Clarion CD Player DXZ938R User Manual

Owner’s manual / Mode d’emploi

Bedienungsanleitung / Istruzioni per l’uso

Gebruiksaanwijzing / Manual de instrucciones

Bruksanvisning / Manual de instruções

DXZ938R

HIGH END RDS-EON AM/FM RADIO CD-PLAYER

COMBINATION

•

COMBINE RADIO AM/FM RDS-EON-LECTEUR CD HAUT

DE GAMME

•

VIELSEITIGE RDS-EON AM/UKW-CD-SPIELER-

KOMBINATION

•

COMBINAZIONE DI RADIO RDS-EON AM/FM DI ALTO

LIVELLO E LETTORE CD

•

HOOGWAARDIGE RDS-EON AM/FM RADIO CD-SPELER

COMBINATIE

•

COMBINACIÓN DE RADIO DE RDS-EONY AM/FMY

REPRODUCTOR DE DISCOS COMPACTOS

•

KOMBINERAD RDS-EON AM/FM-RADIO OCH

CD-SPELARE I TOPPKLASS

•

COMBINAÇÃO DE LEITOR DE CDs E RÁDIO RDS-EON

AM/FM DE ALTA GAMA CARACTERÍSTICAS

EON

Download from Www.Somanuals.com. All Manuals Search And Download.

Thank you for purchasing this Clarion product.

Please read this owner’s manual in its entirety before operating this equipment.

After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).

Check the contents of the enclosed warranty card and keep it carefully with this manual.

This manual includes the operating procedures of the CD changer, MD changer, AUX, DAB, DSP,

DVD, PHONE MUTE and TV tuner connected via the CeNET cable. The CD changer, MD changer

and TV tuner have their own manuals, but no explanations for operating them are described.

CAUTIONS:

OBS!

This appliance contains a laser system and

is classified as a “CLASS 1 LASER

Apparaten innehåller laserkomponenten

som avger laserstrålning överstigande

gränsen för laserklass 1.

PRODUCT”. To use this model properly,

read this Owner’s Manual carefully and keep

this manual for your future reference. In

case of any trouble with this player, please

contact your nearest “AUTHORIZED service

station”. To prevent direct exposure to the

laser beam, do not try to open the enclosure.

VAROITUS

Suojakoteloa si saa avata. Laite sisältää

laserdiodin, joka lähettää näkymätöntä

silmille vaarallista lasersäteilyä.

!CAUTION

MODEL

USE OF CONTROLS OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES OTHER

THAN THOSE SPECIFIED IN THE OWNER’S

MANUAL MAY RESULT IN HAZARDOUS

RADIATION EXPOSURE.

ADVARSEL.

Denne mærking er anbragt udvendigt på

apparatet og indikerer, at apparatet arbejder

med laserstråler af klasse 1, hvilket betyder,

at der anvendes laserstråler af svageste

klasse, og at man ikke på apparatets

yderside kan blive udsat for utilladelig

kraftig stråling.

APPARATET BØR KUN ÅBNES AF

FAGFOLK MED SÆRLIGT KENDSKAB TIL

APPARATER MED LASERSTRÅLER!

Indvendigt i apparatet er anbragt den her

gengivne advarselsmækning, som advarer

imod at foretage sådanne indgreb i

apparatet, at man kan komme til at udsaætte

sig for laserstråling.

^DXZ938RDownload from Www.Somanuals.com. All Manuals Search And Download.

Display Items

Contents

1. For safety’s sake, always close the DUAL AC-

TION before leaving this unit unused for a pro-

longed period or switching OFF the ignition key.

4. After a disc is ejected, the DUAL ACTION

automatically returns to the tilted or closed

state. If there is any obstruction when the

DUAL ACTION tries to close, the safety

mechanism is triggered and the DUAL AC-

TION returns to the open state. If this hap-

pens, remove the obstruction, then press the

[O] button.

1. PRECAUTIONS............................................................................................................................... 3

Dual Action ...................................................................................................................................... 3

Handling Compact Discs ................................................................................................................. 4

: DAB indication

: Alternative frequency indication

: Regional indication

:Traffic announcement indication

:Traffic programme indication

: Programme type indication

: Information indication

Operation status indication

Titles, PS names, CT(clock),

etc. are displays.

If you switch OFF the ignition key with the

DUAL ACTION tilted, the DUAL ACTION

does not close.

2. CONTROLS..................................................................................................................................... 5

3. NOMENCLATURE .......................................................................................................................... 6

Names of the Buttons and their Functions ...................................................................................... 6

Major button operations when external equipment is connected to this unit ................................... 7

Display Items ................................................................................................................................... 8

LCD Screen ..................................................................................................................................... 8

2. Before the DUAL ACTION closes, there may

be a braking sound from the safety mecha-

nism. This is normal.

5. To avoid scratching the compact disk, keep

the 12 or 8 cm CD level when inserting or re-

moving them.

: Mute indication

3. If you move the DUAL ACTION by hand, this

may create play. To correct this play, with the

power on for the unit, press the [O] button to

close the DUAL ACTION.

4. DCP ................................................................................................................................................. 9

5. REMOTE CONTROL ..................................................................................................................... 10

Names of Parts .............................................................................................................................. 10

Functions of Remote Control Unit Buttons .................................................................................... 10

Loading Batteries........................................................................................................................... 10

Attaching the Remote Control Unit to the Steering Wheel............................................................. 11

Handling Compact Discs

6. OPERATIONS ............................................................................................................................... 12

Basic Operations ........................................................................................................................... 12

AC-Processor II Operations ........................................................................................................... 14

Radio Operations ........................................................................................................................... 17

RDS Operations............................................................................................................................. 18

CD Operations ............................................................................................................................... 21

Operations Common to Each Mode .............................................................................................. 23

back out of the CD player or it may damage

the CD player.

Use only compact discs bearing the

mark.

• Do not use compact discs that have large

scratches, are misshapen, cracked, etc. Use

of such discs may cause misoperation or

damage.

Do not play heart-shaped, octagonal, or other

specially shaped compact discs.

: Stereo indication

Some CDs recorded in CD-R mode may not be

usable.

Anti-theft

indication

: Manual indication

7. OPERATIONS OF ACCESSORIES .............................................................................................. 27

CD/MD/DVD Changer Operations ................................................................................................. 27

TV Operations................................................................................................................................ 29

Digital Radio/DAB Operations ....................................................................................................... 30

DVD Deck Operations .................................................................................................................... 33

• To remove a compact disc from its storage

case, press down on the center of the case

and lift the disc out, holding it carefully by the

edges.

Even when recorded in CD-R/W mode, some

CDs not be usable.

Function mode indication

The names of modes being

selected,etc.are displayed.

• Do not use commercially available CD protec-

tion sheets or discs equipped with stabilizers,

etc. These may damage the disc or cause

breakdown of the internal mechanism.

:Disc indication

Handling

8. IN CASE OF DIFFICULTY ............................................................................................................ 34

9. ERROR DISPLAYS ....................................................................................................................... 35

10. SPECIFICATIONS ....................................................................................................................... 302

Preset channel indication (1 to 6)

Disc number indication (1 to 12)

• Compared to ordinary music CDs, CD-R and

CD-RW discs are both easily affected by high

temperature and humidity and some of CD-R

and CD-RW discs may not be played.

:Scan indication

:Repeat indication

:Random indication

: Music mode indication

: Matrix mode indication

Storage

Therefore, do not leave them for a long time in

the car.

• Do not expose compact discs to direct sun-

light or any heat source.

• New discs may have some roughness around

the edges. If such discs are used, the player

may not work or the sound may skip. Use a

ball-point pen or the like to remove any rough-

ness from the edge of the disc.

: Movie mode indication (indicate within DTS/DOLBY DIGITAL)

• Do not expose compact discs to excess hu-

midity or dust.

1. PRECAUTIONS

1. This unit is applicable for on-road 4 wheel

vehicle purpose only. Use for tractor, fork

truck, bulldozer, off road vehicle, 2 or 3 wheel

motor bicycle, marine boat or other special

purpose vehicle is not appropriate.

:Virtual mode indication (indicate within DTS/DOLBY DIGITAL)

:VSE indication (VSE:Virtual Space Enhancer)

• Do not expose compact discs to direct heat

from heaters.

INFORMATION FOR USERS:.

CHANGES OR MODIFICATIONS TO THIS

PRODUCT NOT APPROVED BY THE MANU-

FACTURER WILL VOID THE WARRANTY.

: Parametric Equalizer indication

: Auto volume indication

• Never stick

Ball-point pen

Cleaning

• To remove fingermarks and dust, use a soft

cloth and wipe in a straight line from the cen-

ter of the compact disc to the circumference.

labels on the

surface of the

compact disc or

mark the surface

Roughness

: Dolby Pro Logic indication

2. When the inside of the car is very cold and

the player is used soon after switching on the

heater moisture may form on the disc or the

optical parts of the player and proper play-

back may not be possible. If moisture forms

on the disc, wipe it off with a soft cloth. If

moisture forms on the optical parts of the

player, do not use the player for about one

hour. The condensation will disappear natu-

rally allowing normal operation.

Dual Action

This unit uses dual action to make large-screen

displays possible.

: DTS indication (indicate within DTS/DOLBY DIGITAL)

with a pencil or pen.

• Do not use any solvents, such as commer-

cially available cleaners, anti-static spray, or

thinner to clean compact discs.

• Never play a compact

disc with any cellophane

tape or other glue on it or

with peeling off marks. If you try to play such a

compact disc, you may not be able to get it

• After using special compact disc cleaner, let

the compact disc dry off well before playing it.

When you use the dual action, be sure to close it.

CAUTION

BE CAREFUL NOT TO GETYOUR FINGERS

CAUGHT WHEN OPENING AND CLOSING

THE DUAL ACTION.

LCD Screen

Be sure to unfold and read the next page. / Veuillez déplier et vous référer à la page suivante.

Bitte ausbreiten und die nächste Seite lesen. / Assicurarsi di aprire e leggere la pagina successiva.

Volgende pagina uitvouwen en doorlezen a.u.b. / Cerciórese de desplegar y de leer la página siguiente.

Glöm inte att vika ut och läsa nästa sida. / Não deixe de abrir e ler a próxima página.

In extreme cold, the screen movement may slow down and the screen may darken, but this is normal.

The screen will recover when it returns to normal temperature.

3. Driving on extremely bumpy roads which cause

severe vibration may cause the sound to skip.

DXZ938R

Download from Www.Somanuals.com. All Manuals Search And Download.

Major button operations when external equipment is

connected to this unit

CONTROLS / LES COMMANDES / REGLER / CONTROLLI

REGELAARS / CONTROLES / KONTROLLER / CONTROLOS

3. NOMENCLATURE

Note:

[TA] button

• Use the button to set the TA (Traffic An-

nouncement) standby mode in the DAB mode.

(This function is only DAB tuner.)

●When the CD/MD/DVD changer

is connected

For details, see the section “CD/MD/DVD

• Be sure to read this chapter referring to the front diagrams of chapter “2. CONTROLS” on page 5 (unfold).

Names of the Buttons and their Functions

Main unit / Appareil principal / Hauptgerät / Apparecchio principale

Hoofdtoestel / Unidad principal / Huvudenhet / Unidade principal

changer operations”. For the DVD

changer, refer to the Owner’s Manual pro-

vided with the DVD changer.

[AF] button

[RELEASE] button

• Deeply press the button to remove the DCP.

[P/A] button

•

Press the button to turn on or off the AF (Alter-

native Frequency) function in the DAB mode.

(This function is only DAB tuner.)

• Performs preset scan while in the radio mode.

When the button is pressed and held, auto

store is performed.

[

]

[

]

FNC

VSE

[

] button

[VSE] button

Press to enter VSE mode or the Position mode.

