Clarion CD Player DXZ855MP User Manual

Owner’s manual

Mode d’emploi

Manual de instrucciones

DXZ855MP

CD/MP3/WMA Receiver /

CeNET & Touch Panel Control

•

Récepteur CD/MP3/WMA/ CeNET et écran de contrôle

tactile

•

Receptor de CD/MP3/WMA / Control en panel táctil y

CeNet

Download from Www.Somanuals.com. All Manuals Search And Download.

2. PRECAUTIONS

1. When the inside of the car is very cold and

the player is used soon after switching on the

heater, moisture may form on the disc or the

optical parts of the player and proper

2. Driving on extremely bumpy roads may

cause severe vibration and cause the sound

to skip.

3. This unit uses a precision mechanism. Even

in the event that trouble arises, never open

the case, disassemble the unit, or lubricate

the rotating parts.

playback may not be possible. If moisture

forms on the disc, wipe it off with a soft cloth.

If moisture forms on the optical parts of the

player, do not use the player for about 1 hour.

The condensation will disappear naturally

allowing normal operation.

WARNING

For your safety, do not watch or operate the touch panel while driving.

This unit has been tested and found to comply

with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules.

CAUTION

USE OF CONTROLS, ADJUSTMENTS, OR

PERFORMANCE OF PROCEDURES OTHER

THAN THOSE SPECIFIED HEREIN, MAY

RESULT IN HAZARDOUS RADIATION

EXPOSURE.

These limits are designed to provide reasonable

protection against harmful interference in a

residential installation.

This unit generates, uses, and can radiate radio

frequency energy, and, if not installed and used

in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation.

THE COMPACT DISC PLAYER AND MINI DISC

PLAYER SHOULD NOT BE ADJUSTED OR

REPAIRED BY ANYONE EXCEPT PROPERLY

QUALIFIED SERVICE PERSONNEL.

CHANGES OR MODIFICATIONS NOT

EXPRESSLY APPROVED BY THE

MANUFACTURER FOR COMPLIANCE COULD

VOID THE USER’S AUTHORITY TO OPERATE

THE EQUIPMENT.

If this unit does cause harmful interference to

radio or television reception, which can be

determined by turning the equipment off and on,

the user is encouraged to consult the dealer or

an experienced radio/TV technician for help.

INFORMATION FOR USERS:.

CHANGES OR MODIFICATIONS TO THIS

PRODUCT NOT APPROVED BY THE

MANUFACTURER WILL VOID THE

WARRANTY AND WILL VIOLATE FCC

APPROVAL.

Bottom View of Source Unit

Download from Www.Somanuals.com. All Manuals Search And Download^D. ^XZ855MP

Sloping Console

This unit uses a SLOPING CONSOLE to make

large screen displays possible.

2. Before the SLOPING CONSOLE closes,

there may be a braking sound from the safety

mechanism. This is normal.

When you use the SLOPING CONSOLE, be

sure to close it.

3. If you move the SLOPING CONSOLE by

hand, this may start play. To correct this play,

with the power for the unit ON, press the [Q]

button to close the SLOPING CONSOLE.

CAUTION

4. After a disc is ejected, the SLOPING

CONSOLE automatically returns to the tilted

or closed state. If there is any obstruction

when the SLOPING CONSOLE tries to close,

the safety mechanism is triggered and the

SLOPING CONSOLE returns to the open

state. If this happens, remove the

obstruction, then press the [Q] button.

5. To avoid scratching the compact disc, keep

the 12 or 8 cm CD level when loading or

removing it.

BE CAREFUL NOT TO GET YOUR FINGERS

CAUGHT WHEN OPENING AND CLOSING

THE SLOPING CONSOLE.

1. For safety’s sake, always close the SLOPING

CONSOLE before leaving this unit unused for

a prolonged period or switching OFF the

ignition key.

If you switch OFF the ignition key with the

SLOPING CONSOLE tilted, the SLOPING

CONSOLE does not close.

Handling Compact Discs

• Do not use compact discs that have large

scratches, are misshapen, cracked, etc. Use of

such discs may cause misoperation or

damage.

• To remove a compact disc from its storage

case, press down on the center of the case

and lift the disc out, holding it carefully by the

edges.

Use only compact discs bearing the

mark.

Do not play heart-shaped, octagonal, or other

specially shaped compact discs.

Some CDs recorded in the CD-R/CD-RW mode

may not be usable.

• Do not use commercially available CD

protection sheets or discs equipped with

stabilizers, etc. These may damage the disc or

break the internal mechanism.

Handling

• Compared to ordinary music CDs, CD-R and

CD-RW discs are both easily affected by high

temperature and humidity and some CD-R and

CD-RW discs may not be playable. Therefore,

do not leave them for a long time in the car.

• New discs may

have some

roughness

around the

edges. If such discs

Storage

• Do not expose compact discs to direct sunlight

or any heat source.

• Do not expose compact discs to excess

humidity or dust.

• Do not expose compact discs to direct heat

from heaters.

Ball-point pen

Roughness

are used, the player

may not work or the sound

Cleaning

• To remove fingermarks and dust, use a soft

cloth and wipe in a straight line from the center

of the compact disc to the circumference.

• Do not use any solvents, such as commercially

available cleaners, anti-static spray, or thinner

to clean compact discs.

may skip. Use a ball-point pen

or the like to remove any

roughness from the edge of the disc.

• Never stick labels on the surface of the

compact disc or mark the surface with a pencil

or pen.

• After using special compact disc cleaner, let

the compact disc dry off well before playing it.

• Never play a compact disc with any cellophane

tape or other glue on it or with peeling off

marks. If you try to play such a compact disc,

you may not be able to remove it from the CD

player or it may damage the CD player.

DXZ855MP

Download from Www.Somanuals.com. All Manuals Search And Download.

3. CONTROLS

Source unit

[

]

[Q] (OPEN/EJECT)

ADJ

Photo Sensor

IR-Receiver

[MODE]

[

]

ROTARY

[

] (SOUND)

[SRC]

[ISR]

Display

With the SLOPING CONSOLE opened

[CD SLOT]

DCP Detaching Slider

Download from Www.Somanuals.com. All Manuals Search And Download^D. ^XZ855MP

4. NOMENCLATURE

Names of the Buttons and their Functions

IR-Receiver

[ROTARY] knob

• Receiver for remote control unit. (Operating

range: 30° in all directions)

• Press the knob to turn the power ON.

• Press the knob to turn the power OFF.

• Turn the knob to adjust the volume.

[ADJ] button

• Use this button to set or adjust the various

settings in the adjust mode.

[CD SLOT]

• CD insertion slot.

[Q] (OPEN/EJECT) button

DCP Detaching Slider

• Removes the DCP.

• Open/closes the control panel.

To eject a disc, open the control panel first, and

then press this button once again.

Display

• Displays the various information that indicates

the operating state of this unit such as tuning/

play state and indicators.

• You can operate the display by touching or

touching

Photo Sensor

• This sensor detects the brightness inside your

car. When the auto-dimmer function is set to

“AUTO”, the brightness of the display is

dimmed according to the brightness detected

by this sensor.

the surface. (cf. page 9)

[MODE] button

• Use this button to play in scan, repeat, or

random mode.

• Press and hold this button for 2 seconds or

longer to switch between standard and simple

operation displays.

[

] (SOUND) button

• Use this button for setting or adjusting various

settings such as ADF.

[ISR] (Instant Station Recall) button

• Immediately calls up a favorite radio station

regardless of the current mode. (This is the

ISR function.) You can store radio stations to

the [ISR] button by holding this button down for

2 seconds or longer in the radio mode.

[SRC] button

• Switches among sound sources as shown

below.

Radio ➜ (SIRIUS) ➜ CD/MP3 ➜

(CD changer) ➜ (DVD changer) ➜ (TV) ➜

AUX ➜ Radio...

Note:

External equipment not connected with CeNET is

not displayed.

DXZ855MP

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations when External Equipment is Connected to this Unit

What is Sirius Satellite Radio?

●When the CD/DVD changer is

Sirius is radio the way it was meant to be: Up to

100 new channels of digital quality programming

delivered to listeners coast to coast via satellite.

That means 50 channels of completely

commercial-free music. Plus up to 50 more

channels of news, sports, and entertainment

from names like CNBC, Discovery, SCI-FI

Channel, A&E, House of Blues, E!, NPR,

Speedvision and ESPN.

connected

∗ For details, see the section “CD changer

operations” (cf. page 35). For the DVD

changer, refer to the Owner’s Manual

provided with the DVD changer.

●When the TV is connected

∗ For details, see the section “TV

operations” (cf. page 38).

Sirius is live, dynamic entertainment, completely

focused on listeners. Every minute of every day

of every week will be different. All 50

commercial-free music channels are created in-

house and hosted by DJs who know and love the

music. Do you like Reggae? How about Classic

Rock or New Rock? Sirius has an array of

choices spanning a vast range of musical tastes

including the hits of the 50’s, 60’s, 70’s, & 80’s as

well as Jazz, Country, Blues, Pop, Rap, R&B,

Bluegrass, Alternative, Classical, Heavy Metal,

Dance and many others...

●When the Sirius Satellite Radio

is connected

∗ For details, refer to the Owner’s Manual

provided with the Sirius Satellite Radio.

From its state-of-the-art, digital broadcasting

facility in Rockefeller Center, New York City,

Sirius will deliver the broadest, deepest mix of

radio entertainment from coast to coast. Sirius

will bring you music and entertainment

programming that is simply not available on

traditional radio in any market across the country.

It’s radio like you’ve never heard before.

So Get Sirius and Listen Up! For more

information, visit siriusradio.com.

Download from Www.Somanuals.com. All Manuals Search And Download^D. ^XZ855MP

Touch Panel Buttons

●Standard operation display

●Simple operation display

(To switch to the simple operation display, press

and hold the [MODE] button for 2 seconds or

longer.)

Left slide

button

Right slide

button

Left button

Right button

98.10

FM1

P.CH

SEEK

2:45

DISP

PRESET

BAND

PS/AS

FM1

P.CH

SEEK

2:45

DISP

98.10

Sub buttons

PRESET

BAND

PS/AS

Sub buttons

Left slide button

• Touch this button for seek up/down or track up/

down operations.

• Touch and hold this button for fast-forward/fast-

rewind operations.

Left button

• Touch this button for seek down or track down

operations.

• Touch and hold this button for fast-rewind

operation.

