Two-Way FM Remote
USER’S GUIDE
By Firstech, Inc.
Website: www.compustar.org
© 2001 Firstech, Inc. Page 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information
Please take these safety precautions under the following conditions:
1. Servicing the vehicle
When servicing (i.e. changing the oil, washing your car) your automobile, the
CompuStar system should be in Valet Mode. There is a safety shutdown switch
under the hood that deactivates the remote starter function if the hood is open.
However, if the switch has been damaged or the switch has been installed
improperly, the vehicle may start when Button II is pressed for 2 seconds even if
the hood is open.
2. Loaning your vehicle to others
Whenever you loan your vehicle to an individual who is not familiar with
Compustar, please put the vehicle in Valet mode. This will prevent the vehicle
loaner from accidentally activating the CompuStar auto-security system.
3. For manual transmission vehicles
If the Compustar 2WSSR is installed in a manual transmission vehicle, extra
precautions are required because the Compustar does not monitor the gear shift:
Important! Under normal circumstances, Reservation Mode is cancelled when a
door or hatchback opens. Please verify if the opening of any door or hatchback
cancels Reservation Mode. If any of the doors or hatchback is not monitored by
CompuStar because of improper installation or a faulty dome light switch, do not
use the CompuStar and take your vehicle to the dealer immediately for repair.
Do not set Reservation Mode when the window(s) are open or if there is anyone
inside of the vehicle including animals.
Remote-Pager: 2WFMR w/LCD
The model name, 2WFMR, stands for Two Way Frequency Modulation Remote
with Liquid Crystal Display. This transmitter that allows you to activate multiple
functions by pressing a combination of 4 buttons on the unit in order to transmit
signals.
© 2001 Firstech, Inc. Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
CompuGLO color LCD
The remote-pager comes with CompuGLO which is a unique color LCD display
that visually tells the vehicle owner the security status of your car at all times.
There are differing icons that will appear on your CompuGLO LCD indicating
what your vehicle is currently doing.
Auto
Turbo Timer
Passive
Icon
Explanation
Auto
Turbo
Indicates if the Auto Arm/Disarm mode is on or off.
IndicateS if Turbo Mode is on or off.
Timer
Passive
Hammer
Indicates if Timer Start Mode is on or off.
Indicates if Passive Arming Mode is on or off.
Indicates that the first or second stage shock sensor has been
triggered.
Remote
Indicates that Shock sensor is by-passed or not.
Vibration
Zzzz
Indicates if you are in Valet Mode.
Parking Lights
Car Siren
Indicates if your car parking lights are flashing.
Indicates that your car siren is turned on or off when you lock or
unlock the vehicle.
Phone
Lock/Unlock
Transmitting
Indicates that someone is paging you from your vehicle.
Displays if your car is armed or disarmed.
Indicates if your remote-pager is transmitting signals to the
controller unit.
© 2001 Firstech, Inc. Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery
Displays remaining battery life.
Blinking Battery Displays running time left – each bar represents 25% of the
while engine
running
Door
running time.
Displays if your door is open.
Exhaust Fumes Displays if your vehicle has auto-started properly or ignition on.
Trunk
Hood
Displays if your trunk is open.
Displays if your hood is open.
Remote-Pager Button Functions
Button
I
Pressed For Function
1.
1/2 sec
Alarm Mode - on/off, RPS – on/off,
Siren Off, Starter Kill (Anti-Grind) –
on/off
2.
3.
4.
II
III
IV
1/2 sec
1/2 sec
1/2 sec
Auxiliary Option 1
Auxiliary Option 2
Query Function
5.
6.
7.
8.
I -
2 sec
2 sec
2 sec
2 sec
Auto Lock On/Off
II -
III -
IV -
Auto-start Function - on/off
Trunk Release – on/off
Panic, Press I to shut off Siren.
9.
(I+II)
1/2 sec
1/2 sec
1/2 sec
1/2 sec
1/2 sec
Siren Chirps for Lock/Unlock-on/off
Valet Mode – on/off
Passive Arming – on/off
Timer Start Mode - on/off
Turbo Mode - on/off
10.
11.
12.
13.
