Use & Care Manual
Top Mount
Welcome
2
3
Refrigerator
Safety Instructions
Installation -- Includes Connecting
Household Water Supply to Refrigerator
4 - 5
6 - 9
9
Door
Removal & Reversal
Features at a Glance
Temperature Controls
10
Looking Inside
Ice Service
11 - 12
13
Food Storage
& Energy Saving Tips
14
Normal Operating Sounds 15
Care & Cleaning
Warranty
16 - 17
18
BeforeYou Call
19
READ AND SAVE THESE INSTRUCTIONS
P/N 241824301 (June 2007)
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
PROPER DISPOSAL OFYOUR REFRIGERATOR OR
FREEZER
WARNING
Please Read All Instructions Before UsingThis
Refrigerator.
Risk of child entrapment
Child entrapment and
suffocation are not problems of
the past. Junked or abondoned
refrigerators or freezers are still
dangerous – even if they will sit
for “just a few days.” If you are
getting rid of your old refrigerator
or freezer, please follow the
instructions below to help
prevent accidents.
FORYOUR SAFETY
•
Do not store or use gasoline, or other flammable liquids
in the vicinity of this or any other appliance. Read product
labels for warnings regarding flammability and other
hazards.
•
•
•
Do not operate the refrigerator in the presense of
explosive fumes.
Avoid contact with any moving parts of automatic ice
maker.
Remove all staples from the carton. Staples can cause
severe cuts, and also destroy finishes if they come in
contact with other appliances or furniture.
Before you throw away your old refrigerator/ freezer:
•
•
Remove doors.
Leave shelves in place so children may not easily climb
inside.
CHILD SAFETY
•
Have refrigerant removed by a qualified service
technician.
Destroy or recycle the carton, plastic bags, and any exterior
wrapping material immediately after the refrigerator is
unpacked. Children should NEVER use these items to play.
Cartons covered with rugs, bedspreads, plastic sheets or
stretch wrap may become airtight chambers, and can quickly
cause suffocation.
IMPORTANT
Turning the Freezer and
Fresh Food Controls to “0”
turns off the compressor
and prevents your
refrigerator from cooling,
but does not disconnect the
power to the light bulb and
other electrical
WARNING
These Guidelines Must Be FollowedTo EnsureThat Safety
Mechanisms In This Refrigerator Will Operate Properly.
components. To turn off
power to your refrigerator
you must unplug the power
cord from the wall outlet.
ELECTRICAL INFORMATION
•
The refrigerator must be plugged into its own dedicated
115 Volt, 60 Hz., AC only electric outlet. The power cord
of the appliance is equipped with a three-prong grounding
plug for your protection against electrical shock hazards. It
must be plugged directly into a properly grounded three-
prong receptacle. The receptacle must be installed in
accordance with local codes and ordinances. Consult a
qualified electrician. Do not use an extension cord or
adapter plug.
•
•
If the power cord is damaged, it should be replaced by the
manufacturer, service technician or a qualified person to
prevent any risk.
Never unplug the refrigerator by pulling on the power
cord. Always grip the plug firmly, and pull straight out
from the receptacle to prevent damaging the power cord.
Unplug the refrigerator before cleaning and before
replacing a light bulb to avoid electrical shock.
Performance may be affected if the voltage varies by 10%
or more. Operating the refrigerator with insufficient power
can damage the compressor. Such damage is not covered
under your warranty.
•
•
•
•
Do not plug the unit into an outlet controlled by a wall
switch or pull cord to prevent the refrigerator from being
turned off accidentally.
Avoid connecting refrigerator to a Ground Fault Interruptor
(GFI) circuit.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
This Use & Care Manual provides specific operating
DOOR OPENING
instructions for your model. Use the refrigerator only as
instructed in this Use & Care Manual. Before starting the
refrigerator, follow these important first steps.
Your refrigerator should be positioned to allow easy access to
a counter when removing food. To make this possible, the
direction in which the doors open can be reversed. See Door
Removal & Reversal Instructions.
LOCATION
•
Choose a place that is near a grounded electrical outlet.
Do Not use an extension cord or an adapter plug.
If possible, place the refrigerator out of direct sunlight
and away from the range, dishwasher or other heat
sources.
NOTE
•
If your refrigerator is placed with the door hinge side against
a wall, you may have to allow additional space so the door
can be opened wider.
•
•
The refrigerator must be installed on a floor that is level
and strong enough to support a fully loaded refrigerator.
Consider water supply availability for models equipped
with an automatic ice maker.
LEVELING
All four corners of your refrigerator must rest firmly on a solid
floor. Your refrigerator is equipped with adjustable front rollers
or front leveling screws to help level your unit.
INSTALLATION
To LevelYour Refrigerator:
1. Remove toe grille.
CAUTION
Do Not install the refrigerator where the temperature will
drop below 55°F (13°C) or rise above 110°F (43°C).The
compressor will not be able to maintain proper
temperatures inside the refrigerator.
2. Use flat-blade screwdriver
or 3/8” socket wrench to
adjust front rollers. Use
adjustable wrench to
adjust leveling screws.
Do Not block the toe grille on the lower front of your
refrigerator. Sufficient air circulation is essential for the
proper operation of your refrigerator.
NOTE
Raise the front of the refrigerator enough so the doors close
freely when opened halfway. The refrigerator should slope ¼”
to ½” from front to back. Then level the refrigerator from side
to side.
IMPORTANT
If you install your refrigerator in a garage or other unheated
area, you may experience freezer temperature problems
during the winter months when temperatures dip below
55° F.