Right slide button

• Touch this button for preset channel up/down,

folder up/down, and disc up/down operations.

Right button

• Touch this button for seek up or track up

operations.

• Touch and hold this button for fast-forward

operation.

Sub buttons

• Shows functions available in a certain context.

Sub buttons

• Shows functions available in a certain context.

DXZ855MP

Download from Www.Somanuals.com. All Manuals Search And Download.

Touch Panel Operations

A touch panel display is used as the display on

this unit. You can operate this display just by

touching it with your fingertip. There are four

main display operations as follows:

Touch

Touch the display with your fingertip, and move

your finger to the up ( ) or down ( ) with your

fingertip still touching the display, and keep your

fingertip on the display. The current operation

continues for the time your fingertip is held on

the display. This operation is used, for example,

for fast-forwarding/fast-rewinding tracks.

Touch

Touch the display with your fingertip and take it

away within 1 second. This is the most basic

operation when operating the display.

Touch and hold

Touch the display with your fingertip and hold it

on the display for 1 or 2 seconds or longer. Do

not move your finger while you are touching the

display.

Touch

FM1

Touch the display with your fingertip, and move

your finger to the up ( ) or down ( ) with your

fingertip still touching the display, and take your

fingertip away within 1 second. This operation is

used, for example, selecting tracks or discs.

P.CH

2:45

DISP

98.10

MANU

Download from Www.Somanuals.com. All Manuals Search And Download^D. ^XZ855MP

5. DCP

The control panel can be detached to prevent

theft. When detaching the control panel, store it

in the DCP (DETACHABLE CONTROL PANEL)

case to prevent scratches.

Attaching the DCP

1. Place the DCP to the SLOPING CONSOLE,

adjusting the metal connecters on DCP and

the SLOPING CONSOLE.

We recommend taking the DCP with you when

leaving the car.

2. Press the DCP until it clicks into the

SLOPING CONSOLE.

Removing the DCP

1. Press the [Q] button to open the DCP.

2. Move the DCP detaching slider to the

“RELEASE” side.

* The DCP display lights and is ready to use.

3. Push and slide the DCP upward to remove.

3. Move the DCP detaching slider to the

“LOCK” side.

CAUTION

• If the slider is on the [RELEASE] side and

the DCP is not locked into place, it may fall

out from vibration of the car. This can break

the DCP, so after removing it, either firmly

reattach it on the unit or put it in its DCP

case.

∗ The SLOPING CONSOLE without DCP

closes automatically in a few seconds.

• The connector connecting the unit and the

DCP is an extremely important part. Be

careful not to damage it by pressing on it

with fingernails, screwdrivers, etc.

Note:

CAUTION

• If the DCP is dirty, wipe off the dirt with a soft, dry

cloth only.

• Do not try to remove or attach while

driving.

• The DCP can easily be damaged by shocks.

After removing it, be careful not to drop it

or subject it to strong shocks.

• If you purchased a replacement DCP, an

electrical adjustment is necessary.

This adjustment requires technical

knowledge.

Please consult Clarion service or a Clarion

service station.

DXZ855MP

Download from Www.Somanuals.com. All Manuals Search And Download.

6. REMOTE CONTROL

Receiver for remote control unit

Operating range : 30° in all directions

Signal transmitter

Remote control unit

[

]

[

]

SRC

BND

]

[

], [

[

], [

]

MUTE

DISP

[

ISR

[

]

RDM

]

RPT

[

]

SCN

Inserting the Battery

1. Turn over the remote control unit and slide the

cover in the direction indicated by the arrow in the

illustration.

2. Insert the battery (CR2025) into the insertion

guides, with the printed side (+) facing upwards.

3. Press the battery in the direction indicated by the

arrow so that it slides into the compartment.

4. Replace the cover and slide in until it clicks into

place.

Insertion guide

Notes:

Misuse may result in rupture of the battery, producing

leakage of fluid and resulting in personal injury or damage

to surrounding materials. Always follow these safety

precautions:

• Use only the designated battery .

• When replacing the battery, insert properly, with +/-

polarities oriented correctly.

• Do not subject battery to heat, or dispose of in fire or

water. Do not attempt to disassemble the battery.

• Dispose of used batteries properly.

Download from Www.Somanuals.com. All Manuals Search And Download^D. ^XZ855MP

Functions of the Remote Control Unit Buttons

Mode

CD changer

DVD changer

Radio/SIRIUS

CD/MP3/WMA

Button

Switches among radio, SIRIUS tuner, CD/MP3/WMA, CD changer, DVD changer, TV and

AUX.

[SRC]

Returns to the first

track.

Moves the next disc

in increasing order.

Switches reception

band.

Switches reception

band.

[BND]

Increases and decreases volume (in all modes).

[

] , [

]

Moves preset

channels up and

down.

Moves tracks up and down.

When pressed and held for 1 second or longer:

Fast-forward/fast-rewind.

Moves preset

channels up and

down.

No function.

Switches between playback and pause.

No function.

[

]

Turns mute on and off.

[MUTE]

[ISR]

Recalls ISR radio station in memory.

When pressed and held for 2 seconds or longer: Stores current station into ISR memory (radio

mode only).

[DISP]

[SCN]

Switches between the title display and the spectrum analyzer display.

Scan play.

Preset scan.

Scan play.

When pressed and

held for 1 second or

longer:

Folder scan play

(MP3/WMA disc).

When pressed and

held for 2 seconds or

longer:

When pressed and

held for 2 seconds or

longer:

When pressed and

held for 1 second or

longer:

Auto store.

Disc scan play.

Repeat play.

No function.

[RPT]

No function.

Repeat play.

When pressed and

held for 1 second or

longer:

When pressed and

held for 1 second or

longer:

Folder repeat play

(MP3/WMA disc).

Disc repeat play.

Random play.

Switches between TV

and VTR.

[RDM]

No function.

Random play.

When pressed and

held for 1 second or

longer:

When pressed and

held for 1 second or

longer:

Folder random play

(MP3/WMA disc).

Disc random play.

∗ Some of the corresponding buttons on the source unit and remote control unit have different functions.

DXZ855MP

Download from Www.Somanuals.com. All Manuals Search And Download.

7. OPERATIONS

Basic Operations

CAUTION

Selecting a mode

1. Press the [SRC] button to change the

Be sure to lower the volume before

operation mode.

switching the unit off or the ignition key. The

unit remembers its last volume setting. If you

switch the power OFF with the volume up,

when you switch the power back ON, the

sudden loud volume may hurt your hearing

and damage the unit.

2. Each time you press the [SRC] button, the

operation mode changes in the following

order:

Radio ➜ (SIRIUS) ➜ CD/MP3 ➜

(CD changer) ➜ (DVD changer) ➜ (TV)

➜ AUX ➜ Radio...

∗ External equipment not connected with

CeNET is not displayed.

Turning ON/OFF the power

Turning on

Note:

Adjusting the volume

• Be careful when using this unit for a long time

without running the engine. If you drain the car’s

battery too far, you may not be able to start the

engine and this can reduce the service life of the

battery.

1. Turning the [ROTARY] knob clockwise

increases the volume; turning it

counterclockwise decreases the volume.

∗ The volume level is from 0 (minimum) to

33 (maximum).

1. Press the [ROTARY] knob.

The mode that was previously active is

displayed.

Switching the operation

display mode

Turning off

1. Press the [ROTARY] knob.

∗ The clock will stay displayed after the

power is turned OFF.

There are 2 basic operation displays: standard

operation display and simple operation display.

1. Press and hold the [MODE] button for 2

seconds or longer to switch the operation

display.

■ To turn off the clock display

Touch the clock to turn off the clock display

while the power is off.

FM1

P.CH

SEEK

98.10

2:45

DISP

CODEMATIC function

PRESET

BAND

PS/AS

When “CODEMATIC” is set to “ON”, and the

power is turned ON with the DCP attached, the

Touch Code display appears. Touch the display

in the order that was set in the adjust mode.

In the simple operation display, the operations of

touching in the radio or CD mode display

screen are not required.

ADJ SETTING

Descriptions given in this manual are mainly for

the standard operation display. For descriptions

for operations in the simple operation display,

refer to the descriptions for the screen displays

in the radio mode or the CD mode.

CODEMATIC

OFF

RTN

For details on the CODEMATIC function, see

“Using the security function” (cf. page 34).

Download from Www.Somanuals.com. All Manuals Search And Download^D. ^XZ855MP

Basic Operations

3. Touch

on the left of the display to

Switching the background

1. Touch [DISP].

select [DAY] or [NIGHT].

COLOR SELECT

NIGHT

DARK BLUE

98.10

FM1

P.CH

SEEK

RTN

2:45

DISP

PRESET

BAND

PS/AS

4. Touch

select the color to set.

● COLOR

• DARK BLUE

on the right of the display to

∗ DISPLAY EDIT screen displays.

2. Touch

on the left of the display to

choose the background.

DISPLAY EDIT

• IVORY

• WINE RED

BGV

• LIGHT BLUE

• GREEN

RTN

SP/ANA

∗ The background includes 12 wallpaper

images and 2 motion pictures.

∗ Choose [SCAN] to automatically display all

the wallpaper.

Adjusting the spectrum

analyzer

● Background

M01: WRC

1. Touch [DISP].

M02: Landscape

P01: Car and Checker Flag

P02: 307WRC from Two View Points

P03: Rally Driver

Don ^,

Stop Be

TRACK

01:01

2:45

DISP

TOP

P04: Driving Scene

P05: Cube

P06: Bubble

∗ Display edit mode appears.

2. Touch [SP/ANA].

DISPLAY EDIT

P07: Speaker

P08: Digital Image1 (Disc media)

TITLE

BGV

P09: Digital Image2 (Broadcast media such

BLUE

as satellite)

INPUT

RTN

SP/ANA

COLOR

P10: Mixer

P11: Record Player

P12: Meter

∗ The display shows the spectrum analyzer

mode.

3. Touch

on the right of the display to

3. Touch [RTN].

select the spectrum analyzer to set.

DISPLAY EDIT

■ To change wallpaper color

You can change the colors of the wallpaper

(from P05 to P12).

BGV

SPE/ANA

D-BLUE

COLOR

MID

TITLE

SENS

RTN

• It can be set to both “DAY” mode and “NIGHT”

mode.

• You can choose from four types.

• When [SCAN] is selected, each of them is

1. Touch [DISP].

2. Touch [COLOR].

DISPLAY EDIT

displayed for about 10 seconds.