• Plays or pauses a CD, MD or DVD.

[

]

[

]

RELEASE

•

[P/A] button

• Performs scan play for 10 seconds for each

track while in the CD mode.

[DISP] button

• Switches CT or select disc titles mode.

•

When the button is pressed and hold for 1 sec-

ond or longer, the mode is turned on or off.

• Performs preset scan while in the radio mode.

When the button is pressed and held, auto

store is performed. (This function is only TV

tuner.)

[

]

[BND] button

• Switches the band, or seek tuning or manual

• When the button is pressed and held,

switches the disc titles or track titles while in

the MD changer mode.

[EQ] button

• Press to enter the EQ mode.

]

DISP

tuning while in the radio mode.

[

]

A-M

[BND] button

• Switches the band.

•

When the button is pressed and hold for 1 sec-

ond or longer, the mode is turned on or off.

• Plays a first track while in the CD mode.

• When the button is pressed and held,

switches the user titles or track titles ,etc.while

in the CD changer mode.

[

]

PTY

[TITLE] button

• Use the button to input a title in the CD mode.

• When the button is pressed and held,

switches seek tuning or manual mode.

[FNC] button

• Press the button to turn on the power.

Press and hold the button for 1second or

longer to turn off the power.

[

]

[PTY] button

• Performs random play. Also performs disc ran-

dom play when the button is pressed and held

[

]

P/A

[

]

DIRECT

• Press and hold the button for 1 second or

longer to enter the adjust mode.

[a], [d] button

[ ]

[

]

ROTALY

[

]

[

]

BND

TITLE

• Selects a station.

[DIRECT] button

[a], [d] button

• Switches the operation mode among the ra-

dio mode, etc.

[AF] button

•

Stores a station into memory or recall it directly.

• Selects a station while in the radio mode or

selects a track when listening to a CD. These

buttons are used to make various settings.

•

Performs repeat play. When this button is

With the DUAL ACTION opened / Lorsque la Double action est ouverte

SCHRÄGKONSOLE geöffnet / Con la DOPPIA AZIONE aperta

Met het DUAL ACTION bedieningspaneel geopend / Con el panel frontal de acción doble abierto

Med den nedfällbara panelen öppen / Com o painel de DUPLA ACÇÃO aberto

pressed and held, disc repeat play is performed.

[

] button

●When the DTS/DOLBY DIGITAL

is connected

For details, see the owner’s manual of the

DTS/DOLBY DIGITAL.

• Plays or pauses a CD while in the CD mode.

[P/A] button

[ROTARY] knob

• Adjust the volume by turning the knob clock-

• Performs scan play for 10 seconds for each

track. Disc scan play is performed when the

button is pressed and held.

• Used as “Enter button” while the unit is in

the ADJ mode.

wise or counterclockwise.

[O] button

• Use the button to open the dual action.

• Use the knob to perform various settings.

[VSE] button

• Press the button to turn on the DSF.

[BND] button

• Plays a first track.

[

] BUTTON

[

] BUTTON

CD EJECT

RESET

[

]

CD SLOT

[PLII] button

• Press to select Dolby Pro Logic II mode.

[DISP] button

• Switches the display indication(Main

• After DSF is selected, press and hold the

[VSE] button for 1 second or longer to turn to

off DSF effect.

• Used as “disc up button” while the unit is in

the DVD changer mode.

[DIRECT] button

display,clock display).

[TITLE] button

• Use the button to input a title in the CD

changer mode.

• Stores a station into memory or recall it di-

After DSF is selected, press the [BND] button

and then the [DIRECT] button to select the

DSF menu.

[A-M] button

rectly while in the radio mode.

•

Use the button to switch to the audio mode (bal-

ance/fader/sub.w/center SP/NF. adjustment)

[CD SLOT]

•

Use the button to scroll the title during CD-text play

or MD changer play in the CD changer mode.

• CD insertion slot.

[PLII] button

[PTY] button

• Use the button to set the PTY (Programme

[CD EJECT] button

• Press the button to turn on the PLII, and each

time to press PLII mode changes following or-

der:

[a], [d] button

• Press to eject a CD loaded in the unit.

Type) standby mode or PTY items.

• Selects a track when listening to a disc.

• Press to open the CD slot and insert a CD.

• Performs random play while in the CD mode.

[DIRECT] button

• Designates the disc to be played.

Music mode ➜ Matrix mode ➜ Movie mode

➜ Virtual mode ➜ mode off

[RESET] button

[TA] button

• Press to reset the system.

• Use the button to set the TA (Traffic An-

●When theTV/DAB is connected

nouncement) standby mode.

Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.

Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.

Hinweis: Bitte diese Seite ausfalten und beim Lesen der einzelnen Kapitel die Frontdiagramme beachten.

Nota: Assicurarsi di aprire questa pagina e fare riferimento a questi diagrammi quando si legge ciascun capitolo.

Opmerking: Vouw deze pagina uit en zie tevens de afbeeldingen van het voorpaneel tijdens het doorlezen van de volgende hoofdstukken.

For details, see the section “TV opera-

tions” or “DAB operations”.

[AF] button

• Press the button to turn on or off the AF (Al-

ternative Frequency) function.

[PTY] button

• Plays repeatedly while in the CD mode.

Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.

Observera: Vik ut denna sida för att kunna se figurerna över bilstereons framsida medan du läser de olika kapitlen.

Nota: Certifique-se de abrir esta página e consulte os diagramas frontais conforme realiza a leitura de cada capítulo.

•

Use the button to set the PTY (Programme Type)

• When the button is pressed and held,

Reginal function can select ON or OFF.

standby mode or PTY items in the DAB mode.

•

Switches the TV picture mode or VTR (external)

picture mode.

DXZ938R

Download from Www.Somanuals.com. All Manuals Search And Download.

4. DCP

The control panel can be detached to prevent

theft. When detaching the control panel, store it

in the DCP (DETACHABLE CONTROL PANEL)

case to prevent scratches.

CAUTION

• Always close the DUAL ACTION before remov-

ing the DCP.

• If you remove the DCP with the DUAL ACTION

open, the sloping console closes immediately.

Be careful not to get your fingers caught.

We recommend taking the DCP with you when

leaving the car.

• The DCP can easily be damaged by shocks.

After removing it, be careful not to drop it or

subject it to strong shocks.

Removing the DCP

1. With the DUAL ACTION closed, turn off the

power.

• If the [RELEASE] button is pressed and the

DCP is not locked into place, it may fall out

from vibration of the car.This can break the

DCP, so after removing it, either install it on

the unit or put it in its DCP case.

2. Press the [RELEASE] button deeply and

take and pull the DCP to detach the DCP.

• The connector connecting the unit and the

DCP is an extremely important part. Be careful

not to damage it by pressing on it with finger-

nails, screwdrivers, etc.

• If you apply to the control panel more force

than that required with the control panel left

open, the control panel will go down one step.

This is due to safety mechanism engaged and

is not a malfunction. In this case, press the [O]

button two times to return the control panel to

the original operating position. Using the con-

trol panel being lowered results in a damage

to the panel.

Attaching the DCP

1. Insert the DCP so that the A section on the

right side of the DCP catches on the hook B

on the unit.

• Do not use the control panel being left open

as a tray to put an object on.

•

Moving the control panel manually will cause a

malfunction such as getting out of order of the

sloping mechanism, breakdown of the gears,

etc. Do not draw the control panel forcibly.

When the control panel is moved manually,

press the [O] button several times to see if the

control panel returns to the normal position

and functions properly.

• Do not remove the DCP while you are driving

a car.

2. Press the left side C of the DCP carefully to

fit it in place.

• Do not use the DCP being rickety.

• Do not carry the DCP in a trouser pocket or

the like directly. (The DCP may be damaged

under load conditions.)

• The DCP may jump out of the DCP case hous-

ing the DCP when the case is opened ener-

getically.

Note:

• If the DCP is dirty, wipe off the dirt with a soft, dry

cloth only.

DXZ938R

Download from Www.Somanuals.com. All Manuals Search And Download.

5. REMOTE CONTROL

Names of Parts

Joystick

wz Volume control

ad Search

BND (Band) button

FNC (function)

Top button

Disc Up button

Program button

BND

Functions of Remote Control Unit Buttons

Mode

Button

Radio

(DAB) (RDS)

CD/MD changer

DVD changer

Switches among radio, DAB, CD, DVD deck, CD/MD changer, DVD changer, TV, and AUX.

[FUNC]

Plays the first track.

Top play.

Moves the next disc

in increasing order.

Switches reception

band.

Switches reception

band.

[BAND]

Increases and decreases volume (in all modes).

[

] , [

]

Moves preset

channels up and

down.

Moves tracks up and down.

When pressed and held for 1 second:

Fast-forward/fast-backward.

Moves preset

channels up and

down.

Some of the corresponding buttons on the main unit and remote control unit have different functions.

Loading Batteries

1. Open the battery cover.

Battery cover

2. Insert the supplied lithium battery (CR2032) with the plus + symbol facing up and close the battery

cover.

Lithium battery

DXZ938R

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes:

Using batteries improperly can cause them to explode. Take note of the following points:

• Do not short-circuit, disassemble or heat batteries.

• Do not dispose of batteries into fire or flames.

• Dispose of spent batteries properly.

Attaching the Remote Control Unit to the Steering Wheel

1. Attach the holder to the steering wheel.

The diagrams below show how to install the remote control unit on the steering wheel of a car with

the steering wheel on the Left. Install the remote control unit on the Left in a car with the steering

wheel on the right side.

Attachment to a left hand drive car

Attachment to a right hand drive car

Holder

2. Installing the steering wheel remote control unit

Attachment to a left hand drive car

Attachment to a right hand drive car

Steering wheel remote control unit

Holder

Screw with washer (2.6 ✕ 5)

Attachment to a left hand drive car

Attachment to a right hand drive car

Align

Steering wheel remote control unit

Holder

Clearance

Note:

The location to be chosen for the remote control unit depends on the configuration of the steering wheel.

Make sure that the installation of the remote control unit does not prevent normal driving and that the remote

control signal reaches the remote control sensor.

DXZ938R

Download from Www.Somanuals.com. All Manuals Search And Download.

6. OPERATIONS

Note:Be sure to read this chapter referring to the front diagrams of

Basic Operations

chapter “2. CONTROLS” on page 5 (unfold).

Adjusting the volume

Turning the [ROTARY] knob clockwise increases

the volume; turning it counterclockwise de-

CAUTION

Be sure to lower the volume before switch-

ing off the unit power or the ignition key.The

unit remembers its last volume setting. If you

switch the power off with the volume up,

when you switch the power back on, the sud-

den loud volume may hurt your hearing and

damage the unit.

creases the volume.

The volume level is from 0 (minimum) to 33 (maxi-

mum).

Switching the display

Press the [DISP] button to select the desired display.

Each time you press the [DISP] button, the dis-

play switches:

Turning on/off the power

Note:

Once selected, the preferred display becomes the

display default. When a function adjustment such

as volume is made, the screen will momentarily

switch to that function’s display, then revert back to

the preferred display several seconds after the ad-

justment.

• Be careful about using this unit for a long time

without running the engine. If you drain the car’s

battery too far, you may not be able to start the

engine and this can reduce the service life of the

battery.

1. Press the [FNC] button.

When you have entered a title in a CD/MD, it ap-

pears in the main display. If you have not entered a

title, “D NO-TITLE” or “T NO-TITLE” appears in

the title display instead. For information on how to

enter a title, refer to the subsection“Entering titles”

in section “Operations Common to Each Mode ”.

2. The illumination and display on the unit light

up. The unit automatically remembers its last

operation mode and will automatically switch

to display that mode.

