ES
USER’S GUIDE
Please keep all information for future reference.
Safety Precautions
Before trying to use the Digital Piano, be sure to read
the separate “Safety Precautions”.
GUÍA DEL USUARIO
Guarde toda la información para futuras consultas.
Precauciones de seguridad
Antes de intentar usar el piano digital, asegúrese de
leer las “Precauciones de seguridad” separadas.
CDP220-ES-1B
Download from Www.Somanuals.com. All Manuals Search And Download.
Important!
Please note the following important information before using this product.
• Before using the AD-A12150LW Adaptor to power the product, be sure to check the AC Adaptor for any damage first. Carefully
check the power cord for breakage, cuts, exposed wire and other serious damage. Never let children use an AC adaptor that is
seriously damaged.
• The product is not intended for children under 3 years.
• Use only CASIO AD-A12150LW adaptor.
• The AC adaptor is not a toy.
• Be sure to disconnect the AC adaptor before cleaning the product.
This mark applies in EU countries only.
Manufacturer:
CASIO COMPUTER CO.,LTD.
6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan
Responsible within the European Union:
CASIO EUROPE GmbH
Casio-Platz 1, 22848 Norderstedt, Germany
● Any reproduction of the contents of this manual, either in part or its entirety, is prohibited. Except for your own, personal
use, any other use of the contents of this manual without the consent of CASIO is prohibited under copyright laws.
● IN NO EVENT SHALL CASIO BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION,
DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, LOSS OF INFORMATION) ARISING OUT OF THE
USE OF OR INABILITY TO USE THIS MANUAL OR PRODUCT, EVEN IF CASIO HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
● The contents of this manual are subject to change without notice.
● The actual appearance of the product may be different from that shown in the illustrations in this User’s Guide.
● Company and product names used in this manual may be registered trademarks of others.
E-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
General Guide............................. E-4
Playing Built-in Songs..............E-26
Playing the Demo Songs ................................. E-26
Playing Back a Particular Song........................ E-26
Increasing the Selection of Songs ................... E-29
Using the 10-key Pad (br).................................E-7
FUNCTION Button (ck) Functions ....................E-7
Returning the Digital Piano to Its
Factory Default Settings.....................................E-8
Using Built-in Songs to
Master Keyboard Play ..............E-30
Getting Ready to Play ................ E-9
Preparing the Music Stand.................................E-9
Connecting a Pedal Unit.....................................E-9
Power Supply .....................................................E-9
Phrases............................................................ E-30
Step Up Lesson Flow....................................... E-30
Selecting the Song, Phrase, and
Part You Want to Practice................................ E-31
Playing the Digital Piano.......... E-10
Lessons 1, 2, and 3.......................................... E-32
Lesson Settings ............................................... E-33
Using Auto Step Up Lesson............................. E-35
Turning on Power and Playing .........................E-10
Using Headphones...........................................E-10
Changing Keyboard Response to
Touch Pressure (Touch Response)..................E-11
Music Challenge
Keyboard Game ........................E-36
Adjusting Display Contrast ...............................E-11
Using the Metronome.......................................E-12
Using Auto Accompaniment....E-37
Controlling the
Keyboard Sounds..................... E-13
Playing the Rhythm Part only........................... E-37
Playing All Parts............................................... E-38
Using Auto Accompaniment Effectively ........... E-40
Using One-Touch Preset ................................. E-41
Using Auto Harmonize..................................... E-42
Select from a variety of musical
instrument sounds ............................................E-13
Layering Two Tones.........................................E-14
Splitting the Keyboard between
Two Different Tones.........................................E-14
Looking Up the Notes of Chords
(Chord Book).................................................... E-43
Using Reverb....................................................E-15
Using Chorus....................................................E-15
Using a Pedal...................................................E-16
Editing Auto Accompaniment
Patterns......................................E-44
Changing the Pitch
(Transpose, Tuning, Octave Shift)....................E-16
Using the Pitch Bend Wheel to
Shift the Pitch of Notes.....................................E-17
Saving Keyboard Setups to
Registration Memory ................E-47
To save a setup to registration memory........... E-48
Sampling Sounds and Playing
Them on the Digital Piano ....... E-18
Connection and Preparation.............................E-18
To recall a setup from registration memory ..... E-48
Sampling and Playing a Melody Sound
(Melody Sampling) ...........................................E-19
Incorporating a Sampled Sound into a
Drum Set (Drum Sampling)..............................E-21
Other Sampling Functions................................E-24
E-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Recording Your
Connecting External
Keyboard Play........................... E-49
Devices ......................................E-64
Recording and Playing Back
Connecting a Computer................................... E-64
Keyboard Play..................................................E-49
MIDI Settings ................................................... E-65
Using Tracks to Record and Mix Parts.............E-50
Storing and Loading Digital Piano
Recording Two or More Songs, and
Memory Data ................................................... E-67
Selecting One for Playback..............................E-52
Connecting to Audio Equipment ...................... E-68
Recording while Playing Along with a
Built-in Song.....................................................E-52
Reference...................................E-69
Saving Recorded Data on an
Troubleshooting ............................................... E-69
Specifications................................................... E-71
Operating Precautions ..................................... E-72
Error Messages................................................ E-73
Song List.......................................................... E-74
Fingering Guide ............................................... E-75
External Device ................................................E-53
Other Useful Digital Piano
Functions .................................. E-54
Changing the Scale of the Keyboard................E-54
Using Music Preset ..........................................E-55
Using the Arpeggiator.......................................E-56
Deleting User Song Data..................................E-57
Deleting All Data in Digital Piano Memory........E-57
MIDI Implementation Chart
Using a Memory Card............... E-58
Memory Card and Card Slot Precautions.........E-58
Inserting and Removing a Memory Card..........E-59
Formatting a Memory Card...............................E-59
Saving Digital Piano Data to a
Memory Card....................................................E-60
Loading Data from a Memory Card into
Digital Piano Memory .......................................E-61
Deleting Data from a Memory Card..................E-62
Playing Back Data from a Memory Card ..........E-63
Memory Card Error Messages .........................E-63
Included Accessories
Separately Available Accessories
• You can get information about accessories that
are separately for this product from the CASIO
catalog available from your retailer, and from the
CASIO website at the following URL.