Upgrading your refrigerator with a Garage Kit will lower the
minimum operating temperature of your unit to 34° F. This kit
can be ordered through the Electrolux Solutions Hotline (see
back cover).
Installation Clearances
Raise
•
Allow the following clearances for ease of installation,
proper air circulation, and plumbing and electrical
connections:
Stationary Front Roller
with Leveling Screw
(some models)
Adjustable Front Roller
(some models)
Sides & Top
Back
3/8”
1”
NOTE
If you see black coils/tubing on the back of your refrigerator
(air-cooled condenser) leave 3” clearance at top of
refrigerator.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING HOUSEHOLD WATER SUPPLY TO REFRIGERATOR
To ConnectWater Supply LineTo Ice Maker InletValve
1. Disconnect refrigerator from electric power source.
WARNING
To avoid electric shock, which can cause death or severe
personal injury, disconnect the refrigerator from electrical
power before connecting a water supply line to the
refrigerator.
2. Place end of water supply line into sink or bucket. Turn ON
water supply and flush supply line until water is clear. Turn
OFF water supply at shutoff valve.
3. Unscrew plastic cap from water valve inlet and discard
cap.
4. Slide brass compression nut, then ferrule (sleeve) onto
water supply line, as shown.
5. Push water supply line into water valve inlet as far as it
will go (¼ inch). Slide ferrule (sleeve) into valve inlet and
finger tighten compression nut onto valve. Tighten another
half turn with a wrench; DO NOT over tighten.
6. With steel clamp and screw, secure water supply line to
rear panel of refrigerator as shown.
7. Coil excess water supply line (about 2½ turns) behind
refrigerator as shown and arrange coils so they do not
vibrate or wear against any other surface.
8. Turn ON water supply at shutoff valve and tighten any
connections that leak.
9. Reconnect refrigerator to electrical power source.
10. To turn ice maker on, lower wire signal arm (see ice
maker front cover for ON/OFF position of arm).
CAUTION
To Avoid Property Damage:
•
Copper tubing is recommended for the water supply
line.Water supply tubing made of ¼”plastic is not
recommended since it greatly increases the potential
for water leaks. Manufacturer will not be responsible
for any damage if plastic tubing is used for supply
line.
DO NOT install water supply tubing in areas where
temperatures fall below freezing.
Chemicals from a malfunctioning softener can
damage the ice maker. If the ice maker is connected
to soft water, ensure that the softener is maintained
and working properly.
•
•
IMPORTANT
Ensure that your water supply line connections comply with
all local plumbing codes.
Before InstallingTheWater Supply Line,YouWill Need
•
•
•
Basic Tools: adjustable wrench, flat-blade screwdriver,
and PhillipsTM screwdriver
Access to a household cold water line with water pressure
between 30 and 100 psi.
A water supply line made of ¼ inch (6.4 mm) OD, copper
tubing. To determine the length of copper tubing needed,
you will need to measure the distance from the ice maker
inlet valve at the back of the refrigerator to your cold water
pipe. Then add approximately 7 feet (2.1 meters), so the
refrigerator can be moved out for cleaning (as shown).
•
•
A shutoff valve to connect the water supply line to your
household water system. DO NOT use a self-piercing type
shutoff valve.
A compression nut and ferrule (sleeve) for connecting the
water supply line to the ice maker inlet valve.
NOTE
Water line kit number 5303917950, available from your
appliance dealer at additional cost, contains 25 feet (7.6
meters) of ¼ inch OD copper tubing, a saddle type shutoff
valve (nonpiercing), (2) ¼ inch brass compression nuts, (2)
ferrules/sleeves, and instructions for installing a water supply
line.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
DOOR REMOVAL / REVERSAL INSTRUCTIONS
DOOR REMOVAL AND REVERSAL INSTRUCTIONS:
NOTE
If you have stainless steel doors -- go to the Removing Stainless Steel Doors
and Handles Section on page 8.
Top Hinge
Cover
The direction in which your refrigerator doors open (door swing) can be
reversed, from left to right or right to left, by moving the door hinges from one
side to the other. Reversing the door swing should be performed by a
qualified person.
Top Hinge
IMPORTANT
Before you begin, turn the refrigerator temperature control to “0” and remove
the electrical power cord from the wall outlet. Remove any food from door
shelves.
1. Remove toe grille.
2. Remove top hinge cover. Trace around the hinge with a soft lead pencil.
This makes reinstallation easier. Remove top hinge and lift door off center
hinge pin. Set door aside.
3. Unscrew center hinge pin using adjustable wrench and save for
reassembly. Ensure plastic washer stays on hinge pin.
4. Lift refrigerator door off of bottom hinge and set aside.
5. Remove center hinge and shim by removing inside screw and
loosening two outside screws enough to allow hinge and shim to slide out.
Tighten screws.
6. Loosen two outside screws on opposite side of refrigerator, remove inside
screw and install center hinge.
7. Remove two screws on bottom hinge with 3/8” socket wrench.
8. Install bottom hinge on opposite side with the two screws removed from
step 7.
9. Unscrew bottom hinge pin using adjustable wrench. Move hinge pin to
other hole in hinge and tighten with adjustable wrench.
10. Reverse door handles (see instructions on next page).
11. Move freezer and refrigerator door stops to opposite side. Before starting
screws, use an awl to puncture the foam.
12. Position refrigerator door onto bottom hinge pin and screw center hinge pin
through center hinge into top of door. Close refrigerator door to help align
hinge hole.
