XDMA6630
INSTALLATION/OWNER'SꢀMANUAL
CDꢀReceiverꢀwithꢀDetachableꢀFace
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6630ꢀINSTALLATIONꢀ
WiringꢀDiagram
RCA Preamp Output
Connections
REAR/SUB
(selectable)
FRONT
FRONT R/SUB
L-CH
R-CH
REMOTE IN
Antenna
Connector
Steering Wheel Interface Input
(PAC SWI-PS required)
BLACK Bluetooth Microphone Input
Connect the included
Bluetooth microphone.
Bluetooth Microphone
(must be connected for Bluetooth functionality)
FUSE
When replacing the fuse,
make sure new fuse is the
correct type and amperage.
Using an incorrect fuse
could damage the radio.
The XDMA6630 uses one
10 amp ATM fuse located
beside the wiring connector.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6630ꢀOPERATIONꢀ
ControlꢀLocationsꢀ-ꢀReceiver
5
1
2
3
4
6
7
8
9
10
21
20
19
18
17
16
15
14
13
12
11
Tune / Track Up
Release
Talk
Preset 2 / Random
1
2
3
4
5
6
7
8
9
15
16
17
18
19
20
Tune / Track Down
Band / ESC
Preset 4 / Play / Pause
CD Eject
Mode
10
Audio / Menu
Power ( ) / Select
Display
11 USB Port
Scan / Preset Scan
Mute / Loud
12 Auxiliary Input
Preset 1 / Repeat
Preset 3 / Intro
13
14
Preset 6 / Folder Up
21 End Call
Preset 5 / Folder Down
6
7
8
9
10 11
12 13 14
LCDꢀꢀIcons
5
4
3
2
1
Folder Name
Album Name
Song Title
Bluetooth Connected
Phone Call
Loudness
1
2
3
4
5
6
7
11
12
13
14
®
iPod Device Connected
Stereo/Mono
USB Device Connected
CD Loaded
8
File Name
Repeat Song
9
Artist Name
Random Song Playback
10
4
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6630ꢀOPERATION
ControlꢀLocationsꢀ-ꢀRemote
1
2
3
4
5
6
7
8
21
20
19
18
9
10
11
12
17
16
13
15
14
Mode
Key 9
12
13
14
15
16
17
18
19
20
21
1
2
Power ( )/Select
Volume Up
Mute / End Call
Key 0 / Display
Talk
3
Audio / Menu
4
Tune / Track Up
Volume Down
Scan / PS / Key #
Preset 3 / Intro
Key 8
5
Key 7
6
Preset 4 / Play / Pause
Preset 1 / Repeat
Band / ESC / Key *
Tune / Track Down
7
8
Preset 2 / Random
9
Preset 6 / Folder Up
Preset 5 / Folder Down
10
11
5
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6630ꢀOPERATION
GeneralꢀOperation
FaceplateꢀRemoval
Press RELEASE and pull away from the left side to remove.
To re-install, insert right side of faceplate first then push
left side to secure.
Semi-Permanentꢀ Remove trim ring and install supplied #1 x 7/32” Phillips
FaceplateꢀInstallation
head screw through left side of mounting frame into faceplate.
PowerꢀOn/Off
Press
or any other button (except eject) to turn the unit on.
Inserting a disc will turn the unit on automatically. Press and
hold to turn the unit off.
ꢀ
Mode
Press MODE to select between AM/FM, CD player, operation
iPod, USB, auxiliary input and Bluetooth modes. Modes of
operation are indicated in the display.
Note: CD mode will not appear unless a CD is inserted. USB
mode will not appear unless a USB device is connected.
Operation of iPod mode will not appear unless an iPod device
is connected.
AuxiliaryꢀInput
Insert 3.5 mm plug to connect your portable audio device.
SteeringꢀWheelꢀInterfaceꢀ The steering wheel interface input located on the back of the
Inputꢀ head unit allows connection to the PACꢀ(PacificꢀAccessoryꢀ
Corporation)ꢀSWI-PS interface module (sold separately). Visit
To configure steering wheel controls, follow the instructions
provided with the PACꢀSWI-PS interface module. After
installing the interface module, insert the module's 3.5mm
jack into the port on the back of the head unit.
Volume
Mute
Adjust volume using volume knob (00-46).
Press MUTE to silence the audio. “MUTE” will flash in the
display. Press MUTE again to cancel.
Reset
Display
Press to RESET the unit upon initial installation or if
abnormal operation occurs. The reset button is located
behind the faceplate.
Press DISP to select between clock and different types of
information, such as radio frequency, CD track or MP3 CD/
USB song information.
SetꢀtheꢀClock
With the unit on, press and hold DISP until the clock begins
to flash, then release. Press TUNE
to adjust the
nn
hours and TUNEꢀ
to adjust the minutes. Press DISP
ll
momentarily to save the selected time.
12/24-HourꢀClock
The clock will display 12-hour AM/PM time in USA frequency
:
spacing mode (PM 10 00). In European frequency spacing
mode, the clock will display 24-hour time (22:00).
6
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6630ꢀOPERATION
GeneralꢀOperation
Press and hold AUDIO/MENU for more than 3 seconds to access the
setup menu, then press AUDIO/MENU to cycle through menu options.
When desired option appears in the display, rotate the volumeꢀknob
left/right to adjust or activate the desired function. Press ESC to exit
the menu at any time.
