EVERFOCUS
Ultra Series Low Light 720+ TVL 3-Axis
Indoor 12VDC Dome Style Camera
Operation Instructions
Model No. ED700
Please read this manual first for correct installation and operation. This manual should be retained
for future reference. The information in this manual was current when published. The
manufacturer reserves the right to revise and improve its products. All specifications are therefore
subject to change without notice.
PRECAUTIONS
1. Do not install the camera near electric or magnetic fields.
Install the camera away from TV/radio transmitters, magnets, electric motors, transformers
and audio speakers since the electromagnetic fields generated from these devices may distort
the video image or otherwise interfere with camera operation.
2. Never disassemble the camera beyond the recommendations in this manual nor
introduce materials other than those recommended herein. Improper disassembly or
introduction of corrosive materials may result in equipment failure or other damage.
3. Try to avoid facing the camera toward the sun.
In some circumstances, direct sunlight may cause permanent damage to the sensor and/or
internal circuits, as well as creating unbalanced illumination beyond the capability of the
camera to compensate.
4. Keep the power cord away from water and other liquids and never touch the power
cord with wet hands. Touching a wet power cord with your hands or touching the power
cord with wet hands may result in electric shock.
Download from Www.Somanuals.com. All Manuals Search And Download.
of indoor applications. The EQ700 comes with a 3.6mm lens (other focal lengths available –
contact EverFocus) that covers a field of view 67° wide. With low 12VDC current draw, this is the
package of price/performance camera features that you have been waiting for to create analog
CCTV systems that produce astounding image clarity in a wide range of low light applications.
FEATURES
•
•
•
Ultra resolution of over 720 horizontal TV lines for astounding image quality
Exview HAD II sensor delivers exceptional low light sensitivity of .05 lux
Automatic day/night: excellent low light sensitivity with switching from color to B/W
images at low levels of ambient light
•
•
Back Light Compensation (BLC) and Highlight Compensation (HLC) handle unbalanced
illumination in the field of view
Provides 2D-Noise Reduction to improve picture clarity while enabling DVRs to improve
disk storage utilization
•
•
•
Astounding image clarity from the 3.6mm fixed lens
Indoor 3-Axis plastic housing allows wide range of mounting flexibility
Low current draw of only 110mA@ 12VDC (regulated supply required)
Box Contents
Camera
This User Guide
Mounting Screws (2)
Power adapter pigtail
Mounting Template
2
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Imaging Device
1/3" Sony Exview HAD II 960H High Sensitivity Interline CCD
Video Format
NTSC –or- PAL (separate models)
Picture Elements
Effective Picture Elements
Horizontal Resolution
Light Sensitivity
NTSC: 1020(H)x508(V) PAL:1020(H)x596(V)
NTSC: 976(H) x 494(V) PAL:976(H) x 582(V)
More than 720 TVL from production cameras
.05 lux
Over 50dB (AGC off)
BNC 1.0V p-p 75Ω,
0.45
S/N Ratio
Video Output
Gamma Correction
Lens
3.6mm fixed
Auto Gain Control
Electronic Shutter
Sync. Mode
Auto
1/60 (1/50) ~1/100,000 sec.
Internal
Day & Night
Auto Digital Day/Night
2D-DNR
Digital Noise Reduction
Adaptive Tone Curve Reproduction
Back Light Compensation (BLC)
Highlight Compensation (HLC)
Power Source
Wide Range ATW (1,800K to 10,500K)
On
On
12VDC regulated supply required
110mA (1.32W)
Power Consumption
Operating Temperature
Storage Temperature
Humidity
14°F~122°F ; -10°C~50°C
-4°F~140°F ; -20°C~60°C
Less than 80% non condensing
4.08”/103.7mm diameter; 3.09”/78.5mm high
~.35 lb/~400g
Dimensions
Weight
Certifications
CE / FCC
3
Download from Www.Somanuals.com. All Manuals Search And Download.
DIMENSIONS
INSTALLATION
Warning
•
To prevent electrical shock, turn off the electrical power before making electrical
connections.
Drill the Holes and Attach Camera
1. Locate a solid location which can bear the weight of
the camera, and which is free of other electrical wires
or other hazards.