3. Press and hold the [FNC] button for 1 second

When CT data is not received, “CT––:––” appears

in the display.

or longer to turn off the power for the unit.

Note:

• System check

Adjusting the balance

1. Press the [A-M] button and select “BAL-

ANCE”.

The first time this unit is turned on after the wire

connections are completed, it must be checked

what equipment is connected. When the power is

turned on, “SYSTEM CHCK” and “PUSH

POWER” appear in the display alternately, so

press the [FNC] button. The system check starts

within the unit. When the system check is com-

plete, the power is turned off, so press the [FNC]

button again.

2. Turning the [ROTARY] knob clockwise em-

phasizes the sound from the right speaker;

turning it counterclockwise emphasizes the

sound from the left speaker.

The factory default setting is “0”. (Adjustment

range: L13 to R13)

Selecting a mode

1. Press the [FNC] button to change the opera-

tion mode.

3. When the adjustment is complete, press the

[A-M] button several times until the function

mode is reached.

2. Each time you press the [FNC] button, the

operation mode changes in the following or-

der:

Adjusting the fader

1. Press the [A-M] button and select “FADER”.

Radio mode ➜ DAB mode ➜ CD mode ➜

DVD DECK mode ➜ CD changer mode ➜

MD changer mode ➜ DVD changer mode ➜

TV mode ➜ AUX mode ➜ Radio mode...

External equipment not connected with

CeNET is not displayed.

2. Turning the [ROTARY] knob clockwise em-

phasizes the sound from the front speakers;

turning it counterclockwise emphasizes the

sound from the rear speakers.

The factory default setting is “0”. (Adjustment

range: F12 to R12)

DXZ938R

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Operations

Note:

3. When the adjustment is complete, press the

[A-M] button several times until the function

mode is reached.

• When CTR + SW are chosen, audio output from

CTR is not available except in the PL II mode.

Center Speaker and Sub Woofer On / Off

Select PLII Mode on and SP setting to

“CTR+SW” mode

Operation BASS/TREB

1. Press the “BASS/TREB” mode. Each time

the [EQ] button is pressed, the adjusting item

“BASS” or “TREB” is changed cyclically.

1. Press and hold the [TITLE] button for 1 sec-

ond or longer.

2. Turn the [ROTARY] knob clockwise or coun-

terclockwise to adjust “BAS/TREB”.

2. Press the [a] or [d] button to select the

“SP SEL”.

3. Press the [EQ] button to return to the previ-

ous mode.

3. Press the [

] button to adjust the “CTR-

The Adjustment range is from -6dB to +6dB

for bass and treb.

SP” “SUB W”.

4. Turn the [ROTARY] knob clockwise or coun-

terclockwise to select “ON” or “OFF”.

This parameter is reflected STD PRO mode

This function is useful for Speaker Setting

Problems.

Speaker Setting

You can set up your favorite sound environment

using “Dolby Surround Pro logic II” or “AC-

Processor II” so that you can enjoy a dynamic

sound of 5.1 ch surround or 4ch + 2ch speaker.

Filter Adjustment

1. Select Dolby Pro Logic II or AC-ProII mode

and press and hold the [TITLE] button for 1

second or longer.

●Dolby Pro Logic II 5.1ch surround

Center SP +Front L.R. +Surround L.R. +Sub

Woofer.

2. Press the [a] or [d] button to select the

“FILTER”.

To make the most of the sound field reproduc-

tion of Dolby Pro Logic II, a speaker system of

5.1 channel is recommendable. It has been also

designed so that a sound filed effect almost as

good as that of 5.1 channel reproduction can be

obtained even by a constitution of 4 channel + 1

channel (subwoofer).

3. Press the [

] button to adjust the “SUB-W

LPF” or “HPF”.

4. Turn the [ROTARY] knob clockwise or coun-

terclockwise to adjust filter frequency.

Sub Woofer Low Pass Filter Adjustment

Range is 50, 80, 120Hz (18dB/oct), OFF.

When PLII mode Sub Woofer Low pass Filter

Adjustment Range is 50, 80, 120Hz (12dB/

oct.), OFF.

If you using Dolby Pro Logic source and your

speaker is only four Front L.R. + Surround L.R.,

speaker setting will be better to CTR+SW and

CTR OFF, so Center channel divided to Front

L.R. automatically.

High Pass Filter adjustment Range is 50, 80,

120Hz(12dB/oct), thrgh.

Note:

Note

• High pass filter adjustment is available for Front

2ch and Rear 2ch only AC-ProII PRO Mode.

• When SW-L + SW-R are chosen, audio output

from SW-L is not available in the PL II mode.

●AC- Processor II

CT (Clock Time) function

Front L.R. + Rear L.R.+ Sub Woofer L.R. (4ch +

2ch)

The CT function receives CT data sent from an

RDS station and displays the time. Press the

[DISP] button to switch to the CT display.

To make the most of the sound field reproduc-

tion of AC-Processor II, a speaker system of 4

channel + 2 channel is recommendable.

If a CT data is not being received, “CT––:––” ap-

pears in the display.

1. Press and hold the [TITLE] button for 1 sec-

ond or longer and enter “ADJ” mode.

Note:

• CT data is not transmitted in some countries and

by some broadcast stations. Also, in some areas,

the CT may not display accurately.

2. Press the [a] or [d] button to select the

“SP-SETTING”.

3. Turn the [ROTARY] knob clockwise or coun-

terclockwise to select “SW L+SW R” or “CTR

+SW” mode.

DXZ938R

Download from Www.Somanuals.com. All Manuals Search And Download.

AC-Processor II Operation

Adjusting Dolby Pro Logic II Operation

1. Select Dolby Pro Logic II mode and press

and hold the [TITLE] button for 1 second or

longer to enter “ADJ” mode.

Dolby Pro Logic II

Dolby Pro Logic II is a matrix decoding technol-

ogy in which the updated digital matrix technol-

ogy is applied and Dolby Pro Logic is further im-

proved. It realizes excellent 5.1 channel repro-

duction of Dolby surround source as well as ste-

reo sound sources such as CDs, thereby caus-

ing a surround channel to be full-ranged (20 Hz

to 20 kHz) and become stereo. Therefore, you

can enjoy any stereo sources with dynamic

sound of 5.1 channel. According to a source to

be reproduced, Music Mode or Matrix Mode can

be selected.

2. Press the [a] or [d] button to select the

“PLII DELAY”.

3. Press the [

] button to adjust the “PLII

DELAY”.

4. Turn the [ROTARY] knob clockwise or coun-

terclockwise to make the adjustment.

The adjustment range of surround speaker de-

lay is from 0m sec. to 15m sec.

The adjustment made in “PLII DELAY” is re-

flected in the each mode.

Manufactured under license from Dolby Laborato-

ries. “Dolby”, “Pro Logic” and the double-D sym-

bol are trademarks of Dolby Laboratories.

Adjusting Music Mode

Use the MUSIC MODE to make more detailed

adjustments.

● Music Mode

This mode is suitable for stereo sources like

CDs. By optimizing frequency characteristics of

the surround channel, a broader and deeper

sound is assured. In addition, since broadness

of the sound field varies with recording condi-

tions of music sources, there is Adjusting Mode

which makes a finer tuning available.

1. Select “Music Mode” and press and hold the

[TITLE] button for 1 second or longer.

2. Press the [a] or [d] button to select the

“PLII CONT”.

3. Press the [

] button to adjust the “PLII

● Matrix Mode

CONT” detail items.

This mode is suitable for AM/FM radio.

4. Press the [a] or [d] button to select the

items.

Selection and switching of the

5. Turn the [ROTARY] knob clockwise or coun-

terclockwise to make the adjustment.

Dolby Pro Logic II effect

While the “Dolby PLII” indication is lit in the dis-

play, the “Dolby PLII” effect is set to “On”.

The detailed adjustments depend on each of

the adjustment items.There are 3 items:

“PANORAMA”, “DIMENSION”, and “CTR

WIDTH”.

1. Setting the speaker 5.1ch ( For detail, see the

section Basic Operation - Speaker setting).

PANORAMA (Y or N):

2. Press the [PLII] button so that PLII mode is

turned on. Each time the button is pressed,

the mode changes as follows: “MUSIC

MODE” ➜ ”MATRIX MODE” ➜ ”PLII OFF

MODE” ➜ ”MUSIC MODE”

Selecting PANORAMA mode will extend the

front sound field image to the rear. If sur-

round effect does not seem to be presented

sufficiently, select the setting position “Y”.

DIMENSION (0 to 6):

3. Select the “PLII OFF MODE” to turn off the

Dolby Pro Logic II effect. Also press the

[VSE] button or [EQ] button to turn off the

Dolby Pro II.

Selecting DIMENSION mode will shift the

sound field image to the front or the rear. If

the balance of the sound field image is too

much pulled towards the front or rear, the

balance front/rear can be corrected The ad-

justing value 3 is the center position. The

range of 3 to 0 shifts the balance front/rear to

the front. The range of 3 to 6 shifts the bal-

ance front/rear to the rear.

CTR WIDTH (0 to 7):

Selecting CTR WIDTH mode will adjust the

localization of the center channel between

the center speaker and the front speaker L/R.

DXZ938R

Download from Www.Somanuals.com. All Manuals Search And Download.

AC-Processor II Operation

Distributing the center channel sound to the

right and left will increase the integrated

sound field image, providing you with an

natural spatial feeling of sound.

Adjusting AC-PII STD

AC-PII STD makes natural stereo feeling for ev-

ery seat by virtual space enhancer.

VSE, which is room simulation, can correct the

sound pressure inside the car so that the uni-

form sound effect is obtained at any seats.

Setting to the value 0 will produce the center

sound with the center speaker.

Setting to the value 7 will distribute the cen-

ter sound to the front speaker L/R as the ex-

isting stereo sound does.

1. Select “VSE” menu which you want to edit on

the basis of.

2. Press and hold the [TITLE] button for 1 sec-

ond or longer.

AC-Processor II Operation

There are 2 modes “STD” (standard) and “PRO”

(professional) in the AC-ProII.

1. Setting the speaker to 4ch+2ch (For details,

refer to the subsection “Speaker Setting” in

the section “Basic Operations”).

3. Press the [a] or [d] button to select item

to be adjusted.

There are “DIFFUSE” “CAR WIDTH” and “CAR

LENG” available for the items to be adjusted.

DIFFUSE

(Adjusts the correction

deviation of broadness)

2. Turn off the PLII mode.

CAR WIDTH (Adjusts the correction

deviation of width inside

the car)

3. Press and hold the [TITLE] button for 1 sec-

ond or longer and enter “ADJ” mode.

4. Press the [a] or [d] button to select the

“AC-PII SEL”.

CAR LENG (Adjusts the correction

deviation of length inside

the car)

5. Press the [

] button to select AC-ProII

mode from “STD” or “PRO”.

4. Turn the [ROTARY] knob clockwise or coun-

terclockwise to make the adjustment.

6. Turn the [ROTARY] knob clockwise or coun-

terclockwise to select “STD” or “PRO”.

The adjustment range is from 1 to 10 for

each item.

7. Press the [TITLE] button to the previous

mode.

5. Press and hold the [DIRECT] buttons for 2

seconds or longer to store the edited con-

tents.

Operation AC-PII STD

1. Press the [VSE] button to enter VSE mode.

You can give a title to user memory. For the in-

putting method of titles, refer to the subsection

“Entering titles” in section “Operations com-

mon to each mode”.

2. Press the [BND] button to select “VSE BASIC”.

3. Press the [DIRECT] button to select VSE

menu as below.

1. Flat:

original sound, flat equalizing

Operation AC-PII PRO

Arrival time of sound from the speaker can be

selected from among five types according to the

position of the seat. In addition, Time Alignment

Function enables a pinpoint speaker setting to

obtain a uniform sound effect from speakers to

the listner.