SetupꢀMenu
SetupꢀMenu
MenuꢀFunction
Options
Action
AutoꢀStationꢀ
Store
AUTO PGM
STATIONS
Press SELECT to seek and save 6 strong stations in the
current band. (Tunerꢀmodeꢀonly)
LOCAL OFF
LOCAL ON
Activates distance tuning.
Local/Distanceꢀ
Tuning
Activates local tuning for strong station reception only.
Programs the unit to USA tuner spacing.
FREQ'NCY USA
FREQ'NCY EURO
Tuner
Frequency
Spacing
(200kHz for FM and 10kHz for AM). (Tunerꢀmodeꢀonly)
Programs the unit to European tuner spacing.
(50kHz for FM and 9kHz for AM). (Tunerꢀmodeꢀonly)
CLOCK OFF
CLOCK ON
AUX-IN ON
AUX-IN OFF
Programs unit to not display the clock when the power is off.
Programs unit to display the clock when the power is off.
Enables the front panel 3.5mm auxiliary input.
Disables the auxiliary input.
Clockꢀ
Display
Auxiliaryꢀ
Input
REAR/SUB SUB Programs the Rear/Sub RCA preamp output to subwoofer.
REAR/SUB REAR Programs the Rear/Sub RCA preamp output to rear.
Rear/Sub
RCAꢀoutput
BEEP OFF
BEEP ON
Disables the button confirmation beep.
Beepꢀ
Confirmation
Programs the unit to beep with every button press.
Programmableꢀ
TurnꢀOnꢀVolume
Programs unit to always turn on at a specific volume
(default is OFF). Any volume level 1-46 can be selected.
PROG-VOL #
MESSAGE OFF Disables power on message. (example: GOOD MORNING)
MESSAGE ON Enables power on message to be displayed.
Powerꢀonꢀ
Message
SCROLL 15 SEC Programs the unit to scroll once every 15 seconds.
Programs unit to scroll once, then show the first 10
SCROLL ONCE
Scrollingꢀ
Option
characters on the display.
SCROLL ON
SCROLL OFF
Programs unit to scroll continuously.
Programs unit to show the first 10 characters on the display.
DIMMER HIGH Programs unit to the brightest illumination level.
DIMMER MEDIUM Programs unit to the middle illumination level.
Illuminationꢀ
Dimmer
DIMMER LOW
DEMO OFF
DEMO ON
Programs unit to the dimmest illumination level.
Disables the demonstration mode.
Demonstrationꢀ
Mode
Enables the demonstration message.
See page 24 for Bluetooth setup menu options.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6630ꢀOPERATION
GeneralꢀOperation
Escape Press ESC to exit any menu adjustment mode.
Audio Press AUDIO/MENU momentarily to select between Bass,
Treble, Balance, Fader, EQ, Subwoofer* and Source Volume
Level.
BASS
TREBLE
BALANCE
FADER
EQ
SUBWOOFER*
SOURCE LEVEL
Bass Press AUDIO/MENU until BASS appears, then rotate
the volumeꢀknob left/right to adjust (-6 minimum / +6
maximum).
Treble Press AUDIO/MENU until TREBLE appears, then rotate
the volumeꢀknob left/right to adjust (-6 minimum / +6
maximum).
Note: Bass and Treble settings are saved as the USER EQ
setting.
Note:ꢀBass and Treble settings are retained for each mode
individually.
Balance Press AUDIO/MENU until BALANCE appears, then rotate
the volumeꢀknob left/right to adjust (BALANCE LEFT 12 to
BALANCE RIGHT 12). "BALANCE EVEN" represents equal
balance.
Fader Press AUDIO/MENU until FADER appears, then rotate the
volumeꢀknob left/right to adjust (FADER FRONT 12 to FADER
REAR 12). "FADER EVEN" represents equal fader.
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
EQ Press AUDIO/MENU until EQ appears. Rotate the volumeꢀ
knob left/right to select between FLAT (default), POP, JAZZ,
CLASSIC, BEAT, ROCK and USER equalization curves. Press
SELECT to confirm. Any manual adjustment to the Bass or
Treble settings are automatically saved as USER.
Subwoofer Press AUDIO/MENU until SUBWFR appears, then press
SELECTꢀto confirm. Rotate the volumeꢀknob left/right to
adjust (0-12). Adjusting levels to 0 turns the subwoofer off.
SourceꢀVolumeꢀLevel The source volume level control allows a gain adjustment
for each audio source: AM, FM, CD, AUX, USB, operation of
iPod and Bluetooth. Set the source volume level for each
mode, depending on the relative volume of each audio
source.
To set the source volume level, press AUDIO/MENU until
SRC LEVEL appears. After one second, the current mode
will appear on the display. Turn the volumeꢀknob to adjust
the audio level of the current source (-6 minimum/+6
maximum).
Note:ꢀOnly the current mode will be available for
adjustment. To adjust another mode of operation, press
MODE until the desired mode is selected, then set the
source volume level for that mode.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6630ꢀOPERATION
AM/FMꢀTunerꢀOperation
Display
Press DISP to toggle the display between the following
options:
(LINE 1)
(LINE 2)
FREQUENCY
BAND/PRESET
FREQUENCY
CLOCK
SeekꢀTuning
Press TUNE
seek to the next strong station.
or TUNEꢀ
for more than one second to
momentarily to change
nn
ll
ManualꢀTuning
Press TUNE
or TUNEꢀ
nn
ll
radio frequency up or down one step at a time. Press and
hold to advance quickly.
