Chief Manufacturing TV Mount PAC516 User Manual

I N S T A L L A T I O N I N S T R U C T I O N S  
Instrucciones de instalación  
Installationsanleitung  
Istruzioni di installazione  
Installatie-instructies  
Instruções de Instalação  
Instructions d´installation  
IN-WALL ACCESSORY BOX  
Spanish Product Description  
German Product Description  
Portuguese Product Description  
Italian Product Description  
Dutch Product Description  
French Product Description  
PAC516  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation Instructions  
PAC516  
DIMENSIONS  
A
B
28.4  
1.12  
55.9  
2.20  
368.3  
14.50  
87  
3.43  
94.7  
3.73  
DETAIL A  
SC ALE 1 : 1  
393.7  
15.50  
44  
1.734  
28.2  
1.109  
8.3  
0.33  
22.2  
0.875  
31.8  
1.25  
DETAIL B  
SC ALE 1 : 1  
154.9  
6.10  
MEASUREMENTS: [MILLIMETERS]  
INCHES  
LEGEND  
Tighten Fastener  
Pencil Mark  
Apretar elemento de fijación  
Befestigungsteil festziehen  
Apertar fixador  
Marcar con lápiz  
Stiftmarkierung  
Marcar com lápis  
Segno a matita  
Potloodmerkteken  
Marquage au crayon  
Serrare il fissaggio  
Bevestiging vastdraaien  
Serrez les fixations  
Loosen Fastener  
Drill Hole  
Aflojar elemento de fijación  
Befestigungsteil lösen  
Desapertar fixador  
Perforar  
Bohrloch  
Fazer furo  
Praticare un foro  
Gat boren  
Allentare il fissaggio  
Bevestiging losdraaien  
Desserrez les fixations  
Percez un trou  
Phillips Screwdriver  
Hex-Head Wrench  
Destornillador Phillips  
Llave de cabeza hexagonal  
Sechskantschlüssel  
Chave de cabeça sextavada  
Chiave esagonale  
Kreuzschlitzschraubendreher  
Chave de fendas Phillips  
Cacciavite a stella  
Kruiskopschroevendraaier  
Tournevis à pointe cruciforme  
Zeskantsleutel  
Clé à tête hexagonale  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
PAC516  
Installation Instructions  
TOOLS REQUIRED FOR INSTALLATION  
3/16"  
M4  
(included)  
PARTS  
Grounding screw and washer installed at factory  
(See Figure 4 on page 6.)  
J (2)  
#10  
H (2)  
10-32 x 3/8"  
Earthing symbol IEC 60418 No. 5019  
affixed adjacent to grounding terminal.  
A (1)  
PAC516  
1
B (4)  
1/4"  
C (6)  
[Wire Tie Clip]  
2
D (1)  
M4  
G (4)  
1/4" x 2"  
E (8)  
1/8-18 x 3/4"  
F (4)  
M7 x 40mm  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation Instructions  
PAC516  
INSTALLATION  
The PAC516 is intended for use in installations where the wall  
surface has not been finished and the structure (studs) is  
exposed. The PAC516 requires the wall be finished around the  
opening of the box after the box has been installed.  
PAC516  
Cut Out Area  
WARNING: IMPROPER INSTALLATION CAN RESULT IN  
DEATH OR SERIOUS PERSONAL INJURY! This accessory  
should be installed by qualified personnel.  
PAC-516 Site Preparation  
Locate and Prepare Mounting Site  
1. Identify a suitable wall location for the accessory.  
IMPORTANT ! : The PAC516 is designed for in-wall  
installation between two wood or steel studs, 16" on  
center. Inadequate space will remain on each side  
between studs for electrical wires/cables, plumbing,  
ductwork, or insulation. Locate accordingly!  
WARNING: ELECTRICAL SHOCK HAZARD! CUTTING  
OR DRILLING INTO ELECTRICAL WIRES OR CABLES  
CAN CAUSE DEATH OR SERIOUS PERSONAL INJURY!  
ALWAYS make certain area behind mounting surfaces is free  
of electrical wires and cables before cutting, drilling, or  
installing fasteners.  
Figure 1  
Accessory Box Installation  
WARNING: EXPLOSION AND FIRE HAZARD! CUTTING  
OR DRILLING INTO GAS PLUMBING CAN CAUSE DEATH  
OR SERIOUS PERSONAL INJURY! ALWAYS make certain  
area behind mounting surfaces is free of gas, water, waste, or  
any other plumbing before cutting, drilling, or installing  
fasteners.  