2. Bass boost: deep bass sound empha-

sized

3. High boost: middle and high sound area

emphasized

4. Impact:

low and high sound area em-

phasized

1. Press the [VSE] button to enter POSITION mode.

2. Press the Band button to select “POS BASIC”.

5. Acoustical: middle sound area empha-

sized (human voice)

3. Press the [DIRECT] button to select VSE

6. Smooth:

quiet and graceful feeling

menu as below.

4. Press the [VSE] button to return to the previ-

1.FRONT-L 2.FRONT-R 3.FRONT 4.REAR

5.FULL SEAT

ous mode.

5. Press and hold the [VSE] button for 1 second

or longer so that the VSE effect is turned on

or off.

4. Press the [VSE] button to return to the previ-

ous mode.

DXZ938R

Download from Www.Somanuals.com. All Manuals Search And Download.

AC-Processor II Operation

5. Press and hold the [VSE] button for 1 second

or longer so that the POSITION effect is

turned on or off.

Operation P.EQ

A full range of frequency level can be minutely

corrected with a smooth curve by frequency cor-

rection in accordance with car models. Six kinds

of P.EQ basic menus have been pre-stored in

this unit according to the car models and the

mounting positions of speakers. Thus, set it in

accordance with the car type.

Adjusting AC-PII PRO

1. Select “VSE” menu which you want to edit on

the basis of.

2. Press and hold the [TITLE] button for 1 sec-

1. Press the [EQ] button to enter “P.EQ mode”.

ond or longer.

2. Press the Band button to select “P.EQ BA-

SIC”.

3. Press the [a] or [d] button to select item

to be adjusted.

3. Press the [DIRECT] button to select P.EQ

There are “TIME ALIGN” and “SP GAIN” avail-

able for the items to be adjusted.

menu as below.

1.SEDAN-1 2.SEDAN-2 3.WAGON-1

4.WAGON-2 5.MINI VAN-1 6.MINI VAN-2

4. Press the [

5. Press the [a] or [d] button to select the

channel to be adjusted. Available channels

are:“FRONT-L”, “FRONT-R”, “REAR-L”,

“REAR-R”, “SW-L” and “SW-R”.

4. Press the [EQ] button to return to the previ-

ous mode.

5. Press and hold the [EQ] button for 1 second

or longer so that the P.EQ effect is turned on

or off.

6. Turn the [ROTARY] knob clockwise or coun-

terclockwise to make the adjustment.

The adjustment of “TIME ALIGN” range is

from 0 cm to 500cm.

Adjusting P.EQ

1. Select “P.EQ” menu which you want to edit

on the basis of.

The adjustment of “SP-GAIN” range is from

0db to -20dB for each channel.

2. Press and hold the [TITLE] button for 1 sec-

7. Press and hold the [DIRECT] buttons for 2

seconds or longer to store the edited con-

tents.

ond or longer.

3. Press the [a] or [d] button to select item

to be adjusted.

You can give a title to user memory. For the in-

putting method of titles, refer to the subsection

“Entering titles” in section “Operations com-

mon to each mode”.

There are “FRONT/REAR” ,“BAND” ,“FREQ”

“GAIN” and “Q” available for the items ad-

justed.

4. Press and hold the [DIRECT] buttons for 2

seconds or longer to store the edited con-

tents.

EQ Operation

There are 2 mode for sound EQ “P.EQ” mode

and “BASS/TREB” mode selecting EQUALIZ-

ING mode.

You can give a title to user memory. For the in-

putting method of titles, refer to the subsection

“Entering titles” in section “Operations com-

mon to each mode”.

1. Press and hold the [TITLE] button for 1 sec-

ond or longer and enter “ADJ” mode.

The parameter created in this section is also

effective when the unit is in both the “STD”

and “PRO” mode.

2. Press the [a] or [d] button to select the

“AC-PII SEL”.

3. Press the [

] button to enter AC-PROII

select mode “STD” or “PRO”.

4. Then press the [a] or [d] button to select

the “EQ SEL”.

5. Turn the [ROTARY] knob clockwise or coun-

terclockwise to select “P.EQ” or “BAS/TREB”

mode.

6. Press the [TITLE] button to return to the pre-

vious mode.

Factory default setting is P.EQ

DXZ938R

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio Operations

Listening to the radio

1. Press the [FNC] button and select the radio

mode. The frequency or PS appears in the

display.

Manual tuning

There are 2 ways available: Quick tuning and

step tuning.

When you are in the step tuning mode, the fre-

quency changes one step at a time. In the quick

tuning mode, you can quickly tune the desired

frequency.

PS: Programme service name

2. Press the [BND] button and select the radio

band. Each time the button is pressed, the ra-

dio reception band changes in the following

order:

1. Press the [BND] button and select the de-

sired band (FM or AM (MW/LW)).

FM1 ➜ FM2 ➜ FM3 ➜ AM (MW/LW) ➜ FM1...

If “MANU” is not lit in the display, press and

hold the [BND] button for 1 second or longer.

“MANU” is lit in the display and manual tuning

is now available.

3. Press the [a] or [d] button to tune in the

desired station.

2. Tune into a station.

Tuning

●Quick tuning:

There are 3 types of tuning mode available, seek

tuning, manual tuning and preset tuning.

Press and hold the [a] or [d] button for 1

second or longer to tune in a station.

●Step tuning:

Seek tuning

There are 2 types of seek tuning: DX SEEK and

LOCAL SEEK.

Press the [a] or [d] button to manually

tune in a station.

DX SEEK can automatically tune in to receiv-

able broadcast stations; LOCAL SEEK can tune

in to only broadcast stations with a good recep-

tion sensitivity.

Recalling a preset station

A total of 24 preset positions (6-FM1, 6-FM2, 6-

FM3, 6-AM) exists to store individual radio sta-

tions in memory. Pressing the corresponding

[DIRECT] button recalls the stored radio fre-

quency automatically.

1. Press the [BND] button and select the de-

sired band (FM or AM (MW, LW)).

2. Tune into a station.

1. Press the [BND] button and select the de-

If “MANU” is lit in the display, press and hold

the [BND] button for 1 second or longer.

“MANU” in the display goes off and seek tun-

ing is now available.

sired band (FM or AM (MW/LW)).

2. Press the corresponding [DIRECT] button to

recall the stored station.

Press and hold one of the [DIRECT] buttons

for 2 seconds or longer to store that station

into preset memory.

If “TA” is lit in the display, TP stations are auto-

matically sought.

●DX SEEK

Press the [a] or [d] button to automatically

Manual memory

seek a station.

1. Select the desired station with seek tuning,

manual tuning or preset tuning.

When the [d] button is pressed, the station is

sought in the direction of higher frequencies; if

the [a] button is pressed, the station is sought

in the direction of lower frequencies.

2. Press and hold one of the [DIRECT] buttons

for 2 seconds or longer to store the current

station into preset memory.

When seek tuning starts, “DX SEEK” appears in

the display.

●LOCAL SEEK

If you press and hold the [a] or [d] button for

1 second or longer, local seek tuning is carried

out. Broadcast stations with good reception sen-

sitivity are selected.

When local seeking starts, “LO SEEK” appears in

the display.

DXZ938R

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio Operations

RDS Operations

Auto store

RDS (Radio Data System)

This unit has a built-in RDS decoder system that

supports broadcast stations transmitting RDS data.

Auto store is a function for storing up to 6 sta-

tions that are automatically tuned in sequentially.

If 6 receivable stations cannot be received, a

previously stored station remains unoverwritten

at the memory position.

This system can display the name of the broad-

cast station being received (PS) and can auto-

matically switch to the broadcast station with the

best reception as you move long distances (AF

switching).

1. Press the [BND] button and select the de-

sired band (FM or AM (MW/LW)).

2. Press and hold the [P/A] button for 2 sec-

onds or longer. The stations with good recep-

tion are stored automatically to the preset

channels.

Also, if a traffic announcement or programme

type is broadcast from an RDS station, no matter

what mode you are in, this broadcast is received.

Additionally, if EON information is received, this

information enables automatic switching of other

preset stations on the same network and inter-

ruption of the station being received with traffic

information from other stations (TP). This func-

tion is not available in some areas.

If auto store is performed in the FM bands, the

stations are stored in FM3 even if FM1 or FM2

was chosen for storing stations.

Preset scan

Preset scan receives the stations stored in pre-

set memory in order. This function is useful

when searching for a desired station in memory.

When using the RDS function, always set the

radio to FM mode.

• AF

• PS

: Alternative Frequency

1. Press the [P/A] button.

: Programme Service Name

2. When a desired station is tuned in, press the

[P/A] button again to continue receiving that

station.

• PTY : Programme Type

• EON : Enhanced Other Network

• TP

: Traffic Programme

Note:

RDS interrupt does not function during AM radio

reception or in TV mode.

• Be careful not to press and hold the [P/A] button

for 2 seconds or longer, otherwise the auto store

function is engaged and the unit starts storing

stations.

AF function

The AF function switches to a different fre-

quency on the same network in order to main-

tain optimum reception.

The factory default setting is “ON”.

●Switching OFF the AF function

Press the [AF] button. “AF” in the display goes

off and the AF function turns off.

●Switching ON the AF function

Press the [AF] button. “AF” in the display lights

and the AF function turns on.

If the reception of the current broadcast station de-

teriorates, “PI SEARCH” appears in the display and

the radio searches for the same programme on

another frequency.

●AF function between RDS and DAB

When the same programme is broadcast by

both RDS and DAB, and this function is ON, the

unit switches to receiving the broadcast with the

better reception automatically.

This function only operates when the DAH913 or

DAH9500z DAB unit, sold separately, is connected.

This factory default setting is “ON”.

DXZ938R

Download from Www.Somanuals.com. All Manuals Search And Download.

RDS Operations

TA (Traffic Announcement)

In the TA standby mode, when a traffic announce-

ment broadcast starts, the traffic announcement

broadcast is received as top priority regardless of

the function mode so you can listen to it.Traffic

programme (TP) automatic tuning is also possible.

1. Press and hold the [TITLE] button for 1 sec-

ond or longer to switch to the adjustment se-

lection display.

2. Press the [a] or [d] button to select “LINK

ACT”.

3. Turn the [ROTARY] knob clockwise for “ON”

or counterclockwise for “OFF”.

This function can only be used when “TP” is lit in

the display. When “TP” is lit, this means that the

RDS broadcast station being received has traffic

announcement programmes.

● ON:

AF switching between DAB and RDS enabled.

● OFF:

●Setting the TA standby mode

AF switching between DAB and RDS disabled.

If you press the [TA] button when only “TP” is lit in

the display, “TP” and “TA” light in the display and the

unit is set into the TA standby mode until a traffic an-

nouncement is broadcast.When a traffic announce-

ment broadcast starts, “TRA INFO” appears in the

display. If you press the [TA] button while a traffic an-

nouncement broadcast is being received, the traffic

announcement broadcast reception is cancelled and

the unit goes into the TA standby mode.

4. Press the [TITLE] button to return to the pre-

vious mode.

REG (Regional programme) function

When the REG function is ON, the optimum re-

gional station can be received. When this func-

tion is OFF, if the regional station area switches

as you drive, a regional station for that region is

received.

●Cancelling the TA standby mode

With “TP” and “TA” lit in the display, press the

[TA] button. The “TA” in the display goes off and

the TA standby mode is cancelled.

The factory default setting is “OFF”.

Notes:

• This function is disabled when a national station

such as BBC R2 is being received.

• The REG function ON/OFF setting is valid when

the AF function is ON.

If “TP” is not lit, pressing the [TA] button searches

for a TP station.

●Searching for a TP station

When “TP” is not lit, if you press the [TA] button,

“TA” in the display lights and the unit automati-

cally receives a TP station.