(I+III)
(II+III)
(II+IV)
(III+IV)
14
16.
17.
(I+III) -
(I+II) -
(I+IV) -
2 sec
2 sec
2 sec
Shock Sensor – on/off
Programming Menu 1 – Installer Only
Programming Menu 2 – Installer Only
© 2001 Firstech, Inc. Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:
- meand pressing the button for 2 seconds.
(
(
) means simultaneously pressing the buttons
) – means simultaneously pressing the buttons for 2 seconds
Remote-Pager Learn Routine
If you replace or add additional remotes, you can program up to three remotes,
please perform the following procedure:
Step 1: Activate Valet/Programming mode by manually turning the ignition on
and off five times (between Acc and On) with car key within a 10 second period.
The parking light will flash once with successful completion of this step.
Step 2: Within a 10 second period after cycling the ignition for the 5th time, press
button I. The car parking lights will flash once to confirm that the transmitter has
been programmed. Continue program the additional remotes. The parking lights
will flash two times when the programming mode is expired.
Alarm Mode
You can arm or disarm alarm mode by pressing Button I for a ½ second.
Press Buttons (I+II) for a ½ second to make your car siren mute when arming or
disarming your vehicle. Keep in mind that your car siren will still activate for all
other modes (i.e. panic, alarm, shock sensor) regardless of whether or not your
car siren is in mute mode. The car siren will be mute only when arming or
disarming your vehicle.
In alarm mode, the starter kill function (this maybe an optional feature provided
by your installer) is activated. This feature disengages the starter mechanism on
© 2001 Firstech, Inc. Page 6
Download from Www.Somanuals.com. All Manuals Search And Download.
your car that prevents you from starting your car even with a manual key when
your vehicle’s alarm mode is activated.
Note: If you lose your remote after you have armed the vehicle, use your key to
open the vehicle. The siren will go off. Turn on and off ignition 5 times with your
key to shut off the siren and turn the system into valet mode. Cancel the valet
mode with remote later. See Valet mode.
Note: (Siren duration is 30 to 60 sec depending on the options set at the time of initial
installation.)
Dual Stage Shock Sensor
Press Buttons (I+III) for 2 seconds to activate or deactivate the dual stage shock
sensor. The dual stage shock sensor will activate 30 seconds after the
CompuStar alarm mode is armed. When the dual shock sensor is engaged, the
remote-pager security alerts will be triggered by the following:
I. Light impact to your vehicle will activate the first stage shock sensor
and the car siren will chirp 4 times in addition to the parking lights flashing
4 times. The remote pager unit will beep and the hammer icon shows up a
couple times
II. Heavy impact to your vehicle will activate the second stage shock
sensor and the car siren will chirp for 30 to 60 seconds and the parking
lights will flash for 30 to 60 seconds. The remote-pager will be notified
audibly and a hammer icon will blink in the CompuGLO LCD. Press
Button I for a ½ second to turn off the second stage shock sensor sirens
and flashing lights.
Auto-Start Function
Press Button II for 2 seconds to auto-start an automatic transmission engine.
Remember that a manual key in the ignition is required to drive the car. In
addition, the anti-grind circuit (this maybe an optional feature provided by your
installer) prevents you from re-cranking the starter on a remote-started vehicle.
Press Button II for 2 seconds in order to turn off an auto-started car. For manual
transmission vehicles, please use reservation mode.
© 2001 Firstech, Inc. Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
The engine will run 15 or 25 minutes (25 or 40 min for diesel) depending on
preset options at the time of installation and then shut off. If your remote-pager
has a problem starting the vehicle, CompuStar will try 2 additional times. If the
engine does not start after the third attempt, please call your authorized
CompuStar dealer.
Flashing Battery Icon during remote start. The battery icon flashes while
engine running. Each of the 4 bars of the battery indicates 25% of the
remaining engine running time.
Continuation Mode:
While your vehicle is running with your key, if you press button II for 2 seconds,
you are now in the continuation mode. Your engine will continue running for the
preset time even if you take your key from the ignition. With this mode, the
engine will continue running without key during your quick stop at, for example, a
grocery store.
