Cisco Systems Network Card PPWR DCARD 16ESW User Manual

Installing Power Boards in Cisco Ethernet

Switch Network Modules

Product Numbers: PPWR-DCARD-16ESW, PPWR-DCARD-36ESW

This document describes how to install the optional power board for the Cisco Ethernet switch network

module if external -48V power for IP telephones is required.

Network module installation documents provide detailed instructions for network module installation

and cabling. You can access these documents at: Cisco Product Documentation > Access Servers and

Access Routers > Modular Access Routers > Cisco platform you are using> Hardware installation

documents for Cisco platform you are using > Network module (netmod) installation

This document contains the following sections:

•

Safety Information, page 1

Tools and Equipment Needed, page 2

Adding an Optional Power Board, page 2

Obtaining Documentation, page 4

Obtaining Technical Assistance, page 5

Safety Information

For safety information you need to know before working on your Cisco router, see the Regulatory

Compliance and Safety Information document that accompanied this device.

Warning

Caution

Only trained and qualified personnel should be allowed to install or replace this equipment. To see

translations of the warnings that appear in this publication, refer to the Regulatory Compliance and

Safety Information document that accompanied this device.

Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry. Always follow ESD

prevention procedures when removing and replacing cards.

Co rp o ra t e He a d q u a rt e rs :

Cis c o S ys t e m s , In c ., 1 7 0 We s t Ta s m a n Drive , S a n J o s e , CA 9 5 1 3 4 -1 7 0 6 US A

Download from Www.Somanuals.com. All Manuals Search And Download.

Adding an Optional Power Board

Warning

Step 7

Do not connect the external power supply cable to the power connector on the front of the network

module until the network module has been inserted into the router chassis. To see translations of

the warnings that appear in this publication, refer to the Regulatory Compliance and Safety

Information document that accompanied this device.

After installing the network module into the chassis, connect the power cable to the power module

connector on the front of the network module. See the Cisco External Power Supply for Cisco Ethernet

Switch Network Modules Installation Guide for more information.

Figure 2

Installing a Power Board in a 16-Port Ethernet Sw itch Network Module

NM-

ESW-

15x

FastEthernet Ports

15x

14x

13x

12x

11x

10x

Ext

Pwr

-48V

10/100/

1000

Base-Tx

Installing Power Boards in Cisco Ethernet Switch Network Modules

78-14282-02

Download from Www.Somanuals.com. All Manuals Search And Download.

Obtaining Documentation

Figure 3

Installing a Power Board in a 36-Port Ethernet Sw itch Network Module

NMD-

ESW-

35x

GE1

10/100/1000

Base-Tx

17x

35x

17x

34x

16x

33x

15x

32x

14x

31x

FastEthernet Ports

13x

30x

12x

29x

11x

28x

10x

27x

26x

25x

24x

23x

22x

18x

21x

20x

19x

Ext

Pwr

-48V

18x

10/100/

1000

Base-Tx

Obtaining Documentation

The following sections provide sources for obtaining documentation from Cisco Systems.

World Wide Web

You can access the most current Cisco documentation on the World Wide Web at the following sites:

•

http://www.cisco.com

http://www-china.cisco.com

http://www-europe.cisco.com

Installing Power Boards in Cisco Ethernet Switch Network Modules

78-14282-02

Download from Www.Somanuals.com. All Manuals Search And Download.

Obtaining Technical Assistance

Documentation CD-ROM

Cisco documentation and additional literature are available in a CD-ROM package, which ships

with your product. The Documentation CD-ROM is updated monthly and may be more current than

printed documentation. The CD-ROM package is available as a single unit or as an annual subscription.

Ordering Documentation

Cisco documentation is available in the following ways:

•

Registered Cisco Direct Customers can order Cisco Product documentation from the Networking

Products MarketPlace:

http://www.cisco.com/cgi-bin/order/order_root.pl

Registered Cisco.com users can order the Documentation CD-ROM through the online Subscription

Store:

http://www.cisco.com/go/subscription

Nonregistered Cisco.com users can order documentation through a local account representative by

calling Cisco corporate headquarters (California, USA) at 408 526-7208 or, in North America, by

calling 800 553-NETS(6387).

Documentation Feedback

If you are reading Cisco product documentation on the World Wide Web, you can submit technical

comments electronically. Click Feedback in the toolbar and select Documentation. After you complete

the form, click Submit to send it to Cisco.

You can e-mail your comments to [email protected].

To submit your comments by mail, use the response card behind the front cover of your document, or

write to the following address:

Attn Document Resource Connection

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, CA 95134-9883

We appreciate your comments.

Obtaining Technical Assistance

Cisco provides Cisco.com as a starting point for all technical assistance. Customers and partners can

obtain documentation, troubleshooting tips, and sample configurations from online tools. For Cisco.com

registered users, additional troubleshooting tools are available from the TAC website.

