LCD COLOR TELEVISION
W270F8E
W320F8E
W370F8E
OPERATION MANUAL
Please read this manual carefully before operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
All the features and specifications are subject to change without notice for improvement.
W320F8E/W370F8E
JUJ6.491.1152
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
Electrical energy can perform many useful functions, but it can also cause personal injuries and property
damage if improperly handled. This product has been engineered and manufactured with the highest
priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE
HAZARD. In order to prevent potential danger, please observe the following instructions when installing,
operating and cleaning the product. To ensure your safety and prolong the service life of your LCDTV
product, please read the following precautions carefully before using the product.
1. Read these instructions---All operating instructions must be read and understood before the product
is operated.
2. Keep these instructions---These safety and operating instructions must be kept in a safe place for
future reference.
3. Heed all warnings--- All warnings on the product and in the instructions must be observed closely.
4. Follow all instructions---All operating instructions must be followed.
5. Attachments---Only use attachments/accessories specified by the manufacturer. Do not use
attachments not recommended by the manufacturer. Use of improper attachments can result in
accidents.
6. Power source---This product is intended to be supplied by a listed power supply indicated on the
marking label. If you are not sure of the type of power supply to your home, consult your product dealer
or local power company. For added protection for this product during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable
system.
7. Power cord protection ---Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
8. Overloading---Do not overload wall outlets, extension cords, or convenience receptacles on other
equipment as this can result in a risk of fire or electric shock.
9. Entering of objects and liquids---Never insert an object into the product through vents or openings.
High voltage flows in the product, and inserting an object can cause electric shock and/or short internal
parts. For the same reason, do not spill water or liquid on the product.
10. Servicing---Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
11. Damage requiring service---If any of the following conditions occurs, unplug the power cord from the
AC outlet, and request a qualified service person to perform repairs.
a. When the power cord or plug is damaged.
b. When a liquid is spilled on the product or when objects have fallen into
the product.
c. When the product has been exposed to rain or water.
d. When the product does not operate properly as described in the
operating instructions.
Do not touch the controls other than those described in the operating
instructions. Improper adjustment of controls not described in the
instructions can cause damage, which often requires extensive
adjustment work by a qualified technician.
e. If the product has been dropped or the cabinet has been damaged in any way.
PAGE 1
Download from Www.Somanuals.com. All Manuals Search And Download.
f. When the product displays an abnormal condition or exhibits a distinct change in performance. Any
noticeable abnormality in the product indicates that the product needs servicing.
12. Replacement parts---In case the product needs replacement parts, make sure that the service person
uses replacement parts specified by the manufacturer, or those with the same characteristics and
performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or
other danger.
13. Safety checks---Upon completion of service or repair work, request the service technician to perform
safety checks to ensure that the product is in proper operating condition.
14. Wall mounting---be sure to install the product according to the method recommended by the
manufacturer. This is a safety feature.
15. Stand---Use only with the cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. Do not place the
product on an unstable trolley, stand, tripod or table. Placing the product
on an unstable base can cause the product to fall, resulting in serious
personal injuries as well as damage to the product. When mounting the
product on a wall, be sure to follow the manufacturer’s instructions. Use
only the mounting hardware recommended by the manufacturer.
16. Careful move---When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over. Sudden stops,
excessive force and uneven floor surfaces can cause the product to fall
from the trolley.
17. Lightning---Unplug this apparatus during lightning storms or when
unused for long periods of time.
For added protection for this television equipment during a lightning storm,
or when it is left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the antenna. This will prevent damage
to the equipment due to lightning and power-line surges.
18. Do not use this apparatus near water---for example, near a bathtub,
washbowl, kitchen sink, or laundry tub, in a wet basement, or near a
swimming pool, and the like.
Do not use immediately after moving from a low temperature to high
temperature environment, as this causes condensation, which may
result in fire, electric shock, or other hazards.
19. Clean only with dry cloth---Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
20. Ventilation---Do not block any ventilation openings. Install in accordance
with the manufacturer instructions. The vents and other openings in the
cabinet are designed for ventilation. Do not cover or block these vents
and openings since insufficient ventilation can cause overheating and/or
shorten the life of the product. Do not place the product on a bed, sofa,
rug or other similar surface, since they can block ventilation openings.
This product is not designed for built-in installation; do not place the
product in an enclosed place such as a bookcase or rack, unless proper
ventilation is provided or the manufacturer’s instructions are followed.