ScanꢀTuning
Bandꢀ
Press SCAN to preview strong stations on the current band,
pausing for five seconds at each. Press SCAN again to
cancel.
Press BAND to select between FM1, FM2, FM3, AM1 and
AM2 bands.
StoringꢀandꢀRecallingꢀ
StationꢀPresets
Up to 18 FM stations and 12 AM stations can be stored. To
store a station, select the desired band and station. Press
and hold the desired preset button (1-6) for more than
two seconds. When stored, the preset number will appear in
the display. The station can be recalled anytime by pressing
the corresponding preset button.
PresetꢀScan
Press PS for more than two seconds to scan presets 1-6 on
the current band, pausing for five seconds at each. Press
PS again to cancel.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6630ꢀOPERATIONꢀ
CDꢀPlayerꢀOperation
InsertꢀCD
With the label facing up, insert a standard size CD into the
CD slot. The CD will automatically begin playback.
EjectꢀCD
Press EJECT to eject the CD. The unit will change to
previous mode of operation. If the disc is not removed
within 10 seconds, the unit will reload the disc. The unit
does not have to be turned on to eject CD.
TrackꢀSelect
Press TRACKꢀ
to skip to the beginning of the next
ll
track. Press TRACK
to return to the beginning of the
nn
current track. Pressing TRACK
beginning of the previous track.
again skips to the
nn
FastꢀForwardꢀandꢀ
Reverse
Press and hold TRACKꢀ
or reverse a track.
or TRACK
to fast forward
ll
nn
Pause
Press
Press
/
/
II to temporarily stop CD playback.
II again to resume playback.
l
l
Repeat
Press RPTꢀto enter the Repeat menu, then turn the volume
knob to select one of the following options:
• OFF - Plays all tracks on CD.
• TRACK - Continuously repeats selected track.
Random
Press RDMꢀto enter the Random menu, then turn the
volume knob to select one of the following options:
• OFF - Cancels the RDMꢀfunction.
• ALL- Plays all tracks in random order.
Note: Random mode is retained in memory when selecting
between other modes and when the unit is turned on/off.
Intro
Press INTꢀto enter the Intro menu, then turn the volume
knob to select one of the following options:
• OFF - Cancels the INTꢀfunction.
• ALL - Plays the first 10 seconds of each track.
CD-R/CD-RWꢀ
Compatibility
Some CD-Rs and CD-RWs may be incompatible with this
unit, depending on media type and recording method.
In addition, the following CDs may be incompatible with
this unit: CDs exposed to extreme temperatures or direct
sunlight for extended periods of time, CDs recorded in
which a recording session failed or a re-recording was
attempted and encrypted or copy-protected CDs that do not
conform to the audio CD-DA red book recording standard.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6630ꢀOPERATION
CDꢀPlayerꢀOperationꢀ-ꢀMP3/WMAꢀFiles
PlayingꢀanꢀMP3/WMAꢀDisc When an MP3/WMA encoded disc is first inserted, “MP3
CD READING” will appear in the display once the disc is
detected as a valid data disc. Depending on the number of
files and folders, this may take several seconds.
DisplayingꢀInformation Press DISP to toggle the display between the following
options:
(LINE 1)
(LINE 2)
ARTIST
SONG TITLE
FILE NAME
FOLDER NAME
ELAPSED TIME
CLOCK
TRACK NUMBER
TOTAL TRACKS
ꢀꢀ
“NO ID3 TAG” will be displayed if the MP3 file contains no
ID3 tag information.
“UNKNOWN” will be displayed if the WMA file contains no
WMA tag information.
“ROOT” will be displayed if the directory name of a root
folder is not labeled.
ꢀTitleꢀIconꢀ
ArtistꢀIconꢀ
FolderꢀIconꢀ
FileꢀIconꢀ
This icon will illuminate when the song title is displayed.
This icon will illuminate when the artist name is displayed.
This icon will illuminate when the folder name is displayed.
This icon will illuminate when the file name is displayed.
ꢀ
ꢀ
CharacterꢀSupport Maximum character display information
• File name – 32 character maximum
• Folder name – 32 character maximum
• *Song title – 30 character maximum
• *Artist name – 30 character maximum
*Song title and Artist Name will only be displayed if included
with the MP3/WMA file.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6630ꢀOPERATIONꢀ
CDꢀPlayerꢀOperationꢀ-ꢀMP3/WMAꢀFiles
Folder/FileꢀSearchꢀMode MP3/WMA CD mode features a file and folder search mode.
This search allows navigating through folders to find a
specific MP3 or WMA file for playback.
Stepꢀ1 PressꢀSELECT. "MP3 CD SEARCH" will appear, then a list of
the files in the currently selected directory will be accessible.
Stepꢀ2 Turnꢀtheꢀvolumeꢀknob. The list of subfolders and files in the
current folder will cycle. Turning the volume knob left will
cycle to the beginning of the folder/file list. Any subfolders
will be listed at the beginning of the list, followed by any files.
will illuminate when a folder is highlighted.
will illuminate when a file is highlighted.
Stepꢀ3 Navigateꢀtoꢀtheꢀdesiredꢀfolderꢀandꢀfile.
• To go up one folder level, press ESC once.
• To view the contents of a highlighted folder, press SELECT.
Note: the "FOLDERUP" option may also be selected to
navigate up one folder level.
Stepꢀ4 PressꢀSELECT to begin playing the selected MP3/WMA file.
