EDGE Tech Computer Drive 3126 User Manual

Caterpillar 3126 B & E models  
Edge EZ Module  
Installation Instructions & Manual  
OLD P/N: ECAT1000  
NEW P/N: 50200  
Download from Www.Somanuals.com. All Manuals Search And Download.  
THIS IS A HIGH PERFORMANCE PRODUCT. USE AT YOUR OWN RISK.  
Do not use this product until you have carefully read the following agreement.  
This sets forth the terms and conditions for the use of this product. The installation of this product indicates  
that the BUYER has read and understands this agreement and accepts its terms and conditions  
DISCLAIMER OF LIABILITY  
Edge Products Inc. and its successors, distributors, jobbers, and dealers (hereafter SELLER) shall in no way be responsible for the  
product's proper use and service. THE BUYER HEREBY WAIVES ALL LIABILITY CLAIMS.  
The BUYER acknowledges that he/she is not relying on the SELLER’s skill or judgment to select or furnish goods suitable for any  
particular purpose and that there are no liabilities which extend beyond the description on the face hereof and the BUYER hereby  
waives all remedies or liabilities, expressed or implied, arising by law or otherwise, (including without any obligations of the SELLER  
with respect to fitness, merchantability and consequential damages) or whether or not occasioned by the SELLER's negligence.  
The SELLER disclaims any warranty and expressly disclaims any liability for personal injury or damages. The BUYER  
acknowledges and agrees that the disclaimer of any liability for personal injury is a material term for this agreement and the BUYER  
agrees to indemnify the SELLER and to hold the SELLER harmless from any claim related to the item of the equipment purchased.  
Under no circumstances will the SELLER be liable for any damages or expenses by reason of use or sale of any such equipment.  
The SELLER assumes no liability regarding the improper installation or misapplication of its products.  
It is the installer's responsibility to check for proper installation and if in doubt, contact the manufacturer.  
LIMITATION OF WARRANTY  
Edge Products Inc. (hereafter "SELLER") gives Limited Warranty as to description, quality, merchantability, fitness for any product’s  
purpose, productiveness, or any other matter of SELLER's product sold herewith. The SELLER shall be in no way responsible for  
the product’s open use and service and the BUYER hereby waives all rights other than those expressly written herein. This  
Warranty shall not be extended or varied except by a written instrument signed by SELLER and BUYER.  
The Warranty is Limited to one (1) year from the date of sale and limited solely to the parts contained within the product's kit. All  
products that are in question of Warranty must be returned shipping prepaid to the SELLER and must be accompanied by a dated  
proof of purchase receipt. All Warranty claims are subject to approval by Edge Products Inc.  
If the BUYER sends back a failed unit that is out of warranty and chooses to buy a refurbished unit, the refurbished unit will only  
carry a 60 day warranty. If the BUYER purchases a new unit at a predetermined discounted rate, it will have the standard 1  
year warranty.  
Under no circumstances shall the SELLER be liable for any labor charged or travel time incurred in diagnosis for defects, removal,  
or reinstallation of this product, or any other contingent expenses.  
Under no circumstances will the SELLER be liable for any damage or expenses insured by reason of the use or sale of any such  
equipment.  
IN THE EVENT THAT THE BUYER DOES NOT AGREE WITH THIS AGREEMENT: THE BUYER MAY PROMPTLY  
RETURN THIS PRODUCT, IN A NEW AND UNUSED CONDITION, WITH A DATED PROOF OF PURCHASE, TO  
THE PLACE OF PURCHASE WITHIN SIXTY (60) DAYS FROM DATE OF PURCHASE FOR A FULL REFUND.  
THE INSTALLATION OF THIS PRODUCT INDICATES THAT THE BUYER HAS READ AND UNDERSTANDS THIS  
AGREEMENT AND ACCEPTS ITS TERMS AND CONDITIONS.  
It is strongly recommended that EGT gauges and boost gauges be installed with  
the use of this product.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
THIS PRODUCT AND THE BOOST ELBOW (if installed) MUST BE REMOVED WHEN  
TAKING VEHICLE TO VEHICLE DEALERSHIP OR OTHER SERVICE FACILITY!!  
LEAVING PRODUCT INSTALLED MAY AFFECT DEALER DIAGNOSTIC ANALYSIS AND  
SCAN TOOL FUNCTIONS!!  
This warranty is void for any new products purchased through auction  
websites. Warranty is valid only for new products purchased through  
Authorized Dealers (proof of purchase required for all warranty claims).  
