Owner’s manual
ꢀꢁ !"
사용 설명서
DXZ746MP
AM / FM CD / MP3 / WMA PLAYER
•
^jLcj=`aLjmPLtj^=ꢀꢁ
•
AM/FM CD/MP3/WMA 플레이어
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Items
Motorized Face
2. PRECAUTIONS
Function mode indication
The names of modes being
selected, etc. are displayed.
This unit uses motorized face to make large-screen displays possible.
When you use the motorized face, be sure to close it.
Operation status indication
Titles, clock, etc. are displayed.
1. When the inside of the car is very cold and the
player is used soon after switching on the
heater moisture may form on the disc or the
optical parts of the player and proper playback
may not be possible. If moisture forms on the
disc, wipe it off with a soft cloth. If moisture
forms on the optical parts of the player, do not
use the player for about one hour. The con-
densation will disappear naturally allowing nor-
mal operation.
2. Driving on extremely bumpy roads which cause
severe vibration may cause the sound to skip.
3. If you move the MOTORIZED FACE by hand,
CAUTION
BE CAREFUL NOT TO GET YOUR FINGERS
CAUGHT WHEN OPENING AND CLOSING
THE MOTORIZED FACE.
3. This unit uses a precision mechanism. Even in
the event that trouble arises, never open the
case, disassemble the unit, or lubricate the ro-
tating parts.
this may create play. To correct this play, with
the power on for the unit, press the [Q] but-
ton to close the MOTORIZED FACE.
4. After a disc is ejected, the MOTORIZED
FACE automatically returns to the tilted or
closed state. If there is any obstruction when
the MOTORIZED FACE tries to close, the
safety mechanism is triggered and the MO-
TORIZED FACE returns to the open state. If
this happens, remove the obstruction, then
press the [Q] button.
1. For safety’s sake, always close the MOTOR-
IZED FACE before leaving this unit unused
for a prolonged period or switching OFF the
ignition key.
Preset channel indication (1 to 6)
Disc number indication (1 to 12)
If you switch OFF the ignition key with the
MOTORIZED FACE tilted, the MOTORIZED
FACE does not close.
: 2-ZONE indication
CAUTION
: Main indication
USE OF CONTROLS, ADJUSTMENTS, OR PER-
FORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN, MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
5. To avoid scratching the compact disk, keep
the 12 or 8 cm CD level when inserting or re-
moving them.
2. Before the MOTORIZED FACE closes, there
may be a braking sound from the safety
mechanism. This is normal.
: Sub indication
: MP3 indication
: WMA indication
: Anti Distortion Filter indication
THE COMPACT DISC PLAYER and MINI DISC
PLAYER SHOULD NOT BE ADJUSTED OR RE-
PAIRED BY ANYONE EXCEPT PROPERLY
QUALIFIED SERVICE PERSONNEL.
: DTS indication
Handling Compact Discs
Use only compact discs bearing the
: DSF indication
: Stereo indication
: Folder indication
: Disc indication
: P.EQ indication
•
•
Do not use compact discs that have large
scratches, are misshapen, cracked, etc. Use of
such discs may cause misoperation or damage.
or
: DOLBY PL II indication
: DOLBY DIGITAL indication
: LINEAR PCM indication
: MAGNA BASS EXTEND indication
: Manual indication
CHANGES OR MODIFICATIONS NOT EX-
PRESSLY APPROVED BY THE MANUFAC-
TURER FOR COMPLIANCE COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIP-
MENT.
mark.
: Scan indication
: Repeat indication
: Random indication
Do not play heart-shaped, octagonal, or other
specially shaped compact discs.
To remove a compact disc from its storage case,
press down on the center of the case and lift the
disc out, holding it carefully by the edges.
Some CDs recorded in CD-R/CD-RW mode
may not be usable.
• Do not use commercially available CD protec-
tion sheets or discs equipped with stabilizers,
etc. These may damage the disc or cause
breakdown of the internal mechanism.
: Mute indication
INFORMATION FOR USERS:.
Handling
•
Compared to ordinary music CDs, CD-R and
CD-RW discs are both easily affected by high
temperature and humidity and some of CD-R
and CD-RW discs may not be played. Therefore,
do not leave them for a long time in the car.
CHANGES OR MODIFICATIONS TO THIS
PRODUCT NOT APPROVED BY THE MANU-
FACTURER WILL VOID THE WARRANTY.
LCD Screen
Storage
• Do not expose compact discs to direct sunlight
or any heat source.
In extreme cold, the screen movement may slow down and the screen may darken, but this is normal.
The screen will recover when it returns to normal temperature.
• Do not expose compact discs to excess hu-
midity or dust.
• New discs may have some roughness around
the edges. If such
Ball-point pen
discs are used, the
• Do not expose compact discs to direct heat
from heaters.
player may not work
or the sound may
Roughness
Cleaning
skip. Use a ball-point
pen or the like to re-
move any roughness
from the edge of the
disc.
• To remove fingermarks and dust, use a soft
cloth and wipe in a straight line from the center
of the compact disc to the circumference.
• Do not use any solvents, such as commercially
available cleaners, anti-static spray, or thinner
to clean compact discs.
•
Never stick labels on the surface of the compact
disc or mark the surface with a pencil or pen.
• After using special compact disc cleaner, let
the compact disc dry off well before playing it.
• Never play a compact disc with any cello-
phane tape or other glue on it or with peeling
off marks. If you try to play such a compact
disc, you may not be able to get it back out of
the CD player or it may damage the CD
player.
Be sure to unfold and read the next page. / ꢀꢁ !"#$%&'(
이 페이지를 펼친 채로 다음 페이지를 읽어 주십시오.
8
DXZ746MP
DXZ746MP
3
DXZ746MP
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Major Button Operations When External Equipment is
Connected to This Unit
ꢀꢁ
3.CONTROLS /
=/ 컨트롤
4. NOMENCLATURE
Note:
●When the CD/DVD changer is
●When the DTS/DOLBY DIGITAL
Source unit / 主机 / 본체
• Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold).
connected
is connected (DVH940)
[ADF] button
• Press the button to turn on the DSF.
• Press the button to turn on the PLII while the
DSF on.
∗ For details, see the section “CD Changer
Operations”. For the DVD changer, refer
to the Owner’s Manual provided with the
DVD changer.
Names of the Buttons and Their Functions
[
]
ROTARY
[
]
Q
[RELEASE] button
[PLAY LIST] button
[
]
RELEASE
• Deeply push in the button to unlock the DCP.
• Press and hold for 1 second or longer to turn on
or off the play list mode. (MP3/WMA disc only)
[D] button
[ROTARY] knob
• Adjust the volume by turning the knob clock-
wise or counterclockwise.
• When the button is pressed and held,
switches the user titles or track titles, etc.
while in the CD changer mode.
[a], [d] buttons
[RDM] button
• Perform random play while in the CD/MP3/
WMA mode.
• Press the button to change the DSF mode
while the DSF mode is on.
[
]
]
]
[FNC]
[A-M]
[BND]
ADF
[
• Use the knob to perform various settings.
[T] button
• Use the button to input a title in the CD
changer mode.
• Use the button to scroll the title during CD-
text play.
• Press the button to change the PLII mode
while the PLII mode is on.
ISR
COLOR
• Press and hold the button for 1 second or
longer to perform folder random play while in
the MP3/WMA mode.
[Q] button
[
• Press to eject a CD loaded in the unit.
• Press to open the CD slot and insert a CD.
●When the TV is connected
∗ For details, see the section “TV Opera-
tions”.
[RPT] button
[ADF] button
• Repeat play while in the CD/MP3/WMA mode.
• Press and hold the button for 1 second or
longer to perform folder repeat play while in
the MP3/WMA mode.
• Use the button to select one of the 4 types of
sound characteristics already stored in
memory.
[UP], [DN] buttons
• Select the disc.
[P/A] button
[a], [d]
• Perform preset scan while in the TV mode.
When the button is pressed and held, auto
store is performed.
[RDM] button
[ISR] button
• Perform random play. Also perform disc ran-
dom play when the button is pressed and
held.
[
]
[
]
[SCN] button
• Recall ISR radio station in memory.
• Press and hold for 2 seconds or longer: Store
current station into ISR memory (radio mode
only).
[
], [
DN UP
]
[
] button
[
]
[ ]
• Perform scan play for 10 seconds of each
track while in the CD/MP3/WMA mode.
• Press and hold the button for 1 second or
longer to perform folder scan play while in the
MP3/WMA mode.
SCN
D
[
]
DIRECT
• Switch the TV picture mode or VTR (external)
picture mode.
[RPT] button
[
]
[ ]
RPT
T
• Perform repeat play. When this button is
pressed and held, disc repeat play is per-
formed.
• Press and hold the button for 1 second or
longer to switch the main and sub zone
sound source. (only while 2-ZONE mode on).
[DIRECT] buttons
• Store a station into memory or recall it directly.
[
]
[
]
RDM
P/A
[
]
PLAY LIST
[
] button
[a], [d] buttons
[BND] button
• Move the next disc in increasing order.
• Play or pause a CD while in the CD/MP3 mode.
[COLOR] button
• Button’s color change to multicolor.