13. Tighten center hinge pin with adjustable wrench.
14. Remove cabinet and hinge hole plugs and move to opposite side.
15. Lower freezer door onto center hinge pin.
16. Close freezer door. Have an assistant lift up on opposite side of door while
tightening screws to install top hinge.
17. Replace toe grille.
18. Plug in electrical power cord and turn refrigerator temperature control to
center position. Adjust setting as necessary.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
DOOR REMOVAL / REVERSAL INSTRUCTIONS
TO REMOVE FREEZER HANDLE:
NOTE
(Handles may be easier to reverse while doors are off.)
Some models have “pocket” handles, which are recessed
into the sides of the door. On these models, only the hinges
will need to be reversed.
1. Remove two screws attaching handle to bottom of freezer
door.
2. Swing bottom of handle away from the door and slide
handle straight up and off of dovetail button.
3. Remove screw and dovetail button and install on other
side, using the same holes as nameplate.
4. Magnetic Nameplate Models: Use putty knife to gently pry
magnetic nameplate frame from door. Remove nameplate
from its frame, turn frame upside down and install in old
handle holes. Insert magnetic nameplate into frame.
TO REMOVE FREEZER HANDLE:
(Handles may be easier to reverse while doors are off.)
1. Remove two screws attaching handle to bottom of freezer
door.
2. Remove short trim piece by sliding trim straight up and off
of handle bracket.
3. Remove screw attaching top of handle to door.
Self-Adhesive Nameplate Models: Use putty knife to
gently peel off nameplate from door and reapply over old
handle holes.
4. Magnetic Nameplate Models: Gently pry magnetic
nameplate frame from door. Remove nameplate from its
frame, turn frame upside down and install in old handle
holes. Insert magnetic nameplate into frame.
TO ATTACH FREEZER
HANDLE:
Self-Adhesive
Nameplate Models:
Gently peel off
nameplate from door
and reapply over old
handle holes.
1. Start with handle
offset away from
door. Place top of
handle over dovetail
button, swing handle
into an upright
TO ATTACH FREEZER
HANDLE:
1. Reinstall handle on
opposite side, using
same hole as
nameplate.
2. Attach handle to
bottom of door.
position and pull
downward, locking it
into place.
2. Secure bottom of
handle with two
screws removed
earlier.
TRIM REMOVAL (FULL-LENGTHTRIM MODELS ONLY)
3. Slide trim piece
straight down onto
handle bracket.
In some models, the refrigerator door has a full length trim
piece which continues from the bottom of the handle to the
bottom of the door. The top of the trim attaches to the handle
bracket (Figure 1) or fits around the base of the handle (Figure
2). An adhesive “trim lock” is positioned about halfway down.
The bottom of the trim is held in place by either an adhesive
trim lock, or a trim lock with two prongs inserted into a hole on
the face of the door.
TO REMOVE FREEZER HANDLE:
(Handles may be easier to reverse while doors are off.)
1. Remove two screws attaching handle to bottom of freezer
door.
2. Remove button plug using edge of putty knife.
3. Remove screw on side of freezer door and remove
handle.
TO REMOVETRIM:
1. Remove trim by gently pulling trim lock areas out and
away from door.
2. When trim is free from door, slide the trim straight down
and away from base of handle.
TO ATTACH FREEZER
HANDLE:
1. Secure side of
handle to door and
replace button plug.
2. Secure handle to
bottom of door.
NOTE
For models with short handle trim, remove by sliding trim
straight down and off of handle bracket.
NOTE
To remove freezer handle, refer to figure 3 on page 9.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
DOOR REMOVAL / REVERSAL INSTRUCTIONS
TO ATTACHTRIM:
TO REMOVE REFRIGERATOR HANDLE:
1. Slide both trim locks out of trim.
(Handles may be easier to reverse while doors are off.)
2. Insert new adhesive trim locks contained in your literature
pack.
Figure 1 Style Handles
1. Remove two screws attaching handle to top of refrigerator
door.
NOTE
2. Remove screw attaching bottom of handle to door.
3. Remove two hole plugs and hinge pin plug on top of door
and install on opposite side. Use Phillips head screwdriver
to remove plastic screw plug from front of door and install
on opposite side
Trim lock must be removed and installed by sliding over the
two donut shaped areas.
3. Install trim to handle by sliding under base of handle.
Carefully align trim and press down at trim lock locations.
4. Use rubbing alcohol to remove any adhesive residue from
old trim lock locations.
Figure 2 Style Handles
1. Remove two screws attaching handle to top of refrigerator
door.
2. Swing top of handle away from door and slide handle
down and off of dovetail button.
3. Remove screw and dovetail button and install on other
side, moving hole plugs from corresponding holes to
opposite side.
TO ATTACH REFRIGERATOR HANDLE:
Figure 1 Style Handles
1. Secure bottom of handle with screws.
2. Secure top of handle with screws.
Figure 2 Style Handles
1. Start with handle offset away from door. Place bottom of
handle over dovetail button, swing handle into an upright
position and pull upward, locking it into place.
2. Secure top of handle with screws.
TO REMOVE REFRIGERATOR HANDLE:
(Handles may be easier to
reverse while doors are off.)
Figure 1
1. Remove two screws
attaching handle to top of
refrigerator door.
2. Remove button plug
using edge of putty knife.
3. Remove screw on side of
refrigerator door and
remove handle.