All Edge modules and programmers are built to operate with OEM calibrations. When you  
take your vehicle to a service center they may, by your request or otherwise, update your  
vehicles calibrations. Therefore it is important that you return your vehicle to stock  
before taking it in for service. Edge updates its active products (i.e. those currently being  
manufactured) to work effectively with updated OEM calibrations. However, this process  
can take some time as Edge is not always made aware of calibration changes made by the  
OEM. In the case of discontinued products, Edge cannot ensure that your unit will work  
effectively if you take your vehicle to a dealership and you are given, by your request or  
otherwise, a new calibration.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation Instructions  
Please read these instructions through completely and thoroughly  
understand each step prior to installation.  
IMPORTANT: Read all Disclaimer, Warranty, and Installation Instructions  
before installing product  
Supplied Items:  
1. Power Edge EZ CAT Module  
2. Three Wire Ties  
3. Two Velcro Strips  
4. One hose clamp  
5. One Brass Elbow  
Items required: (for optional boost elbow installation)  
1. Pliers  
2. 7/16” Wrench  
3. 3/8” Drive Ratchet  
4. ¼” Socket  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Module Installation  
Harness Connector Your ECAT1000 module may be equipped with a  
harness that can be disconnected at the module itself (See figure 1A). It is  
important to make sure that your ECAT1000 module is always connected to the  
harness when the wiring harness is connected to the vehicle, otherwise the vehicle  
may not run properly, or may trip engine “codes.”  
FIGURE 1A  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Boost Sensor  
Connection  
Boost Sensor  
1. The boost sensor is  
located on the  
driver’s side of the  
engine as shown in  
the photo.  
Disconnect the  
stock connector and  
plug in the supplied  
connectors that are  
located closest to  
the Power Edge EZ  
CAT module.  
IAP Sensor Connectors  
IAP Sensor Connection  
2. The IAP sensor is located on the driver’s side towards the front of the engine.  
Disconnect the stock connector and plug in the connectors located at the end of  
the EZ CAT harness (furthest from the module).  
Final Inspection and Operation  
3. The EZ CAT Module can mount on or near the firewall. Adhere the module  
using the supplied velcro.  
4. Recheck all connections, fittings and fasteners for a properly secure  
installation.  
5. Using the supplied wire ties, secure the wiring harness from possible damage.  
Boost Elbow Installation (Optional)  
The installation of the brass elbow permits the turbo boost pressure to increase  
without the wastegate opening. The Power Edge EZ CAT Module will operate  
equally well with or without this installed.  
6. Using the pliers, remove the crimp style clamp from the hose on the stock brass  
elbow located on the bottom side of the turbocharger. Remove the hose from  
the brass elbow and dispose of the crimp style clamp.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
7. Using the 7/16” wrench, unscrew the stock brass elbow out of the turbocharger  
housing. Using the 7/16” wrench, install the supplied brass elbow, tighten-be  
careful not to over-tighten. Slip the supplied hose clamp onto the stock hose,  
install the stock hose onto the newly installed brass elbow and tighten the hose  
clamp with the ¼” socket.  
Fueling Adjustment  
The Power Edge EZ CAT Module features 4 different levels of fueling. The Module  
is set default to level 2.  
1. To change settings remove the front panel by using a 3/32” allen wrench to  
remove the two screws.  
2. Below the cover the 3 jumper settings on the right side are used for the power  
level adjustment.  
3. The two jumpers can be repositioned in any of the locations shown below to  
achieve the desired response.  
Jumpers  
Jumpers  
Jumpers  
Jumpers  
EZ PC Board  
EZ PC Board  
EZ PC Board  
EZ PC Board  
Power Level 3  
Power Level 4  
Power Level 2  
Power Level 1  
Power Gains  
The following power gains are representative of an actual test vehicle. Power gains  
may vary somewhat on a different vehicle or in different geographic settings.  
Level 1:  
Level 2:  
Level 3:  
Level 4:  
25 HP  
30 HP  
35 HP  
40 HP  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Technical Support:  
888-360-3343  
To expedite your support call, please have part number (i.e.,  
EAF2100A), version number, and Date of Manufacture ready prior to  
calling support.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 

Cisco Systems Network Router 46 User Manual
Closet Maid Indoor Furnishings S25RPDW5 User Manual
Country Home Products Lawn Mower SUBURBANTM User Manual
Crate Amplifiers Musical Instrument Amplifier GLX30 User Manual
Curtis Camcorder KCR2614A User Manual
Fender Musical Instrument Amplifier FM 65 DSP User Manual
Fostex Computer Drive MR 8HD CD User Manual
FUNAI VCR SE447SG User Manual
Gefen Switch 8x1 DVI User Manual
Gitzo Camcorder Accessories G1257LVL User Manual