4. Touch [SENS] to select the sensitivity.

DISPLAY EDIT

TITLE

BGV

BLUE

AUTO

BGV

SPE/ANA

D-BLUE

COLOR

LOW

SCROLL

RTN

SP/ANA

COLOR

TITLE

SENS

RTN

∗ The [COLOR] is displayed only when you

choose wallpaper from P05 to P12.

• You can choose from [HIGH], [MID], or [LOW].

5. Touch [RTN].

DXZ855MP

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Operations

Switching the title display

You can display stored information such as disc

titles or track titles when playing back music in

CD or CD changer mode.

1. Touch [DISP] while a title is shown.

TRACK

2:45

DISP

02:53

TOP

∗ Display edit mode appears.

2. Touch [TITLE].

DISPLAY EDIT

BGV

SPE/ANA

D-BLUE

COLOR

LOW

TITLE

SENS

RTN

∗ Title edit mode appears.

3. Touch

on the right of the display to

choose the kind of title to show.

DISPLAY EDIT

TITLE

TRACK

BGV

D-BLUE

AUTO

RTN

SP/ANA

COLOR

SCROLL

∗ The title you have chosen is displayed. If it

is too long to fit into the display, it

automatically scrolls.

4. Touch [SCROLL].

• Select [AUTO] to scroll the title repeatedly.

• Select [ONCE] to scroll the title only once.

Notes:

• You cannot set the scroll options in User title

mode.

5. Touch [RTN].

●CD mode (MP3/WMA)

Folder title (when using a folder) ➜ Play

list (when using a play list) ➜ Track title

➜ Album TAG ➜ Artist TAG ➜ Title TAG ➜

Folder title (when using a folder)...

Notes:

• MP3 supports ID3 Tags V2.3 / 2.2 / 1.1 / 1.0.

• Tag displays give priority to V2.3 / 2.2.

• In the case of album Tags for WMA, the

information written into the extension header is

displayed.

• Only ASCII characters can be displayed in Tags.

Download from Www.Somanuals.com. All Manuals Search And Download^D. ^XZ855MP

Radio Operations

Reception band display

FM reception

AM: AM band name

FM1: FM band name

For enhanced FM performance, the

tuner includes signal actuated

stereo control, Enhanced Multi AGC, Impulse

noise reduction circuits and Multipath noise

reduction circuits.

PRESET

Touching this displays a preset memory No. list.

BAND

Touching this switches the reception band.

Touching and holding this for 1 second or longer

switches between the manual tuning mode and

the seek tuning mode.

Screen displays in the radio

mode

● Standard operation display

The standard operation display appears by

pressing the [SRC] button and selecting the

radio mode.

PS/AS

Touching this starts a preset scan.

Touching and holding this for 2 seconds or

longer starts an auto store.

Touching this during the preset scan/auto scan

ends the operation.

Preset No.

display

Title display

Reception

Frequency

display

DISP

band display

The display contents can be changed.

a/d (only in the simple operation display)

Touching these enables seek tuning or step

tuning (in the manual tuning mode).

Touching and holding these enables quick

tuning (in the manual tuning mode).

98.10

FM1

P.CH

SEEK

2:45

DISP

PRESET

BAND

PS/AS

DISP

PRESET

PS/AS

SEEK/MANU

display

BAND

Listening to the radio

● Simple operation display

1. Press the [SRC] button to select the radio

mode.

Pressing and holding the [MODE] button for 2

seconds or longer switches the simple operation

display.

Each press of the [SRC] button switches the

mode as follows:

a/d

Radio ➜ (SIRIUS) ➜ CD/MP3 ➜

(CD Changer) ➜ (DVD Changer) ➜ (TV)

➜ AUX ➜ Radio...

FM1

∗ The mode of equipment that is not

connected is not displayed.

P.CH

SEEK

98.10

2:45

DISP

PRESET

BAND

PS/AS

2. Touch [BAND] to switch the reception band.

Each touch of [BAND] switches the

reception band as follows:

Frequency display

The frequency currently being received is

displayed.

FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...

Touching

on the left slide

button in the standard operation display allows

you to perform seek tuning or manual tuning.

Tuning

Preset No. display

There are 3 types of tuning mode available,

seek tuning, manual tuning and preset tuning.

Touching

on the right slide button in the

standard operation display selects a preset

memory.

Title display

Displays the name of the broadcast channel

currently being received.

DXZ855MP

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio Operations

Seek tuning

Preset memory

Seek tuning is a function for automatically

tuning stations with good reception.

A total of 24 preset positions (6-FM1, 6-FM2, 6-

FM3, 6-AM) exists to store individual radio

stations in memory.

1. Touch and hold [BAND] for 1 second or

longer if “MANU” is displayed.

Automatic tuning is possible when “SEEK” is

displayed.

1. Touch [BAND] to switch the reception band.

2. Operate the frequency display to tune to a

frequency to store.

2. Touch

on the frequency display.

3. Touch [PRESET].

“SEEK UP”/“SEEK DOWN” is displayed, and

tuning starts.

Tuning automatically stops at stations with

good reception.

The preset memory No. list is displayed.

4. Touch and hold the preset No. to store the

station to for 2 seconds or longer.

You will hear a long beep, and the station is

stored in memory.

■ To cancel tuning

1. Touch

again.

on the frequency display

Auto store

Auto store is a function for storing up to 6

stations that are automatically tuned in

sequentially.

Manual tuning

There are 2 ways available: quick tuning and

step tuning.

1. Touch and hold [PS/AS] for 2 seconds or

longer.

In the step tuning mode, the frequency changes

1 step at a time. In the quick tuning mode, you

can quickly tune the desired frequency.

“A-STORE” is displayed.

∗ Stations with good reception are

automatically searched, and are stored to

preset memory (No.1 to No.6) in order

from the station having the lowest

frequency.

1. Touch and hold [BAND] for 1 second or

longer if “SEEK” is displayed.

Manual tuning is possible when “MANU” is

displayed.

Notes:

2. Operate the frequency display to tune to a

frequency on which there is a broadcast.

• When auto store is performed, stations stored to

memory so far are cleared.

• When there are fewer than 6 stations with good

reception, low frequencies are automatically

returned to, and auto store is performed again. If

there are fewer than 6 stations even after auto

store is performed twice, stations stored so far

remain in memory.

● Step tuning

Touch

on the frequency display.

● Quick tuning

Touch

on the frequency display. Tuning

stops when you take your finger away from the

panel.

Preset scan

Preset scan is a function for receiving stations in

the order that they are currently stored to preset

No. so that broadcasts can be checked.

Recalling a preset station

Recalling a preset station is a function for tuning

pre-stored stations.

1. Touch [PS/AS].

1. Touch [PRESET].

“P-SCAN” is displayed.

The preset memory No. list is displayed.

∗ The currently stored stations are received

in order for 7 seconds or longer each.

Stations with poor reception are skipped,

and the next station is received.

2. Touch the preset memory No.

∗ In the standard operation display, preset

No. can also be tuned by touching

■ To cancel tuning

1. Touch [RTN].

Download from Www.Somanuals.com. All Manuals Search And Download^D. ^XZ855MP

Radio Operations

■ To cancel preset scan

1. Touch [PS/AS].

“P-SCAN” display disappears and the

stations that were being received when [PS/

AS] was touched are received next.

Instant station recall (ISR)

Instant station recall is a special radio preset

that instantly accesses a favorite radio station at

a touch of a button. The ISR function even

operates with the unit in other modes.

• The factory default setting is “FM87.9MHz”.

1. Press the [ISR] button.

“ISR” appears on the display.

■ To return to the previous mode

Press the [ISR] button again or press the [SRC]

button.

■ To store the station to “ISR”

In the radio mode, tune the station to store, and

press and hold the [ISR] button for 2 seconds or

longer.

You will hear a long beep, and the station

currently being received is stored to ISR.

DXZ855MP

Download from Www.Somanuals.com. All Manuals Search And Download.

CD/MP3/WMA Operations

a/d (only in the simple operation display)

Touching these buttons selects the track to play.

Touching and holding these buttons fast-

forwards or fast-rewinds tracks.

Screen displays in the CD/

MP3 mode

● Standard operation display

The standard operation display appears by

pressing the [SRC] button to select the CD/MP3

mode.

(Appears only in MP3/WMA discs

and the simple operation display)

Touching these buttons selects the folder to

play.

Track No.

display

Title display

Folder No.

display

MP3 (WMA)

MP3/WMA

MP3

What is MP3?

Don ^,

Stop Be

MP3 is an audio compression method and

classified into audio layer 3 of MPEG standards.

This audio compression method has penetrated

into PC users and become a standard format.

TRACK

FOLDER

2:45

DISP

01:01

TOP

DISP

This MP3 features the original audio data

compression to about 10 percent of its initial

size with a high sound quality. This means about

10 music CDs can be recorded on a CD-R disc

or CD-RW disc to allow a long listening time

without having to change CDs.

TOP

Playing time

display

● Simple operation display

Pressing and holding the [MODE] button for 2

seconds or longer switches the simple operation

display.

What is WMA?

a/d

WMA is the abbreviation of Windows Media

Audio, an audio file format developed by

Microsoft Corporation.

MP3

Don ^,

Stop Be

TRACK

Notes:

01:26

2:45

DISP

TOP

• If you play a file with DRM (Digital Rights

Management) for WMA remaining ON, no audio is

output. (The DRM indicator blinks.)

• Windows Media™, and the Windows® logo are

trademarks, or registered trademarks of Microsoft

Corporation in the United States and/or other

countries.

Playing time display

Î00: 01: The playing time is displayed.

Track No. display

is touched, you can select the

track to play, or fast-forward or fast-rewind

tracks.

● To disable DRM (Digital Rights

Management):

Title display

1. When using Windows Media Player 8, click

on TOOLS ➜ OPTIONS ➜ COPY MUSIC

tab, then under COPY SETTINGS, unclick

the check box for PROTECT CONTENT.

Then, reconstruct files.

The selected title is displayed.

Folder No. display (in the case of MP3/WMA)

Touching

selects folders.

TOP

2. When using Windows Media Player 9, click

on TOOL ➜ OPTIONS ➜ MUSIC RECORD

tab, then under Recording settings, unclick

the Check box for RECORD PROTECTED

MUSIC. Then, reconstruct files.

Touching this starts play from the track at the

top of the disc or folder being played.

Touching this pauses or resumes play.