● Music Stand
● Pedal
● Song Book
● Leaflets
• Safety Precautions
• Appendix
• Other (Warranty, etc.)
Items included as accessories are subject to change without notice.
E-3
Download from Www.Somanuals.com. All Manuals Search And Download.
General Guide
• In this manual, the term “Digital Piano” refers to the CDP-220R.
• In this manual, buttons and other controllers are identified using the numbers shown below.
1
2 3 4 5 6 7 8
9
bk bl bm
bn bo
bp bq
br
bs bt ck
cl cm cn co cp cq
cr cs ct
dk
dl
dk
dm
dn
do
E-4
Download from Www.Somanuals.com. All Manuals Search And Download.
General Guide
• The following explains the meaning of the $ symbol that appears on the product console and with the key names below.
$ :Indicates a function that is enabled by holding down the button for some time. For example, METRONOME, BEAT $ means that the BEAT
function is enabled by holding down the button for some time.
1VOLUME knob ☞E-10
2POWER button ☞E-10
bsPIANO/ORGAN button ☞E-13
btCHORD BOOK button ☞E-43
ckFUNCTION button ☞E-7
clBANK, LISTEN button ☞E-32, 47
cmArea1, WATCH button ☞E-32, 47
cnArea2, REMEMBER button ☞E-33, 47
coArea3, NEXT button ☞E-31, 47
cpArea4, AUTO button ☞E-35, 47
cqSTORE, MUSIC CHALLENGE button ☞E-36, 48
crSPLIT button ☞E-14
3INTRO, REPEAT button ☞E-27, 40
4NORMAL/FILL-IN, REW button ☞E-27, 40
5VARIATION/FILL-IN, FF button ☞E-27, 40
6SYNCHRO/ENDING, PAUSE button ☞E-27, 41
7START/STOP, PLAY/STOP button ☞E-26, 37
$
8ACCOMP, CHORDS
, PART SELECT button
☞E-28, 38
9TEMPO buttons ☞E-12, 28, 41
bkRECORDER button ☞E-49
blRHYTHM EDITOR button ☞E-44
$
button ☞E-14
csLAYER,
ctAUTO HARMONIZE/ARPEGGIATOR,
$
$
bmMETRONOME, BEAT
button ☞E-12
TYPE
button ☞E-42, 56
$
button ☞E-26
bnSONG BANK,
boRHYTHM, ONE TOUCH PRESET
dkSpeakers
dlDisplay
$
button
☞E-37, 41
dmPITCH BEND wheel ☞E-17
dnCHORD root names ☞E-38
doPercussion instrument list ☞E-13
$
button ☞E-13, 55
bpTONE, MUSIC PRESET
$
button ☞E-59
bqCARD, LOAD/SAVE
brNumber buttons, [–] [+] keys ☞E-7
/
E-5
Download from Www.Somanuals.com. All Manuals Search And Download.
General Guide
■ Back
dp
dq
dr ds dt
dtDC 12V terminal ☞E-9
ek el em
dpSD CARD SLOT ☞E-59
dqUSB port ☞E-64
drSUSTAIN/ASSIGNABLE JACK ☞E-9
dsAUDIO IN jack ☞E-68
ekPHONES/OUTPUT jack ☞E-10, 68
elMIC IN/SAMPLING jack ☞E-18
emMIC VOLUME knob ☞E-18
E-6
Download from Www.Somanuals.com. All Manuals Search And Download.
General Guide
See
Function
Transpose
Display
Trans.
Using the 10-key Pad (br)
Page
E-16
E-41
E-28
E-11
E-16
E-15
E-15
Use the number buttons and the [–] and [+] keys to change
the settings of the parameters that appear in the upper left
area of the display.