21.Heat sources---Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
22.Panel protection---The LCD panel used in this product is made of glass.
PAGE 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Therefore, it can break when the product is dropped or impacted upon by
other objects. Be careful not to be injured by broken glass pieces in case
the LCD panel breaks.
23.Pixel defect---The LCD panel is a very high technology product, giving
you finely detailed pictures. Occasionally, a few non-active pixels may
appear on the screen as a fixed point of blue, green or red. Please note
that this does not affect the performance of your product.
mportant Safety Instructions
Using the Remote Control
●Use the remote control by pointing it towards the remote sensor window
of the set. Objects between the remote control and sensor window may
prevent proper operation. Cautions regarding use of remote control
Note: the illustration is for your reference only, the remote sensor may
locate differently with different model.
Cautions regarding use of remote control
● Do not expose the remote control to shock. In addition, do not expose the remote control to
liquids, and do not place in an area with high humidity.
● Do not install or place the remote control under direct sunlight. The heat may cause
deformation of the unit.
●The remote control may not work properly if the remote sensor window of the main unit is under
direct sunlight or strong lighting. In such a case, change the angle of the lighting or LCD TV set, or
operate the remote control closer to the remote sensor window.
Batteries for Remote Control
S
If the remote control fails to operate the LCDTV functions, replace the batteries in the remote control.
1 Open the battery cover.
2 Insert two size-AAA batteries.
● Place the batteries with their terminals corresponding to the (+) and (-)
indications in the battery compartment.
3 Replace the cover until the lock clicks.
Precaution on battery use
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the
instructions below.
● Place batteries with their terminals corresponding to the (+) and (–) indications.
● Different types of batteries have different characteristics. Do not mix batteries of different types.
● Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries
and/or cause old batteries to leak chemicals.
● Remove batteries as soon as they are non-operable. Chemicals that leak from batteries can cause a
rash. If chemical leakage is found, wipe with a cloth.
● The batteries supplied with the product may have a shorter life expectancy due to storage conditions.
PAGE 3
Download from Www.Somanuals.com. All Manuals Search And Download.
If the remote control is not used for an extended period of time, remove the batteries from the remote
control.
PACKING LIST
LCD TV
1
1
1
1
2
1
1
Operation Manual
Infrared Remote Control
AC Power Cable
AAA Batteries
Warranty Card
Audio Convert Cable
Note:
Please keep the wrapping box and the padding well for future convenient use when you
convey them.
GENERAL INFORMATION
„
Radio Frequency input; support CATV
Capable of receiving cable programs in 470MHZ
AV input
„
Capable of receiving PAL, SECAM color systems; Convenient to watch VCR (video
cassette recorder), Pickup Camera, other Disc’s programs
TV output
„
„
„
There is always TV signal output under whichever signal source
Y/C component signal input (same to S-Video input)
Capable of receiving Y/C high definition component signal from DVD
YPbPr input
Capable of receiving high definition YPbPr signals in 480i, 480P, 576i, 720P, 1080i and
1080P formats
„
„
PC input
a. Connecting with the host computer
b. Use it as a display terminal
c. Connect the 3.5mm(diameter) audio cord to your computer’s audio main board,
music can be transmitted from the host computer
DVI input
Capable of receiving DVI signal
„
„
PIP, POP, PBP function
Program ＆ Child Lock
„
„
„
„
Zoom mode
LTI, CTI, and black field
BBE sound technology
Trusurround sound technology
PAGE 4
Download from Www.Somanuals.com. All Manuals Search And Download.
„
„
„
„
„
„
„
Full-light display
Picture amending display function
Fleshtone enhancement and improvement
Super definition display panel
3:2, 2:2 Pull Down
TV program scan function
Timer function
Automatically on/off in certain preset time
Blue background with noise reduction
In TV,AV, AV1,AV2 and YPbPr modes, screen displays soft blue background if there is
no signal input
„
„
„
Auto Off if no signal input
In TV mode, the LCD TV will automatically power off within 15 minutes and enter into
the Power Energy Saving Mode if there is no signal input
Multi Language On-Screen Display menu
Ordinary and graphical user interface makes the menu operation more user-friendly
Power Energy Saving Mode (power management mode)
When used as PC display terminal without PC signal output, the LCD TV will
automatically power off within 15 seconds and enter into the Power Energy Saving
Mode. It will power up again when it receives a signal from PC. Otherwise, you can
press any key on the remote control
„
„
„
„
Plug and Play
No installation software is needed to use the TV as computer terminal display
equipment
Auto adjustment
Adjust the picture’s quality automatically
„
„
„
„
No flicker and radiation
Legerity, convenient, low power consumption
10-page or 255-page teletext function (optional)
NICAM
Press
on the remote control to activate the function of NICAM if the current
program has this function
„
„
ACI (Automatic channel Installation) function
Simplifies installation for user, let the TV do most of the work.