Note: Press ESC from the root directory to exit search mode.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6630ꢀOPERATION
CDꢀPlayerꢀOperationꢀ-ꢀMP3/WMAꢀFiles
FolderꢀAccessꢀ Press
to select the previous folder.
to select the next folder.
Press
Note:ꢀFolder access is only available on MP3/WMA discs
recorded with more than one folder.
Repeat Press RPTꢀto enter the Repeat menu, then turn the volumeꢀ
knob to select one of the following options:
• OFF - Plays all tracks on CD.
• TRACK - Continuously repeats selected track.
• FOLDER - Continuously repeats all files in selected folder.
Random Press RDMꢀto enter the Random menu, then turn the volumeꢀ
knob to select one of the following options:
• OFF - Cancels the RDMꢀfunction.
• ALL- Plays all tracks in random order.
• FOLDER - Plays all tracks in folder in random order.
Note: Random mode is retained in memory when selecting
between modes and when the unit is turned on/off.
Intro Press INTꢀto enter the Intro menu, then turn the volumeꢀ
knob to select one of the following options:
• OFF - Cancels the INTꢀfunction.
• ALL - Plays first 10 seconds of each track.
• FOLDER - Plays first 10 seconds of each track in folder.
Note: Folder repeat, random and intro options only function
on MP3/WMA discs recorded with more than one folder.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6630ꢀOPERATIONꢀ
CDꢀPlayerꢀOperationꢀ-ꢀMP3/WMAꢀFiles
MediaꢀCompatibility The following types of discs/files are compatible:
• CD-ROM (ISO), CD-R, CD-RW
• CD-DA
• MP3 data
• WMA data
The following types of discs/files are not compatible:
• WMA files that are protected by DRM (Digital Rights
Management).
• WMA lossless format
• Discs recorded with Track At Once or packet writing
• MP3 PRO format
• MP3 playlists
• WAV format
PlaybackꢀOrder MP3/WMA playback sequence is based on recorded order
of files and begins in the root folder of the disc. Any empty
folders or folders that do not include MP3/WMA files are
skipped. This unit may not play files in the order they were
recorded in. Refer to your recording software’s user’s manual
for more information.
CompatibleꢀRecordingꢀ • ISO9660 level 1
Formats • ISO9660 level 2
• Yellow Book MODE 1
• Yellow Book MODE 2 FORM 1
• Multi session
• Maximum folders and files - 256
• Maximum folder levels - 8
• MPEG-1/2/2.5 Audio Layer-3
ISO9660 standards:
• Maximum nested folder depth is 8 (including the root
folder).
• Valid characters for folder/file names are letters A-Z
(all caps), numbers 0-9, and “_” (underscore). Some
characters may not be displayed correctly, depending on
the character type.
• This device can play back discs in Joliet, Romeo, and other
standards that conform to ISO9660. MP3/WMA written in the
formats other than the above may not play and/or their file
names or folder names may not be displayed properly.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6630ꢀOPERATION
CDꢀPlayerꢀOperationꢀ-ꢀMP3/WMAꢀFiles
AdditionalꢀMP3/WMAꢀ An internal buffer provides ESP (Electronic Skip Protection) to
Information virtually eliminate skipping.
When playing a disc recorded with regular audio files
(CD-DA or .WAV) and MP3/WMA files, the unit will play the
MP3/WMA files only.
Only MP3 files with filename extension (.mp3) can be played.
Only WMA files with filename extension (.wma) can be played.
Do not attempt to play discs which contain non-MP3/WMA
files with the MP3/WMA extension.
SamplingꢀFrequencyꢀRates
MP3 8kHz ~ 48kHz
WMA 32kHz ~ 48kHz
TransferꢀBitꢀrates
MP3 32kbps ~ 320kbps constant
Variable bit rates
WMA 32kbps ~ 192kbps constant
Variable bit rates
Note:
Some files may not play or be displayed correctly,
depending on sampling rates and bit rates.
MP3ꢀTagꢀDisplay ID3 tags Version 1.0 to 2.0
RecommendedꢀSettings For best results, use the following settings when burning an
MP3 disc:
128kbps or higher constant bit rate
44.1kHz or higher sampling frequency
For best results, use the following settings when burning a
WMA disc:
64kbps or higher constant bit rate
32kHz or higher sampling frequency
15
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6630ꢀOPERATION
USBꢀOperationꢀ-ꢀMP3/WMAꢀFiles
ConnectingꢀaꢀUSBꢀDevice Play MP3/WMA files from most mass storage devices by
(soldꢀseparately) connecting them to the XDMA6630's USB port.
PlayingꢀMusic When a USB device is first connected, “USB READING” will
appear in the display and playback will begin momentarily.
Depending on the number of files and folders, it may take
several seconds for the device to begin playing. If no valid
MP3/WMA files are detected, “NO FILE” will be displayed
and the last mode will be resumed.
TrackꢀSelect Press TRACKꢀ
to skip to the beginning of the next
ll
track. Press TRACK
to return to the beginning of the
nn
current track. Pressing TRACK
beginning of the previous track.
again skips to the
nn
FastꢀForwardꢀandꢀReverse Press and hold TRACKꢀ
or TRACK
to fast
ll
nn
forward or reverse a track.
Pause Press
/
/
II to temporarily stop USB playback.
II again to resume playback.
l
l
Press
FileꢀSearch Press SELECT to enter the USB file/folder search mode.
Stepꢀ1 "USB SEARCH" will be displayed. A list of all the folders
from the USB device will be displayed.
