INSTRUCTION MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
ASTRONOMY BASICS...................................................................................................................28
The Celestial Coordinate System........................................................................................................... 28
Motion of the Stars................................................................................................................................. 29
Polar Alignment (with optional Wedge) ................................................................................................ 30
Finding the North Celestial Pole........................................................................................................... 31
CELESTIAL OBSERVING..............................................................................................................32
Observing the Moon .............................................................................................................................. 32
Observing the Planets............................................................................................................................ 32
Observing the Sun.................................................................................................................................. 32
Observing Deep Sky Objects.................................................................................................................. 33
Seeing Conditions.................................................................................................................................. 33
Transparency......................................................................................................................................... 33
Sky Illumination..................................................................................................................................... 33
Seeing .................................................................................................................................................... 33
CELESTIAL PHOTOGRAPHY .......................................................................................................35
Short Exposure Prime Focus Photography ........................................................................................... 35
Eyepiece Projection............................................................................................................................... 36
Long Exposure Prime Focus Photography............................................................................................ 37
Terrestrial Photography ........................................................................................................................ 39
CCD Imaging......................................................................................................................................... 39
TELESCOPE MAINTENANCE .......................................................................................................40
Care and Cleaning of the Optics ........................................................................................................... 40
Collimation............................................................................................................................................ 40
OPTIONAL ACCESSORIES...........................................................................................................43
APPENDIX A – TECHNICAL SPECIFICATIONS ..........................................................................46
APPENDIX B – GLOSSARY OF TERMS.......................................................................................48
APPENDIX C –LONGITUDES AND LATITUDES..........................................................................51
APPENDIX D – RS-232 CONNECTION.........................................................................................56
APPENDIX E – TIME ZONE MAPS................................................................................................57
SKY MAPS......................................................................................................................................59
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Congratulations on your purchase of the Celestron NexStar! The NexStar i-series telescopes are precision
scientific instruments that will allow you to enjoy viewing numerous objects in the night sky — planets,
nebulae, star clusters, galaxies and more. Equipped with high speed motors and hand control, the NexStar-i
allows you to remotely move your telescope to desired objects quickly and accurately. At a touch of a button,
you can move your telescope across the sky in a matter of seconds and track objects remotely as the Earth
rotates beneath them. The NexStar-i is fully upgradeable and can be equipped with the optional NexStar
Hand Control with a database of over 40,000 objects (see the Computerized Hand Control section of this
manual) for fully automated operation.
Some of the many standard features of the NexStar include:
•
•
•
Incredible 6°/second (or faster) slew speed.
Fully enclosed motors on both axes.
Integrated hand controller – built into the side of the fork arm.
Many other high performance features!
The NexStar’s deluxe features combine with Celestron’s legendary Schmidt-Cassegrain optical system to
give amateur astronomers one of the most versatile and easy to use telescopes available on the market
today.
Your NexStar telescope is designed to give you years of fun and rewarding observations. However, there are
a few things to consider before using your telescope that will ensure your safety and protect your equipment.
Warning
‰
‰
‰
‰
Never look directly at the sun with the naked eye or with a telescope (unless you have the proper
solar filter). Permanent and irreversible eye damage may result.
Never use your telescope to project an image of the sun onto any surface. Internal heat build-up can
damage the telescope and any accessories attached to it.
Never use an eyepiece solar filter or a Herschel wedge. Internal heat build-up inside the telescope can
cause these devices to crack or break, allowing unfiltered sunlight to pass through to the eye.
Never leave the telescope unsupervised, either when children are present or adults who may not be
familiar with the correct operating procedures of your telescope.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
12
1
2
3
11
10
4
5
9
8
6
7
Figure 1-A - The NexStar 8i SE
1
2
3
4
5
Optical Tube
Star Pointer Finderscope
Eyepiece
7
8
9
Accessory Tary
Tripod
ON/OFF Switch / 12v power
Star Diagonal
10 Fork Arm
Focuser Knob
11 Hand Control
6
Battery Compartment
12 Schmidt Corrector Plate (not shown)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
StarPointer
Finderscope
3
1
Eyepiece
Star
Diagonal
Visual Back
Remove the NexStar from its packaging and
attach the base to the tripod. Remove the
accessories from their individual boxes. Rotate
the optical tube so that you can access the
battery compartment.
A) Attach the included accessories. Loosen the
thumb screws on the side of the visual back
and remove the protective plastic cap. Insert
the star diagonal and eyepiece into the barrel of
the visual back and tighten down all thumb
screws. B) Twist and remove the front lens
cover from the end of the telescope. C) Attach
the Star Pointer and turn it on by rotating the
dial on the side. (For more information on
attaching the accessories, see the Assembly
section of manual).
2
Battery Compartment
4
Remove the battery cover in the center of the
base by gently lifting up on the round
portion of the cover. Insert 8 AA batteries
(user supplied) into the battery compartment
of the base. Replace the cover.
On/Off Switch
Turn on the power to the NexStar by turning
the switch located at the bottom portion of
the fork arm, to the "On" position.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
5
7
Direction
Buttons
Up and Down
Scroll Buttons
With the NexStar powered on, press ENTER to
begin an alignment.
Once the SELECT STAR 1 message appears on the
display, use the Up and Down scroll keys (10) to select
the star you wish to use for the first alignment star.
Press ENTER. Use the direction buttons to slew the
telescope to the alignment star and carefully center the
star in the finderscope and eyepiece. Once centered
in the eyepiece press ALIGN.
8
6
APPENDIX C LONGITUDE
degrees
LATITUDE
min degrees min
Torrance
118
19.8
33
48
Travis AFB
Tahoe
121
120
55.8
7.8
38
39
16.2
19.2
a) Use the Up and Down scroll buttons to get to the Auto
Two-Star Align menu and press ENTER. b) Input the
necessary date and time information as instructed by the
hand control. (See Hand Control section for complete
instruction on entering data). c) The first time the NexStar
is used from a new location, the longitude and latitude
must be entered into the hand control. When asked for
your coordinates , use Appendix C to look up the
longitude and latitude of your nearest city and enter it
into the hand control.
Based on the inputted information, the NexStar will
automatically choose a second alignment star and slew
the telescope close to that star. Once there, the display
will ask you to use the arrow buttons to aim the Star
Pointer at the star. If the star is not visible (perhaps
behind a tree), press UNDO to select a new star. Next,
center the star in the eyepiece and press ALIGN. When
complete, display will read "Alignment Successful".
8
Download from Www.Somanuals.com. All Manuals Search And Download.
The NexStar comes completely pre-assembled and can be operational in a matter of minutes. The NexStar and
its accessories are conveniently packaged in one reusable shipping carton that contains the following
accessories:
•
•
•
•
•
25mm Plossl Eyepiece – 1¼"
Star Diagonal - 1¼"
Star Pointer Finderscope and Mounting Bracket
Visual Back - 1¼" (attached to the optical tube)
Computerized Hand Control
Assembling the NexStar
Start by removing the telescope from its shipping carton and setting the round base on a flat table or surface. It is
best to carry the telescope by holding it from the lower portion of the fork arm and from the bottom of the base.
Remove all of the accessories from their individual boxes. Remember to save all of the containers so that they
can be used to transport the telescope.
Center
Support Rod
Mounting the Telescope to the Tripod
Accessory
Tray
1. Remove the tripod and accessory tray from its box.
2. Pull the legs apart until the legs are fully extended and press it down flat
against the ground.
3. Place the accessory tray over the center support rod so that each arm
of the accessory tray is pushing out against the inside of each leg.
Locking Knob
Figure 1-1
4. Tighten with the leg brace locking knob until the leg brace firmly presses out
against each leg.
Positioning
Pin
5. The tripod will now stand by itself.
Your tripod has height adjustable legs. To adjust the height of the tripod:
1. Locate the tightening screw on the bottom of each tripod leg.
2. Rotate the knob counterclockwise until the inside portion of the tripod leg slides
out.
Mounting
Holes
3. Extend the center portion of the tripod leg to the desired height.
Tighten the knob to hold the tripod leg in place.
Figure 1-2
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Powering the NexStar
The NexStar can be powered by eight user supplied AA batteries or with an optional AC adapter or cigarette
lighter adapter. The battery compartment is located in the center of the telescope's base (see figure 1-3).
To power the NexStar with batteries:
1. Slowly rotate the optical tube upwards so that you
have easy access to the battery compartment.
Battery Compartment
2. Remove the battery cover from the center of the base
by gently lifting up on the round portion of the cover.
3. Insert the batteries into the battery compartment of
the base.
4. Reattach the battery compartment door by gently
pushing down on the cover until it snaps into place.
5. Turn on the power to the NexStar by flipping the
switch, located at the bottom portion of the fork
arm, to the "On" position.
Figure 1-3: The NexStar can be powered
with 8 AA batteries.
The Hand Control
The hand control is located on the side of the fork arm and can be removed and used remotely or used while
attached to the fork. The hand control attaches to the fork arm by resting on two posts, located on the bottom of
the hand control cradle, and a clip inside the fork arm. To remove the hand control from the fork arm cradle,
gently lift the hand control upwards and pull out. To return the hand control into the fork arm, lower the hand
control into the cradle so that the opening in the back of the hand control slides over the clip inside the fork arm.
Once the telescope is powered up, use the hand control to move the optical tube to the horizontal position, this
will make it more convenient to attach the necessary accessories as well as remove the front lens cover.
NOTE
In case of a loss of power, the optical tube can be moved by hand. However, when powered on, the
telescope should always be controlled via the hand control.
StarPointer
Finderscope
Eyepiece
The Star Diagonal
The star diagonal diverts the light at a right angle from the light path of
the telescope. For astronomical observing, this allows you to observe
in positions that are more comfortable than if you were to look straight
through. To attach the star diagonal:
1. Turn the thumbscrew on the visual back until its tip no longer extends
into (i.e., obstructs) the inner diameter of the visual back.
2. Slide the chrome portion of the star diagonal into the visual back.
3. Tighten the thumbscrew on the visual back to hold the star diagonal in
place.
Star
Diagonal
Visual Back
If you wish to change the orientation of the star diagonal, loosen the
thumbscrew on the visual back until the star diagonal rotates freely.
Rotate the diagonal to the desired position and tighten the
thumbscrew.
Figure 1-4 - The Visual Accessories
10
Download from Www.Somanuals.com. All Manuals Search And Download.
The Eyepiece
The eyepiece, or ocular, is the optical element that magnifies the image focused by the telescope. The eyepiece
fits into either the visual back directly or the star diagonal. To install the eyepiece:
1. Loosen the thumbscrew on the star diagonal so it does not obstruct the inner diameter of the eyepiece end of the
diagonal.
2. Slide the chrome portion of the eyepiece into the star diagonal.
3. Tighten the thumbscrew to hold the eyepiece in place.
To remove the eyepiece, loosen the thumbscrew on the star diagonal and slide the eyepiece out.
Eyepieces are commonly referred to by focal length and barrel diameter. The focal length of each eyepiece is
printed on the eyepiece barrel. The longer the focal length (i.e., the larger the number) the lower the eyepiece
power or magnification; and the shorter the focal length (i.e., the smaller the number) the higher the
magnification. Generally, you will use low-to-moderate power when viewing. For more information on how to
determine power, see the section on “Calculating Magnification.”
Barrel diameter is the diameter of the barrel that slides into the star diagonal or visual back. The NexStar uses
eyepieces with a standard 1-1/4" barrel diameter.
The Star Pointer Finderscope
The Star Pointer is the quickest and easiest way to point your telescope exactly at a desired object in the sky. It's
like having a laser pointer that you can shine directly onto the night sky. The Star Pointer is a zero magnification
pointing tool that uses a coated glass window to superimpose the image of a small red dot onto the night sky.
While keeping both eyes open when looking through the Star Pointer, simply move your telescope until the red
dot, seen through the Star Pointer, merges with the object as seen with your unaided eye. The red dot is
produced by a light-emitting diode (LED); it is not a laser beam and will not damage the glass window or your
eye. The Star Pointer comes equipped with a variable brightness control, two axes alignment control and two
quick-release dovetail mounting brackets (one for the NexStar telescope and one for mounting the Star Pointer
on other sized telescopes). Before the Star Pointer is ready to be used, it must be attached to the telescope tube
and properly aligned:
ON/OFF
Variable Brightness
Control
Glass Window
Azimuth Control
Knob
Mounting Track
Altitude Control
Knob
Dovetail Mounting Bracket
Figure 1-5: The Star Pointer Finderscope with Mounting Bracket
Star Pointer Installation
1. First, remove the two 8-32 x ¼" screws located on the top portion of the telescope's rear cell.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Locate the square dovetail bracket that has the proper curvature for the NexStar tube and align the holes
with the two holes in the telescope body.
3. Use the two 8-32 x ¼" screws to tighten down the bracket to the rear cell.
4. Once the bracket is mounted, slide the mounting track at the bottom of the Star Pointer over the dovetail
portion of the bracket. It may be necessary to loosen the two screws on the side of the mounting track
before sliding it over the dovetail. The end of the Star Pointer with the glass window should be facing out
towards the front of the telescope.
5. Tighten the two screws on the side of the mounting track to secure the Star Pointer to the dovetail bracket.
Star Pointer Operation
The star pointer is powered by a long life 3-volt lithium battery (#CR2032) located underneath the front portion of
the Star Pointer. Like all finderscopes, the Star Pointer must be properly aligned with the main telescope before
it can be used. This is a simple process using the azimuth and altitude control knobs located on the side and
bottom of the Star Pointer. The alignment procedure is best done at night since the LED dot will be difficult to
see during the day.
1. To turn on the Star Pointer, rotate the variable brightness control (see figure 1-5) clockwise until you here a
"click". To increase the brightness level of the red dot, continue rotating the control knob about 180º until it
stops.
2. Locate a bright star or planet and center it in a low power eyepiece in the main telescope.
3. With both eyes open, look through the glass window at the alignment star.
If the Star Pointer is perfectly aligned, you will see the red LED dot overlap the alignment star. If the Star Pointer
is not aligned, take notice of where the red dot is relative to the bright star.
4. Without moving the main telescope, turn the Star Pointer's azimuth and altitude alignment controls until the
red dot is directly over the alignment star.
If the LED dot is brighter than the alignment star, it may make it difficult to see the star. Turn the variable
brightness control counterclockwise until the red dot is the same brightness as the alignment star. This will make
it easier to get an accurate alignment. The Star Pointer is now ready to be used . Remember to always turn
the power off after you have found an object. This will extend the life of both the battery and the LED.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
The NexStar Computerized Hand Control gives you instant access to all the functions your telescope has to
offer. With automatic slewing to over 40,000 objects, and common sense menu descriptions, even a beginner
can master its variety of features in just a few observing sessions. Below is a brief description of the individual
components of the computerized hand controller:
1. Liquid Crystal Display (LCD) Window: Has a dual-line, 16 character display screen that is backlit for
comfortable viewing of telescope information and scrolling text.
2. Align: Instructs the NexStar to use a selected star or object as an alignment position.
3. Direction Keys: Allows complete control of the NexStar in any direction. Use the direction keys to
move the telescope to the initial alignment stars or for centering objects in the eyepiece.
1
7
2
8
3
9
10
4
5
11
6
12
Figure 2-1
The NexStar Computerized Hand Control
13
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Catalog Keys: The NexStar has keys on the hand control to allow direct access to each of the
catalogs in its database. The NexStar contains the following catalogs in its database:
Messier – Complete list of all Messier objects.
NGC – Complete list of all the deep-sky objects in the Revised New General Catalog.
Caldwell – A combination of the best NGC and IC objects.
Planets - All 8 planets in our Solar System plus the Moon and Sun.
Stars – A compiled list of the brightest stars from the SAO catalog.
List – For quick access, all of the best and most popular objects in the NexStar
database have been broken down into customized lists based on their type and/or
common name:
Named Stars
Named Objects
Double Stars
Common name listing of the brightest stars in the
sky.
Alphabetical listing of over 50 of the most popular
deep sky objects.
Numeric-alphabetical listing of the most visually
stunning double, triple and quadruple stars in the
sky.
Variable Stars
Asterisms
Select list of the brightest variable stars with the
shortest period of changing magnitude.
A unique list of some of the most recognizable star
patterns in the sky.
CCD Objects
IC Objects
A custom list of many interesting galaxy pairs, trios
and clusters that are well suited for CCD imaging.
A complete list of all the Index Catalog deep-sky
objects.
Abell Objects
A complete list of all the Abell Catalog deep-sky
objects.
5. Info: Displays coordinates and useful information about objects selected from the NexStar database.
6. Tour: Activates the tour mode, which seeks out all the best objects for the current date and time, and
automatically slews the NexStar to those objects.
7. Enter: Pressing Enter allows you to select any of the NexStar functions and accept entered parameters.
8. Undo: Undo will take you out of the current menu and display the previous level of the menu path.
Press Undo repeatedly to get back to a main menu or use it to erase data entered by mistake.
9. Menu: Displays the many setup and utilities functions such as tracking rate and user defined objects
and many others.
10. Scroll Keys: Used to scroll up and down within any of the menu lists. A double-arrow will appear on the
right side of the LCD when there are sub-menus below the displayed menu. Using these keys will scroll
through those sub-menus.
11. Rate: Instantly changes the rate of speed of the motors when the direction buttons are pressed.
12. RS-232 Jack: Allows you to interface with a computer and control the NexStar remotely.
Hand Control Operation
This section describes the basic hand control procedures needed to operate the NexStar. These procedures are
grouped into three categories: Alignment, Setup and Utilities. The alignment section deals with the initial
telescope alignment as well as finding objects in the sky; the setup section discusses changing parameters such
as tracking mode and tracking rate; finally, the last section reviews all of the utilities functions such as the slew
limits, database filter limits and backlash compensation.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Alignment Procedures
In order for the NexStar to accurately point to objects in the sky, it must first be aligned to two known positions
(stars) in the sky. With this information, the telescope can create a model of the sky, which it uses to locate any
object with known coordinates. There are many ways to align the NexStar with the sky depending on what
information the user is able to provide: Auto Two-Star Align will ask the user to input date and location
information and identify one star in order to locate a second alignment star; Two-Star Alignment does require
the user to identify and manually slew the telescope to the two alignment stars. Finally, EQ North and EQ South
alignments are designed to assist you in aligning the NexStar when polar aligned using an equatorial wedge.
Each alignment method is discussed in detail below.
Auto Two-Star Align
Auto Two-Star Align allows the user to input all the necessary time/site information needed to align the
telescope. After choosing Auto Two-Star Align, NexStar will ask you to input first the local time and date, then it
will ask for your location. Once this information is received, NexStar will prompt you to slew the telescope and
point at one known star in the sky. The NexStar now has all the information it needs to choose a second
alignment star that will assure the best possible alignment.
With the NexStar set up outside with all accessories attached and the tripod leveled, follow the steps below to
Align the NexStar:
1. Once the NexStar is powered on, the hand control will read NexStarSE Ready. Press ENTER to begin
alignment.
2. Use the Up and Down scroll keys (10) to select Auto Two-Star Align and press ENTER.
3. The hand control will then display the following information for you to accept or modify. Use the Up and
Down scroll buttons (10) to scroll through the information. If any of the parameters need to be updated,
press the UNDO button and enter the current information. If all the information is correct, press ENTER
to accept.
(Note: the NexStar will always retain the most recent time/site information entered into the hand control unless
the optional CN16 GPS accessory is being used. When using the CN16, the GPS receiver will update local time
and location information automatically)
Time - Enter the current local time for your area. You can enter either the local time (i.e. 08:00), or you can
enter military time (i.e. 20:00 ).
•
•
Select PM or AM. If military time was entered, the hand control will bypass this step.
Choose between Standard time or Daylight Savings time. Use the Up and Down scroll buttons
(10) to toggle between options.
•
Select the time zone that you are observing from. Again, use the Up and Down buttons (10) to
scroll through the choices. Refer to Time Zone map in Appendix E for more information.
Helpful
Hint
Date - Enter the month, day and year of your observing session.