Muti language teletext display
Teletext shares the same language options with the OSD.
PAGE 5
Download from Www.Somanuals.com. All Manuals Search And Download.
BRIEF INTRODUCTION
Front Panel
W320F8E
Infrared Receiver
Indicator Light
AC Power Switch
W370F8E
Infrared Receiver
Indicator Light
AC Power Switch
Panel Buttons
W320F8E
W370F8E
PAGE 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Button
Description
To switch between TV,AV, AV1, AV2, YPbPr, PC, and DVI modes
The same function to【AV】on remote control
To enter or exit the OSD (On-Screen Display) menu
To browse the OSD menu
To decrease the sound volume
To adjust functions in menu operation
To increase the sound volume
To adjust functions in menu operation
【TV/AV】
【MENU】
【VOL-】
【VOL+】
1. In TV mode, decrease channel number
2. To select functions in menu operation
【CH-】
【CH+】
1. In TV mode, increase channel number
2. Select functions in menu operation
Turn the LCD TV on or enter into STANDBY
【
】
The same function to【
】on remote control
Note:
In this operation manual, 【】symbol means Button.
Rear Panel
AC Power Switch
AC Input
AV Input(1)
Items
Description
AC Input
AC power supply input port
To turn on/off the TV
AC Power Switch
Signal Input/Output Terminals
AV input, headphone output, please see illustration 1
TV signal input, AV (1), AV(2) input and YPbPr input, please see
illustration 2
Including audio input of DVI and PC, DVI input, PC input, see
illustration 3
Signal Input/Output Terminals
Signal Input/Output Terminals
PAGE 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Enlarged View of Signal Input/Output Terminals 1:
Enlarged View of Signal Input/Output Terminals 2:
Enlarged View of Signal Input/Output Terminals 3:
Items
AV IN
Description
Video or Y/C input. When they are input respectively, sign of AV(Video) or AV (Y/C)
appears on the screen accordingly
HEADPHONE
OUTPUT
Headphone audio signal output
Video or RGB signal input
TV-Video signal output
AV(1)
Video or Y/C signal input. When they are input respectively, sign of AV2(Video) or
AV2(Y/C) appears on the screen accordingly
AV(2)
TV-Video signal output
Capable of transmitting YPbPr signal from DVD or other equipments to YPbPr input
port
COMPONENT IN
DVI IN
PC IN
Digital video signal input
PC signal input
PAGE 8
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
Overview of the Remote Control
Picture Size Mode Selection
Power On/Off
Recall
Digit Number
Signal Source Selection
Picture Mode Selection
Invalid Button
Sound Mode Selection
Invalid Button
On-screen Menu
Channel Up
Enter
Volume Down
Channel Down
Volume Up
Color
Sleep Timer
Sound Mute
Subcode
Status Display
Picture still
East/West
Text
Index/Nicam
Cancel
Size
Reveal/Conceal
Hold
PIP Location
PIP Source Selection
PIP Channel Up
PIP Swap
PIP Still
PIP Size
PIP On/Off
PIP Channel Down
PAGE 9
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Functions Except Teletext Functions
1 . RECALL : Return to last viewed program
2 . ZOOM : Adjust displayable aspect ratio
3 . POWER ON/OFF : Switch on or off TV set
4 . 0-9 Number Keys : Key in the alphanumeric digits to switch to the designated channel
directly
5 . AV : Toggle between different signal sources available
6 . MENU : To go to the On Screen Display(OSD) menus
7 . P. MODE : Select different mode of picture setting
8 . S. MODE : Select different mode of sound setting
9 . P+ : Scroll to next channel
10 . P- : Scroll to previous channel
11 . V- :Decrease audio volume
12 . V+ : Increase audio volume
13 . OK : Select or confirm sub menu of the OSD
14 . DISPLAY : Show info of current program
15 . SLEEP : Select time of TV to sleep mode
16 . MUTE : Mute sound
17 . ∞I/II: Select between mono or stereo sound and dual I/II soundtrack
18.
