjustm ents

• Safety Precautions ·········································· 2–3

• Features ······························································· 4

• Accessories ·························································· 5

• Handy Tips ··························································· 5

• Installation ··························································· 6

• Adjusting Pictures (PICTURE Menu)·········· 24–25

• Adjusting Screen Position and Size

(POSITION/SIZE Menu) ······························· 26–27

• Adjusting Audio (AUDIO Menu) ················· 28–29

• Other Adjustm ents (FEATURES Menu) ····· 30–38

• Initialization of user adjustm ent value

Usage

• Part Nam es and Functions ··························· 7–10

• Using the Rem ote Control ································ 11

• Connecting the Display to External

Equipm ent ··················································· 12–13

• Basic Operations ··············································· 14

• Selecting Input Mode ········································ 15

• Watching Pictures on the Wide Screen ······ 16–17

• How to Use Menus ······································ 18–23

(FACTORY DEFAULT) ········································ 39

Others

• Options ······························································· 40

• Factory Settings ················································· 41

• Specification ······················································ 42

• Cleaning and Maintenance ······························· 44

Before using the display, read this m anual carefully so that you know how to use the display correctly.

Refer to this m anual whenever questions or problem s about operation arise. Be sure to read and observe the

safety precautions.

Keep this m anual where the user can see it easily.

* Installation and rem oval require special expertise. Consult your product dealer for details.

Download from Www.Somanuals.com. All Manuals Search And Download.

DECLARATION OF CONFORMITY

according to EN45014

Fujitsu General (U.K.) Co. Limited

Unit 150, Centennial Park, Centennial Avenue Elstree, Hertfordshire, WD6 3SG

Manufacturer: Shinjyo Fujitsu General Limited

702-3 Kanazawa Shinjyo-shi

Yamagata Japan

declares under our sole responsibility that the product,

Type:

42” PLASMA DISPLAY

Model Name: PDS4234W

to which this declaration relates are in conformity with the following standards;

European Standards:

EMC: a. EN55022 1994/A1:1995/A2:1997/A3:1998 Class B

b. EN61000-3-2 1995

c. EN61000-3-3 1995

d. EN55024 1998

(EN61000-4-2 1995 / EN61000-4-3 1996)

(EN61000-4-4 1995 / EN61000-4-5 1995 / EN61000-4-6 1996)

(EN61000-4-8 1993 / EN61000-4-11 1994)

Safety: e. EN60950 1992/A1:1993/A2:1993/A3:1995/A4:1997

By conformance with the standard referenced, the product follows

the provisions of the directives listed below.

a. EC Council Directive 89/336/EEC of 3rd, May 1989

b. EC Council Directive 92/31/EEC of 28th, April 1992

c. EC Council Directive 93/68/EEC of 22nd, July 1993

d. EC Council Directive 73/23/EEC of 19th, February 1973

Place of Issue: United Kingdom

Date of Issue: Oct. 2001

Signature:

H. Hirosaki, Chief Exective Officer

Fujitsu General (U.K) Co. Limited

Declaration reference: Fujitsu General (U.K) Co. Limited

Unit 150, Centennial Park, Centennial Avenue Elstree,

Hertfordshire, WD6 3SG, United Kingdom

Tel: + 44-(0)20-8731-3450

Fax:+ 44-(0)20-8731-3451

Download from Www.Somanuals.com. All Manuals Search And Download.

SAFETY PRECAUTIONS

FCC NOTICE

• PDS4233W: A Class A digital device

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be required to correct the interference at his own expense.

• PDS4234W: A Class B digital device

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

–

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

IMPORTANT INFORMATION

WARNING: This is a Class A and Class B product. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS

PRODUCT TO RAIN OR MOISTURE.

IMPORTANT SAFEGUARDS

Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. But

IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order not to defeat the safeguards

incorporated into this product, observe the following basic rules for its installation, use and service. Please read these “Important

Safeguards” carefully before use.

–

All the safety and operating instructions should be read before the product is operated.

The safety and operating instructions should be retained for future reference.

All warnings on the product and in the operating instructions should be adhered to.

All operating instructions should be followed.

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

Do not use attachments not recommended by the product manufacturer as they may cause hazards.

Do not use this product near water. Do not use immediately after moving from a low temperature to high temperature, as this causes

condensation, which may result in fire, electric shock, or other hazards.

–

The apparatus shall not be exposed to dripping or splashing.

No objects filled with liquids, such as vases, shall be placed on the apparatus.

Download from Www.Somanuals.com. All Manuals Search And Download.

–

Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a child or

adult, and serious damage to the product. The product should be mounted according to the manufacturer’s instructions,

and should use a mount recommended by the manufacturer.

When the product is used on a cart, care should be taken to avoid quick stops, excessive force, and uneven surfaces

which may cause the product and cart to overturn, damaging equipment or causing possible injury to the operator.

–

Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation of the product and protect it from

overheating. These openings must not be blocked or covered. (The openings should never be blocked by placing the product on bed,

sofa, rug, or other similar surface. It should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is

provided and the manufacturer’s instructions have been adhered to.)

For proper ventilation, separate the product from other equipment, which may prevent ventilation, and keep distance more than 10 cm.

–

This product should be operated only from the type of power source indicated on the label. If you are not sure of the type of power

supply of your home, consult your product dealer or local power company.

This product is equipped with a three-wire plug. This plug will fit only into a grounded power outlet. If you are unable to insert the plug

into the outlet, contact your electrician to install the proper outlet. Do not defeat the safety purpose of the grounded plug.

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay

particular attention to cords at doors, plugs, receptacles, and the point where they exit from the product.

For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it

from the wall outlet and disconnect the cable system. This will prevent damage to the product due to lightning and power line surges.

Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a risk of fire or electric

shock.

Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that

could result in a fire or electric shock. Never spill liquid of any kind on the product.

Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltages and other hazards.

Refer all service to qualified service personnel.

Unplug this product from the wall outlet and refer service to qualified service personnel under the following conditions:

a) When the power supply cord or plug is damaged.

b) If liquid has been spilled, or objects have fallen on the product.

c) If the product has been exposed to rain or water.

d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the

Operation Manual, as an improper adjustment of other controls may result in damage and will often require extensive work by a

qualified technician to restore the product to its normal operation.

e) If the product has been dropped or damaged in any way.

f) When the product exhibits a distinct change in performance—this indicates a need for service.

–

When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or with

same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the

product is in proper operating condition.

The product should be placed more than one foot away from heat sources such as radiators, heat registers, stoves, and other products

(including amplifiers) that produce heat.

When connecting other products such as VCR’s, and personal computers, you should turn off the power of this product for protection

against electric shock.

Do not place combustibles behind the cooling fan. For example, cloth, paper, matches, aerosol cans or gas lighters that present special

hazards when overheated.

Use only the accessory cord designed for this product to prevent shock.

The power supply voltage rating of this product is AC100–240 V, and the power cord attached conforms to the following power supply

voltage. Use only the power cord designated by our dealer to ensure Safety and EMC.

When it is used with other power supply voltage, the power cable must be changed.

Power cord

Use the standard power plug and cord set of the specified country.

Consult your product dealer.

Power supply voltage:

AC 100–125 V

(Included)

AC 200–240 V

(Not included)

AC 240 V (SAATYPE)

(Not included)

Download from Www.Somanuals.com. All Manuals Search And Download.

FEATURES

This display uses a plasma display panel and is only 8.5 cm deep. With its high picture quality and performance, it is perfectly suited for

multimedia applications.

Variety of input signals

• In addition to video, S-video, and RGB, signals, this display supports input of high-quality video signals such as DVD and HDTV.

• The display has an RGB input terminal to receive digital RGB signal of DVI standard to display a high definition picture quality in

addition to mD-sub terminal and BNC terminal.

• Depending on the model, the display supports video input for different color television systems as follows: NTSC, PAL, SECAM,

PAL60, N-PAL, M-PAL, 4.43NTSC.

• The display has a component video input terminal to receive signals from the DVD player and HDTV equipment as well as digital

broadcasting signals (color difference signals).

• The display has an RGB input terminal to receive signals, including VGA, SVGA, XGA and SXGA^*1.

5 screen sizes (Video input m ode) and 3 screen sizes (RGB input m ode)

• This display offers a total of five different screen sizes in video input mode: Normal, Wide1, Wide2, Zoom1, and Zoom2.

A Normal mode is also available for displaying of normal-size (4:3 aspect ratio) pictures.

• The display has an Auto mode to switch screen size automatically depending on the contents of software.

• Three different screen sizes in RGB input mode (Normal, Wide, and Zoom) are also available.

Vertical installation

• The display can be installed vertically, enabling advertisement to be displayed. In this case, you can set up the display so that on-screen

information, such as input modes and menus, is displayed properly.

Power m anagem ent function

• The display features a DPMS (Display Power Management Signaling) function that ensures automatic power saving capability.

Flexible as part of a system

• You can operate the display by remote control using the RS-232C interface.

• If you have two or more displays, you can assign a unique number to each of them so that you can select which one you want to use.

• Input Priority function for selecting automatic switching to desired mode is provided to avoid troublesome operation.

• Main unit key lock function can prevent mischief and malfunction.

Others

• Troublesome adjustment of clock phase can be avoided by automatic clock phase adjustment function (Automatic Clock Phase

function).

• You can specify the color temperature.

• The white screen and screen orbiter functions are available to minimize phosphor burn-in.

• 2 audio input terminals and 9W + 9W external speaker output terminal are available.

• A clear picture can be obtained by digital noise reduction function.

• A display suitable for such film materials as movie pictures can be made by 24 frame mode function.

