This product can be set up using any
current web browser, i.e., Internet
Explorer 5x, Netscape Navigator 4x.
DWL-900AP+
D-Link AirPlus™
Wireless Access Point
Before You Begin
It’s best to use a computer (with an Ethernet adapter) that is connected to a router for
configuring the DWL-900AP+. The default IP address for the DWL-900AP+ is
192.168.0.50 with a Subnet Mask of 255.255.255.0. You will need to assign your
computer a Static IP address within the same range as the DWL-900AP+’s IP address
for the purpose of configuration of the DWL-900AP+. See the Manual on the CD-ROM
if you need assistance in assigning a Static IP address for your network adapter.
Check Your Package Contents
These are the items included with your DWL-900AP+ purchase:
• DWL-900AP+ Wireless Access Point
• CD-ROM (containing Manual and Warranty)
• Ethernet (CAT5 UTP/Straight Through) Cable
Using a power
supply with a
different voltage rating
• 5V DC, 2A Power Adapter
will damage and void
the warranty for this
product.
If any of the above items are missing, please contact your reseller.
©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the
property of their respective holders. Software and specifications subject to change without
Download from Www.Somanuals.com. All Manuals Search And Download.
notice. DWL-900AP+.05292002
When you have completed
the steps in this Quick
Installation Guide, your
connected network should
look similar to this:
Using The Setup Wizard
Open your Web
browser and type
“http://192.168.0.50”
into the URL address
box. Then press the Enter
or Return key.
The logon pop-up
screen will appear.
Type “admin” for the
username and leave the
password field blank.
Click OK
Download from Www.Somanuals.com. All Manuals Search And Download.
Using The Setup Wizard (continued)
Once you have
logged in, the
Home screen
will appear.
Click Run Wizard
You will see the following
screens.
Click Next
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1 - Set up your new
password. You have the
option to establish a
password.
Click Next
Step 2 - Wireless Setup
The default wireless settings are:
SSID = default
Channel = 6
You can change these settings
to match an existing wireless
network.
Click Next
Step 3 - Encryption
The DWL-900AP+ is capable
of three levels of wireless
encryption - 64-bit, 128-bit,
and 256-bit. By default the
encryption is disabled. You
can change the encryption
settings for more secure
wireless communication.
Click Next
Download from Www.Somanuals.com. All Manuals Search And Download.
Your Setup is Complete!
Click Restart
Click
Close
You will be returned to the Home tab.
Download from Www.Somanuals.com. All Manuals Search And Download.
Click Exit
For additional settings or information, refer to the Advanced, Tools, or Status tabs on
the web-management interface; or to the manual located on the CD-ROM.
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Support
You can find the most recent software and user
documentation on the D-Link website.
D-Link provides free technical support for customers
within the United States for the duration of the
warranty period on this product.
U.S. customers can contact D-Link technical support
through our web site or by phone.
D-Link Technical Support over the Telephone:
(800) 758-5489
24 hours a day, seven days a week
D-Link Technical Support over the Internet:
email: [email protected]
Download from Www.Somanuals.com. All Manuals Search And Download.
|