Personally constructed WMA files are used

at your own responsibility.

DISP

The display contents can be changed.

Download from Www.Somanuals.com. All Manuals Search And Download^D. ^XZ855MP

CD/MP3/WMA Operations

● Default value is “CD”.

Precautions when creating

MP3/WMA disc

● Usable sampling rates and bit rates:

1. MP3: Sampling rate 11.025 kHz-48 kHz,

Bit rate: 8 kbps-320 kbps / VBR

2. WMA: Bit rate 48 kbps-192 kbps

● File extensions

1. Press the [MODE] button.

2. Touch [Å]/[Î] to go to the next page.

3. Touch [MULTI SESS].

Each touch of [MULTI SESS] toggles the

MULTI SESS display between “CD” (play

CD-DA) or “MP3/WMA” (play MP3/WMA).

Setting

Set to CD

Set to MP3/WMA

Disc

1. Always add a file extension “.MP3” or

“.WMA” to MP3 or WMA file by using single

byte letters. If you add a file extension other

than specified or forget to add the file

extension, the file cannot be played.

Mixed with CD and

MP3/WMA type tracks

Play CD

Play MP3/WMA

CD-DA

Play CD

MP3/WMA disc

Play MP3/WMA Play MP3/WMA

2. Files without MP3/WMA data will not play.

The indication “––:––” appears in the play

time display if you attempt to play files

without MP3/WMA data.

∗ The multi-session selection setting is

reflected the next time you load a CD.

Note:

• When playing a CCCD (Copy Control CD), set the

setting to CD type. When this is set to MP3/WMA

type, the CD cannot be played normally in some

cases.

● Logical format (File system)

1. When writing MP3/WMA file on a CD-R disc

or CD-RW disc, please select “ISO9660

level 1, 2 or JOLIET or Romeo” as the

writing software format. Normal play may not

be possible if the disc is recorded on another

format.

Disc-In-Play function

As long as the ignition key is turned to the ON or

ACC position, this function allows you to turn the

power to the unit and start playing the disc

automatically when the disc is inserted even if

the power is not turned on.

2. The folder name and file name can be

displayed as the title during MP3/WMA play

but the title must be within 128 single byte

alphabetical letters and numerals (including

an extension).

3. Do not affix a name to a file inside a folder

having the same name.

Loading a CD

● Folder structure

1. Press the [Q] button.

The control panel opens.

1. A disc with a folder having more than 8

hierarchical levels will be impossible.

2. Insert the disc into the CD SLOT.

When the disc is loaded, the control panel

automatically closes after several seconds,

and play starts.

● Number of files or folders

1. Up to 255 files can be recognized per folder.

Up to 500 files can be played.

Notes:

2. Tracks are played in the order that they were

recorded onto a disc. (Tracks might not

always be played in the order displayed on

the PC.)

• Never insert foreign objects into the CD SLOT.

• If the CD does not insert easily, there may be

another CD in the mechanism or the unit may

require service.

3. Some noise may occur depending on the

type of encoder software used while

recording.

• Discs not bearing the

mark and

CD-ROMs cannot be played by this unit.

• Some CDs recorded in the CD-R/CD-RW mode

may not be usable.

Loading 8 cm compact discs

∗ No adapter is required to play an 8 cm CD.

∗ Insert the 8 cm CD into the center of the CD

SLOT.

Multisession function

When a disc contains both CD-DA and MP3/

WMA type tracks mixedly, you can select which

type of the recorded tracks to play.

DXZ855MP

Download from Www.Somanuals.com. All Manuals Search And Download.

CD/MP3/WMA Operations

Backup eject function

Selecting a track

You can eject a disc by pressing the [Q] button

even if the engine key or ACC is at the OFF

position.

When a CD-R/CD-RW recorded with an MP3

file or a WMA file is loaded, you can select only

tracks recorded to the same folder by touching

on the track display.

1. To listen to the next track, touch

track display.

on the

CAUTION

When the disc is ejected, press the [Q]

button to close the control panel. If the

control panel is left open, you will hear a

double beep, and the control panel

automatically closes.

2. To listen to the previous track, touch

twice on the track display.

Touching

touch

plays the next track. If you

more times, the track advances

ahead to the track for the number of times

you touched

Touching

you touch

back to the track for the number of times you

touched

and that track is played.

plays the previous track. If

more times, the track moves

1. Press the [Q] button.

The control panel opens.

2. Press the [Q] button.

The disc is ejected.

and that track is played.

twice on the track display

Note:

∗ If you touch

• Always close the SLOPING CONSOLE after

opening it or ejecting the CD.

while the start of the track is being played,

the track 2 tracks back is sometimes

played.

CAUTION

■ To select a folder

To select a different folder, touch

folder display on the right.

on the

• Be careful not to catch your hand or

fingers while closing the SLOPING

CONSOLE.

• Do not try to put your hand or fingers in

the disc insertion slot. Also never insert

foreign objects into the slot.

• Do not insert discs where adhesive comes

out from cellophane tape or a rental CD

label, or discs with marks where

cellophane tape or rental CD labels were

removed. It may be impossible to extract

these discs from the unit and they may

cause the unit to break down.

Play list mode

This function allows you to play tracks, up to

latest 5 time stamps, by reading the play list

information written on the disc.

1. Press the [MODE] button.

2. Touch [Å]/[Î] to go to the next page.

3. Touch [PLAY LIST].

MODE

MULTI

SESS

PLAY

LIST

Listening to a disc already

loaded in the unit

MP3 WMA

RTN

1. Press the [SRC] button to select the CD/

MP3 mode.

The operation of selecting the play list or

tracks in the play list is the same as that of

selecting a folder or tracks in a folder.

∗ Play list play is possible only when there is

a file whose extension is “.M3U” on the

CD-R/RW.

∗ Up to 5 play lists can be recognized, and

up to 255 files can be recognized per play

list.

∗ Play automatically starts when the mode

changes to the CD/MP3 mode.

Pausing play

1. Touch [

■ To resume play

■ Stopping play of play list

1. Press the [MODE] button.

1. Touch [

] again.

Download from Www.Somanuals.com. All Manuals Search And Download^D. ^XZ855MP

CD/MP3/WMA Operations

2. Touch [Å]/[Î] to go to the next page.

3. Touch [PLAY LIST].

∗ Scan play starts from the next track after

the track currently being played.

■ To cancel scan play

Notes:

• The SCN/RPT/RDM functions cannot be used

while in the play list mode.

1. Press the [MODE] button.

• The title changes from folder name to play list

name.

Folder scan play

This function allows you to locate and play the

first 10 seconds of the first track of all the folders

recorders on a disc.

Making a play list

1. Write desired tracks to a CD-R/RW, etc. Be

sure to use alphanumeric/ASCII characters

for all file names.

1. Press the [MODE] button.

2. Touch [FOLDER SCAN].

∗ Folder scan play starts from the folder

2. Make a play list by using a multimedia

player, etc. and save the data. The file format

must be M3U.

following the folder that is playing.

■ To cancel folder scan play

1. Press the [MODE] button.

3. Again, write this play list to the CD-R/RW,

etc.

Notes:

• When writing to a CD-R/RW, etc., be sure to use

alphanumeric/ASCII characters.

• Up to 5 layers can be recognized as a list. For

written play lists, latest 5 lists are recognized in

the order in which they are written.

• When writing to a CD-R/RW, etc., turn off the Disc

At Once function.

Repeat play

This function allows you to play the current track

repeatedly.

1. Press the [MODE] button.

2. Touch [TRACK RPT].

• When adding a play list, it is recommended to

write it in the “Root” folder.

■ To cancel repeat play

1. Press the [MODE] button.

Fast-forward/fast-rewind

Folder repeat play

1. To fast-forward, touch

display.

on the track

This function allows you to play the current

folder repeatedly.

2. To fast-rewind, touch

display.

on the track

1. Press the [MODE] button.

2. Touch [FOLDER RPT].

Top function

■ To cancel folder repeat play

1. Press the [MODE] button.

The top function resets the CD player to the first

track of the disc.

1. Touch [TOP].

Random play

Play starts from the first track (track No.1).

This function allows you to play all tracks on the

disc at random.

When the disc contains 2 or more folders, all of

the tracks in the folder are played at random,

followed by all of the tracks in the next folder.

This is repeated for all folders.

Scan play

This function allows you to locate and play the

first 10 seconds of all the tracks recorded on a

disc.

1. Press the [MODE] button.

2. Touch [TRACK RDM].

1. Press the [MODE] button.

2. Touch [TRACK SCAN].

DXZ855MP

Download from Www.Somanuals.com. All Manuals Search And Download.

CD/MP3/WMA Operations

■ To cancel random play

1. Press the [MODE] button.

Folder random play

This function allows you to play all folders on the

disc at random.

1. Press the [MODE] button.

2. Touch [FOLDER RDM].

■ To cancel folder random play

1. Press the [MODE] button.

Download from Www.Somanuals.com. All Manuals Search And Download^D. ^XZ855MP

Sound Adjustment

3. Touch

on the right of the display to

Adjustment items

select the ADF mode.

You can adjust a sound effect or tone quality to

your preference.

ADF MODE

ADF 1

Anti Distortion Filter (ADF) .................... Page 24

MAGNA BASS EXTEND ....................... Page 24

Sub-woofer speaker volume

RTN

(SW VOLUME)................................. Page 25

Bass setting (BASS) ............................. Page 25

Treble setting (TREBLE) ....................... Page 25

Balance (BALANCE) ............................. Page 25

Fader (FADER) ..................................... Page 25

Filter (FILTER)....................................... Page 26

∗ Select one of “USER”, “1”, “2”, “3”, or

“OFF”.

4. To change the details of the ADF setting,

press the [ADJ] button.

5. Touch

select the desired item.

Each touch of

switches the

on the left of the display to

adjustment item display as follows:

Setting the ADF

●Adjustment item (when USER is

selected in step 3)

• ADF is the abbreviation of Anti Distortion

Filter.

The adopted “Liveliness Enhancement Filter”

and “Sound Tone Compensation” functions

allow well-modulated realistic playback without

affecting the characteristics of the original sound

tone.

BASS ➜ TREBLE ➜ COMP ➜ BASS...

●Adjustment item (when 1 to 3 is

selected in step 3)

LEVEL ➜ COMP ➜ LEVEL...

This unit is provided with 4 types of sound tone

effects stored in memory. Select the one you

prefer.

6. Touch

on the right of the display to

adjust the item.