If the wrong information has been input into the hand control, the UNDO button will act as a backspace allowing
the user to re-enter information.
4. Finally, you must enter the longitude and latitude of the location of your observing site. Use the table in
Appendix C to locate the closest longitude and latitude for your current observing location and enter
those numbers when asked in the hand control, pressing ENTER after each entry. Remember to select
"West" for longitudes in North America and "North" for latitudes in the North Hemisphere. For
international cities, the correct hemisphere is indicated in the Appendix listings.
5. The SELECT STAR 1 message will appear in the top row of the display. Use the Up and Down scroll keys
(10) to select the star you wish to use for the first alignment star. Press ENTER.
6. NexStar then asks you to center in the eyepiece the alignment star you selected. Use the direction
buttons to slew the telescope to the alignment star and carefully center the star in the eyepiece.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Based on this information, the NexStar will automatically select a second bright star that is above the horizon and
slew towards it. At this point the telescope is only roughly aligned, so the alignment star should only be near the
field of view of the Star Pointer finderscope. Once finished slewing, the display will ask you to use the arrow
buttons to align the selected star with the red dot in the center of the Star Pointer. If for some reason the chosen
star is not visible (perhaps behind a tree or building) you can press UNDO to select and slew to a different star.
Once centered in the Star Pointer, press ENTER. The display will then instruct you to center the star in the field
of view of the eyepiece. When the star is centered, press ALIGN to accept this star as your second alignment
star. When the telescope has been aligned to both stars the display will read Alignment Successful, and
you are now ready to find your first object.
Trouble
Shooting
If the wrong star was centered and aligned to, the NexStar display will read Alignment Failed and scroll the
message, "the positions of the alignment stars did not match the database". Should this occur, press the UNDO
button and re-align the telescope. Remember the alignment star will always be the brightest star nearest the
field of view of the finderscope.
Observing
Tip
For the best possible pointing accuracy, always center the alignment stars using the up arrow button and the
right arrow button. Approaching the star from this direction when looking through the eyepiece will eliminate
much of the backlash between the gears and assure the most accurate alignment possible. However, if the “Goto
Approach” of the telescope has been changed (see ”Goto Approach” later in this section), then remember to
always center the alignment stars in the same direction that the telescope centers objects when completing a
slew.
Two Star Alignment
With the two-star alignment method, the NexStar requires the user to know the positions of only two bright stars
in order to accurately align the telescope with the sky and begin finding objects. Here is an overview of the two-
star alignment procedure:
1. Once the NexStar is powered on, use the Up and Down scroll keys (10) to select Two-Star Align,
and press ENTER.
2. The hand control will then display the date/time information for you to accept or modify. Use the Up and
Down scroll buttons (10) to scroll through the information. If any of the parameters need to be updated,
press the UNDO button and enter the current information. If all the information is correct, press ENTER
to accept.
3. The SELECT STAR 1 message will appear in the top row of the display. Use the Up and Down scroll keys
(10) to select the star you wish to use for the first alignment star. Press ENTER.
4. NexStar then asks you to center in the eyepiece the alignment star you selected. Use the direction
buttons to slew the telescope to the alignment star and carefully center the star in the eyepiece.
Helpful
Hint
In order to accurately center the alignment star in the eyepiece, it will be necessary to decrease the slew rate of
the motors for fine centering. This is done by pressing the RATE key (11) on the hand controller then selecting
the number that corresponds to the speed you desire. (9 = fastest , 1 = slowest).
5. Once the alignment star is centered in the field of view of the eyepiece, press the ALIGN key (2) to
accept this position.
6. NexStar will then ask you to select and center a second alignment star and press the ALIGN key. It is
best to choose alignment stars that are a good distance away from one another. Stars that are at least
40º to 60º apart from each other will give you a more accurate alignment than stars that are close to
each other.
Once the second star alignment is completed properly, the display will read Alignment Successful, and you will
hear the tracking motors turn-on and begin to track.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
EQ North / EQ South Alignment
EQ North and EQ South Alignments assist the user in aligning the
telescope when polar aligned on an optional equatorial wedge.
Just as with the Altazimuth alignments described earlier, the EQ
alignments gives you the choice of performing an AutoAlign or a
Two-Star alignment.
•
The EQ AutoAlign follows many of the same steps as
the Alt-Az Auto Two-Star Align, except it will ask you to
position the tube so that the index markers are aligned,
and then rotate the telescope base until the tube is
pointed towards the Meridian (see figure 2-2).
•
The EQ Two-Star Align requires the user to locate and
align the telescope on two bright stars. When selecting
alignment stars it is best to choose stars that, a) have a
large separation in azimuth and b) both are either
positive or negative in declination. Following these two
guidelines will result in a more accurate EQ Two-Star
alignment.
Figure 2-2
The Meridian is an imaginary line in the sky that
starts at the North celestial pole and ends at the
South celestial pole and passes through the
zenith. If you are facing South, the meridian
starts from your Southern horizon and passes
directly overhead to the North celestial pole.
NexStar Re-Alignment
The NexStar has a re-alignment feature which allows you to
replace either of the two original alignment stars with a new star or
celestial object. This can be useful in several situations for
example:
If you are observing over a period of a few hours, you may notice that your original two alignment stars have
drifted towards the west considerably. (Remember that the stars are moving at a rate of 15º every hour).
Aligning on a new star that is in the eastern part of the sky will improve your pointing accuracy, especially on
objects in that part of the sky.
To replace an existing alignment star with a new alignment star:
1. Select the desired star (or object) from the database and slew to it.
2. Carefully center the object in the eyepiece.
3. Once centered, press the UNDO button until you are at the main menu.
4. With NexStar Readydisplayed, press the ALIGN key on the hand control.
5. The display will then ask you which alignment star you want to replace. Use the UP and Down scroll
keys to select the alignment star to be replaced. It is usually best to replace the star closest to the new
object. This will space out your alignment stars across the sky.
6. Press ALIGN to make the change.
Object Catalog
Selecting an Object
Now that the telescope is properly aligned, you can choose an object from any of the catalogs in the NexStar's
extensive database. The hand control has a key (4) designated for each of the catalogs in its database. There
are two ways to select objects from the database: scrolling through the named object lists and entering object
numbers.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Pressing the LIST key on the hand control will access all objects in the database that have common names or
types. Each list is broken down into the following categories: Named Stars, Named Object, Double Stars,
Variable Stars, Asterisms and CCD Objects. Selecting any one of these catalogs will display a numeric-
alphabetical listing of the objects under that list. Pressing the Up and Down keys (10) allows you to scroll
through the catalog to the desired object.
Helpful
Hint
When scrolling through a long list of objects, holding down either the Up or Down key will allow you to scroll
through the catalog at a rapid speed.
Pressing any of the other catalog keys (M, CALD, NGC, or STAR) will display a blinking cursor below the name
of the catalog chosen. Use the numeric key pad to enter the number of any object within these standardized
catalogs. For example, to find the Orion Nebula, press the "M" key and enter "042".
Slewing to an Object
Once the desired object is displayed on the hand control screen, choose from the following options:
•
•
Press the INFO Key. This will give you useful information about the selected object such as R.A. and
declination, magnitude size and text information for many of the most popular objects.
Press the ENTER Key. This will automatically slew the telescope to the coordinates of the object.
Caution: Never slew the telescope when someone is looking into the eyepiece. The telescope can move at fast slew
speeds and may hit an observer in the eye.
If you slew to an object that is below the horizon, NexStar will notify you by displaying a message reminding you
that you have selected an object outside of your slew limits (see Slew Limits in the Utility Features section of the
manual). Press UNDO to go back and select a new object. Press ENTER to ignore the message and continue
the slew.
Object information can be obtained without having to do a star alignment. After the telescope is powered on,
pressing any of the catalog keys allows you to scroll through object lists or enter catalog numbers and view the
information about the object as described above.
Finding Planets
The NexStar can located all 8 of our solar systems planets plus the Moon and Sun. However, the hand control
will only display the solar system objects that are above the horizon (or within its filter limits). To locate the
planets, press the PLANET key on the hand control. The hand control will display all solar system objects that
are above the horizon:
•
•
•
Use the Up and Down keys to select the planet that you wish to observe.
Press INFO to access information on the displayed planet.
Press ENTER to slew to the displayed planet.
Tour Mode
The NexStar includes a tour feature which automatically allows the user to choose from a list of interesting
objects based on the date and time in which you are observing. The automatic tour will display only those objects
that are within your set filter limits (see Filter Limits in the Setup Procedures section of the manual). To activate
the Tour mode, press the TOUR key (6) on the hand control. The NexStar will display the best objects to observe
that are currently in the sky.
•
•
•
To see information and data about the displayed object, press the INFO key.
To slew to the object displayed, press ENTER.
To see the next tour object, press the Up key.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Direction Buttons
The NexStar has four direction buttons (3) in the center of the hand control which control the telescope's motion
in altitude (up and down) and azimuth (left and right). The telescope can be controlled at nine different speed
rates.
Rate Button
Pressing the RATE key (11) allows you to instantly change the speed rate of the motors from high speed slew
rate to precise guiding rate or anywhere in between. Each rate corresponds to a number on the hand controller
key pad. The number 9 is the fastest rate (6º per second, depending on power source) and is used for slewing
between objects and locating alignment stars. The number 1 on the hand control is the slowest rate (1x sidereal)
and can be used for accurate centering of objects in the eyepiece and photographic guiding. To change the
speed rate of the motors:
•
•
Press the RATE key on the hand control. The LCD will display the current speed rate.
Press the number on the hand control that corresponds to the desired speed. The number will appear
in the upper-right corner of the LCD display to indicate that the rate has been changed.
The hand control has a "double button" feature that allows you to instantly speed up the motors without having to
choose a speed rate. To use this feature, simply press the arrow button that corresponds to the direction that
you want to move the telescope. While holding that button down, press the opposite directional button. This will
increase the slew rate to the maximum slew rate.
When pressing the Up and Down arrow buttons in the slower slew rates (6 and lower) the motors will move the
telescope in the opposite direction than the faster slew rates (7 thru 9). This is done so that an object will move
in the appropriate direction when looking into the eyepiece (i.e. pressing the Up arrow button will move the star
up in the field of view of the eyepiece). However, if any of the slower slew rates (rate 6 and below) are used to
center an object in the finderscope, you may need to press the opposite directional button to make the telescope
move in the correct direction.
1 = 1x (sidereal)
2 = 2x
3 = 8x
6 = 128x
7 = 1.5º / sec
8 = 3º / sec
9 = 6º / sec
4 = 16x
5 = 64x
Nine available slew speeds
Setup Procedures
The NexStar contains many user defined setup functions designed to give the user control over the telescope's
many advanced features. All of the setup and utility features can be accessed by pressing the MENU key and
scrolling through the options:
Tracking Mode This allows you to change the way the telescope tracks depending on the type of mount
being used to support the telescope. The NexStar has three different tracking modes:
Alt-Az
This is the default tracking rate and is used when the telescope is
placed on a flat surface or tripod without the use of an equatorial
wedge. The telescope must be aligned with two stars before it
can track in altazimuth (Alt-Az).
19
Download from Www.Somanuals.com. All Manuals Search And Download.
EQ North
Used to track the sky when the telescope is polar aligned using an
equatorial wedge in the Northern Hemisphere.
EQ South Used to track the sky when the telescope is polar aligned using an
equatorial wedge in the Southern Hemisphere.
Off
When using the telescope for terrestrial (land) observation, the
tracking can be turned off so that the telescope never moves.
Tracking Rate
In addition to being able to move the telescope with the hand control buttons, the NexStar
will continually track a celestial object as it moves across the night sky. The tracking rate can be changed
depending on what type of object is being observed:
Sidereal
This rate compensates for the rotation of the Earth by moving the
telescope at the same rate as the rotation of the Earth, but in the
opposite direction. When the telescope is polar aligned, this can
be accomplished by moving the telescope in right ascension only.
When mounted in Alt-Az mode, the telescope must make
corrections in both altitude and azimuth.
Lunar
Solar
Used for tracking the moon when observing the lunar landscape.
Used for tracking the Sun when solar observing.
View Time-Site - Displays the last saved time and location information as well as other relevant time-site
information like time zone, daylight saving and local sidereal time. Local sidereal time (LST) is useful for knowing
the right ascension of celestial objects that are located on the meridian at that time. If you are using the optional
CN16 GPS module, View Time-Site will always display the current information downloaded from the GPS
receiver.
User Defined Objects - The NexStar can store up to 400 different user defined objects in its memory. The
objects can be daytime land objects or an interesting celestial object that you discover that is not included in the
regular database. There are several ways to save an object to memory depending on what type of object it is:
Save Sky Object:
The NexStar stores celestial objects to its database by saving its right ascension and
declination in the sky. This way the same object can be found each time the telescope is
aligned. Once a desired object is centered in the eyepiece, simply scroll to the "Save Sky
Obj" command and press ENTER. The display will ask you to enter a number between 1-
200 to identify the object. Press ENTER again to save this object to the database.
Save Land Object: The NexStar can also be used as a spotting scope on terrestrial objects. Fixed land
objects can be stored by saving their altitude and azimuth relative to the location of the
telescope at the time of observing. Since these objects are relative to the location of the
telescope, they are only valid for that exact location. To save land objects, once again
center the desired object in the eyepiece. Scroll down to the "Save Land Obj" command
and press ENTER. The display will ask you to enter a number between 1-200 to identify the
object. Press ENTER again to save this object to the database.
Enter R.A. - Dec:
You can also store a specific set of coordinates for an object just by entering the R.A. and
declination for that object. Scroll to the "Enter RA-DEC " command and press ENTER.
The display will then ask you to enter first the R.A. and then the declination of the desired
object.
GoTo Object:
To go to any of the user defined objects stored in the database, scroll down to either GoTo
Sky Obj or Goto Land Obj and enter the number of the object you wish to select and
press ENTER. NexStar will automatically retrieve and display the coordinates before
slewing to the object.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
To replace the contents of any of the user defined objects, simply save a new object using one of the existing
identification numbers; NexStar will replace the previous user defined object with the current one.
Get RA/DEC - Displays the right ascension and declination for the current position of the telescope.
Goto R.A/ Dec - Allows you to input a specific R.A. and declination and slew to it.
Scope Setup Features
MENU
Setup Time-Site - Allows the user to customize the NexStar display by
changing time and location parameters (such as time zone and daylight savings).
SCOPE SETUP
Anti-backlash – All mechanical gears have a certain amount of backlash or play
SETUP TIME-SITE
ANTI-BACKLASH
between the gears. This play is evident by how long it takes for a star to move in the
eyepiece when the hand control arrow buttons are pressed (especially when
changing directions). The NexStar's anti-backlash features allows the user to
AZM POSITIVE
AZM NEGATIVE
ALT POSITIVE
ALT NEGATIVE
compensate for backlash by inputting a value which quickly rewinds the motors just
enough to reduce the play between gears. The amount of compensation needed
depends on the slewing rate selected; the slower the slewing rate the longer it will
take for the star to appear to move in the eyepiece. Therefore, the anti-backlash
compensation will have to be set higher. You will need to experiment with different
values; a value between 20 and 50 is usually best for most visual observing,
whereas a higher value may be necessary for photographic guiding.
SLEW LIMITS
SLEW ALT MAX
SLEW ALT MIN
FILTER LIMITS
To set the anti-backlash value, scroll down to the anti-backlash option and press
ENTER. Enter a value from 0-99 for both azimuth and altitude and press ENTER
after each one to save these values. NexStar will remember these values and use
them each time it is turned on until they are changed.
ALTMAX IN LIST
ALTMIN IN LIST
DIRECTION BUTTONS
GOTO APPROACH
Slew Limits – Sets the limits in altitude that the telescope can slew without
displaying a warning message. By default the slew limits are set to 0º to 90º and will
only display a warning message if an object is below the horizon. However, the
slew limits can be customized depending on your needs. For example, if you have
certain photographic accessories attached to your telescope preventing it from
pointing straight-up, you can set the maximum altitude limit to read 80º, thus
preventing the telescope from pointing to any objects that are greater than 80º in
altitude without warning.
AZM APPROACH
ALT APPROACH
AUTOGUIDE RATES
AZM RATE
ALT RATE
CORDWRAP
UTILITIES
Filter Limits – When an alignment is complete, the NexStar automatically knows
which celestial objects are above the horizon. As a result, when scrolling through
the database lists (or selecting the Tour function), the NexStar hand control will
display only those objects that are known to be above the horizon when you are
observing. You can customize the object database by selecting altitude limits that
are appropriate for your location and situation. For example, if you are observing
from a mountainous location where the horizon is partially obscured, you can set
your minimum altitude limit to read +20º. This will make sure that the hand control
only displays objects that are higher in altitude than 20º. If you manually enter an
object that is below the horizon using the numeric keypad, the hand control will
display a warning message before slewing to the object.
GPS ON/OFF*
WEDGE ALIGN
LIGHT CONTROL
FACTORY SETTING
PRESS UNDO
PRESS "0"
VERSION
GET ALT-AZ
GOTO ATL-AZ
HIBERNATE
If you want to explore the entire object database, set the maximum altitude limit to
90º and the minimum limit to –90º. This will display every object in the database
lists regardless of whether it is visible in the sky from your location.
* Indicates features that require
the use of the optional CN16 GPS
accessory
Observing
Tip!
Direction Buttons –The direction a star moves in the eyepiece varies
depending on the accessories being used. This can create confusion when guiding
on a star using an off-axis guider versus a straight through guide scope. To compensate for this, the direction of
21
Download from Www.Somanuals.com. All Manuals Search And Download.
the drive control keys can be changed. To reverse the button logic of the hand control, press the MENU button
and select Direction Buttons from the Utilities menu. Use the Up/Down arrow keys (10) to select either the
azimuth (left and right) or altitude (up and down) button direction and press ENTER. Pressing ENTER again will
reverse the direction of the hand control buttons from their current state. Direction Buttons will only change the
eyepiece rates (rate 1-6) and will not affect the slew rates (rate 7-9).
Goto Approach - Lets the user define the direction that the telescope will approach when slewing to an
object. This allows the user the ability to minimize the effects of backlash For example, if your telescope is
back heavy from using heavy optical or photographic accessories attached to the back, you would want to set
your altitude approach to the negative direction. This would ensure that the telescope always approaches an
object from the opposite direction as the load pulling on the scope. Similarly, if using the NexStar polar aligned
on a wedge, you would want to set the azimuth approach to the direction that allows the scope to compensate for
different load level on the motors and gears when pointing in different parts of the sky.
To change the goto approach direction, simply choose Goto Approach from the Scope Setup menu, select either
Altitude or Azimuth approach, choose positive or negative and press Enter.
Autoguide Rate – Allows the user to set an autoguide rate as a percentage of sidereal rate. This is helpful
when calibrating your telescope to a CCD autoguider for long exposure photography.
Cordwrap - Cord wrap safeguards against the telescope slewing more than 360º in azimuth and wrapping
the power cord or accessory cables around the base of the telescope. This is useful when powering the
telescope with an optional AC adapter or any time that cables are plugged into the base of the telescope. When
you select “Cordwrap On” from the Scope Setup menu, you will be asked to move your telescope opposite to
the no-cross line. The no-cross line is a user definable line that the NexStar will not pass in order to slew to an
object; rather it will slew the long way around in order to get to the object. For example, if you want the no-cross
line to be towards due north, then you would need to slew the telescope in azimuth until the front of the tube is
pointing towards due south. Once in position, press Enter to set the no-cross line. By default, the cord wrap
feature is turned on once the telescope is aligned.
Utility Features
Scrolling through the MENU (9) options will also provide access to several advanced utility functions within the
NexStar such as; Wedge Align, Hibernate and all the optional GPS accessory functions as well.
GPS On/Off (with optional CN16 GPS Accessory)- Allows you to turn off the optional CN16 GPS
module. When aligning the telescope, the NexStar will receive information, such as current time, from the GPS.
If you want to use the NexStar database to find the coordinates of a celestial object for a future date you would
need to turn the GPS module off in order to manually enter a date and time other than the present.