Installing Power Boards in Cisco Ethernet Switch Network Modules

78-14282-02

Download from Www.Somanuals.com. All Manuals Search And Download.

Obtaining Technical Assistance

Cisco.com

Cisco.com is the foundation of a suite of interactive, networked services that provides immediate, open

access to Cisco information and resources at anytime, from anywhere in the world. This highly

integrated Internet application is a powerful, easy-to-use tool for doing business with Cisco.

Cisco.com provides a broad range of features and services to help customers and partners streamline

business processes and improve productivity. Through Cisco.com, you can find information about Cisco

and our networking solutions, services, and programs. In addition, you can resolve technical issues with

online technical support, download and test software packages, and order Cisco learning materials and

merchandise. Valuable online skill assessment, training, and certification programs are also available.

Customers and partners can self-register on Cisco.com to obtain additional personalized information and

services. Registered users can order products, check on the status of an order, access technical support,

and view benefits specific to their relationships with Cisco.

To access Cisco.com, go to the following website:

http://www.cisco.com

Technical Assistance Center

The Cisco TAC website is available to all customers who need technical assistance with a Cisco product

or technology that is under warranty or covered by a maintenance contract.

Contacting TAC by Using the Cisco TAC Website

If you have a priority level 3 (P3) or priority level 4 (P4) problem, contact TAC by going to the TAC

website:

http://www.cisco.com/tac

P3 and P4 level problems are defined as follows:

•

P3—Your network performance is degraded. Network functionality is noticeably impaired, but most

business operations continue.

•

P4—You need information or assistance on Cisco product capabilities, product installation, or basic

product configuration.

In each of the above cases, use the Cisco TAC website to quickly find answers to your questions.

To register for Cisco.com, go to the following website:

http://www.cisco.com/register/

If you cannot resolve your technical issue by using the TAC online resources, Cisco.com registered users

can open a case online by using the TAC Case Open tool at the following website:

http://www.cisco.com/tac/caseopen

Contacting TAC by Telephone

If you have a priority level 1 (P1) or priority level 2 (P2) problem, contact TAC by telephone and

immediately open a case. To obtain a directory of toll-free numbers for your country, go to the following

website:

http://www.cisco.com/warp/public/687/Directory/Dir T AC.shtml

Installing Power Boards in Cisco Ethernet Switch Network Modules

78-14282-02

Download from Www.Somanuals.com. All Manuals Search And Download.

Obtaining Technical Assistance

P1 and P2 level problems are defined as follows:

•

P1—Your production network is down, causing a critical impact to business operations if service is

not restored quickly. No workaround is available.

•

P2—Your production network is severely degraded, affecting significant aspects of your business

operations. No workaround is available.

Use this document with the Cisco 2600 Series, 3600 Series, and 3700 Series Regulatory Compliance and Safety Information document.

CCIP, the Cisco Powered Network mark, the Cisco Systems Verified logo, Cisco Unity, Fast Step, Follow Me Browsing, FormShare, Internet Quotient, iQ Breakthrough, iQ

Expertise, iQ FastTrack, the iQ Logo, iQ Net Readiness Scorecard, Networking Academy, ScriptShare, SMARTnet, TransPath, and Voice LAN are trademarks of Cisco Systems,

Inc.; Changing the Way We Work, Live, Play, and Learn, Discover All That’s Possible, The Fastest Way to Increase Your Internet Quotient, and iQuick Study are service marks of

Cisco Systems, Inc.; and Aironet, ASIST, BPX, Catalyst, CCDA, CCDP, CCIE, CCNA, CCNP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, the Cisco IOS logo,

Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Empowering the Internet Generation, Enterprise/Solver, EtherChannel, EtherSwitch, GigaStack, IOS,

IP/TV, LightStream, MGX, MICA, the Networkers logo, Network Registrar, Packet, PIX, Post-Routing, Pre-Routing, RateMUX, Registrar, SlideCast, StrataView Plus, Stratm,

SwitchProbe, TeleRouter, and VCO are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries.

All other trademarks mentioned in this document or Web site are the property of their respective owners. The use of the word partner does not imply a partnership relationship

between Cisco and any other company. (0201R)

Installing Power Boards in Cisco Ethernet Switch Network Modules

78-14282-02

Download from Www.Somanuals.com. All Manuals Search And Download.

Obtaining Technical Assistance

Installing Power Boards in Cisco Ethernet Switch Network Modules

78-14282-02

Download from Www.Somanuals.com. All Manuals Search And Download.

BenQ Projector W1070 User Manual
Blue Rhino Charcoal Grill CBC842W User Manual
BOB Stroller MA0270 User Manual
Bolens Tiller 219 386A User Manual
Bosch Power Tools Cordless Saw 1659 User Manual
Braun Electric Toothbrush Vitality User Manual
Carbine Automobile Accessories PLUS 5900 User Manual
Casio Digital Camera EX ZR300 User Manual
Casio Digital Camera QV 770 User Manual
Cisco Systems IP Phone 7900 Series User Manual