●Switching the REG function ON

Press and hold the [AF] button for 1 second or

longer.

Note:

“REG” in the display lights and the REG function

turns on.

• If a TP station is not received, the unit continues the

search operation. Pressing [TA] button again goes off

“TA” in the display and stops TP station searching.

●Switching the REG function OFF

Press and hold the [AF] button for 1 second or

longer.

Auto store function for TP stations

You can automatically store up to 6 TP stations into

preset memory. If the number of TP that can be re-

ceived is less than 6, broadcast stations already

stored in memory are left without being overwritten.

“REG” in the display goes off and the REG func-

tion turns off.

Manually tuning a regional station

in the same network

1. This function is valid when the AF function is

ON and the REG function is OFF.

With “TA” lit in the display, press and hold the [P/A]

button for 2 seconds or longer.The TP stations with

the good reception sensitivity are stored into preset

memory.

Note:

Even if you select FM1 or FM2, aTP station is stored

into memory for FM3.

• This function can be used when a regional broad-

cast of the same network is received.

2. Press any one of the [DIRECT] buttons to

call out the regional station.

3. If the reception condition of the called out

station is bad, press the [DIRECT] button of

the same number. The unit receives a local

station on the same network.

DXZ938R

Download from Www.Somanuals.com. All Manuals Search And Download.

RDS Operations

cast moving up the frequencies; if you press

the [a] button, it seeks moving down the

frequencies.

PTY

This function enables you to listen to a broad-

cast of the selected programme type when it

starts even if the unit is on a function mode

other than radio.

If no station with the selected PTY broadcast

can be received, the unit returns to the PTY

select mode.

Some countries do not yet have PTY broadcast.

In the TA standby mode, a TP station has priority

over a PTY broadcast station.

PTY preset memory

1. When you press the [PTY] button, the PTY

select mode is turned on.

●Setting the PTY standby mode

When you press the [PTY] button, “PTY” lights in

the display and the PTY standby mode is turned

on. When the selected PTY broadcast starts, the

PTY item name appears in the display.

2. Turn the [ROTARY] knob clockwise or coun-

terclockwise to select the desired PTY.

The 29 types of PTY below can be selected.

●Cancelling the PTY standby mode

PTY item

When you press and hold the [PTY] button for 1

second or longer, “PTY” goes off in the display

and PTY standby mode is cancelled.

ENGLISH

NEWS

Contents

News

AFFAIRS

INFO

Today’s events

Information

Sports

●Cancelling a PTY interrupt broadcast

Press the [PTY] button during the PTY interrupt

broadcast, the PTY interrupt is cancelled and

the unit returns to PTY standby mode.

SPORT

EDUCATE

DRAMA

Education

Drama

CULTURE

SCIENCE

VARIED

Culture

Selecting PTY

1. When you press the [PTY] button, the unit

goes into PTY select mode.

Science

Variety

2. Press any one of the [DIRECT] buttons. Al-

ternatively, turn the [ROTARY] knob clock-

wise or counterclockwise to select the de-

sired PTY.

POP M

Pop music

Rock music

Easy music

Light music

Classics

ROCK M

EASY M

LIGHT M

CLASSICS

OTHER M

WEATHER

FINANCE

CHILDREN

SOCIAL

Below are the factory default settings stored

for the [DIRECT] buttons.

Other music

Weather

Finance

PTY item

Contents

News

Preset

number

ENGLISH

NEWS

For children

Social

INFO

Information

Pop Music

Sport

POP M

SPORT

RELIGION

PHONE IN

TRAVEL

LEISURE

JAZZ

Religion

Phone in

Travel

CLASSICS Serious Classical Music

EASY M Easy Listening Music

Leisure

3. The PTY select mode is cancelled automati-

cally 7 seconds after a PTY is selected.

Jazz

COUNTRY

NATION M

OLDIES

Country

Nation music

Oldies

PTY seek

1. When you press the [PTY] button, the PTY

select mode is turned on.

FOLK M

DOCUMENT

Folk music

Documentaries

2. Select PTY.

3. Press the [a] or [d] button. If you press

the [d] button, the unit seeks a PTY broad-

DXZ938R

Download from Www.Somanuals.com. All Manuals Search And Download.

CD Operations

RDS oprations

3. If you press and hold any one of the [DIRECT]

buttons for 2 seconds or longer, the selected

PTY is stored into that preset channel memory.

Loading a CD

1. Press the [O] button. The DUAL ACTION

opens.

CAUTION

Be careful not to get your fingers caught

when opening and closing the DUAL AC-

TION.

Emergency broadcast

If an emergency broadcast is received, all the

function mode operations are stopped.

“ALARM” appears in the display and the emer-

gency broadcast can be heard.

2. Press the [CD EJECT] button.

●Cancelling an emergency broadcast

3. Insert a CD into the centre of the insertion

slot with the label side facing up. The CD

plays automatically after loading.

If you press the [AF] button, emergency broad-

cast reception is cancelled.

Notes:

• Never insert foreign objects into the CD insertion

slot.

• If the CD is not inserted easily, there may be an-

other CD in the mechanism or the unit may re-

quire service.

Switching the PTY display language

You can select one of 4 languages (English,

German, Swedish or French) for the PTY dis-

played in the display.

The factory default setting is “ENGLISH”.

• Discs not bearing the

mark and

1. Press and hold the [TITLE] button for 1 sec-

ond or longer to switch to the adjustment se-

lection display.

CD-ROMs cannot be played by this unit.

Loading 8 cm compact discs

2. Press the [a] or [d] button and select

“LANGUAGE”.

No adapter is required to play an 8 cm CD.

Insert the 8 cm CD into the centre of the inser-

tion slot.

3. Press the [

] button

4. Turn the [ROTARY] knob clockwise or coun-

4. After loading a CD, the DUAL ACTION

closes automatically.

terclockwise to select the desired language.

5. Press the [

] button

Notes:

6. Press the [TITLE] button to return to the pre-

• Note that DUAL ACTION closes immediately after

a CD is inserted into CD insertion slot.

vious mode.

• If no CD is loaded in the DUAL ACTION, it closes

after 30 seconds.

Volume setting of TA, emergency

broadcast (ALARM) and PTY

The volume for TA, ALARM and PTY interrupts

can be set during TA, ALARM or PTY interrupt.

Listening to a CD already inserted

Press the [FNC] button to select the CD mode.

Play starts automatically. If no CD is loaded in

the unit, “NO DISC” appears in the display.

The factory default setting is “15”.

During a TA, ALARM or PTY interrupt, turn the

[ROTARY] knob clockwise or counterclockwise

to set the volume to the desired level (0 to 33).

Pausing play

1. Press the [

] button to pause play.

When the TA, ALARM or PTY interrupt ends, the

volume returns to the level it had before the inter-

rupt.

“PAUSE” appears in the display.

2. To resume CD play, press the [

again.

] button

DXZ938R

Download from Www.Somanuals.com. All Manuals Search And Download.

CD Operations

Top function

The top function resets the CD player to the first

track of the disc. Press the [BND] button to play

the first track (track No. 1) on the disc.

Ejecting a CD

1. Press the [O] button. The DUAL ACTION

opens. Press the [CD EJECT] button to eject

a CD. “EJECT” appears in the display.

CAUTION

Scan play

Be careful not to get your fingers caught

when opening and closing the DUAL AC-

TION.

The scan play locates and plays the first 10 sec-

onds of each track on a disc automatically. This

function continues on the disc until it is cancelled.

2. Remove the CD and press the [Q] button to

The scan play is useful when you want to select a

desired track.

close the DUAL ACTION.

Notes:

1. Press the [P/A] button to start scan play.“SCN”

• Be sure to close the DUAL ACTION after remov-

ing the CD.

• The DUAL ACTION closes automatically 30 sec-

onds after removing the CD.

• If a CD (12 cm) is left in the ejected position for

15 seconds, the CD is automatically reloaded.

(Auto reload)

lights in the display.

2. To cancel the scan play, press the [P/A] but-

ton again. “SCN” goes off from the display

and the current track continues to play.

Repeat play

• 8 cm CDs are not auto reloaded. Be sure to re-

move it when ejected.

• If you force a CD into before auto reloading, this

can damage the CD.

• When it fails in eject operation when the eject but-

ton is pressed down, fully press the eject button

down again. (If the eject button operation is in-

complete, it means that the Dual Action Mecha-

nism is suspended, so do not perform other fur-

ther operation without releasing the Dual Action

Mechanism stopped midway.)

The repeat play continuously plays the current

track. This function continues automatically until

it is cancelled.

1. Press the [AF] button. “RPT” lights in the dis-

play and the current track is repeated.

2. To cancel the repeat play, press the [AF] but-

ton again.“RPT” goes off from the display and

normal play resumes.

Random play

The random play selects and plays individual tracks

on a disc in no particular order. This function con-

tinues automatically until it is cancelled.

Selecting a track

●Track-up

1. Press the [d] button to move ahead to the

1. Press the [PTY] button. “RDM” lights in the

display, an individual track is selected ran-

domly and play begins.

beginning of the next track.

2. Each time you press the [d] button, the

track advances ahead to the beginning of the

next track.

2. To cancel the random play, press the [PTY]

button again.“RDM” goes off and normal play

resumes.

●Track-down

1. Press the [a] button to move back to the

beginning of the current track.

2. Press the [a] button twice to move to the

beginning of the previous track.

Fast-forward/fast-backward

●Fast-forward

Press and hold the [d] button for 1 second or

longer.

●Fast-backward

Press and hold the [a] button for 1 second or

longer.

DXZ938R

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations Common to Each Mode

3. Press one of the [DIRECT] buttons to select

Entering titles-DISC or STATION

TITLE

Titles up to 10 characters long can be stored in

memory and displayed for CD, CD changer and

TV stations. The number of titles that can be en-

tered for each mode are as follows.

the use memory to which you want to give a

title.

4. Press the [TITLE] button.

5. Press the [a] or [d] button to move the

cursor.

6. Press the [DISP] button to select the charac-

ter. Each time you press the [DISP] button,

the character changes in the following order:

Capital letters ➜ Small letters ➜ Numbers

and Symbols ➜ Umlaut ➜ Capital letter…

Mode

Number of titles

50 titles

CD mode

TV mode

15 titles

CD changer mode

CDC655z connected

CDC655Tz connected

CDC1255z connected

Number of titles

60 titles

7. Turn the [ROTARY] knob clockwise or coun-

terclockwise to adjust desired character.

100 titles

8. Repeat steps 5 to 7 to enter up to 10 charac-

ters for the title.

50 titles

1. Press the [FNC] button to select the mode you

9. Press and hold the the [

] button for 2

want to enter a title (CD, CD changer or TV).

second or longer to store the title into

memory and cancel title input mode.

2. Select and play a CD in the CD changer or

tune in to a TV station for which you want to

enter the title.

Clearing titles

3. Press the [DISP] button and display the

1. Select and play a CD in the CD changer or

tune in to a TV station for which you want to

clear the title.

main.

4. Press the [TITLE] button. “TITL” appears in

the display and the cursor position flashes.

2. Press the [DISP] button and display the

5. Press the [a] or [d] button to move the

main.

cursor.

3. Press the [TITLE] button.“TITL” appears in

the display and the display switches to the

title input display.

6. Press the [DISP] button to select a character.

Each time you press the [DISP] button, the

character changes in the following order:

4. Press the [BND] button.

Capital letters ➜ Small letters ➜ Numbers

and Symbols ➜ Umlaut ➜ Capital letters...

5. Press and hold the [

] button for 1 sec-

ond or longer to clear the title and cancel title

input mode.

7. Turn the [ROTARY] knob to select the de-

sired character. Turning the [ROTARY] knob

clockwise moves the cursor to the next char-

acter; turning it counterclockwise moves the

cursor to the previous character.