Diagnosing problems with Auto-Start
If there is a problem in auto-starting your car, you will hear three chirps when you
attempt to auto-start the car. Wait for 2 seconds and the cause for the error will
be indicated by the number of times the car chirps and parking lights flash.
Error Number (# of times the car chirps
ErroReason
& parking lights flash)
1
2
3
4
5
6
7
Engine On
Key On
Door Open
Trunk Open
Brake/E-Brake On
Hood Open
Reservation Off (Manual Transmission Only)
Reservation Mode (manual transmission only)
In order to auto-start your manual transmission car, you must first set the
CompuStar system to Reservation Mode before leaving your vehicle. The
purpose of Reservation Mode is to leave the transmission gear in the neutral
position when you leave your vehicle. Reservation mode is intended for use in
MANUAL TRANSMISSIONS ONLY and NOT FOR AUTOMATIC
© 2001 Firstech, Inc. Page 8
Download from Www.Somanuals.com. All Manuals Search And Download.
TRANSMISSIONS. Reservation Mode must be engaged each and every time you
leave your manual transmission car in order to auto-start the vehicle.
Note: The system is not recommended for vehicles with removable tops.
Important Requirements to activate Reservation Mode
?? The transmission must be in the NEUTRAL position.
?? The vehicle windows must be rolled up.
?? Do not set the reservation mode with people in the vehicle.
?? Do not auto-start the car with people in the vehicle.
Activating Reservation Mode (MANUAL TRANSMISSION ONLY)
Step 1: After arriving at your destination, and BEFORE TURNING YOUR
ENGINE OFF, place the transmission in the Neutral position.
Step 2: Remove your foot from the foot brake.
Step 3: Activate the parking brake.
Step 4: Remove the key from the ignition. The engine will remain running.
Step 5: Exit the vehicle and close the door within two minutes after activating the
parking brake. The engine will shut off and reservation mode for the remote
starter is now complete.
Your vehicle is now ready for auto-starting. However, the reservation mode will
be cancelled if the door is opened or the CompuStar system is put in Valet mode
after the reservation has been set. Once cancelled, you will have to start the
vehicle with the manual key and repeat the above 5 steps if you want to restore
reservation mode.
Important! If you try to auto-start the vehicle when reservation mode has not
been set or turned on, the auto-start feature will not work. When you press the
auto-start button, the remote beeps three times, the car parking lights will flash
five times and the siren chirps three times. A couple of seconds later, the cause
for the error will be indicated by the number of times the car chirps and parking
lights flash. See Page 11 for error messages.
Canceling Reservation Mode
© 2001 Firstech, Inc. Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
If you do not want to set reservation mode, shut off the engine before you exit the
vehicle. The engine will shut off for the following reasons:
?? You did not activate the parking brake or press the foot brake when you
turned the manual key to the off position.
?? You released the parking brake while the engine was running.
?? You entered Valet Mode after the Reservation Mode has been
completed.
Error Messages
If there is a problem in auto-starting your car, you will hear three chirps when you
attempt to auto-start the car. Wait for 2 seconds and the cause for the error will
be indicated by the number of times the car chirps and parking lights flash.
Error Number (# of times the
Errr Reason
car chirps & parking lights flash)
1
2
3
4
5
6
7
Engine On
Key On
Door Open
Trunk Open
Brake On, Emergency Brake Released
Hood Open
Reservation Off (Manual Transmission
Only)
Trunk Release
Press Button III for 2 seconds in order to unlock and release your trunk door.
Note that the trunk release function will not only release the trunk but will unlock
all the doors as well.
Query Function
Query Function allows the owner to visually monitor the status of your car by
looking at the remote-pager CompuGLO LCD icons. Press Button IV for a ½
second to activate the Query Function.
© 2001 Firstech, Inc. Page 10
Download from Www.Somanuals.com. All Manuals Search And Download.
Panic Mode
Press Button IV for 2 seconds to enter Panic Mode. In this mode, the car will arm
if not armed already and the siren will activate and the parking lights will flash. In
order to disengage Panic Mode, press Button I for ½ second. Then, press Button
I for a ½ second to unlock/disarm your vehicle.