4. Reverse freezer and
refrigerator handles as
Figure 3 - Handle Reversal
shown in figure 3.
TO ATTACH
REFRIGERATOR HANDLE:
1. Secure side of handle to
door and replace plug
button.
2. Secure handle to top of
door.
Figure 2
Refrigerator Door Without Trim
8
Download from Www.Somanuals.com. All Manuals Search And Download.
DOOR REMOVAL / REVERSAL INSTRUCTIONS
REMOVING STAINLESS STEEL DOORS AND HANDLES
5. Remove center hinge
and shim by removing
inside screw and
CAUTION
loosening two outside
screws enough to allow
hinge to slide out.
Use care when using tools near surface of stainless steel
doors to avoid scratching.
6. Remove bottom hinge.
Reinsert two outside
screws in holes and
tighten.
To Remove Doors
Stainless steel doors are not reversible. Follow these steps to
remove doors.
7. Reverse steps 1 - 6 to
reinstall doors
1. Remove toe grille and top hinge cover.
2. Remove top hinge and lift freezer door off of center hinge
pin. Set door aside.
Typical Handle
To Remove Handles
3. Unscrew center hinge bin using adjustable wrench and
save for reassembly. Ensure plastic washer stays on
hinge pin.
1. Firmly hold freezer handle while loosening set screws
with 3/32” allen wrench. Remove freezer handle.
2. Repeat step 1 for refrigerator door.
4. Lift refrigerator door off of bottom hinge and set aside.
FEATURES AT A GLANCE
Ice Tray
Freezer Light
Ice Maker
Ice Bucket
Freezer Shelf
Fixed Door Bin
Door Rack
Freezer
Control
Refrigerator
Control
Dairy Door
Deli Drawer
Cover
Tall Bottle
Retainer
Deli Drawer
Half Shelf
Snugger
Wine Rack
Door Bin
Full Shelf
Special Item Rack
Fixed Door Bin
Mid Level Light
Crisper Cover
Door Rack
Crisper
Drawers
Toe Grille
Features may vary according to model
9
Download from Www.Somanuals.com. All Manuals Search And Download.
TEMPERATURE CONTROLS
COOL DOWN PERIOD
TEMPERATURE ADJUSTMENT
To ensure safe food storage, allow the refrigerator to operate
with the doors closed for at least 8 to 12 hours before loading
it with food.
•
Adjust temperature gradually: move the knob in small
increments, allowing the temperature to stabilize.
•
•
For colder temperatures, turn the knob towards Colder.
For warmer temperatures, turn the knob towards Cold.
REFRIGERATOR & FREEZER CONTROLS
Turning the refrigerator control will change temperatures in
both compartments. For example, if the refrigerator control is
turned to a colder setting, the freezer control may have to be
adjusted to a warmer setting. Turning the freezer control will
change only the freezer temperature.
NOTE
When making changes to the temperature controls, wait 24
hours for the temperature to stabilize before making
additional changes.
To maintain temperatures, a fan circulates air in the
refrigerator and freezer compartments. For good circulation,
do not block cold air vents with food items.
NOTE
When first turning refrigerator on, move refrigerator and
freezer controls to Normal. This is the recommended initial
setting. After 24 hours, adjust the controls as needed.
* IMPORTANT
Turning the refrigerator temperature control to “0” turns off the
compressor and prevents the refrigerator from cooling, but
does not disconnect the power to the light bulb and other
electrical components. To turn off power to your refrigerator,
you must unplug the power cord from the wall outlet.
OR
Freezer Control (some models)
OR
OR
Refrigerator & Freezer Control (some models)
Refrigerator Control (some models)
TEMPERATURE ADJUSTMENT GUIDE
Turn Refrigerator Control Slightly Towards Colder.
Turn Refrigerator Control Slightly Towards Cold.
Turn Freezer Control Slightly Towards Colder.
Turn Freezer Control Slightly Towards Cold.
Turn Refrigerator Control To 0.
If Refrigerator compartment Is Too Warm
If Refrigerator compartment Is Too Cold
If Freezer compartment Is Too Warm
If Freezer compartment Is Too Cold
* To Turn Refrigerator Off
10
Download from Www.Somanuals.com. All Manuals Search And Download.
LOOKING INSIDE
DOOR STORAGE
CAUTION
Door bins, shelves, and racks are provided for convenient
storage of jars, bottles, and cans. Frequently used items can be
quickly selected.
To avoid personal injury or property damage, handle
tempered glass shelves carefully. Shelves may break
suddenly if nicked, scratched, or exposed to sudden
temperature change.
Some models have door
racks or bins that can
accommodate gallon-sized
plastic drink containers and
economy-sized jars and
containers. Some racks are
adjustable for maximum
storage capacity.
SHELF ADJUSTMENT
Refrigerator shelves are easily adjusted to suit individual
needs. Before adjusting the shelves, remove all food.
To adjust sliding shelves:
The dairy compartment,
which is warmer than the
general food storage section,
is intended for short term
1
2
Remove shelf by pulling forward to stop position.
Lift front edge up and pull out.
Replace the shelf on any pair of rails by reversing this
procedure.
Door Rack
storage of cheese, spreads,
or butter.
ADJUSTABLE DOOR BINS
Some models have adjustable door bins that can be moved to
suit individual needs.
To move door bins
1. Lift bin straight up.
2. Remove bin.
Sliding Glass Shelf
Sliding Wire Shelf
To adjust cantilever shelves:
3. Place bin in
desired position.
4. Lower bin onto
supports until
NOTE
locked in place.