• Select a station.
[a], [d] buttons
[BND] button
[SCN] button
• Select a station while in the radio mode or
select a track when listening to a CD. These
buttons are used to make various settings.
• Press and hold the button for 1 second or
longer to switch the fast-forward/fast-back-
ward.
[
] button
• Switch the band.
• Perform scan play for 10 seconds of each
track. Disc scan play is performed when the
button is pressed and held.
• Press and hold for 1 second or longer to turn
on or off the 2-ZONE mode.
With the SLOPING CONSOLE opened / 在翻开式面板打开时
• When the button is pressed and held, switch
seek tuning or manual mode.
슬로핑 콘솔이 열린 상태
• Press to switch the control zone between
main zone or sub zone while 2-ZONE mode
on.
[
] button
• Play or pause a CD or DVD.
[a], [d] buttons
[BND] button
[D] button
[
]
CD SLOT
• Select a track when listening to a disc.
• Press and hold the button for 1 second or
longer to switch the fast-forward/fast-back-
ward.
• Switch the band, or seek tuning or manual
tuning while in the radio mode.
• Play a first track while in the CD/MP3/WMA
mode.
• Switch the display indication (Main display,
Clock display).
[T] button
• Use the button to input a title in the radio, CD
mode.
• Press and hold the button for 1 second or
longer to enter the adjust mode.
[A-M] button
• Use the button to switch to the audio mode
(bass/treble, balance/fader ADF, Magna Bass
Extended adjustment)
[P/A] button
• Press and hold for 1 second or longer to turn
on or off the M-B EX mode.
• Perform preset scan while in the radio mode.
When the button is pressed and held, auto
store is performed.
[FNC] button
• Press the button to turn on the power.
Press and hold the button for 1second or
longer to turn off the power.
• Switch the operation mode among the radio
mode, etc.
[UP], [DN] buttons
• Select the folder while in the MP3/WMA
mode.
[DIRECT] buttons
• Store a station into memory or recall it di-
rectly while in the radio mode.
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.
注意：请务必打开此页，并在阅读每一章节时参照上面的正视图。
[CD SLOT]
• CD insertion slot.
주: 이 페이지를 펼쳐두고, 각 장을 읽을 때 전면 그림을 참조하십시오.
5
DXZ746MP
6
DXZ746MP
DXZ746MP
7
Download from Www.Somanuals.com. All Manuals Search And Download.
5. DCP
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in the DCP (DETACHABLE CONTROL PANEL)
case to prevent scratches.
Attaching the DCP
1. Insert the DCP so that the A section on the
right side of the DCP catches on the hook B
on the unit.
We recommend taking the DCP with you when
leaving the car.
Removing the DCP
1. With the MOTORIZED FACE closed, turn off
the power.
2. Press the [RELEASE] button deeply to open
the DCP.
[RELEASE] button
2. Press the left side C of the DCP carefully to
fit it in place.
3. Pull the DCP toward you and remove it.
CAUTION
• The DCP can easily be damaged by
shocks. After removing it, be careful not to
drop it or subject it to strong shocks.
• If the [RELEASE] button is pressed and the
DCP is not locked into place, it may fall out
from vibration of the car. This can break
the DCP, so after removing it, either install
it on the unit or put it in its DCP case.
DCP
• The connector connecting the unit and the
DCP is an extremely important part. Be
careful not to damage it by pressing on it
with fingernails, screwdrivers, etc.
CAUTION
• Always close the MOTORIZED FACE be-
fore removing the DCP.
• If you remove the DCP with the MOTOR-
IZED FACE open, the MOTORIZED FACE
closes immediately. Be careful not to get
your fingers caught.
Note:
• If the DCP is dirty, wipe off the dirt with a soft, dry
cloth only.
9
Download from Www.Somanuals.com. All Manuals Search And DownloadD. XZ746MP
6. REMOTE CONTROL
Receiver for remote control unit
Operating range: 30˚ in all directions
Signal transmitter
Remote control unit
[
]
]
[
]
2-ZONE
FUNC
[
],[
[
[
],[
]
]
BAND
[
]
]
ISR
[
[
[
]
DISP
MUTE
]
[
]
RDM
SCN
[
]
RPT
Inserting the Batteries
1.Turn the remote control unit over, then slide the
rear cover in the direction of the arrow.
AA (SUM-3, IECR-6/1.5V)
Batteries
2.Insert the AA (SUM-3, IECR-6/1.5V) batteries
that came with the remote control unit facing in
the directions shown in the figure, then close the
rear cover.
Notes:
Using batteries improperly can cause them to
explode. Take note of the following points:
Rear cover
• When replacing batteries, replace both batteries
with new ones.
• Do not short-circuit, disassemble or heat batteries.
• Do not dispose of batteries into fire or flames.
• Dispose of spent batteries properly.
Rear side
10
DXZ746MPDownload from Www.Somanuals.com. All Manuals Search And Download.
Functions of Remote Control Unit Buttons
Mode
Button
CD changer
DVD changer
Radio
CD/MP3/WMA
TV
Switches among radio, CD/MP3/WMA, CD changer, DVD changer, TV and AUX.
[FUNC]
Plays the first track.
Top play.
Moves the next disc
in increasing order.
Switches reception
band.
Switches reception
band.
[BAND]
Increases and decreases volume (in all modes).
[
[
] , [
] , [
]
]
Moves preset
channels up and
down.
Moves tracks up and down.
When pressed and held for 1 second:
Fast-forward/fast-backward.
Moves preset
channels up and
down.
No function.
Switches between playback and pause.
No function.
[
]
Turns mute on and off.
[MUTE]
[ISR]
Recalls ISR radio station in memory.
Press and hold for 2 seconds or longer: Stores current station into ISR memory (radio mode
only).
Press and hold the button for 1 second or longer to switch the main and sub zone sound
source (only while 2-ZONE mode on).
Switches among main display, clock display.
[DISP]
[SCN]
Scan play.
Preset scan.
Preset scan.
Scan play.
Press and hold the
button for 1 second
or longer to perform
folder scan play while
in the MP3/WMA
mode.
When pressed and
held for 2 seconds:
Auto store.
When pressed and
held for 2 seconds:
Auto store.
When pressed and
held for 1 second:
Disc scan play.
[RPT]
Repeat play.
No function.
No function.
No function.
Repeat play.
Press and hold the
button for 1 second
or longer to perform
folder repeat play
while in the
When pressed and
held for 1 second:
Disc repeat play.
MP3/WMA mode.
[RDM]
Random play.
Switches between TV
and VTR.
Random play.
Press and hold the
button for 1 second
or longer to perform
folder random play
while in the
When pressed and
held for 1 second:
Disc random play.
MP3/WMA mode.
Press and hold for 1 second or longer to turn on or off the 2-ZONE mode.
Press to switch the control zone between main zone or sub zone while 2-ZONE mode on.
[2-ZONE]
∗ Some of the corresponding buttons on the main unit and remote control unit have different functions.
11
Download from Www.Somanuals.com. All Manuals Search And DownloadD. XZ746MP
7. OPERATIONS
Note:Be sure to read this chapter referring to the front diagrams of
Basic Operations
chapter “3. CONTROLS” on page 5 (unfold).
Adjusting the volume
CAUTION
1. Press the front part of the [ROTARY] knob.
The knob will pop up.
Be sure to lower the volume before switch-
ing off the unit power or the ignition key. The
unit remembers its last volume setting. If
you switch the power off with the volume up,
when you switch the power back on, the
sudden loud volume may hurt your hearing
and damage the unit.
2. Turning the [ROTARY] knob clockwise in-
creases the volume; turning it counterclock-
wise decreases the volume.
∗ The volume level is from 0 (minimum) to 33 (maxi-
mum).
Switching the display
Turning on/off the power
Press the [D] button to select the desired display.
Note:
Each time you press the [D] button, the display
switches in the following order:
• Be careful about using this unit for a long time
without running the engine. If you drain the car’s
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.
Main display ➜ Clock display ➜ Main display
∗ Once selected, the preferred display becomes
the display default. When a function adjust-
ment such as volume is made, the screen will
momentarily switch to that function’s display,
then revert back to the preferred display sev-
eral seconds after the adjustment.
1. Press the [FNC] button.
2. The illumination and display on the unit light
up. The unit automatically remembers its last
operation mode and will automatically switch
to display that mode.
∗ When you have entered a title in a CD, it ap-
pears in the main display. If you have not en-
tered a title, “NO-TITLE” appears in the title
display instead. For information on how to en-
ter a title, refer to the subsection “Entering
titles” in section “Operations Common to
Each Mode”.
3. Press and hold the [FNC] button for 1 sec-
ond or longer to turn off the power for the
unit.
Note:
• System check
The first time this unit is turned on after the wire
connections are completed, it must be checked
what equipment is connected. When the power is
turned on, “SYSTEM CHCK” and “Push POWER”
appear in the display alternately, so press the
[FNC] button. The system check starts within the
unit. When the system check is complete, press
the [FNC] button again.
Setting the Anti Distortion Filter
The adopted “Liveliness Enhancement Filter”
and “Sound Tone Compensation” functions al-
low well-modulated realistic playback without af-
fecting the characteristics of the original sound
tone.