1
2
3
4
5
6
7
8
Accompaniment Volume
Song Volume
AcompVol
Song Vol
Touch
Touch Response
Tuning
Tune
Reverb
Reverb
Chorus
Chorus
Setting
Sampling
SAMPLING
AutoStrt
AutoStop
(Protect)
LESSON
Speak
Automatic Sampling Start
Automatic Sampling Stop
Sampled Tone Protect
Step Up Lesson
Voice Fingering Guide
Note Guide
E-24
E-24
E-25
9
S t . G r P n o
E-33
E-34
E-34
E-34
E-54
NoteGuid
Scoring
Number Buttons
Performance Evaluation
Phrase Length
Use the number buttons to enter numbers and values.
• Enter the same number of digits as the currently displayed
value.
PhraseLn
SCALE
10 Preset Scales
11 Other Settings
Arpeggiator Hold
Pedal Effect
OTHER
ArpegHld
Jack
Example: To enter tone number 001, input 0 3 0 3 1.
E-56
E-16
E-17
E-55
E-11
• Negative values cannot be input using the number buttons.
Use [–] (decrease) and [+] (increase) instead.
Pitch Bend Range
Accompaniment Scale
LCD Contrast
Bend Rng
AcompScl
Contrast
MIDI
[–] and [+] Keys
12 MIDI Settings
Keyboard Channel
Navigate Channels
Local Control
Keybd Ch
Navi. Ch
Local
E-65
E-65
E-66
E-66
You can use the [–] (decrease) and [+] (increase) keys to
change the displayed number or value.
• Holding down either key scrolls the displayed setting.
• Pressing both keys at the same time will revert to the initial
default setting or the recommended setting.
Accomp Out
AcompOut
DELETE
(tone name)
13 Delete
Sampled Sound Delete
User Rhythm Delete
User Song Delete
All Data Delete
E-25
FUNCTION Button (ck) Functions
(rhythm name) E-46
(song name)
All Data
E-57
E-57
You can use the FUNCTION button (ck) to adjust the reverb
effect, to delete data, and to perform a wide range of other
Digital Piano operations.
To select a function
• The tone and other parameters revert to their initial
defaults whenever you turn on power (page E-10).
1.
2.
Press ck (FUNCTION) to display the function
menu.
Use the br (10-key) [4] (U) and [6] (I) keys to
display the function you want.
• You can exit the function menu by pressing ck
(FUNCTION).
• After selecting functions 8 through 13, press the br
(10-key) [9] (ENTER) key to display the menu item’s
submenu. Then use [4] (U) and [6] (I) to select an
item. You can exit a submenu by pressing the br
(10-key) [7] (EXIT) key.
3. Refer to the indicated pages for details about
each function.
E-7
Download from Www.Somanuals.com. All Manuals Search And Download.
General Guide
Returning the Digital Piano to Its
Factory Default Settings
Perform the following procedure when you want to return the
Digital Piano’s stored data and settings to their initial factory
defaults.
1. Turn off the Digital Piano.
2.
While holding down bn (SONG BANK) and the
[1] 10-key (br) key at the same time, press 2.
• Keep bn (SONG BANK) and the [1] 10-key (br) key
depressed until the next step is complete.
3. When the message “Pls wait” appears on the
screen, release bn (SONG BANK) and the [1]
10-key (br) key.
• You will be able to use the Digital Piano in a short while
after its system is initialized.
• See “Turning on Power and Playing” (page E-10) for
information about turning Digital Piano on and off.
E-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Ready to Play
Note the following important precautions to avoid
damage to the power cord.
Preparing the Music Stand
During Use
• Never pull on the cord with excessive force.
• Never repeatedly pull on the cord.
• Never twist the cord at the base of the plug or connector.
Music stand
During Movement
• Before moving the Digital Piano, be sure to unplug the AC
adaptor from the power outlet.
During Storage
• Loop and bundle the power cord, but never wind it around
the AC adaptor.
Connecting a Pedal Unit
• Never connect the AC adaptor (JEITA Standard, with
unified polarity plug) that comes with this Digital Piano
to any other device besides this Digital Piano. Doing so
creates the risk of malfunction.
• Make sure the Digital Piano is turned off before
plugging in or unplugging the AC adaptor.
• The AC adaptor will become warm to the touch after
very long use. This is normal and does not indicate
malfunction.
SUSTAIN/ASSIGNABLE JACK
Power Supply
Your Digital Piano runs on standard household power. Be
sure to turn off power whenever you are not using the Digital
Piano.
Using the AC Adaptor
Use only the AC adaptor (JEITA Standard, with unified
polarity plug) that comes with this Digital Piano. Use of a
different type of AC adaptor can cause malfunction of the
Digital Piano.
Specified AC Adaptor: AD-A12150LW
• Use the supplied power cord to connect the AC adaptor as
shown in the illustration below.
Household power outlet
AC Adaptor
DC 12V terminal
Power cord
E-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing the Digital Piano
1
bp
br
ck
2
9
bm
Auto Power Off
Turning on Power and Playing
If you do not perform any operation for 30 minutes, the Digital
Piano will turn off automatically.
1.
Press 2.
This turns on power.
■ Disabling Auto Power Off
You can disable Auto Power Off to ensure that power is not
turned off automatically during a concert, etc.