∗ “BASS” and “TREBLE” can be adjusted

within the range 1 to 13.

∗ “LEVEL” can be adjusted within the range -

3 to +3.

ADF-1 : Suitable for genuine speakers

ADF-2 : Suitable for separate speakers

ADF-3 : Suitable for co-axial speakers

∗ Select either “ON” or “OFF” for “COMP”.

USER : This setting can be adjusted by the

user to his or her individual preference.

7. Press the [SOUND] button to return to the

original mode.

OFF :

No sound effect

• The factory default setting is “OFF”.

Notes:

Setting MAGNA BASS

EXTEND

• As the volume changes when ADF is switched,

switch ADF with the volume and “SW VOLUME”

(sub-woofer) turned down as far as possible.

The MAGNA BASS EXTEND does not adjust

the low frequencies like the normal sound

adjustment function, but emphasizes the deep

bass frequencies to provide you with a dynamic

sound.

1. Press the [SOUND] button.

2. Touch [ADF].

SOUND

• The factory default setting is "OFF".

1. Press the [SOUND] button.

M-BASS

ADF

OFF

BASS

TREBLE

BALANCE

FADER

OFF

RTN

2. Touch [M-BASS EX] to select "ON" or

"OFF".

∗ Each time you touch [M-BASS EX], the

adjustment item changes as following

order:

OFF ➜ ON ➜ OFF...

3. Press the [SOUND] button to return to the

original mode.

DXZ855MP

Download from Www.Somanuals.com. All Manuals Search And Download.

Sound Adjustment

Note:

Adjusting the treble (Gain,

Frequency)

When "1", "2", "3", or "USER" is selected for ADF

(Anti Distortion Filter), setting of MAGNA BASS EX

cannot be performed.

This adjustment can only be performed when

the ADF (Anti Distortion Filter) is set to "OFF".

1. Press the [SOUND] button.

2. Touch [TREBLE].

Adjusting the sub-woofer

• "SW VOLUME" (sub-woofer) can be adjusted

only when the "SUB-WOOFER" is set to "ON"

(cf. page 32).

3. Touch

select the item.

Each touch of

on the left of the display to

• The factory default setting for SW VOLUME is

“0”.

switches the

adjustment items as follows:

1. Press the [SOUND] button.

GAIN ➜ FREQUENCY ➜ GAIN...

2. Touch [SW VOLUME].

4. Touch

on the right of the display to

adjust the setting.

SW VOLUME

∗ The factory default setting for "GAIN" is

"0". (Adjustment range: -6 to +6)

∗ The factory default setting for

"FREQUENCY" is "12k". (Adjustment

8kHz/12kHz)

RTN

3. Touch

on the right of the display and

adjust the item as desired.

∗ This item can be adjusted within the range

-5 to +5.

5. When the adjustment is complete, press the

[SOUND] button to return to the original

mode.

4. Press the [SOUND] button to return to the

original mode.

Adjusting balance/fader

BALANCE:

Adjusts the volume balance between the left

and right speakers.

Adjusting the bass (Gain,

Frequency, Q-curve)

FADER:

This adjustment can only be performed when

Adjusts the volume balance between the front

and rear speakers.

the ADF (Anti Distortion Filter) is set to "OFF".

1. Press the [SOUND] button.

2. Touch [BASS].

• The factory default setting for BALANCE is

“0” and for FADER is “0”.

1. Press the [SOUND] button.

3. Touch

select the item.

Each touch of

on the left of the display to

2. Touch [BALANCE] or [FADER].

BALANCE

switches the

adjustment items as follows:

GAIN ➜ FREQUENCY ➜ Q ➜ GAIN...

RTN

4. Touch

on the right of the display to

adjust the setting.

3. Touch

on the right of the display and

∗ The factory default setting for "GAIN" is

"0". (Adjustment range: -6 to +8)

∗ The factory default setting for

"FREQUENCY" is "50". (Adjustment 50/

80/120Hz)

adjust the item as desired.

∗ “BALANCE” can be adjusted within the

range L13 (left side emphasized) and R13

(right side emphasized).

∗ “FADER” can be adjusted within the range

R12 (rear side emphasized) and F12 (front

side emphasized).

∗ The factory default setting for "Q" is "1".

(Adjustment 1/1.25/1.5/2)

5. When the adjustment is complete, press the

[SOUND] button to return to the original

mode.

4. Press the [SOUND] button to return to the

original mode.

Download from Www.Somanuals.com. All Manuals Search And Download^D. ^XZ855MP

Sound Adjustment

Adjusting the filter frequency

Filter frequency

You can set a filter frequency value best suited

for your speakers.

* This item can be adjusted only when “SUB-

WOOFER” is set to “ON”.

• The factory default setting for FILTER is

“THROUGH”.

Filter adjustment

● SUB-W LPF (Subwoofer Low-Pass Filter)

adjustment

This filter cuts the signals above the selected

frequency value.

Each touch switches the frequency value as

follows:

THROUGH ➜ 50Hz ➜ 80Hz ➜ 120Hz ➜

THROUGH...

Select the frequency that suits your subwoofer.

Set to “THROUGH” if you use powered

subwoofers with built-in low-pass filters.

1. Press the [SOUND] button.

2. Touch [FILTER].

3. Touch

on the right of the display to

select the frequency value.

• Select from THROUGH, 50Hz, 80Hz, or

120Hz.

4. Press the [SOUND] button to return to the

original mode.

DXZ855MP

Download from Www.Somanuals.com. All Manuals Search And Download.

Common Operations

Screen display in the TITLE

INPUT

CD changer mode

DCZ625 connected

CDC655Tz connected 100 titles

CDC1255z connected 50 titles

Number of titles

100 titles

The “TITLE INPUT” screen appears when you

enter a title.

FONT

display

Title

display

TEXT

display

1. Either receive the radio or TV station, or play

a CD for which you want to enter the title.

2. Touch [DISP].

3. Touch [INPUT].

DISPLAY EDIT

TITLE INPUT

FONT

Me I o dy

a-Z

TEXT

MEMO

RTN

TITLE

ABCDE

BGV

L-BLUE

MEMO

RTN

SP/ANA

COLOR

INPUT

The TITLE INPUT screen appears.

FONT display

4. Touch [ ]/[ ] to move the cursor to indicate

the input position.

A : Capital alphabet letters

a : Small alphabet letters

1 : Numbers

TITLE INPUT

FONT

A-Z

TEXT

U: Symbols

A : Umlaut

MEMO

RTN

Title display

The currently entered title is displayed.

∗ Up to ten characters can be input.

TEXT display

CAUTION

Touch

to select the character to enter.

Pressing the reset button clears all user

memories such as titles stored on this unit.

Touching these buttons moves the cursor

indicating input position.

5. Touch

text.

on [FONT] to select the type of

RTN

Each touch of

switches the type of

Touching this cancels entry of titles, and returns

the display to the original screen.

text as follows:

Capital alphabet letters

(space) A B C D E F G H I J K L M N O P Q

R S T U V W X Y Z

Small alphabet letters

a b c d e f g h i j k l m n o p q r s t u v w x y z

Numbers

MEMO

Touching this stores the title that was input, and

returns the display to the original screen.

Entering titles

0 1 2 3 4 5 6 7 8 9

Symbols

You can give radio/TV stations and CDs a title

up to 10 characters long. These titles can be

displayed when broadcasts are received or

when playing CDs.

Umlaut

The number of titles that can be entered is as

follows:

Å Ä Ë É E Ê Ï Æ Ø å ä ë é e ê ï ö ü æ ø

6. Touch

on [TEXT] to determine the

Mode

Number of titles

50 titles

20 titles

characters to enter.

CD mode

TV mode

Radio mode

7. Repeat steps 4 to 6 to enter the title.

8. Touch [MEMO].

30 titles

You will hear a long beep, and the title is

stored in memory.

Download from Www.Somanuals.com. All Manuals Search And Download^D. ^XZ855MP

Common Operations

4. When “ENT” is displayed at the right of the

display, touch [ENT] to switch to the

adjustment details display.

■ When a new title is stored beyond the

maximum number of titles

In the case of a radio or TV station

Titles not stored to preset channels and ISR

(radio stations only) are automatically cleared,

and the new title is stored in memory.

5. Touch

on the right of the display to

set the details.

■ To return to the original mode

1. Press the [ADJ] button again.

In the case of a CD

Titles of CDs that have been played the least

are cleared, and the new title is stored in

memory.

■ To call up the last operated item

1. Touch [RECENT].

Clearing titles

1. Either receive the radio or TV station, or play

a CD whose title you want to clear.

2. Touch [DISP].

3. Touch [INPUT].

4. Touch and hold [RTN] for 2 seconds or

longer to erase the title.

5. Touch [MEMO].

∗ Erasing is performed by overwriting with a

blank title.

Triggered audio mute for

cellular telephones

This unit requires special wiring to mute the

audio signal automatically when a cellular

telephone rings in the car.

∗ This function is not compatible with all cellular

telephones. Contact your local authorized

Clarion dealer for information on proper

installation and compatibility.

Changing settings

Selecting setting items

1. Press the [ADJ] button.

The mode changes to the adjust mode.

ADJ

APPEA-

RANCE

SOUND

TUNER

SETTING

RECENT

RTN

2. Touch [APPEARANCE], [SOUND],

[TUNER], or [SETTING].

3. Touch

on the left of the display to

select the item to set.

DXZ855MP

Download from Www.Somanuals.com. All Manuals Search And Download.

Common Operations

● Setting items

Main item

Sub item

APPEARANCE

CLOCK EDIT

• Clock setting (cf. page 30)

MSG INFO

• Setting the message display ON/OFF (cf. page 30)

MSG INPUT

• Message information input (cf. page 30)

DIMMER IN

• Auto-dimmer setting (cf. page 31)

DMR LEVEL

• Setting the dimmer level (cf. page 31)

BRIGHT

• Adjusting the display brightness (cf. page 31)

BLINK LED

• Making the LED blink when DCP is removed (cf. page 31)

BEEP

• Setting beep (cf. page 32)

SCROLL SPD

• Adjusting the scroll speed (cf. page 32)

SRC ICON

• Setting the source icon display (cf. page 32)

SOUND

TUNER

SUB WOOFER

• Setting sub woofer speaker ON/OFF (cf. page 32)

AMP CANCEL

• Setting internal amplifier use ON/OFF (cf. page 32)

TV DIVER

• Setting TV diversity (cf. page 40)

SID DISP

• Display the Sirius ID No. (cf. page 33)

SETTING

AUX SENS

• Setting the portable audio (AUX) input level (cf. page 33)

SYSTEM CHECK

• Performing a system check (cf. page 33)

CODEMATIC

• Setting security (cf. page 34)

SLIDE CONT

• Setting the slide direction of the slide buttons (cf. page 34)

Download from Www.Somanuals.com. All Manuals Search And Download^D. ^XZ855MP

Common Operations

3. Touch

on the left of the display to

Setting the clock (CLOCK)

When the power is OFF, the clock is displayed.