This unit is provided with 3 types of sound tone
effects stored in memory. Select the one you
prefer.
Selecting a mode
1. Press the [FNC] button to change the opera-
tion mode.
∗ The factory default setting is “ADF OFF”.
2. Each time you press the [FNC] button, the
operation mode changes in the following or-
der:
Each time you press the [ADF] button, the tone
effect changes in the following order:
“ADF-1” ➜ “ADF-2” ➜ “ADF-3” ➜
“ADF OFF” ...
Radio mode ➜ CD/MP3/WMA mode ➜ CD
changer mode ➜ DVD changer mode ➜ TV
mode ➜ AUX mode ➜ Radio mode...
∗ External equipment not connected with
CeNET is not displayed.
• ADF-1
• ADF-2
• ADF-3
: suitable for the genuine speakers
: suitable for separate speakers
: suitable for coaxial speakers
• ADF OFF : no sound effect
12
DXZ746MPDownload from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Notes:
BASS GAIN : –6 to 8 (The factory default
• The volume changes each time the ADF setting is
switched. Turn down the volume and the sub-
woofer volume before performing a switching op-
eration.
• Sufficient effects cannot be obtained with some
speaker systems. In such cases, adjust the vol-
ume.
setting is “0”)
BASS FREQ : 50Hz/80Hz/120Hz (The
factory default setting is
“50”)
BASS Q :
1/1.25/1.5/2 (The factory
default setting is “1”)
4. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the tone
Press the [A-M] button and select the item to
adjust. Each time you press the [A-M] button,
the item changes in the following order:
Adjusting the treble
The treble gain and treble FREQ (center
frequency) can be adjusted as follows.
● When the ADF-1 (ADF-2, ADF-3) is set
“SUB-W VOL” ➜ “BALANCE” ➜
“FADER” ➜ Last function mode...
1. Press the [A-M] button and select “TREB
Å
Î
GAIN ”.
2. Press the [a] or [d] button and select
● When the ADF-OFF is set
Å
Î
“SUB-W VOL” ➜ “BASS GAIN ” ➜
Å
Î
Å
Î
from “TREB GAIN ” ➜ “TREB FREQ
”
Å
Î
“TREB GAIN ” ➜ “BALANCE” ➜ “FADER”
➜ Last function mode…
Å
Î
➜ “TREB GAIN ”...
3. Turn the [ROTARY] knob clockwise or
∗ If subwoofer function is set “ON”, “SUB-W VOL”
can be selected.
counterclockwise as needed and adjust the
gain and the FREQ (center frequency).
TREB GAIN : –6 to 6 (The factory default
Adjusting the subwoofer output
volume
You can adjust the volume output from the
setting is “0”)
TREB FREQ : 8KHz/12KHz (The factory
default setting is “12K”)
unit’s subwoofer output terminal.
4. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
1. Press the [A-M] button and select
“SUB-W VOL”.
2. Turning the [ROTARY] knob clockwise
increases the output volume; turning it
counterclockwise decreases the output
volume.
∗ The factory default setting is “0”. (Setting range:
–6 to 6)
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the balance
1. Press the [A-M] button and select “BAL-
ANCE”.
2. Turning the [ROTARY] knob clockwise
emphasizes the sound from the right
speaker; turning it counterclockwise
emphasizes the sound from the left
speaker.
∗ The factory default setting is “0”. (Adjustment
Adjusting the bass
The bass gain, bass FREQ (center frequency)
and bass Q can be adjusted as follows.
range: L13 to R13)
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
1. Press the [A-M] button and select “BASS
Å
Î
GAIN ”.
2. Press the [a] or [d] button and select from
Adjusting the fader
1. Press the [A-M] button and select “FADER”.
Å
Î
Å
Î
“BASS GAIN ” ➜ “BASS FREQ ” ➜
Å
Î
Å
Î
“BASS
Q
” ➜ “BASS GAIN ”…
2. Turning the [ROTARY] knob clockwise
emphasizes the sound from the front
speakers; turning it counterclockwise
emphasizes the sound from the rear
3. Turn the [ROTARY] knob clockwise or
counterclockwise as needed and adjust the
gain, the FREQ (center frequency) and the
Q.
13
Download from Www.Somanuals.com. All Manuals Search And DownloadD. XZ746MP
Basic Operations
Radio Operations
speakers.
Listening to the radio
1. Press the [FNC] button and select the radio
mode. The frequency in the display.
∗ The factory default setting is “0”. (Adjustment
range: F12 to R12)
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
2. Press the [BND] button and select the radio
band. Each time the button is pressed, the ra-
dio reception band changes in the following
order:
FM1 ➜ FM2 ➜ FM3 ➜AM ➜ FM1...
Adjusting MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust
the low sound area like the normal sound ad-
justment function, but emphasizes the deep
bass sound area to provide you with a dynamic
sound.
3. Press the [a] or [d] button to tune in the
desired station.
Tuning
There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.
∗ The factory default setting is off.
1. Press and hold the [A-M] button for 1 sec-
ond or longer to turn on the MAGNA BASS
EXTEND effect. “M-B EX” lights in the dis-
play.
Seek tuning
1. Press the [BND] button and select the de-
sired band (FM or AM).
2. Press and hold the [A-M] button for 1 second
or longer to turn off the MAGNA BASS EX-
TEND effect. “M-B EX” goes off from the dis-
play.
∗ If “MANU” is lit in the display, press and hold
the [BND] button for 1 second or longer.
“MANU” in the display goes off and seek tun-
ing is now available.
2. Press the [a] or [d] button to automati-
cally seek a station.
When the [d] button is pressed, the station is
sought in the direction of higher frequencies; if
the [a] button is pressed, the station is sought
in the direction of lower frequencies.
Manual tuning
There are 2 ways available: Quick tuning and
step tuning.
When you are in the step tuning mode, the fre-
quency changes one step at a time. In the quick
tuning mode, you can quickly tune the desired
frequency.
1. Press the [BND] button and select the de-
sired band (FM or AM).
∗ If “MANU” is not lit in the display, press and
hold the [BND] button for 1 second or longer.
“MANU” is lit in the display and manual tuning
is now available.
2. Tune into a station.
●Quick tuning:
Press and hold the [a] or [d] button for 1
second or longer to tune in a station.
●Step tuning:
Press the [a] or [d] button to manually
tune in a station.
14
DXZ746MPDownload from Www.Somanuals.com. All Manuals Search And Download.
Radio Operations
Recalling a preset station
Preset scan
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio sta-
tions in memory. Pressing the corresponding
[DIRECT] button recalls the stored radio fre-
quency automatically.
Preset scan receives the stations stored in pre-
set memory in order. This function is useful
when searching for a desired station in memory.
1. Press the [P/A] button.
2. When a desired station is tuned in, press the
[P/A] button again to continue receiving that
station.
1. Press the [BND] button and select the de-
sired band (FM or AM).
2. Press the corresponding [DIRECT] button to
Note:
recall the stored station.
• Be careful not to press and hold the [P/A] button
for 2 seconds or longer, otherwise the auto store
function is engaged and the unit starts storing
stations.
∗ Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store that station
into preset memory.
Instant station recall (ISR)
Manual memory
Instant station recall is a special radio preset
that instantly accesses a favorite radio station at
a touch of a button. The ISR function even oper-
ates with the unit in other modes.
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into preset memory.
●ISR memory
1. Select the station that you wish to store in ISR
memory.
Auto store
Auto store is a function for storing up to 6 sta-
tions that are automatically tuned in sequen-
tially. If 6 receivable stations cannot be received,
a previously stored station remains
unoverwritten at the memory position.
2. Press and hold the [ISR] button for 2 seconds
or longer.
●Recalling a station with ISR
In any mode, press the [ISR] button to turn on
the radio function and tune the selected radio
station. “ISR” appears in the display. Press the
[ISR] button again to return to the previous
mode.
1. Press the [BND] button and select the de-
sired band (FM or AM).
2. Press and hold the [P/A] button for 2 sec-
onds or longer. The stations with good recep-
tion are stored automatically to the preset
channels.
∗ If auto store is performed in the FM bands, the
stations are stored in FM3 even if FM1 or FM2
was chosen for storing stations.
15
Download from Www.Somanuals.com. All Manuals Search And DownloadD. XZ746MP
CD/MP3/WMA Operations
2. Files without MP3/WMA data will not play.
The indication “––:––” appears in the play
time display if you attempt to play files with-
out MP3/WMA data.
MP3/WMA
What is MP3?
MP3 is an audio compression method and clas-
sified into audio layer 3 of MPEG standards.
This audio compression method has penetrated
into PC users and become a standard format.
● Logical format (File system)
1. When writing MP3/WMA file on a CD-R disc
or CD-RW disc, please select “ISO9660 level
1, 2 or JOLIET or Romeo” as the writing soft-
ware format. Normal play may not be possible
if the disc is recorded on another format.
This MP3 features the original audio data com-
pression to about 10 percent of its initial size
with a high sound quality. This means that about
10 music CDs can be recorded on a CD-R disc
or CD-RW disc to allow a long listening time
without having to change CDs.