*1 The refresh rate of 60, 72, 75 and 85 Hz for SVGA (800 x 600) and those of 60, 70, 75 Hz for XGA (1024 x 768) and those of 60, 75

Hz for SXGA (1280 x 1024) are supported.

Note that the SVGA, XGA and SXGA pictures will be compressed when displayed on the screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

ACCESSORIES

CHECKING ACCESSORIES

One rem ote control

Two AA batteries

One user’s m anual

One power cable

Two ferrite cores

Manual

HANDYTIPS

• Pictures may become “burnt” into the screen phosphors if the screen is left on for extended periods. To ensure that the display has a

prolonged service life, be sure to use a screen orbiter, white screen. This will ensure the same picture or pattern is not constantly

displayed for long periods. (See P. 35-37.)

• The plasma display panel, which is built for maximum precision, provides more than 99.99% effective pixels. You may find, however,

that some pixels constantly remain lit or dimmed.

• The display has a fan to prevent its internal temperature from rising.

• Be careful with the air delivered by the fan. It may be very hot.

• Contact your dealer if you find that the display does not seem to function properly when used with other audio-visual equipment.

You may need to move your display if it produces degraded pictures or noise due to electromagnetic radiation, or if the infrared remote

control does not function properly.

• Pictures may not be displayed properly if you connect a non-standard PC to the RGB input terminal. In this case, contact your dealer

for more information.

• The protective circuit, built into the display, automatically turns off the power if the display has a problem. In this case, you will see

that the power indicator lamp flashes red.

Warning

If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the

power plug from the receptacle to prevent fire or electric shock. Then, check the display in accordance with the instructions given on

P. 44, or contact your dealer.

• Viewing the screen constantly for extended periods can strain your eyes. Be sure to stay at a proper distance (at least 1.5 m or 5 feet)

from the screen and to look occasionally away while working.

• Have the display inspected and cleaned by your dealer at regular intervals.

Inform ation

Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these products.

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION

To prevent the display’s internal components from overheating, make sure that the display is installed in a well-ventilated location.

Be sure to use the optional stand, wall-mounting unit or the other unit when installing the display. Also, be also sure that your dealer

performs the installation.

See the appropriate instruction manual for more information on the installation hardware you select.

To prevent an accident and ensure safety in the event of an earthquake, fix the display securely into position as described below.

To ensure proper heat radiation, provide at least as much space around the display as shown below.

* Make sure that the display is installed in a location where the temperature can be maintained between 0°C and 40°C.

* Never attempt to tilt the display sideways or backward.

* To prevent the power and other cables from being accidentally pulled, make sure that they run along the wall or through corners.

* The display can be installed with either of its sides facing down.

When using the stand

Front

Side

(cm)

Upper

1.5

Wall

Right

Left

Floor

Stand

When using the wall-m ounting unit (horizontal type)

When using the wall-m ounting unit (vertical type)

Front

Side

Front

Side

Upper

(cm)

Wall m ounting unit

Upper

Wall m ounting unit

Left

Right

Wall

Lower

1.5

Lower

1.5

* When installing the display vertically, be sure to rotate

the text.(Refer to OSD Rotate. See P.32) and setup

vertical installation. (Refer to Installation. See P.38)

Note

The display is a highly precise piece of equipment and therefore must be packed properly before transportation. Be sure to use only those packing

materials originally supplied with the display when repacking it.

Reference

See P. 40 for more information on options.

Download from Www.Somanuals.com. All Manuals Search And Download.

PART NAMES AND FUNCTIONS

Front

1 Power indicator lam p

This lamp shows the state of the power supply.

Lit (red):

Stand-by

Lit (green):

Power ON

Lit (orange): Power saving (DPMS: Power saving

function) mode ON

Flashing (red): Malfunction (Flashes differently depending

on the type of malfunction. See P. 44 for

more information.)

2 Rem ote control signal receiver

Receives signals from the remote control.

3 Main power sw itch

When pressed, power indicator lamp 1 lights red, and the

power can be turned on or off by the remote controller.

When this switch is pressed again, the power is cut and power

indicator lamp 1 goes off.

Control Panel (bottom )

4 Power button [POWER]

Turns the power ON or OFF.

5 Input m ode selector button [MODE]

Switches between picture input modes.

6 Wide screen selector button [WIDE]

Switches the screen over to a desired wide screen.

7 Menu button [MENU]

Displays picture adjustment menus.

8 Adjustm ent buttons [

]

Adjust the volume.

The [

] buttons can also be used to scroll through the

options when a menu is displayed.

9 Adjustm ent buttons [

]

The [ ] buttons can also be used to scroll through options

in a menu, or to change values.

0 Enter button [ENTER]

Press this button to finalize the selection of a desired option in

a menu.

Warning

If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the

power plug from the receptacle and contact your dealer. Leaving the display power ON can result in fire or electric shock.

Download from Www.Somanuals.com. All Manuals Search And Download.

PART NAMES AND FUNCTIONS (Continued)

Bottom

1 External speaker output term inal (EXT SP)

Connect this terminal to the optionally available speaker. (Use a speaker with 4 to 16 Ω.)

*See the speaker instruction manual for more information.

2 Sound 1 input term inal (AUDIO 1 INPUT)

Connect this terminal to the sound output terminal of your VCR, etc.

3 Sound 2 input term inal (AUDIO 2 INPUT)

Connect this terminal to the sound output terminal of your VCR, etc.

4 Video input term inal (VIDEO INPUT)

Connect this terminal to the video output terminal of your VCR or video disk player.

5 S-video input term inal (S-VIDEO INPUT)

Connect this terminal to the S-video output terminal of your VCR or video disk player.

6 RS-232C term inal (RS-232C)

This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC.

When connecting a cable, attach a ferrite core to the cable. (See P. 12.)

7 RGB 1 input term inal (RGB 1 INPUT/ DVI-D)

Connect this terminal to the PC’s display (digital RGB) output terminal.

*The connection cable No.88741-8000 made by molex Inc. is recommanded.

8 RGB 2 input term inal (RGB 2 INPUT/ m D-sub)

Connect this terminal to the PC’s display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal.

9 RGB 3 synchronization sw itch (SYNC SW TTL/ ANALOG (75 Ω))

This switch is used to terminate horizontal (H) terminal and vertical (V) terminal, out of RGB3 input terminals, with 75 Ω .

TTL

: Used when sending RGB signals from the PC to the RGB 3 terminal

ANALOG (75 Ω): Used when sending analog synchronization signals to the RGB 3 terminal

0+A RGB 3 input term inal (RGB 3 INPUT/ BNC)

Connect this terminal to the PC's display (analog RGB) output terminal or decoder (digital broadcast tuner,etc.) output terminal.

*When RGB3 input terminal is connected, Comp.video mode is not available. (See P. 33.)

A Com ponent video input term inal (COMPONENTVIDEO INPUT)

Connect this terminal to the component video output (color difference output) terminal of your HDTV unit or DVD player.

*When Comp.video input terminal is connected, RGB3 mode is not available. (See P. 33.)

B Power input term inal

Connect this terminal to the power cable supplied with the display.

When connecting a cable,attach a ferrite core to the cable. (See P.12)

Download from Www.Somanuals.com. All Manuals Search And Download.

Description of Input Term inals

DVI-D term inal (RGB 1 INPUT/DVI-D)

RGB2 input term inal (RGB2 INPUT/m D-sub)

Pin No. Input signal Pin No.

Input signal

Red

—

Green

Blue

Ground

—

Ground

Horizontal synchronization

Vertical synchronization

—

Fram e

Ground

RS-232C term inal (RS-232C)

Pin No.

Signal

DCD (Data Carrier Detect)

RD (Received Data)

TD (Transm it Data)

DTR (Data Term inal ready)

GND (Ground)

DSR (Data Set Ready)

RTS (Request To send)

CTS (ClearTo Send)

RI (Ring Indication)

Download from Www.Somanuals.com. All Manuals Search And Download.

PART NAMES AND FUNCTIONS (Continued)

Rem ote Control

1 Power ON button [POWER ON]

Turns the power ON.

➝ (See P. 14.)

➝ (See P. 15.)

➝ (See P. 16–17.)

➝ (See P. 18–39.)

➝ (See P. 14.)

2 Power OFF button [POWER OFF]

Turns the power OFF.

3 RGB input m ode selector button [RGB]

Switches between RGB input modes.

4 Video input m ode selector button [VIDEO]

Switches between video input modes.

5 Wide screen selector button [WIDE]

Switches the screen over to a desired wide screen.

6 Menu button [MENU]

Use this button to display a desired menu for adjusting the picture.

7 Volum e adjustm ent buttons [VOL +/ -]

Adjust the volume.

Press the + button to increase the volume.

Press the - button to reduce the volume.

8 Adjustm ent buttons [

]

➝ (See P. 18–39.)

Use these buttons to scroll through options in a menu and change values.

9 Enter button [ENTER]

➝ (See P. 18–39.)

Press this button to finalize the selection of a desired menu or option within a menu.

0 Display selector buttons [SHIFT 1–4]

➝ (See P. 36 .)

When you use two or more displays, you can use these buttons to control up to four displays

by assigning a unique number to each display.

PUTTING BATTERIES IN THE REMOTE CONTROL

1 To remove the cover, slide it

2 Place two AA batteries in the

remote control. Make sure that the

batteries are properly oriented.

3 Close the cover until it snaps into

outwards while pressing it down.

place.

CAUTION: Be sure to use replacement batteries of the same type as the original ones.

When disposing of used batteries, please comply with governmental regulations or environmental

public institution’s rules that apply in your country/area.