• To turn off the Digital Piano, press 2 again.
2.
Try playing something on the keyboard. Use 1
to adjust volume.
1.
While holding down bp (TONE), turn on power.
Auto Power Off will be disabled.
Using Headphones
Using headphones cuts off output from the built-in speakers,
which means you can practice playing even late at night
without disturbing others.
• Be sure to turn down the volume level before connecting
headphones.
• If you press 2 only lightly, the display will light up
momentarily but power will not turn on. This does not
indicate malfunction. Press 2 firmly and completely
to turn on power.
• Turning off the Digital Piano causes most current
settings to be cleared. The Digital Piano will revert to
initial settings the next time you turn it on.
This is true for all settings except for sample sound
protection. Once you turn it on it remains on until you
turn it off again.
PHONES/OUTPUT jack
• The message “Pls wait” will remain on the display
while a data save operation is in progress. Do not
perform any other operation while it is displayed.
Turning off the Digital Piano or removing the memory
card can cause Digital Piano data to be deleted or
become corrupted.
• Headphones do not come with the Digital Piano.
• Use commercially available headphones. See page E-3 for
information about options.
• Do not listen to very high volume output over
headphones for long period. Doing so creates the risk
of hearing damage.
• If you are using headphones that require an adaptor
plug, make sure you do not leave the adaptor plugged
in when removing the headphones.
B
E-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing the Digital Piano
Changing Touch Response Sensitivity
Changing Keyboard Response to
Touch Pressure
(Touch Response)
Use the procedure below to control how much the volume of
played notes change in accordance with playing speed.
Select the setting that best matches your playing style.
Touch Response alters tone volume in accordance with
keyboard pressure (speed). This provides you some of the
same expressivity you get on an acoustic piano.
1.
Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
“Touch” (page E-7).
T o u c h
Pressing fast produces
louder notes.
2.
Use br (10-key) [–] and [+] keys to select one of
the four Touch Response sensitivity settings.
Off (oFF)
Touch Response is turned off. Sound
volume is fixed, regardless of key press
speed.
Pressing slowly produces
softer notes.
Type 1 (1)
Normal Touch Response
Type 2 (2)
Type 3 (3)
More sensitive Touch Response than Type 1
Less sensitive Touch Response than Type 1
Do not try to use too much
pressure.
Adjusting Display Contrast
1.
Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
“OTHER” (page E-7).
Flashes
O T H E R
2.
3.
Press br (10-key) [9] (ENTER) key.
Use the br (10-key) [4] (U) and [6] (I) keys to
display “Contrast”.
C o n t r a s t
4.
Use the br (10-key) [–] and [+] keys to adjust
the contrast.
• The contrast setting range is 01 to 17.
E-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing the Digital Piano
Changing the Metronome Tempo
Using the Metronome
The metronome lets you play and practice along with a steady
Use the following procedure to change the tempo of the
metronome.
beat to help keep you on tempo.
1.
Press 9.
Start/Stop
Use w (slower) and q (faster) to change the tempo
setting. Holding down either button changes the setting at
high speed.
Press bm.
1.
This starts the metronome.
• Pressing q and w at the same time will initialize the
tempo setting in accordance with the currently selected
song or rhythm.
This pattern changes with each beat.
• Pressing 9 causes the tempo value to flash on the
display. While the tempo value is flashing, you can use
br (10-key) to change it.
Note that you must input leading zeros, so 89 is input
as 089.
• The tempo value will stop flashing if you do not perform
any operation for a short while.
2.
Press bm again to stop the metronome.
Changing the Beats per Measure
Tempo value (flashes)
You can configure the metronome to use a bell sound for the
first beat of each measure of the song you are playing.
• You can specify 0, or a value from 2 to 6 as the number of
beat per measure.
• When playing a built-in song, the beats per measure setting
(which determines when the bell sounds) is configured
automatically for the currently selected song.
Changing the Metronome Sound Volume
The metronome volume setting is changed automatically with
the volume level of the currently selected Auto
Accompaniment or song. The metronome volume cannot be
adjusted independently.
• For information about changing the Auto Accompaniment
volume, see page E-41.
1.
2.
Hold down bm until the beats per measure
setting screen appears on the display.
• For information about changing the song volume, see page
E-28.
B e a t
• If you do not perform any operation for a few seconds
after the beats per measure setting screen appears, the
display will return to the screen displayed before you
• You cannot adjust the balance between the metronome
and note volume during Auto Accompaniment and built-in
tune play.
pressed bm.
Use br (10-key) to enter the number of beats
per measure.
• The bell will not sound if you specify 0 for this setting. In
this case, all beats are indicated by a click sound. This
setting lets you practice with a steady beat, without
worrying how many beats there are in each measure.
E-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Keyboard Sounds
bp
br
bs ck
cr cs
3. Try playing something on the keyboard.
Select from a variety of musical
instrument sounds
The tone of the instrument you selected will sound.
Your Digital Piano lets you select tones for a wide variety of
musical instrument sounds, including violin, flute, orchestra,
and more. Even the same song sound takes on a different feel
by changing the instrument type.