The clock is displayed in 12-hour format.

select "MSG INFO".

ADJ APPEARANCE

MSG INFO

OFF

1. Press the [ADJ] button.

2. Touch [APPEARANCE].

RTN

3. Touch

on the left slide button to select

4. Touch

on the right of the display to

“CLOCK EDIT” and touch [ENT].

select “ON” or “OFF”.

ADJ APPEARANCE

5. Press the [ADJ] button to return to the

[

]

ENT

CLOCK EDIT

original mode.

RTN

Entering messages to display

in message information (MSG

INPUT)

The time (e.g. “2pm:45”) currently set on this

unit is displayed, and the mode changes to

the time setting mode.

4. Touch

hours.

on the left slide button to set

• Up to 30 characters can be entered.

• The factory default setting is “Welcome to

Optimedia”.

ADJ APPEARANCE CLOCK

1. Press the [ADJ] button to set to the adjust

mode.

SET

RTN

2. Touch [APPEARANCE].

∗ If you operate another button while you

are setting the time, the time is not

adjusted.

3. Touch

on the left of the display to

select "MSG INPUT".

ADJ-APPEARANCE

5. Touch

on the right slide button to set

[

]

ENT

MSG INPUT

minutes.

RTN

6. Touch [SET].

∗ You will hear a long beep, and the time is

set.

4. Touch [ENT].

The mode changes to the message entry

mode.

Notes:

• The clock cannot be adjusted when the power is

OFF.

5. Touch [ ]/[ ] to determine the entry

• When the battery has been removed for

maintenance or for repair, set the time again.

position.

MESSAGE INPUT

7. Press the [ADJ] button to return to the

FONT

We I come to

A-Z

TEXT

original mode.

MEMO

RTN

Displaying messages (MSG

INFO)

6. Touch

text.

on [FONT] to select the type of

Each touch of

text. For details, see page 27.

switches the type of

This function allows you to display a message

on the display when no operation is performed

for more than 30 seconds.

7. Touch on [TEXT] to determine the

character to enter.

• The factory default setting is “OFF”.

8. Repeat steps 5 to 7 to enter the message.

1. Press the [ADJ] button to set to the adjust

9. Touch [MEMO].

mode.

You will hear a long beep, and the message

is stored in memory.

2. Touch [APPEARANCE].

10. Press the [ADJ] button to return to the

original mode.

DXZ855MP

Download from Www.Somanuals.com. All Manuals Search And Download.

Common Operations

5. Press the [ADJ] button to return to the

Setting the auto-dimmer

(DIMMER IN)

original mode.

This function allows you to dim the lighting of

the display matched to the illumination or the

brightness inside your car.

Adjusting the brightness of

the display (BRIGHT)

Select either “AUTO” (interlocked to the

brightness inside your car) or “ILLUMI”

(interlocked to the illumination inside your car)

as the auto-dimmer setting.

You can adjust the brightness of the display to

match the mounting angle of the unit.

• The factory default setting is “5”.

• When the auto-dimmer function is set to

“AUTO”, the brightness of the display is

dimmed according to the brightness detected

by this sensor.

• Set the dimmer setting at DMR LEVEL.

• The factory default setting is “AUTO”.

1. Press the [ADJ] button to set to the adjust

mode.

2. Touch [APPEARANCE].

3. Touch

on the left of the display to

select “BRIGHT”.

ADJ APPEARANCE

1. Press the [ADJ] button to set to the adjust

mode.

BRIGHT

2. Touch [APPEARANCE].

RTN

3. Touch

on the left of the display to

select “DIMMER IN”.

4. Touch

on the right of the display to

ADJ APPEARANCE

adjust the brightness.

∗ This setting item can be adjusted within

the range 1 to 12.

Adjust this setting item while viewing how

the appearance of the display changes.

D I MMER IN

AUTO

RTN

4. Touch

on the right of the display to

5. Press the [ADJ] button to return to the

select “AUTO” or “ILLUMI”.

original mode.

5. Press the [ADJ] button to return to the

original mode.

Making the LED blink when

DCP is removed (BLINK LED)

Setting the dimmer level

(DMR LEVEL)

You can make the LED on this unit blink when

the DCP is removed.

This function allows you to set how much the

displayed is to be dimmed.

• The factory default setting is “OFF”.

1. Press the [ADJ] button to set to the adjust

• The factory default setting is “3”.

mode.

1. Press the [ADJ] button to set to the adjust

2. Touch [APPEARANCE].

mode.

3. Touch

on the left of the display to

2. Touch [APPEARANCE].

select “BLINK LED”.

3. Touch

on the left of the display to

ADJ APPEARANCE

select “DMR LEVEL”.

BL INK LED

OFF

ADJ APPEARANCE

DMR LEVEL

RTN

4. Touch

on the right of the display to

select “ON” or “OFF”.

4. Touch

on the right of the display to

5. Press the [ADJ] button to return to the

set the dimmer level.

∗ Select one of OFF (dimming OFF, bright),

1 (slightly dimmed) to 5 (dark).

original mode.

Download from Www.Somanuals.com. All Manuals Search And Download^D. ^XZ855MP

Common Operations

1. Press the [ADJ] button to set to the adjust

Setting the beep for when

mode.

buttons are operated (BEEP)

2. Touch [APPEARANCE].

The short or long high-pitched tone you hear

when a button is operated is called a “BEEP”.

3. Touch

on the left of the display to

select “SRC ICON”.

• The factory default setting is “ON”.

ADJ APPEARANCE

1. Press the [ADJ] button to set to the adjust

SRC I CON

I CON

mode.

2. Touch [APPEARANCE].

RTN

3. Touch

on the left of the display to

select “BEEP”.

4. Touch

on the right of the display to

select “ICON” or “SPE/ANA”.

ADJ APPEARANCE

5. Press the [ADJ] button to return to the

BEEP

OFF

original mode.

RTN

4. Touch

on the right of the display to

Setting speaker ON/OFF

(SUB-WOOFER)

select “ON” or “OFF”.

5. Press the [ADJ] button to return to the

Set the sub-woofer (SUB-WOOFER) ON/OFF.

original mode.

Be sure to set this setting to “OFF” when there

is no sub-woofer.

• The factory default setting is “ON”.

Adjusting the title scroll

speed (SCROLL SPD)

1. Press the [ADJ] button to set to the adjust

mode.

This feature allows you to slow down the scroll

speed when the scroll speed is too fast, making

it difficult to view the screen.

2. Touch [SOUND].

3. Touch

on the right of the display to

select "ON" or "OFF".

• The factory default setting is “SPEED 1”.

ADJ SOUND

1. Press the [ADJ] button to set to the adjust

SUB WOOFER

mode.

2. Touch [APPEARANCE].

RTN

3. Touch

on the left of the display to

select “SCROLL SPD”.

4. Press the [ADJ] button to return to the

ADJ APPEARANCE

original mode.

SCROLL SPD

RTN

Setting internal amplifier use

ON/OFF (AMP CANCEL)

4. Touch

on the right of the display to

Set internal amplifier use ON/OFF matched to

whether or not an external amplifier is used.

adjust the sensitivity.

∗ This setting item can be adjusted within

the range SPEED 1 to SPEED 4.

Set AMP CANCEL to “ON” (internal amplifier

use OFF) when an external amplifier is

connected and the internal amplifier is not used.

5. Press the [ADJ] button to return to the

original mode.

• The factory default setting is “OFF” (internal

amplifier used).

1. Press the [ADJ] button to set to the adjust

Setting the source icon

(SRC ICON)

mode.

2. Touch [SOUND].

You can change the source icon on the display.

• The factory default setting is “ICON”.

DXZ855MP

Download from Www.Somanuals.com. All Manuals Search And Download.

Common Operations

3. Touch

on the left of the display to

3. Touch

on the left of the display to

select “AMP CANCEL”.

select "AUX SENS".

ADJ SOUND

ADJ SETTING

AMP CANCEL

OFF

AUX

MID

SENS

RTN

4. Touch

on the right of the display to

4. Touch

set the input level.

∗ Select LOW, MID or HIGH.

Notes:

on the right of the display to

select “ON” or “OFF”.

5. Press the [ADJ] button to return to the

original mode.

• When the input level is overloaded, “OVERLOAD”

appears. Adjust AUX SENS or the input level so

that “OVERLOAD” disappears.

Displaying the Sirius ID No.

(SID DISP)

5. Press the [ADJ] button to return to the

original mode.

• This item can be set only when Sirius is

connected.

1. Press the [ADJ] button to set to the adjust

Performing a system check

(SYSTEM CHECK)

mode.

2. Touch [TUNER].

This function allows you to perform a system

check when an external equipment is connected

to this unit.

3. Touch

on the left of the display to

select “SID DISP”.

ADJ SOUND

1. Press the [ADJ] button to set to the adjust

SID DISP

123456

mode.

2. Touch [SETTING].

RTN

3. Touch

on the left of the display to

4. Touch

on the right of the display to

select “SYSTEM CHECK”.

switch between the display for the upper 6

digits and the lower 6 digits.

ADJ SETTING

[

]

SYSTEM

START

CHECK

5. Press the [ADJ] button to return to the

original mode.

RTN

4. Touch [START].

The confirmation display appears.

AUX function

This system has an external RCA input so you

can listen to sounds and music from external

devices connected to this unit.

5. Touch [OK].

ADJ SETTING

CANCEL

Setting the input level (AUX

SENS) of portable audio (AUX

mode)

After this operation, the display returns to

the original mode.

This function allows you to set the input level of

optional external devices connected to this unit.

• The factory default setting is “MID”.

1. Press the [ADJ] button to set to the adjust

mode.

2. Touch [SETTING].

Download from Www.Somanuals.com. All Manuals Search And Download^D. ^XZ855MP

Common Operations

CODE MATIC

Using the security function

(CODEMATIC)

This function prevents persons who do not know

the touch sequence from easily operating this

unit. The Touch Code display appears when

DCP is attached and the power is turned ON

with “CODEMATIC” set to “ON”.