If Anti-Jacking option has been programmed (ask your dealer if you like
to have this option) and the Ignition-Kill has been installed , the Panic
Mode works as Anti-Jacking if the car key in the ignition. In Anti-
Jacking mode is activated while key is in the ignition,
a)Siren will go off for 1.5 minutes, and b) Ignition-Kill will be
activated after the first 30 seconds. That is to give warning to the
hijacker for the first 30 seconds and then to disconnect the ignition
after that to stop the vehicle
Valet Mode
The only feature operating in valet mode is the keyless entry function and
optional auxiliary functions. Valet Mode is very useful when washing your vehicle
or having it serviced.
In order to enter Valet mode, press Buttons (I+III) simultaneously for a ½ second.
In order to manually enter Valet Mode, insert your car key into the ignition and
turn the ignition on and off (between ACC and ON) five times within 10 seconds
You can exit Valet Mode only by pressing Buttons (I+III) simultaneously for a ½
second.
© 2001 Firstech, Inc. Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer Start Mode
In Timer Start Mode, your car automatically starts every 1.5 or 3.0 hours
depending on preset options during the time of installation for a 24-hour period.
This mode is deleted automatically after 24 hours or once you start your car with
either your manual key or remote-pager. In order to enter Timer Start Mode,
press Buttons (II+IV) simultaneously for a ½ second.
Also, note that Timer Start Mode becomes Cold Start Mode once an optional
temperature sensor is installed.
Important! Timer Start Mode should be used only in open areas. Never start and
run the vehicle in an enclosed space such as a garage or carport.
Safety Shut Down Features
CompuStar 2WSSR system has several shut down safety features. The following
actions will shut down the engine or prevent the car from auto-starting:
Opening of the car engine hood, Pressing of the brake or Valet mode is turned
on.
RPS (Remote Paging System)
The optional RPS is a feature that allows an individual to page the owner of a
vehicle by simply tapping on the front windshield of the car. RPS is automatically
turned on upon activating alarm mode (pressing Button I for a ½ second) on the
CompuStar 2WFMR.
The RPS module can be activated by tapping a manual key producing a high-
frequency vibration. This high-frequency vibration is detected and your remote-
pager will beep and a telephone icon will appear on the CompuGLO LCD
indicating that someone is paging you from your vehicle. Press Button I, II, III or
IV for a ½ second to deactivate the RPS visual and audible paging alerts.
© 2001 Firstech, Inc. Page 12
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTIONAL PROGRAMMABLE FEATURES
These additional programmable features can be programmed to the CompuStar
system by your authorized CompuStar dealer.
Ignition Lock
Automatic Transmission Vehicle: This programmable option enables your vehicle
to automatically lock the doors upon starting the vehicle with a key. In addition,
the vehicle will automatically unlock the doors upon pulling the key out from the
ignition. This option must be chosen at the time of installation.
Manual Transmission Vehicle or Turbo Mode: This programmable option will
locks the doors in 5 seconds after starting the vehicle with a key and the
emergency brake is released.
Auto Arming
You can turn this function on or off by pressing Button I for 2 seconds.
When set to Auto arming, your security system will arm automatically after all the
car doors are closed, your remote is away from the vehicle by more than 50 to
100 ft and 15 seconds have passed since the last Auto Disarm. Your system
will disarm automatically if your remote comes within 50 to 100 ft radius from the
vehicle. You have an option for Auto Arming without Auto Lock by option
programming. Consult your installer for this programming. Please read the next
paragraph for the interaction between Auto Arming and Passive Arming.
Passive Arming
You can turn this function on or off by pressing Buttons (II+III) for a ½ second.
When set to passive arming, your security system will arm automatically 30
seconds after all the car doors are closed. There are two types of passive arming
that can be programmed by your CompuStar dealership: (1) passive arming with
passive lock and (2) passive arming with active lock.
© 2001 Firstech, Inc. Page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Passive locking means the door will lock when the system passively arms. In the
default factory setting, the system is armed and locked actively, which means the
system will only arm/lock when the remote-pager is utilized.
Note:
1. If you select both Auto Arming and Passive Arming, Auto
Arming takes priority over Passive Arming.
2. If you select Passive Arming with Active Lock in the
programming option, you are also selecting Auto Arming
without Auto Lock. Consult your installer.