Note: If there are no folders on the USB device, "ROOT" will
be displayed. Press SELECT to view the files on the root
folder.
Stepꢀ2 Turn the volumeꢀknob to cycle through all the folders on the
device and press SELECT to choose the desired folder. The
list of files in the selected folder will be displayed. Turn the
volumeꢀknob to cycle through the list of files.
Stepꢀ3
Once the desired song is displayed, press SELECT to begin
playback of the desired song.
Pressing ESC when viewing the contents of a folder will
return to the list of folders on the USB device. Press ESC
again to exit the search menu.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6630ꢀOPERATION
USBꢀOperationꢀ-ꢀMP3/WMAꢀFiles
DisplayingꢀInformation
Press DISP to toggle the display between the following
options:
(LINE 1)
(LINE 2)
ARTIST
SONG TITLE
FILE NAME
FOLDER NAME
ELAPSED TIME
CLOCK
TRACK NUMBER
TOTAL TRACKS
ꢀꢀ
"NO TITLE" will be displayed if no song title information is
available.
"NO ARTIST" will be displayed if no artist information is
available.
ꢀTitleꢀIconꢀ
ArtistꢀIconꢀ
FolderꢀIconꢀ
FileꢀIconꢀ
This icon will illuminate when the song title is displayed.
This icon will illuminate when the artist name is displayed.
This icon will illuminate when the folder name is displayed.
This icon will illuminate when the file name is displayed.
ꢀ
ꢀ
FolderꢀAccessꢀ Press
to select the previous folder.
to select the next folder.
Press
Note: Folder access is only available on USB devices with
more than one folder.
Repeat
Press RPTꢀto enter the Repeat menu, then turn the volume
knob to select one of the following options:
• OFF- Plays all tracks on USB device.
• TRACK - Continuously repeats selected track.
• FOLDER - Continuously repeats all files in selected folder.
Random
ꢀ
Press RDMꢀto enter the Random menu, then turn the volume
knob to select one of the following options:
• OFF - Cancels the RDMꢀfunction.
• ALL- Plays all tracks in random order.
• FOLDER - Plays all tracks in folder in random order.
Note: Random mode is retained in memory when selecting
between modes and when the unit is turned on/off.
Intro
Press INTꢀto enter the Intro menu, then turn the volume
knob to select one of the following options:
• OFF - Cancels the INTꢀfunction.
• ALL - Plays first 10 seconds of each track.
• FOLDER - Plays first 10 seconds of each track in folder.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6630ꢀOPERATION
USBꢀOperationꢀ-ꢀMP3/WMAꢀFiles
CharacterꢀSupport Maximum character display information
• Track name – 32 character maximum
• Directory name – 32 character maximum
• *Song title – 30 character maximum
• *Artist name – 30 character maximum
*Song title and artist name will only be displayed if included
with the MP3/WMA file.
MediaꢀCompatibility The following types of files are compatible:
• MP3 data
• WMA data
The following types of files are not compatible:
• WMA files that are protected by DRM (Digital Rights
Management).
• WMA lossless format
• MP3 PRO format
• MP3 playlists
• WAV format
PlaybackꢀOrder MP3/WMA playback sequence is based on order the files are
copied to the USB device and begins in the root folder. Any
empty folders or folders that do not include MP3/WMA files
are skipped. Depending on your software, the playback order
may vary.
PlaybackꢀCapacity • Maximum number of files: 48896
• Maximum number of folders: 127 plus the root directory
• Maximum number of files in each folder and root: 382
• Maximum number of folder levels (sub folders): 8
(7 levels plus the root)
Note: If the number of files/folders exceeds the maximum
outlined above, the additional files/folders will be ignored.
USBꢀDeviceꢀCompatibility Some devices that exceed the maximum number of files or
folders may not function properly.
Due to the differences of USB devices, some devices may not
be compatible. USB devices must be ‘mass storage class’
and formatted to the FAT or FAT32 file system in order to
ensure compatibility.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6630ꢀOPERATION
USBꢀOperationꢀ-ꢀMP3/WMAꢀFiles
AdditionalꢀMP3/WMAꢀ Only MP3 files with filename extension (.mp3) can be played.
Information Only WMA files with filename extension (.wma) can be
played. Do not attempt to play non-MP3/WMA files with the
MP3/WMA extension.
SamplingꢀFrequencyꢀRates
MP3 8kHz ~ 48kHz
WMA 32kHz ~ 48kHz
TransferꢀBitꢀrates
MP3 32kbps ~ 320kbps constant
Variable bit rates
WMA 32kbps ~ 192kbps constant
Variable bit rates
Note: Some files may not play or be displayed correctly,
depending on sampling rates and bit rates.
MP3ꢀTagꢀDisplay ID3 tags Version 1.0 to 2.0
Note: If an invalid ID3 tag version is detected, "NO
SUPPORT" will scroll on the display.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6630ꢀOPERATION
OperationꢀofꢀiPod
ConnectꢀanꢀiPodꢀDevice
(NotꢀIncluded)
The XDMA6630 features a direct USB control system for
iPod. To play music from an iPod device, connect the USB
cable (included with your iPod device) to the XDMA6630
USB port. Once connected, "iPod READING" will appear in
the display. Playback will begin automatically. If a song
is playing on the iPod device before it is connected, it will
continue to play.
DisplayingꢀInformation
Press DISP to select the display options as follows:
(LINE 1)
(LINE 2)
ARTIST
SONG TITLE
ARTIST
ALBUM
ELAPSED TIME
CLOCK
TRACK NUMBER
TOTAL TRACKS
SearchꢀMode
SearchꢀMenuꢀFunctions
(stepꢀ1)
Press SELECT once to enter the search mode.
