EverFocus Security Camera EQH5200 User Manual

2 Megapixel Full HD-CCTV  
Camera  
Operation Instructions  
Model No. EQH5200  
Please read this manual first for correct installation and operation. This manual should be retained for future  
reference. The information in this manual was current when published. The manufacturer reserves the right  
to revise and improve its products. All specifications are therefore subject to change without notice.  
PRECAUTIONS  
1. Do not install the camera near electric or magnetic fields.  
Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and audio  
speakers since the electromagnetic fields generated from these devices may distort the video image.  
2. Never disassemble the camera beyond the recommendations in this manual nor introduce  
materials other than those recommended herein.  
Improper disassembly or introduction of corrosive materials may result in equipment failure or other  
damage.  
3. Try and avoid facing the camera toward the sun.  
In some circumstances, direct sunlight may cause permanent damage to the sensor and/or internal  
circuits.  
4. Keep the power cord away from water and other liquids and never touch the power cord with  
wet hands.  
Touching a wet power cord with hands or touching the power cord with wet hands may result in electric  
shock.  
5. Never install the camera in areas exposed to water, oil or gas.  
Water, oil or gas may result in equipment failure, electric shock or, in extreme cases, fire.  
6. Cleaning  
Do not touch the surface of the sensor directly with the hands. Use a damp soft cloth to remove any  
dirt from the camera body. Use lens tissue or a cotton tipped applicator and ethanol to clean the sensor  
and the camera lens. Please do not use complex solvents, corrosive or abrasive agents for cleaning.  
7. Do not operate the camera beyond the specified temperature, humidity or power source ratings.  
Use the camera at temperatures within 0~ 45(32~113) and humidity between 20~80%.  
The input power source is 12VDC/24VAC.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. PRODUCT OVERVIEW  
Deliver 2 megapixel full HD 1080i quality digital images over standard coaxial cable with the EQH5200!  
Wire new megapixel systems with familiar and easy to install coax and BNC connectors, or reuse the  
existing coax cable infrastructure to efficiently upgrade analog systems to megapixel digital  
performance without the need to design and deploy an IP network. Enjoy true plug-and-play: each  
home run coaxial cable provides a full bandwidth dedicated communications path for the  
HD-SDI/HD-CCTV standards compliant signal; no addressing is required to capture full 1080i HD real  
time video, without congestion, latency or distortion. Easy to install and test, the EQH5200 has a TV  
output at the back of the camera to connect a standard portable test monitor for convenient aim and  
focus.  
The EQH5200 is based on a 1/2.5” 2 megapixel progressive scan sensor for full HD images, with field  
selectable choice of 1080i resolution output, or 720p resolution to conserve DVR hard disk space. With  
dual voltage (12VDC/24VAC) operation, true day/night operation, and a flexible choice of megapixel  
lenses to achieve the desired field of view, the EQH5200 is the right choice to deploy HD-CCTV video  
surveillance.  
1.1 Main Features  
HD-CCTV 2 Megapixel real time 1080i HD video over coax  
2 megapixel progressive scan CMOS sensor  
Supports video outputs of 720p and 1080i  
Lens Types: supports DC and manual iris lenses, CS mount (C mount adapter ring included)  
True day/night mode selectable with automatic ICR module  
Easy to use OSD setup menu  
Dual Video Output : Megapixel HD-SDI (BNC) plus SD TV Out (RCA) for installation  
Dual Power Source 12VDC/24VAC dual voltage  
1.2 Package Contents  
1.  
2.  
3.  
4.  
Camera unit  
Users manual  
ND filter  
Accessory pack containing  
i.  
ii.  
iii.  
iv.  
5mm spacer C/CS Lens adapter  
¼-20 UNC thread mounting bracket and (2) screws  
Allen key to for lens back focus set screw  
Lens control voltage connector  
- 2 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
1.3 Specifications  
Pickup Device  
Sensitivity  
1/2.5" 2 megapixel CMOS sensor  
0.02lux/F=1.2(AGC ON)  
S/N Ratio  
Greater than 50dB (AGC off)  
HD-SDI/HD-CCTV  
1920x1080/2 Megapixel/1080i or 1280x720/1 Megapixel/720p  
Field select 1080i or 720p  
Video Format Main Output  
Resolution Main Output  
Video Mode Main Output  
Main Output Connector  
Video Format Test Output  
Test Output Connector  
Electronic Shutter  
Lens Type  
BNC-F  
NTSC/PAL selectable 1V p-p  
RCA-F  
1/60(1/50)~1/8000  
CS mount (Adapter included for C-mount; lens sold separately).  