2. The folder name and file name can be dis-
played as the title during MP3/WMA play but
the title must be within 128 single byte alpha-
betical letters and numerals (including an ex-
tension).
What is WMA?
WMA is the abbreviation of Windows Media Au-
dio, an audio file format developed by Microsoft
Corporation.
3. Do not affix a name to a file inside a folder
having the same name.
● Folder structure
1. A disc with a folder having more than 8 hier-
archical levels will be impossible.
Notes:
• If you play a file with DRM (Digital Rights Man-
agement) for WMA remaining ON, no audio is
output (The WMA indicator blinks).
● Number of files or folders
• Windows Media™, and the Windows ® logo are
trademarks, or registered trademarks of Microsoft
Corporation in the United States and/or other
countries.
1. Up to 255 files can be recognized per folder.
Up to 500 files can be played.
2. Tracks are played in the order that they were
recorded onto a disc. (Tracks might not always
be played in the order displayed on the PC.)
●
To disable DRM (Digital Rights Management):
1. When using Windows Media Player 8, click
on TOOLS ➜ OPTIONS ➜ COPY MUSIC
tab, then under COPY SETTINGS, unclick
the check box for PROTECT CONTENT.
Then, reconstruct files.
3. Some noise may occur depending on the type
of encoder software used while recording.
Multisession function
When a disc contains both normal CD type tracks
and MP3/WMA type tracks mixedly, you can se-
lect which type of the recorded tracks to play.
2. When using Windows Media Player 9, click
on TOOL ➜ OPTIONS ➜ MUSIC RECORD
tab, then under Recording settings, unclick
the Check box for RECORD PROTECTED
MUSIC. Then, reconstruct files.
● Default value is “CD”.
Each time you press and hold the [BND] button
for 1 second or longer, the mixed mode is
switched between CD type or MP3/WMA type.
The following indication appears in the title dis-
play when switching the track type to be played.
Personally constructed WMA files are used
at your own responsibility.
Precautions when creating MP3/WMA disc
● Usable sampling rates and bit rates:
● Display when CD type track is selected:
1. MP3: Sampling rate 11.025 kHz-48 kHz,
Bit rate: 8 kbps-320 kbps / VBR
2. WMA: Bit rate 48 kbps-192 kbps
● File extensions
1. Always add a file extension “.MP3” or
“.WMA” to MP3 or WMA file by using single
byte letters. If you add a file extension other
than specified or forget to add the file exten-
sion , the file cannot be played.
● Display when MP3/WMA type track is se-
lected:
1. Types of recording that can be played are as
follows.
16
DXZ746MPDownload from Www.Somanuals.com. All Manuals Search And Download.
CD/MP3/WMA Operations
Notes:
Setting
Set to CD
Set to MP3/WMA
Disc
• Be sure to close the MOTORIZED FACE after re-
moving the CD.
Mixed with CD and
MP3/WMA type tracks
Play CD
Play MP3/WMA
•
The MOTORIZED FACE closes automatically 30 sec-
onds after removing the CD.
CD type track only Play CD
Play CD
•
If a CD (12 cm) is left in the ejected position for 15
seconds, the CD is automatically reloaded. (Auto re-
load)
MP3/WMA type track only Play MP3/WMA Play MP3/WMA
2. After making these settings, remove the disc
and then reinsert it.
•
•
8 cm CDs are not auto reloaded. Be sure to remove
it when ejected.
If you force a CD into before auto reloading, this can
damage the CD.
3. When a mixed mode CD is loaded and CD is
set, the track to be played first is MP3/WMA
file data and no sound is heard.
Note:
Listening to a disc already loaded
in the unit
Press the [FNC] button to select the CD/MP3/
WMA mode.
• When playing a CCCD (Copy Control CD), set the
setting to CD type. When this is set to MP3/WWA
type, the CD cannot be played normally in some
cases.
When the unit enters the CD/MP3/WMA mode,
play starts automatically.
Disc-In-Play function
If there is no disc loaded, the indication “NO
DISC” appears in the title display.
∗ The mode changes each time the [FNC] button is
pressed. (Modes are not displayed for equipment
As long as the ignition key is turned to the ON or
ACC position, this function allows you to turn the
power to the unit and start playing the disc auto-
matically when the disc is inserted even if the
power is not turned on.
that is not connected.)
Radio
CD/MP3/WMA
(TV)
CAUTION
(CD changer)
• Do not try to put your hand or fingers in the
disc insertion slot. Also never insert for-
eign objects into the slot.
(DVD changer)
AUX
• Do not insert discs where adhesive comes
out from cellophane tape or a rental CD la-
bel, or discs with marks where cellophane
tape or rental CD labels were removed. It
may be impossible to extract these discs
from the unit and they may cause the unit
to break down.
Loading a CD
1. Press the [Q] button. The MOTORIZED
FACE opens.
CAUTION
Be careful not to get your fingers caught
when opening and closing the MOTORIZED
FACE.
Backup Eject function
Just pressing the [Q] button ejects the disc
even if the power to the unit was not turned on.
2. Insert a CD into the center of the insertion
slot with the labeled side facing up. The CD
plays automatically after loading.
1. Press the [Q] button. The MOTORIZED
FACE opens and a CD ejects. “EJECT” ap-
pears in the display.
Notes:
• Never insert foreign objects into the CD insertion
slot.
•
If the CD is not inserted easily, there may be another
CD in the mechanism or the unit may require service.
CAUTION
Be careful not to get your fingers caught
when opening and closing the MOTORIZED
FACE.
• Discs not bearing the
CD-ROMs cannot be played by this unit.
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
or
mark and
2. Remove the CD and press the [Q] button to
close the MOTORIZED FACE.
17
Download from Www.Somanuals.com. All Manuals Search And DownloadD. XZ746MP
CD/MP3/WMA Operations
Loading 8 cm compact discs
∗ No adapter is required to play an 8 cm CD.
Selecting a track
●Track-up
∗
Insert the 8 cm CD into the center of the insertion slot.
1. Press the [d] button to move ahead to the
3. After loading a CD, the MOTORIZED FACE
closes automatically.
Notes:
• Note that MOTORIZED FACE closes immediately
after a CD is inserted into CD insertion slot.
• If no CD is loaded in the MOTORIZED FACE, it
closes after 30 seconds.
beginning of the next track.
2. Each time you press the [d] button, the
track advances ahead to the beginning of the
next track.
●Track-down
1. Press the [a] button to move back to the
beginning of the current track.
2. Press the [a] button twice to move to the
Pausing play
1. Press the [
beginning of the previous track.
] button to pause play.
“PAUSE” appears in the display.
Fast-forward/fast-backward
2. To resume CD play, press the [
again.
] button
●Fast-forward
Press and hold the [d] button for 1 second or
longer.
Displaying CD titles
This unit can display title data for CD-text/MP3/
WMA disc and user titles input with this unit.
●Fast-backward
Press and hold the [a] button for 1 second or
longer.
1. Press the [D] button to display the title.
∗ For MP3/WMA discs, it takes some time until the
start of searching and between tracks. In addition,
the playing time may have a margin of error.
2. Each time you press and hold the [D] button
for 1 second or longer, the title display
changes in the following order:
●CD-TEXT disc
Folder select
This function allows you to select a folder con-
taining MP3/WMA files and start playing from
the first track in the folder.
User title(disc)
(None)
CD-text title (disc)
Artist name
Artist name
CD-text title (track)
CD-text title (track)
CD-text title (disc)
1. Press the [DN] or the [UP] button.
Press the [DN] button to move the previous
folder.
User title(disc)
(None)
Press the [UP] button to move the next folder.
● MP3/WMA disc
1
Folder
File
File
Album TAG
Album TAG
Artist TAG
Root folder
Artist TAG
Title TAG
Title TAG
Folder
Folder
File
2
Notes:
• If the CD playing is not a CD-text CD or no user
title has been input, “NO-TITLE” appears in the
display.
• If MP3/WMA disc is not input TAG, “NO-TAG” ap-
pears in the display.
• For MP3, supports ID3 Tags V2.3 / 2.2 / 1.1 / 1.0.
• Tag displays give priority to V2.3 / 2.2
3
4
• In the case of album Tags for WMA, the informa-
tion written into the extension header is displayed.
• Only ASCII characters can be displayed in Tags.
5
18
DXZ746MPDownload from Www.Somanuals.com. All Manuals Search And Download.
CD/MP3/WMA Operations
∗ Press the [UP] button while in the final folder
Repeat play
to shift to the first folder.
This function allows you to play the current track
repeatedly.
∗ Folder without an MP3/WMA file is not select-
able.
1. Press the [RPT] button to perform repeat play.
2. To select a track, press the [a] or [d] but-
The indication “RPT” lights up in the display
and “TRK REPEAT” (or “ -REPEAT” when
performing repeated play for a track in the
MP3/WMA file) appears for about 2 seconds
in the title display, and then repeat play starts.
ton.
Top function
The top function resets the CD player to the first
track of the disc. Press the [BND] button to play
the first track (track No. 1) on the disc.
∗ In case of MP3/WMA, the first track of a folder be-
ing played will be returned.
2. To cancel repeat play, press the [RPT] button
again.