(stepꢀ2)
Turn the volumeꢀknob to select between playlist, artist,
album, song,ꢀaudiobook and podcast. Press SELECT to select
the desired search type.
(stepꢀ3)
Navigate to the desired song and press SELECT to begin
playback of that song. Use the table below for reference
when navigating through the menu options.
Note: Press ESC to access the previous level (up one level).
Pressing ESCꢀfrom the search menu will exit the search.
See the below table for a list of the search menu navigation options.
Menu Navigation
Songs
Search Item
Menu
Playlists
Playlist
Artist
Menu
Menu
Menu
Menu
Menu
Artists
Albums
Songs
Songs
Album
Song
Audiobook
Podcast
Albums
Songs
Audiobooks
Podcasts
20
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6630ꢀOPERATION
OperationꢀofꢀiPod
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀSongꢀSelect
Press
Press
to skip to the beginning of the next song.
to return to the beginning of the current song.
again skips to the beginning of the previous
ll
nn
Pressing
song.
nn
ꢀꢀFastꢀForwardꢀandꢀ
Press and hold
song.
or
to fast forward or reverse a
ll nn
Reverse
ꢀꢀ
Pause
Press / II again to resume playback.
Press / II to temporarily stop playback.
l
l
Repeat
Press RPTꢀto enter the Repeat menu, then turn the volume
knob to select one of the following options:
• OFF - Repeats all tracks.
• SONG - Repeats selected track.
Random
Press RDMꢀto enter the Random menu, then turn the
volume knob to select one of the following options:
• OFF - Cancels the RDMꢀfunction.
• ALL- Plays all tracks in random order.
• ALBUM - Plays all tracks in the selected album in
random order.
Intro
Press INTꢀto enter the Intro menu, then turn the volume
knob to select one of the following options:
• OFF - Cancels the INTꢀfunction.
• ON - Plays first 10 seconds of each track.
CharacterꢀSupport
Only alphanumeric characters can be displayed (ASCII
type).
"NO SUPPORT" will be displayed if the file contains
characters that can not be displayed.
"NO FILE" will be displayed if there are no songs in the
selected playlist.
Maximum character display information
• *Song title – 32 character maximum
• *Artist name – 32 character maximum
• *Album name – 32 character maximum
*Song Title, Artist Name and Album name will only be
displayed if included with the file.
iPodꢀDeviceꢀCompatibility
Works with
• iPhone 3GS
• iPhone 3G
• iPhone
Made for
• iPod nano (5th generation)
• iPod touch (2nd generation)
• iPod nano (4th generation)
• iPod classic
• iPod touch (1st generation)
• iPod nano (3rd generation)
• iPod nano (2nd generation)
• iPod with video
21
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6630ꢀOPERATION
Bluetooth®ꢀOperation
Overview
The XDMA6630 supports the HFP (hands-free profile), A2DP (advanced audio distribution
profile) and AVRCP (audio video remote control profile).
Preparation
Before you can use a mobile device with this head unit, it must be paired and connected.
Please make sure that Bluetooth is activated on your mobile device before you begin the
pairing process. Refer to the owner's manual of your mobile device for more details.
BluetoothꢀPairing
1) To pair a Bluetooth enabled mobile phone to your head unit, change to Bluetooth mode
by pressing on the head unit or press MODE until "BLUE-TOOTH" is displayed.
2) Press and hold on the head unit for 5 seconds, until "PAIRING" is displayed, the
Bluetooth icon will flash every second. The head unit will begin to broadcast the pairing
signal for 90 seconds.
3) Complete the pairing from the Bluetooth menu of your mobile device by searching
for new devices. Please refer to your mobile device instructions for further information
on Bluetooth pairing and connections. The Bluetooth icon will illuminate solid when
connected.
TheꢀBTM60ꢀdeviceꢀnameꢀisꢀ"DUAL_BT"ꢀꢀ
TheꢀBluetoothꢀpasscodeꢀ"1234"ꢀꢀ
ꢀ
Connectingꢀaꢀmobileꢀdevice
• If the AUTO-CON menu setting is set to OFF, you must press to connect you device
after pairing.
• From Bluetooth standby mode, press and hold
ꢀto disconnect your mobile device.
• If your mobile device becomes disconnected, press from Bluetooth standby mode to
reconnect your mobile device.
• To connect a previously paired mobile device:
1) Disconnect any mobile devices by pressing and holding
for 5 seconds.
2) Press SELECT. "DEVICE NAME" will appear on the LCD.
2) Turn the volume knob to cycle through the list of devices 1 through 8.
3) Press to connect to the desired device. It must be in range to connect.
Note: When a device number is selected, i will take a few moments for the device name to
appear on the bottom line of the LCD.
Compatibility
• Due to the differences in Bluetooth technology, some mobile devices may be
incompatible or function improperly when used with the XDMA6630.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6630ꢀOPERATION
Bluetooth®ꢀOperation
Description
Function
Press once. "Enter Number" will be shown, then an "_" will
appear on the display.
Input the desired phone number using the 0-9, *, # buttons on the
remote control. Press to begin dialing.
MakingꢀaꢀPhoneꢀCall
A phone call may also be placed from your mobile device using
the keypad, phone book or speed dial. When a call is placed from
a mobile device, “DIALING” will appear on the head unit display.