Supports DC or manual lens  
On/Off selectable  
High/Middle/Low/Off selectable  
AWB/One Push WB/Manual WB/Indoor/Outdoor  
0.45 nominal, adjustable 0.05~1.00  
Auto, -2.0EV~2.0EV  
Lens Control  
Back Light Comp.  
Auto Gain Control  
Auto White Balance  
Gamma Correction  
Iris Control  
OSD Menu  
True Day/Night Control  
H-Mirror  
Yes (controlled from rear 5-axis joystick control)  
Yes (Auto IR cut filter removal)  
Yes  
Power Source  
12VDC/24VAC  
Power Consumption  
24VAC: 6W max.  
12VDC: 6W max.  
Dimensions (incl. BNC)  
68mm(W) x 56mm(H) x 146mm(D) ; 2.7"(W) x 2.2"(H) x 5.7"(D)  
Weight  
0.4 kg ; 0.9 lbs  
Operating Temperature  
Certifications  
0°C~45°C ; 32°F~113°F (20%~80% Humidity)  
FCC/CE  
1.4 Dimensions  
- 3 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
2. NAMES AND FUNCTIONS OF PARTS  
2.1 Front panel  
Light Sensor  
TAKE CARE NOT TO OBSTRCUT THIS OPENING  
WITH THE BODY OF THE LENS!  
The light sensor is for optional control of D/N switching levels in some applications. See section 5.6 for  
details.  
2.2 Top/Bottom Mounting  
Using the two phillips head screws provided, the mounting bracket may be mounted to the top of  
the camera body for suspending the camera; or, the brackets may be mounted to the bottom of the  
camera body to support the camera.  
Bottom Bracket  
Top Bracket  
- 4 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
2.3 Back panel and connections  
1
2
3
6
5
4
7
1
OSD Menu joystick: Use the joystick to move the cursor Upwards/Downwards. This is used to  
select the item to be set. Tilt the stick to the right or left. This is used to select or adjust the  
parameters of the selected item. Press in on the stick to enter the setup menu.  
2
TV-Out  
Connect to the TV-input of the Monitor by using a RCA connector.  
3
HD-SDI Output: High-definition serial digital interface (BNC connector type). Connect to a video  
device through a 75 Ohm type coaxial cable to the BNC female connector at the rear of the camera.  
4
Video Out: a switch to select which video output is used for connection.  
5
Power Input Terminal: Connect 12VDC/24VAC power.  
- 5 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
6
Power LED: The power LED lights up when power is ON.  
7
DC Auto Iris Lens Connector: This connector is used to connect with the DC type auto iris lens  
using a standard 4 pin male connector  
Pin 1 Pin 2 Pin 3  
Cnt- Cnt+ Drv+  
Pin 4  
Drv-  
3
1
4
2
Direct Drive  
3. INSTALLATION  
1. Unscrew/remove the cover cap from the lens mount.  
2. If C mount lens is used, please add the C adaptor mount ring (the 5mm thick ring in  
the accessory pack) between the lens and the mount. Please note: Failure to use a  
spacer ring when attaching a C mount lens can damage the camera!  
3. Mount the lens by turning it clockwise into the lens mount.  
4. If you use an Auto Iris lens, connect the lens cable to the auto iris lens connector on  
the side of the camera.  
5. After mounting and connecting the camera, when making final focus adjustments,  
remove the protective sheets from both sides of the ND filter provided; place the ND  
filter in front of the lens to force the lens iris to open; then adjust the lens focus until  
the best image is obtained.  
6. Lock the lens focus by turning any clamping screws provided on the lens, then  
remove the ND filter.  
Mounting the lens  
-----------------5mm C Mount spacer (optional) shown  
Light Sensor  
o--------------------  
TAKE CARE NOT TO OBSTRUCT THIS OPENING  
WITH THE BODY OF THE LENS!  