2. Place the drilling template on the ceiling or wall
3. Drill 2 or 3 holes, 2 for mounting screws A & B;
optionally, 1 for power/video cable if wires will be
hidden. If surface wiring will be used, there is a
notch in the base to clear the wire.
4. Start the mounting screws provided partway into the
mounting surface.
5. Remove the clear dome by twisting CCW and lift it off.
Template
4
Download from Www.Somanuals.com. All Manuals Search And Download.
6. If the wires will be concealed, first connect the camera power and video (observe
polarity for power – connecting reverse polarity will damage the camera and void the
warranty.
7. Attach the camera base to the mounting surface by
passing the larger part of the ‘keyhole’ mounting
holes over the heads of the screw and then twisting
slightly clockwise.
8. While holding the base in the CW position, tighten
the screws, being careful not to over tighten (and if
wire is to be run along the mounting surface, be sure
to pass the wire though the notch in the base).
CW
Mounting Holes
Adjusting the Camera Direction
Rotate the inner mechanisms to point the camera in the desired direction. Rotate the camera
module on its axis if necessary to align the image ‘upright’. Loosen the screws which lock the tilt
mechanism. Adjust to obtain the desired field of view and tighten the tilt mechanism screws.
Tilt lock
2 places
Inner Mechanism
Camera module
Replace the dome cover removed in step 5 above, twisting the cover CW to lock it in place.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
EverFocus Electronics Corp.
Corporate Headquarter:
12F, No.79 Sec. 1 Shin-Tai Wu Road,
Hsi-Chih, Taipei, Taiwan
TEL: +886-2-26982334
FAX: +886-2-26982380
China Office:
Room 609, Technology Trade Building,
Shangdi Information Industry Base,
Haidian District, Beijing, China 100085
TEL: +86-10-62973336~39
FAX: +86-10-62971423
U.S.A - California Office:
1801 Highland Avenue Units A & B
Duarte, CA 91010
TEL: +1-626-844-8888
FAX: +1-626-844-8838
U.S.A - New York Office:
415 Oser Avenue Unit S
Happauge, NY 11788
TEL: +1-631-436-5070
FAX: +1-631-436-5027
Europe - Germany Office:
Albert-Einstein-Strasse 1,
D-46446 Emmerich, Germany
TEL: +49-2822-93940
FAX: +49-2822-939495
Japan Office:
5F Kinshicho city Building,
2-13-4 Koto-Bashi,
Sumida-Ku, Tokyo, 130-0022 Japan
TEL: +81-3-5625-8188
FAX: +81-3-5625-8189
India Office:
UK Office:
Suite 803, Housefin Bhavan, C-21,
Bandra Kurla Complex, Bandra (East),
Mumbai 400051. India.
TEL: +91-22-6128-8700
FAX: +91-22-6128-8705
Unit 12 Spitfire Business Park
Hawker Road
Croydon, CR0 4WD
London: 0845 430 9999
Telford: 0845 430 8888
Fax: 020 8649 9907
Your EverFocus product is designed and
manufactured with high quality materials and
components which can be recycled and
reused.
Ihr EverFocus Produkt wurde entwickelt und
hergestellt mit qualitativ hochwertigen
Materialien und Komponenten, die recycelt
und wieder verwendet werden können.
Dieses Symbol bedeutet, dass elektrische und
elektronische Geräte am Ende ihrer
Nutzungsdauer vom Hausmüll getrennt
entsorgt werden sollen.
This symbol means that electrical and
electronic equipment, at their end-of-life,
should be disposed of separately from your
household waste.
Please, dispose of this equipment at your
local community waste collection/recycling
centre.
Bitte entsorgen Sie dieses Gerät bei Ihrer
örtlichen kommunalen Sammelstelle oder im
Recycling Centre.
Helfen Sie uns bitte, die Umwelt zu erhalten, in
der wir leben!
In the European Union there are separate
collection systems for used electrical and
electronic product.
Please, help us to conserve the environment
we live in!
6
Download from Www.Somanuals.com. All Manuals Search And Download.
|