To select an instrument for playing
1.
2.
Press bp (TONE).
Playing with a Piano or Organ Tone
Tone number
Tone name
Pressing bs toggles between the piano and organ modes.
Each press of bs toggles the tone setting between a piano
tone (Tone Number 001) and an organ tone (Tone Number
089).
S t . G r P n o
In addition to the tone number, you also can configure the
settings listed below.
Use br (10-key) to select the tone number you
Reverb
: “06”
want.
Transpose
Touch Response
: “00”
The corresponding tone number and tone name will
appear on the screen.
• Use the number buttons to enter the tone number.
Specify three digits for the tone number.
Example: To select 001, enter 0 3 0 3 1.
: Off:Returns to initial default
On:No change
Pedal Effect
: SUS
Rhythm Number
: “181” (When a piano tone is selected)
“108” (When an organ tone is selected)
Accompaniment
Local Control
Drum Assign
Split
Layer
Chorus
: Rhythm part only
: On
: Off
: Off
: Off
: Off
• See the separate “Appendix” for a complete list of available
tones.
• When one of the drum sets is selected (tone numbers 684
through 700), each keyboard key is assigned a different
percussion sound.
Octave Shift (Upper): “0”
Auto Harmonize
Arppegiator
Scale
: Off
: Off
: Equal
E-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Keyboard Sounds
Layering Two Tones
You can use the following procedure to layer two different
tones (such as piano and strings) so they sound
simultaneously when you press a keyboard key.
Splitting the Keyboard between
Two Different Tones
You can use the procedure below to assign different tones to
the right range and left range of the keyboard, so it sounds
like you are playing an ensemble between two instruments.
1. Select the first tone you want to use.
Press bp (TONE) and then use br (10-key) to select the
To select the two tones for a split keyboard
tone you want.
Example: 038 ELEC.PIANO 1
1. Select the tone for the right side range (page
E-13).
Press bp (TONE) and then use br (10-key) to select the
tone you want.
Example: 365 FLUTE 1
E . P i a n o 1
2.
3.
Press cs.
F l u t e 1
2.
3.
Press cr.
Lights
Use br (10-key) to select the second tone you
want.
Example: 238 STRINGS 1
Lights
Use br (10-key) to select the left side range
tone you want.
g
S t r i n s 1
Example: 074 VIBRAPHONE 1
4. Play something on the keyboard.
Both tones sound at the same time.
V i b e s 1
5.
Pressing cs again to unlayer the keyboard (so
it plays only the tone you selected in step 1).
4. Play something on the keyboard.
• Each press of cs toggles between layered (two tones)
This will sound the tones assigned to the left and right
side ranges of the keyboard.
and unlayered (one tone).
VIBRAPHONE 1
Split point
FLUTE 1
F3
E-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Keyboard Sounds
5.
Pressing cr again to unsplit the keyboard (so it
Using Chorus
plays only the tone you selected in step 1).
Chorus is a function that adds depth and breadth to notes. It
makes you sound as if you are playing multiple instruments.
• Each press of cr toggles between split (two tones) and
unsplit (one tone).
1.
Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
• If you turn on both layer and split, layering will be applied to
the right side range of the keyboard only.
“Chorus” (page E-7).
To change the split point
C h o r u s
While holding down cr, press the keyboard key
1.
where you want the split point to be.
2.
Use the br (10-key) [–] and [+] keys to select
the chorus type you want.
There are five chorus types, plus an off setting.
The key you press will become the lowest note of the right
side range of the split keyboard.
Example: Setting middle C (C4) as the split point.
Key name
C 4
Indicator disappears when chorus is turned off.
Using Reverb
Reverb adds reverberation to notes. You can change the
duration of the reverb.
• The actual effect produced by chorus depends on the tone
you are using.
1.
Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
“Reverb” (page E-7).
R e v e r b
2.
Use the br (10-key) [–] and [+] keys to select
the reverb setting you want.
Off (oFF)
1 to 10
Turns off reverb.
The larger the number selected, the longer
the reverb duration.
Indicator disappears when reverb is turned off.
E-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Keyboard Sounds
Using a Pedal
A pedal can be used to change notes in various ways while
Changing the Pitch
(Transpose, Tuning, Octave Shift)
playing.
Changing the Pitch in Semitone Steps
(Transpose)
Selecting the Pedal Effect
1.
Press ck (FUNCTION) and then use the br
The transpose feature lets you change the pitch, in semitone
steps. A simple operation lets you instantly change the pitch
to match that of a singer.
(10-key) [4] (U) and [6] (I) keys to display
“OTHER” (page E-7).
• The transpose setting range is –12 to +12 semitones.
Flashes
1.
Press ck (FUNCTION).
O T H E R
T r a n s .
2.
3.
Press br (10-key) [9] (ENTER) key.
2.
Use the br (10-key) [–] and [+] keys to select
Use the br (10-key) [4] (U) and [6] (I) keys to
the transpose setting you want.
display “Jack”.