Dimmer Level

1. Press the [TITLE] button for 1 second or

longer to enter ADJ mode.

8. Repeat steps 5 to 7 to enter up to 10 charac-

ters for the title.

2. Press the [a] or [d] button to select the

“DIMMER LV”.

9. Press and hold the [

] button for 2 sec-

3. Turn the [ROTARY] knob clockwise or coun-

onds or longer to store the title into memory

and cancel title input mode.

terclockwise to adjust Dimmer level.

4. Press the [TITLE] button to return to the pre-

vious mode.

Entering titles-Adjusted Effect

items title

You can give a title to the user memory of the

AC-PII VSE POSITION and P.EQ that you have

adjusted.

Adjustment range is off to LV5.

Factory default setting is LV3.

Contrast

1. Press the [TITLE] button for 1 second or

longer to enter ADJ mode.

1. Select the adjustment mode in which you

want to give a title.

2. Press the [a] or [d] button to select the

“CONTRAST”.

2. Press the [BND] button to select the user

preset side.

DXZ938R

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations Common to Each Mode

Selecting AUX IN sensitivity

Make the following settings to select the sensi-

tivity when sounds from external devices con-

nected to this unit are difficult to hear even after

adjusting the volume.

3. Turn the [ROTARY] knob clockwise or coun-

terclockwise to adjust Contrast level.

4. Press the [TITLE] button to return to the pre-

vious mode.

Adjustment range is LV1 to LV18

Factory default setting is LV18.

The factory default setting is “SENS LOW”.

1. Press and hold the [TITLE] button for 1 sec-

ond or longer to switch to the adjustment se-

lection display.

Key Illumi

1. Press the [TITLE] button for 1 second or

longer to enter ADJ mode.

2. Press the [a] or [d] button and select

“AUX SENS”.

2. Press the [a] or [d] button to select the

“KEY ILLUMI”.

3. Turn the [ROTARY] knob clockwise or coun-

terclockwise as needed and select from

3. Turn the [ROTARY] knob clockwise or coun-

“SENS HIGH”, “SENS MID” or “SENS LOW”.

terclockwise to select Key illumi color.

4. Press the [TITLE] button to return to the pre-

vious mode.

Selectable color is Green or Red.

Factory default setting is Red.

Screen saver function

This unit is provided with the screen saver func-

tion which allows you to show various kinds of

patterns and characters in the Operation Status

indication area of the display.You can turn on

and off this function.

Message display

When the unit is powered on or off, a message

is displayed. The user can turn this message

display ON or OFF.

If the button operation is performed with the

screen saver function on, the operation display

corresponding to the button operation is shown

for about 30 seconds and the display returns to

the screen saver display.

The factory default setting is “ON”.

1. Press and hold the [TITLE] button for 1 sec-

ond or longer to switch to the adjustment se-

lection display.

The factory default setting is “RANDOM”.

2. Press the [a] or [d] button to select “MES-

SAGE”.

1. Press the [TITLE] button for 1 second or

longer to enter ADJ mode.

3. Turn the [ROTARY] knob clockwise or coun-

terclockwise to set the message display ON

or OFF.

2. Press the [a] or [d] button to select the

“AUTO SS”.

4. Press the [TITLE] button to return to the pre-

3. Press [

mode.

] to enter the AUTO SS ADJ

vious mode.

4. Turn the [ROTARY] knob clockwise or coun-

terclockwise to select AUTO SS type or

AUTO SS off.

Beep

1. Press the [TITLE] button for 1 second or

longer to enter ADJ mode.

5. Press the [TITLE] button to return to the pre-

vious mode.

2. Press the [a] or [d] button to select the

“BEEP”.

SS type are SS OFF, SS PTN1, SS PTN2,

SS PTN3, SS RANDOM

3. Turn the [ROTARY] knob clockwise or coun-

terclockwise to switch Beep on or Beep off.

Displaying titles

This unit can display title data and user title data

input with this unit.

4. Press the [TITLE] button to return to the pre-

vious mode.

Factory default setting is Beep off.

1. Press the [DISP] button to display the title.

2. Each time you press and hold the [DISP] but-

ton for 1 second or longer, the title display

changes.

AUX function

This system has an external RCA input so you

can listen to sounds and music from external

devices connected to this unit.

DXZ938R

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations Common to Each Mode

Note:

2. Press the [a] or [d] button and select

“AUX/TEL”.

The contents of the title to be displayed depend on

a disc to be played.

If a disc with no title or user title input is played,

“NO-TITLE “ appears in the display.

3. Turn the [ROTARY] knob clockwise or coun-

terclockwise as needed and select from

“AUX”or “TEL”.

● AUX :

Setting the method for Ttitle scroll

Set how to scroll in CD-TEXT or MD.

The factory default setting is “ON”.

AUX/TEL input cable is for external Audio input.

●TEL :

AUX/TEL input cable is for cellular phone au-

dio input.

1. Press and hold the [TITLE] button for 1 sec-

ond or longer to switch to the adjustment se-

lection display.

4. Press the [TITLE] button to return to the pre-

vious mode.

2. Press the [a] or [d] button and select

“AUTO SCROLL”.

Setting the car speaker output for

the cellular phone

The factory default setting is “RIGHT”.

3. Turn the [ROTARY] knob clockwise or coun-

terclockwise and select “ON” or “OFF”.

● ON:

To output the telephone calls, set the cellular phone

interrupt to ON.

To scroll automatically.

● OFF:

1. Press and hold the [TITLE] button for 1 sec-

ond or longer to switch to the adjustment se-

lection display.

To scroll just 1 time when the title was

changed or the title key was pressed.

4. Press the [TITLE] button to return to the pre-

2. Press the [a] or [d] button to select “TEL-

SP”.

vious mode.

3. Turn the [ROTARY] knob clockwise to select

“RIGHT” or counterclockwise to select

“LEFT”.

Anti-theft indicator

The red Anti-theft indicator is a function for pre-

venting theft. When the DCP is removed from

the unit, this indicator blinks.

● RIGHT:

Telephone calls can be heard on the front

right speaker connected to this unit.

The factory default setting is “OFF”.

1. Press and hold the [TITLE] button for 1 sec-

ond or longer to switch to the adjustment se-

lection display.

● LEFT:

Telephone calls can be heard on the front left

speaker connected to this unit.

2. Press the [a] or [d] button and select

“BLINK LED”.

4. Press the [TITLE] button to return to the pre-

vious mode.

3. Turn the [ROTARY] knob clockwise to set this

function “ON” or turn it counterclockwise to

switch this function “OFF”.

Cellular phone interrupt setting

If you connect this unit and your cellular phone

with a separately sold cable, you can listen to

your telephone calls on your car speakers.

4. Press the [TITLE] button to return to the pre-

vious mode.

The factory default setting is “OF”.

Selecting AUX/TEL

You can listen to sounds and music from exter-

nal devices or your telephone calls from the

speakers when connected to this unit.

1. Press and hold the [TITLE] button for 1 sec-

ond or longer to switch to the adjustment se-

lection display.

2. Press the [a] or [d] button to select “TEL-

SWITCH”.

When TEL INT or External device is connected to

this unit, you can select TEL mode or AUX mode.

3. Turn the [ROTARY] knob clockwise or coun-

terclockwise to select the setting. Each time

you turn the [ROTARY] knob, the setting

changes in the following order:

The factory default setting is “AUX”.

1. Press and hold the [TITLE] button for 1 sec-

ond or longer to switch to the adjustment se-

lection display.

DXZ938R

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations Common to Each Mode

OFF ➜ ON ➜ MUTE ➜ OFF...

● OFF:

Setting Auto Volume sensitivity

1. Press and hold the “TITLE” button for 1 sec-

ond or longer and enter “ADJ” mode

This unit continues normal operation even

when the cellular phone is used.

2. Press the [a] or [d] button to select the

“A-VOL SENS”

Note:

• If conncting a hands-free kit, please ensure the

setting is ON to receive the telephone audio

through the system.

3. Turn the “ROTARY” knob clockwise or coun-

terclockwise to make the adjustment.

The adjustment steps are below 6 steps, Off

➜ Low ➜ M-L ➜ Mid ➜ M-H ➜ High.

● ON:

You can listen to your telephone calls from

the speakers connected to this unit.

When listening to your calls on your car

speakers, you can adjust the volume by turn-

ing the [ROTARY] knob.

● MUTE:

The sound from this unit is muted during

telephone calls.

4. Press the [TITLE] button to return to the pre-

vious mode.

Setting Auto Volume

1. Press and hold the “TITLE” button for 1 sec-

ond or longer and enter “ADJ” mode

2. Press the [a] or [d] button to select

the”CALIBRATE”

3. Press the “PLAY/PAUSE” button and

“START” is displayed.

4. Keep driving speed 50km/h and press the

“PLAY/PAUSE” button.

5. “CALIBRATION” is flush for 2seconds in dis-

play.

6. If calibration is successful display indicate

“SUCCESSFUL” and sound long beep, or if

calibration is not successful display indicate

“FAILED” and sound 2 times a short beep.

7. If you failed, repeat steps 3 to 6.

Note:

• When installing this device or transferring it into

another vehicle, for the sake of safety, always

have this work done by the store of purchase or

your nearest Clarion dealer. Installation requires

specialized techniques and experience.

DXZ938R

Download from Www.Somanuals.com. All Manuals Search And Download.

7. OPERATIONS OF ACCESSORIES

CD/MD/DVD Changer Operations

●Track-down

CD/MD/DVD changer functions

1. Press the [a] button to move back to the

When an optional CD/MD/DVD changer is con-

beginning of the current track.

nected through the CeNET cable, this unit con-

trols all CD/MD/DVD changer functions. This unit

can control a total of 2 changers (CD/MD/DVD).

2. Press the [a] button twice to move to the

beginning of the previous track.

Press the [FNC] button and select the CD/MD/

DVD changer mode to start play. If 2 changers

are connected, press the [FNC] button to select

the CD/MD/DVD changer for play.

Fast-forward/fast-backward

●Fast-forward

Press and hold the [d] button for 1 second or

If “NO MAGAZINE” appears in the display, insert

the magazine into the changer.“LOADING” appears

in the display while the player loads (checks) the

magazine.

longer.

●Fast-backward

Press and hold the [a] button for 1 second or

If “NO DISC” appears in the display, eject the maga-

zine and insert discs into each slot. Then, reinsert

the magazine back into the changer.

longer.

Top function

The top function plays from the first track of the

disc.

CAUTION

CD-ROM discs and CD-R discs cannot be

played in the CD changer.

●When playing a disc 1 to 6

Press the [DIRECT] button (1 to 6) with the

same number as the CD playing.

Pausing play

1. Press the [

] button to pause play.

●When playing a disc 7 to 12 (only when a

12 disc CD changer is used.)

“PAUSE” appears in the display.

2. To resume play, press the [

] button again.

Press and hold for 1 second or longer the [DI-

RECT] button (1 to 6) with the same number as

the CD playing.

Selecting a DISC

Each [DIRECT] button corresponds to a disc

loaded into the magazine.

If a CD is not loaded in a slot of magazine, pressing

the [DIRECT] button corresponding to its disc num-

ber is invalid.

●Selecting a disc from 1 to 6

Press the corresponding [DIRECT] button (1 to

6) to select the desired disc.

Scan play

Scan play locates and plays the first 10 seconds

of each track on a disc automatically. This func-

tion continues on the disc until it is cancelled.

●Selecting a disc from 7 to 12 (only when a

12 disc CD changer is used.)

Press and hold the [DIRECT] button (1 to 6) for

1 second or longer to select the desired disc.

The scan play is useful when you want to select a

desired track.

