Earthquake Sound Stereo Amplifier XJ 300R User Manual

USER’S MANUAL  
Earthquake Sound reserves the right to amend details of the specifications without notice.  
© Copyright Earthquake Sound Corporation  
Earthquake Sound Corporation  
2727 McCone Avenue, Hayward CA, 94545  
Phone: (510) 732-1000 U.S. Toll Free: (800) 579-7944 Fax: (510) 732-1095  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES  
Driving an  
In-Wall SUB10?  
If the LED light is:  
red = amplifier is in auto mode  
If you are using the XJ-300R to drive a  
subwoofer (including Earthquake’s THOR  
In-Wall SUB10), then you will need to set the  
crossover below 100Hz.  
green = amplifier is sensing signal  
amplifier is on  
If you have a large subwoofer such as a 12”,  
15”, or even 18”, then you will have a great  
response with the crossover set to the 12  
o’clock setting or minimum setting.  
For use with a 8” or 10” subwoofer, you will  
find the 12 o’clock and 2 o’clock setting to be  
the best range.  
auto music sensing setting:  
amplifier automatically turns on  
when music is on- if the music is  
not on for 20 min., the amplifier  
goes into sleep mode.  
Driving a Q10B  
or a MQB-1?  
comes with 1 pair of mounting ears  
to fit into a rack (takes 1 rack space)  
comes with rubber  
legs for shelf option  
amplified output  
to your IW-SUB10  
or your tactile  
Do not use high level input  
with bridged amp  
Note that the high level input  
stage on the XJ300R has a  
common mode ground.  
Therefore, you cannot use a  
bridge mode amplifier as a  
high level input.  
110V/220V switch  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
XJ-300R with MQB-1  
XJ-300R with Q10B  
MQB-1  
4-Ohm Parallel  
Application  
Q10B  
8-Ohm  
Application  
MQB-1  
8-Ohm Standard  
Application  
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
XJ-300R with THOR IW-SUB10  
THOR  
4-Ohm Standard  
Application  
Specifications  
Frequency Response  
28Hz - 175Hz  
Power Line Voltage  
110-120C ~ AC/60Hz/180W  
(220 option)  
Dimensions (HxWxD)  
2” x 9” x 9”  
Weight  
Input Sensitivity For Full Output  
240mVrms from left input with volume  
control at 0dB, 90mVrms with volume  
control fully clockwise.  
Input Impedance  
8.2 kilo-ohm line-level inputs  
PRODUCT SUPPORT  
Please contact Earthquake Sound Technical Support Department for questions regarding any of  
the products mentioned in this manual.  
32-ohm speaker-level inputs  
Internal System Gain  
Earthquake Sound Corporation  
(800) 576-7944 or (510) 732-1000, 9:00am - 5:00pm Mon-Fri, Pacific Time  
Email us at: [email protected]  
4.5 lbs  
Finish  
Black  
42dB from left input jack to speaker with the  
Bass Level control at 0dB, 54dB with the  
control full clockwise  
Output Power into 4 ohm load 280 WRMS  
Output Power into 8 ohm load 140 WRMS  
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Clarion CD Player DXZ855MP User Manual
Connect Tech Electronic Accessory BlueStorm Universal PCI User Manual
Cooper Lighting Work Light SC1000R User Manual
Craftsman Pressure Washer 919679180 User Manual
Danby Microwave Oven DMW111KSSDD User Manual
Euro Pro Convection Oven TO320 User Manual
Flymo Chainsaw HT45 User Manual
Franklin Industries LLC Ice Maker FIM400 User Manual
Gigabyte Personal Computer GA K8VT800M User Manual
Glem GasEmilia Ventilation Hood CK60 User Manual