Fine Tuning (Tuning)
Use the tuning feature when you need to adjust the pitch
slightly to play along with another musical instrument. Also,
some artists perform their music with slightly altered tuning.
You can use the tuning feature to adjust tuning so it exactly
matches a performance on a CD.
• The tuning feature specifies the frequency of the A4 note.
You can set a frequency within the range of 415.5 to
465.9 Hz. The initial default setting is 440.0 Hz.
J a c k
Use the br (10-key) [–] and [+] keys to select
the pedal effect you want.
• The following shows the available pedal effects.
4.
Sustain
(SUS)
Sustains notes played while the pedal is
depressed. Organ and other similar tone
notes are sustained even if the pedal is not
pressed.
1.
Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
“Tune” (page E-7).
Sostenuto
(SoS)
Sustains notes that are playing when the
pedal is depressed before the keyboard
keys are released.
T u n e
Soft
(SFt)
Slightly softens notes played while the pedal
is depressed.
2.
Use the br (10-key) [–] and [+] keys to adjust
Rhythm
(rHy)
Pressing the pedal starts and stops Auto
Accompaniment or song playback.
the tuning.
• Performing this step causes the display to change from
“Tune” to a value that indicates the current frequency
setting as shown below. You can change the frequency
in 0.1 Hz steps.
4 4 0 . 0 H z
• Even if you do not perform a br (10-key) operation to
adjust the tuning, the current frequency setting will
appear automatically after a few seconds.
E-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Keyboard Sounds
Octave Shift
Using the Pitch Bend Wheel to
Shift the Pitch of Notes
Octave Shift lets you raise or lower the pitch of the keyboard
notes in octave units.
• The octave shift setting range is –2 to +2 octaves.
• When using Split (page E-14), you can individually set the
left and right keyboard ranges to the pitches you want.
You can use the pitch bend wheel to slide the pitch of notes
smoothly upwards and downwards. This technique makes it
possible to produce effects that are similar to sounds
produced when bending notes on a saxophone or electric
guitar.
Keep pressing cs until the screen shown below
1.
appears on the display.
If you want to use Split, turn on Split before pressing cs.
To play with the pitch bend wheel
• If you do not perform any operation for a few seconds
after this screen appears, the display will return to the
previous screen automatically.
1. While playing a note on the
keyboard, rotate the pitch bend
wheel on the left of the keyboard
upwards or downwards.
p p
O c t U
e r
The amount the note bends depends on how
much you rotate the pitch bend wheel.
• Do not have the pitch bend wheel rotated
as you turn on the Digital Piano.
Use the br (10-key) [–] and [+] keys to shift the
2.
3.
octave.
• Split On : This step affects the right side keyboard
Specifying the Pitch Bend Range
range only.
• Split Off : This step affects the entire keyboard range.
Use the following procedure to specify how much the pitch of
the note changes whenever the pitch bend wheel is rotated
upwards or downwards. You can specify a range from 0 to 12
semitones (one octave).
Press cs.
• Split On : The screen shown below will appear. Use the
br (10-key) [–] and [+] keys to shift the
1.
Press ck (FUNCTION) and then use the br
octave for the left side keyboard range.
• Split Off : The screen shown below will appear.
Advance to step 4.
(10-key) [4] (U) and [6] (I) keys to display
“OTHER” (page E-7).
Flashes
O c t L o w e r
O T H E R
Press cs again.
4.
2.
3.
Press br (10-key) [9] (ENTER) key.
Use the br (10-key) [4] (U) and [6] (I) keys to
display “Bend Rng”.
g
B e n d R n
4.
Use the br (10-key) [–] and [+] keys to change
the range.
E-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Sampling Sounds and Playing Them on the Digital
Piano
bo bp
br
bsbtck
cl cm cn co cp cq
You can use the Digital Piano to sample a sound from a
microphone, and then play the sound with keyboard keys. For
example, you could sample the bark of your dog and then use
the sound in a melody. The sampling feature is a great way to
create new sounds that are highly creative.
2. Turn the volume levels of the Digital Piano
down.
3. Turn on the microphone and then the Digital
Piano.
4.
Use em (MIC VOLUME) to adjust the volume
Connection and Preparation
level of microphone input.
• Turn off the microphone and the Digital Piano before
connecting them.
• It will take a few seconds after you turn on the Digital Piano
before you will be able to use the microphone.
• Sampled sounds are recorded in monaural.
1. Connect a microphone.
MIC IN/SAMPLING jack
• Use a commercially available dynamic microphone.
• You cannot sample sounds input from through the AUDIO
IN jack.
B
E-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Sampling Sounds and Playing Them on the Digital Piano
3. Output the sound in the direction of the
Sampling and Playing a Melody
Sound (Melody Sampling)
Use the procedures in this section to sample a sound and play
it as the melody part on the Digital Piano.
microphone.
Sampling will start automatically.
• Sampling will not start if the volume of the sound picked
up by the microphone is too low.
• Up to five sampled sounds can be stored in Digital Piano
memory as tone numbers 701 through 705. Simply select
the tone number where the sound you want is located to
assign the sound to the keyboard.
p
g
S a m l i n
To sample a sound
4. After the sound you want to sample is finished,
1.