1. Insert PAC516 (A) into opening. (See Figure 2)  
2. Using a stud sensor, locate and mark studs.  
3. Center and level housing between marked studs.  
4. Using housing as a template, draw pencil line completely  
around housing.  
NOTE: Housing is designed to fit between and directly against  
two adjacent wall studs.  
5. Using a measuring tool, measure the marked area and  
compare to the dimensions below. If measurements match,  
continue to Step 6. If not, adjust markings to match  
dimensions below. (See Figure 1)  
6. Cut drywall on outside edge of line and remove.  
(A)  
Figure 2  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
PAC516  
Installation Instructions  
WARNING: ELECTRICAL SHOCK HAZARD! CUTTING  
OR DRILLING INTO ELECTRICAL WIRES OR CABLES  
CAN CAUSE DEATH OR SERIOUS PERSONAL INJURY!  
ALWAYS make certain area behind mounting surfaces is free  
of electrical wires and cables before cutting, drilling, or  
installing fasteners.  
DANGER: IMPROPER WIRING CAN LEAD TO DEATH  
OR SEVERE PERSONAL INJURY! Grounding must be  
installed by qualified personnel using a UL Recognized No.  
12AWG Green and Yellow grounding wire connected to  
grounding lug on mount.  
2. Secure accessory box to studs by:  
WOOD STUD:  
1. Drill four 3/16" dia. pilot holes in studs at mounting  
holes. (See Figure 3)  
1
2. Install four M7 x 40mm Allen head connector screws  
(F) into pilot holes using an M4 Allen head drill bit  
(D). (See Figure 3)  
2
STEEL STUD:  
1. Drill four 3/16" dia. pilot holes in studs at mounting  
holes. (See Figure 3)  
2. Install four 1/4" countersunk finishing washers (B)  
and four 1/4" x 2" Phillips flat head self drilling  
screws (G) into pilot holes. (See Figure 3)  
Typical  
Grounding lug location  
Figure 4  
x 4  
1
Installing Accessories  
Accessories can be mounted directly to the PAC516 by using  
the mounting screws provided and the mounting holes  
integrated into the box.  
To mount an accessory:  
1. Identify area within accessory box where accessory is to be  
mounted.  
2. Align the mounting holes in accessory with mounting holes  
in box.  
3. Secure accessory to box using Phillips screwdriver and as  
many 1/8-18 x 3/4" mounting screws (E) as required. (See  
Figure 5)  
4. Use the wire tie clips (C), as necessary, for cable  
management. (See Figure 5)  
(F) x 4  
2
(B) x 4  
(Steel Stud Only)  
(G) x 4  
(Steel Stud Only)  
2
Figure 3  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation Instructions  
PAC516  
(C)  
3
(E) (8 provided)  
Figure 5  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
PAC516  
Installation Instructions  
USA/International  
Europe  
A
P
F
A
P
F
6436 City West Parkway, Eden Prairie, MN 55344  
800.582.6480 / 952.225.6000  
877.894.6918 / 952.894.6918  
Franklinstraat 14, 6003 DK Weert, Netherlands  
+31 (0) 495 580 852  
Chief Manufacturing, a products division  
of Milestone AV Technologies  
+31 (0) 495 580 845  
Asia Pacific  
A
Office No. 1 on 12/F, Shatin Galleria  
18-24 Shan Mei Street  
8807-002009 Rev01  
¤2012 Milestone AV Technologies,  
a Duchossois Group Company  
09/12  
Fotan, Shatin, Hong Kong  
852 2145 4099  
852 2145 4477  
P
F
Download from Www.Somanuals.com. All Manuals Search And Download.  

Bloomfield Coffeemaker 8573 w optional 8900 Series Decanters User Manual
Bock Water heaters Water Heater 66W 399 User Manual
Bosch Power Tools Grinder 1365 User Manual
Bosch Power Tools Stud Sensor DMD4 User Manual
Brother All in One Printer Multi Protocol Print Server User Manual
Bushnell Hunting Equipment 1X User Manual
Cabletron Systems Switch 2H28 08R User Manual
Cecilware Kitchen Grill SG 1SG User Manual
Cisco Systems Life Jacket SG200 User Manual
Cisco Systems Network Card VIP4 User Manual