If an incoming call is detected, the head unit will automatically
switch to Bluetooth mode.
The incoming phone number will scroll across the display, the
phone icon will flash on the display, and a ring tone will be
audible from the vehicle speakers. See Bluetooth Settings for
speaker configurations.
Note: The ring audio level will depend the mobile device and head
unit ring volume and audio settings. If the ringer on the mobile
device is off, you may not hear an incoming ring tone.
ReceivingꢀaꢀPhoneꢀ
Call
Press on the head unit to receive a call. The phone icon in the
display will illuminate solid.
The head unit will display the elapsed time of the phone call.
The volume knob will adjust the volume of the call.
Press MUTE to mute the microphone during a call.
DuringꢀaꢀPhoneꢀCall
RefusingꢀaꢀCall
To refuse an incoming phone call, press and hold
seconds.
for 3
Press
to end a call.
EndingꢀaꢀPhoneꢀCall
Redial
If the phone call was received, the head unit will return to
previous mode when call is ended.
Press twice consecutively to redial the last number.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6630ꢀOPERATION
Bluetooth®ꢀOperation
Description
Function
While a mobile device is connected, press SELECT. The head unit
will display "RECENT CALLS." This will list the previous 10 calls that
were received by or placed from the XDMA6630.
Recentꢀcallꢀmenu
Rotate the volume knob to cycle through the list of phone numbers
Press to begin dialing the selected number while it is displayed.
“DIALING” will appear on the head unit display.
To transfer the phone call between the head unit and the mobile
AudioꢀTransfer device, press and hold DISP for 3 seconds during a call. Tip: transfer
audio to your mobile device before turning the head unit off.
When there is a second call incoming, press to activate call
waiting. The current call will be placed on hold, and the second call
will be active. Press again to return to the first call.
CallꢀWaiting
CallꢀHold
During a phone call, press to place the current call on hold. To
resume the phone call, press again.
BluetoothꢀSetupꢀMenu
Options
Action
Menu Function
Enables the Bluetooth feature. The Bluetooth icon
will flash every 10 seconds when not paired to a
mobile device.
BL'TOOTHꢀON
BluetoothꢀModeꢀ
BL'TOOTH OFF Disables Bluetooth support.
Allows the XDMA6630 to automatically (re)connect
AUTOꢀCONꢀON to the most recently connected mobile device. Note:
Some mobile devices do not support this feature.
AutoꢀConnect
Disables the auto connect feature. You must always
AUTO CON OFF
press
to connect a mobile device.
Disables the auto answer feature. Press to
receive an incoming call.
AUTOꢀANSꢀOFF
AutoꢀAnswer
All incoming calls will be answered automatically
after 2-3 rings without notification.
AUTO ANS ON
BTꢀSPKRSꢀFRONT Directs the Bluetooth audio to the front speakers.
BT SPKRS ALL Directs the Bluetooth audio to all 4 speakers.
BluetoothꢀAudio
*See page 7 for Setup Menu navigation
24
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6630ꢀOPERATION
Bluetooth®ꢀOperation
BluetoothꢀStreamingꢀAudioꢀOperation
(BluetoothꢀAudioꢀMode)
The XDMA6630 supports A2DP (advanced audio distribution profile) wireless streaming
audio from your Bluetooth mobile device directly to your head unit. You can also control
your music from the front panel of the head unit using AVRCP (audio video remote control
profile).
Notes:
• To stream music to your head unit, your mobile device must support the A2DP and
AVRCP Bluetooth profiles. Check the owner's manual of your mobile device for details.
• Streaming audio must be enabled from your mobile device. This option will vary
depending on the device. Some devices allow streaming audio to be disabled.
After pairing, connecting and enabling streaming audio from a compatible mobile device,
begin playing music using the music player on your mobile device. Once the music is
playing, the following functions can be used to control the music:
• The
• The
• The
• The
button will skip to the next available audio track.
button will skip to the previous audio track.
II button will toggle between play and pause during playback.
ll
nn
/
l
button will stop the audio playback.
Note: Some Bluetooth devices may not fully support these commands.
BluetoothꢀReset
Resetting the Bluetooth module will remove the list of paired phones and delete the list of
recent calls from memory.
To reset the XDMA6630's Bluetooth feature, perform the following steps:
1) Press MODE until the head unit is in Bluetooth mode.
2) Press and hold MODE for 3 seconds to reset the Bluetooth settings back to the factory
default.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6630ꢀOPERATION
LimitedꢀOneꢀYearꢀWarranty
This warranty gives you specific legal rights.
You may also have other rights which vary
from state to state.
Whatꢀtoꢀdo?
1. Before you call for service, check the
troubleshooting guide in your owner’s
manual. A slight adjustment of any custom
controls may save you a service call.
Dual Electronics Corp. warrants this product to
the original purchaser to be free from defects in
material and workmanship for a period of one
year from the date of the original purchase.
2. If you require service during the warranty
period, you must carefully pack the product
(preferably in the original package) and ship
it by prepaid transportation with a copy of the
original receipt from the retailer to an
authorized service center.
Dual Electronics Corp. agrees, at our option,
during the warranty period, to repair any defect
in material or workmanship or to furnish an
equal new, renewed or comparable product
(whichever is deemed necessary) in exchange
without charges, subject to verification of the
defect or malfunction and proof of the date of
purchase. Subsequent replacement products
are warranted for the balance of the original
warranty period.
3. Please describe your problem in writing and
include your name, a return UPS shipping
address (P.O. Box not acceptable), and a
daytime phone number with your shipment.