Display the current time
19 . STILL : Freeze or activate current picture
20 . PIP SOURCE SELECTION : Select source of Sub-Picture source
21 . PIP LOCATION : Adjust position of Sub-Picture
22 . PIP CHANNEL UP : Switch to the next channel of Sub-Picture
PAGE 10
Download from Www.Somanuals.com. All Manuals Search And Download.
23 . PIP SWAP : Interchange main picture displayed with Sub-Picture source
24 . PIP STILL : Freeze or activate sub-picture
25 . PIP SIZE : Adjust size or Mode of Sub-Picture
26 . PIP CHANNEL DOWN : Switch to the previous channel of Sub-Picture
27 . PIP ON/OFF : Turn on or off Sub-Picture function
Teletext Functions
1. 0-9 Channel Keys : Key in the alphanumeric digits to go to the designated page directly
2. P+ Keys : Press【P+】to scroll to the next page
3. P- Keys : Press【P-】to scroll to the previous page
4. L.ROTA Key : RED Teletext Button
5. PRE Key : GREEN Teletext Button
6. NEXT Key : YELLOW Teletext Button
7. R.ROTA Key : CYAN Teletext Button
8. TEXT Key
: Switch between teletext on, mix ,PBP Mode and teletext off.
: Switch between different languages
9. EAST/WEST Key
10. SUBCODE Key
: Switch between secondary pages by entering the four digit
number
11. INDEX Key
12. HOLD Key
13. SIZE Key
: Go to index page directly
: Retain the current teletext page and again to cancel the function
: Switch between zooming to the upper half, lower half and in full
: Exit from the teletext mode
14. CANCEL Key
15. REVEAL/CONCEAL Key
: Reveal or conceal hidden text for quizzes etc
PAGE 11
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
1. Remove the LCD TV from the box and place it on a flat surface in a well-ventilated
location.
2. Connect the output terminal of RF cable to the corresponding TV input terminal.
3. Connect AV signal output (DVD or other equipments) to AV input terminal of the LCD TV
with AV connecter. Ensure that every AV signal cable is connected correctly to the
corresponding port.
4. Connect one side of PC, DVI terminals to the corresponding signal source terminal, and
connect the other side to the corresponding LCD TV terminal. Screw down the
thumbscrews on both sides to secure it. Affix the plug with care to avoid damage.
5. Connect the power cord to the AC outlet. Do ensure that other connected devices to the
same power source are switched off.
Caution:
Please refer the power range of this product to the back label on the back cover, do not
connect to any power supply, which is out of this range. When unplugging the power cord,
do not touch the metal part.
GENERAL OPERATION
To Turn the TV On
1. When you turn on the power, the indicator in the front panel will blink till the TV displays
pictures.
2. In Standby mode, press 【 】on the remote control or front panel to enter to Power On
mode.
To Turn the TV Off
1. Press 【 】on the remote control or front panel to turn the TV transitorily off.
2. Unplug the power cord from the AC outlet to turn the TV off completely.
Caution: The TV will be automatically off when the power is suddenly off. The following may
occur if you did not unplug the power cord from the AC outlet:
a. The TV is in standby mode if it was in TV mode before
b. The TV will be automatically on if it was in other modes (such as AV/PC
mode)
Please do not turn on/off the TV set too often!
Please unplug the power cord from the AC outlet in time when the power is suddenly off!
Auto Off if No Signal Input
The TV will be auto off and enter into Standby mode after 15 minutes when there is no signal
(For instance, no program signal transmitted from the TV Station) input or no operation of
pressing buttons.
Indicator Light
Status
Working mode
Standby
Light Color
Off
Description
The TV works normally
Red
In Standby Mode
Timer On
Green
Timer On is valid.
Timer Off is valid
Timer Off
Green
Power Off
No Indicator
Yellow
The TV is turned off
Sleep in PC/DVI mode
Sleep (PC, DVI)
PAGE 12
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU OPERATION
1. Use the On Screen Display MENU to regulate the picture’s quality.
2. Different operating languages are available.
3. The display time for the menu ranges from 3~60 seconds. This can be adjusted in the
General Setting menu.
