RSA SecurID Ready Implementation Guide
Last Modified: January 7, 2008
Partner Information
Product Information
Partner Name
Cisco Systems
Web Site
Product Name
Cisco VPN Client
Version & Platform
Product Description
4.6, 4.8, and 5.0.02.0090
Simple to deploy and operate, the Cisco VPN Client allows organizations to
establish end-to-end, encrypted VPN tunnels for secure connectivity for
mobile employees or teleworkers. This thin design, IP security (IPSec)-
implementation is compatible with all Cisco virtual private network (VPN)
products.
Product Category
Perimeter Defense (Firewalls, VPNs & Intrusion Detection)
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Requirements
Partner Product Requirements: Cisco VPN Client
Memory
34 MB
Storage
50 MB
Operating System
Platform
Windows XP
Required Patches
SP2 or later
Windows 2000
Windows Vista
SP2 or later
All versions as of date listed above
Additional Hardware Requirements:
The Cisco VPN Client is compatible with the following Cisco products
•
•
•
•
Cisco VPN 3000 Series Concentrator Software Version 3.0 or later
Cisco IOS Software Release 12.2(8)T or later
Cisco PIX Security Appliance Software Version 7.0 or later
Cisco ASA 5500 Series Software Version 7.0 or later
The Cisco VPN Client integrates with the RSA Software Token and RSA SecurID 800 token so that users
only have to enter a PIN; where the tokencode is automatically pulled into the client. The following table
shows what Cisco products support this feature.
RSA Software Token and RSA SecurID 800 Integration Compatibility Matrix
Native RSA SecurID
Authentication
RADIUS Authentication
Cisco Product
Cisco VPN 3000 Series
Cisco IOS Software
Cisco PIX Security Appliance
Cisco ASA 5500 Series
Yes
N/A
Yes
Yes
Yes*
No
Yes*
Yes*
* Needs RadiusSDI set to 1 for this to function. See the Cisco VPN client
profile configuration section for information.
Important: The RSA Software Token and RSA SecurID 800 Integration
is a Windows only solution.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Partner Authentication Agent Configuration
Before You Begin
This section provides instructions for integrating the partners’ product with RSA SecurID Authentication.
This document is not intended to suggest optimum installations or configurations.
It is assumed that the reader has both working knowledge of all products involved, and the ability to
perform the tasks outlined in this section. Administrators should have access to the product
documentation for all products in order to install the required components.
All vendor products/components must be installed and working prior to the integration. Perform the
necessary tests to confirm that this is true before proceeding.
Documenting the Solution
Cisco VPN Client Configuration
1. Install the Cisco VPN client and then start the application.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Click the New button to create an RSA SecurID connection entry. Fill in the appropriate information for the
connection. The group name and password must match the entry you create on the VPN server device.
3. Click Save.
4. Highlight the connection created and click connect.
5. The user will be prompted for authentication information.
RSA Software Token and RSA SecurID 800 Integration:
RSA Software Token and RSA SecurID 800 Token integration with the Cisco VPN client is dependent on
the Cisco VPN server. See the comparability matrix under the Product Requirements section for more
details. If the Cisco VPN client detects that the RSA Software Token or RSA SecurID 800 Token is
installed (through the presence of stauto32.dll), users will be prompted for their PIN only. The tokencode
displayed on the RSA Software Token or RSA SecurID 800 Token is automatically coupled with the PIN
and passed along to the RSA Authentication Manager. You can turn on and off the option for the PIN
only prompt when using the Cisco VPN client 4.x. See the Cisco VPN client profile configuration
parameters section for more information.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Cisco VPN client profile configuration parameters:
You can enable and disable the ability of the Cisco VPN client to only prompt the user for their PIN when
using the RSA Software Token or the RSA SecurID 800 Token by adding the following setting in your
profile file. This file is located by default in Program Files\Cisco Systems\VPN Client\Profiles. The file
name is the name of the connection entry with a .pcf extension.
SDIUseHardwareToken = 0 or 1
0 = Yes use RSA Software Token (default)
1 = No, ignore RSA Software Token installed on the PC.
You can also change the prompts displayed to a user that is authenticating using RADIUS to better
resemble an RSA SecurID authentication by setting the following parameter in the profile file.
Note: This setting will also allow the RSA Software Token and RSA
SecurID 800 automation to work when using RADIUS as the authentication
method with some Cisco VPN servers. See the comparability matrix under
the Product Requirements section of this guide along with the Cisco
documentation for more details.
RadiusSDI
0 = No (default)
1 = Yes
See the Cisco VPN client documentation for more information on these and other settings that can be
used.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Certification Checklist
See the RSA Security Implementation guide for each Cisco VPN server device for certification testing
information.
df
7
Download from Www.Somanuals.com. All Manuals Search And Download.
|