Note

The remote control will not function properly if the batteries are dead. Be sure to replace them as needed.

Download from Www.Somanuals.com. All Manuals Search And Download.

USING THE REMOTE CONTROL

PRECAUTIONS

To prevent malfunction, be sure not to apply any form of severe shock to the remote control.

To prevent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it away from hot locations or

heating equipment.

Be sure not to clean the remote control using a cloth dampened in any volatile solvent, such as benzene or thinner.

EFFECTIVE RANGE FORTHE REMOTE CONTROL

Point the remote control at the display’s signal receiver when using it.

Make sure that there are no obstacles between the remote control and the display’s signal receiver.

Upper

20°

Lower

30°

Left

Right

5 m (Front)

Inform ation

The remote control may not function properly if you use a high-frequency fluorescent lamp. If you experience problems, move the lamp or use the

remote control from a different position.

Download from Www.Somanuals.com. All Manuals Search And Download.

CONNECTING THE DISPLAYTO EXTERNAL EQUIPMENT

Be sure to turn OFF the power to the display and external equipment before making any connections.

No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PC

model. Contact your dealer for more information.

RECEPTACLE

Make sure that the power cable’s grounding wire is grounded.

The display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, you

will need to have it replaced. Contact your dealer for more information.

CONNECTING THE DISPLAYTO EXTERNAL EQUIPMENT

Carefully check the terminals for position and type before making any connections.

Loose connectors can result in picture or color problems. Make sure that all connectors are securely inserted into their terminals.

Term inal

Connector

VIDEO INPUT

S-VIDEO INPUT

COMPONENT VIDEO INPUT

RGB INPUT

BNC

S terminal

BNC x 3

mD-sub 15-pin , BNC x 5 , DVI-D

Pin jack

AUDIO INPUT

RS-232C

D-sub 9-pin

Ferrite cores

These ferrite cores are used to attenuate undesired signals.

Two ferrite cores

When connecting a cable to the power input terminal, RS-232C terminal, attach one of these ferrite cores to the cable near the terminal.

Ferrite core

Download from Www.Somanuals.com. All Manuals Search And Download.

POWER

INPUT

COMPONENT

VIDEO INPUT

(color difference

input) /

RGB2

INPUT

(m D-sub) (DVI-D)

RGB1

INPUT

S-VIDEO

INPUT

VIDEO

INPUT

AUDIO2

INPUT

AUDIO1

INPUT

RS-232C

RGB3 INPUT

To receptacle To color difference

output term inal /

To display

(analog RGB) (digital RGB)

output

term inal

To display

To RS-232C To S-video To video

To sound To sound

output output

term inal term inal

output

To display (analog RGB)

output term inal

output

term inal

term inal term inal

Connection to AV equipm ent

Connection to PC

Download from Www.Somanuals.com. All Manuals Search And Download.

BASIC OPERATIONS

TURNING ON THE POWER

Press the m ain pow er sw itch at

the bottom of the display.

When you do so, the main power turns ON.

Press

on the rem ote

control.

When you do so, the power indicator lamp turns

green.

Press

to select a

desired input m ode.

* You can also use the

switches on the display’s

control panel to accomplish

these steps.

TURNING OFF THE POWER

Press

w hen the power is ON.

The power indicator lamp turns red.

ADJ USTING THE VOLUME

Press

to increase the volume.

to reduce the volume.

Any value between 0 and 40 can be selected.

* “No Audio” appears if you press or

after you have

selected “No Audio” for “Audio Input”. (See P. 35.)

When the volum e adjustm ent button is pressed

* Note that the volume level remains stored even when you

turn OFF the power.

* As Audio Input is set at "No Audio" in the factory settings,

the sound volume cannot be adjusted.

Download from Www.Somanuals.com. All Manuals Search And Download.

SELECTING INPUT MODE

VIDEO INPUT MODE

Press

to select a desired input

m ode.

Each time you press , a different input mode

appears. The sequence is as follows:

Video:

Displays pictures from equipment

connected to the Video terminal.

S-video m ode

S-video:

Displays pictures from equipment

connected to the S-video terminal.

Comp.video: Displays pictures from equipment

connected to the component video

input terminal.

* You can switch between video input modes

while you are in RGB input mode.

* When Comp.video input terminal is connected,

RGB3 mode is not available.

Setting is made in BNC Input mode.(See P.33.)

Com p.video m ode

* You can also use the

switches on the display’s

control panel to accomplish

these steps.

RGB INPUT MODE

Press

to select a desired input

m ode.

Each time you press

appears. The sequence is as follows:

, a different input mode

RGB1:Displays pictures from equipment

connected to the RGB1 (DVI-D) terminal.

RGB1 m ode

RGB2:Displays pictures from equipment

connected to the RGB2 (mD-sub) terminal.

RGB3:Displays pictures from equipment

connected to the RGB3 (BNC x5) terminal.

* You can switch between RGB input modes

while you are in a video input mode.

* When RGB3 input terminal is connected,

Comp.video mode is not available.

Setting is made in BNC Input mode.(See P.33.)

RGB2 m ode

* You can also use the

switches on the display’s

control panel to accomplish

these steps.

Download from Www.Somanuals.com. All Manuals Search And Download.

WATCHING PICTURES ON THE WIDE SCREEN

SWITCHING BETWEEN SCREEN SIZES

Press

The currently selected mode will appear.

Press

to select a desired

picture m ode.

Norm al m ode

Each time you press , a different picture mode

appears. The sequences used are as follows:

When you are in a Video or S-video input m ode

When you are in a Com p.video input m ode

When you are in an RGB input m ode

Wide1 m ode

* You can also use the

switches on the display’s

control panel to accomplish

these steps.

* Depending on the type of signal, some aspects

may not be selected.

Note

• Displaying a picture in a Normal mode for extended periods of time may cause phosphor burn-in.

• A variety of picture modes are available with this display. Remember that if you select a mode with an aspect ratio (ratio of frame width to frame

height) different from that of the TV program or video media, the pictures will appear differently than if you had selected a mode having the same

aspect ratio.

• Showing a movie or similar premium event at a different aspect ratio from its original one at any event site, restaurant, or bar for profit-making

purposes or for a public audience may constitute a copyright infringement.

For films, try to select a mode having the same aspect ratio as the original picture; this enables the director’s original intentions to be preserved.

Reference

See P. 26–27 for how to adjust the picture size and position.

Download from Www.Somanuals.com. All Manuals Search And Download.

SCREEN SIZE

Norm al

Displays pictures of normal size (i.e., a 4:3 aspect ratio).

Auto

The screen size changes automatically in accordance with the contents of image software

you use.

Wide1

Displays natural-looking pictures of standard size on the wide screen.

Picture of

standard size

Wide1

Wide2

Zoom 1

Wide2/ Wide

Ideal for displaying vertically extended pictures such as squeezed pictures and recorded

HDTV programs.

Vertically

extended picture

Zoom 1/ Zoom

Enlarges horizontally extended pictures equally in all directions to maintain the aspect

ratio constant.

Horizontally

extended picture

Zoom 2

Reduces the height of horizontally extended pictures with captions, without eliminating

the caption. Only the height of pictures is reduced, not the height of the caption.

Horizontally extended

picture with caption

Zoom 2

(Captions may not be easy to read, however, depending on the picture.)

ASPECT RATIO

The following aspect ratios are available.

4:3 aspect ratio

16:9 aspect ratio

(VHF/UHF broadcasting, BS broadcasting)

(HDTV broadcasting)

1.85:1 aspect ratio

(Vista Vision size)

2.35:1 aspect ratio

(Cinema Vision size)

Inform ation

You may find dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the Vista Vision or Cinema

Vision size i.e., the sizes used frequently for picture software.

Download from Www.Somanuals.com. All Manuals Search And Download.

HOW TO USE MENUS

SELECTING OPTIONS IN A MENU

Use the [MODE] button on the display or

and

on the remote control to select a desired input mode.

Press

The main menu screen will appear.

Press

to sw itch between sub-m enus.

Ex.: “PICTURE” selected in the m ain m enu

screen

Each time you press or , one of the available menus appears.

The corresponding menu screen will appear.

Press

to select an option for adjustm ent/ setup.

A total of five different menus (PICTURE, POSITION/SIZE, AUDIO, FEATURES, FACTORY DEFAULT) are available.

You can easily distinguish between these menus as shown below.

PICTURE

POSITION/SIZE

AUDIO

FEATURES

FACTORY DEFAULT

*Press

to make adjustment/setup, and press

to store.

* Do not change input signals when any of the menus are displayed.

* Audio Input menu will not be displayed when "No Audio" is selected. (See P. 35.)

USING THE PICTURE MENU

When you finish selecting a desired option in the PICTURE menu screen, press

At this time, the adjustment/setup screen for that option will appear.

You can use or to change the value for the option. Press

Changes you make will be stored only for the selected mode.

to store. (See P. 24–25.)

PICTURE Menu screen (Video Input Mode)

PICTURE Menu screen (RGB Input Mode)

Download from Www.Somanuals.com. All Manuals Search And Download.

Option

Function

Operation

Range

(1) Contrast

Adjusts picture contrast.

: Higher contrast

: Lower contrast

-30 to +30

(2) Brightness

(3) Color

Adjusts screen brightness.

Adjusts color darkness.

Adjusts tint.

: Brighter screen

: Darker screen

-60 to +60

: Darker colors

: Lighter colors

(4) Tint

: More greenish colors

: More purplish colors

Video, S-video: -30 to +30

Comp.video, RGB-PC,

Decoder

: -60 to +60

(5) Sharpness

Adjusts picture sharpness.