4. For more information and for the location of
the nearest authorized service center please
contact us by one of the following methods:
Whoꢀisꢀcovered? This warranty is extended
to the original retail purchaser for products
purchased from an authorized Dual dealer and
used in the U.S.A.
• Call us toll-free at 1-866-382-5476
• E-mail us at [email protected]
Whatꢀisꢀcovered? This warranty covers all
defects in material and workmanship in
this product. The following are not covered:
software, installation/removal costs, damage
resulting from accident, misuse, abuse, neglect,
product modification, improper installation,
incorrect line voltage, unauthorized repair or
failure to follow instructions supplied with the
product, or damage occurring during return
shipment of the product. Specific license
conditions and copyright notices for the
Exclusion of Certain Damages: This warranty
is exclusive and in lieu of any and all other
warranties, expressed or implied, including
without limitation the implied warranties of
merchantability and fitness for a particular
purpose and any obligation, liability, right,
claim or remedy in contract or tort, whether
or not arising from the company’s negligence,
actual or imputed. No person or representative
is authorized to assume for the company any
other liability in connection with the sale of
this product. In no event shall the company be
liable for indirect, incidental or consequential
damages.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6630ꢀOPERATION
Troubleshootingꢀ-ꢀGeneral
Problem
Cause
Action
Yellow wire not connected or incorrect
voltage Red wire not connected or
incorrect voltage
Check connections for proper
voltage (11~16VDC)
Unitꢀwillꢀnotꢀturnꢀonꢀ
(noꢀpower)
Black wire not connected
Fuse blown
Check connection to ground
Replace fuse
Speaker wires not connected
Check connections at speakers
Unitꢀhasꢀpowerꢀ
(butꢀnoꢀsound)
Insulate all bare speaker wires
from each other and chassis
ground
One or more speaker wires touching
each other or touching chassis ground
Yellow or red wire touching chassis
ground
Check for pinched wire
Unitꢀblowsꢀfuses
Speaker wires touching chassis ground
Incorrect fuse rating
Check for pinched wire
Use fuse with correct rating
Unit is not mounted correctly or
backstrap is not secure
Check mounting sleeve and
backstrap support
Excessiveꢀskipping
Physical defect in media (CD, CD-R or
CD-RW)
Check media for scratches
Press EJECT or RESET
Press EJECT or RESET
ERROR-01ꢀappearsꢀ
onꢀdisplay
Disc read error
ERROR-02ꢀappearsꢀ
onꢀdisplay
Focus error or disc is in upside down
PROTECTꢀappearsꢀ
onꢀdisplay
The WMA file is copy-protected by DRM Write disc using WMA files that
(Digital Rights Management)
are not copy-protected
NOꢀFILEꢀappearsꢀ
onꢀdisplay
Selected file is not available in direct or
alphanumeric search modes
Repeat search using valid
parameters
Write disc using valid audio
files with .mp3 or .wma file
extensions
INVALIDꢀappearsꢀ
onꢀdisplay
The file format is incompatible
Press and hold EJECT
for 3 seconds to reset CD
mechanism position
CD mechanism position out of
alignment
Unitꢀwillꢀnotꢀacceptꢀ
aꢀdisc
Remove 2 transit screws
located on top of the unit
CD transit screws still in place
NOꢀSUPPORTꢀappearsꢀ
onꢀdisplay
Version 1.0 to 2.0 ID3 tags are
supported.
An invalid ID3 tag version is present
27
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6630ꢀOPERATION
Specifications
CDꢀPlayer Frequency response: 10Hz-20kHz
Channel separation @ 1kHz: >65dB
D/A converter: 1ꢀBit
FMꢀTuner Tuning range: 87.5MHz-107.9MHz
Usable sensitivity: 8.5dBf
50dB quieting sensitivity: 10dBf
Stereo separation @ 1kHz: 40dB
Frequency response: 30Hz-13kHz
AMꢀTuner Tuning range: 530kHz-1710kHz
Usable sensitivity: 22uV
Frequency response: 30Hz-2.2kHz
General Speaker output impedance: 4~8ꢀohms
Line output voltage: 2ꢀVoltsꢀRMS
Dimensions: 7"ꢀxꢀ7"ꢀxꢀ2"ꢀ(178ꢀxꢀ178ꢀxꢀ51ꢀmm)
Design and specifications subject to change without notice.
CEA-2006 Power Standard Specifications
(reference: 14.4VDC +/- 0.2V, 20Hz~20kHz)
Power Output: 18 Watts RMS x 4 channels at 4 ohms and < 1% THD+N
Signal to Noise Ratio: 80dBA (reference: 1 watt into 4 ohms)
28
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6630ꢀOPERATION
FCCꢀCompliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6630ꢀOPERATION
Notes
30
Download from Www.Somanuals.com. All Manuals Search And Download.
XDMA6630ꢀOPERATION
Notes
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Electronics Corp.
Toll Free: 1-866-382-5476
©2010 Dual Electronics Corp. All rights reserved.
Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the
United States and or other countries.
iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
iPhone is a trademark of Apple Inc., registered in the U.S. and other countries.
“Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the
developer to meet Apple performance standards.
“Works with iPhone” means that an electronic accessory has been designed to connect specifically to iPhone and has been certified
by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Namsung is under license.
Other trademarks and trade names are those of their respective owners.
NSA0310-V01
Download from Www.Somanuals.com. All Manuals Search And Download.
|