The play status display such as “RPT” disap-
pears from the display and normal play re-
sumes from the track currently being played.
Scan play
This function allows you to locate and play the
first 10 seconds of all the tracks recorded on a
disc.
Folder repeat play
This function allows you to play a track currently
being played in the MP3/WMA folder repeatedly.
1. Press the [SCN] button to perform scan play.
The indication “SCN” lights up in the display,
and “TRK SCAN” (or “ -SCAN” when
searching for a track in the MP3/WMA file)
appears in the title display for about 2 sec-
onds, then scan play starts.
1. Press and hold the [RPT] button for 1 second
or longer to perform folder repeat play.
The indications “FOLDER” and “RPT” light
up in the display and “ -REPEAT” appears
for about 2 seconds in the title display, and
then folder repeat play starts.
∗ Scan play starts from the next track after the
track currently being played.
2. To cancel folder repeat play, press the [RPT]
2. To cancel scan play, press the [SCN] button
button again.
again.
The play status indications such “FOLDER”
and “RPT” disappear from the display and
normal play resumes from the track currently
being played.
The play status indication such as “SCN” dis-
appears from the display and the current
track is played.
Folder scan play
Random play
This function allows you to locate and play the
first 10 seconds of the first track of all the fold-
ers on an MP3/WMA disc.
This function allows you to play all tracks re-
corded on a disc in a random order.
1. Press the [RDM] button to perform random
1. Press and hold the [SCN] button for 1 sec-
play.
ond or longer to perform to folder scan play.
The indication “RDM” lights up in the display
and “TRK RANDOM” (or “ -RANDOM” when
performing random play for tracks on a MP3/
WMA disc) appears in the title display for about
2 seconds, and then random play starts. The
tracks on the disc are then played in a random
order.
The indications “FOLDER” and “SCN” light
up in the display and “ -SCAN” appears for
about 2 seconds in the title display, and then
folder scan play starts.
∗ Folder scan play starts from the next track af-
ter the track currently being played.
2. To cancel folder scan play, press the [SCN]
2. To cancel random play, press the [RDM] but-
button again.
ton again.
The play status indications such as
“FOLDER” and “SCN” disappear from the
display and the current track is played.
The play status indication such as “RDM”
disappears from the display and normal play
resumes from the track currently being
played.
19
Download from Www.Somanuals.com. All Manuals Search And DownloadD. XZ746MP
CD/MP3/WMA Operations
Notes:
Folder random play
• When writing to a CD-R/RW, etc., be sure to use
alphanumeric/ASCII characters.
• Up to 5 layers can be recognized as a list. For
written play lists, latest 5 lists are recognized in
the order in which they are written.
• When writing to a CD-R/RW, etc., turn off the Disc
At Once function.
• When adding a play list, it is recommended to
This function allows you to play all the tracks of
all the folders recorded on an MP3/WMA disc in
a random order.
1. Press and hold the [RDM] button for 1 sec-
ond or longer to perform folder random play.
The indications “FOLDER” and “RDM” light
up in the display and “ -RANDOM” appear
in the title display for about 2 seconds, and
then folder random play starts.
write it in the “Root” folder.
2. To cancel folder random play, press the
[RDM] button again.
The play status indications such as
“FOLDER” and “RDM” disappear from the
display and normal play resumes from the
track currently being played.
Play list mode
This function allows you to play tracks, up to lat-
est 5 time stamps, by reading the play list infor-
mation written on the disc.
1. Press and hold the [PLAY LIST] button for 1
second or longer to turn on or off the play list
mode.
∗ Play list play is possible only when there is a
file whose extension is “.M3U” on the CD-R/
RW.
∗ Up to 5 play lists can be recognized, and up to
255 files can be recognized per play list.
2. Press the [a] or [d] button to change the
track.
3. Press the [DN] button to move to the previ-
ous play list.
Press the [UP] button to move to the next
play list.
Notes:
• The SCN/RPT/RDM functions cannot be used
while in the play list mode.
• The title display changes from folder name to play
list name.
Making a play list
1. Write desired tracks to a CD-R/RW, etc. Be
sure to use alphanumeric/ASCII characters
for all file names.
2. Make a play list by using a multimedia
player, etc. and save the data. The file format
must be M3U.
3. Again, write this play list to the CD-R/RW,
etc.
20
DXZ746MPDownload from Www.Somanuals.com. All Manuals Search And Download.
Different pieces of music heard by plural listeners (2-ZONE function)
2. Press the [FNC] button to select a source in
About the 2-ZONE function
the control zone.
Every time the button is pressed, the follow-
ings appear in turn.
The 2-ZONE function is a function that outputs
separate sounds from the MAIN zone and SUB
zone by simultaneously operating two sources
●For a source group included in this
unit:
in the one center unit, thereby allowing plural lis-
teners to enjoy separate music sources.
Radio ➜ CD/MP3 ➜ AUX ➜ Radio...
This unit can control its internal sources (radio,
CD, MP3, etc.) to play back them, and further,
can simultaneously play back sources from ex-
ternal equipment connected via CeNET (for in-
stance, CD changers etc.).
●For a source group in external equip-
ment:
AUX ➜ CD changer ➜ DVD changer ➜ TV
➜ AUX...
The sources of the MAIN zone are played back
from the speakers of the vehicle side, and those
of the SUB zone are from the headphone sys-
tems (WH104/WH204).
∗ The name of equipment that is not connected
to this unit is not displayed.
• To change a current musical performance etc., press
the button that controls the selected source ([SCN]
button, etc.).
Notes:
• Except AUX, the MAIN and SUB zones cannot si-
multaneously use sources inside this unit.
Also, external equipment connected via CeNET
cannot simultaneously be used.
• The TV mode while the 2-ZONE function is tuned
on is forced to change to “VTR playback.”
• The ISR function cannot be operated when the 2-
ZONE function is turned on.
• The Audio mode and ADF function cannot be set
for the sources of the SUB zone.
● Example for source change
Oparation
MAIN zone
SUB zone
2-ZONE
turned off
Radio playback
Radio playback
2-ZONE
Radio playback
Radio playback
AUX
turned on
2-ZONE
turned off
Radio playback
• If any of following external equipment is con-
nected, this function is disenabled.
Source
change
External
equipment (CD
changer)
External
equipment (CD
changer)
• 5.1 channel surround decoder (DVH920/
DVH940)
2-ZONE
turned on
External
equipment (CD
changer)
Radio playback
Setting the 2-ZONE function
The initial setting is “OFF”.
When you have set the 2-ZONE function to
“ON” in the initial state, the MAIN zone services
for sources inside this unit and the SUB zone,
for AUX. Changing a source during later use
causes the latest heard source to be invoked.
Adjusting the sound level for the
MAIN zone
You can adjust the sound level only for the MAIN
zone. To adjust the sound level for the SUB zone,
adjust it in the headphone (WH104/WH204) side.
Press and hold the [ ] button for 1 second or
longer to turn on or off. When the 2-ZONE func-
tion is turned on, “2-ZONE ON” on the display
lights.
Turn the [ROTARY] knob to adjust the sound
level for the MAIN zone.
Counterchanging the sources of
the MAIN and SUB zones
You can supersede the music sources of the
MAIN and SUB zones.
Switching sources
1. Press the [ ] button to select the control
zone (“MAIN” or “SUB”).
Press and hold the [ISR] button for 1 second or
longer to counterchange the sources of the
MAIN and SUB zones.
Every time the button is pressed, the “MAIN
ZONE” changes to the “SUB ZONE” or vice
versa.
“MAIN” or “SUB” on the display lights at that
time, thereby indicating that the relevant
zone becomes ready to operate.
“REVERSE” is displayed for 2 seconds on the
display.
21
Download from Www.Somanuals.com. All Manuals Search And DownloadD. XZ746MP
Operations Common to Each Mode
7. Turn the [ROTARY] knob clockwise or coun-
Turning the screen saver function
on or off
This unit is provided with the screen saver func-
tion which allows you to show various kinds of
patterns and characters in the Operation Status
indication area of the display in a random order.
You can turn on and off this function.
terclockwise to select the desired character.
8. Repeat step 5 to 7 to enter up to 30 charac-
ters for message.
9. Press and hold the [
] button for 2 sec-
onds or longer to store the message in
memory and cancel input message.
10.Press the [T] button to return to the previous
If the button operation is performed with the
screen saver function on, the operation display
corresponding to the button operation is shown
for about 30 seconds and the display returns to
the screen saver display.
mode.
Message display
When the unit is powered on or off, a message
is displayed. The user can turn this message
display ON or OFF.
∗ The factory default setting is “RANDOM”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
deisplay.
∗ The factory default setting is “ON”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button to select
Å
Î
“ SCRN SVR
PUSH ENT”.
2. Press the [a] or [d] button to select
3. Press the [ ] button.
Å
Î
“ MESSAGE ”.
4. Turn the [ROTARY] knob clockwise or coun-
terclockwise to select the setting. Each time
you turn the [ROTARY] knob, the setting
changes in the following order:
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise to set the message display “ON”
or “OFF”.