: Sharper pictures

: Less sharp pictures

Video, S-video, Comp.video,

Decoder : -16 to +16

RGB-PC : -4 to +4

(6) Picture Mode

Can set up the picture mode. Use or for switching.

Dynamic/Fine/Real1/Real2/

Static

(7) Color Temp.

Adjusts color temperature.

Use or for switching.

Press or to select Red,

Green or Blue and press or

Warm/Standard/Cool/User

(8) User Color Temp.

Can set up when User is

selected in Color Temp.

0 to 255 for each of Red,

Green and Blue

to make adjustment.

Use or for switching.

(9) Noise Reduction

Sets up noise reduction.

Off/Min./Std./Max.

(for Video, S-video, Comp.video)

USING THE POSITION/ SIZE MENU

When you finish selecting a desired option in the POSITION/SIZE menu screen, press

When you do so, the adjustment screen for that option appears.

Press

to select option and press or to make adjustment. Press

to store. (See P. 26–27.)

Changes you make will be stored only for the selected mode.

*You cannot adjust screen size in RGB1 (DVI-D) mode.

POSITION/SIZE Menu screen

“Position” adjustm ent screen

Option

Function

Operation

Range

Video, S-video

(1) Position

Horizontal

Adjusts screen position.

Adjusts horizontal position.

Horizontal: -30 to +30

Vertical Zoom: -15 to +15

Others:-7 to +7

: Moves screen to the right.

: Moves screen to the left.

Comp.video: -16 to +16

1080I,720P: -32 to +32

RGB-PC: -150 to + 150

Decoder: -16 to + 16

1080I,720P: -32 to +32

Vertical

Adjusts vertical position.

: Moves screen up.

: Moves screen down.

(2) Size

Width

Adjusts screen size.

Adjusts width.

Video, S-video: -7 to +7

Comp.video: -4 to +4

RGB-PC: -25 to +50

Decoder: -4 to +4

: Increases width.

: Reduces width.

Height

Adjusts height.

: Increases height.

: Reduces height.

Download from Www.Somanuals.com. All Manuals Search And Download.

HOW TO USE MENUS (Continued)

USING THE AUDIO MENU

When you finish selecting a desired option in the AUDIO menu screen, press

When you do so, the adjustment screen for that option appears.

Press

to select option and press or to make adjustment. Press

to store. (See P. 28–29.)

The adjustments you make will be stored for each audio input terminal.

*Audio Input menu will not be displayed when "No Audio" is selected. (See P. 35.)

AUDIO Menu screen

Option

Function

Operation

Range

(1) Treble

Adjusts treble.

: Stronger treble

: Weaker treble

-6 to +6

(2) Bass

Adjusts bass.

: Stronger bass

: Weaker bass

-6 to +6

(3) Balance

Adjusts volume balance.

:Higher volume from right-

hand speaker

-10 to +10

:Higher volume from left-

hand speaker

USING THE FEATURES MENUS

• FEATURES setup screen has 5 options of Adjustm ent, Function, On Screen Menu, Input Term inal and

Others.

• Options w ith “ ” on the right

When you select an option with “ ”, press

. The adjustment/setup screen for that option appears.(See P. 30–38.)

You can use or on this screen to make selections or changes.Press

to store.

• Options w ith no “ ” on the right

When you select an option with no “ ”, press or to make selections or changes. Press

to store. (See P. 30–38.)

FEATURES Menu

FEATURES Menu screen (Com p.video Input Mode) Adjustm ent Menu screen

Function Menu screen

Download from Www.Somanuals.com. All Manuals Search And Download.

On Screen Menu screen

Others(1/2) Menu screen

Input Term inal Menu screen

Adjustm ent Menu (See P. 30-31.)

Option

Function

Operation

Eliminates blur when the

Range

(1) Dot Clock

(for RGB2, RGB3)

Adjusts the dot clock.

Adjusts clock phase.

-60 to +60

optimum value is selected with

(2) Clock Phase

Eliminates blur when the

Auto/Manual

(for RGB2, RGB3)

optimum value is selected with

(Can adjust 1 to 32 for

Manual)

(3) Vertical Sync

(for RGB2, RGB3)

Corrects vertical

synchronization signal.

Use or to select the

optimum value for eliminating

flicker.

-1 to +1

-8 to 8

(4) Clamp Position

Adjusts clamp pulse phase.

Use or for switching.

(for Comp.video, RGB2, RGB3)

(5)Auto Calibration

(for RGB2, RGB3)

Selects the optimum

dynamic range of images.

Select Execute and use

to select an option.

Execute

Yes/No

Function Menu(See P. 30,32.)

Option

Function

Operation

Range

(1) 24 Frame Mode

(for Video, S-video, Comp.video) pictures.

Displays the optimum movie Use or for switching.

On (Movie) /

Off (Normal)

(2) 3D Y/C

(for Video(3.58NTSC))

Selects whether to enable

the 3D Y/C circuit.

Use or for switching.

On (3D Y/C circuit) /

Off (3-line)

On Screen Menu(See P. 30,32)

Option

Function

Operation

Range

(1) OSD

Selects whether to display

information other than

menus.

Use or for switching.

On (displayed) /

Off (not displayed)

(2) OSD Rotate

(3) Language

Rotates on-screen text.

Use or for switching.

-90 Deg. (counterclockwise)/

Normal/

+90 Deg. (clockwise)

Selects language used for

menus.

Display the “Language”

selection screen and use

to select a language.

English

Deutsch (German)

Español (Spanish)

Français (French)

Italiano (Italian)

Português (Portuguese)

Download from Www.Somanuals.com. All Manuals Search And Download.

HOW TO USE MENUS (Continued)

Input Term inal Menu(See P. 30,33–34.)

Option

Function

Operation

Range

(1) Video Input

(for Video)

Selects video mode.

Use or for switching.

Auto/NTSC/PAL/SECAM/

PAL60/N-PAL/M-PAL/

4.43NTSC

(2) S-video Input

(for S-video)

Selects video mode.

Use or for switching.

Display BNC Input screen

Auto/NTSC/PAL/SECAM/

PAL60/N-PAL/M-PAL/

4.43NTSC

(3) BNC Input

Selects BNC Input signal.

Function

and press

option.

Use or for switching.

Select Comp.video or Decoder

by Function to set up Mask.

to select an

Comp.video/RGB-PC/

Decoder

Mask

Off/5/10/15 (dot)

(4) D-SUB Input

Selects D-SUB Input signal. Display D-SUB Input screen

Function

and press

option.

Use or for switching.

Select Decoder by Function to

set up Mask.

to select an

RGB-PC/Decoder

Mask

Off/5/10/15 (dot)

Others Menu(See P. 30,34–38.)

Others Menu screen is divided into the following two screens.

Others(1/2) Menu screen

Others(2/2) Menu screen

Option

Function

Operation

Range

(1) DPMS

Specifies time before

DPMS starts.

Can specify the background Use or for switching.

color when specifying time. Can specify background by

setting time to other than Off.

Display DPMS screen and press Time

to select an option.

Off (disabled)/1 min./

15 min./45 min./60 min.

Background

Black/White

(2) Audio Input

Selects audio input terminal. Display the “Audio Input”

adjustment screen and use

No Audio/Audio 1/Audio 2

to select an option.

Use or to switch between

available choices for the

selected option.

(3) Screen Orbiter

(for RGB)

Sets up screen orbiter.

Display the “Screen Orbiter”

adjustment screen and use

to select an option.

Mode/Time

Off (disabled)

Time (every 1 hr)

Mode (every time mode is

switched)

Use or to switch between

available choices for the

selected option.

Moving area

Min.(moves in small range)

Std.(moves in moderate

range)

Max. (moves in wide range)

Download from Www.Somanuals.com. All Manuals Search And Download.

Option

Function

Operation

Range

(4) Input Priority

Specifies input mode of

highest priority.

Use or for switching.

Off/RGB2/RGB3/Video/

S-video/Comp.video

(5) Monitor No.

Selects display number.

Use or for switching.

0 (no setup)

1/2/3/4

(6) Direct Setting

(for RGB)

Selects input signal.

RGB1:

Auto/VGA/WVGA/XGA/

WXGA

RGB2, RGB3:

Auto/VGA/WVGA/480P/

XGA/WXGA/SXGA/

SXGA⁺

(7) Code Setting

(for RGB2, RGB3)

Specifies and displays type

of input signal directly.

Display Code Setting screen

Auto/Manual

and press

to select an

option.

Select Manual to set up

Parameter.

(8) White Screen

(9) Exhibition Mode

(10) Installation

(11) Key Lock

Sets up to display white

over the entire screen.

Use or for switching.

On /Off(disabled)

Sets up Exhibition mode.

On (Exhibition mode)/

Off(disabled)

Sets up whether horizontal

or vertical installation.

Horizontal/Vertical

Locks the main unit button.

On (Key Lock)/

Off(disabled)

(12) Information

Displays system operation

status.

Display the “Information”

screen.

Display only

USING THE FACTORY DEFAULT MENU

• Select FACTORY DEFAULT and execute to restore the adjustm ent/ setting m ade in the MENU to factory

settings. (See P. 39.)

FACTORY DEFAULT Menu screen

Yes/No selection screen

Option

Function

Operation

Range

FACTORY DEFAULT

Restores the adjustment/

setting made in the MENU

to factory settings.

Select Execute and use

to select an option.

Yes/No

Download from Www.Somanuals.com. All Manuals Search And Download.

ADJ USTING PICTURES (PICTURE MENU)

BASIC OPERATIONS [EX.: ADJ USTING TINT (Tint)]

You can make changes to all picture adjustment options in the PICTURE Menu.