4. Use the Panel buttons or the Remote Control to operate the OSD MENU.
FUNCTION INTRODUCTION
Using the Channel Setting Menu (For TV Use Only)
1) Press【MENU】and then use【V+】/【V-】 to select the
Channel Setting menu in TV mode.
2) Use 【P+】/【P-】to select the desired field.
Current Channel
Press 【V+】/【V-】to increase/decrease the channel
number.
Channel Label
Press【OK】to enter the edit mode.
Press【P+】/【P-】to select the desired letter, press【V+】
/【V-】for next operation.
Color System
Switch among PAL, SECAM and AUTO systems.
Sound System
Switch among B/G, I, D/K, L and AUTO systems.
Skip
After Auto Search, there may be some repeated programs
stored. Skipping the repeated programs can shorten the
program selection.
1. Press【P+】/【P-】to search for the Program skipped.
2. Input the channel number directly to resume the Program Number skipped.
Auto Search
In the Channel Setting Menu, press 【P+】/【P-】
to select Auto Search and press 【OK】/【V+】 to
start Auto Searching mode.
1. During searching, the sound and color
systems are automatically adjusted and
programs are stored.
2. When search is finished, all 100 channels are stored, or 【MENU】is pressed during
the search process, the search will automatically stop and go to the channel setting
menu with channel 0.
Note: During searching, if channel information detected, there will be an OSD, we can
Install the channel information by the hint.
PAGE 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Search
In TV mode, select Manual Search option and press
【OK】/【V+】to enter into Manual Search . Use
【V+】/【V-】to search programs within high or low
frequency. After searching, the TV will automatically
store receivable channels and return to the menu.
Fine
When the picture and sound of a channel are not satisfactory after Auto Search or Manual
Search, Fine function can be used to adjust the
pictures and sound.
1.In TV mode, select Fine and press【OK】/【V+】
to enter the Fine tuning mode.
2.Press【V+】/【V-】to increase or decrease the
frequency value for fine-tuning.
Note: During auto search, manual search, and fine-tune operation, a password needs to be
entered if any program is locked.
Channel Table
Two kinds of program list, Air & Cable, can be chosen. 2~69 for Air list and 1~125 for Cable
list.
Note: This function is for U.S.A users only.
Auto Scan
In TV mode, select Auto Scan to activate the scan mode. All pictures will be displayed in the
current channel. The current program will be displayed in the middle of the screen, with
twelve small pictures around the middle picture. All pictures are scanned, beginning with the
current program, from the upper-left side screen in clockwise direction. Use 【P+】/【P-】
and【V+】/【V-】to select the desired channel; Use 【OK】to exit from the Auto Scan mode
and watch only the selected channel. Use【MENU】to exit from the Auto Scan mode directly.
Note: There will be a stripe blank on the right side screen during Auto Scan, this situation is
normal, for it is to better the viewing
proportion(only for 32″, 37″LCD TV).
Exchange
In TV mode, select Exchange to enter the PBP
mode.
Press【V+】/【V-】to switch between the main picture &
sub-picture.
Press 【P+】/【P-】or the number buttons to select
between the channel 1& channel 2.
Press【OK】to switch between the programs.
Using the Picture Setting Menu
1) Press【MENU】and then use 【V+】/【V-】to select
the Picture Setting menu.
2) Press【P+】/【P-】to select the desired field.
PAGE 14
Download from Www.Somanuals.com. All Manuals Search And Download.
Full Light Watch
The TV adjusts the brightness of the LCD TV according
to the environment.
Picture Mode
Four modes to be selected: Standard, Mild, Bright, User.
Brightness
To adjust the picture’s brightness.
Contrast
To adjust the picture’s contrast.
Saturation
To adjust the picture’s saturation.
Sharpness
To adjust the picture’s definition.
Hue
To adjust the picture’s tint. (For NTSC signal only)
Color Temp
Four modes can be chosen: Warm, Normal, Cool, and User. (User mode is valid for PC &
DVI only)
Fleshtone
To adjust the human skin tones
Using the Audio Setting Menu
1) Press【MENU】and 【V+】/【V-】to select the Audio
Setting menu.
2) Press【P+】/【P-】to select the desired field.
Sound Mode
Four modes to be selected: Standard, News, Music and
User
Bass
To adjust the bass
Treble
To adjust the treble
Surround
To select the surround mode between Off, Normal and Spatial
Balance
To adjust the balance between the left and right speakers
PAGE 15
Download from Www.Somanuals.com. All Manuals Search And Download.