Press bp (TONE) and then use br (10-key) to
press bs and bt at the same time.
enter the tone number (701 to 705) where you
Sampling will stop.
• Even if you do not press bs and bt, sampling will stop
want to store the sampled sound.
automatically whenever there is no more sound being
No sampled sound stored
input from the microphone. Sampling also will stop
automatically 10 seconds after it is started.
N o D a t a
g
S 1 : O r n l
Sampled sound 1
Lights
Used memory
(Unit: Kbytes)
Remaining
memory capacity
2.
Press bs and bt at the same time.
This enters sampling standby.
The allowable sampling time (in seconds) will appear on
the display momentarily and then the display will change
to the following.
5. Play something on the Digital Piano.
• You may not be able to get 10 seconds of sampling if
Digital Piano memory is low due to storage of other data. If
this happens, deleting other memory data you no longer
need will free up memory space and you should be able to
sample for 10 seconds. See “Deleting a Sampled Sound”
on page E-25 for more information.
g
W
a i t i n
Flashes
• Sampling sound and storing it will delete any sound
data currently stored under the same tone number. To
help ensure that you do not accidentally delete
important data, be sure to read “Protecting Against
Accidental Deletion of Sampled Sounds” on page E-25.
E-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Sampling Sounds and Playing Them on the Digital Piano
■ How sampled sounds are played
Changing the Volume of Sampled Sound
Looped Playback
Pressing Middle C (C4) will play back the original sound. The
keys to the left and right of C4 play the sound at different
pitches.
You can use the following procedure to change the volume
level of the looped playback of each sampled sound, if you
want.
1. Press the button of the sampled sound whose
volume you want to change (cm to cq).
C4
• This will cause the sounds loop to sound.
2. While the loop is sounding hold down the same
Looping a Sampled Sound
sampled sound button (cm to cq) as you press
You can use the following procedure to loop a sampled sound
so it continues to repeat, as you play on the Digital Piano.
any keyboard key.
• Pressing the keyboard key quickly will increase sample
sound volume, while pressing slowly will decrease
volume.
1.
2.
Press bo (RHYTHM).
Press bs and ck (FUNCTION) at the same time.
3. After the sampled sound is at the volume level
This enters repeat standby.
you want, release its button (cm to cq).
y
p
S n t h P o
Lights
3.
Press the button (cmto cq) that corresponds to
the melody sampling tone number you want to
select.
This will start looped playback of the selected sound.
To select this tone number:
Press this button:
701
702
703
704
705
cm
cn
co
cp
cq
4. Press the same button again to stop playback.
5.
Press cl to return to the screen that was
displayed before step 2 of this procedure.
E-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Sampling Sounds and Playing Them on the Digital Piano
Applying Effects to a Sampled Sound
Incorporating a Sampled Sound
into a Drum Set (Drum Sampling)
You can use the procedure to change the drum sounds that
You can apply various effects to sampled sounds.
1.
Press bp (TONE) and then use br (10-key) to
are assigned to each keyboard key.
enter the tone number (701 to 705) to which you
want to apply effects.
• You can store up to three drum sets and store them as tone
numbers 706, 707, and 708. Simply select the tone number
where the drum set you want is located to assign the drum
set sounds to the keyboard.
2.
Press bp (TONE) to cycle through the available
effects, described below.
1.
2.
Press bo (RHYTHM).
Effect Type
Description
(Display)
Press bp (TONE) and then use br (10-key) to
Normal sampled tone (no looping, no
Original (Orgnl)
enter the tone number (706, 707, or 708) for the
effect).
Loop 1 (Loop1) Loops the sampled sound.
Loops the sample sound and raises the
drum set whose sounds you want to change.
Loop 2 (Loop2) pitch of the resonating sound when the
keyboard key is released.
N o D a t a
Loops the sample sound and lowers the
Loop 3 (Loop3) pitch of the resonating sound when the
keyboard key is released.
Changes the pitch from low to high, at an
Pitch 1 (Ptch1)
increasing rate.
Lights
Changes the pitch from high to low, at a
Pitch 2 (Ptch2)
decreasing rate.
3.
Press bs and bt at the same time.
Changes the pitch from high to low, at a
decreasing rate, and then raises the pitch
when the key is released.
Pitch 3 (Ptch3)
Tremolo (Treml) Alternates volume between high and low.
Adds vibrato and changes the pitch by a
Funny 1 (Funy1)
N o D a t a
gradually increasing amount.
Alternates between high pitch and low
Funny 2 (Funy2)
pitch.
Flashes
Adds vibrato and changes the pitch from
Funny 3 (Funy3)
low to high.
• Avoid assigning the same sampled sound (tone number
701 to 705) to the keyboard for play along and for looped
play. Doing so will cause, the Loop 1 effect to be applied to
the keyboard tone while looped play of the sampled sound
is being performed.
E-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Sampling Sounds and Playing Them on the Digital Piano
4. Press the keyboard key* to which you want to
assign the drum sound you are about to
sample.