The changes you make will be stored for a selected input mode. Therefore, you need to select a desired input mode before making any

changes.

Press

The main menu screen will appear.

Press

to select “PICTURE”.

“PICTURE” selected in the m ain m enu

screen

Each time you press or , one of the available

menus appears in the following sequence:

PICTURE

POSITION/SIZE

AUDIO

FEATURES

FACTORY DEFAULT

The PICTURE Menu screen will appear.

Press

to select “Tint”.

* You can also use the

switches on the display’s

control panel to accomplish

these steps.

The “Tint” adjustment screen will appear.

“Tint” selected in the PICTURE Menu

screen (Video Input Mode)

Press

values.

to change tint

: More greenish colors

: More purplish colors

“Tint” adjustm ent screen

Press

to store.

Press

w hen you finish.

* Repeat steps 3, 4, 5, and 6 when you wish to

make changes to other options.

* On-screen information disappears if you do not take any action for about 60 seconds.

* The following abbreviations used in this document represent input modes in which you can make adjustments:

: Video mode, : S-video mode, : Comp.video mode, : RGB mode

Download from Www.Somanuals.com. All Manuals Search And Download.

• Adjusting Contrast (Contrast)

Any value between -30 and +30 can be selected.

: Higher contrast

: Lower contrast

Press

to store.

• Adjusting Screen Brightness (Brightness)

Any value between -60 and +60 can be selected.

: Brighter screen

: Darker screen

Press

to store.

• Adjusting Color Darkness (Color)

Any value between -60 and +60 can be selected.

: Darker colors

: Lighter colors

Press

to store.

• Adjusting Tint (Tint)

Any value between -30 and +30 for [

: More greenish colors

], and -60 and +60 for [

] can be selected.

: More purplish colors

Press

to store.

• Adjusting picture Sharpness (Sharpness)

Any value between -16 and +16 for [

: Sharper pictures

(Decoder)], and -4 and +4 for [ (RGB-PC)], can be selected.

: Less sharp pictures

Press

to store.

• Setting Picture Mode (Picture Mode)

Can set up the picture mode.

Each time you press or , one of the available choices appears in the following sequence:

Dinamic:Suitable for watching a normal motion picture.(Standard)

Fine:

Suitable for watching a dark picture such as movie.

Real 1: Makes a strong contrast picture.

Real 2: Makes a bright color picture.

Static: Suitable for watching a still picture.

Press

to store.

*Select Dinamic, Fine, Real 1, Real 2 or Static to suit your taste.

• Adjusting Color Tem perature (Color Tem p.)

Use or to specify a desired color temperature. Each time you press or , one of the available choices appears in the following sequence:

Warm: More reddish colors

Standard:Standard color temperature

Cool:

User:

More bluish colors

User Color Temp. setup

Press

to store.

• Setting User Color Tem p. (User Color Tem p.)

Can set up when User is selected in Color Temp.

Press

to select Red, Green or Blue and press or to make adjustment in the range

of 0 to 255.

Press

to store.

* Color Temp. setup is switched to User. The initial value of User Color Temp. is adjusted

individually at the factory.

• Setting Noise Reduction (Noise Reduction)

Can select the noise reduction setting corresponding to the noise level of the input signal.

Each time you press or ,one of the available choices appears in the following sequence:

User Color Tem p.adjustm ent screen

Off: Noise reduction does not function.

Min.: Weak setting

Std.: Standard setting

Max.: Strong setting

Press

to store.

*Some type of signal can not be selected.

Download from Www.Somanuals.com. All Manuals Search And Download.

ADJ USTING SCREEN POSITION AND SIZE (POSITION/ SIZE MENU)

BASIC OPERATION [EX.: ADJ USTING HORIZONTAL DIRECTION OF SCREEN POSITION

]

You can make changes to all screen adjustment options in the POSITION/SIZE Menu.

The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any

changes.

Press

The main menu screen will appear.

Press

“POSITION/ SIZE”.

to select

“POSITION/SIZE” selected from the m ain

m enu screen

Each time you press or , one of the available

menus appears in the following sequence:

PICTURE

POSITION/SIZE

AUDIO

FEATURES

FACTORY DEFAULT

The POSITION/SIZE Menu screen will appear.

Press

“Position”.

to select

* You can also use the

switches on the display’s

control panel to accomplish

these steps.

Press

The “Position” adjustment screen will appear.

Press

to select

“Horizontal” values of screen

position.

Press

The “Horizontal” adjustment screen will appear.

“Position” adjustm ent screen

Press

to change

horizontal values.

: Moves screen to the right.

Moves screen to the left.

Press

to store.

w hen you finish.

* Repeat steps 3 to 8 when you wish to make

changes to other options.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting Screen Position (Position)

Horizontal position (Horizontal)

Moves screen to the right.

Moves screen to the left.

→

“Position” adjustm ent screen

Vertical position (Vertical)

Moves screen up.

Moves screen down.

to store.

→

Press

Adjusting Screen Size (Size)

Screen width (Width)

→

Increases width.

Reduces width.

“Size” adjustm ent screen

Screen height (Height)

→

Increases height.

Reduces height.

to store.

Press

*You cannot adjust screen size in RGB1 (DVI-D) mode.

Setting Range

Video, S-video m ode

Com p.video m ode

RGB m ode

Position

Size

Horizontal: -30 to +30

Vertical

-16 to +16

-32 to +32 (for1080I,720P)

RGB-PC: -150 to +150

Decoder: -16 to +16

-32 to +32 (for1080I,720P)

Zoom:

-15 to +15

Others: -7 to +7

-7 to +7

-4 to +4

RGB-PC: -25 to +50

Decoder: -4 to +4

* On-screen information disappears if you do not take any action for about 60 seconds.

* The following abbreviations used in this document represent input modes in which you can make adjustments:

: Video mode, : S-video mode, : Comp.video mode, : RGB mode

Download from Www.Somanuals.com. All Manuals Search And Download.

ADJ USTING AUDIO (AUDIO MENU)

BASIC OPERATION [EX.: ADJ USTING VOLUME BALANCE (Balance)]

You can make changes to all sound adjustment options in the AUDIO Menu.

The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any

changes.

Press

The main menu screen will appear.

Press

to select “AUDIO”.

“AUDIO” selected in the m ain m enu screen

Each time you press or , one of the available

menus appears in the following sequence:

PICTURE

POSITION/SIZE

AUDIO

FEATURES

FACTORY DEFAULT

The AUDIO Menu screen will appear.

Press

to select

“Balance”.

* You can also use the

switches on the display’s

control panel to accomplish

these steps.

Press

The “Balance” adjustment screen will appear.

“Balance” selected in the AUDIO Menu

screen

Press

to adjust the

balance.

: Higher volume from the right-hand speaker

: Higher volume from the left-hand speaker

Press

to store.

Press

w hen you finish.

* Repeat steps 3 to 6 when you wish to make

changes to other options.

* Audio Input menu will not be displayed when

“No Audio” is selected. (See P. 35.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting Treble (Treble)

Any value between -6 and +6 can be selected.

: Stronger treble

Each audio input

: Weaker treble

Adjusting Bass (Bass)

Any value between -6 and +6 can be selected.

: Stronger bass

AUDIO Menu screen

: Weaker bass

Adjusting Volum e Balance (Balance)

Any value between -10 and +10 can be selected.

: Higher volume from the right-hand speaker

: Higher volume from the left-hand speaker

* On-screen information disappears if you do not take any action for about 60 seconds.

* The following abbreviations used in this document represent input modes in which you can make adjustments:

: Video mode, : S-video mode, : Comp.video mode, : RGB mode

Download from Www.Somanuals.com. All Manuals Search And Download.

OTHER ADJ USTMENTS (FEATURES MENU)

BASIC OPERATION [EX.: SELECTING LANGUAGE (Language)]

You can make the following changes in the FEATURES Menu.

Press

The main menu screen will appear.

Press

to select “FEATURES”.

“FEATURES” selected in the m ain m enu

screen

Each time you press or , one of the available

menus appears in the following sequence:

PICTURE

POSITION/SIZE

AUDIO

FEATURES

FACTORY DEFAULT

The FEATURES Menu screen will appear.

Press

Menu".

to select "On Screen

• Select a desired option for adjustment/setup from

Adjustment, Function, On Screen Menu, Input

Terminal and Others.

* You can also use the

switches on the display’s

control panel to accomplish

these steps.

Press

On Screen Menu screen

• On Screen Menu appears.

Press

to select “Language”.

Press

The “Language” selection screen will appear.

“Language” selection screen

Press

to select the

language.

Press

The menu is displayed in the selected language.

Press

w hen you finish.

* Repeat steps 3 to 8 when you wish to make changes

to other options.

Download from Www.Somanuals.com. All Manuals Search And Download.

• FEATURES setup screen has the follow ing 5 options.

Adjustment

Function

: Can make a fine adjustment of pictures such as Dot Clock, Clamp Position.

: Can make a function setting such as 24 Frame Mode, 3D Y/C. (See P. 32.)

On Screen Menu : Can make a display setting such as OSD, Language. (See P. 32.)

Input Terminal : Can make an input terminal setting such as Video Input. (See P. 33 - 34.)

Others

: Can make other settings. (See P. 34 - 38.)

ADJ USTMENT

• Adjusting Dot Clock (Dot Clock)

You may find that pictures blur, depending on the clock frequency of your PC’s processor.

If you experience blurring, you can obtain a clearer picture by adjusting the “Dot Clock”.

Use or to select a value between -60 and +60.

Press

to store.