Cantilever shelves are supported at the back of the
refrigerator. Cantilever shelves are available in either glass
or wire.
Adjustable
Door Bin
1
2
Lift front edge up.
Pull shelf out.
Replace the shelf by inserting the hooks at rear of the shelf into
the wall bracket. Lower the shelf into the desired slots and lock
into position.
SpillSafeTM glass shelves (some models) catch and hold
accidental spills. In some models, the SpillSafeTM shelves slide
out for easy access to food and for fast cleaning. The shelves
slide out independently of the cantilever brackets. Just pull the
front of the shelf forward. The shelf can be extended as far as
the stopper will allow but it is not removable from the cantilever
bracket.
TALL BOTTLE RETAINER (SOME MODELS)
The Tall Bottle Retainer keeps tall containers in the bin from
falling forward when opening or closing the refrigerator door.
To install, hold the retainer at the top, and slide it over the
outside wall of the bin, as shown in the diagram. The Tall Bottle
Retainer works best with a Bin Snugger.
Tall Bottle Retainer (left) and Bin Snugger (right)
Full Width Cantilever
Glass Shelf
Cantilever Glass Shelf
Fixed and Sliding
11
Download from Www.Somanuals.com. All Manuals Search And Download.
LOOKING INSIDE (CONTINUED)
SPECIAL ITEM RACK (SOME MODELS)
FREEZERTILT OUT
DOORRACK
The innovative design of the
Special Item Rack allows you
to store a six-pack of 12 ounce
drink cans, a bottle of wine, a
two-liter soft drink bottle, or a
carton of eggs. The Special
Item Rack mounts on the left
side of your refrigerator. To
install, just slide the Special
Item Rack onto any shelf as
shown in the drawing.
Special Item Rack
Freezer Tilt Out Door Rack
CRISPERS (SOME MODELS)
The crispers, located under
the bottom refrigerator shelf,
are designed for storing fruits,
vegetables, and other fresh
produce. Wash items in clear
water and remove excess
water before placing them in
the crispers. Items with strong
odors or high moisture content
should be wrapped before
storing.
HUMIDITY CONTROL
(SOME MODELS)
The Humidity Control,
present on some models
with crisper drawers, allows
you to adjust the humidity
within the crisper. This can
extend the life of fresh
vegetables that keep best in
high humidity.
Crisper Humidity
Control
Crisper Drawer
NOTE
Leafy vegetables keep best when stored with the Humidity
Control set on High Humidity, or in a drawer without a
Humidity Control. This keeps incoming air to a minimum and
maintains maximum moisture content.
DELI DRAWER (SOME
MODELS)
Some models are equipped
with a Deli Drawer for storage
of luncheon meats, spreads,
cheeses, and other deli items.
Deli Drawer
WINE RACK (SOME
MODELS)
The Wine Rack stores bottles
of wine, or single two-liter
plastic bottles of juice or soda
pop. To install, slide the Wine
Rack onto the shelf with the
curve facing in. To remove,
slide the Wine Rack out.
Install on either side of shelf.
Wine Rack
12
Download from Www.Somanuals.com. All Manuals Search And Download.
FOOD STORAGE & ENERGY SAVING IDEAS
ENERGY SAVING IDEAS
Locate the refrigerator in the coolest
part of the room, out of direct
sunlight, and away from heating
ducts or registers. Do not place the
refrigerator next to heat-producing
appliances such as a range, oven,
or dishwasher. If this is not possible,
a section of cabinetry or an added
FOOD STORAGE IDEAS
Fresh Food Storage
•
•
The fresh food compartment should be kept between 34°F
and 40° F with an optimum temperature of 37° F.
Avoid overcrowding the refrigerator shelves. This reduces
the circulation of air around the food and results in uneven
cooling.
•
Fruits andVegetables
layer of insulation between the two appliances will help
the refrigerator operate more efficiently.
Level the refrigerator so that the doors close tightly.
Refer to this Use & Care Manual for the suggested
temperature control settings.
•
Storage in the crisper drawers traps moisture to help
preserve the fruit and vegetable quality for longer time
periods.
•
•
Meat
•
•
•
•
Periodic cleaning of the condenser will help the
refrigerator run more efficiently. See the Care and
Cleaning Chart .
Do not overcrowd the refrigerator or block cold air vents.
Doing so causes the refrigerator to run longer and use
more energy.
Cover foods and wipe containers dry before placing them
in the refrigerator. This cuts down on moisture build-up
inside the unit.
Organize the refrigerator to reduce door openings.
Remove as many items as needed at one time and close
the door as soon as possible.
•
Raw meat and poultry should be wrapped securely so
leakage and contamination of other foods or surfaces
does not occur.
Frozen Food Storage
•
•
The freezer compartment should be kept at 0° F or lower.
A freezer operates most efficiently when it is at least 2/3
full.
Packaging Foods for Freezing
•
To minimize dehydration and quality deterioration, use
aluminum foil, freezer wrap, freezer bags or airtight
containers. Force as much air out of the packages as
possible and seal them tightly. Trapped air can cause food
to dry out, change color, and develop an off-flavor (freezer
burn).
•
•
Wrap fresh meats and poultry with suitable freezer wrap
prior to freezing.
Do not refreeze meat that has completely thawed.
Loading the Freezer
•
•
•
Avoid adding too much warm food to the freezer at one
time. This overloads the freezer, slows the rate of freezing,
and can raise the temperature of frozen foods.