4. Press the [T] button to return to the previous
Å
Î
Å
Î
“
OFF ” ➜ “ Pattern-1 ” ➜
mode.
Å
Î
Å
Î
“ Pattern-2 ” ➜ “ Pattern-3 ” ➜
Å
Î
Å
Î
“
MESSAGE ” ➜ “ RANDOM ”
5. Press the [T] button to return to the previous
Setting the method for title scroll
Set how to scroll in CD-TEXT or MP3/WMA.
∗ The factory default setting is “ON”.
mode.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
Entering MESSAGE INFORMATION
Message up to 30 characters long can be stored
in memory and displayed for CD, CD changer
and TV stations.
2. Press the [a] or [d] button to select
Å
Î
“ AUTO SCRL ”.
∗ The factory default setting is “Welcome to Clarion”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise and select “ON” or “OFF”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
● ON:
2. Press the [a] or [d] button to select
To scroll automatically.
● OFF:
Å
Î
“ MSG INPUT
PUSH ENT”.
To scroll just 1 time when the title was
changed or the title key was pressed.
3. Press the [ ] button.
4. Press the [BND] button to clear the old mes-
4. Press the [T] button to return to the previous
sage.
mode.
5. Press the [a] or [d] button to move the
cursor.
6. Press the [D] button to select a character.
Each time you press the [D] button, the char-
acter changes in the following orders:
Capital letters ➜ Small letters ➜ Numbers/
Symbols ➜ Umlaut ➜ Capital letters...
22
DXZ746MPDownload from Www.Somanuals.com. All Manuals Search And Download.
Operations Common to Each Mode
Dimmer level
You can adjust the reduced illumination level of
the dimmer.
Setting the Subwoofer
You can set the subwoofer on or off.
∗ The factory default setting is “ON”.
∗ The factory default setting is “LV3”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
(Adjustment range is LV1 to LV5)
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button and select
Å
“
Î
SUB-W
”.
2. Press the [a] or [d] button to select the
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise and select “ON” or “OFF”.
Å
Î
“ DIMMER LV ”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise to adjust the reduced illumina-
tion level of the dimmer.
4. Press the [T] button to return to the previous
mode.
● LV1 to LV5:
Setting LOW PASS FILTER
The dimmer operation is performed depend-
ing on the set level LV1 to LV5.
∗ The factory default setting is “THRGH” (Through).
∗ If subwoofer function is set “ON”, “LOW PASS FIL-
TER” can be selected.
● OFF:
No dimmer operation is performed.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
4. Press the [T] button to return to the previous
mode.
2. Press the [a] or [d] button and select
Å
Î
Adjusting the display contrast
You can adjust the display contrast to match the
angle of installation of the unit.
∗ The factory default setting is “8”. (Adjustment level:
1 to 18)
“ SUB-W LPF ”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise to select the setting. Each time
you turn the [ROTARY] knob, the setting
changes in the following order:
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
THRGH ➜ 50Hz ➜ 80Hz ➜ 120Hz
4. Press the [T] button to return to the previous
mode.
2. Press the [a] or [d] button to select
Å
Î
“ CONTRAST ”.
Setting the external amplifier
3. Turn the [ROTARY] knob clockwise or coun-
∗ The factory default setting is “OFF”.
terclockwise to adjust the contrast.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
4. Press the [T] button to return to the previous
mode.
2. Press the [a] or [d] button and select
Å
Î
Anti-theft indicator
“ AMP-CANCL ”.
The red Anti-theft indicator is a function for pre-
venting theft. When the DCP is removed from
the unit, this indicator blinks.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise and select “ON” or “OFF”.
● ON:
∗ The factory default setting is “OFF”.
Use with connected AMP.
● OFF:
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
Use with inside AMP.
4. Press the [T] button to return to the previous
2. Press the [a] or [d] button and select
Å
Î
mode.
“ BLINK LED ”.
3. Turn the [ROTARY] knob clockwise to set
this function “ON” or turn it counterclockwise
to switch this function “OFF”.
4. Press the [T] button to return to the previous
mode.
23
Download from Www.Somanuals.com. All Manuals Search And DownloadD. XZ746MP
Operations Common to Each Mode
Note:
AUX function
This system has an external input jack so you
can listen to sounds and music from external
devices connected to this unit.
• You cannot set the clock when it is displayed with
only the ignition on. If you drain or remove the
car’s battery or take out this unit, the clock is reset.
While setting the clock, if another button or opera-
tion is selected, the clock set mode is canceled.
Selecting AUX IN sensitivity
Make the following settings to select the sensi-
tivity when sounds from external devices con-
nected to this unit are difficult to hear even after
adjusting the volume.
Setting the button illumination
Press the [COLOR] button to select a color
type. Each time you press the [COLOR] button,
the type changes in the following orders:
COLOR SCAN ➜ Indigo Blue ➜ Surf Blue ➜
Silky White ➜ Aqua Green ➜ Fresh Green ➜
Leaf Green ➜ Warm Amber ➜ Passion Red
➜ Vivid Pink ➜ Pale Pink ➜ Dark Violet ➜
Pure Purple ➜ USER COLOR 1 ➜ USER
COLOR 2 ➜ USER COLOR 3 ➜ COLOR
SCAN ...
∗ The factory default setting is “MID”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button to select
Å
Î
“ AUX SENS ”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise as needed and select from
“HIGH”, “MID” or “LOW”.
●Setting COLOR SCAN mode
As selecting “COLOR SCAN”, the color auto-
matically changes.
∗ The factory default setting is “COLOR SCAN”.
∗ After 3 seconds the color changes to the other.
●Setting USER mode
4. Press the [T] button to return to the previous
mode.
Triggered audio mute for cellular
Î
Î
Î
The factory default setting is “R 8 G 8 B 8”
telepones
This unit requires special wiring to mute the au-
dio signal automatically when a cellular tele-
phone rings in the car.
∗ This function is not compatible with all cellular
telepones Contact your local authorized Clarion
dealer for information on proper installation and
compatibility.
(R:red, G:green, B:blue).
As selecting “USER COLOR 1, 2, 3”, press and
hold the [COLOR] button for 1 second or longer
Î
Î
Î
“R 8 G 8 B 8” appears in the display.
1. Press the [a] or [d] button to move the cursor.
2. Turn the [ROTARY] knob to select from 0 to 8.
3. Press and hold the [
] button for 2 sec-
onds or longer to store the color in memory
and cancel setting mode.
Setting the clock
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
COLOR
R
0
0
6
0
0
4
8
8
8
8
3
8
8
8
8
G
1
4
8
8
8
8
3
0
0
1
0
0
8
8
8
B
8
8
8
2
0
0
0
0
3
3
8
8
8
8
8
Indigo Blue
Surf Blue
2. Press the [a] or [d] button to select
Silky White
Aqua Green
Fresh Green
Leaf Green
Warm Amber
Passion Red
Vivid Pink
Å
Î
“ CLOCK
PUSH ENT”.
3. Press the [ ] button.
4. Press the [a] or [d] button to select the
hour or the minute.
5. Turn the [ROTARY] knob clockwise or coun-
terclockwise to set the correct time.
∗ The clock is displayed in 12-hour format.
Pale Pink
6. Press the [
memory.
] button to store the time into
Dark Violet
Pure Purple
USER COLOR 1
USER COLOR 2
USER COLOR 3
7. Press the [T] button to return to the previous
mode.
24
DXZ746MPDownload from Www.Somanuals.com. All Manuals Search And Download.
Operations Common to Each Mode
Entering titles
Clearing titles
Titles up to 10 characters long can be stored in
memory and displayed for Radio, CD, CD
changer, tuner station and TV stations. The
number of titles that can be entered for each
mode are as follows.
1. Select and play a CD in the CD changer or
tune in to a TV station for which you want to
clear the title.
2. Press the [D] button and display the main.
3. Press the [T] button.
The display switches to the title input display.
Mode
Number of titles
50 titles
CD mode
TV mode
TUNER mode
4. Press the [BND] button.
20 titles
5. Press and hold the [
] button for 2 sec-
30 titles
ond or longer to clear the title and cancel title
input mode.
CD changer mode
DCZ625 connected
CDC655Tz connected
CDC1255z connected
Number of titles
100 titles
100 titles
50 titles
1. Press the [FNC] button to select the mode
you want to enter a title (tuner, CD, CD
changer or TV).
2. Select and play a CD in the CD changer or
tune in to a TV station for which you want to
enter the title.
3. Press the [D] button and display the main.
4. Press the [T] button.
5. Press the [a] or [d] button to move the
cursor.
6. Press the [D] button to select a character.
Each time you press the [D] button, the char-
acter changes in the following order:
Capital letters ➜ Small letters ➜ Numbers/
Symbols ➜ Umlaut ➜ Capital letters...
7. Turn the [ROTARY] knob to select the de-
sired character.
8. Repeat steps 5 to 7 to enter up to 8 charac-
ters for the title.
9. Press and hold the [
] button for 2 sec-
onds or longer to store the title into memory
and cancel title input mode.