• Adjusting Clock Phase (Clock Phase)

You may find that pictures blur, depending on the clock phase of your PC’s processor. If you

experience blurring, you can obtain a clearer picture by adjusting the “Clock Phase”.

Use

to select "Auto" or "Manual".

Makes automatic adjustment.

Auto:

Manual: Does not make automatic adjustment.

Use or to specify a value between 1 and 32.

When selecting Manual by Clock Phase

Press

to store.

• Elim inating Flicker (Vertical Sync)

Corrects the vertical synchronization signal timing to eliminate vertical flicker.

Use or to specify a value between -1 and +1.

Press

to store.

*Some type of signal can not be selected.

• Adjusting Clam p Position (Clam p Position)

Adjusts clamp pulse in accordance with the input signal received from connected equipment.

Use or to specify a value between -8 and 8.

Press

to store.

• Selecting the Optim um Dynam ic Range of Im ages (Auto Calibration)

Receives a white screen signal and adjusts the dynamic range of images to the optimum.

(1) Select Auto Calibration and press

Auto Calibration screen appears.

(2) Select Execute and press

"Auto Calibration" setting screen

Press

Yes: Stores the data of Auto Calibration.

No: Disables the execution result of Auto Calibration.

to select Yes or No.

(3) Press

to execute.

"Yes/No" selection screen

* On-screen information disappears if you do not take any action for about 60 seconds.

* The following abbreviations used in this document represent input modes in which you can make adjustments:

: Video mode, : S-video mode, : Comp.video mode, : RGB mode

Download from Www.Somanuals.com. All Manuals Search And Download.

OTHER ADJ USTMENTS (FEATURES MENU)(Continued)

FUNCTION

• Displaying the optim um m ovie pictures (24 Fram e Mode)

Can make the optimum display of 24 frames/second signals such as movie pictures.

Each time you press or , one of the available choices appears in the following sequence:

Off

On : Displays the optimum movie pictures.

Off : Displays normal pictures.

Press

to store.

*Some type of signal can not be selected.

• Setting 3DY/ C Circuit (3DY/ C)

Selects whether to use the 3D Y/C circuit.

Each time you press or , one of the available choices appears in the following sequence:

Off

On : Enables the 3D Y/C circuit.

You can make this selection only for 3.58NTSC signal.You can make the optimum display for the movie film signals.

Off : Enables 3-line.

Press

to store.

ON SCREEN MENU

• Setting Display Inform ation (OSD)

All m odes

You can use this option to select whether to display information other than menus. (Error messages

are displayed regardless of what choice you make for this option.)

Each time you press , one of the available choices appears in the following sequence:

Off

On : Displays all information.

Off : Displays only menus and error messages.

Press

to store.

• When rotating text (for installing the display w ith one of its sides facing dow n)

Rotating text (OSD Rotate)

All m odes

You can use this option to rotate the text.

Each time you press or , one of the available choices appears in the following sequence:

-90 Deg. : Displays text from left to right when the display is installed with the power indicator lamp at the top.

Normal : Displays text normally.

+90 Deg. : Displays text from left to right when the display is installed with the power indicator lamp at the bottom.

Press

to store.

• Selecting Language (Language)

All m odes

You can use this option to select the language displayed on the screen.

(1) Select “Language” and press

The “Language” selection screen will appear.

(2) Press or to select your desired language.

English

Deutsch (German)

Español (Spanish)

Français (French)

Italiano (Italian)

"Language" selection screen

Português (Portuguese)

(3) Press

The menu is displayed in the selected language.

Download from Www.Somanuals.com. All Manuals Search And Download.

INPUT TERMINAL

• Selecting Video Mode (Video Input)

You can use this option to select the desired video mode of pictures it will receive to the Video Input

terminal.

Each time you press or , one of the available modes appears in the following sequence:

Auto:

Automatically selects NTSC, PAL and SECAM.

Other than Auto: You need to select a system appropriate to the input signal.

Press

to store.

• Selecting Video Mode (S-video Input)

You can use this option to select the desired video mode of pictures it will receive to S-video Input

terminal.

Each time you press or , one of the available modes appears in the following sequence:

Auto:

Automatically selects NTSC, PAL and SECAM.

Other than Auto: You need to select a system appropriate to the input signal.

Press

to store.

• Selecting BNC Input (BNC-Input)

All m odes

You can use this option to select the signal system it will receive to BNC Input terminal.

(1) Select BNC Input and press

BNC Input screen appears.

(2) Select the signal system to receive.

Each time you press or , one of the available choices appears in the following sequence:

"BNC-Input" selection screen

Comp.video: For using color difference input.

RGB-PC:

Decoder:

For using PC wih RGB signal input.

For using decoder with RGB signal input.

to select Function.

(3) Press

(4) Select Comp.video or Decoder by FUNCTION to set up Mask.

Each time you press or , one of the available choices appears in the following sequence:

This fringe part is m asked.

Off:

Does not mask.

Number:Masks the fringe (top, bottom, right and left) of the screen by the number of pixels specified.

(5) Press

to store.

* On-screen information disappears if you do not take any action for about 60 seconds.

* The following abbreviations used in this document represent input modes in which you can make adjustments:

: Video mode, : S-video mode, : Comp.video mode, : RGB mode

Download from Www.Somanuals.com. All Manuals Search And Download.

OTHER ADJ USTMENTS (FEATURES MENU)(Continued)

INPUT TERMINAL

• Selecting D-SUB Input (D-SUB Input)

All m odes

You can use this option to select the signal system it will receive to D-SUB Input terminal.

(1) Select D-SUB Input and press

D-SUB Input screen appears.

(2) Select the signal system to receive.

Each time you press or , one of the available choices appears in the following sequence:

RGB-PC Decoder

"D-SUB Input" selection screen

RGB-PC: For using RGB for PC

Decoder: For using digital broadcast tuner

(3) Press

to select Function.

(4) Select Decoder by FUNCTION to set up Mask.

Each time you press or , one of the available choices appears in the following sequence:

Off:

Does not mask.

This fringe part is m asked.

Number: Masks the fringe (top, bottom, right and left) of the screen by the number of pixels

specified.

OTHERS MENU

• Selecting tim e before DPMS starts (DPMS)

All m odes

You can use this option to select the amount of time before the DPMS function starts.

DPMS (which stands for “display power management signaling”) allows the display to maintain an

automatic power saving function.

This function causes on-screen information to disappear until the next input operation, if the power

is ON and the display has not received any signals for the predetermined period of time. When

DPMS is active, the power indicator lamp turns orange.

(1) Select DPMS and press

DPMS screen appears.

DPMS selection screen

(2) Press

to select Time.

(3) Each time you press or , one of the available choices appears in the following sequence:

Off:

Disables DPMS

Number: Approximate time before DPMS starts. (Unit: minutes)

* The power indicator lamp turns orange while the DPMS is ON.

* The power turns ON automatically when the display receives a signal.

(4) Can specify background color.

Press

Each time you press or , one of the available choices appears in the following sequence:

Black White

to select background color.

Black: Mutes images in Black background.

White:Mutes images in White background.

* Switches approx. 20 seconds after the display stops receiving signals.

(5) Press

to store.

* DPMS does not function in RGB1 mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

• Selecting input term inals (Audio Input)

All m odes

You can use this option to select one of the two available terminals to receive sound from input

equipment.

(1) Select “Audio Input” and press

The “Audio Input” selection screen will appear.

(2) Press or to select input equipment.

(3) Select a desired input terminal.

Each time you press or , one of the available choices appears in the following sequence:

“Audio Input” selection screen

No audio:

No sound in the corresponding mode.

Audio 1, Audio 2: Selects Audio 1 or 2 for receiving sound in the corresponding mode.

* Repeat steps (2) and (3) for each piece of input equipment.

(4) Press

to store.

*Audio Input menu will not be displayed when "No Audio"is selected.

• Minim izing phosphor burn-in (Screen Orbiter)

You can use this option to move the screen position to minimize phosphor-induced “burn-in”.

Follow the steps below.

(1) Select “Screen Orbiter” and press

The “Screen Orbiter” setting screen will appear.

(2)Press or to select “Mode/Time”.

(3)Select a desired pattern.

Each time you press or , one of the available choices appears in the following sequence:

“Screen Orbiter” setting screen

Off:Disables Screen Orbiter.

Time: Moves the pattern approximately every one hour.

Mode: Moves the pattern when the power is turned ON or when you switch between modes.

(4)Press

to select “Moving Area”.

(5) Press or to select the range for moving the pattern.

Each time you press or , one of the available choices appears in the following sequence:

Min.: Pattern moves in small range. (About 5 pixels)

Std.: Pattern moves in moderate range. (About 10 pixels)

Max.: Pattern moves in wide range. (About 15 pixels)

(6) Press

to store.

* On-screen information disappears if you do not take any action for about 60 seconds.

* The following abbreviations used in this document represent input modes in which you can make adjustments:

: Video mode, : S-video mode, : Comp.video mode, : RGB mode

Download from Www.Somanuals.com. All Manuals Search And Download.

OTHER ADJ USTMENTS (FEATURES MENU)(Continued)

Using screen protection functions (exam ples)

The screen protection functions minimize phosphor burn-in but cannot completely eliminate it.

When using the display occasionally

When using the display continuously

• Select a desired amount of time for “DPMS”.

When sw itching between RGB and video input m odes only

occasionally

(1) Select “Time” for “Mode/Time” with “Screen Orbiter”.

(2) Select a desired range for “Moving Area” with “Screen Orbiter”.

This causes the screen saver pattern to move in the same range at

regular intervals.

Thus, when the display does not receive a signal, it will automatically

display white or black over the entire screen. When the predetermined

time elapses, the power will turn OFF.