MTS
To select the desired mode of MTS (for U.S.A Users only)
BBE
To turn BBE On or Off
TruSurround
To turn TruSurround On or Off
Volume
To increase or decrease the volume
Using the General Setting Menu
1) Press【MENU】and then use【V+】/【V-】to select
the General Setting menu.
2) Press【P+】/【P-】to select the desired field.
Language
To choose the language options
OSD H Position
To adjust the OSD position horizontally
OSD V Position
To adjust the OSD position vertically
OSD Timeout
To adjust the length of time the OSD to be displayed
on the screen without any commands
Blue Screen
To set the Blue Screen on/off when there is no signal input in TV, AV, AV1, AV2, YPbPr
modes
Close Caption
Only valid for U.S.A users
Scaler Mode
To select viewable screen modes of Fill Screen, 4:3, Wide, Cinema and Subtitle.
Factory Reset
All users’ settings can be reset to the default settings except the TV programs
Transparency
To adjust the transparency of the OSD menu
Using the Timer Setting Menu
1) Press【MENU】and【V+】/【V-】to select the Timer Setting menu.
2) Press【P+】/【P-】to select the desired field.
PAGE 16
Download from Www.Somanuals.com. All Manuals Search And Download.
Sleep Time
To set the sleep time of the TV. This can be set with the remote control 【SLEEP】button.
Current Time
Press【OK】/【V+】to enter the mode.
Press【V+】/【V-】to set the Minute/Hour and press
【P+】/【P-】to adjust the time value.
On Time
Press【V+】/【V-】to set the Minute/Hour and press
【P+】/【P-】to adjust the time value.
On Channel
To set the default channel when turning on the TV.
Press【V+】/【V-】to change the channel number.
Off Time
Press【V+】/【V-】to set the Minute/Hour and press【P+】/【P-】to adjust the time value.
Timer Mode
Set the clock time mode.
Using the Child Lock Setting Menu
1) Press【MENU】and then use 【V+】/【V-】to select
the Child Lock Setting menu.
2) Press【P+】/【P-】to select the desired field.
In this mode, press【OK】/【P-】to enter the password
mode. Press the number button to enter the password.
The default password is “1601”.
After entering “1601” for the first time, the screen
displays the menu on the right.
Press the number button on the remote control to set the
new password. When done, press【OK】, and the TV will
go back to the main child lock mode.
Press【P+】/【P-】to switch between Lock Status, Lock
All, and Clear All.
‹ In Lock Status mode, press【OK】/【V+】to enter the set mode. Then press【P+】/【P-】
PAGE 17
Download from Www.Somanuals.com. All Manuals Search And Download.
to select the channel and press【V+】/【V-】to set
lock/unlock.
‹ A prompt appears when a locked channel is switched.
The password needs to be entered to watch the
program.
‹ In Lock All mode, press【OK】/【V+】to lock all of the
programs.
‹ In Clear All mode, press【OK】/【V+】to unlock all of
the programs.
Note: In child lock menu operation, each function cannot be activated until
the correct
password is entered. If the password is forgotten, the default password of “1601” is still valid.
Using the PC Setting menu (for PC mode only)
1) Press【MENU】and then use【V+】/【V-】 to select the
desired field.
2) Press【P+】/【P-】to make the desired adjustment.
● Auto Tracking
To adjust automatically the picture’s clock,phase, H
Position and V Position to get the best visual effect.
● Phase
To adjust pictures’ sampling phase in PC mode
● Clock
To adjust pictures’ sampling frequency .
● H Position
To adjust picture’s position horizontally in PC mode.
● V Position
To adjust picture’s position vertically in PC mode.
Note:
In the menu, gray items means invalid to operate in the current mode.
OTHER FUNCTIONS INTRODUCTION
Standby Mode
Press【 】on the TV panel/Remote Control, the LCD TV will store the current setup and
enter into standby mode with a red indicator light. To Power on the LCD TV, press the button
again.
Signal Switch
Press【AV】on the remote control to select the signal sources: TV, AV, AV1, AV2, YPbPr, PC
and DVI.
The upper-right corner of the screen will display the corresponding information of the signal
source.
PAGE 18
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel Selection
Press 【CH+】 / 【CH-】 on the panel or 【P+】 /【P-】on the remote control to change
the channels. If a channel number is in SKIP ON mode, the next channel will be displayed.