Wedge Align – The NexStar has two equatorial wedge alignment modes (one for the northern hemisphere
and one for the southern) that will help you polar align your telescope when using an optional equatorial wedge.
For more information on using Wedge Align, see the Astronomy Basics section of the manual.
Light Control – This feature allows you to turn off both the red key pad light and LCD display for daytime use
to conserve power and to help preserve your night vision.
Factory Settings – Returns the NexStar hand control to its original factory setting. Parameters such as
backlash compensation values, initial date and time, longitude/latitude along with slew and filter limits will be
reset. However, stored parameters such as user defined objects will remain saved even when Factory Settings
is selected. The hand control will ask you to press the "0" key before returning to the factory default setting.
Version - Selecting this option will allow you to see the current version number of the hand control and motor
control software. The first number displayed is the hand control version, the second number is for the azimuth
motor control and the third number displayed is for the altitude motor control. If using the optional GPS
accessory, the second line of the LCD will display the current GPS and serial bus version.
Get Alt-Az - Displays the relative altitude and azimuth for the current position of the telescope.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Goto Alt-Az - Allows you to enter a specific altitude and azimuth position and slew to it.
Hibernate - Hibernate allows the NexStar to be completely powered down and still retain its alignment when
turned back on.
This not only saves power, but is ideal for those that have their telescopes permanently
mounted or leave their telescope in one location for long periods of time. To place your telescope in Hibernate
mode:
1. Select Hibernate from the Utility Menu.
2. Move the telescope to a desired position and press ENTER.
3. Power off the telescope. Remember to never move your telescope manually while in Hibernate mode.
Once the telescope is powered on again the display will read Wake Up. After pressing Enter you have the option
of scrolling through the time/site information to update the current setting. Press UNDO to edit the current setting
and enter the correct time and date. If you are using the CN16 GPS accessory, the GPS receiver will
automatically download the current date and time to the telescope.
Helpful
Hint
Pressing UNDO at the Wake Up screen allows you to explore many of the features of the hand control without
waking the telescope up from hibernate mode. To wake up the telescope after UNDO has been pressed, select
Hibernate from the Utility menu and press ENTER. Do not use the direction buttons to move the telescope while
in hibernate mode.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
NexStar Ready
MENU
ALIGNMENT
LIST
NAMED STAR
NAMED OBJECT
ASTERISM
TOUR
VARIABLE STAR
DOUBLE STAR
CCD OBJECTS
ABELL
TRACKING
MODE
AUTO TWO-STAR ALIGN
ENTER TIME
DST/STANDARD TIME
TIME ZONE
ENTER DATE- MM/DD/YY
ENTER LONGITUDE
WEST/EAST
ENTER LATITUDE
NORTH/SOUTH
ALT-AZ
EQ NORTH
EQ SOUTH
OFF
IC CATALOG
CALDWELL
MESSIER
RATE
NGC
SAO
SIDEREAL
SOLAR
SELECT STAR 1
SOLAR SYSTEM
LUNAR
Center Alignment Star 1
VIEW TIME-SITE
SCOPE SETUP
Center Alignment Star 2
TWO-STAR ALIGNMENT
SETUP TIME-SITE
ANTI-BACKLASH
SLEW LIMITS
ENTER TIME
DST/STANDARD TIME
TIME ZONE
ENTER DATE- MM/DD/YY
ENTER LONGITUDE
WEST/EAST
ENTER LATITUDE
NORTH/SOUTH
FILTER LIMITS
DIRECTION BUTTONS
GOTO APPROACH
AUTOGUIDE RATE
CORDWRAP
UTILITIES
GPS ON/OFF*
WEDGE ALIGN
LIGHT CONTROL
FACTORY SETTING
VERSION
GET ALT-AZ
GOTO ALT-AZ
HIBERNATE
SELECT STAR 1
CENTER STAR 1
SELECT STAR 2
CENTER STAR 2
USER OBJECTS
EQ ALIGNMENT
GOTO SKY OBJ
SAVE SKY OBJ
ENTER RA & DEC
SAVE LAND OBJ
GOTO LAND OBJ
GET RA-DEC
FIND INDEX AND MERIDIAN
EQ AUTOALIGN
EQ TWO-STAR ALIGN
GOTO RA-DEC
NexStar Menu Tree:
The following figure is a menu tree showing the sub-menus associated with the
primary command functions
24
Download from Www.Somanuals.com. All Manuals Search And Download.
A telescope is an instrument that collects and focuses light. The nature of the optical design determines how the light is focused.
Some telescopes, known as refractors, use lenses. Other telescopes, known as reflectors, use mirrors. The Schmidt-Cassegrain
optical system (or Schmidt-Cass for short) uses a combination of mirrors and lenses and is referred to as a compound or
catadioptric telescope. This unique design offers large-diameter optics while maintaining very short tube lengths, making them
extremely portable. The Schmidt-Cassegrain system consists of a zero power corrector plate, a spherical primary mirror, and a
secondary mirror. Once light rays enter the optical system, they travel the length of the optical tube three times.
Figure 3-1
A cutaway view of the light path of the Schmidt-Cassegrain optical design
The optics of the NexStar have Starbright coatings - enhanced multi-layer coatings on the primary and secondary
mirrors for increased reflectivity and a fully coated corrector for the finest anti-reflection characteristics.
Inside the optical tube, a black tube extends out from the center hole in the primary mirror. This is the primary baffle
tube and it prevents stray light from passing through to the eyepiece or camera.
Image Orientation
The image orientation changes depending on how the eyepiece is inserted into the telescope. When using the star
diagonal, the image is right-side-up, but reversed from left-to-right (i.e., reverted). If inserting the eyepiece directly
into the visual back (i.e., without the star diagonal), the image is upside-down and reversed from left-to-right (i.e.,
inverted). This is normal for the Schmidt-Cassegrain design.
Actual image orientation as
seen with the unaided eye
Inverted image, as viewed with
the eyepiece directly in
telescope
Reversed from left to right, as
viewed with a Star Diagonal
Figure 3-2
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Focusing
The NexStar's focusing mechanism controls the primary mirror which is mounted
on a ring that slides back and forth on the primary baffle tube. The focusing knob,
which moves the primary mirror, is on the rear cell of the telescope just below the
star diagonal and eyepiece. Turn the focusing knob until the image is sharp. If the
knob will not turn, it has reached the end of its travel on the focusing mechanism.
Turn the knob in the opposite direction until the image is sharp. Once an image is in
focus, turn the knob clockwise to focus on a closer object and counterclockwise for
a more distant object. A single turn of the focusing knob moves the primary mirror
only slightly. Therefore, it will take many turns (about 30) to go from close focus
(approximately 25 feet) to infinity.
For astronomical viewing, out of focus star images are very diffuse, making them
difficult to see. If you turn the focus knob too quickly, you can go right through focus
without seeing the image. To avoid this problem, your first astronomical target
should be a bright object (like the Moon or a planet) so that the image is visible even
when out of focus. Critical focusing is best accomplished when the focusing knob is
turned in such a manner that the mirror moves against the pull of gravity. In doing
so, any mirror shift is minimized. For astronomical observing, both visually and
photographically, this is done by turning the focus knob counterclockwise.
Figure 3-3
The emblem on the end of
the focus knob shows the
correct rotational direction
for focusing the NexStar.
Calculating Magnification
You can change the power of your telescope just by changing the eyepiece (ocular). To determine the magnification
of your telescope, simply divide the focal length of the telescope by the focal length of the eyepiece used. In
equation format, the formula looks like this:
Focal Length of Telescope (mm)
Magnification =
Focal Length of Eyepiece (mm)
Let’s say, for example, you are using the 25mm Plossl eyepiece. To determine the magnification you simply divide
the focal length of your telescope (the NexStar 8i has a focal length of about 2000mm) by the focal length of the
eyepiece, 25mm. Dividing 2000 by 25 yields a magnification of 80 power.
Although the power is variable, each instrument under average skies has a limit to the highest useful magnification.
The general rule is that 60 power can be used for every inch of aperture. For example, the NexStar is 8" in diameter.
Multiplying 8 by 60 gives a maximum useful magnification of 480 power. Although this is the maximum useful
magnification, most observing is done in the range of 20 to 35 power for every inch of aperture which is 160 to 280
times for the NexStar 8 telescope.
Determining Field of View
Determining the field of view is important if you want to get an idea of the angular size of the object you are
observing. To calculate the actual field of view, divide the apparent field of the eyepiece (supplied by the eyepiece
manufacturer) by the magnification. In equation format, the formula looks like this:
Apparent Field of Eyepiece
True Field =
Magnification
As you can see, before determining the field of view, you must calculate the magnification. Using the example in the
previous section, we can determine the field of view using the same 25mm eyepiece. The 25mm Plossl eyepiece
has an apparent field of view of 50°. Divide the 50° by the magnification, which is 80 power. This yields an actual
field of .63°, or a little more than a half of a degree.
To convert degrees to feet at 1,000 yards, which is more useful for terrestrial observing, simply multiply by 52.5.
Continuing with our example, multiply the angular field .63° by 52.5. This produces a linear field width of 33 feet at a
26
Download from Www.Somanuals.com. All Manuals Search And Download.
distance of one thousand yards. The apparent field of each eyepiece that Celestron manufactures is found in the
Celestron Accessory Catalog (#93685).
General Observing Hints
When working with any optical instrument, there are a few things to remember to ensure you get the best possible
image.
•
Never look through window glass. Glass found in household windows is optically imperfect, and as a result, may
vary in thickness from one part of a window to the next. This inconsistency can and will affect the ability to focus
your telescope. In most cases you will not be able to achieve a truly sharp image, while in some cases, you may
actually see a double image.
•
•
Never look across or over objects that are producing heat waves. This includes asphalt parking lots on hot
summer days or building rooftops.
Hazy skies, fog, and mist can also make it difficult to focus when viewing terrestrially. The amount of detail seen
under these conditions is greatly reduced. Also, when photographing under these conditions, the processed film
may come out a little grainier than normal with lower contrast and underexposed.
•
If you wear corrective lenses (specifically glasses), you may want to remove them when observing with an
eyepiece attached to the telescope. When using a camera, however, you should always wear corrective lenses
to ensure the sharpest possible focus. If you have astigmatism, corrective lenses must be worn at all times.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Up to this point, this manual covered the assembly and basic operation of your NexStar telescope.
However, to understand your telescope more thoroughly , you need to know a little about the night sky. This
section deals with observational astronomy in general and includes information on the night sky and polar
alignment.
The Celestial Coordinate System
To help find objects in the sky, astronomers use a celestial coordinate system that is similar to our
geographical coordinate system here on Earth. The celestial coordinate system has poles, lines of longitude
and latitude, and an equator. For the most part, these remain fixed against the background stars.
The celestial equator runs 360 degrees around the Earth and separates the northern celestial hemisphere
from the southern. Like the Earth's equator, it bears a reading of zero degrees. On Earth this would be
latitude. However, in the sky this is referred to as declination, or DEC for short. Lines of declination are
named for their angular distance above and below the celestial equator. The lines are broken down into
degrees, minutes of arc, and seconds of arc. Declination readings south of the equator carry a minus sign (-
) in front of the coordinate and those north of the celestial equator are either blank (i.e., no designation) or
preceded by a plus sign (+).
The celestial equivalent of longitude is called Right Ascension, or R.A. for short. Like the Earth's lines of
longitude, they run from pole to pole and are evenly spaced 15 degrees apart. Although the longitude lines
are separated by an angular distance, they are also a measure of time. Each line of longitude is one hour
apart from the next. Since the Earth rotates once every 24 hours, there are 24 lines total. As a result, the
R.A. coordinates are marked off in units of time. It begins with an arbitrary point in the constellation of
Pisces designated as 0 hours, 0 minutes, 0 seconds. All other points are designated by how far (i.e., how
long) they lag behind this coordinate after it passes overhead moving toward the west.
Figure 4-1
The celestial sphere seen from the outside showing R.A. and DEC.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Motion of the Stars
The daily motion of the Sun across the sky is familiar to even the most casual observer. This daily trek is
not the Sun moving as early astronomers thought, but the result of the Earth's rotation. The Earth's rotation
also causes the stars to do the same, scribing out a large circle as the Earth completes one rotation. The
size of the circular path a star follows depends on where it is in the sky. Stars near the celestial equator
form the largest circles rising in the east and setting in the west. Moving toward the north celestial pole, the
point around which the stars in the northern hemisphere appear to rotate, these circles become smaller.
Stars in the mid-celestial latitudes rise in the northeast and set in the northwest. Stars at high celestial
latitudes are always above the horizon, and are said to be circumpolar because they never rise and never
set. You will never see the stars complete one circle because the sunlight during the day washes out the
starlight. However, part of this circular motion of stars in this region of the sky can be seen by setting up a
camera on a tripod and opening the shutter for a couple hours. The processed film will reveal semicircles
that revolve around the pole. (This description of stellar motions also applies to the southern hemisphere
except all stars south of the celestial equator move around the south celestial pole.)
Figure 4-2
All stars appear to rotate around the celestial poles. However, the appearance of this motion varies
depending on where you are looking in the sky. Near the north celestial pole the stars scribe out
recognizable circles centered on the pole (1). Stars near the celestial equator also follow circular paths
around the pole. But, the complete path is interrupted by the horizon. These appear to rise in the east
and set in the west (2). Looking toward the opposite pole, stars curve or arc in the opposite direction
scribing a circle around the opposite pole (3).
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Polar Alignment (with optional Wedge)
Even though the NexStar can precisely track a celestial object while in the Alt-Az position, it is still necessary
to align the polar axis of the telescope (the fork arm) to the Earth's axis of rotation in order to do long
exposure astro photography. To do an accurate polar alignment, the NexStar requires an optional equatorial
wedge between the telescope and a tripod. This allows the telescope's tracking motors to rotate the
telescope around the celestial pole, the same way as the stars. Without the equatorial wedge, you would
notice the stars in the eyepiece would slowly rotate around the center of the field of view. Although this
gradual rotation would go unnoticed when viewing with an eyepiece, it would be very noticeable on film.
Polar alignment is the process by which the telescope's axis of rotation (called the polar axis) is aligned
(made parallel) with the Earth's axis of rotation. Once aligned, a telescope with a clock drive will track the
stars as they move across the sky. The result is that objects observed through the telescope appear
stationary (i.e., they will not drift out of the field of view). If not using the clock drive, all objects in the sky
(day or night) will slowly drift out of the field. This motion is caused by the Earth's rotation.
Wedge Align
Using the computerized hand control, the NexStar has two equatorial wedge alignment modes (one for the
northern hemisphere and one for the southern) that will help you polar align your telescope. After performing
either an EQ AutoAlign or Two-Star Alignment, Wedge Align will slew the telescope to where Polaris should
be. By using the tripod and wedge to center Polaris in the eyepiece, the fork arm (polar axis) will then be
pointing towards the actual North Celestial Pole. Once Wedge Align is complete, you must re-align your
telescope using either the EQ Two-Star or EQ AutoAlign methods. Follow these steps to Wedge Align the
NexStar in the Northern Hemisphere:
1. With the telescope set up on an optional equatorial wedge and roughly positioned towards Polaris,
align the NexStar using either the EQ AutoAlign or Two-Star Alignment method.
2. Select Wedge Align from the Utilities menu and press Enter.
3. Based on your current alignment, the NexStar will slew to where it thinks Polaris should be. Use
the tripod and wedge adjustments to place Polaris in the center of the eyepiece. Do not use the
direction buttons to position Polaris. Once Polaris is centered in the eyepiece press ENTER; the
polar axis should then be pointed towards the North Celestial Pole.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Finding the North Celestial Pole
In each hemisphere, there is a point in the sky around which all the other stars appear to rotate. These
points are called the celestial poles and are named for the hemisphere in which they reside. For example, in
the northern hemisphere all stars move around the north celestial pole. When the telescope's polar axis is
pointed at the celestial pole, it is parallel to the Earth's rotational axis.
Many methods of polar alignment require that you know how to find the
celestial pole by identifying stars in the area. For those in the northern
hemisphere, finding the celestial pole is not too difficult. Fortunately, we
have a naked eye star less than a degree away. This star, Polaris, is the
end star in the handle of the Little Dipper. Since the Little Dipper (technically
called Ursa Minor) is not one of the brightest constellations in the sky, it may
be difficult to locate from urban areas. If this is the case, use the two end
stars in the bowl of the Big Dipper (the pointer stars). Draw an imaginary line
through them toward the Little Dipper. They point to Polaris (see Figure 7-4).
The position of the Big Dipper changes during the year and throughout the
course of the night (see Figure 4-3). When the Big Dipper is low in the sky
(i.e., near the horizon), it may be difficult to locate. During these times, look
for Cassiopeia (see Figure 4-4). Observers in the southern hemisphere are
not as fortunate as those in the northern hemisphere. The stars around the
Figure 4-3 –
The position of the Big Dipper
changes throughout the year
south celestial pole are not nearly as bright as those around the north. The
closest star that is relatively bright is Sigma Octantis. This star is just within
naked eye limit (magnitude 5.5) and lies about 59 arc minutes from the pole.
and the night.
Definition
The north celestial pole is the point in the northern hemisphere around which all stars
appear to rotate. The counterpart in the southern hemisphere is referred to as the south
celestial pole.
Figure 4-4
The two stars in the front of the bowl of the Big Dipper point to Polaris which is less than one
degree from the true (north) celestial pole. Cassiopeia, the “W” shaped constellation, is on the
opposite side of the pole from the Big Dipper. The North Celestial Pole (N.C.P.) is marked by
the “+” sign.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
With your telescope set up, you are ready to use it for observing. This section covers visual observing hints
for both solar system and deep sky objects as well as general observing conditions which will affect your
ability to observe.
Observing the Moon
Often, it is tempting to look at the Moon when it is full. At this
time, the face we see is fully illuminated and its light can be
overpowering. In addition, little or no contrast can be seen
during this phase.
One of the best times to observe the Moon is during its partial
phases (around the time of first or third quarter). Long shadows
reveal a great amount of detail on the lunar surface. At low
power you will be able to see most of the lunar disk at one time.
The optional Reducer/Corrector lens allows for breath-taking
views of the entire lunar disk when used with a low power
eyepiece. Change to higher power (magnification) to focus in on
a smaller area. Choose the lunar tracking rate from the
NexStar's MENU tracking rate options to keep the moon centered in the eyepiece even at high
magnifications.
Lunar Observing Hints
To increase contrast and bring out detail on the lunar surface, use filters. A yellow filter works well at
improving contrast while a neutral density or polarizing filter will reduce overall surface brightness and glare.
Observing the Planets
Other fascinating targets include the five naked eye planets. You
can see Venus go through its lunar-like phases. Mars can reveal
a host of surface detail and one, if not both, of its polar caps.
You will be able to see the cloud belts of Jupiter and the great
Red Spot (if it is visible at the time you are observing). In
addition, you will also be able to see the moons of Jupiter as they
orbit the giant planet. Saturn, with its beautiful rings, is easily
visible at moderate power.
Planetary Observing Hints
•
Remember that atmospheric conditions are usually the
limiting factor on how much planetary detail will be
visible. So, avoid observing the planets when they are low on the horizon or when they are directly
over a source of radiating heat, such as a rooftop or chimney. See the "Seeing Conditions" section
later in this section.
•
To increase contrast and bring out detail on the planetary surface, try using Celestron eyepiece
filters.
Observing the Sun
Although overlooked by many amateur astronomers, solar observation is both rewarding and fun. However,
because the Sun is so bright, special precautions must be taken when observing our star so as not to
damage your eyes or your telescope.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Never project an image of the Sun through the telescope. Because of the folded optical design, tremendous
heat build-up will result inside the optical tube. This can damage the telescope and/or any accessories
attached to the telescope.
For safe solar viewing, use a solar filter that reduces the intensity of the Sun's light, making it safe to view.
With a filter you can see sunspots as they move across the solar disk and faculae, which are bright patches
seen near the Sun's edge.