- 6 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4. OSD Menu & Configuration  
Access the user setup menu screen:  
I.  
Press inward on the end of the joystick  
The menu screen will appear on the monitor.  
II.  
Navigating with the joystick  
Angle the joystick or to move the cursor up or down. Angle the joystick or to  
adjust the mode or value of a setting.  
III.  
IV.  
Switching to sub-menu screens  
When an item with sub-menu is selected, press inward on the end of the joystick to  
switch to the sub-menu for further settings.  
Return to previous page  
Press the SET button to return to previous page if the choice displayed is Return.  
- 7 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Menu Tree  
Lens  
— Manual ; DC  
Shutter  
— Auto ; 1/50 ; 1/60 ; 1/100 ; 1/120 ; 1/250 ; 1/500 ; 1/700 ;  
1/1000 ; 1/1600 ; 1/2500 ; 1/5000 ; 1/8000  
Iris  
— 0.0EV ; +0.5EV ; +1.0EV ; +1.5EV ; +2.0EV ; -0.5EV ;  
-1.0EV ; -1.5EV ; -2.0EV  
Exposure  
AGC  
— High ; Middle ; Low ; Off  
— On ; Off  
BLC  
Anti-Flicker  
Return  
— Auto ; 50Hz ; 60Hz  
Auto WB  
One push WB  
Red  
— 0~100  
— 0~100  
White Balance  
Manual  
Blue  
Return  
Indoor  
Outdoor  
Return  
Auto  
Day/Night  
Color  
Black/White  
Return  
1080i  
Resolution  
720p  
Display On / Display Off  
Return  
On  
Camera Title  
Off  
Return  
Mirror  
Gamma  
— H_MIR ; V_MIR ; OFF  
— 0.45~1.00  
Special  
D-Effect  
- 8 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Neg_Image  
Return  
— On ; Off  
TV Out  
— NTSC ; PAL ; Return  
English  
German  
Russian  
Language  
French  
Spanish  
Trad. Chinese  
Simp. Chinese  
Japanese  
Return  
Default  
— Yes ; No  
Return  
Sharpness  
Brightness  
Contrast  
— 1~5  
Image Adjust  
Return  
— 1~31  
— 1~31  
- 9 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press Set button to enter SETUP Menu. In SETUP menu, use the joystick to make settings. User  
can do camera settings including Exposure, White balance, Day/Night, Special and Image adjust.  
Please select the item by moving the joystick UP or DOWN then press SET to enter the settings.  
Move the joystick to the last option which is “Return” to return to live view.  
4.1 Exposure  
In this section, user can do camera settings including Lens, Shutter, Iris, AGC, BLC and Anti-flicker.  
Please select the item by moving the joystick UP or DOWN. Select Return” to return to the previous  
menu.  
4.1.1 Lens  
Select the type of the lens used (Manual/DC type) by moving the joystick LEFT or RIGHT.  
NOTE:  
The brightness of the screen can be adjusted in DC mode in Lens Level. The level can be adjusted  
from 1 to 31.  
4.1.2 Shutter  
Select the shutter mode by moving the joystick LEFT or RIGHT.  
Select from Auto,1/50,1/60,1/100,1/120,1/250,1/500,1/700,1/1000,1/1600,1/2500,1/5000 and 1/8000.  
NOTE:  
When selecting a DC lens, the shutter speed is fixed as 1/60 for NTSC and 1/50 for PAL.  
4.1.3 Iris  
Select the iris mode by moving the joystick LEFT or RIGHT.  
The level can be adjusted from 0.0EV, +0.5EV, +1.0EV, +1.5EV, +2.0EV, -0.5EV, -1.0EV, -1.5EV and  
-2.0EV.  
4.1.4 AGC (Auto Gain Control – basic low light signal amplification)  
Select the level you would like to choose by moving the joystick LEFT or RIGHT. The more the level of  
gain increases, the brighter the screen, but the level of noise increases as well. Please select from High,  
Middle, Low and Off.  
4.1.5 BLC  
Select On” or “Off” by moving the joystick LEFT or RIGHT. Video gain can be adjusted automatically to  
correct the exposure of subjects that are in front of a bright light source.  