If a CD is not loaded in a slot of magazine, pressing

the [DIRECT] button corresponding to its disc num-

ber is invalid.

1. Press the [P/A] button to start track scan-

ning. “SCN” lights in the display.

2. To cancel the scan play, press the [P/A] but-

ton again. “SCN” goes off from the display

and the current track continues to play.

Selecting a track

●Track-up

1. Press the [d] button to move ahead to the

beginning of the next track.

2. Each time you press the [d] button, the

track advances ahead to the beginning of the

next track.

DXZ938R

Download from Www.Somanuals.com. All Manuals Search And Download.

CD/MD/DVD Changer Operations

Disc scan play

Disc random play

Disc scan play locates and plays the first 10

seconds of the first track on each disc in the cur-

rently selected CD (MD) changer. This function

continues automatically until it is cancelled.

The disc random play selects and plays indi-

vidual tracks or discs automatically in no par-

ticular order. This function continues automati-

cally until it is cancelled.

Disc scan play is useful when you want to select a

desired CD (MD).

1. Press and hold the [PTY] button for 1 second

or longer. “DISC” and “RDM” light in the dis-

play and disc random play starts.

1. Press and hold the [P/A] button for 1 second

or longer. “DISC” and “SCN” light in the dis-

play and disc scan play starts.

2. To cancel disc random play, press and hold

the [PTY] button again. “DISC” and “RDM” go

off from the display and normal play resumes

from the current track.

2. To cancel disc scan play, press the [P/A] but-

ton again. “DISC” and “SCN” go off from the

display and the current track continues to

play.

Repeat play

Repeat play continuously plays the current track.

This function continues automatically until it is

cancelled.

1. Press the [AF] button. “RPT” lights in the dis-

play and the current track is repeated.

2. To cancel repeat play, press the [AF] button

again. “RPT” goes off from the display and

normal play resumes.

Disc repeat play

After all the tracks on the current disc have been

played, disc repeat play automatically replays

the current disc over from the first track. This

function continues automatically until it is can-

celled.

1. Press and hold the [AF] button for 1 second

or longer. “DISC” and “RPT” light in the dis-

play and disc repeat play starts.

2. To cancel disc repeat play, press and hold

the [AF] button again. “DISC” and “RPT” go

off from the display and normal play resumes

on the current track.

Random play

Random play selects and plays individual tracks

on the disc in no particular order. This function

continues automatically until it is cancelled.

1. Press the [PTY] button. “RDM” lights in the

display and random play begins.

2. To cancel random play, press the [PTY] but-

ton again. “RDM” goes off from the display

and normal play resumes.

DXZ938R

Download from Www.Somanuals.com. All Manuals Search And Download.

TV Operations

1. Press the [BND] button and select the de-

TV tuner functions

sired band (TV1 or TV2).

When an optional TV tuner is connected through

the CeNET cable, this unit controls all TV tuner

functions. To watch TV requires a TV tuner and

monitor.

If “MANU” is not lit in the display, press and

hold the [BND] button for 1 second or longer.

“MANU” lights in the display and manual tun-

ing is now available.

2. Tune into a station.

Watching aTV

●Quick tuning:

1. Press the [FNC] button and select the TV

Press and hold the [a] or [d] button for 1

mode.

second or longer to tune in a station.

2. Press the [BND] button to select the desired

TV band (TV1 or TV2). Each time the button

is pressed, the input selection toggles be-

tween TV1 and TV2.

●Step tuning:

Press the [a] or [d] button to manually

tune in a station.

3. Press the [a] or [d] button to tune in the

desired TV station.

Recalling a preset station

A total of 12 TV stations can be stored (6-TV1

and 6-TV2). This allows you to select your favor-

ite TV stations and store them in memory for

later recall.

Watching a video

The TV tuner has a VTR input terminal to which

1 external device can be connected. Connect a

12 V video cassette player (VCP) or video cas-

sette recorder (VCR) to the TV tuner input termi-

nal.

1. Press the [BND] button and select the de-

sired TV band (TV1 or TV2).

2. To recall a stored TV station, press the de-

sired [DIRECT] button to select that station.

1. Press the [PTY] button to select VTR.

Press and hold one of the [DIRECT] buttons

for 2 seconds or longer to store the current

station into preset memory.

2. To return to the TV broadcast, press the

[PTY] button.

Tuning

Manual memory

1. Select the desired station with seek tuning,

manual tuning or preset tuning.

There are 3 types of tuning mode available,

Seek tuning, manual tuning and preset tuning.

2. Press and hold one of [DIRECT] buttons for

2 seconds or longer to store the current sta-

tion into preset memory.

Seek tuning

1. Press the [BND] button and select the de-

sired TV band (TV1 or TV2).

If “MANU” is lit in the display, press and hold

the [BND] button for 1 second or longer.

“MANU” in the display goes off and seek tun-

ing is now available.

Auto store

Auto store selects 6 TV stations automatically

and stores each one into preset memory.

If there are not 6 stations with good reception,

stations previously stored in memory remain

and only the strong stations are stored into

memory.

2. Press the [a] or [d] button to automatically

seek a station. Press the [d] button to auto-

matically tune up the frequency band to the

next available TV station; press the [a] but-

ton to automatically tune down.

1. Press the [BND] button and select the de-

sired TV band (TV1 or TV2).

Manual tuning

There are 2 ways available: Quick tuning and

step tuning.

When you are in the step tuning mode, the fre-

quency changes one step at a time. In the quick

tuning mode, you can quickly tune the desired

frequency.

DXZ938R

Download from Www.Somanuals.com. All Manuals Search And Download.

TV Operations

Digital Radio / DAB Operations

DAB control function

2. Press and hold the [P/A] button for 2 sec-

onds or longer. The stations with good recep-

tion are stored automatically to the preset

channels.

When a CeNET cable is used to connect a DAB

(DAH913 or DAH9500z) (sold separetely), all

functions can be operated.

Preset scan

Listening to the DAB station

1. Press the [FNC] button to select the DAB

mode.

Preset scan allows the user to view each preset

position before it automatically advances to the

next preset. This function is useful for searching

for a desired TV station in memory.

2. When the unit receives a DAB station, the

display changes in the following order:

1. Press the [P/A] button.

Frequency channel ➜ service label

2. When the desired station is found, press the

[P/A] button again to remain tuned to that

station.

Switching displays

Press the [DISP] button for 1 second during the

Main (service label) display to select Main (ser-

vice label) or Sub (PTY).

Note:

• Do not press and hold the [P/A] button for 2 sec-

onds or longer. Doing so will trigger the auto store

function and start storing stations into memory.

Notes:

• The display shown in the normal reception mode

and the preset reception mode is the same when

a DAB station is received.

• The number of programmes and broadcasting

times depend on the DAB stations.

Setting the TV area

When you select the TV area (TV reception

area), the TV tuner area setting changes.

1. Press and hold the [TITLE] button for 1 sec-

ond or longer to switch to the adjustment se-

lection display.

• When the strength of DAB signals is weak, audio

output is muted.

2. Press the [a] or [d] button to select “TV

AREA”.

Seek tuning

1. Press the [FNC] button to select the DAB mode.

3. Press the [

] button.

2. Press and hold the [a] or [d] button for 1

second or longer.

4. Turn the [ROTARY] knob clockwise or coun-

terclockwise to select the reception area.

“SEARCHING” appears in the display.

5. Press the [

] button.

3. “DAB” lights up in the display when the main

6. Press the [TITLE] button to return to the pre-

unit receives a DAB station.

vious mode.

* The main unit stops the seek tuning when it

cannot find a DAB station. The display returns

to the previous mode.

Setting the TV diver

You can change the reception setting for the TV

antenna connected to the TV tuner.

Manual tuning

1. Press and hold the [TITLE] button for 1 second or

1. Press the [FNC] button to select the DAB mode.

longer to switch to the adjustment selection display.

2. Press and hold the [BND] button for 1 second

or longer. “MANU” lights up in the display.

2. Press the [a] or [d] button to select “TV

DIVER”.

3. Press the [a] or [d] button to select a sta-

3. Turn the [ROTARY] knob clockwise to set to

“ON” or counterclockwise to set to “OFF”.

tion.

If no operation is performed for more than 7

seconds, manual tuning is cancelled and the

display returns to the previous mode.

● ON:

Sets reception emphasizing the visual.

● OFF:

Sets the diver setting to OFF.

4. Press the [TITLE] button to return to the pre-

vious mode.

DXZ938R

Download from Www.Somanuals.com. All Manuals Search And Download.

Digital Radio / DAB Operations

Switching programmes

1. Press the [FNC] button to receive a DAB station.

3. Press one of the [DIRECT] buttons to recall a

preset programme.

Note:

2. Press the [a] or [d] button to switch

• Press and hold the [DIRECT] button for 2 sec-

onds or longer to store the programme currently

being received. (Manual memory)

programmes in the DAB station.

Note:

• The programme name may be the same depend-

ing on DAB programmes.

AF function

The AF function switches to a different fre-

quency on the same network in order to main-

tain optimum reception.

Programme scan

This function scans through each receivable

programme in a DAB station being received for

10 seconds sequentially. This is useful when you

want to search for a desired programme.

The factory default setting is “ON”

If the reception of the current broadcast station de-

teriorates, “SEARCH” appears in the display and

the radio searches for the same programme on

another frequency.

1. Press the [FNC] button to receive a DAB station.

2. Perform the following operation depending

on the connected model.

For details on “AF function”, refer to the section

“RDS operation” of each owner’s manual.

Press the [P/A] button. “SERVICE SCN”

lights up and the unit starts scanning each

programme for 10 seconds sequentially.

Each time the main unit scans, the

●Switching OFF the AF function

●Switching ON the AF function

●AF function between RDS and DAB

programme name is shown in the display.

When the same programme is broadcast by

both RDS and DAB, and this function is ON, the

main unit switches to receiving the broadcast

with the better reception automatically.

3. To stop programme scan when a desired

programme is tuned in.

Press the [P/A] button.

Manual memory

TA (Traffic Announcement)

The main unit has a manual memory function for

DAB programmes. Up to 18 programmes (6

programmes each) can be preset in the preset

buttons.

In the TA standby mode, when a traffic announce-

ment broadcast starts, the traffic announcement

broadcast is received as top priority regardless of

the function mode. Traffic programme (TP) auto-

matic tuning is also possible.

[M1], [M2] and [M3]

1. Press the [FNC] button to select the DAB

This function can only be used when “TP” is lit in

the display. When “TP” is lit, this means that the

DAB or RDS broadcast station being received has

traffic announcement programmes.

mode.

2. Press the [BND] button to select any one

shown above.

For details on “TA”, refer to the section “RDS op-

eration” of each owner’s manual.

3. Press the [a] or [d] button to select a de-

sired programme.

●Setting the TA standby mode

●Cancelling the TA standby mode

●Searching for a TP station

Notes:

4. Press and hold one of the [DIRECT] buttons

(1 to 6) for 2 seconds or longer to store the

programme.

Note:

• If a TP station is not received, the main unit stops

the search operation.

• The interrupt programme (PTY or INFO) cannot

be written into a manual memory.

• “TP” may be lit in the display when a TP broad-

cast is transmitted from an RDS station. In this

case, press the [TA] button to perform TP seek

tuning. Press the [TA] button again to return to the

previous mode.

Recalling a preset programme

1. Press the [FNC] button to select the DAB mode.

2. Press the [BND] button. Each time you press

the [BND] button, the display changes in the

following order:

[M1] ➜ [M2] ➜ [M3] ➜ [M1]...

DXZ938R

Download from Www.Somanuals.com. All Manuals Search And Download.

Digital Radio / DAB Operations

INFO (Announcement)

Turn the [ROTARY] knob clockwise or

counterclock wise to set the information item

for ON or OFF.