Solar Observing Hints
•
•
The best time to observe the Sun is in the early morning or late afternoon when the air is cooler.
To center the Sun without looking into the eyepiece, watch the shadow of the telescope tube until it
forms a circular shadow.
•
To ensure accurate tracking, be sure to select the solar tracking rate.
Observing Deep Sky Objects
Deep-sky objects are simply those objects outside the boundaries of our solar system. They include star
clusters, planetary nebulae, diffuse nebulae, double stars and other galaxies outside our own Milky Way.
Most deep-sky objects have a large angular size. Therefore, low-to-moderate power is all you need to see
them. Visually, they are too faint to reveal any of the color seen in long exposure photographs. Instead,
they appear black and white. And, because of their low surface brightness, they should be observed from a
dark-sky location. Light pollution around large urban areas washes out most nebulae making them difficult,
if not impossible, to observe. Light Pollution Reduction filters help reduce the background sky brightness,
thus increasing contrast.
Seeing Conditions
Viewing conditions affect what you can see through your telescope during an observing session. Conditions
include transparency, sky illumination, and seeing. Understanding viewing conditions and the effect they
have on observing will help you get the most out of your telescope.
Transparency
Transparency is the clarity of the atmosphere which is affected by clouds, moisture, and other airborne
particles. Thick cumulus clouds are completely opaque while cirrus can be thin, allowing the light from the
brightest stars through. Hazy skies absorb more light than clear skies making fainter objects harder to see
and reducing contrast on brighter objects. Aerosols ejected into the upper atmosphere from volcanic
eruptions also affect transparency. Ideal conditions are when the night sky is inky black.
Sky Illumination
General sky brightening caused by the Moon, aurorae, natural airglow, and light pollution greatly affect
transparency. While not a problem for the brighter stars and planets, bright skies reduce the contrast of
extended nebulae making them difficult, if not impossible, to see. To maximize your observing, limit deep
sky viewing to moonless nights far from the light polluted skies found around major urban areas. LPR filters
enhance deep sky viewing from light polluted areas by blocking unwanted light while transmitting light from
certain deep sky objects. You can, on the other hand, observe planets and stars from light polluted areas or
when the Moon is out.
Seeing
Seeing conditions refers to the stability of the atmosphere and directly affects the amount of fine detail seen
in extended objects. The air in our atmosphere acts as a lens which bends and distorts incoming light rays.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
The amount of bending depends on air density. Varying temperature layers have different densities and,
therefore, bend light differently. Light rays from the same object arrive slightly displaced creating an
imperfect or smeared image. These atmospheric disturbances vary from time-to-time and place-to-place.
The size of the air parcels compared to your aperture determines the "seeing" quality. Under good seeing
conditions, fine detail is visible on the brighter planets like Jupiter and Mars, and stars are pinpoint images.
Under poor seeing conditions, images are blurred and stars appear as blobs.
The conditions described here apply to both visual and photographic observations.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
After looking at the night sky for a while you may want to try photographing it. Several forms of celestial
photography are possible with your telescope, including short exposure prime focus, eyepiece projection,
long exposure deep sky, terrestrial and even CCD imaging. Each of these is discussed in moderate detail
with enough information to get you started. Topics include the accessories required and some simple
techniques. More information is available in some of the publications listed at the end of this manual.
In addition to the specific accessories required for each type of celestial photography, there is the need for a
camera - but not just any camera. The camera does not have to have many of the features offered on
today's state-of-the-art equipment. For example, you don't need auto focus capability or mirror lock up.
Here are the mandatory features a camera needs for celestial photography. First, a “B” setting which allows
for time exposures. This excludes point and shoot cameras and limits the selection to SLR cameras, the
most common type of 35mm camera on the market today.
Second, the “B” or manual setting should NOT run off the battery. Many new electronic cameras use the
battery to keep the shutter open during time exposures. Once the batteries are drained, usually after a few
minutes, the shutter closes, whether you were finished with the exposure or not. Look for a camera that has
a manual shutter when operating in the time exposure mode. Olympus, Nikon, Minolta, Pentax, Canon and
others have made such camera bodies.
The camera must have interchangeable lenses so you can attach it to the telescope and so you can use a
variety of lenses for piggyback photography. If you can't find a new camera, you can purchase a used
camera body that is not 100-percent functional. The light meter, for example, does not have to be
operational since you will be determining the exposure length manually.
You also need a cable release with a locking function to hold the shutter open while you do other things.
Mechanical and air release models are available.
Short Exposure Prime Focus Photography
Short exposure prime focus photography is the best way to begin recording celestial objects. It is done with
the camera attached to the telescope without an eyepiece or camera lens in place. To attach your camera
you need the Celestron T-Adapter (#93633-A) and a T-Ring for your specific camera (i.e., Minolta, Nikon,
Pentax, etc.). The T-Ring replaces the 35mm SLR camera's normal lens. Prime focus photography allows
you to capture the majority of the lunar disk or solar disk. To attach your camera to your telescope.
1. Remove all visual accessories.
2. Thread the T-Ring onto the T-Adapter.
3. Mount your camera body onto the T-Ring the same as you would any other lens.
4. Thread the T-Adapter onto the back of the telescope while holding the camera in the desired orientation
(either vertical or horizontal).
With your camera attached to the telescope, you are ready for prime focus photography. Start with an easy
object like the Moon. Here's how to do it:
1. Load your camera with film that has a moderate-to-fast speed (i.e., ISO rating). Faster films are more
desirable when the Moon is a crescent. When the Moon is near full, and at its brightest, slower films
are more desirable. Here are some film recommendations:
35
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
•
•
T-Max 100
T-Max 400
Any 100 to 400 ISO color slide film
Fuji Super HG 400
Ektar 25 or 100
2. Center the Moon in the field of your NexStar telescope.
3. Focus the telescope by turning the focus knob until the image is sharp.
4. Set the shutter speed to the appropriate setting (see table below).
5. Trip the shutter using a cable release.
6. Advance the film and repeat the process.
Lunar Phase
Crescent
Quarter
Full
ISO 50
1/2
1/15
1/30
ISO 100
1/4
1/30
ISO 200
1/8
1/60
ISO 400
1/15
1/125
1/250
1/60
1/125
Table 6-1
Above is a listing of recommended exposure times when photographing the
Moon at the prime focus of your NexStar telescope.
The exposure times listed in table 6-1 should be used as a starting point. Always make exposures that are
longer and shorter than the recommended time. Also, take a few photos at each shutter speed. This will
ensure that you will get a good photo.
If using black and white film, try a yellow filter to reduce the light intensity and to increase contrast.
Keep accurate records of your exposures. This information is useful if you want to repeat your results or if
you want to submit some of your photos to various astronomy magazines for possible publication!
This technique is also used for photographing the Sun with the proper solar filter.
Eyepiece Projection
This form of celestial photography is designed for objects with small angular sizes, primarily the Moon and
planets. Planets, although physically quite large, appear small in angular size because of their great
distances. Moderate to high magnification is, therefore, required to make the image large enough to see
any detail. Unfortunately, the camera/telescope combination alone does not provide enough magnification
to produce a usable image size on film. In order to get the image large enough, you must attach your
camera to the telescope with the eyepiece in place. To do so, you need two additional accessories; a
deluxe tele-extender (#93643), which attaches to the visual back, and a T-ring for your particular camera
make (i.e., Minolta, Nikon, Pentax, etc.).
Because of the high magnifications during eyepiece projection, the field of view is quite small which makes it
difficult to find and center objects. To make the job a little easier, align the finder as accurately as possible.
This allows you to get the object in the telescope's field based on the finder's view alone.
Another problem introduced by the high magnification is vibration. Simply tripping the shutter even with a
cable release produces enough vibration to smear the image. To get around this, use the camera's self-
timer if the exposure time is less than one second a common occurrence when photographing the Moon.
For exposures over one second, use the "hat trick." This technique incorporates a hand-held black card
placed over the aperture of the telescope to act as a shutter. The card prevents light from entering the
telescope while the shutter is released. Once the shutter has been released and the vibration has
diminished (a few seconds), move the black card out of the way to expose the film. After the exposure is
complete, place the card over the front of the telescope and close the shutter. Advance the film and you're
ready for your next shot. Keep in mind that the card should be held a few inches in front of the telescope,
36
Download from Www.Somanuals.com. All Manuals Search And Download.
and not touching it. It is easier if you use two people for this process; one to release the camera shutter and
one to hold the card. Here's the process for making the exposure.
7. Find and center the desired target in the viewfinder of your camera.
8. Turn the focus knob until the image is as sharp as possible.
9. Place the black card over the front of the telescope.
10. Release the shutter using a cable release.
11. Wait for the vibration caused by releasing the shutter to diminish. Also, wait for a moment of good
seeing.
12. Remove the black card from in front of the telescope for the duration of the exposure (see
accompanying table).
13. Replace the black card over the front of the telescope.
14. Close the camera's shutter.
Advance the film and you are ready for your next exposure. Don't forget to take photos of varying duration
and keep accurate records of what you have done. Record the date, telescope, exposure duration,
eyepiece, f/ratio, film, and some comments on the seeing conditions.
The following table lists exposures for eyepiece projection with a 10mm eyepiece. All exposure times are
listed in seconds or fractions of a second.
Planet
Moon
Mercury
Venus
Mars
ISO 50
4
16
1/2
16
ISO 100
2
8
1/4
8
ISO 200
1
4
1/8
4
ISO 400
1/2
2
1/15
2
Jupiter
Saturn
8
16
4
8
2
4
1
2
Table 6-2
Recommended exposure time for photographing planets.
The exposure times listed here should be used as a starting point. Always make exposures that are longer
and shorter than the recommended time. Also, take a few photos at each shutter speed. This will ensure
that you get a good photo. It is not uncommon to go through an entire roll of 36 exposures and have only
one good shot.
NOTE: Don't expect to record more detail than you can see visually in the eyepiece at the time you are
photographing.
Once you have mastered the technique, experiment with different films, different focal length eyepieces, and
even different filters.
Long Exposure Prime Focus Photography
This is the last form of celestial photography to be attempted after others have been mastered. It is intended
primarily for deep sky objects, that is objects outside our solar system which includes star clusters, nebulae,
and galaxies. While it may seem that high magnification is required for these objects, just the opposite is
true. Most of these objects cover large angular areas and fit nicely into the prime focus field of your
telescope. The brightness of these objects, however, requires long exposure times and, as a result, are
rather difficult.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
There are several techniques for this type of photography, and the one chosen will determine the standard
accessories needed. The best method for long exposure deep sky astro photography is with an off-axis
guider. This device allows you to photograph and guide through the telescope simultaneously. Celestron
offers a very special and advanced off-axis guider, called the Radial Guider (#94176). In addition, you will
need a T-Ring to attach your camera to the Radial Guider.
Other equipment needs include a guiding eyepiece. Unlike other forms of astro photography which allows
for fairly loose guiding, prime focus requires meticulous guiding for long periods. To accomplish this you
need a guiding ocular with an illuminated reticle to monitor your guide star. For this purpose, Celestron
offers the Micro Guide Eyepiece (#94171) Here is a brief summary of the technique.
1. Polar align the telescope using an optional equatorial wedge.
2. Remove all visual accessories.
3. Thread the Radial Guider onto your telescope.
4. Thread the T-Ring onto the Radial Guider.
5. Mount your camera body onto the T-Ring the same as you would any other lens.
6. Set the shutter speed to the "B" setting.
7. Focus the telescope on a star.
8. Center your subject in the field of your camera.
9. Find a suitable guide star in the telescope field. This can be the most time consuming process.
10. Open the shutter using a cable release.
11. Monitor your guide star for the duration of the exposure using the buttons on the hand controller to
make the needed corrections.
12. Close the camera's shutter.
When getting started, use fast films to record as much detail in the shortest possible time. Here are proven
recommendations:
•
•
•
•
•
•
•
Ektar 1000 (color print)
Konica 3200 (color print)
Fujichrome 1600D (color slide)
3M 1000 (color slide)
Scotchchrome 400
T-Max 3200 (black and white print)
T-Max 400 (black and white print)
As you perfect your technique, try specialized films, that is films that are designed or specially treated for
celestial photography. Here are some popular choices:
•
•
•
•
Ektar 125 (color print)
Fujichrome 100D (color slide)
Tech Pan, gas hypered (black and white print)
T-Max 400 (black and white print)
There is no exposure determination table to help you get started. The best way to determine exposure
length is look at previously published photos to see what film/exposure combinations were used. Or take
unguided sample photos of various parts of the sky while the drive is running. Always take exposures of
various lengths to determine the best exposure time.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Terrestrial Photography
Your NexStar 8i makes an excellent 2000mm telephoto lens for terrestrial (land) photography (The NexStar
5i would be equivalent to a 1250mm lens). Terrestrial photography is best done will the telescope in Alt-Az
configuration and the tracking drive turned off so that objects will remain in your camera's field of view.
Metering
The NexStar has a fixed aperture and, as a result, fixed f/ratios. To properly expose your subjects
photographically, you need to set your shutter speed accordingly. Most 35mm SLR cameras offer through-
the-lens metering which lets you know if your picture is under or overexposed. Adjustments for proper
exposures are made by changing the shutter speed. Consult your camera manual for specific information on
metering and changing shutter speeds.
Reducing Vibration
Releasing the shutter manually can cause vibrations, producing blurred photos. To reduce vibration when
tripping the shutter, use a cable release. A cable release keeps your hands clear of the camera and lens,
thus eliminating the possibility of introducing vibration. Mechanical shutter releases can be used, though air-
type releases are best.
Blurry pictures can also result from shutter speeds that are too slow. To prevent this, use films that produce
shutter speeds greater than 1/250 of a second when hand-holding the lens. If the lens is mounted on a
tripod, the exposure length is virtually unlimited.
Another way to reduce vibration is with the Vibration Suppression Pads (#93503). These pads rest between
the ground and tripod feet. They reduce the vibration amplitude and vibration time.
CCD Imaging
CCD Imaging is the most challenging form of astro photography and involves the use of a CCD (Charged
Coupled Device) camera attached to the telescope at prime focus. The benefits of CCD imaging is the
extreme light sensitivity of the electronic chip inside the camera. This allows you to record much fainter
detail in a shorter period of time than would be possible with film photography. Due to the relative small size
of the CCD chip, the field of view when imaging will be less than the field of view of a film camera. Using
Celestron's optional f/6.3 Reducer/Corrector accessory in conjunction with a CCD camera (or film camera)
will greatly increase the photographic field of view and will make finding and tracking a celestial object much
easier.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
While your NexStar telescope requires little maintenance, there are a few things to remember that will ensure your
telescope performs at its best.
Care and Cleaning of the Optics
Occasionally, dust and/or moisture may build up on the corrector plate of your telescope. Special care should be
taken when cleaning any instrument so as not to damage the optics.
If dust has built up on the corrector plate, remove it with a brush (made of camel’s hair) or a can of pressurized air.
Spray at an angle to the lens for approximately two to four seconds. Then, use an optical cleaning solution and white
tissue paper to remove any remaining debris. Apply the solution to the tissue and then apply the tissue paper to the
lens. Low pressure strokes should go from the center of the corrector to the outer portion. Do NOT rub in circles!
You can use a commercially made lens cleaner or mix your own. A good cleaning solution is isopropyl alcohol mixed
with distilled water. The solution should be 60% isopropyl alcohol and 40% distilled water. Or, liquid dish soap
diluted with water (a couple of drops per one quart of water) can be used.
Occasionally, you may experience dew build-up on the corrector plate of your telescope during an observing session.
If you want to continue observing, the dew must be removed, either with a hair dryer (on low setting) or by pointing
the telescope at the ground until the dew has evaporated.
If moisture condenses on the inside of the corrector, remove the accessories from the rear cell of the telescope.
Place the telescope in a dust-free environment and point it down. This will remove the moisture from the telescope
tube.
To minimize the need to clean your telescope, replace all lens covers once you have finished using it. Since the rear
cell is NOT sealed, the cover should be placed over the opening when not in use. This will prevent contaminants from
entering the optical tube.
Internal adjustments and cleaning should be done only by the Celestron repair department. If your telescope is in
need of internal cleaning, please call the factory for a return authorization number and price quote.
Collimation
The optical performance of your NexStar telescope is directly
Corrector
related to its collimation, that is the alignment of its optical
system. Your NexStar was collimated at the factory after it
was completely assembled. However, if the telescope is
dropped or jarred severely during transport, it may have to be
collimated. The only optical element that may need to be
adjusted, or is possible, is the tilt of the secondary mirror.
Plate
To check the collimation of your telescope you will need a light
source. A bright star near the zenith is ideal since there is a
minimal amount of atmospheric distortion. Make sure that
tracking is on so that you won’t have to manually track the star.
Or, if you do not want to power up your telescope, you can use
Polaris. Its position relative to the celestial pole means that it
moves very little thus eliminating the need to manually track it.
Collimation
Screws
Before you begin the collimation process, be sure that your
telescope is in thermal equilibrium with the surroundings.
Allow 45 minutes for the telescope to reach equilibrium if you
move it between large temperature extremes.
Figure 7-1
The three collimation screws are located on the
secondary mirror holder in the center of the
corrector plate.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
To verify collimation, view a star near the zenith. Use a medium to high power ocular — 12mm to 6mm focal length.
It is important to center a star in the center of the field to judge collimation. Slowly cross in and out of focus and
judge the symmetry of the star. If you see a systematic skewing of the star to one side, then recollimation is needed.
Figure 7-2 -- Even though the star pattern appears the same on both sides of focus, they are
asymmetric. The dark obstruction is skewed off to the left side of the diffraction pattern indicating
poor collimation.
To accomplish this, you need to tighten the secondary collimation screw(s) that move the star across the field toward
the direction of the skewed light. These screws are located in the secondary mirror holder (see figure 10-1). To
access the collimation screws you will need to remove the cap that covers the secondary mirror holder. To remove
the cap, gently slide a flat head screwdriver underneath one end of the cap and twist the screwdriver. Slide the
screwdriver underneath the other side of the cap and twist until the cap comes off. Make only small 1/6 to 1/8
adjustments to the collimation screws and re-center the star by moving the scope before making any improvements
or before making further adjustments.
To make collimation a simple procedure, follow these easy steps:
1. While looking through a medium to high power eyepiece, de-focus a bright star until a ring pattern with a dark
shadow appears (see figure 7-2). Center the de-focused star and notice in which direction the central shadow is
skewed.
2. Place your finger along the edge of the front cell of the telescope (be careful not to touch the corrector plate),
pointing towards the collimation screws. The shadow of your finger should be visible when looking into the
eyepiece. Rotate your finger around the tube edge until its shadow is seen closest to the narrowest portion of
the rings (i.e. the same direction in which the central shadow is skewed).
3. Locate the collimation screw closest to where your finger is positioned. This will be the collimation screw you will
need to adjust first. (If your finger is positioned exactly between two of the collimation screws, then you will need
to adjust the screw opposite where your finger is located).
4. Use the hand control buttons to move the de-focused star image to the edge of the field of view, in the same
direction that the central obstruction of the star image is skewed.
5. While looking through the eyepiece, use an Allen wrench to turn the collimation screw
you located in step 2 and 3. Usually a tenth of a turn is enough to notice a change in
collimation. If the star image moves out of the field of view in the direction that the
central shadow is skewed, than you are turning the collimation screw the wrong way.
Turn the screw in the opposite direction, so that the star image is moving towards the
center of the field of view.
6. If while turning you notice that the screws get very loose, then simply tighten the other
two screws by the same amount. Conversely, if the collimation screw gets too tight,
then loosen the other two screws by the same amount.
Figure 7-3
A collimated telescope
7.
Once the star image is in the center of the field of view, check to see if the rings are
concentric. If the central obstruction is still skewed in the same direction, then
continue turning the screw(s) in the same direction. If you find that the ring pattern is
skewed in a different direction, than simply repeat steps 2 through 6 as described
above for the new direction.
should appear
symmetrical with the
central obstruction
centered in the star's
diffraction pattern.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Perfect collimation will yield a star image very symmetrical just inside and outside of focus. In addition, perfect
collimation delivers the optimal optical performance specifications that your telescope is built to achieve.