- 10 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
4.1.6 Anti-Flicker  
Selections are Auto, 50Hz and 60Hz. Camera will auto adjust the shutter to reduce the flicker caused by  
fluorescent light when manual lens is used.  
4.2 White Balance Control  
The screen color can be adjusted by using the White Balance function.  
Please select one of the 5 modes below by moving the joystick UP or DOWN then press Set” button to  
save the setting:  
AWB  
This mode can be used within the color temperature range from 2,500°K to 10,000°K.  
One Push WB  
Enable one push trigger for white balance mode. This holds the white balance at a specific color  
temperature until the next command trigger is given.  
Manual  
The manual adjustment mode enables a more precise adjustment. Set the suitable color  
temperature, and increase or decrease the red and blue color values at the same time while  
checking the color changes of the objects in view.  
Return: Select Return” to saves all settings in this menu and returns to the previous menu.  
Indoor  
Select this option when the color temperature is 4,000°K.  
Outdoor  
Select this option when the color temperature is 5,000~6,500°K.  
Select Return” to return to the previous menu.  
4.3 Day/Night  
These settings control the operation of the camera when the illumination level changes. Choices are  
Color at all times; B/W at all times; or color when illumination is bright, switching to B/W in low light.  
Please select one of the 3 modes below by moving the joystick UP or DOWN then press Set” button to  
save the setting:  
AUTO: The picture switches to color in a normal (bright) environment and switches to B/W  
when the ambient illumination is low. The switching point is determined by the AGC level.  
COLOR: The picture is always displayed in color, even at low light levels.  
B/W: The picture is always displayed in B/W.  
Select Return” to return to the previous menu.  
- 11 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
NOTE:  
AGC selection must be set as middle or high in order to employ the auto switching function.  
4.4 Special  
In this section, user can do special settings including Resolution, Camera Title, D-Effect, TV-Out,  
Language and Default. Please select the item by moving the joystick UP or DOWN then press SET to  
enter the settings. Select Return” to return to the previous menu.  
4.4.1 Resolution  
1. Select camera resolution from 1920x1080i and 1280x720p by moving the joystick UP or DOWN  
then press Set” button to save the setting  
2. Display On: Press Set” to switch between On/Off, whether to show current resolution.  
Select Return” to return to the previous menu.  
4.4.2 Camera Title  
Select On” by moving the joystick UP or DOWN then press Set” to enter the setting. Input a camera  
title by moving the joystick UP and Down, cursor will navigate among characters and numbers. The  
available letters are A-Z and 0-9. Press Set” key to confirm. Move the joystick Left and Right to move  
the cursor among the same level.  
Select Off” by moving the joystick UP or DOWN then press Set” to disable the camera title display.  
Select Return” to return to the previous menu.  
4.4.3 D-Effect  
In this section, user can do camera settings including Mirror, Gamma and Neg_Image. Please select  
the item by moving the joystick UP or DOWN. Select Return” to return to the previous menu.  
4.4.3.1 Mirror  
Select one of the 3 modes below by moving the joystick LEFT or RIGHT.  
-Off: Disable the effects.  
-H-MIR: Sets a horizontal image inversion.  
-V-MIR: Set a vertical image inversion.  
4.4.3.2 Gamma  
Select the Gamma level by moving the joystick LEFT or RIGHT.  
The level can be adjusted from 0.45 up to 1.0.  
- 12 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
4.4.3.3 NEG_IMAGE  
Select Neg_Image On or Off by moving the joystick LEFT or RIGHT. Allows user to create a negative of  
the original image. A negative image is a tonal inversion of a positive image, in which light areas appear  
dark and vice versa. A negative color image is additionally color reversed, with red areas appearing  
cyan, greens appearing magenta and blues appearing yellow.  
4.4.4 TV standard  
Select video format of TV standard by moving the joystick UP or DOWN then press Set” button to save  
the setting. Selectable from NTSC and PAL format.  
Select Return” to return to the previous menu.  
4.4.5 Language  
Select OSD language. EQH5200 camera supports multiple languages including English, German,  
Russian, French, Spanish, Traditional Chinese, Simplified Chinese and Japanese. Move the joystick UP  
or DOWN to select a language then press Set” button to save the setting.  