When sw itching between RGB and video input m odes

frequently

(1) Select “Mode” for “Mode/Time” with “Screen Orbiter”.

(2) Select a desired range for “Moving Area” with “Screen Orbiter”.

When the mode is switched from Video to RGB, the display position

moves.

• Input m ode of priority (Input Priority)

All m odes

You can use this option to switch between modes only when a signal is received through the

selected input mode terminal. You cannot switch the input mode.

Each time you press or , one of the available choices appears in the following sequence:

Off:

Switches between modes normally.

Other modes: Displays pictures when a signal is received through the selected input mode

terminal.

Press

to store.

*RGB1 mode cannot be selected.

• Assigning Num bers to Displays (Monitor No.)

All m odes

When you use two or more displays, you can use a single remote control to control individual

displays by assigning a unique number to each of the displays.

Each time you press or , one of the available numbers appears in the following sequence:

0: You can normally control displays.

You cannot control displays if you press any of [SHIFT 1] through [SHIFT 4].

1–4: Allows you to control a desired display by pressing the corresponding button (one of

[SHIFT 1] through [SHIFT 4]).

When you do not press any of the SHIFT buttons, you can control all displays.

Press

to store.

* You can check the “Monitor No.” on the Information screen. (See P.38.)

Download from Www.Somanuals.com. All Manuals Search And Download.

• Setting RGB Input Signal Com pulsorily (Direct Setting)

You can use this option to switch the setting for RGB input signal.

Each time you press or , one of the available choices appears in the

following sequence:

For RGB1 mode:

For RGB2.3 mode:

Auto: The optimum display is obtained automatically for input signals.

Others: The optimum resolution setting is fixed for each signal.

Press

to store.

* In Auto mode, the resolution of VGA, WVGA, 480P, XGA, WXGA, SXGA and SXGA⁺may

not be automatically distinguished. Switch to the fixed display when the image is not displayed

properly.

• Specifying RGB Input Signal (Code Setting)

You can use this option to specify and display the type of RGB input signal by code number.

Each time you press

sequence:

, one of the available choices appears in the following

Auto

Manual

Auto: Automatically displays the input signal to the optimum.

Manual: Selects RGB code number.

Press

to store.

"Code Setting" setting screen

* In Auto mode, the optimum resolution may not be set up automatically depending on the type of

signal.

Select the type of signal when the image is not displayed properly.

However, note that when the type of signal is selected directly, the signal of other resolution

may not be displayed properly.

• Displaying w hite over entire screen (White Screen)

All m odes

You can use this option to display white over the entire screen to minimize phosphor burn-in.

Each time you press or , one of the available choices appears in the following sequence:

Off

Off: Does not display white.

On: Displays a white screen immediately.

Press

to store.

* On-screen information disappears if you do not take any action for about 60 seconds.

* The following abbreviations used in this document represent input modes in which you can make adjustments:

: Video mode, : S-video mode, : Comp.video mode, : RGB mode

Download from Www.Somanuals.com. All Manuals Search And Download.

OTHER ADJ USTMENTS (FEATURES MENU)(Continued)

• Setting Exhibition Mode (Exhibition Mode)

All m odes

You can use this option to display the enhanced contrast, which is most suitable for the use by

unspecified persons.

Each time you press or , one of the available choices appears in the following sequence:

Off

On: Sets up Exhibition mode.

Off: Sets up normal mode.

Press

to store.

* In Exhibition mode, the display returns to the original setting in about 5 minutes even if the

adjustment is changed.

* The setup will be cancelled when removing the power plug from the receptacle.

• Horizontal/ Vertical installation (Installation)

All m odes

You can use this option to setup the number of fan rotation, etc. for horizontal and vertical

installation.

Each time you press or , one of the available choices appears in the following sequence:

Horizontal

Vertical

Horizontal:For installing horizontally

Vertical: For installing vertically

Press

to store.

* Be sure to make this setup when changing the direction of installation.

• Locking Main Unit Button (Key Lock)

All m odes

You can use this option to disable the main unit button.

Each time you press or , one of the available choices appears in the following sequence:

On Off

On: Disables the main unit button.

Off: Enables the main unit button.

Press

to store.

• Displaying System Status (Inform ation)

Displays system operation status.

Select “Information” and press

The “Information” screen will appear.

Mode:

Input mode appears at the upper right corner of the screen.

Monitor number

Monitor No.:

Freq. Scan Mode: Frequency scanning

Inform ation screen (Video Input Mode)

Input Signal:

Input Sync.:

Freq.:

Video mode

Signal type

Frequency and polarity (fH, fV)

RGB code number

Preset No.:

Inform ation screen (RGB2 Input Mode)

* On-screen information disappears if you do not take any action for about 60 seconds.

* The following abbreviations used in this document represent input modes in which you can make adjustments:

: Video mode, : S-video mode, : Comp.video mode, : RGB mode

Download from Www.Somanuals.com. All Manuals Search And Download.

INITIALIZATION OF USER ADJ USTMENT VALUE(FACTORY DEFAULT)

You can restore the values of the adjustment/setting made in the MENU to factory settings.

Press

The main menu screen will appear.

Press

DEFAULT”.

to select “FACTORY

“FACTORY DEFAULT” selected in the

m ain m enu screen

Each time you press or , one of the available

menus appears in the following sequence:

PICTURE

POSITION/SIZE

AUDIO

FEATURES

FACTORY DEFAULT

The FEATURES Menu screen will appear.

Press

• Displays the message of whether to proceed

with the initialization.

* You can also use the

switches on the display’s

control panel to accomplish

these steps.

Press

to select the Yes.

Displays the m essage of whether to

proceed the initialization

Press

• The message of having completed the

initialization will be displayed after initializing.

Press

w hen you finish.

Displays the m essage of having

com pleted the initialization

Download from Www.Somanuals.com. All Manuals Search And Download.

OPTIONS

Wall-mounting unit

(for both vertical and horizontal)

Vertical: 0° to 5° mounting angle

P-42WB12

P-42CT11

P-42TT33

Horizontal: 0° to 15° mounting angle

Hanging unit

0° to 15° mounting angle (variable)

The pipe is not supplied with the ceiling-

hanging unit, so consult your produce dealer.

Stand

Speaker

P-42SP11

(1 set of 2 speakers)

Speaker Stand

P-42ST11

(1 set of 2 speakers stands)

* When installing an option, make sure that all installation requirements for that option (as given in the relevant instruction manual) are met.

* The colors of options do not match the display colors perfectly.

Warning

To prevent injury, fire, and electric shock, arrange for options to be initially installed (or installed at a different location) by your dealer.

Download from Www.Somanuals.com. All Manuals Search And Download.

FACTORY SETTINGS

This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment value

of the first input signal.

To do this, select a desired signal and follow the instructions in “Adjusting Screen Position and Size” on P. 26–27 to adjust the

parameters. When you finish, the settings will be automatically stored. Thus, when the display receives that signal, pictures will be

displayed in accordance with the settings you most recently selected.

Main corresponding signals (RGB m ode)

Display (dots x lines)

Horizontal frequency (kHz)

Vertical frequency (Hz)

Signal

640 x 480

720 x 400

800 x 600

1024 x 768

1280 x 1024

640 x 480

848 x 480

852 x 480

720 x 485

720 x 575

640 x 400

31.47

37.86

37.50

43.27

31.47

37.88

48.08

46.88

53.67

48.36

56.48

60.02

63.98

79.98

35.00

31.02

31.72

15.73

15.63

31.50

59.94

72.81

75.00

85.01

70.09

60.32

72.19

75.00

85.06

60.00

70.07

75.03

60.02

75.03

66.67

60.00

59.97

59.94

50.00

70.15

VGA

VGA 72 Hz

VGA 75 Hz

VGA 85 Hz

400 lines

SVGA 60 Hz

SVGA 72 Hz

SVGA 75 Hz

SVGA 85 Hz

XGA 60 Hz

XGA 70 Hz

XGA 75 Hz

SXGA 60 Hz

SXGA 75 Hz

MAC 13RGB

60 fields

50 fields

NEC 31 kHz

* With some input signals, “Out of range” may appear even when the horizontal and vertical frequencies are within their permissible ranges. Make

sure that the vertical frequency of the input signal is 85 Hz or less for SVGA, 75 Hz or less for XVGA/ SXGA.

In the Comp.video and Video/S-video modes, the display has been factory-set as follows for different input signals:

Main corresponding signals (Com p.video m ode)

Main corresponding signals (Video, S-video m ode)

Horizontal

frequency (kHz)

Vertical

frequency (Hz)

Horizontal

frequency (kHz)

Vertical

frequency (Hz)

Signal

NTSC

15.73

15.63

31.47

31.25

45.00

37.50

33.75

28.13

59.94

50.00

59.94

50.00

60.00

50.00

60.00

50.00

SDTV 480I

SDTV 576I

SDTV 480P

SDTV 576P

HDTV 720P

HDTV 1080I

15.73

15.63

15.73

59.94

50.00

59.52

50.00

59.95

59.94

PAL

SECAM

PAL60

N-PAL

M-PAL

4.43NTSC

• With the 800 x 600, 1024 x 768 and 1280 x 1024 modes, pictures of reduced size are displayed on the screen, using size reduction and interpolation.

Note also that on-screen information is also displayed in reduced size.

• “Out of range” appears if the display receives a signal whose characteristic does not fall within the display’s permissible range.

• You can check input signals through “Information” on the FEATURES Menu screen. (See P. 38.)

• All terms (i.e., company and product names) used in this document are trademarks or registered trademarks.