If seeing (i.e., air steadiness) is turbulent, collimation is difficult to judge. Wait until a better night if it is turbulent or
aim to a steadier part of the sky. A steadier part of the sky is judged by steady versus twinkling stars.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
You will find that additional accessories enhance your viewing pleasure and expand the usefulness of your
telescope. For ease of reference, all the accessories are listed in alphabetical order.
Adapter AC (#18773) - Allow DC (battery powered) telescopes to be converted for use with 120 volt AC power.
Adapter, Car Battery (#18769) -
Celestron offers the Car Battery Adapter that allows you to run the NexStar
drive off an external power source. The adapter attaches to the cigarette
lighter of your car, truck, van, or portable power supply.
Barlow Lens - A Barlow lens is a negative lens that increases the focal
length of a telescope. Used with any eyepiece, it doubles the magnification
of that eyepiece. Celestron offers two Barlow lens in the 1-1/4" size for the
NexStar. The 2x Ultima Barlow (#93506) is a compact triplet design that is
fully multicoated for maximum light transmission and parfocal when used
with the Ultima eyepieces. Model #93507 is a compact achromatic Barlow
lens that is under three inches long and weighs only 4 oz. It works very well
with all Celestron eyepieces.
Carrying Case (#302070) - This rugged case is constructed of space age resin, making it waterproof,
unbreakable, airtight and extremely durable. It’s designed so your telescope can be packed with the standard
finderscope in place, a convenience you’ll be sure to appreciate. The case is lined with die cut foam for custom
fitting. It features large handles and is equipped with wheels, for easy transportation. Weight: 17 lbs. (31.5"x
21.75"x 11.5").
CD-ROM (#93700) - Celestron and Software Bisque have joined together to present this comprehensive CD-
ROM called The Sky™ Level 1 - from Celestron. It features a 10,000 object database, 75 color images,
horizontal projection, custom sky chart printing, zoom capability and more! A fun, useful and educational
product.
CN16 GPS Accessory (#93963) - Plug in this 16-channel GPS module into your
telescopes drive base port to link up and automatically download information from
one of many global positioning satellites.
Erect Image Diagonal (#94112-A) - This accessory is an Amici prism arrangement
that allows you to look into the telescope at a 45° angle with images that are
oriented properly (upright and correct from left-to-right). It is useful for daytime,
terrestrial viewing.
Eyepieces - Like telescopes, eyepieces come in a variety of designs. Each design
has its own advantages and disadvantages. For the 1-1/4" barrel diameter there
are four different eyepiece designs available.
• OMNI Plössl - Plössl eyepieces have a 4-element lens designed for low-
to-high power observing. All are fully multi-coated for maximum light
transmission. These Plössls offer razor sharp views across the entire field,
even at the edges! In the 1-1/4" barrel diameter, they are available in the
following focal lengths: 3.6mm, 6mm, 8mm, 10mm, 13mm, 17mm, 25mm,
32mm and 40mm.
•
Ultima - Ultima is not really a design, but a trade name for our 5-element,
wide field eyepieces. In the 1-1/4" barrel diameter, they are available in the
following focal lengths: 5mm, 7.5mm, 12.5mm, 18mm, 30mm, 35mm, and
42mm. These eyepieces are all parfocal. The 35mm Ultima gives the
43
Download from Www.Somanuals.com. All Manuals Search And Download.
widest possible field of view with a 1-1/4" diagonal and is ideal for the NexStar with or without the
Reducer/Corrector.
• X-CEL - Fully Multi-coated. All air-to-glass surfaces have 5 layer multi-coating. Field of view 55°. Six
element optical design using ED glass on most curved elements. Parfocal – little to no focusing
adjustments are needed when switching from a low power to high power eyepiece. 20mm eye relief
and soft rubber eyecups. Blackened lens edges to minimizes internal reflection and improved contrast.
Each eyepiece comes in a durable plastic case.
Filters, Eyepiece - To enhance your visual observations of solar system objects, Celestron offers a wide range
of colored eyepiece filter sets that thread into the 1-1/4" oculars. Available sets are:
#94119-10 – Orange, Light Blue, ND13%T, Polarizing (#s 21, 80A, 96ND-13, Polarizing)
#94119-20 - Deep Yellow, Red, Light Green, ND25% T (#s 12, 25, 56, 96ND-25)
#94119-30 - Light Red, Blue, Green, ND50% T (#s 23A, 38A, 58, 96ND-50)
#94119-40 - Yellow, Deep Yellow, Violet, Pale Blue (#s 8, 15, 47, 82A)
Night Vision Flashlight - (#93588) - Celestron’s premium model for astronomy, using two red LEDs to preserve
night vision better than red filters or other devices. Brightness is adjustable. Operates on a single 9 volt battery
(included).
Light Pollution Reduction (LPR) Filters - These filters are designed to enhance your views of deep sky
astronomical objects when viewed from urban areas. LPR Filters selectively reduce the transmission of certain
wavelengths of light, specifically those produced by artificial lights. This includes mercury and high and low
pressure sodium vapor lights. In addition, they also block unwanted natural light (sky glow) caused by neutral
oxygen emission in our atmosphere. Celestron offers a model for 1-1/4" eyepieces (#94126A) and a model that
attaches to the rear cell ahead of the star diagonal and visual back (#94127A).
Micro Guide Eyepiece (#94171) - This multipurpose 12.5mm illuminated reticle can be used for guiding deep-
sky astrophotos, measuring position angles, angular separations, and more. The laser etched reticle provides
razor sharp lines and the variable brightness illuminator is completely cordless. The micro guide eyepiece
produces 163 power when used with the NexStar 8i at f/10.
Moon Filter (#94119-A) - Celestron’s Moon Filter is an economical eyepiece filter for reducing the brightness of
the moon and improving contrast, so greater detail can be observed on the lunar surface. The clear aperture is
21mm and the transmission is about 18%.
Piggyback Mount, NexStar 8i (#93598) - A great accessory for all observers interested in deep-sky
astrophotography, particularly beginners. This mount allows you to attach your camera,
with its lens, to either the top or side of the telescope, making it possible to shoot with a
normal or wide angle lens while guiding through the telescope.
PowerTank (#18774) – 12v 7Amp hour rechargeable power supply. Comes with two 12v
output cigarette outlets, built-in red flash light , Halogen emergency spotlight. 120v AC
adapter and cigarette lighter adapter included.
Polarizing Filter Set (#93608) - The polarizing filter set limits the transmission of light to
a specific plane, thus increasing contrast between various objects. This is used primarily
for terrestrial, lunar and planetary observing.
®
Radial Guider (#94176) - The Celestron Radial Guider is specifically designed
for use in prime focus, deep sky astrophotography and takes the place of the T-
Adapter. This device allows you to photograph and guide simultaneously through
the optical tube assembly of your telescope. This type of guiding produces the
best results since what you see through the guiding eyepiece is exactly
reproduced on the processed film. The Radial Guider is a “T”-shaped assembly
that attaches to the rear cell of the telescope. As light from the telescope enters
the guider, most passes straight through to the camera. A small portion,
however, is diverted by a prism at an adjustable angle up to the guiding eyepiece.
This guider has two features not found on other off-axis guiders; first, the prism
44
Download from Www.Somanuals.com. All Manuals Search And Download.
and eyepiece housing rotate independently of the camera orientation making the acquisition of a guide star quite
easy. Second, the prism angle is tunable allowing you to look at guide stars on-axis. This accessory works
especially well with the Reducer/Corrector.
Reducer/Corrector (#94175) - This lens reduces the focal length of the telescope
by 37%, making your NexStar a 1280mm f/6.3 instrument. In addition, this unique
lens also corrects inherent aberrations to produce crisp images all the way across
the field when used visually. When used photographically, there is some
vignetting that produces a 26mm circular image on the processed film. It also
increases the field of view significantly and is ideal for wide-field, deep-space
viewing. It is also perfect for beginning prime focus, long-exposure astro
photography when used with the radial guider. It makes guiding easier and
exposures much shorter.
Sky Maps (#93722) - Celestron Sky Maps are the ideal teaching guide for
learning the night sky. You wouldn’t set off on a road trip without a road map, and you don’t need to try to
navigate the night sky without a map either. Even if you already know your way around the major constellations,
these maps can help you locate all kinds of fascinating objects.
Skylight Filter (#93621) - The Skylight Filter is used on the Celestron NexStar
telescope as a dust seal. The filter threads onto the rear cell of your telescope.
All other accessories, both visual and photographic (with the exception of Barlow
lenses), thread onto the skylight filter. The light loss caused by this filter is
minimal.
Solar Filter – (#94162) The AstroSolar® filter is a safe and durable filter that
covers the front opening of the telescope. View sunspots and other solar features
using this double-sided metal coated filter for uniform density and good color
balance across the entire field. The Sun offers constant changes and will keep
your observing interesting and fun.
T-Adapter (#93633-A) - T-Adapter (with additional T-Ring) allows you to attach
your SLR camera to the rear cell of your Celestron NexStar. This turns your NexStar into a high power telephoto
lens perfect for terrestrial photography and short exposure lunar and filtered solar photography.
T-Ring - The T-Ring couples your 35mm SLR camera body to the T-Adapter, radial guider, or tele-extender.
This accessory is mandatory if you want to do photography through the telescope. Each camera make (i.e.,
Minolta, Nikon, Pentax, etc.) has its own unique mount and therefore, its own T-Ring. Celestron has 8 different
models for 35mm cameras.
Tele-Extender, Deluxe (#93643) - The tele-extender is a hollow tube that allows you to attach a camera to the
telescope when the eyepiece is installed. This accessory is used for eyepiece projection photography which
allows you to capture very high power views of the Sun, Moon, and planets on film. The tele-extender fits over
the eyepiece onto the visual back. This tele-extender works with eyepieces that have large housings, like the
Celestron Ultima series.
Vibration Suppression Pads (#93503) - These pads rest between the ground and tripod feet of your telescope.
They reduce the amplitude and vibration time of your telescope when shaken by the wind or an accidental bump.
This accessory is a must for long exposure prime focus photography.
Wedge, NexStar (#93658) – The wedge allows you to tilt the telescope so that its polar axis is parallel to the
earth's axis of rotation. Ideal for using your NexStar for guided astro photography.
A full description of all Celestron accessories can be found in the Celestron Accessory Catalog (#93685)
45
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX A – TECHNICAL SPECIFICATIONS
Optical Specification
11022-XLT-SE
Design
Aperture
NexStar 8i
Schmidt-Cassegrain Catadioptric
8 inches (203.2mm)
Focal Length
80 inches (2032mm)
F/ratio of the Optical System
10
Primary Mirror:
Material
Coatings
Fine Annealed Pyrex
Starbright XLT Coating
Hand Figured Fine Annealed Pyrex
Starbright XLT Coating
2.5” (10% by area)
Secondary Mirror: Material
Coatings
Central Obstruction
Corrector Plate:
Material
Coatings
Optical Quality Crown Glass
MgF2 Coatings both sides
480x ( ~ 4mm eyepiece)
29x ( ~ 70mm eyepiece)
Highest Useful Magnification
Lowest Useful Magnification (7mm
exit pupil)
Resolution: Rayleigh Criterion
Dawes Limit
Photographic Resolution
Light Gathering Power
Near Focus standard eyepiece or
camera
.68 arc seconds
.57arc seconds
200 lines/mm
843x unaided eye
~ 25 feet
Field of View: Standard Eyepiece
: 35mm Camera
.64º
1.0º x .68º (1.6º x 1.07º - with optional
Reducer Corrector)
Linear Field of View (at 1000 yds)
Magnification: Standard Eyepiece
: Camera
34 feet
81x
41x
Optical Tube Length
Weight of Telescope
17 inches
24 Lbs.
Electronic Specifications
Input Voltage
12 V DC Nominal
18 V DC Max.
8 V DC Min.
Maximum
Minimum
Batteries Required
Power Supply Requirements
8 AA Alkaline
12 VDC-750 mA (Tip positive)
Mechanical Specifications
Motor: Type
DC Servo motors with encoders, both axes
Resolution
.26 arc sec in Azimuth, .32 arc sec in altitude
Fork Arm
Cast aluminum, with integrated hand control receptacle
Electronic Hand Control Specifications
Slew speeds
Tracking Modes
Six slew speeds: 6º /sec, 2º /sec, 128x, 64x, 16x, 8x
Alt-Az, EQ North, EQ South , Off
Optional Computerized Hand Control Specifications
Hand Control
Double line, 16 character Liquid Crystal Display
19 fiber optic backlit LED buttons
Slew speeds
Software Precision
Ports
Tracking Rates
Tracking Modes
Alignment Procedures
Database
Nine slew speeds: 6º /sec, 3º /sec, 1.5º/sec, 128x, 64x, 16x, 8x, 2x, 1x
24bit, 0.08 arcsec calculations
RS-232 communication port on hand control
Sidereal, Solar and Lunar
Alt-Az, EQ North & EQ South
2-Star Alignment, Auto Two-Star Align, EQ North/South
40,000+ objects
400 user defined programmable objects.
Enhanced information on over 200 objects
Complete Revised NGC Catalog
7,840
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Complete Messier Catalog
Complete IC Catalog
Complete Caldwell
110
5,386
109
Solar System objects
Abell Galaxies
Famous Asterisms
9
2,712
20
Selected CCD Imaging Objects
Selected SAO Stars
Total Object Database
25
29,500
45,492
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B – Glossary of Terms
A-
Absolute magnitude
The apparent magnitude that a star would have if it were observed from a standard distance
of 10 parsecs, or 32.6 light-years. The absolute magnitude of the Sun is 4.8. at a distance of
10 parsecs, it would just be visible on Earth on a clear moonless night away from surface
light.
Airy disk
The apparent size of a star's disk produced even by a perfect optical system. Since the
star can never be focused perfectly, 84 per cent of the light will concentrate into a single
disk, and 16 per cent into a system of surrounding rings.
A telescope mounting using two independent rotation axis allowing movement of the
instrument in Altitude and Azimuth.
Alt-Azimuth Mounting
Altitude
In astronomy, the altitude of a celestial object is its Angular Distance above or below the
celestial horizon.
Altitude
In astronomy, the altitude of a celestial object is its Angular Distance above or below the
celestial horizon.
Aperture
the diameter of a telescope's primary lens or mirror; the larger the aperture, the greater the
telescope’s light-gathering power.
Apparent Magnitude
A measure of the relative brightness of a star or other celestial object as perceived by an
observer on Earth.
Arcminute
Arcsecond
Asterism
Asteroid
A unit of angular size equal to 1/60 of a degree.
A unit of angular size equal to 1/3,600 of a degree (or 1/60 of an arcminute).
A small unofficial grouping of stars in the night sky.
A small, rocky body that orbits a star.
Astrology
the pseudoscientific belief that the positions of stars and planets exert an influence on
human affairs; astrology has nothing in common with astronomy
Astronomical unit
Aurora
The distance between the Earth and the Sun. It is equal to 149,597,900 km., usually
rounded off to 150,000,000 km.
the emission of light when charged particles from the solar wind slam into and excite
atoms and molecules in a planet’s upper atmosphere.
Azimuth
The angular distance of an object eastwards along the horizon, measured from due north,
between the astronomical meridian (the vertical line passing through the center of the sky
and the north and south points on the horizon) and the vertical line containing the celestial
body whose position is to be measured. .
B -
Binary Stars
Binary stars are pairs of stars that, because of their mutual gravitational attraction, orbit
around a common Center of Mass. If a group of three or more stars revolve around one
another, it is called a multiple system. It is believed that approximately 50 percent of all
stars belong to binary or multiple systems. Systems with individual components that can be
seen separately by telescope are called visual binaries or visual multiples. The nearest
"star" to our solar system, Alpha Centauri, is actually our nearest example of a multiple star
system, it consists of three stars two very similar to our Sun and one dim, small, red star
orbiting around one another.
C -
Celestial Equator
The projection of the Earth's equator on to the celestial sphere. It divides the sky into two
equal hemispheres.
Celestial pole
the imaginary projection of Earth’s rotational axis north or south pole onto the celestial
sphere.
Celestial Sphere
Collimation
D -
An imaginary sphere surrounding the Earth, concentric with the Earth's center.
the act of putting a telescope’s optics into perfect alignment.
Declination
The angular distance of a celestial body north or south of the celestial equator. It may be
said to correspond to latitude on the surface of the Earth.
E -
Ecliptic
The projection of the Earth's orbit on to the celestial sphere. It may also be defined as "the
apparent yearly path of the Sun against the stars".
Equatorial mount
F -
A telescope mounting in which the instrument is set upon an axis which is parallel to the
axis of the Earth; the angle of the axis must be equal to the observer's latitude.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Focal length
The distance between a lens (or mirror) and the point at which the image of an object at
infinity is brought to focus. The focal length divided by the aperture of the mirror or lens is
termed the focal ratio.
J -
Jovian Planets
Any of the four gas giant planets that are at a greater distance form the sun than the
terrestrial planets.
K -
Kuiper Belt
A region beyond the orbit of Neptune extending to about 1000 AU which is a source of
many short period comets.
L -
Light-Year
A light-year is the distance light traverses in a vacuum in one year at the speed of 299,792
km/ sec. With 31,557,600 seconds in a year, the light-year equals a distance of 9.46 X 1
trillion km (5.87 X 1 trillion mi).
M -
Magnitude
Magnitude is a measure of the brightness of a celestial body. The brightest stars are
assigned magnitude 1 and those increasingly fainter from 2 down to magnitude 5. The
faintest star that can be seen without a telescope is about magnitude 6. Each magnitude
step corresponds to a ratio of 2.5 in brightness. Thus a star of magnitude 1 is 2.5 times
brighter than a star of magnitude 2, and 100 times brighter than a magnitude 5 star. The
brightest star, Sirius, has an apparent magnitude of -1.6, the full moon is -12.7, and the
Sun's brightness, expressed on a magnitude scale, is -26.78. The zero point of the
apparent magnitude scale is arbitrary.
Meridian
Messier
A reference line in the sky that starts at the North celestial pole and ends at the South
celestial pole and passes through the zenith. If you are facing South, the meridian starts
from your Southern horizon and passes directly overhead to the North celestial pole.
A French astronomer in the late 1700’s who was primarily looking for comets. Comets are
hazy diffuse objects and so Messier cataloged objects that were not comets to help his
search. This catalog became the Messier Catalog, M1 through M110.
N -
Nebula
Interstellar cloud of gas and dust. Also refers to any celestial object that has a cloudy
appearance.
North Celestial Pole
Nova
The point in the Northern hemisphere around which all the stars appear to rotate. This is
caused by the fact that the Earth is rotating on an axis that passes through the North and
South celestial poles. The star Polaris lies less than a degree from this point and is
therefore referred to as the "Pole Star".
Although Latin for "new" it denotes a star that suddenly becomes explosively bright at the
end of its life cycle.
O -
Open Cluster
One of the groupings of stars that are concentrated along the plane of the Milky Way. Most
have an asymmetrical appearance and are loosely assembled. They contain from a dozen
to many hundred stars.
P -
Parallax
Parallax is the difference in the apparent position of an object against a background when
viewed by an observer from two different locations. These positions and the actual position
of the object form a triangle from which the apex angle (the parallax) and the distance of
the object can be determined if the length of the baseline between the observing positions
is known and the angular direction of the object from each position at the ends of the
baseline has been measured. The traditional method in astronomy of determining the
distance to a celestial object is to measure its parallax.
Parfocal
Refers to a group of eyepieces that all require the same distance from the focal plane of
the telescope to be in focus. This means when you focus one parfocal eyepiece all the
other parfocal eyepieces, in a particular line of eyepieces, will be in focus.
The distance at which a star would show parallax of one second of arc. It is equal to 3.26
light-years, 206,265 astronomical units, or 30,8000,000,000,000 km. (Apart from the Sun,
no star lies within one parsec of us.)
