DIXON INDUSTRIES, INC. A
BLOUNT COMPANY AIRPORT
INDUSTRIAL PARK
PO BOX 1569
COFFEYVILLE KS 673370945
316251 2000
TECHNICAL DATA
ZTR Model 3302
IMPORTANT - READ OPERATOR'S MANUAL BEFORE OPERATING OR MAKING ADJUSTMENTS
SEAT ADJUSTMENT
1. Pull or lift body retention latch P/N 3954
from transaxle backing plate, raise and
push body and seat assembly forward.
2. Loosen four seat bolts, P/N 3227 and
slide seat forward or backward to
desired position.
3. Re -tighten seat adjustment bolts P/N
3227. DO NOT operate mower without
seat adjustment bolts properly
tightened.
4. Close upper body and push retention
latch P/N 3954 over transaxle backing
plate.
Page 1 of 8
Download from Www.Somanuals.com. All Manuals Search And Download.
MOWER BLADE OPERATION
To engage mower blades, turn engagement lever on floor slowly to the "ON" position. To
Disengage mower blades, turn lever slowly to the "OFF" position.
SAFETY CHECKS
IMPORTANT- PERFORM SAFETY CHECKS AFTER MAKING ANY REPAIRS OR ADJUSTMENTS
1.
2.
After reassembly, while seated on mower, attempt to start engine with mower deck
engaged. Engine should not start. If engine does start, return the mower to an Authorized
Dixon dealer for adjustment or repair.
Disengage mower deck and start engine. With the operator in the normal seated position,
engage mower deck and remove weight from seat. The engine should stop. If the engine
does not stop when operator rises from seat, return the mower to an Authorized Dixon
dealer for adjustment or repair.
3.
Engage, then disengage mower blade in each cutting height. Insure that blade
disengages and comes to a stop within (5) seconds in each height position. If blade does
not disengage properly, contact your Authorized Dixon dealer.
CAUTION: DO NOT OPERATE MOWER IF ANY SAFETY FEATURE IS NOT FUNCTIONING CORRECTLY
PARKING BRAKE ADJUSTMENT
Remove the body as described above. Tighten nut on brake rod P/N 2533 located in front of
the transaxle on each side, just enough to prevent brake from slipping when engaged.
CAUTION: Over-tightening may cause premature wear on the brake band P/N 5085
Revised 7/93 P/N
8114
Page 3 of 8
Download from Www.Somanuals.com. All Manuals Search And Download.
3302 BODY ASSEMBLY
Download from Www.Somanuals.com. All Manuals Search And Download.
3302 CHASSIS ASSEMBLY
Download from Www.Somanuals.com. All Manuals Search And Download.
3302 TRANSAXLE ASSEMBLY
Download from Www.Somanuals.com. All Manuals Search And Download.
3302 MOWER DECK ASSEMBLY 30"
Download from Www.Somanuals.com. All Manuals Search And Download.
3302 WIRING ASSEMBLY
Download from Www.Somanuals.com. All Manuals Search And Download.
|