A maximum of three channel numbers can be input at one time on the remote control.
Volume Control
Press 【V+】/【V-】 to increase or decrease the volume. The range is 0-100.
The Volume menu will be automatically off if there is no operation in 4 seconds.
Mute
Press the【MUTE】on the remote control to turn On/Off the MUTE mode. Alternatively, press
【MUTE】, change the volume level to turn the MUTE off. The
symbol will appear
at bottom-left corner of the screen as the Mute function is switched on. The
symbol is hidden when the menu operation is entered, but the feature is still valid. It appears
again when the menu operation is exited. When there is no valid signal input, the TV will be
mute (but no mute symbol) with a blue background.
Sound Mode Selection
Press【S.MODE】to select modes of Standard, News, Music or User.
The value of Standard, News, Music modes are default setting and cannot be adjusted. Only
User mode allows setting to the preferred mix.
Picture Mode Selection
Press【P.MODE】to select modes of Standard, Mild, Bright or User.
Information Display
Press 【DISPLAY 】to reveal the current signal source and its
corresponding information of Channel Number, Channel label, Color
System, Stereo/FM Mono and signal source of PIP. Characters in
green on the upper-right side display information for the main picture
in TV mode while characters in red displays the source information for
the sub-picture. Press again to exit.
PIP:PC
Sleep Function
Press【SLEEP】to select the sleep time between
intervals of 10, 20, 30, 60, 90, 120, 180 minutes
or switch off the SLEEP function. A prompt will
appear when it is one minute from SLEEP. Press
any button to exit.
PAGE 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Recall
In TV mode, press【RECALL】to return the previous channel or the previous signal source.
Zoom Mode
Switch between Fill screen, 4:3, Wide, Cinema and Subtitle.
Still
Press【STILL】to freeze or activate the current image.
PIP/POP/PBP Function
Press
to enter into or exit from the sub-picture mode.
1. Press
to choose sub-picture signal source of TV, AV, AV1, AV2, YPbPr, PC and DVI.
2. Press
to choose the sub-picture mode of PIP, PBP and POP.
● Mode 1: To overlap a sub-picture (PIP) in small size
● Mode 2: To place two pictures of the same size side by side. Both main picture and
sub-picture (PBP) cover half of the display screen area.
● Mode 3: A main picture covers 12/16 area of the display screen while a sub-picture
(POP) covers 1/16.
3. Press
4. Press
5. Press
to switch between the main picture and sub-picture.
to freeze or continue the program of the current sub-picture.
to adjust the sub-picture position.
To switch the sub-picture’s channels while in TV mode, pressing 【CH+】/【CH-】.
The sub-picture can enter into TV mode directly by pressing【CH+】【/ CH-】in other modes.
The below table illustrates the possible combination of different modes when in
PIP/POP/PBP Function.
Main Pic
TV
AV(CVBS)
AV(Y/C)
AV1(CVBS)
AV1(RGB)
AV2(CVBS)
AV2(Y/C)
PC
DVI
YPbPr
Sub Pic
TV
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
AV(CVBS)
AV(Y/C)
AV1(CVBS)
AV1(RGB)
AV2(CVBS)
AV2(Y/C)
PC
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
DVI
●
●
YPbPr
Note: All buttons mentioned in this operation are on the remote control, signs of “●” mean
that both pictures can be displayed at the same time and the blanks mean that both modes
can not be displayed at the same time.
PAGE 20
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Before calling a technician, please check the following table to see if the below mentioned
symptoms can be diagnosed and fixed.
Symptoms
Possible Reasons
Correction
No picture, no sound,
and no indicator light
on
1.The power cord is not plugged in
2.The power is off
1.Plug the power cord in
2.Turn the power on
1.Contrast, sharpness, color and
volume are all in the minimum value
or TV is in mute mode
2.PC has no signal in PC mode
3.The signal cord is not correctly
connected
1. Alter the value of contrast,
sharpness, color and volume
No picture, no sound,
but the green light
indicator
2.Press any button or input PC signal
3.Connect the signal cord correctly
1.Set the value of Contrast, sharpness,
and color properly
2. Set the Color system to the country
broadcasting standard
3.Set the Sound system to the country
broadcasting standard
1.Contrast, sharpness, and color are
set improperly
2.Color system is set improperly
3.Sound system is set improperly
Picture and sound
with abnormity
Picture is spotted or
with snow
Signal source is low-grade or the
signal cord is in a lower quality
Use the qualified signal cord
Blue background in
AV mode
No Video signal or the signal cord is
improperly/not connected
Connect the signal cord properly
Picture is unclear, or
moves or have black
stripes on horizontal
position in PC mode
Adjust automatically by selecting Auto
Adjust or alternatively adjust Clock and
Phase manually via PC Setting menu
Picture is not well adjusted
PC Picture is not in
the middle of the
screen
1.Connect the audio signal cord
properly
2.Set the sound system properly
1.Make sure the positive and the
negative polarities are correct.