Select Return” to return to the previous menu.  
4.4.6 Default  
Select Yes” to load system settings to default factory values. Or select No” to disregard this option.  
4.5 Image Adjust  
In this section, user can adjust Sharpness, Brightness and Contrast of the image. Please select the item  
by moving the joystick UP or DOWN. Select Return” to return to the previous menu.  
4.5.1 Sharpness  
Select the sharpness level by moving the joystick LEFT or RIGHT. The contour of the video image  
becomes cleaner and more easily distinguished as the level of Sharpness increases. If the level is set  
too high, it may affect the video image and cause noise. The available range of level is 1~5.  
4.5.2 Brightness  
Select the brightness level by moving the joystick LEFT or RIGHT. To increase or decrease object  
brightness of images. It is adjustable from 1~31.  
4.5.3 Contrast  
Select the contrast level by moving the joystick LEFT or RIGHT. To increase or decrease object contrast  
of images. It is adjustable from 1~31.  
- 13 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Headquarter Office  
Beijing office  
12F, No.79 Sec.1 Shin-Tai Wu Road,  
Hsi-Chi, Taipei, Taiwan  
Tel: +886-2-26982334  
Room 609,Technology Trade Building.  
Shangdi Information Industry Base,  
Haidian District,Beijing China  
Tel: +86-10-62971096  
Fax: +886-2-26982380  
Fax: +86-10-62971423  
European Office  
Japan Office  
Albert-Einstein-Strasse 1,  
D-46446 Emmerich, Germany  
Tel: +49-2822-9394-0  
Fax: +49-2822-939495  
5F Kinshicho City Building2-13-4 Koto-bashi,  
Sumida-KuTokyo130-0022Japan  
Tel: +81-3-5625-8188  
Fax: +81-3-5625-8189  
USA California Office  
1801 Highland Ave. Unit A  
Duarte, CA 91010 ,U.S.A  
Tel: +1-626-844-8888  
Fax: +1-626-844-8838  
USA New York Office  
415 Oser Ave Unit S  
Hauppauge, NY 11788  
Sales: +1-631-436-5070  
Fax: +1-631-436-5027  
India Office  
Suite 803, 8th Floor,  
Housefin Bhavan,  
C-21 Bandra Kurla Complex,  
Bandra (East), Mumbai 400 051  
Tel: +91 22 6128-8700  
Ihr EverFocus Produkt wurde entwickelt und  
Your EverFocus product is designed and  
hergestellt  
mit  
qualitativ  
hochwertigen  
manufactured with high quality materials and  
components which can be recycled and reused.  
This symbol means that electrical and electronic  
equipment, at their end-of-life, should be  
disposed of separately from your household  
waste.  
Materialien und Komponenten, die recycelt und  
wieder verwendet werden können.  
Dieses Symbol bedeutet, dass elektrische und  
elektronische  
Geräte  
am  
Ende  
ihrer  
Nutzungsdauer vom Hausmüll getrennt  
entsorgt werden sollen.  
Please, dispose of this equipment at your local  
community waste collection/recycling centre.  
In the European Union there are separate  
collection systems for used electrical and  
electronic product.  
Please, help us to conserve the environment we  
live in!  
Bitte entsorgen Sie dieses Gerät bei Ihrer  
örtlichen kommunalen Sammelstelle oder im  
Recycling Centre.  
Helfen Sie uns bitte, die Umwelt zu erhalten, in  
der wir leben!  
P/N: 4605XQ5200001AR  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Code Alarm Remote Starter CA 440SS User Manual
Continental Electric Toaster CE23551 User Manual
Corega Headphones BTHS02 User Manual
Cuisinart Food Processor FP 12DC User Manual
Delfield Refrigerator UC4460N 12M User Manual
Eagle Electronics Portable Radio EVR 150 User Manual
Eclipse Fujitsu Ten Laptop D2140 User Manual
Edelbrock Automobile Parts 17932 User Manual
Fisher Paykel Microwave Oven CMOH30SS User Manual
Garland Gas Grill XG24 JIB User Manual