Leave a space between the packages, so cold air can
circulate freely, allowing food to freeze as quickly as
possible.
Avoid storing hard-to-freeze foods such as ice cream and
orange juice on the freezer door shelves. These foods are
best stored in the freezer interior where the temperature
varies less.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
ICE SERVICE
If your refrigerator has an automatic ice maker, it will provide a
ICE MAKERTIPS
sufficient supply of ice for normal use. During the initial startup
of your refrigerator, no ice will be produced during the first 24
hours of operation. Air in new plumbing lines may cause the
ice maker to cycle two or three times before making a full tray
of ice. With no usage, it will take approximately one to two days
to fill the ice container.
•
Ice cubes stored too long may develop an odd flavor.
Empty the ice container and ensure that the wire signal
arm is in its “down” or ON position. The ice maker will then
produce more ice.
Occasionally shake the ice container to keep ice
separated.
Stop the ice maker when cleaning the freezer and during
vacations.
If the ice maker will be turned off for a long period of time,
turn the water supply valve to a closed position.
•
•
•
New plumbing connections may cause the first production of
ice cubes to be discolored or have an odd flavor. Discard ice
made during the first 24 hours.
NOTE
NOTE: Automatic ice makers are also optional accessories
that may be installed in most models at any time. Call your
local dealer for information.
NOTE
For information on ice maker noises, see Normal Operating
Sounds and Sights section.
TURNINGYOUR ICE MAKER ON
After the plumbing connections have been completed, the
water supply valve must be opened. Place the ice container
under the ice maker, pushing it as far back as possible. Lower
the wire signal arm to its “down” or ON position.
CAUTION
DO NOT place the ice container in your dishwasher.
•
•
•
Wash the ice container in warm water with mild detergent.
Rinse well and dry.
Stop the ice maker when cleaning the freezer and during
vacations.
If the ice maker will be turned off for a long period of time,
turn the water supply valve to the closed position.
TURNINGYOUR ICE MAKER OFF
To stop the ice maker, lift the
wire signal arm until it clicks and
locks in the “up” or OFF position.
The ice maker also turns off
automatically when the ice
container is full. If your model
has an adjustable freezer shelf,
place the shelf in the lower
position, so that the wire signal
arm will hit the ice when the
container is full.
IMPORTANT
Your ice maker is shipped from the factory with the wire
signal arm in the ON position. To ensure proper function of
your ice maker, hook up water supply immediately or turn ice
maker OFF by lifting the wire signal arm until it clicks and
locks in the UP position. If the ice maker is not turned off
and the water supply is not connected, the water valve will
make a loud chattering noise.
ICE PRODUCTION:WHATTO EXPECT
The ice maker will produce 2.5 to 3 pounds of ice every 24
hours depending on usage conditions. Ice is produced at a
rate of 8 cubes every 80 to 160 minutes.
CAUTION
Chemicals from a malfunctioning softener can damage
the ice maker. If the ice maker is connected to soft water,
ensure that the softener is maintained and working
properly.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
NORMAL OPERATING SOUNDS & SIGHTS
UNDERSTANDINGTHE SOUNDSYOU MAY HEAR
A. Evaporator
The flow of refrigerant through the evaporator may
create a boiling or gurgling sound.
Your new high-efficiency refrigerator may make unfamiliar
sounds. These are all normal sounds and soon will become
familiar to you. They also indicate your refrigerator is operating
as designed. Hard surfaces, such as vinyl or wood floors,
walls, and kitchen cabinets may make sounds more
B. Evaporator Fan
You may hear air being forced through the refrigerator
by the evaporator fan.
noticeable. Listed below are descriptions of some of the most
common sounds you may hear, and what is causing them.
C. Defrost Heater
During defrost cycles, water dripping onto the defrost
heater may cause a hissing or sizzling sound. After
defrosting, a popping sound may occur.
NOTE
Rigid foam insulation is very energy efficient, but is not a
sound insulator.
IMPORTANT
During the automatic defrost cycle, you may notice a red
glow in the vents on the back wall of your freezer
compartment. This is normal during the defrost cycle.
D. Automatic Ice Maker
If your refrigerator is equipped with an automatic ice
maker, you will hear ice cubes falling into the ice bin.
E. Cold Control & DefrostTimer or Automatic
Defrost Control
These parts can produce a snapping or clicking sound
when turning the refrigerator on and off. The timer also
produces sounds similar to an electric clock.
F. Condenser Fan
If condenser coils are located underneath your
refrigerator as shown in the drawing at the left, you
have a condenser fan. You may hear air being forced
through the condenser by the condenser fan.
G. Compressor
Modern, high-efficiency compressors operate much
faster than older models. The compressor may have a
high-pitched hum or pulsating sound.
H. WaterValve
If your refrigerator is equipped with an automatic ice
maker, you will hear a buzzing sound as the water valve
opens to fill the ice maker during each cycle.
I. Drain Pan (Nonremovable)
You may hear water running into the drain pan during
the defrost cycle. The drain pan will be located on top
of the compressor for air-cooled condensers (black coils
on back of refrigerator).
J. Condenser Coils (Fan-cooled models only)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE & CLEANING
Keep your refrigerator and freezer clean to prevent odor build-up. Wipe up any spills immediately and clean both sections at
least twice a year. Never use any type of scouring pads, brushes, abrasive cleaners or strong alkaline solutions on any surface.
Do not wash any removable parts in a dishwasher. Always unplug the electrical power cord from the wall outlet before
cleaning.