Parsec
Point Source
An object which cannot be resolved into an image because it to too far away or too small is
considered a point source. A planet is far away but it can be resolved as a disk. Most
stars cannot be resolved as disks, they are too far away.
R -
Reflector
Resolution
A telescope in which the light is collected by means of a mirror.
The minimum detectable angle an optical system can detect. Because of diffraction, there
is a limit to the minimum angle, resolution. The larger the aperture, the better the
49
Download from Www.Somanuals.com. All Manuals Search And Download.
resolution.
Right Ascension: (RA)
the angular distance of a celestial object measured in hours, minutes, and seconds along
the Celestial Equator eastward from the Vernal Equinox.
S -
Schmidt Telescope
Rated the most important advance in optics in 200 years, the Schmidt telescope combines
the best features of the refractor and reflector for photographic purposes. It was invented in
1930 by Bernhard Voldemar Schmidt (1879-1935).
Sidereal Rate
This is the angular speed at which the Earth is rotating. Telescope tracking motors drive
the telescope at this rate. The rate is 15 arc seconds per second or 15 degrees per hour.
T -
Terminator
The boundary line between the light and dark portion of the moon or a planet.
U -
Universe
The totality of astronomical things, events, relations and energies capable of being
described objectively.
V -
Variable Star
A star whose brightness varies over time due to either inherent properties of the star or
something eclipsing or obscuring the brightness of the star.
W -
Waning Moon
The period of the moon's cycle between full and new, when its illuminated portion is
decreasing.
Waxing Moon
The period of the moon's cycle between new and full, when its illuminated portion is
increasing.
Z -
Zenith
Zodiac
The point on the Celestial Sphere directly above the observer.
The zodiac is the portion of the Celestial Sphere that lies within 8 deg on either side of the
Ecliptic. The apparent paths of the Sun, the Moon, and the planets, with the exception of
some portions of the path of Pluto, lie within this band. Twelve divisions, or signs, each 30
deg in width, comprise the zodiac. These signs coincided with the zodiacal constellations
about 2,000 years ago. Because of the Precession of the Earth's axis, the Vernal Equinox
has moved westward by about 30 deg since that time; the signs have moved with it and
thus no longer coincide with the constellations.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX C
LONGITUDES AND
LATITUDES
LONGITUDE
degrees
LATITUDE
min degrees
LONGITUDE
degrees
114
118
116
117
120
121
117
117
122
124
116
117
115
118
117
124
121
121
119
117
117
118
122
115
117
117
120
118
121
118
118
118
118
117
121
121
121
120
117
120
122
118
122
121
122
118
122
114
117
117
122
117
119
116
118
122
120
122
119
124
121
121
122
122
117
121
121
122
117
LATITUDE
min degrees
LONGITUDE
degrees
124
LATITUDE
min degrees
min
min
37.2
12
37.2
7.8
22.8
46.8
40.8
58.2
58.8
46.8
52.2
54
49.2
4.8
40.2
19.8
0
40.8
46.2
52.2
34.8
55.2
39
49.8
34.2
6
min
1.8
46.8
54
19.8
37.8
37.8
48
16.2
19.2
42
ALABAMA
Anniston
Auburn
Blythe
Burbank
Campo
43.2
22.2
28.2
16.8
34.2
51
40.8
37.8
3
13.8
46.8
52.8
40.8
1.8
43.8
16.8
19.2
46.2
43.2
58.2
22.8
19.8
7.2
34.2
7.2
46.8
0
13.2
49.2
9
3
2.4
55.2
16.2
34.2
1.8
2.4
31.2
9
57
3
9
31.8
51
19.2
4.2
16.8
37.2
1.2
13.8
13.2
37.2
1.2
3
7.8
33
34
32
33
37
39
35
33
37
41
34
34
32
34
33
41
36
36
36
33
34
33
37
32
32
34
38
34
37
33
33
33
37
33
39
38
38
37
32
37
37
35
41
36
41
34
38
34
32
34
37
34
34
33
35
37
35
37
34
39
34
35
40
40
33
38
36
37
33
Shelter Cove
Siskiyou
Stockton
Superior Val
Susanville
Thermal
Torrance
Travis AFB
Tahoe
Tustin Mcas
Ukiah
Van Nuys
Vandenberg
Visalia
COLORADO
Air Force A
Akron
Alamosa
Aspen
Brmfield/Jef
Buckley
Colo Sprgs
Cortez
4.2
28.2
15
0.6
57
10.2
19.8
55.8
7.8
49.8
1.2
28.8
57
2.4
40
41
37
35
40
33
33
38
39
33
39
34
35
36
85
85
86
87
85
85
86
86
86
88
88
86
87
86
86
87
51
26.4
45
15
27
43.2
5.4
46.2
22.2
15
4.2
2.4
37.2
59.4
1.2
33
32
33
32
31
31
33
34
32
30
30
32
34
32
31
33
34.8
40.2
34.2
54
19.2
16.8
58.2
39
22.8
40.8
37.8
18
122
121
117
120
116
118
121
120
117
123
118
120
Birmingham
Centreville
Dothan
Fort Rucker
Gadsden
Huntsville
Maxwell AFB
Mobile
Mobile Aeros
Montgomery
Muscle Shoal
Selma
Carlsbad
Castle AFB
Chico
China Lake
Chino
Concord
Crescent Cty
Daggett
Edwards AFB
El Centro
El Monte
El Toro
Eureka
7.8
13.2
12
45
119
19.2
20.4
52.2
13.8
Troy
105
103
105
106
105
104
104
108
107
104
107
106
104
104
105
105
105
108
104
106
103
102
106
103
107
104
107
106
104
105
21
39
40
37
39
39
39
38
37
40
39
37
39
39
38
39
40
40
39
40
38
38
38
39
39
38
38
39
38
37
40
31.2
10.2
27
13.2
54
43.2
49.2
18
30
45
9
39
34.2
40.8
34.2
27
34.8
7.2
25.8
33
3
7.2
15
10.8
30
16.8
31.8
31.8
15
Tuscaloosa
ALASKA
Anchorage
Barrow
Fairbanks
Haines Hrbor
Homer
Juneau
Ketchikan
Kodiak
Nome
Sitka
Sitkinak
Skagway
Valdez
ARIZONA
Davis-M AFB
Deer Valley
Douglas
Falcon Fld
Flagstaff
Fort Huachuc
Gila Bend
Goodyear
GrandCanyon
Kingman
Luke
37.2
Fort Hunter
Fort Ord
Fresno
13.2
52.2
52.2
7.2
149
156
147
135
151
134
131
152
165
135
154
135
146
51
61
71
64
59
59
58
55
57
64
57
56
59
61
13.2
18
46.8
52.2
25.8
3
34.8
4.2
3
25.8
21
1.2
31.8
21
Fullerton
49.2
13.8
37.8
22.2
21
45
30
4.2
52.8
45
George AFB
Hawthorne
Hayward
45
43.2
37.8
31.8
52.2
45
55.2
49.8
46.2
3
Imperial
Craig-Moffat
Denver
Durango
Eagle
Imperial Bch
La Verne
Lake Tahoe
Lancaster
Livermore
Long Beach
Los Alamitos
Los Angeles
Mammoth
March AFB
Marysville
Mather AFB
Mcclellan
Merced
54
43.8
42
Englewood
Fort Carson
Fraser
Ft Col/Lovel
Ft Collins
Grand Jct
Greeley-Wld
Gunnison
La Junta
Lamar
Leadville
Limon
Montrose
Pueblo
Rifle
Salida
49.2
46.8
55.8
37.8
52.8
6
34.2
40.2
16.8
52.2
37.8
25.2
3
43.8
34.8
19.2
13.8
13.2
46.2
42
6
43.8
3
12
49.8
3
28.2
40.2
49.8
7.2
34.8
57
40.2
9
30
7.8
1.2
4.8
110
112
109
111
111
110
113
112
112
113
112
111
111
112
112
109
111
110
110
111
110
115
114
114
52.8
4.8
3.6
43.8
40.2
21
10.2
22.8
9
57
22.8
27
19.8
1.2
25.8
40.8
55.2
0
32
33
31
33
35
31
33
33
35
35
33
36
34
33
34
32
33
34
32
33
35
33
32
32
10.2
40.8
27
28.2
7.8
36
33
25.2
57
16.2
31.8
55.8
13.8
25.8
39
49.2
37.2
16.2
7.2
31.8
37.8
55.8
31.2
3.6
1.8
4.2
52.8
31.2
4.8
Miramar NAS
Modesto
Moffet
Mojave
Montague
Monterey
Mount Shasta
Mount Wilson
Napa
Needles
North Is
Norton AFB
Oakland
Ontario Intl
Oxnard
Palm Springs
Palmdale
Palo Alto
Paso Robles
Pillaro Pt
Point Mugu
Pt Arena
Pt Arguello
Pt Piedras
Red Bluff
Redding
Riverside
Sacramento
Salinas
San Carlos
San
3
19.8
52.2
Page
Payson
Phoenix
Prescott
Safford Awrs
Scottsdale
Show Low
Tucson
Williams AFB
Winslow
Trinidad
Winter Park
CONNECTICUT
0
Bridgeport
Danbury
Groton
73
73
72
72
72
72
72
7.8
28.8
3
41
41
41
41
41
41
41
10.2
22.2
19.8
43.8
13.2
18
Hartford
39
55.8
40.2
43.8
0
37.2
2.4
New Haven
New London
Windsor Loc
DELAWARE
Dover
Wilmington
D.C. WASH
Washington
FLORIDA
Apalachicola
Astor NAS
Avon Park G
Cape
Canaveral
Cecil
Crestview
Cross City
Daytona Bch
Duke Fld
Eglin AFB
Egmont Key
Fort Myers
Ft Lauderdale
Ft Myers
Gainesville
Homestead
Hurlburt Fld
Jacksonville
Key West
Lakeland
40.2
4.8
40.8
18
1.2
6
39
55.8
Yuma
Yuma Mcas
Yuma Prv Gd
ARKANSAS
Blytheville
Camden
El Dorado
Fayetteville
Ft Smith
75
75
28.2
3.6
39
39
7.8
40.2
51
7.2
37.8
49.8
7.2
13.2
7.2
16.8
15
1.8
27
3
3.6
15
89
92
92
94
94
93
93
90
92
91
94
94
90
57
35
33
33
36
35
36
34
35
35
34
36
33
36
58.2
31.2
13.2
0
19.8
16.2
28.8
49.8
13.2
10.2
10.8
27
77
27.6
38
57
2.4
4.8
10.2
22.2
9
0.6
39
22.8
55.8
7.8
0
85
81
81
80
1.8
34.2
33
29
29
28
28
43.8
7.2
4.8
Harrison
33
28.2
Hot Springs
Jonesboro
Little Rock
Pine Bluff
Springdale
Texarkana
Walnut Ridge
CALIFORNIA
Alameda
Alturas
57
81
86
83
81
86
86
82
81
80
81
82
80
86
81
81
81
82
85
81
52.8
31.2
0.6
30
30
29
29
30
30
27
26
26
26
29
25
30
30
24
28
27
30
30
13.2
46.8
37.2
10.8
39
28.8
36
34.8
4.2
31.2
40.2
31.2
25.2
3
37.2
31.2
31.8
46.2
52.2
9
52.2
16.2
22.8
40.8
40.8
45
55.8
7.8
Clemente
San Diego
San
117
122
7.8
22.8
32
37
49.2
37.2
122
120
124
119
121
116
116
116
118
120
19.2
31.8
0.6
3
27
57
37.2
40.8
3.6
4.2
37
41
40
35
39
33
35
34
37
39
46.8
28.8
58.8
25.8
7.8
55.8
16.8
16.2
36
Francisco
San Jose
San Luis Obi
San Mateo
San Miguel
Sandburg
Santa Ana
Santa Barb
Santa Maria
Santa Monica
Santa Rosa
Arcata
121
120
117
120
118
117
119
120
118
122
55.2
39
34.8
2.4
43.8
52.8
49.8
27
37
35
33
34
34
33
34
34
34
38
22.2
13.8
22.8
1.8
39
Bakersfield
Beale AFB
Beaumont
Bicycle Lk
Big Bear
40.8
28.8
25.8
13.8
33
1.8
51
50.4
24
45
40.2
25.8
54
1.2
31.2
Bishop
Blue Canyon
57
16.8
Macdill AFB
Marianna
Mayport NAS
31.2
10.8
25.2
27
49.2
51
Download from Www.Somanuals.com. All Manuals Search And Download.
LONGITUDE
degrees
80
LATITUDE
min degrees
LONGITUDE
degrees
87
LATITUDE
min degrees
LONGITUDE
degrees
90
LATITUDE
min degrees
min
6
49.2
7.8
37.2
25.8
12
13.8
21
58.2
55.2
46.8
24
22.8
58.2
31.2
4.2
min
4.8
min
10.8
7.8
Melbourne
Miami
37.8
16.8
4.8
40.8
19.2
40.8
3.6
19.2
3.6
40.8
15
28
25
26
28
28
30
28
30
27
27
28
27
30
27
28
30
27
26
Glenview
NAS
Kankakee
Macomb
Marion
Marseilles
Mattoon
Moline/Quad
Mount
Vernon
Peoria
Quincy
Rockford
Salem
Scott AFB
Springfield
Sterling
Taylorville
Vandalia
INDIANA
Bakalar
Bloomington
Elkhart
Evansville
Fort Wayne
Gary
Grissom AFB
Indianapolis
Muncie
South Bend
Terre Haute
W Lafayette
IOWA
Burlington
Cedar Rapids
Des Moines
Dubuque
Estherville
Fort Dodge
Lamoni
Mason City
Ottumwa
Sioux City
Spencer
Waterloo Mun
KANSAS
Chanute
Col. J Jabar
Concordia
Dodge City
Elkhart
49.2
42
Grand Isle
High Island
Houma
Intercoastal
Lafayette
Lake Charles
Lk Palourde
Missippi Can
Monroe
Morgan City
New Iberia
New Orleans
S Marsh Isl
Shreveport
Slidel
4.2
2.4
39
7.2
0
13.2
0.6
3
29
28
29
29
30
30
29
28
32
29
30
29
28
32
30
80
81
80
81
85
80
87
82
82
81
82
84
82
80
85
80
94
90
92
92
93
91
89
92
91
91
90
91
93
89
Naples
Nasa Shuttle
Orlando
87
90
89
88
88
90
88
51
39.6
0
40.8
16.8
31.2
51.6
41
40
37
41
39
41
38
4.2
31.2
45
22.2
28.8
27
34.2
43.8
12
Panama City
Patrick AFB
Pensacola
Ruskin
Saint Peters
Sanford
7.2
42
46.8
31.2
42
19.2
3
1.2
52.8
15
58.8
45
89
91
89
88
89
89
89
89
89
40.8
1.2
0.6
57.6
51
40.2
40.2
19.8
10.2
40
39
42
38
38
39
41
39
38
40.2
55.8
12
37.8
33
1.8
Sarasota
Tallahassee
Tampa Intl
Titusville
Tyndall AFB
Vero Beach
West Palm
Beach
33
58.8
18
31.2
21
22.2
31.8
4.8
34.8
25.2
7.2
49.2
51
MAINE
Augusta
Bangor
39
40.8
44.4
31.8
59.4
69
68
68
69
68
69
67
67
70
68
69
70
4.8
44
44
44
43
46
45
46
46
43
46
44
44
19.2
48
27
80
49.2
22.2
55.8
1.2
Bar Harbor
Brunswick
Caribou Mun
Greenville
Houlton
Loring AFB
Portland
Presque Isle
Rockland
Rumford
MARYLAND
Andrews AFB
Baltimore
Fort Meade
Hagerstown
Ocean City
Patuxent
Whiting Fld
GEORGIA
Albany
87
1.2
30
43.2
52.8
52.2
27
86
86
86
87
85
87
86
86
85
86
87
86
3
37.2
0
39
39
41
38
41
41
40
39
40
41
39
40
22.8
7.8
43.2
3
0
37.2
39
43.8
13.8
42
27
25.2
84
82
83
84
81
81
84
84
85
81
81
85
83
83
83
85
83
82
10.8
31.2
19.2
25.2
58.2
22.8
55.8
31.2
0
34.2
9
4.2
39
1.2
31
31
33
33
33
31
32
33
32
31
32
33
32
30
32
34
30
31
31.8
31.8
57
39
22.2
9
31.2
55.2
19.8
52.8
1.2
33
Alma
Athens
46.8
52.8
19.2
3
7.2
52.8
7.8
57
31.8
1.2
25.2
9
16.2
22.8
19.2
1.8
55.8
Atlanta
39
Augusta/Bush
Brunswick
Columbus
Dobbins AFB
Fort Benning
Ft Stewart
Hunter Aaf
La Grange
Macon/Lewis
Moody AFB
Robins AFB
Rome/Russell
Valdosta
Waycross
HAWAII
Barbers Pt
Barking San
Fr Frigate
Hilo
Honolulu Int
Kahului Maui
Kaneohe Mca
Kilauea Pt
Lanai-Lanai
Lihue-Kauai
Maui
40.8
4.2
52.8
76
76
76
77
75
76
76
75
52.2
40.2
46.2
43.2
7.8
2.4
10.2
3
38
39
39
39
38
38
39
38
49.2
10.8
4.8
42
33
16.8
28.2
19.8
0.6
42
91
91
93
90
94
94
93
93
92
96
95
92
7.2
4.2
39
4.2
45
10.8
55.8
19.8
27
22.8
9
40
41
41
42
43
42
40
43
41
42
43
42
46.8
52.8
31.8
24
24
33
37.2
9
6
24
10.2
33
58.2
37.8
21
46.8
15
3.6
Phillips
Salisbury
10.2
16.8
2.4
MASSACHUSETTS
Bedford
71
70
71
70
69
71
70
71
70
70
70
71
70
73
70
72
72
71
16.8
55.2
1.8
3
58.2
3.6
16.8
7.2
37.2
4.2
58.2
10.8
31.2
10.8
55.8
43.2
31.8
52.2
42
42
42
41
41
42
41
42
41
41
41
42
41
42
42
42
42
42
28.2
34.8
22.2
46.8
40.2
34.2
40.2
43.2
24
Beverly
Boston
Cape Cod
Chatham
Fort Devens
Hyannis
Lawrence
Marthas Vine
Nantucket
New Bedford
Norwood
158
160
166
155
157
156
158
159
156
159
156
157
156
156
7.2
1.8
28.2
4.2
55.8
25.8
16.8
40.2
57
21
49.8
0.6
21
22
24
19
21
20
21
22
20
21
20
21
20
20
31.8
3
27
43.2
21
54
45
22.8
48
58.8
58.2
9
25.2
0
2.4
95
97
97
99
101
96
94
96
100
101
99
99
97
94
100
96
97
98
94
98
97
95
95
97
28.8
13.2
39
58.2
52.8
1.2
55.2
46.2
43.2
4.2
16.2
49.8
52.2
52.8
58.2
40.2
16.2
34.8
5.4
37
37
39
37
37
38
39
39
37
39
38
39
38
38
37
39
37
37
38
38
38
39
38
37
40.2
45
33
46.2
0
19.8
22.2
3
55.8
22.2
51
22.8
4.2
49.2
3
9
37.2
18
15
40.8
10.8
39
Otis ANGB
Pittsfield
Molokai
Emporia
Ft Leavnwrth
Ft Riley
Garden City
Goodland
Hays
15.6
9
10.2
12
Upolo Pt Ln
Waimea-
Koha
28.2
7.2
S Weymouth
Westfield
Westover
Worcester
MICHIGAN
Alpena
Ann Arbor
Battle Creek
Benton
IDAHO
16.2
Boise
116
113
114
116
13.2
46.2
13.2
49.2
43
42
44
47
34.2
31.8
31.2
46.2
Burley
Challis
Coeur
Hill City
83
83
85
86
34.2
45
13.8
25.8
45
42
42
42
4.2
13.2
18
Hutchinson
Johnson Cnty
Liberal
Manhatten
Mcconnell Af
Medicine Ldg
Olathe
Russell
Salina
Topeka
Topeka/Forbe
Wichita
KENTUCKY
Bowling Gren
Ft Campbell
Ft Knox
Jackson
Lexington
London
Louisville
Owensboro
Paducah
Pikeville
LOUISIANA
Alexandria
Barksdale
Baton Rouge
Boothville
Cameron Heli
Claiborne R
England AFB
Eugene Is.