25
Download from Www.Somanuals.com. All Manuals Search And DownloadD. XZ746MP
8. OPERATIONS OF ACCESSORIES
CD Changer Operations
CD changer functions
User title(disc)
(None)
CD-text title (disc)
Artist name
When an optional CD changer is connected
through the CeNET cable, this unit controls all
CD changer functions. This unit can control a to-
tal of 2 changers.
Artist name
CD-text title (track)
CD-text title (track)
CD-text title (disc)
User title(disc)
(None)
Press the [FNC] button and select the CD
changer mode to start play. If 2 CD changers
are connected, press the [FNC] button to select
the CD changer for play.
∗ If “NO MAGAZINE” appears in the display, insert
the magazine into the CD changer. “DISC CHECK”
appears in the display while the player loads
(checks) the magazine.
Notes:
• If the CD playing is not a CD-text CD or no user
title has been input, “NO-TITLE” appears in the
display.
• If a CD-text CD is not input its disc title or a track
title, “NO-TITLE” appears in the display.
∗ If “NO DISC” appears in the display, eject the maga-
zine and insert discs into each slot. Then, reinsert
the magazine back into the CD changer.
Procedure to scroll a title
Set “AUTO SCROLL” to “ON” or “OFF”.
Note:
(The factory default setting is “ON”. Refer to the
subsection “Turning the screen saver function
on or off” in section “Operation Common to
Each Mode”.)
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
CAUTION
CD-ROM discs cannot be played from every
CD changer, it’s depended on the model.
●When set to “ON”
The title is automatically kept scrolling.
●When set to “OFF”
Pausing play
1. Press the [
To scroll just 1 time when the title was changed
or the [T] button was pressed.
] button to pause play.
“PAUSE” appears in the display.
2. To resume play, press the [
] button again.
Selecting a CD
Press the [DN] or the [UP] button to select the
desired disc.
∗ If a CD is not loaded in a slot of magazine, pressing
the [UP] or the [DN] button cannot work.
Displaying CD titles
This unit can display title data for CD-text CDs
and user titles input with this unit.
∗ Title data for CD-text CDs can be displayed with
this unit only when it is connected to CDC655Tz.
Selecting a track
●When connected to DCZ625 or CDC1255z.
Press the [D] button to display the title.
●When connected to CDC655Tz
●Track-up
1. Press the [d] button to move ahead to the
beginning of the next track.
1. Press the [D] button to display the title.
2. Each time you press the [d] button, the
track advances ahead to the beginning of the
next track.
2. Each time you press and hold the [D] button
for 1 second or longer, the title display
changes in the following order:
●Track-down
1. Press the [a] button to move back to the
beginning of the current track.
2. Press the [a] button twice to move to the
beginning of the previous track.
26
DXZ746MPDownload from Www.Somanuals.com. All Manuals Search And Download.
CD Changer Operations
Disc repeat play
After all the tracks on the current disc have
been played, disc repeat play automatically re-
plays the current disc over from the first track.
This function continues automatically until it is
cancelled.
Fast-forward/fast-backward
●Fast-forward
Press and hold the [d] button for 1 second or
longer.
●Fast-backward
Press and hold the [a] button for 1 second or
1. Press and hold the [RPT] button for 1 second
or longer. “DISC” and “RPT” light in the dis-
play and disc repeat play starts.
longer.
Scan play
Scan play locates and plays the first 10 seconds
of each track on a disc automatically. This func-
tion continues on the disc until it is cancelled.
2. To cancel disc repeat play, press the [RPT]
button again. “DISC” and “RPT” go off from
the display and normal play resumes on the
current track.
∗ The scan play is useful when you want to select a
desired track.
Random play
1. Press the [SCN] button to start track scan-
ning. “SCN” lights in the display.
Random play selects and plays individual tracks
on the disc in no particular order. This function
continues automatically until it is cancelled.
2. To cancel the scan play, press the [SCN] but-
ton again. “SCN” goes off from the display
and the current track continues to play.
1. Press the [RDM] button. “RDM” lights in the
display and random play begins.
2. To cancel random play, press the [RDM] but-
ton again. “RDM” goes off from the display
and normal play resumes.
Disc scan play
Disc scan play locates and plays the first 10
seconds of the first track on each disc in the
currently selected CD changer. This function
continues automatically until it is cancelled.
Disc random play
The disc random play selects and plays indi-
vidual tracks or discs automatically in no par-
ticular order. This function continues automati-
cally until it is cancelled.
∗ Disc scan play is useful when you want to select a
desired CD.
1. Press and hold the [SCN] button for 1 sec-
ond or longer. “DISC” and “SCN” light in the
display and disc scan play starts.
1. Press and hold the [RDM] button for 1 sec-
ond or longer. “DISC” and “RDM” light in the
display and disc random play starts.
2. To cancel disc scan play, press the [SCN] but-
ton again. “DISC” and “SCN” go off from the
display and the current track continues to
play.
2. To cancel disc random play, press the [RDM]
button again. “DISC” and “RDM” go off from
the display and normal play resumes from
the current track.
Repeat play
Repeat play continuously plays the current
track. This function continues automatically until
it is cancelled.
1. Press the [RPT] button. “RPT” lights in the
display and the current track is repeated.
2. To cancel repeat play, press the [RPT] button
again. “RPT” goes off from the display and
normal play resumes.
27
Download from Www.Somanuals.com. All Manuals Search And DownloadD. XZ746MP
TV Operations
TV tuner functions
Manual tuning
When an optional TV tuner is connected through
the CeNET cable, this unit controls all TV tuner
functions. To watch TV requires a TV tuner and
monitor.
There are 2 ways available: Quick tuning and
step tuning.
When you are in the step tuning mode, the fre-
quency changes one step at a time. In the quick
tuning mode, you can quickly tune the desired
frequency.
Watching a TV
1. Press the [FNC] button and select the TV
1. Press the [BND] button and select the de-
sired band (TV1 or TV2).
mode.
∗ If “MANU” is not lit in the display, press and
hold the [BND] button for 1 second or longer.
“MANU” lights in the display and manual tun-
ing is now available.
2. Press the [BND] button to select the desired
TV band (TV1 or TV2). Each time the button
is pressed, the input selection toggles be-
tween TV1 and TV2.
2. Tune into a station.
3. Press the [a] or [d] button to tune in the
●Quick tuning:
desired TV station.
Press and hold the [a] or [d] button for 1
second or longer to tune in a station.
Watching a video
●Step tuning:
The TV tuner has a VTR input terminal to which
1 external device can be connected. Connect a
12 V video cassette player (VCP) or video cas-
sette recorder (VCR) to the TV tuner input termi-
nal.
Press the [a] or [d] button to manually
tune in a station.
Recalling a preset station
A total of 12 TV stations can be stored (6-TV1
and 6-TV2). This allows you to select your favor-
ite TV stations and store them in memory for
later recall.
1. Press the [
2. To return to the TV broadcast, press the
] button.
] button to select VTR.
[
1. Press the [BND] button and select the de-
Tuning
sired TV band (TV1 or TV2).
There are 3 types of tuning mode available,
Seek tuning, manual tuning and preset tuning.
2. To recall a stored TV station, press the de-
sired [DIRECT] button to select that station.
∗ Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into preset memory.
Seek tuning
1. Press the [BND] button and select the de-
sired TV band (TV1 or TV2).
Manual memory
∗ If “MANU” is lit in the display, press and hold
the [BND] button for 1 second or longer.
“MANU” in the display goes off and seek tun-
ing is now available.
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press and hold one of [DIRECT] buttons for
2 seconds or longer to store the current sta-
tion into preset memory.
2. Press the [a] or [d] button to automati-
cally seek a station. Press the [d] button to
automatically tune up the frequency band to
the next available TV station; press the [a]
button to automatically tune down.
28
DXZ746MPDownload from Www.Somanuals.com. All Manuals Search And Download.
TV Operations
Î
Auto store
Auto store selects 6 TV stations automatically
and stores each one into preset memory.
Setting the TV diver
You can change the reception setting for the TV
antenna connected to the TV tuner.
If there are not 6 stations with good reception,
stations previously stored in memory remain
and only the strong stations are stored into
memory.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button to select
Å
Î
1. Press the [BND] button and select the de-
“ TV DIVER ”.
sired TV band (TV1 or TV2).
3. Turn the [ROTARY] knob clockwise to set to
“ON” or counterclockwise to set to “OFF”.
2. Press and hold the [P/A] button for 2 sec-
onds or longer. The stations with good recep-
tion are stored automatically to the preset
channels.
● ON:
Sets reception emphasizing the visual.
● OFF:
Sets the diver setting to OFF.
Preset scan
4. Press the [T] button to return to the previous
Preset scan allows the user to view each preset
position before it automatically advances to the
next preset. This function is useful for searching
for a desired TV station in memory.
mode.
1. Press the [P/A] button.
2. When the desired station is found, press the
[P/A] button again to remain tuned to that
station.
Note:
• Do not press and hold the [P/A] button for 2 sec-
onds or longer. Doing so will trigger the auto store
function and start storing stations into memory.
Setting the TV area
When you select the TV area (TV reception
area), the TV tuner area setting changes.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button to select
Å
Î
“ TV AREA
”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise to select the reception area.
4. Press the [T] button to return to the previous
mode.