Turbo Mode
If this optional Turbo Mode has been programmed at the time of installation,
you can turn this feature on and off by pressing Buttons (III+IV) for a ½ second.
Under this mode, engine continues running for 2 minutes after key has been
taken out from the ignition if emergency brake was on when the key is taken out.
To utilize this mode, the emergency brake sensing wire has to be connected to
the emergency brake wire of the vehicle. Consult the authorized dealer for this
mode.
OPTIONAL INSTALLATION FEATURES
The CompuStar 2WSSR remote-pager has additional features and expansion
possibilities that require additional parts and labor.
Cold Start Mode
If the optional temperature sensor has been installed, Timer Start Mode
becomes Cold Start Mode. Under this mode, your car automatically starts if the
temperature of the inside of the vehicle goes below the preset temperature. The
minimum interval between the starts will be 1.5 or 3.0 hours depending on preset
options during the time of installation. Cold Start Mode is activated or deactivated
by pressing Buttons (II+IV) for a ½ second.
© 2001 Firstech, Inc. Page 14
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Auxiliary 1 & Auxiliary 2
The auxiliary system is an optional car feature that can be tailored for your
vehicle by your local authorized CompuStar dealership. For example, you can
customize your car to have remote power control of your windows, radio, and
sunroof in addition to the rooftop on your convertible car.
Limited Lifetime Consumer Warranty
Firstech, Inc Warrants to the original purchaser that this product shall be free of
defects in material and workmanship under normal use and circumstances for the
period of time that the original owner of this product owns the vehicle in which it is
installed; except that the remote controller unit for the period of one year from the
date of installation to the original owner of this product. When the original
purchaser returns the product to the retail store where it was purchased or pre-
paid postal to Firstech, Inc., 801 E. 82end Ave Suite 1 Anchorage, Alaska 99518,
USA within the warranty period, and if the product is defective, Firstech, Inc, will
at its option repair or replace such.
TO THE MAXIMUM EXTENT ALLOWED BY LAW, ANY AND ALL
WARRANTIES ARE EXCLUDED BY THE MANUFACTURER AND EACH
ENTITY PARTICIPATING IN THE STREAM OF COMMERCE THEREWITH.
THIS EXCLUSION INCLUDES BUT IS NOT LIMITED TO, THE EXCLUSION OF
ANY AND ALL WARRANTY OF MERCHANTABILITY AND/OR ANY AND ALL
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND/OR ANY AND
ALL WARRANTY OF NON-INFRINGEMENT OR PATENTS, IN THE UNITED
STATES OF AMERICA AND/OR ABROAD. NEITHER THE MANUFACTURER
OF ANY ENTITIES CONNECTED THEREWITH SHALL BE RESPONSIBLE OR
LIABLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED
TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES
FOR LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF
ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE
ABOVE, MANUFACTURER DOES OFFER A LIMITED WARRANTY TO
REPLACE OR REPAIR THE CONTROL MODULE AS DESCRIBED ABOVE.
Some states do not allow limitations on how long an implied warranty will last or
the exclusion or limitation on how long an implied warranty will last or the
exclusion or limitation of incidental or consequential damages. This warranty
gives you specific legal rights, and you may also have other rights, which vary
State to State.
© 2001 Firstech, Inc. Page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Firstech, Inc. is not RESPONSIBLE OR LIABLE FOR ANY DAMAGES
WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL
DAMAGES, INCIDENTAL DAMAGES, DAMAGES FOR LOSS OF TIME, LOSS
OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECOMONIC OPPORTUNITY
AND THE LIKE that may or may not resulted from the operation of Compustar.
NOTHWITHSTANDING THE ABOVE, MANUFACTURER DOES OFFER A
LIMITED WARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE AS
DESCRIBED ABOVE.
Your Warranty
The product’s warranty is automatically void if its date code or serial number is
defaced, missing or altered. This warranty will not be valid unless you have
completed the registration card and mailed it to Firstech, Inc., within 10 days after
the purchase to the address listed on the registration card.
© 2001 Firstech, Inc. Page 16
Download from Www.Somanuals.com. All Manuals Search And Download.
|