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIFICATION

Model

PDS4233W/ PDS4234W

Screen size

42" wide screen: 92.0 cm (W) x 51.8 cm (H) (105.6 cm diagonal)

36.2 inch (W) x 20.4 inch (H) (41.6 inch diagonal)

Aspect ratio

16:9 (wide)

Weight

28.5 kg / 62.8 lbs

Outer dimensions

Power supply

103.5 (W) x 64.0 (H) x 8.5 (D) cm / 40.7 (W) x 25.2 (H) x 3.3 (D) inch

100–240 VAC 50/60 Hz

Power consumption

Screen dimensions

Number of pixels

Display modes

3.5 A

92.0 (W) x 51.8 (H) cm / 36.2 (W) x 20.4 (H) inch

852 (H) x 480 (V)

Video, S-video input:

Component video input: Normal/Wide1/Wide2/Zoom1/Zoom2

RGB: Normal/Wide/Zoom

Normal/Auto/Wide1/Wide2/Zoom1/Zoom2

Colors

16.77 million (for each of 256 RGB gradations)

External equipment terminals

Video input terminals

Video input

1 BNC terminal 1 Vp-p/75 Ω

S-video input

1 S terminal

1 Vp-p/75 Ω

0.286 Vp-p/75 Ω

Component video input (color difference input)

3 BNC terminals Y:

1 Vp-p/75 Ω

P^B/B-Y: 0.7 Vp-p/75 Ω

P^R/R-Y: 0.7 Vp-p/75 Ω

–

Applicable systems

PC input terminal

NTSC/PAL/SECAM/PAL60/N-PAL/M-PAL/4.43NTSC

RGB1 input terminal

RGB2 input terminal

1 DVI-D terminal

mD-sub, 3 rows, 15-pin

Picture signal: 0.7 Vp-p/75 Ω

Synchronization signal:TTL level

RGB3 input terminal

5 BNC terminals

R:0.7 Vp-p/75 Ω

G:0.7 Vp-p/75 Ω

B:0.7 Vp-p/75 Ω

H:TTL level or 0.3 Vp-p/75 Ω

V:TTL level or 0.3 Vp-p/75 Ω

Sound terminals

Control terminal

2 sound input pin jacks (L/R) (2 lines)

500 mVrms/at least 22kΩ

1 RS-232C connector (D-sub 9-pin)

External speaker output terminal Lever terminal, 1 line (L/R)

Effective max. output: 9 W + 9 W (EIAJ), 8 Ω

Temperature: 0 to 40 °C / 32 to 104 °F

Humidity: 20 to 90 %

1 remote control, 2AA batteries, 1 instruction manual, 1 power cable, 2 ferrite cores

Operating conditions

Accessories

• Specifications and external appearance may be change for the sake of improvement.

•

is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas.

Download from Www.Somanuals.com. All Manuals Search And Download.

Regulation ---PDS4233W

• UL, CSA Safety: UL1950/CSA C22.2 No.950

EMC: FCC Part 15 Class A, ICES-003 Class A

• CE Safety: EN60950 1992, A1: 1993, A2: 1993, A3: 1995, A4: 1997

EMC: EN55022

EN61000-3-2 1995

EN61000-3-3 1995

EN55024 1998

1998, Class A

EN61000-4-2 1995

EN61000-4-3 1996

EN61000-4-4 1995

EN61000-4-5 1995

EN61000-4-6 1996

EN61000-4-8 1993

EN61000-4-11 1994

• AS Safety: IEC60950 A1/A2/A3/A4

EMC: AS/NZS 3548

Regulation ---PDS4234W

• UL, CSA Safety: UL1950/CSA C22.2 No.950

EMC: FCC Part 15 Class B, ICES-003 Class B

• CE Safety: EN60950 1992, A1: 1993, A2: 1993, A3: 1995, A4: 1997

EMC: EN55022

EN61000-3-2 1995

EN61000-3-3 1995

EN55024 1998

1998, Class B

EN61000-4-2 1995

EN61000-4-3 1996

EN61000-4-4 1995

EN61000-4-5 1995

EN61000-4-6 1996

EN61000-4-8 1993

EN61000-4-11 1994

• AS Safety: IEC60950 A1/A2/A3/A4

EMC: AS/NZS 3548

Download from Www.Somanuals.com. All Manuals Search And Download.

CLEANING AND MAINTENANCE

Precautions

Cleaning the Cabinet and Rem ote Control

Be sure to remove the power plug from the receptacle before

cleaning the display.

Be sure not to clean the display using a cloth dampened with

volatile solvents, such as benzene or thinner. Such solvents can

harm the display’s cabinet, the filter at the screen front, and the

remote control. They can also cause paint to come off these

sections.

Use a soft cloth for cleaning.

If the cabinet or remote control is heavily stained, soak a soft cloth

in a mixture of water and detergent and squeeze it dry before

wiping off the stains. Use a soft, dry cloth for final cleaning.

Cleaning the ventilation grille

Remove dust from the ventilation grille in the rear of the main unit

periodically with a vacuum cleaner as the accumulated dust can

increase the internal temperature of the main unit causing machine

failure or fire hazard.

Cleaning the Screen

Clean the screen gently with a soft cloth.

The screen surface is fragile. Never attempt to clean it with a hard

material, press on it forcefully, or tap it.

HANDYTIPS

In the event of problems with the display, check the following explanations before contacting your dealer for servicing.

Problem

• Power does not turn ON.

• No pictures are displayed.

Action

• Check whether the power plug is securely inserted into the receptacle.

• Check cables for disconnection.

• Check whether the power for all input equipment is ON.

• Check for connection to wrong terminals or for wrong input mode.

• Check whether the input mode display is colored pink.Special setup may have been

made. Return to original setup or initialize the User adjustment value.

• Remote control does not function properly. • Check for incorrect battery orientation.

• Check for dead batteries.

• Check for distance from the display.

• Check whether you are pointing the remote control transmitter properly at the display’s

receiver.

• Check for any obstacle between the remote control and the display.

• The display makes a snapping sound.

• The display makes a buzzing sound.

• There are spots on the screen.

• Degraded colors/tints

• This sound is produced when the cabinet expands or contracts due to variations in

temperature. This sound does not indicate that the display has a problem.

• The display has fans to maintain the temperature of internal components at a constant

level. This sound is produced by the fan as it rotates.

• Check whether your AV equipment is affected by interference from automobiles, trains,

high-voltage transmission lines, neon signs or other potential sources of interference.

• Check whether all picture adjustments have been properly made.

(See “Adjusting Pictures” on P. 24–25.)

• Improper screen position/size

• Check whether screen position and size have been properly adjusted.

(See “Adjusting Screen Position and Size” on P. 26–27.)

• No sound from speakers

• No sound

• Check cables for disconnection.

• Check whether you have selected “No Audio” for the “Audio Input” setting.

(See “Features” on P. 35.)

• If “Invalid operation” appears.

• Check whether you have selected “Input Priority”.(See “Features” on P. 36.)

• If “Out of range” appears, the display is

receiving a signal whose picture or signal

cannot be reproduced by the display.

• Input proper signals.

Make sure that the vertical frequency of the input signal is 85 Hz or less for SVGA, 75

Hz or less for XVGA / SXGA.

• The screen turns to black and white.

• Input proper signals.

Make sure that the vertical frequency of the input signal is 85 Hz or less for SVGA, 75

Hz or less for XVGA / SXGA.

• If “Error message Condition 1” appears,

the fan is defective.

• Remove the power plug from the receptacle, and contact your dealer for repairs.

• If “Error message Condition 2” appears,

the display’s internal components are

extremely hot.

• Remove the power plug from the receptacle. (You can turn the power back ON again

when the components have cooled sufficiently.) If the message appears again when you

turn the power back on, remove the power plug from the receptacle, and contact your

dealer for a repairs.

• Remove the power plug from the receptacle, and inform your dealer about how the lamp

flashed.

• If the power indicator lamp flashes red.

As explained below, the power indicator lamp flashes differently depending on the type

of problem:

– Flashes repeatedly: Improper supply voltage level

– Flashes once: Malfunction by the fan

– Flashes twice: Excessive temperature

– Flashes three times or more: Other problems

Download from Www.Somanuals.com. All Manuals Search And Download.

1116, Suenaga, Takatsu-ku, Kawasaki 213-8502, Japan

8112778015

Printed in Japan

Download from Www.Somanuals.com. All Manuals Search And Download.

A list of errata.

P.44

SPECIFICATION

Screen size

(error) 92.0 cm(W) x 51.8 cm(H) (105.6 cm diagonal)

36.2 inch(W) x 20.4 inch(H) (41.6 inch diagonal)

↓

(exactly) 92.1 cm(W) x 51.8 cm(H) (105.7 cm diagonal)

36.3 inch(W) x 20.4 inch(H) (41.6 inch diagonal)

P.44

SPECIFICATION

Operating conditions

(error) Humidity:

↓

20 to 90 %

20 to 80 %

(exactly) Humidity:

Download from Www.Somanuals.com. All Manuals Search And Download.

Clarion CD Player DXZ746MP User Manual
Cobalt Networks Microphone Co11 User Manual
Cub Cadet Lawn Mower Ex32002 User Manual
Cuisinart Waffle Iron WMB 4AC User Manual
Curtis Camcorder VR285 User Manual
Directed Audio Stereo Equalizer Model 6500 User Manual
Dukane Welder 90012000 User Manual
Electro Voice Microphone N D 257B User Manual
Electro Voice Speaker System EVR 200 User Manual
Franke Consumer Products Ventilation Hood FKU 368 TC I User Manual