No Audio signal or the signal cord is
improperly/not connected
No sound
The remote control
does not work
Batteries are improperly installed or 2.Check if there is a loose contact
exhausted
between the batteries and the
springs
3.Replace the batteries
Colors of PC Picture
on display are
improper
The user made the wrong Color Temp
adjustment
Readjust the Color Temperature
PAGE 21
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Model: W260F8E
Items
Color System
Specifications
PAL, SECAM
D/K, I, B/G, L
Sound System
PC, DVI Qualified Input Format
YPbPr Input Format
Audio Output Consumption
AV (Video,Y/C) Input
AV1 (TV-Video)Output
Headphone Output
AV1 (Video, RGB) Input
AV2(Video, Y/C) Input
AV2(TV-Video,) Output
YPbPr Input
VGA/SVGA/XGA/WXGA 60Hz
480i, 480P, 576i, 576P, 720P, 1080i, 1080P
2x5W
One Way
One Way
One Way
One Way
One Way
One Way
One Way
One Way
One Way
PC Input
DVI Input
Voltage Input
Please refer to the back label
Rated Power Consumption
Standby Power Consumption
≤2W
804mm（W）×510mm(H)×294mm(D)
（including the pedestal）
804mm (W) X436mm (H) X106mm (D)
(Not Including the pedestal)
Unit Dimension
Recommended resolution in PC mode
Unit Weight
1280x768 60Hz
17.5kg（Approx.）
PAGE 22
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Model: W320F8E
Items
Color System
Specifications
PAL, SECAM
D/K, I, B/G, L
Sound System
PC, DVI Qualified Input Format
YPbPr Input Format
Audio Output Consumption
AV (Video,Y/C) Input
AV1 (TV-Video)Output
Headphone Output
AV1 (Video, RGB) Input
AV2(Video, Y/C) Input
AV2(TV-Video,) Output
YPbPr Input
VGA/SVGA/XGA/WXGA 60Hz
480i, 480P, 576i, 576P, 720P, 1080i, 1080P
2x5W
One Way
One Way
One Way
One Way
One Way
One Way
One Way
One Way
One Way
PC Input
DVI Input
Voltage Input
Please refer to the back label
Rated Power Consumption
Standby Power Consumption
≤2W
954mm（W）×579mm(H)×314mm(D)
（including the pedestal）
954mm (W) X502mm (H) X105mm (D)
(Not Including the pedestal)
Unit Dimension
Recommended resolution in PC mode
Unit Weight
1280x768 60Hz
21.5kg (Approx.)
PAGE 23
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Model: W370F8E
Items
Color System
Specifications
PAL, SECAM
D/K, I, B/G, L
Sound System
PC, DVI Qualified Input Format
YPbPr Input Format
Audio Output Consumption
AV (Video,Y/C) Input
AV1 (TV-Video)Output
Headphone Output
AV1 (Video, RGB) Input
AV2(Video, Y/C) Input
AV2(TV-Video,) Output
YPbPr Input
VGA/SVGA/XGA/WXGA 60Hz
480i, 480P, 576i, 576P, 720P, 1080i, 1080P
2x5W
One Way
One Way
One Way
One Way
One Way
One Way
One Way
One Way
One Way
PC Input
DVI Input
Voltage Input
Please refer to the back label
Rated Power Consumption
Standby Power Consumption
≤2W
1118mm（W）×646mm(H)×334mm(D)
（including the pedestal）
1118mm (W) X587mm (H) X106mm (D)
(Not Including the pedestal)
Unit Dimension
Recommended resolution in PC mode
Unit Weight
1280x768 60Hz
29.5kg (Approx.)
PAGE 24
Download from Www.Somanuals.com. All Manuals Search And Download.
|