In the INFO standby mode, when the selected

announcement programme starts, the main unit

switches to the selected announcement

programme automatically.

5. Press the [TITLE] button to return to the pre-

vious display.

●Setting the INFO standby mode

If you press and hold the [TA] button for 1 sec-

ond or longer, “INFO” lights in the display and

the main unit is set into the INFO standby mode

until the selected announcement is broadcast.

When the selected announcement broadcast

starts, the announcement item appears in the

display. If you press and hold the [TA] button for

1 second or longer while the selected an-

nouncement broadcast is being received, the

selected announcement broadcast reception is

cancelled and the main unit goes into the INFO

standby mode.

PTY

This function enables you to listen to the se-

lected programme type, irrespective of the func-

tion mode.

One common PTY can be selected for DAB or RDS.

Of DAB PTY and RDS PTY, the PTY which is re-

ceived earlier takes priority over the other.

PTY broadcasts are not yet available in all coun-

tries.

In the INFO standby mode, INFO stations have pri-

ority over PTY stations.

In the TA standby mode, TP stations have priority

over PTY stations.

●Cancelling INFO standby mode

To cancel the INFO standby mode, press and

hold the [TA] button for 1 second or longer.

For details on “PTY”, refer to the section “RDS op-

eration” of each owner’s manual.

●Information select

●Setting the PTY standby mode

●Cancelling the PTY standby mode

●Cancelling a PTY interrupt broadcast

●Selecting PTY

This is a function for selecting INFORMATION

ON or OFF in the Information interrupt mode.

You can set ON up to 6 information items.

You can select any of the 6 items below:

●PTY seek

INFORMATION item

●PTY preset memory

ENGLISH

TRAVEL

WARNING

NEWS

Contents

Transport flash

Warning / Service

News flash

Emergency broadcast

When an emergency broadcast is received, all

the function mode operations are stopped.

“ALARM” appears in the display and the emer-

gency broadcast can be heard.

WEATHER

EVENT

Area weather flash

Event announcement

Special event

For details on “Emergency broadcast”, refer to the

section “RDS operation” of each owner’s manual.

SPECIAL

●Cancelling an emergency broadcast

1. Perform the following operation depending

on the connected model.

Press and hold the [TITLE] button for 1 second or

longer.

Switching the PTY and INFO display

language

You can select one of 4 languages (English,

German, Swedish or French) for the PTY and

INFO shown in the display.

2. Press the [a] or [d] button to select “INFO

SEL”, then press the [

“INFO SEL” mode.

] button to enter

3. Press the [a] or [d] button to select an in-

The factory default setting is “ENGLISH”.

formation item.You can select any of 6 items:

For details on “Switching the PTY and INFO dis-

play language”, refer to the section “RDS opera-

tion” of each owner’s manual.

TRAVEL ➜ WARNING ➜ NEWS ➜

WEATHER ➜ EVENT ➜ SPECIAL ➜

TRAVEL ➜ ...

4. Perform the following operation depending

on the connected model.

DXZ938R

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD DECK Operations

Digital Radio / DAB Operations

Volume setting of TA, INFO,

emergency broadcast (ALARM) and

Operation

●Play/Still operation

Press the [

mode (play, still (pause)).

] button to select the desired

PTY

The volume for TA, INFO, ALARM and PTY in-

terrupts can be set during TA, INFO, ALARM

and PTY interrupt. Perform the following opera-

tion depending on the connected model.

Each time the button is pressed, the mode

changes cyclically.

●Chapter up/down operation (FF/FB opera-

tion)

The factory default setting is “15”.

During a TA, INFO, ALARM or PTY interrupt,

turn the [ROTARY] knob clockwise or counter-

clockwise to set the volume to a desired level (0

to 33).

Press the [d] button for 1 second or shorter to

increment chapters.

Hold down the [d] button for 1 second or longer

to fast forward.

When theTA, INFO, ALARM or PTY interrupt ends,

the volume returns to the level it had before the in-

terrupt.

Press the [a] button for 1 second or shorter to

decrement chapters.

Hold down the [a] button for 1 second or longer

to fast backward.

DXZ938R

Download from Www.Somanuals.com. All Manuals Search And Download.

8. IN CASE OF DIFFICULTY

Problem

Cause

Measure

Power does not turn

on.

(No sound is pro-

duced.)

Fuse is blown.

Replace with a fuse of the same amperage. If

the fuse blows again, consult your store of pur-

chase.

Incorrect wiring.

Consult your store of purchase.

No sound output

Power antenna lead is shor- 1. Turn the unit off.

ted to ground or excessive

when operating the

2. Remove all wires attached to the power anten-

unit with amplifiers or current is required for

power antenna

attached.

na lead. Check each wire for a possible short

to ground using an ohm meter.

remote-on the amplifiers or

power antenna.

3. Turn the unit back on.

4. Reconnect each amplifier remote wire to the

power antenna lead one by one. If the amplifi-

ers turn off before all wires are attached, use

an external relay to provide remote-on voltage

(excessive current required).

Nothing happens

when buttons are

pressed.

The microprocessor has

Turn off the power, then

Reset button

malfunctioned due to noise, press the [RELEASE]

etc.

button and remove the

DCP.

Press the reset button

with a thin rod.

Display is not accu-

rate.

DCP or main unit connec-

tors are dirty.

Wipe the dirt off with a soft cloth moistened with

cleaning alcohol.

Compact disc cannot Another compact disc is

be loaded. already loaded.

Eject the compact disc before loading the new

one.

Sound skips or is noi- Compact disc is dirty.

Clean the compact disc with a soft cloth.

sy.

Compact disc is heavily

scratched or warped.

Replace with a compact disc with no scratches.

Sound is bad directly Water droplets may form on Let dry for about 1 hour with the power on.

after power is turned the internal lens when the

on.

car is parked in a humid

place.

Poor sound quality

The equalizer levels are too If the equalizer levels are too high, the sound

high.

may distort. Lower the equalizer levels.

DXZ938R

Download from Www.Somanuals.com. All Manuals Search And Download.

9. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.

Take the measures described below to eliminate the problem.

Error Display

ERROR 2

Cause

Measure

A CD is caught inside the CD deck and is

not ejected.

This is a failure of CD deck’s mechanism and

consult your store of purchase.

ERROR 3

A CD cannot be played due to scratches,

etc.

Replace with a non-scratched,

non-warped-disc.

A CD cannot be played due to pick up fail-

ure.

Consult your store of purchase.

ERROR 6

ERROR 2

ERROR 3

A CD is loaded upside-down inside the CD

deck and does not play.

Eject the disc then reload it properly.

A CD inside the CD changer is not loaded.

This is a failure of CD changer’s mechanism

and consult your store of purchase.

A CD inside the CD changer cannot be

played due to scratches, etc.

Replace with a non-scratched, non-warped

disc.

A CD cannot be played due to pick up fail-

ure.

Consult your store of purchase.

ERROR 6

ERROR H

A CD inside the CD changer cannot be

played because it is loaded upside-down.

Eject the disc then reload it properly.

Displayed when the temperature in the MD

changer is too high and playback has been

stopped automatically.

Lower the surrounding temperature and wait

for a while to cool off MD changer.

ERROR 2

ERROR 3

ERROR 6

An MD inside the MD changer is not loaded. This is a failure of MD changer’s mechanism

and consult your store of purchase.

An MD inside the MD changer cannot be

played due to scratches, etc.

Replace with a non-scratched, non-warped

disc.

An MD inside the MD changer cannot be

played because it is loaded upside-down.

Eject the disc then reload it properly.

Displayed when a non-recorded MD is

loaded in the MD changer.

Load a pre-recorded MD in the MD changer.

DXZ938R

Download from Www.Somanuals.com. All Manuals Search And Download.

Error Display

ERROR 2

Cause

Measure

A DISC inside the DVD changer cannot be

played.

This is a failure of dvd mechanism and con-

sult your store of purchase.

ERROR 3

ERROR 6

A DISC cannot be played due to scratches,

etc.

Retry or replace with a non-scratched, non-

warped-disc.

A DISC inside the DVD changer cannot be

played because it is loaded upside-down.

Eject the disc then reload it properly

Set the correct Parental level.

ERROR P

ERROR R

Parental level error

Region code error

Eject the disc and replace correct region

code disc.

If an error display other than the ones described above appears, press the reset button. If the problem

persists, turn off the power and consult your store of purchase.

DXZ938R

Download from Www.Somanuals.com. All Manuals Search And Download.

10. SPECIFICATIONS

Radio section

Tuning System: PLL synthesizer tuner

General

Output Power: 4 ✕31 W (DIN 45324, +B=14.4V)

Receiving Frequencies:

Power Supply Voltage:

FM : 87.5 to 108 MHz (0.05 MHz steps)

MW : 531 to 1602 kHz (9 kHz steps)

LW : 153 to 279 kHz (3 kHz steps)

14.4 V DC (10.8 to 15.6 V allowable),

negative ground

Power Consumption: Less than 15 A

Speaker Impedance: 4 Ω (4 to 8 Ω allowable)

Auto Antenna Rated Current: 500 mA or less

CD player section

System: Compact disc digital audio system

Frequency Response: 5 Hz to 20 kHz (± 1 dB)

Signal to Noise Ratio: 100 dB (1 kHz) IHF-A

Dynamic Range: 96 dB (1 kHz)

Distortion: 0.01%

Weight:

Main unit: 1.7 kg

Remote control unit: 30 g (including battery)

Dimensions:

Main unit :

178 (W) ✕50 (H) ✕155 (D) mm

Remote control unit:

32 (W) ✕56 (H) ✕24 (D) mm

Note:

• Specifications and design are subject to change without notice for further improvement.

10. CARACTÉRISTIQUES TECHNIQUES

Section radio

Système de syntonisation:Tuner à synthétiseur PLL

Données générales

Puissance de sortie:

4 ✕31 W (DIN 45324, +B = 14,4 V)

Fréquences de réception:

FM : 87,5 à 108 MHz (pas de 0,05 MHz)

PO : 531 à 1602 kHz (pas de 9 kHz)

GO : 153 à 279 kHz (pas de 3 kHz)

Tension d’alimentation:

14,4 V CC (10,8 V à 15,6 V admissible),

masse négative

Consommation: Inférieure à 15 A

Impédance de haut-parleurs:

4 Ω (4 Ω à 8 W admissible)

Section lecteur de CD

Système:

Courant nominal d’antenne automatique:

500 mA ou moins

Système audionumérique de disque compact

Réponse en fréquence: 5 Hz à 20 kHz (± 1 dB)

Rapport signal/bruit: 100 dB (1 kHz) IHF-A

Plage dynamique: 96 dB (1 kHz)

Distorsion: 0,01%

Poids:

Appareil principal: 1,7 kg

Télécommande: 30 g (avec la pile)

Dimensions:

Appareil principal:

178 (L) ✕50 (H) ✕155 (P) mm

Télécommande:

32 (L) ✕56 (H) ✕24 (P) mm

Remarque:

• La conception et les caractéristiques techniques sont sujettes à modification sans préavis pour des raisons

d’amélioration.

302

DXZ938R

Download from Www.Somanuals.com. All Manuals Search And Download.

Craftsman Chipper 247775890 User Manual
Craftsman Garage Door Opener 13953978SRT User Manual
Cuisinart Oven TOB 30 User Manual
Delta Electronics Power Supply SIL720 User Manual
Dimplex Heat Pump SI 24TE SI 37TE User Manual
Edelbrock Automobile Parts 1580 User Manual
EverFocus Security Camera EQH5200 User Manual
Ferris Industries Lawn Mower is3100z series User Manual
Freecom Technologies Network Card FHD 1 User Manual
Gefen Switch EXT DVI 441DL User Manual