CAUTION
•
When moving the refrigerator, pull straight out. Do not shift the refrigerator from side to side as this may tear or
gouge the floor covering. If the refrigerator has an automatic ice maker, be careful not to move the refrigerator
beyond the plumbing connections.
•
•
Damp objects stick to cold metal surfaces. Do not touch refrigerated surfaces with wet or damp hands.
Never use CHLORIDE to clean stainless steel.
NOTE
•
Turning the refrigerator temperature control to “0” turns off the compressor, but does not disconnect electrical power to the
light bulb or other electrical components. To turn off power to your refrigerator, you must unplug the power cord from the
wall outlet.
•
Do not use razor blades or other sharp instruments which can scratch the appliance surface when removing adhesive
labels. Any glue left from tape or labels can be removed with a mixture of warm water and mild detergent, or, touch the glue
residue with the sticky side of tape you have already removed. Do not remove the serial plate.
Care & Cleaning Chart
Part
What To Use
Tips and Precautions
•
•
Soap and water
Baking soda and water
Interior/Door
Liner
Use 2 tablespoons of baking soda in 1 quart of warm water. Be sure to wring
excess water out of sponge or cloth before cleaning around controls,
light bulb or any electrical part.
Wipe gaskets with a clean soft cloth.
•
•
Soap and water
Soap and water
Door Gaskets
Drawers/Bins
Glass Shelves
Do not wash any removable items (bins, drawers, etc.) in dishwasher.
Allow glass to warm to room temperature before immersing in warm water.
•
•
•
•
•
•
•
Soap and water
Glass cleaner
Mild liquid sprays
Soap and water
Mild liquid sprays
Vacuum attachment
Soap and water
Vacuum dust from front of toe grille. Remove toe grille Vacuum backside and
wipe with sudsy cloth or sponge. Rinse and dry.
Toe Grille
Do not use commercial household cleaners, ammonia, or alcohol to clean
handles.
Exterior and
Handles
•
•
•
Soap and water
Ammonia
Stainless Steel Cleaners
Exterior and
Handles
CAUTION: Never use CHLORIDE to clean stainless steel.
Clean stainless steel front and handles with non-abrasive soapy water and a
dishcloth. Rinse with clean water and a soft cloth. Wipe stubborn spots with an
ammonia-soaked paper towel, and rinse. Use a non-abrasive stainless steel
cleaner. These cleaners can be purchased at most home improvement or
major department stores. Always follow manufacturer's instructions.
NOTE: Always clean, wipe and dry with the grain to prevent cross-grain
scratching. Wash the rest of the cabinet with warm water and mild liquid
detergent. Rinse well, and wipe dry with a clean soft cloth.
(Stainless Steel
Models Only)
No need to clean unless operating refrigerator under particularly dusty or
greasy conditions, or if there is significant pet traffic in your home. If cleaning
is necessary, remove toe grille and use extended vacuum attachment and
condenser cleaning brush to remove dust build-up from condenser coils (see
item “J” in “NORNAL OPERATING SOUNDS & SIGHTS”).
Use the dusting tool attachment on your vacuum to remove dust build-up on
the condenser coils (black tubes and wires) attached to the back of air-cooled
refrigerators only.
•
•
•
Condenser Cleaning
Brush is available from
your dealer.
Condenser
Coils
(Fan-cooled
models only)
Vacuum Cleaner
Condenser
Coils
(Air-cooled
models only)
Vacuum Cleaner
Soap and water
Some models have defrost water pan located on top of compressor at bottom
rear of refrigerator (see illustration on next page). Wipe water pan with damp
cloth. NOTE: The defrost water pan is NOT removable.
•
Defrost Water
Pan
•
•
Soap and water
Mild liquid sprays
Exterior
CAUTION: DO NOT use abrasive or stainless steel cleaners on Easy
Care Stainless Steel Models. It will remove the protective finish.
(Easy Care
Stainless Steel
Models)
Use warm soapy water to clean Easy Care surfaces. Mild liquid sprays may
be used on stubborn spots.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE & CLEANING (CONTINUED)
NEVER CLEAN CONDENSER (SOME MODELS)
CAUTION
If your refrigerator is
equipped with a
Never Clean
Avoid cuts when replacing light bulbs, wear gloves.
condenser, there’s
no need to clean the
condenser under
normal operating
conditions. If the
refrigerator is
operated under
particularly dusty or
greasy conditions, or
if there is significant
pet traffic in your
Defrost Water Pan (some models)
home, it may be necessary to periodically clean the condenser
for maximum efficiency.
Freezer Light Cover Removal
REPLACINGTHE FREEZER LIGHT BULB (SOME
MODELS)
1. Unplug refrigerator.
2. Wear gloves as protection against possible broken glass.
3. Unsnap light shield as shown.
4. Unscrew and replace old bulb with an appliance bulb of
the same wattage.
5. Replace light shield.
6. Remember to plug the refrigerator back in.
Refrigerator Mid-Level Light Cover Removal
Vacation and Moving Tips
•
•
•
Leave refrigerator operating during vacations of 3 weeks or less.
Short
Vacations
Use all perishable items from refrigerator compartment.
Turn automatic ice maker off and empty ice bucket, even if you will only be gone for a
few days.
•
•
•
•
•
Remove all food and ice if you will be gone one month or more.
Turn controls to "O" ( the OFF position) and disconnect power.
Turn off automatic ice maker and turn water supply valve to closed position.
Clean interior thoroughly.
Leave both doors open to prevent odors and mold build-up. Block doors open if
necessary.