Fort Polk
d'Alene
7.8
Elk City
115
115
116
112
117
112
113
116
115
112
113
111
114
114
25.8
10.2
7.8
4.2
1.2
19.2
22.2
0.6
4.8
3.6
45
43
45
43
46
42
42
44
47
42
45
42
43
42
49.2
0
Harbor
Gooding
Chippewa
Coopersville
Copper Harb
Detroit
Escanaba
Flint/Bishop
Grand Rapids
Hancock
Harbor Beach
Houghton
Lake
Iron Mtn
Ironwood
Jackson
Kalamazoo
Lansing
Manistee
Marquette
Menominee
Muskegon
Pellston
84
85
87
83
87
83
85
88
82
84
28.2
57
51
1.2
4.8
45
31.2
3
46
43
47
42
45
42
42
47
43
44
15
Grangeville
Idaho Falls
Lewiston
Malad City
Malta
Mccall
Mullan
Pocatello
Salmon
55.2
31.2
22.8
10.2
18
52.8
28.2
55.2
10.8
39
4.2
51
52.2
48
4.2
57
39
28.2
25.2
43.8
58.2
52.8
10.2
49.8
22.2
49.2
39
37.2
40.2
25.8
31.8
40.8
5.4
34.8
1.8
86
87
85
83
85
84
85
87
88
82
25.8
3
58.2
19.2
0
36
36
37
37
38
37
38
37
37
37
58.2
40.2
54
36
3
4.8
13.8
45
4.2
28.8
Soda Springs
Sun Valley
Twin Falls
ILLINOIS
Alton
30
28.8
88
90
84
85
84
86
87
87
86
84
83
84
84
87
82
85
85
7.2
7.8
28.2
33
3.6
15
57
37.8
15
4.8
25.2
4.8
22.2
2.4
49.8
55.2
34.8
45
46
42
42
42
44
46
45
43
45
42
43
46
46
42
45
44
49.2
31.8
16.2
13.8
46.2
16.2
52.8
7.2
10.2
34.2
40.2
31.8
28.2
21
28.8
90
88
90
88
89
89
89
89
88
87
87
88
88
88
90
3
19.2
9
55.8
3.6
13.2
15
5.4
16.8
39
38
41
38
40
41
37
37
38
40
41
40
41
39
41
40
52.8
46.2
34.2
28.8
9.6
4.2
Aurora
40.2
10.2
46.2
31.2
Bistate Park
Bloomington
Bradford
Cairo
Carbondale
Centralia
Champaign
Chicago
4.2
46.8
30.6
1.8
54
12
55.8
49.8
55.2
55.8
92
93
91
89
93
92
92
91
93
1.8
40.2
9
40.2
1.8
57
33
46.8
1.2
31
32
30
29
29
31
31
28
31
22.8
30
31.8
33
46.8
13.2
19.8
28.2
3
Pontiac
Saginaw
Sault Ste M
Sawyer AFB
Selfridge
Seul Choix
Traverse Cty
Danville
3.6
43.2
52.2
15
DeKalb
Decatur
Du Page
Galesburg
37.2
55.2
43.8
25.8
52
Download from Www.Somanuals.com. All Manuals Search And Download.
LONGITUDE
degrees
83
LATITUDE
min degrees
LONGITUDE
degrees
LATITUDE
min degrees
LONGITUDE
degrees
106
LATITUDE
min degrees
min
27
13.8
min
min
37.2
37.8
4.2
25.2
13.8
10.8
37.8
Wurtsmith
Ypsilanti
2.4
31.8
44
42
NEBRASKA
Ainsworth
Alliance
Beatrice
Broken Bow
Burwell
Chadron
Columbus
Cozad
Falls City
Grand Island
Hastings
Imperial
Kearney
Lincoln Muni
Mccook
Santa Fe
Silver City
Socorro
4.8
10.2
5.4
34.2
16.2
3.6
35
32
34
36
33
35
32
83
99
102
96
99
99
103
97
100
95
98
98
101
99
96
100
101
97
96
100
98
95
95
58.8
4.8
45
39
9
4.8
21
0
34.8
19.2
25.8
23.4
0
42
42
40
41
41
42
41
40
40
40
40
40
40
40
40
42
41
41
41
42
41
41
41
41
41
42
34.8
3
108
106
105
107
103
106
MINNESOTA
Albert Lea
Alexandria
Bemidji Muni
Brainerd-Crw
Detroit Laks
Duluth
93
95
94
94
95
92
91
94
96
93
92
93
94
93
95
93
95
94
92
93
94
96
90
95
95
22.2
22.8
55.8
7.8
52.8
10.8
49.2
25.2
4.2
43
45
47
46
46
46
47
43
46
47
47
48
45
44
44
44
46
46
43
44
45
48
47
48
43
40.8
52.2
30
19.2
25.8
46.8
49.8
27
52.2
4.2
58.2
36
19.8
43.8
51
13.2
3
58.8
22.2
7.8
28.2
7.2
Taos
Truth Or Con
Tucumcari
White Sands
NEW YORK
Albany
Ambrose
Binghamton
Buffalo
24
2.4
49.2
49.8
54
39
18
13.2
22.8
34.2
7.8
13.2
27
49.8
54
36
73
74
75
78
78
76
73
75
73
75
73
76
79
74
74
73
74
78
75
75
73
77
74
73
76
75
76
72
73
4.8
42
40
42
42
42
42
40
44
43
43
40
42
42
44
41
40
41
43
44
42
44
43
44
42
43
43
44
40
41
45
Ely
22.2
58.8
43.8
1.2
45
Fairmont
Fergus Falls
Grand Rapids
Hibbing
Intl Falls
Litchfield
Mankato
13.2
55.8
58.2
10.2
43.8
3
31.2
51
Dansville
Elmira
5.4
22.8
31.2
55.2
49.2
28.2
4.2
19.2
3
3
45
34.8
3
Farmingdale
Fort Drum
Glens Falls
Griffiss AFB
Islip
25.8
43.8
37.2
2.4
0.6
28.2
15
51
4.8
58.8
0.6
57
Mullen
Norfolk
21
Marshall Arpt
Minneapolis
Park Rapids
Pequot Lake
Rochester
Saint Paul
St Cloud
25.8
1.2
40.8
40.8
55.2
5.4
57
3.6
58.8
33
13.8
46.8
28.8
9
55.8
42
46.2
30
6
North Omaha
North Platte
O'neill
Offutt AFB
Omaha
Ord/Sharp
Scottsbluff
Sidney Muni
Valentine
NEVADA
Austin
Battle Mtn
Caliente
Elko
Ely/Yelland
Eureka
Fallon NAS
Hawthorne
Ind Sprng Rn
Las Vegas
Lovelock
Mercury
Nellis AFB
Owyhee
Reno
Tonopah
Wildhorse
Winnemucca
Yucca Flat
Ithaca
Jamestown
Massena
Monticello
New York
Newburgh
Niagara Fall
Ogdensburg
Oneonta
Plattsburgh
Rochester
Saranac Lk
Schenectady
Syracuse
Utica
55.2
55.8
33
18
4.2
98
37.2
52.2
6
Thief River
Tofte
10.8
49.8
21
4.2
103
102
100
34.8
55.8
39
Warroad
52.2
2.4
7.2
40.8
52.2
39
7.2
22.8
51
7.2
9
0
Worthington
MISSISSIPPI
Columbus
AFB
Golden Trian
Greenville
Greenwood
Gulfport
34.8
117
116
114
115
114
115
118
118
115
115
118
116
115
116
119
117
116
117
116
7.8
39
40
37
40
39
39
39
38
36
36
40
36
36
42
39
38
41
40
37
49.8
37.2
37.2
49.8
16.8
30
25.2
33
31.8
4.8
28.2
40.2
1.2
55.8
7.2
22.8
1.2
37.8
43.2
88
27
33
39
52.2
31.2
46.8
51
58.2
4.2
37.8
34.2
10.2
55.2
1.2
88
90
90
89
89
90
88
89
90
88
88
91
89
88
34.8
58.8
4.8
4.2
19.8
4.8
55.2
10.2
28.2
34.2
45
15
32.4
46.2
33
33
33
30
31
32
30
31
31
32
32
31
34
34
27
28.8
30
24
Watertown
Westhampton
White Plains
Hattiesburg
Jackson
28.2
19.2
25.2
40.2
10.8
33
19.8
37.2
23.4
16.2
51
4.2
Keesler AFB
Laurel
Mccomb
Meridian NAS
Meridian/Key
Natchez
NORTH CAROLINA
Asheville
6
82
75
80
76
76
75
76
78
78
79
81
82
77
77
79
75
77
77
79
78
77
79
77
80
33
33
55.8
52.8
3
35
35
35
34
36
35
36
35
35
36
35
35
34
35
35
35
35
34
35
35
35
35
34
36
25.8
16.2
13.2
54
37.2
13.8
34.8
30
4.2
19.8
54
Cape Hattera
Charlotte
Cherry Point
Dare Co Gr
Diamond Sho
Elizabeth
Fayetteville
Fort Bragg
Greensboro
Hickory
Hot Springs
Jacksonville
Kinston
Mackall Aaf
Manteo Arpt
New Bern
New River
Pope AFB
Raleigh-Durh
Rocky Mt
Southern Pin
Wilmington
Winston-
1.8
10.2
46.8
4.8
15
4.8
7.8
Oxford
3
15
Tupelo
10.8
52.8
55.8
57
22.8
49.2
37.2
37.8
3
40.8
3
25.8
1.2
16.2
0
7.8
MISSOURI
Columbia
Cape
92
89
13.2
34.8
38
37
49.2
13.8
4.8
34.8
NEW HAMPSHIRE
Berlin
4.8
Girardeau
Ft Leonard
Jefferson City
Joplin
Kansas City
Kirksville
Monett
71
71
72
72
71
72
71
71
71
70
71
10.8
3
0
16.2
25.8
1.8
25.8
1.8
44
43
42
42
43
43
42
44
42
43
44
34.8
12
48
45
54
92
92
94
94
92
94
95
90
94
93
93
95
90
91
92
93
7.8
10.2
3
43.2
33
21
21.6
28.2
33
43.2
22.8
31.8
22.2
46.2
25.2
33
37
38
37
39
40
37
35
36
38
40
37
40
38
38
37
38
45
36
Concord
Jaffrey
Keene
Laconia
49.2
19.2
1.8
55.2
4.8
10.2
19.2
6
19.8
39.6
46.2
51
54
34.2
37.8
55.8
16.2
46.8
4.8
Lebanon
Manchester
Mt Washingtn
Nashua
Pease AFB
Wolfeboro
NEW JERSEY
Atlantic CtIy
Barnegat Ls
Fairfield
Lakehurst
Mcguire AFB
Millville
Morristown
Newark Intl
Teterboro
Trenton
Muskogee
Poplar Bluff
Richards-Geb
Spickard
42
31.2
49.2
22.8
10.2
52.2
51
46.8
52.8
23.4
55.2
13.8
15
0
Springfield
St Joseph
St Louis
13.8
16.8
45
7.8
13.2
43.8
14.4
16.2
7.8
74
74
74
74
74
75
74
74
74
74
34.2
16.8
16.8
21
3.6
4.2
25.2
10.2
3
39
40
40
40
40
39
40
40
40
40
27
16.8
52.2
1.8
1.2
22.2
48
42
51
16.8
Vichy/Rolla
West Plains
Whiteman
AFB
MONTANA
Billings
Salem
NORTH DAKOTA
Bismarck
Devil's Lake
Dickenson
Fargo
Grand Forks
Jamestown
Lidgerwood
Minot
Roseglen
Williston
OHIO
Athens
Canton
100
98
102
96
97
98
45
5.4
4.8
4.8
10.8
40.8
9
16.8
49.8
37.8
46
48
46
46
47
46
46
48
47
48
46.2
7.2
46.8
54
108
111
105
112
112
112
113
106
104
111
109
109
112
106
114
109
110
111
105
114
112
104
111
31.8
9
40.2
3
22.2
33
9
37.2
4.8
22.2
49.8
46.2
0
55.8
16.2
27
25.8
10.8
52.2
4.8
45
45
45
45
48
45
46
48
47
47
46
48
46
47
48
47
45
47
46
46
44
47
44
48
Bozeman
Broadus
Butte
46.8
40.2
57
36
15
40.2
13.2
7.8
28.8
25.8
33
36
19.8
18
3
42
30
25.8
55.2
34.2
43.2
39
57
55.2
6
49.2
NEW MEXICO
Albuquerque
Cannon
Carlsbad
Clayton Arpt
Corona
97
Cut Bank
Dillon
106
103
104
103
105
107
108
108
107
103
106
3.6
35
34
32
36
34
32
36
35
35
32
32
3
101
101
103
16.2
45
19.2
16.2
9
40.8
4.2
13.8
46.8
5.4
22.8
19.8
27
6
15
Drummond
Glasgow
10.8
Glendive
Great Falls
Harlowton
Havre
82
81
84
81
82
84
83
82
82
83
81
80
81
13.8
25.8
40.2
40.8
52.8
1.2
40.2
31.2
55.8
4.8
39
40
39
41
40
39
41
40
39
41
41
41
39
12.6
55.2
3
31.2
0
Deming
Farmington
Gallup/Clark
Grants
Hobbs
Holloman
AFB
Las Cruces
Las Vegas
Los Alamos
Moriarity
Northrup Str
Raton
45
Cincinnati
Cleveland
Columbus
Dayton
31.2
10.2
40.8
51
Helena
Jordan
1.2
0.6
54
Kalispell
Findlay
1.2
49.2
49.2
36
37.8
16.2
57
Lewiston
Livingston
Malmstrom
Miles City
Missoula
Monida
Mansfield
Rickenbacker
Toledo
Willoughby
Youngstown
Zanesville
106
105
106
106
106
104
104
46.2
9
16.8
3
2.4
3
31.8
32
35
35
34
32
36
33
18
39
52.8
58.8
54
44.4
18
2.4
40.2
5.4
19.2
10.8
0.6
Sidney
W Yellowston
Roswell
53
Download from Www.Somanuals.com. All Manuals Search And Download.
LONGITUDE
degrees
LATITUDE
min degrees
LONGITUDE
degrees
LATITUDE
min degrees
LONGITUDE
LATITUDE
min degrees
min
min
40.8
58.2
55.2
degrees
100
98
min
22.2
31.8
10.2
1.8
13.2
9
22.2
51
OKLAHOMA
Altus AFB
Ardmore
Bartlesville
Clinton
Enid
Fort Sill
Gage
Hobart
Lawton
Mcalester
Norman
Oklahoma
Page
Ponca City
Stillwater
Tinker AFB
Tulsa
Vance AFB
OREGON
Astoria
Aurora
Baker
Brookings
Burns Arpt
Cape Blanco
Cascade
Corvallis
Eugene
Hillsboro
Klamath Fall
La Grande
Lake View
Meacham
Medford
Newport
North Bend
Ontario
Pendleton
Portland
Redmond
Roseburg
Salem
Sexton
The Dalles
Troutdale
Myrtle Beach
Shaw AFB
Spartanburg
78
80
81
55.8
28.2
57.6
33
33
34
San Angelo
San Antonio
Sanderson
South Brazos
Stephenville
Temple
Tyler/Pounds
Victoria
Wichita Flls
Wink
3
31
29
30
28
32
31
32
28
33
31
99
97
96
99
97
98
99
99
98
95
97
97
94
97
97
97
95
97
16.2
1.2
0
1.2
4.8
2.4
46.2
3
25.2
46.8
28.2
3.6
37.2
0.6
34
34
36
35
36
34
36
35
34
34
35
35
34
36
36
35
36
36
40.2
18
45
21
22.8
39
28.2
25.2
52.2
10.8
25.2
2.4
55.2
3
1.2
102
95
98
97
95
96
98
103
SOUTH DAKOTA
Aberdeen
Brookings
Chamberlain
Custer
98
96
99
103
103
98
25.8
4.8
19.2
3.6
45
44
43
43
44
44
45
43
45
44
44
44
45
43
44
42
27
18
48
46.2
9
22.8
55.8
46.2
31.8
3
22.8
3
9.6
34.8
55.2
55.2
18
0
Ellsworth
Huron
Lemmon
Mitchell
Mobridge
Philip
Pierre
Rapid City
Redig
Sioux Falls
Watertown
Yankton
0.6
58.8
46.8
34.2
52.8
13.8
24
40.8
43.8
9.6
25.2
12
13.2
10.2
1.8
25.8
3.6
16.8
4.2
19.2
43.8
9
102
98
UTAH
Blanding
109
110
113
112
113
110
110
111
111
113
109
112
110
111
110
113
111
112
109
114
46.8
4.2
0.6
34.8
4.2
9
43.2
58.2
51
1.8
45
1.2
45
43.2
37.8
3.6
58.2
1.2
31.2
3
38
37
37
39
41
39
38
41
41
38
38
41
39
40
40
37
40
40
40
41
1.8
30
42
19.8
3
0
22.2
7.2
46.8
43.2
46.2
10.8
37.2
13.2
30
100
101
100
103
103
96
Bullfrog Mar
Cedar City
Delta
Eagle Range
Green River
Hanksville
Hill AFB
Logan
Milford
Moab
Ogden
Price/Carbon
Provo
Roosevelt
Saint George
Salt Lake Ct
Tooele
5.4
22.8
5.4
55.2
19.8
97
97
22.8
123
122
117
124
118
124
121
123
123
122
121
118
120
118
122
124
124
117
118
122
121
123
123
123
121
122
52.8
45
49.2
28.2
57
46
45
44
42
43
43
45
44
44
45
42
45
42
45
42
44
43
44
45
45
44
43
44
42
45
45
9
15
49.8
4.8
36
22.8
40.8
30
7.2
31.8
9
16.8
10.8
30
22.2
37.8
25.2
1.2
TENNESSEE
Bristol
82
85
87
85
89
88
83
90
85
86
86
2.4
1.2
25.2
4.8
2.4
55.2
58.8
0
36
35
36
35
36
35
35
35
35
36
36
28.8
1.8
37.2
57
1.2
36
49.2
3
9
Chattanooga
Clarksville
Crossville
Dyersburg
Jackson
Knoxville
Memphis Intl
Monteagle
Nashville
Smyrna
TEXAS
Abilene
Alice
Amarillo
Austin
Bergstrom Af
Big Sky
Big Spring
Brownsville
Brownwood
Carswell AFB
Chase NAS
Childress
College Stn
Corpus Chrst
Cotulla
Dalhart
Dallas/FW
Del Rio
Dyess AFB
El Paso
Ellington Af
Fort Worth
Ft Hood Aaf
Galveston
Gray AFB
Greenville
Guadalupe
Harlingen
Hondo
Houston
Junction
Kelly AFB
Kerrville
Killeen
57
52.8
16.8
13.2
57
43.8
0
4.8
46.8
10.2
27
30.6
40.8
3
Vernal
7.2
0
Wendover
VERMONT
Burlington
Montpelier
Newport
13.2
21
73
72
72
73
72
72
9
44
44
45
43
44
42
28.2
12
33
31.8
25.2
52.8
2.4
52.2
3
15
1.2
51
3.6
9
22.2
0
22.2
9
2.4
99
98
101
97
40.8
1.8
4.2
32
27
35
30
30
32
32
25
31
32
28
34
30
27
28
36
32
29
32
31
29
32
31
29
31
33
31
26
29
29
30
29
29
31
27
27
29
32
33
31
30
26
31
32
28
33
34
30
33
28
25.2
43.8
13.8
18
12
23.4
18
34.2
19.8
57
1.2
52.8
Rutland
4.2
St Johnsbury
Wilmington
VIRGINIA
Charlottes
Chesapeake
Danville
Fort Belvoir
Fort Eustis
Hot Springs
Langley AFB
Lynchburg
Newport
97
40.8
28.8
27
25.8
57.6
25.8
40.2
16.8
22.2
3
13.2
33
1.8
55.2
51
2.4
40.8
36
101
101
97
98
97
97
100
96
97
99
102
97
100
99
106
95
97
97
94
97
96
104
97
99
95
99
98
99
97
97
99
100
94
101
94
104
98
102
98
96
95
101
94
78
76
79
77
76
79
76
79
76
27
1.2
38
37
36
38
37
37
37
37
37
7.8
30
34.2
43.2
7.8
57
4.8
19.8
7.8
16.2
13.8
55.2
37.2
37.2
33
54
47.4
46.8
22.2
25.8
34.8
46.2
27
19.8
10.8
37.2
49.2
22.2
1.2
PENNSYLVANIA
Allentown
Altoona
75
78
80
79
78
78
80
79
76
78
76
79
76
76
75
75
78
79
75
77
77
75
76
75
25.8
19.2
19.8
5.4
37.8
5.4
10.8
52.2
51
49.8
1.8
40
40
40
40
41
41
42
41
40
40
40
40
40
40
40
39
41
40
40
39
40
41
41
40
39
18
45
16.2
48
10.8
4.8
22.8
13.2
19.2
7.8
16.8
12
25.8
4.8
52.8
28.2
21
22.8
43.8
51
19.8
15
12
3
1.2
54
News
Beaver Falls
Blairsville
Bradford
Dubois
Erie
Norfolk NAS
Norfolk Rgnl
Oceana NAS
Quantico Mca
Richmond
Roanoke
Muni
76
76
76
77
77
79
16.8
1.2
1.8
1.8
19.8
58.2
36
36
36
38
37
37
55.8
54
49.2
30
30
19.2
22.2
25.8
48
37.2
49.2
9
16.2
4.2
4.2
49.8
13.8
21
58.2
30
22.8
58.8
4.8
10.2
21
43.2
52.2
49.8
4.2
Franklin
Harrisburg
Johnstown
Lancaster
Latrobe
Middletown
Muir
Nth Philadel
Philadelphia
Philipsburg
Pittsburgh
Reading
Staunton
Volens
78
78
75
51
58.8
28.8
38
36
37
16.2
57
51
2.4
Wallops Sta
WASHINGTON
Bellingham
Bremerton
Burlington
Colville
46.2
34.2
1.2
15
7.8
55.8
58.2
25.8
49.8
43.8
55.2
9
4.8
40.2
10.2
21
46.2
34.8
4.8
40.8
49.2
28.2
46.8
43.2
49.2
45
122
122
122
118
119
122
117
122
119
123
122
119
122
122
119
119
123
117
124
122
122
123
117
122
122
31.8
46.2
19.8
28.2
31.2
16.8
39
34.8
3.6
58.2
28.8
19.2
48
47
48
48
47
47
47
47
46
46
47
47
48
46
48
46
48
46
47
47
47
47
47
47
46
48
28.8
30
52.8
19.2
55.2
37.2
4.8
34.2
58.2
9
12
15
58.2
25.2
16.2
7.2
Ephrata
Everet/Paine
Fairchild
Fort Lewis
Hanford
Hoquiam
Mcchord AFB
Moses Lake
Oak Harbor
Olympia
Omak
Pasco
Port Angeles
Pullman
Quillayute
Renton
Seattle
Shelton
Spokane
Tacoma
Toledo
Site R
State Colleg
Wilkes-Barre
Williamsport
Willow Grove
RHODE ISLAND
Block Island
Nth Kingston
Providence
SOUTH CAROLINA
Anderson
Beaufort
Kingsville
Laredo Intl
Laughlin AFB
Longview
Lubbock
Lufkin
Marfa
Mcallen
Midland
30
31.8
22.2
22.8
39
13.8
22.2
10.8
57
46.8
43.2
37.8
10.2
34.8
36
71
71
71
34.8
25.2
25.8
41
41
41
10.2
36
43.8
40.8
1.2
5.4
31.8
7.2
3
7.2
33
13.2
1.8
9
31.8
34.8
4.8
13.8
10.8
4.2
15
27
42.6
1.2
3
82
80
80
81
79
82
80
43.2
43.2
1.8
7.2
43.2
21
34
32
32
33
34
34
33
30
28.8
54
57
10.8
51
Mineral Wlls
Palacios
45
57
30
27
Charleston
Columbia
Florence
Greenville
Mcentire
Paris/Cox
Plainview
Port Arthur
Reese AFB
Rockport
102
97
15
4.8
55.2
1.8
4.8
37.8
16.2
28.8
54
Download from Www.Somanuals.com. All Manuals Search And Download.