29
Download from Www.Somanuals.com. All Manuals Search And DownloadD. XZ746MP
Connect with 5.1ch Surround Decoder (DVH920/DVH940)
■ DVH920
SET and 5.1ch Surround Decoder connect wth
RCA pin cable
BB TV Tuner
(TTX7501z/TTX7502z
TV MONITOR
/TTX7504z)
CeNET DVD Changer
(VCZ625)
Gray
1-DIN Center Unit
(DXZ746MP)
CeNET Cable (furnished with
component to be connected)
∗ Refer to the OWNER’S MANUAL of DVH920.
Connect to 4ch power
amplifier
5.1ch surround
decoder
(DVH920)
Connect to powered
center speaker
Connect to powered
sub-woofer
RCA pin cable (furnished with DVH920)
ANALOG INPUT
Black
Optical Digital cable (sold separately)
DCA-005 (5 m) (furnished with DVH920)
DCA-008 (1.5 m)
∗ Connect properly in accordance withcolor of connectors
Set the 5.1ch surround decoder’s
[STAND-ALONE / SLAVE] switch tothe
[STAND-ALONE] position.
STAND
SLAVE
ALONE
30
DXZ746MPDownload from Www.Somanuals.com. All Manuals Search And Download.
Connect with 5.1ch Surround Decoder (DVH920/DVH940)
■ DVH940
SET and 5.1ch Surround Decoder connect wth
RCA pin cable
BB TV Tuner
(TTX7501z/TTX7502z
/TTX7504z)
TV MONITOR
CeNET DVD Changer
(VCZ625)
Gray
1-DIN Center Unit
(DXZ746MP)
CeNET Cable (furnished with
component to be connected)
∗ Refer to the OWNER’S MANUAL of DVH940.
Connect to 4ch power
amplifier
5.1ch surround
decoder
(DVH940)
Connect to powered
center speaker
Connect to powered
sub-woofer
Black
RCA pin cable (furnished with DVH940)
ANALOG INPUT
Optical Digital cable (sold separately)
DCA-005 (5 m) (furnished with DVH940)
DCA-008 (1.5 m)
∗ Connect properly in accordance withcolor of connectors
Set the 5.1ch surround decoder’s
[STAND-ALONE / SLAVE] switch tothe
[SLAVE] position.
STAND
SLAVE
ALONE
31
Download from Www.Somanuals.com. All Manuals Search And DownloadD. XZ746MP
9. IN CASE OF DIFFICULTY
Problem
Cause
Fuse is blown.
Measure
Power does not
turn on.
Replace with a fuse of the same amperage. If the
fuse blows again, consult your store of purchase.
(No sound is
produced.)
Incorrect wiring.
Consult your store of purchase.
No sound output Power antenna lead is
1. Turn the unit off.
when operating
the unit with
amplifiers or
power antenna
attached.
shorted to ground or
2. Remove all wires attached to the power antenna
lead. Check each wire for a possible short to
ground using an ohm meter.
excessive current is required
for remote-on the amplifiers
or power antenna.
3. Turn the unit back on.
4. Reconnect each amplifier remote wire to the
power antenna lead one by one. If the amplifiers
turn off before all wires are attached, use an
external relay to provide remote-on voltage
(excessive current required).
Turn off the power, then
Nothing happens The microprocessor has
when buttons are malfunctioned due to noise,
Reset button
press the [RELEASE]
button and remove the DCP.
Press the reset button for
about 2 seconds with a thin
rod.
pressed.
etc.
Display is not
accurate.
DCP or main unit connectors Wipe the dirt off with a soft cloth moistened with
are dirty. cleaning alcohol.
No sound heard. The speaker protection circuit 1. Turn down sound volume. Function can also be
is operating.
restored by turning the power off and on again.
(Speaker volume is reduced automatically when
the speaker protection circuit operates).
2. If the sound is muted again, consult our service
department.
No sound heard. MP3/WMA files are absent
in a disc.
Write MP3/WMA files onto the disc properly.
Files are not recognized as
an MP3/WMA file.
Use MP3/WMA files encoded properly.
File system is not correct.
Use ISO9660 level 1, 2 or JOLIET or Romeo file system.
Clean the disc with a soft cloth.
Sound skips or is Disc is dirty.
noisy.
Disc is heavily scratched or
warped.
Replace with a disc with no scratches.
Sound is cut or
skipped.
MP3/WMA files are not
encoded properly.
Use MP3/WMA files encoded properly.
Noise is
generated or
noise is mixed
with sound.
32
DXZ746MPDownload from Www.Somanuals.com. All Manuals Search And Download.
Problem
Cause
Measure
Sound is bad
directly after
power is turned
on.
Water droplets may form on
the internal lens when the
car is parked in a humid
place.
Let dry for about 1 hour with the power on.
Wrong filename
File system is not correct.
Use ISO9660 level 1, 2 or JOLIET or Romeo file
system.
Play list play is
not performed.
File name or extension is not Use alphanumeric/ASCII characters for MP3/WMA
correct.
file name.
Use “.M3U” for the file extension of a play list.
33
Download from Www.Somanuals.com. All Manuals Search And DownloadD. XZ746MP
10. ERROR DISPLAYS
If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
Error Display
ERROR 2
Cause
Measure
A CD is caught inside the CD deck and is
not ejected.
This is a failure of CD deck’s mechanism and
consult your store of purchase.
ERROR 3
ERROR 6
ERROR 2
ERROR 3
ERROR 6
ERROR 2
ERROR 3
ERROR 6
A CD cannot be played due to scratches,
etc.
Replace with a non-scratched,
non-warped-disc.
A CD is loaded upside-down inside the CD
deck and does not play.
Eject the disc then reload it properly.
A CD inside the CD changer is not loaded.
This is a failure of CD changer’s mechanism
and consult your store of purchase.
A CD inside the CD changer cannot be
played due to scratches, etc.
Replace with a non-scratched, non-warped
disc.
A CD inside the CD changer cannot be
played because it is loaded upside-down.
Eject the disc then reload it properly.
A DISC inside the DVD changer cannot be
played.
This is a failure of DVD mechanism and con-
sult your store of purchase.
A DISC cannot be played due to scratches,
etc.
Retry or replace with a non-scratched, non-
warped-disc.
A DISC inside the DVD changer cannot be
played because it is loaded upside-down.
Eject the disc then reload it properly
Set the correct Parental level.
ERROR P
ERROR R
Parental level error
Region code error
Eject the disc and replace correct region
code disc.
AMP GUARD
The speaker protection circuit is operating.
During this operation, if any volume
operation is performed, the display shows
“AMP GUARD”.
1. Turn down sound volume. Function can
also be restored by turning the power off
and on again.
(Speaker volume is reduced automatically
when the speaker protection circuit oper-
ates).
2. If the sound is muted again, consult our
service department.
If an error display other than the ones described above appears, press the reset button. If the problem
persists, turn off the power and consult your store of purchase.
34
DXZ746MPDownload from Www.Somanuals.com. All Manuals Search And Download.
11. SPECIFICATIONS
FM Tuner
Frequency Range:
Audio
Maximum Power Output:
87.0 MHz to 108.0 MHz
212 W (53 W ✕ 4 ch)
Usable Sensitivity:
9 dBf
Continuous Average Power Output:
18 W ✕ 4, into 4 Ω, 20 Hz to 20 kHz, 1%THD
50dB Quieting Sensitivity:
15 dBf
Bass Control Action (50 Hz/80 Hz/120 Hz):
+16 dB, –12 dB
Alternate Channel Selectivity:
70 dB
Treble Control Action (8 kHz/12 kHz):
12 dB
Stereo Separation (1 kHz):
35 dB
Line Output Level (CD 1 kHz):
4 V
Frequency Response ( 3 dB):
30 Hz to 15 kHz
General
Power Supply Voltage:
AM Tuner
Frequency Range:
14.4 V DC (10.8 to 15.6 V allowable), negative
ground
531 kHz to 1629 kHz
Current Consumption:
Less than 15 A
Usable Sensitivity:
25 µV
Speaker Impedance:
4 Ω (4 Ω to 8 Ω allowable)
CD Player
System:
Weight / Source unit:
2.75 lb. (1.6 kg)
Compact disc digital audio system
Weight / Remote control unit:
1 oz. (30 g) (including battery)
Usable Discs:
Compact disc
Dimensions / Source unit:
7" (Width) ✕ 2" (Height) ✕ 6-1/8" (Depth)
[178 (W) ✕ 50 (H) ✕ 155 (D) mm]
Frequency Response ( 1 dB):
5 Hz to 20 kHz
Dimensions / Remote control unit:
1-3/4" (Width) ✕ 4-5/16" (Height) ✕ 1-1/8"
(Depth)
Signal to Noise Ratio (1 kHz):
100 dB
Dynamic Range (1 kHz):
95 dB
[44 (W) ✕ 110 (H) ✕ 27 (D) mm]
Harmonic Distortion:
0.01%
Note:
• Specifications and design are subject to change without notice for further improvement.
35
Download from Www.Somanuals.com. All Manuals Search And DownloadD. XZ746MP
DXZ746MPDownload from Www.Somanuals.com. All Manuals Search And Download.
36
|