When you touch 4 times, and 4 indicators

light, you will hear a long beep, and the

original mode is returned to.

If you touch the display in this screen in the

preset order, “SUCCESSFUL” is displayed and

the power is turned OFF.

■ To cancel CODEMATIC

If you have forgotten the touch order, either

touch [4], [1], [3] and then [2] in that order, or

press [SCN] on the remote control unit.

When the power is next turned ON, the Touch

Code display does not appear, and the main

display in the radio mode or CD mode is

displayed.

• The factory default setting is “OFF”.

Setting the slide direction of

the slide buttons (SLIDE

CONT)

1. Press the [ADJ] button to set to the adjust

mode.

2. Touch [SETTING].

This function allows you to set the direction of

the left and right slide buttons.

3. Touch

on the left of the display to

select “CODEMATIC”.

• The factory default setting is “UP ➜ +”.

ADJ SETTING

1. Press the [ADJ] button to set to the adjust

CODEMAT I C

OFF

mode.

2. Touch [SETTING].

RTN

3. Touch

on the left of the display to

2 types of items are displayed for

select “SLIDE CONT”.

“CODEMATIC”, items for which “ON” or

“OFF” is displayed at the right of the screen,

and items for which “INPUT” is displayed at

the right of the screen. Here, select the item

for which “ON” or “OFF” is displayed at the

right of the display.

ADJ SETTING

SLIDE CONT

RTN

4. Touch

on the right of the display to

select “UP ➜ +” or “DOWN ➜ +”.

4. Touch

select “ON” or “OFF”.

5. Touch on the left of the display to

select “CODEMATIC”.

on the right of the display to

5. Press the [ADJ] button to return to the

original mode.

ADJ SETTING

CODEMATIC

INPUT

RTN

Here, select the item for which “INPUT” is

displayed at the right of the display.

6. Touch [INPUT].

The Touch Code display appears.

7. Enter the touch code.

∗ Touch [1] to [4] at the bottom of the display

at random. You can also repeatedly touch

the same number.

DXZ855MP

Download from Www.Somanuals.com. All Manuals Search And Download.

8. OPERATIONS OF ACCESSORIES

CD Changer Operations

Playing time display

Î00:01: The playing time is displayed.

CD changer

When an optional CD changer is connected

through the CeNET cable, this unit can control

CD changer operations. This unit can be

connected to a total of 2 CeNET-wired CD

changers.

Track No. display

Touching

allows you to select

the track to play, or fast-forward/fast-rewind

tracks.

Title display

■ When 2 CD changers are connected

The selected title is displayed.

Press the [SRC] button to select the changer

connected to this unit. (Each press of the [SRC]

button switches the changer.)

Disc No. display

Touching

selects discs.

• If the CD changer does not contain a

magazine, “NO MAG” is displayed, and if the

magazine does not contain a CD, “NO DISC”

is displayed.

• For details on the title display, see “Switching

the title display” (cf. page 15).

Touching this pauses or resumes play.

DISP

The display contents can be changed.

a/d (only in the simple operation display)

Touching these selects the track to play.

Touching and holding these fast-forwards/fast-

rewinds tracks.

Screen displays in the

changer mode

(Only in the simple operation

● Standard operation display

The standard operation display appears by

pressing the [SRC] button to select changer

modes.

display)

Touching these buttons selects the disc to play.

CAUTION

Track No.

display

Title

display

Disc No.

display

CD-ROM discs cannot be played from every

CD changer. This depends on the model.

Note:

TELL ME

TRACK

DISC

• Some CDs recorded in the CD-R/CD-RW mode

may not be usable.

2:45

DISP

03:09

DISP

Playing time

display

● Simple operation display

Pressing and holding [MODE] button for 2

seconds or longer switches the simple operation

display.

a/d

TELL ME

TRACK

DISC

2:45

DISP

03:29

Download from Www.Somanuals.com. All Manuals Search And Download^D. ^XZ855MP

CD Changer Operations

Selecting the changer mode

Fast-forward/fast-rewind

1. Press the [SRC] button to select the changer

mode.

1. To fast-forward, touch

display.

on the track

∗ Each time you press the [SRC] button, the

2. To fast-rewind, touch

display.

on the track

display switches as follows:

Radio ➜ (SIRIUS) ➜ CD/MP3 ➜

(CD changer) ➜ (DVD changer) ➜ (TV) ➜

AUX ➜ Radio...

Scan play

Scan play locates and plays the first 10 seconds

of each track on a disc automatically. This

function continues on the disc until it is

canceled.

∗ The mode of equipment that is not

connected is not displayed.

Play starts automatically when the mode

changes to the changer mode.

The scan play function is useful when you want

to select a desired track.

Pausing play

1. Press the [MODE] button.

1. Touch [s].

2. Touch [TRACK-SCAN].

∗ Scan play starts from the next track after

the track currently being played.

■ To resume play

1. Touch [s] again.

■ To cancel scan play

1. Press the [MODE] button.

Selecting a CD

1. Touch

select a disc.

Play starts.

on the disc No. display to

Disc scan play

Disc scan play locates and plays the first 10

seconds of the first track on each disc in the

currently selected changer. This function

continues automatically until it is canceled.

∗ If magazine does not contain the disc you

selected, the No. for that disc is not

displayed.

Disc scan play is useful when you want to select

a desired disc.

Selecting a track

1. To listen to the next track, touch

track display.

1. Press the [MODE] button.

2. Touch [DISC SCAN].

on the

∗ Disc scan play starts from the next disc

after the disc currently being played.

2. To listen to the previous track, touch

twice on the track display.

■ To cancel disc scan play

1. Press the [MODE] button.

Touching

touch

plays the next track. If you

more times, the track advances

ahead to the track for the number of times

you touched

Touching

you touch

back to the track for the number of times you

touched

and that track is played.

plays the previous track. If

more times, the track moves

Repeat play

Repeat play continuously plays the current track.

This function continues automatically until it is

canceled.

and that track is played.

twice on the track display

∗ If you touch

1. Press the [MODE] button.

2. Touch [TRACK RPT].

while the start of the track is being played,

the track 2 tracks back is sometimes

played.

■ To cancel repeat play

1. Press the [MODE] button.

DXZ855MP

Download from Www.Somanuals.com. All Manuals Search And Download.

CD Changer Operations

Disc repeat play

After all the tracks on the current disc have

been played, disc repeat play automatically

replays the current disc over from the first track.

This function continues automatically until it is

canceled.

1. Press the [MODE] button.

2. Touch [DISC RPT].

■ To cancel disc repeat play

1. Press the [MODE] button.

Random play

Random play selects and plays individual tracks

on the disc in no particular order. This function

continues automatically until it is canceled.

1. Press the [MODE] button.

2. Touch [TRACK RDM].

■ To cancel random play

1. Press the [MODE] button.

Disc random play

The disc random play selects and plays

individual tracks or discs automatically in no

particular order. This function continues

automatically until it is canceled.

1. Press the [MODE] button.

2. Touch [DISC RDM].

■ To cancel disc random play

1. Press the [MODE] button.

Download from Www.Somanuals.com. All Manuals Search And Download^D. ^XZ855MP

TV Operations

Reception band display

TV tuner function

TV1 : Band name

When an optional TV tuner is connected through

the CeNET cable, this unit controls all TV tuner

functions. To watch TV, you need a TV tuner and

a monitor.

Preset No. display

Touching

on the right slide button in the

standard operation display selects a preset

memory.

Touching [PRESET] displays the preset memory

number list.

Screen displays in the TV

mode

PS/AS

Touching this starts a preset scan.

Touching and holding this for 2 seconds or

longer starts an auto store.

Touching this during the preset scan/auto scan

ends the operation.

● Standard operation display

The standard operation display appears by

pressing the [SRC] button to select the TV

mode.

Reception

Channel display

band display

Preset No.

display

BAND

Touching this switches the reception band.

Touching and holding this for 1 second or longer

toggles between the manual tuning mode and

the seek tuning mode.

Title display

3ch

TV1

a/d (only in the simple operation display)

Touching these buttons enables seek tuning or

step tuning (in the manual tuning mode).

Touch and holding these buttons enables quick

tuning (in manual tuning mode).

MANU

P.CH

2:45

PRESET

BAND

PS AS

DISP

PRESET

PS/AS

BAND

SEEK/MANU

indicator

DISP

The display contents can be changed.

● Simple operation display

Pressing and holding the [MODE] button for 2

seconds or longer switches the simple operation

display.

Selecting the TV mode

1. Press the [SRC] button to select the TV

mode.

a/d

Each press of the [SRC] button switches the

mode as follows:

Radio ➜ (SIRIUS) ➜ CD/MP3 ➜

(CD changer) ➜ (DVD changer) ➜ (TV) ➜

AUX ➜ Radio...

TV1

MANU

3ch

P.CH

2:45

PRESET

BAND

PS AS

DISP

∗ The mode of equipment that is not

connected is not displayed.

Channel display

3ch: The channel currently being received is

displayed.

Switching the reception band

1. Touch [BAND] to switch the reception band.

Each touch of [BAND] switches the

reception band.

Touching

in the standard

operation display allows you to perform seek

tuning or manual tuning.

Title display

The name of the station currently being received

is displayed.

TV1 ➜ TV2 ➜ TV1...

VTR : In video mode

Touching these switches the display.

DXZ855MP

Download from Www.Somanuals.com. All Manuals Search And Download.

TV Operations

Seek tuning

Preset memory

Seek tuning is a function for automatically tuning

stations with good reception.

A total of 12 TV stations can be stored (6-TV1

and 6-TV2). This allows you to select your

favorite TV stations and store them in memory

for later recall.

1. Touch and hold [BAND] for 1 second or

longer while “MANU” is displayed.

Automatic tuning is possible when “SEEK” is

displayed.

1. Touch [BAND] to switch the reception band.

2. Operate the channel display to select the

station to store to.

2. Touch

on the channel display.

“SEEK UP/SEEK DOWN” is displayed, and

tuning starts.

Tuning automatically stops at stations with

good reception.

3. Touch [PRESET].

The preset memory No. list is displayed.

4. Touch and hold the preset No. to store for 2

seconds or longer.

You will hear a long beep, and the station is

stored in memory.

■ To cancel tuning

1. Touch

on the channel display again.