LONGITUDE
degrees
118
LATITUDE
min degrees
LONGITUDE
degrees
LATITUDE
min degrees
LONGITUDE
degrees
LATITUDE
min degrees
min
6
24
21
34.2
min
min
Walla Walla
Wenatchee
Whidbey Is
Yakima
16.8
1.2
39
46
47
48
46
WISCONSIN
Appleton
WYOMING
Big Piney
Casper
Cheyenne
Cody
Douglas
Evanston
Gillette
Jackson
Lander
Laramie
Moorcroft
Rawlins
Riverton
Rock Springs
Sheridan
Worland
Yellowstone
120
122
120
88
91
88
89
91
90
89
87
87
89
88
88
89
91
90
89
31.2
28.8
7.8
44
44
44
42
43
43
43
44
42
44
44
44
45
45
43
44
15
110
106
104
109
105
111
105
110
108
105
104
107
108
109
106
107
110
0.6
28.2
49.2
1.2
42
42
41
44
42
41
44
43
42
41
44
41
43
41
44
43
44
34.2
55.2
9
31.2
45
19.8
21
36
49.2
19.2
21
48
3
Eau Claire
Green Bay
Janesville
La Crosse
Lone Rock
Madison
Manitowac
Milwaukee
Mosinee
Neenah
Oshkosh
Rhinelander
Rice Lake
Volk Fld
52.2
28.8
37.2
52.2
12
7.8
7.8
57
46.8
13.2
0
37.8
28.8
55.8
55.2
31.8
WEST VIRGINIA
Beckley
1.8
15
81
81
81
80
79
82
80
77
79
81
80
80
7.2
13.2
3.6
13.8
51
33
2.4
58.8
55.2
25.8
39
37
37
38
39
38
38
37
39
39
39
40
37
46.8
18
22.8
0
Bluefield
10.8
19.8
40.2
5.4
Charleston
Clarksburg
Elkins
Huntington
Lewisburg
Martinsburg
Morgantown
Parkersburg
Wheeling
22.2
16.8
52.8
22.2
52.2
24
39
21
10.8
27.6
31.8
43.8
43.8
40.8
48.6
1.2
40.2
31.8
34.2
27
27
4.2
43.2
16.2
37.2
36
58.2
58.2
25.2
46.2
58.2
33
Wh Sulphur
1.2
Wausau
CANADA
CITY
Calgary
Churchill
PROVINCE
Alberta
Newfoundland
Northwest Terr.
Alberta
New Brunswick
Northwest Terr
Newfoundland
Nova Scotia
BC
Ontario
Labrador
Quebec
Yukon
Yukon
LONGITUDE
LATITUDE
CITY
Glasgow
Guatemala City Guatemala
COUNTRY
Scotland
LONGITUDE
LATITUDE
114
7
51
58
67
53
45
67
53
44
55
49
52
45
60
59
45
56
46
46
50
52
47
43
49
48
60
49
14
45
49
34
57
29
15
39
15
47
56
32
34
12
18
15
14
50
30
10
34
39
16
26
43
53
4
15 w
31 w
56 w
2 e
38 e
23 w
0 e
19 e
7 w
20 e
48 e
4 e
55
14
2
50 n
37 n
10 s
33 n
38 n
8 n
10 n
52 s
10 s
30 n
16 s
12 s
59 n
27 s
45 n
0 s
25 n
32 n
45 n
26 n
30 n
35 n
20 n
12 n
29 n
47 s
26 n
27 n
53 s
45 n
8 n
94
0
90
79
10
23
82
25
147
70
104
106
28
76
68
1
Coppermine
Edmonton
Frederickton
Ft Mcpherson
Goose Bay
Halifax
Hazelton
Kenora
Labrador City
Montreal
Mt. Logan
Nakina
Ottawa
Peace River
Pr. Edward Isl
Quebec
115
113
66
134
60
63
127
94
21
25
40
50
20
34
38
29
52
39
24
48
45
18
9
Guayaquil
Hamburg
Hammerfest
Havana
Helsinki
Hobart
Ecuador
Germany
Norway
Cuba
Finland
Tasmania
Chile
53
70
23
60
42
20
52
6
Iquique
Irkutsk
Russia
66
73
Jakarta
Indonesia
South Africa
Jamaica
Bolivia
Johannesburg
Kingston
La Paz
26
17
16
53
12
53
51
45
40
53
14
43
23
21
37
19
45
34
55
48
32
35
1
140
132
75
117
63
49 w
22 w
30 w
2 w
Ontario
Alberta
Leeds
Lima
England
Peru
77
3
Nova Scotia
Quebec
Saskatchewan
Saskatchewan
Newfoundland
Ontario
BC
BC
Yukon
Manitoba
Liverpool
London
Lyons
England
England
France
Spain
0 w
71
15
38
32
43
23
7
20
3
9
0
5 w
Regina
104
101
52
4
3
2
120
5
50 e
42 w
15 w
57 e
20 e
25 w
45 e
58 e
7 w
10 e
10 w
36 e
35 e
57 e
56 e
55 e
53 e
15 e
37 w
48 e
30 e
42 e
32 w
15 w
20 e
25 e
52 e
5 w
Saskatoon
St. Johns
Toronto
Vancouver
Victoria
Madrid
Manchester
Manila
Marseilles
Mazatlán
Mecca
Melbourne
Mexico City
Milan
England
Phillipines
France
Mexico
Saudi Arabia
Australia
Mexico
Italy
79
123
123
135
97
106
39
144
99
9
56
37
11
129
136
36
118
14
1
30
135
10
79
55
2
116
115
4
Whitehorse
Winnipeg
INTERNATIONAL
Montevideo
Moscow
Munich
Nagasaki
Nagoya
Nairobi
Uruguay
Russia
Germany
Japan
Japan
Kenya
Aberdeen
Scotland
2
9 w
57
9 n
Adelaide
Amsterdam
Ankara
Asunción
Athens
Auckland
Bangkok
Barcelona
Belém
Belfast
Belgrade
Berlin
Birmingham
Bombay
Bordeaux
Bremen
Brisbane
Bristol
Australia
Holland
Turkey
Paraguay
Greece
New Zealand
Thailand
Spain
138
4
36 e
53 e
55 e
40 w
43 e
45 e
30 e
9 e
34
52
39
25
37
36
13
41
1
55 s
22 n
55 n
15 s
58 n
52 s
45 n
23 n
28 s
37 n
52 n
30 n
25 n
0 n
48 n
7 n
25 s
3 n
32
57
23
174
100
2
Nanjing
Naples
China
Italy
32
40
54
46
34
59
8
50 n
58 n
27 n
32 n
57 n
58 n
45 n
48 n
55 n
57 s
25 n
57 s
54 n
56 s
28 s
56 n
31 s
10 n
40 n
17 n
0 s
Newcastle
Odessa
Osaka
England
Ukraine
Japan
Brazil
48
5
20
13
1
72
0
8
29 w
56 w
32 e
25 e
55 w
48 e
31 w
49 e
8 e
Northern Ireland
Yugoslavia
Germany
England
India
54
44
52
52
19
44
53
27
51
50
44
47
34
30
23
33
10
28
29
55
31
12
53
29
55
50
6
Oslo
Norway
Panama
Surinam
France
China
Panama City
Paramaribo
Paris
5
48
39
31
50
22
41
12
33
59
23
31
42
59
34
18
35
35
32
45
19
48
52
41
47
Beijing
France
50 n
5 n
Perth
Plymouth
Australia
England
Germany
Australia
England
Belgium
Romania
Hungary
Argentina
Egypt
153
2
4
29 s
28 n
52 n
25 n
30 n
35 s
2 n
Rio de Janeiro Brazil
43
12
38
70
30
46
121
23
18
151
47
51
139
13
12
96
16
21
174
8
12 w
27 e
27 w
45 w
18 e
31 w
28 e
20 e
3 e
35 w
22 e
7 e
Rome
Italy
Brussels
Bucharest
Budapest
Buenos Aires
Cairo
Salvador
Santiago
St. Petersburg
Sao Paulo
Shanghai
Sofia
Stockholm
Sydney
Tananarive
Teheran
Tokyo
Brazil
Chile
Russia
Brazil
China
Bulgaria
Sweden
Australia
Madagascar
Iran
26
19
58
31
113
18
67
106
106
12
64
130
6
5 e
22 w
21 e
15 e
22 e
2 w
Canton
China
7 n
Cape Town
Caracas
Chihuahua
Chongqing
Copenhagen
Córdoba
Darwin
Dublin
Durban
Edinburgh
Frankfurt
Georgetown
South Africa
Venezuela
Mexico
55 s
28 n
37 n
46 n
40 n
28 s
28 s
20 n
53 s
55 n
7 n
0 e
5 w
33 e
45 e
45 e
12 e
20 e
10 w
20 e
0 e
50 s
45 n
40 n
57 n
26 n
10 n
14 n
14 n
17 s
21 n
China
34 e
34 e
10 w
51 e
15 w
53 e
10 w
41 e
15 w
Denmark
Argentina
Australia
Ireland
South Africa
Scotland
Germany
Guyana
Japan
Tripoli
Libya
Venice
Italy
Veracruz
Vienna
Warsaw
Wellington
Zürich
Mexico
Austria
Poland
New Zealand
Switzerland
30
3
8
47 e
31 e
58
45 n
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix D - RS-232 Connection
You can control your NexStar telescope with a computer via the RS-232 port on the computerized hand
control and using an optional RS-232 cable (#93920). Once connected, the NexStar can be controlled using
popular astronomy software programs.
Communication Protocol:
NexStar-i communicates at 9600 bits/sec, No parity and a stop bit. All angles are communicated with 16 bit
angle and communicated using ASCII hexadecimal.
Description
PC Command ASCII
Hand Control Response
Notes
Echo
Goto Azm-Alt
Kx
X#
#
Useful to check communication
10 characters sent. B=Command,
12AB=Azm, comma, 4000=Alt. If
command conflicts with slew limits,
there will be no action.
B12AB, 4000
Goto Ra-Dec
Get Azm-Alt
R34AB, 12CE
Z
#
Scope must be aligned. If
command conflicts with slew limits,
there will be no action.
12AB, 4000#
10 characters returned,
12AB=Azm, comma, 4000=Alt, #
Get RA-Dec
Cancel Goto
Is Goto in Progress
E
M
L
34AB, 12CE#
#
0# or 1#
Scope must be aligned
0=No, 1=Yes; "0" is ASCII
character zero
Is Alignment Complete
Commands below available
on version 1.6 or later
HC version
J
0# or 1#
0=No, 1=Yes
V
Tx
1 6 #
#
Version 1.6
Alt-Az tracking requires alignment
Stop/Start Tracking
x = 0 (Tracking off)
x = 1 (Alt-Az on)
x = 2 (EQ-N)
x = 3 (EQ-S)
r34AB0500,12CE0500
e
32-bit goto RA-Dec
32-bit get RA-Dec
#
34AB0500,12CE0500#
The last two characters will always
be zero.
32-bit goto Azm-Alt
32-bit get Azm-Alt
b34AB0500,12CE0500
z
#
34AB0500,12CE0500#
The last two characters will always
be zero.
The cable required to interface to the telescope
has an RS-232 male plug at one end and a 4-4
telephone jack at the other end. The wiring is
as follows:
56
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX E – MAPS OF TIME ZONES
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
CELESTRON TWO YEAR WARRANTY
A. Celestron warrants this telescope to be free from defects in materials and workmanship for two years. Celestron
will repair or replace such product or part thereof which, upon inspection by Celestron, is found to be defective in
materials or workmanship. As a condition to the obligation of Celestron to repair or replace such product, the product
must be returned to Celestron together with proof-of-purchase satisfactory to Celestron.
B. The Proper Return Authorization Number must be obtained from Celestron in advance of return. Call Celestron at
(310) 328-9560 to receive the number to be displayed on the outside of your shipping container.
All returns must be accompanied by a written statement setting forth the name, address, and daytime telephone
number of the owner, together with a brief description of any claimed defects. Parts or product for which
replacement is made shall become the property of Celestron.
The customer shall be responsible for all costs of transportation and insurance, both to and from the factory
of Celestron, and shall be required to prepay such costs.
Celestron shall use reasonable efforts to repair or replace any telescope covered by this warranty within thirty days
of receipt. In the event repair or replacement shall require more than thirty days, Celestron shall notify the customer
accordingly. Celestron reserves the right to replace any product which has been discontinued from its product line
with a new product of comparable value and function.
This warranty shall be void and of no force of effect in the event a covered product has been modified in
design or function, or subjected to abuse, misuse, mishandling or unauthorized repair. Further, product
malfunction or deterioration due to normal wear is not covered by this warranty.
CELESTRON DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WHETHER OF MERCHANTABILITY OF
FITNESS FOR A PARTICULAR USE, EXCEPT AS EXPRESSLY SET FORTH HEREIN.
THE SOLE OBLIGATION OF CELESTRON UNDER THIS LIMITED WARRANTY SHALL BE TO REPAIR OR
REPLACE THE COVERED PRODUCT, IN ACCORDANCE WITH THE TERMS SET FORTH HEREIN.
CELESTRON EXPRESSLY DISCLAIMS ANY LOST PROFITS, GENERAL, SPECIAL, INDIRECT OR
CONSEQUENTIAL DAMAGES WHICH MAY RESULT FROM BREACH OF ANY WARRANTY, OR ARISING OUT
OF THE USE OR INABILITY TO USE ANY CELESTRON PRODUCT. ANY WARRANTIES WHICH ARE IMPLIED
AND WHICH CANNOT BE DISCLAIMED SHALL BE LIMITED IN DURATION TO A TERM OF TWO YEARS FROM
THE DATE OF ORIGINAL RETAIL PURCHASE.
Some states do not allow the exclusion or limitation of incidental or consequential damages or limitation on how long
an implied warranty lasts, so the above limitations and exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Celestron reserves the right to modify or discontinue, without prior notice to you, any model or style telescope.
If warranty problems arise, or if you need assistance in using your telescope contact:
Celestron
Customer Service Department
2835 Columbia Street
Torrance, CA 90503
Tel. (310) 328-9560
Fax. (310) 212-5835
Monday-Friday 8AM-4PM PST
This warranty supersedes all other product warranties.
NOTE: This warranty is valid to U.S.A. and Canadian customers who have purchased this product from an
Authorized Celestron Dealer in the U.S.A. or Canada. Warranty outside the U.S.A. and Canada is valid only to
customers who purchased from a Celestron Distributor or Authorized Celestron Dealer in the specific country
and please contact them for any warranty service.
Download from Www.Somanuals.com. All Manuals Search And Download.
Celestron
2835 Columbia Street
Torrance, CA 90503
Tel. (310) 328-9560
Fax. (310) 212-5835
Copyright 2004 Celestron
All rights reserved.
(Products or instructions may change
without notice or obligation.)
Item # 11022-XLT-SE-INST
11-04
$10.00
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Beyonwiz TV Converter Box AP E1 User Manual
Blanco Indoor Furnishings 157 067 User Manual
Briggs Stratton Pressure Washer 1900PSI User Manual
Cabletron Systems Switch SmartCell 6A000 User Manual
Califone Satellite Radio M319 User Manual
Cambridge Audio CD Player CD5 User Manual
Campbell Hausfeld Nail Gun CHN70200 User Manual
Campbell Hausfeld PDAs Smartphones WG2040 User Manual
Carrier Furnace 58DH User Manual
Chauvet Power Supply CH 202B User Manual