Long
Vacations
•
•
•
•
Remove all food and ice.
If using handcart, load from side.
Adjust rollers all the way up to protect them during sliding or moving.
Pad cabinet to avoid scratching surface.
Moving
17
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
REFRIGERATOR WARRANTY
Your refrigerator is protected by this warranty
WARRANTY
PERIOD
THROUGH OUR AUTHORIZED SERVICERS,
WE WILL:
THE CONSUMER WILL BE RESPONSIBLE FOR:
One year from original
purchase date
Pay all costs for repairing or replacing any parts of this
appliance which prove to be defective in materials or
workmanship. Excludes original and replacement Ice
& Water filter cartridges (if equipped). Original and
replacement cartridges are warranted for 30 days
(parts only).
FULL ONE-YEAR
WARRANTY
Costs of service calls that are listed under NORMAL
RESPONSIBILITIES OF THE CONSUMER. *
* In addition to warranty shown above, ask your dealer about Crosley Extended Limited Warranty that comes to you at no extra charge for the 2nd through 10th
years.
In the U.S.A., your appliance is warranted by Crosley Corporation. We authorize no person to change or add to any of our obligations under this
warranty. Our obligations for service and parts under this warranty must be performed by an authorized Crosley Corporation servicer. In Canada, your
appliance is warranted by Crosley Canada Corp.
This warranty applies only to products in ordinary household use, and the consumer is responsible for the
items listed below:
*NORMAL
RESPONSIBILITIES
OF THE CONSUMER
1. Proper use of the appliance in accordance with instructions provided with the product.
2. Proper installation by an authorized servicer in accordance with instructions provided with the appliance and in
accordance with all local plumbing, electrical and/or gas codes.
3. Proper connection to a grounded power supply of sufficient voltage, replacement of blown fuses, repair of loose
connections or defects in house wiring.
4. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves,etc.,
which are not a part of the appliance when it was shipped from the factory.
5. Damages to finish after installation.
6. Replacement of light bulbs and/or fluorescent tubes (on models with these features).
This warranty does not cover the following:
EXCLUSIONS
1. CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL
EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN OR ANY IMPLIED WARRANTY.
NOTE: Some states do not allow the exclusion or limitation of incidental or consequential damages, so this
limitation or exclusion may not apply to you.
2. Service calls which do not involve malfunction or defects in workmanship or material, or for appliances not in
ordinary household use. The consumer shall pay for such service calls.
3. Damages caused by services performed by servicers other than Crosley Corporation, Crosley Canada Corp. or
its authorized servicers; use of parts other than genuine Crosley Corporation parts; obtained from persons other
than such servicers; or external causes such as abuse, misuse, inadequate power supply or acts of God.
4. Products with original serial numbers that have been removed or altered and cannot be readily determined.
Keep your bill of sale, delivery slip, or some other appropriate payment record. The date on the bill establishes the
warranty period should service be required. If service is performed, it is in your best interest to obtain and keep all
receipts. This written warranty gives you specific legal rights. You may also have other rights that vary from state to
state. Service under this warranty must be obtained by contacting Crosley Corporation or Crosley Canada Corp.
IF YOU NEED
SERVICE
This warranty only applies in the 50 States of the U.S.A., in Puerto Rico, and in Canada. Product features or specifications as described or illustrated
are subject to change without notice. All warranties are made by Crosley Corporation. In Canada, your appliance is warranted by Crosley Canada
Corp.
Rev. 01/2006
FOR PRODUCT INFORMATION CONTACT:
FOR WARRANTY INFORMATION CONTACT:
336-761-1212
Crosley Corporation
111 Cloverleaf Dr.
USA
800-944-9044
Canada 800-668-4606
Winston-Salem, NC 27103
18
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU CALL
1-800-944-9044 (United States)
1-800-668-4606 (Canada)
Visit our web site at
Before calling for service, review this list. It may save you time and expense. This
list includes common occurrences that are not the result of defective workmanship
or materials in this appliance.
Common
Occurrences
•
•
•
•
Ensure plug is tightly pushed into electrical outlet.
Check/replace fuse with a 15 amp time-delay fuse. Reset circuit breaker.
The temperature control is turned to "O".
Refrigerator may be in defrost cycle. Wait 20 minutes and check again.
Refrigerator does not run.
Freezer temperature too cold.
Refrigerator temperature is
satisfactory.
•
Set freezer control to a warmer setting until freezer temperature is satisfactory.
Allow 24 hours for the temperature to stabilize.
Refrigerator temperature too cold.
Freezer temperature is satisfactory.
•
Set refrigerator control to a warmer setting. Allow 24 hours for temperature to
stabilize. Then check freezer temperatures and adjust as needed.
•
•
•
The cabinet is not level.
Floor is weak.
See Normal Operating Sounds and Sights section.
Refrigerator is noisy or vibrates.
Odors in refrigerator.
•
•
Interior needs to be cleaned.
Foods that produce odors should be covered or wrapped.
•
•
•
Replace light bulb.
Ensure plug is tightly pushed into electrical outlet.
Light switch may be stuck. Push in light switch, located on the refrigerator
control box, to release.
Cabinet light not working.
•
•
•
•
•
Ensure the Wire Signal Arm is not in UP position.
Ice maker should produce 2.5 to 3 pounds of ice in a 24 hour period.
Water supply is turned off.
Water pressure is too low.
The freezer is not cold enough.
Automatic ice maker not working.
(some models)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
|