Auto store

Manual tuning

Auto store selects 6 TV stations automatically

and stores each one into preset memory.

There are 2 ways available: quick tuning and

step tuning.

1. Touch and hold [PS/AS] for 2 seconds or

longer.

In the step tuning mode, the frequency changes

1 step at a time. In the quick tuning mode, you

can quickly tune the desired frequency.

“A-STORE” appears on the display.

∗ Stations with good reception are

automatically searched, and are stored to

preset memory (No.1 to No.6) in order

from the station having the lowest

frequency.

1. Touch and hold [BAND] for 1 second or

longer if “SEEK” is displayed.

Manual tuning is possible when “MANU” is

displayed.

2. Operate the channel display to tune to a

channel on which there is a broadcast.

● Step tuning

Notes:

• When auto store is performed, stations stored to

memory so far are cleared.

Touch

● Quick tuning

Touch

stops when you take your finger away from

the panel.

on the channel display.

• When there are fewer than 6 stations with good

reception, low frequencies are automatically

returned to, and auto store is performed again. If

there are fewer than 6 stations even after auto

store is performed twice, stations stored so far

remain in memory.

on the channel display. Tuning

Recalling a preset station

Preset scan

This function allows the user to select a preset

station.

Preset scan is a function for receiving stations in

the order that they are currently stored to preset

No. so that broadcasts can be checked.

1. Touch [PRESET].

The preset memory No. list is displayed.

1. Touch [PS/AS].

2. Touch the preset memory No.

“P-SCAN” appears on the display.

∗ The currently stored stations are received

in order for 7 seconds or longer each.

Stations with poor reception are skipped,

and the next station is received.

∗ The station can also be tuned by touching

in the standard operation display.

■ To cancel tuning

1. Touch [RTN].

Download from Www.Somanuals.com. All Manuals Search And Download^D. ^XZ855MP

TV Operations

■ To cancel the preset scan

1. Touch [PS/AS].

“P-SCAN” disappears, and the stations that

were being received when [PS/AS] was

touched are received next.

Watching a video

The TV tuner has a VTR input terminal to which

1 external device can be connected. Connect a

12 V video cassette player (VCP) or video

cassette recorder (VCR) to the TV tuner input

terminal.

1. Press the [MODE] button.

2. Touch [TV/VTR].

∗ Every time you touch this, the function

switches between TV and VTR.

Setting the TV Diver

You can change the reception setting for the TV

antenna connected to the TV tuner.

• Set this item to “OFF” when a TV diversity

antenna is not in use.

• The factory default setting is “ON”.

1. Press the [ADJ] button to set to the adjust

mode.

2. Touch [TUNER].

3. Touch

on the left of the display to

select [TV DIVER].

ADJ TUNER

TV DIVER

RTN

4. Touch

on the right of the display to

select [ON] or [OFF].

5. Press the [ADJ] button to return to the

original mode.

DXZ855MP

Download from Www.Somanuals.com. All Manuals Search And Download.

9. IN CASE OF DIFFICULTY

Problem

Cause

Fuse is blown.

Measure

Power does not

turn on.

Replace with a fuse of the same amperage. If the

fuse blows again, consult your store of purchase.

(No sound is

produced.)

Incorrect wiring.

Consult your store of purchase.

No audio when

Amplifier turn-on lead is

Turn the unit off and check each wire for a possible

short. If the amplifier turn-on lead shorts out, cover it

operating the unit shorted to ground or

with amplifiers.

excessive current is required. with insulation such as tape.

Reset button

Nothing happens The microprocessor has

when buttons are malfunctioned due to noise,

Turn off the power, then

remove the DCP by

referencing "Removing

the DCP" (cf. page 10).

Press the reset button for

about 2 seconds with a

thin rod.

pressed.

etc.

Display is not

accurate.

DCP or main unit connectors Wipe the dirt off with a soft cloth moistened with

are dirty.

cleaning alcohol.

No sound heard. The speaker protection

circuit is operating.

1. Check the speaker connection.

2. Turn down sound volume. Function can also be

restored by turning the power off and on again.

3. If the sound is muted again, consult your store of

purchase.

No sound heard. There is a disc other than a

compact disc or foreign

With the SLOPING CONSOLE open, press and hold

the [Q] button for 3 seconds or longer.

matter already in place.

The foreign matter is forcibly ejected.

MP3/WMA files are absent in Write MP3/WMA files onto the disc properly.

a disc.

Files are not recognized as

an MP3/WMA file.

Use MP3/WMA files encoded properly.

File system is not correct.

Use ISO9660 level 1, 2 or JOLIET or Romeo file

system.

Sound skips or is Disc is dirty.

Clean the disc with a soft cloth.

noisy.

Disc is heavily scratched or

warped.

Replace with a disc with no scratches.

Sound is cut or

skipped.

Noise is

MP3/WMA files are not

encoded properly.

Use MP3/WMA files encoded properly.

generated or

noise is mixed

with sound.

Download from Www.Somanuals.com. All Manuals Search And Download^D. ^XZ855MP

Problem

Cause

Measure

Water droplets may form on

the internal lens when the

car is parked in a humid

place.

Let dry for about 1 hour with the power on.

Sound is bad

directly after

power is turned

on.

File system is not correct.

Use ISO9660 level 1, 2 or JOLIET or Romeo file

system.

Wrong filename

File name or extension is not Use alphanumeric/ASCII characters for MP3/WMA

Play list play is

not performed.

correct.

file name.

Use “.M3U” for the file extension of a play list.

DXZ855MP

Download from Www.Somanuals.com. All Manuals Search And Download.

10. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.

Take the measures described below to eliminate the problem.

Error Display

ERROR 2

Cause

Measure

A DISC is caught inside the CD deck and is

not ejected.

This is a failure of CD deck’s mechanism and

consult your store of purchase.

ERROR 3

ERROR 6

ERROR 2

ERROR 3

ERROR 6

ERROR 2

ERROR 3

ERROR 6

A DISC cannot be played due to scratches,

etc.

Replace with a non-scratched,

non-warped-disc.

A DISC is loaded upside-down inside the

CD deck and does not play.

Eject the disc then reload it properly.

A DISC inside the CD changer is not

loaded.

This is a failure of CD changer’s mechanism

and consult your store of purchase.

A DISC inside the CD changer cannot be

played due to scratches, etc.

Replace with a non-scratched, non-warped

disc.

A DISC inside the CD changer cannot be

played because it is loaded upside-down.

Eject the disc then reload it properly.

A DISC inside the DVD changer cannot be

played.

This is a failure of DVD mechanism and con-

sult your store of purchase.

A DISC cannot be played due to scratches,

etc.

Retry or replace with a non-scratched, non-

warped-disc.

A DISC inside the DVD changer cannot be

played because it is loaded upside-down.

Eject the disc then reload it properly

Set the correct Parental level.

ERROR P

ERROR R

Parental level error

Region code error

Eject the disc and replace correct region

code disc.

AMP GUARD

The speaker protection circuit is operating.

During this operation, if any volume

operation is performed, the display shows

“AMP GUARD”.

“AMP GUARD” sometimes functions when

special test signals are used.

1. Turn down sound volume. Function can

also be restored by turning the power off

and on again.

(Speaker volume is reduced automatically

when the speaker protection circuit oper-

ates).

2. If the sound is muted again, consult our

service department.

If an error display other than the ones described above appears, press the reset button. If the problem

persists, turn off the power and consult your store of purchase.

Download from Www.Somanuals.com. All Manuals Search And Download^D.^XZ855MP

11. SPECIFICATIONS

FM Tuner

Frequency Range:

Audio

Maximum Power Output:

87.9 MHz to 107.9 MHz

212 W (53 W × 4 ch)

Usable Sensitivity:

9 dBf

Continuous Average Power Output:

18 W × 4, into 4 Ω, 20 Hz to 20 kHz, 1%THD

50dB Quieting Sensitivity:

15 dBf

Bass Control Action (50 Hz):

12 dB

Alternate Channel Selectivity:

70 dB

Treble Control Action (12.5 kHz):

12 dB

Stereo Separation (1 kHz):

32 dB

Line Output Level (CD 1 kHz):

4 V/F 2ch + 4V/R 2ch

4 V/SUB WOOFER 2ch

Frequency Response ( 3 dB):

30 Hz to 15 kHz

General

Power Supply Voltage:

14.4 V DC (10.8 to 15.6 V allowable), negative

ground

AM Tuner

Frequency Range:

530 kHz to 1710 kHz

Current Consumption:

Less than 15 A, 3A

Usable Sensitivity:

25 µV

Speaker Impedance:

4 Ω (4 Ω to 8 Ω allowable)

Weight / Source unit:

3.74 lb. (1.7 kg)

CD Player

System:

Compact disc digital audio system

Weight / Remote control unit:

1.41 oz. (40 g) (including battery)

Usable Discs:

Compact disc

Dimensions / Source unit:

7" (Width) × 2" (Height) × 6-5/16" (Depth)

[178 (W) × 50 (H) × 160 (D) mm]

Dimensions / Remote control unit:

1-3/4" (Width) × 4-7/16" (Height) × 1/2" (Depth)

[44 (W) × 113 (H) × 13 (D) mm]

Frequency Response ( 1 dB):

5 Hz to 20 kHz

Signal to Noise Ratio (1 kHz):

100 dB

Dynamic Range (1 kHz):

96 dB

Harmonic Distortion:

0.01%

Note:

• Specifications and design are subject to change without notice for further improvement.

DXZ855MP

Download from Www.Somanuals.com. All Manuals Search And Download.

Download from Www.Somanuals.com. All Manuals Search And Download^D. ^XZ855MP

Clarion Co., Ltd.

PE-2749B

280-8189-00

Printed in China / Imprimé en Chine / Impreso en China

2005/1 (Abe·Abe)

Download from Www.Somanuals.com. All Manuals Search And Download.

Cisco Systems Network Hardware NM 16AM V2 User Manual
Cooper Lighting Landscape Lighting CCX20RWH User Manual
Craftsman Planer 17226729 User Manual
Crate Amplifiers Musical Instrument Amplifier G200CXL User Manual
Danby Dehumidifier DDR25E User Manual
Danby Refrigerator DAR1102BSL User Manual
Edelbrock Automobile 4760 User Manual
EverFocus Automobile Electronics EZ PLATECAM2 002 User Manual
GE Air Conditioner PDW9880J User Manual
Genicom Printer microLaser 210 User Manual