6. After the sound you want to sample is finished,
press bs and bt at the same time.
This enters sampling standby.
The allowable sampling time (in seconds) will appear on
the display momentarily and then the display will change
to the following.
p
S m l D r m 1
Used memory
(Unit: Kbytes)
Remaining memory
capacity
g
W
a i t i n
Sampling will stop.
• Even if you do not press bs and bt, sampling will stop
automatically whenever there is no more sound being
input from the microphone. Sampling also will stop
automatically 10 seconds after it is started.
Flashes
7. Press the keyboard key.
* Drum sounds cannot be assigned to these keys.
• You can repeat steps 3 through 6 to change other sounds
that make up the currently selected drum set. There are
eight sounds per drum set.
• You may not be able to get 10 seconds of sampling if
Digital Piano memory is low due to storage of other data. If
this happens, deleting other memory data you no longer
need will free up memory space and you should be able to
sample for 10 seconds. See “Deleting a Sampled Sound”
on page E-25 for more information.
C2
C7
5. Output the sound in the direction of the
microphone.
Sampling will start automatically.
• Sampling will not start if the volume of the sound picked
up by the microphone is too low.
• Sampling a sound will delete any sound data currently
assigned to the same keyboard key. To help ensure
that you do not accidentally delete important data, be
sure to read “Protecting Against Accidental Deletion of
Sampled Sounds” on page E-25.
p
g
S a m l i n
E-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Sampling Sounds and Playing Them on the Digital Piano
■ To change the pitch of a sampled sound
While holding down the keyboard key of the sampled sound
Editing Sampled Drum Set Sounds
You can use the procedures in this section to copy the drum
sound assigned to one keyboard key to another key, to
change the pitch of a sound, and to delete a sampled sound.
whose pitch you want to change, use the br (10-key) [–] and
[+] keys to change the pitch.
• You can change the pitch within a range of –64 to 63
semitones.
1.
Press bp (TONE) and then use br (10-key) to
enter the tone number (706, 707, or 708) for the
■ To delete a keyboard key’s sampled sound
While holding down the keyboard key whose sound you want
to delete, press bo(RHYTHM). In response to the “DelSure?”
drum set you want.
2.
3.
Press bs and bt at the same time.
Press ck (FUNCTION).
message that appears, press the br(10-key) [+] (YES) key to
delete, or [–] (NO) to cancel the delete operation.
• Deleting a sampled sound will return the key to its initial
default built-in sound.
Example: To delete the sound assigned to key D3
p
S m l D r m 1
Disappears
Flashes at high
speed
Using a Drum Sampling Tone in Auto
Accompaniment (Drum Assign)
This is the editing mode.
• While in the editing mode, you can copy a sound,
change the pitch of a sound, or delete a sound (each of
Use the following procedure to change the rhythm part of an
Auto Accompaniment pattern to a drum set sound that you
sampled.
which is described below). Pressing ck (FUNCTION)
again exits the editing mode and returns to step 2 of
Press bo (RHYTHM) and then use br (10-key)
1.
this procedure.
to enter the rhythm number of the Auto
Accompaniment pattern you want.
You cannot use a Drum Sampling Tone in a user rhythm,
so do not select a user rhythm in the above step.
Indicates keyboard keys that have sounds assigned.
2.
3.
Press bp (TONE) and then use br (10-key) to
enter the tone number of the sampling drum set
■ To copy a sampled sound from one key to
another
While holding down the keyboard key to which the sampled
sound you want to copy is assigned, press the keyboard key
to which you want to copy it.
that contains the sound you want to use.
Press bp (TONE).
This changes the rhythm part of the Auto Accompaniment
pattern you selected in step 1 to the sampled sound you
selected in step 2.
Example: To copy sampled sound of key C3 to key D3
• To change the Auto Accompaniment rhythm part back
to its original sound, press bp (TONE) again.
Indicates the keyboard key whose sound was copied.
• Some rhythm part drum sounds cannot be replaced by
sampled sounds.
• A keyboard key that already has a sampled sound assigned
cannot be selected as a copy destination.
E-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Sampling Sounds and Playing Them on the Digital Piano
Changing to Manual Sampling Stop
Other Sampling Functions
Normally the Digital Piano will stop sampling automatically
whenever it detects there is no sound input. You can use the
following procedure to enable manual sampling stop, which
will cause sampling to continue until you press a button to
stop it. You can use this to insert silence after the sampled
sound.
Changing to a Manual Sampling Start
Normally when the Digital Piano is in sampling standby, it will
start sampling automatically whenever it detects sound input.
You can use the following procedure to enable manual
sampling start, which will cause sampling to wait until you
press a button to start it. You can use this to insert silence
before the sampled sound.
1.
Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
“SAMPLING” (page E-7).
1.
Press ck (FUNCTION) and then use the br
Press the br (10-key) [9] (ENTER) key.
Press the br (10-key) [6] (I) key.
2.
3.
(10-key) [4] (U) and [6] (I) keys to display
“SAMPLING” (page E-7).
Flashes
S A M P L I N G
p
A u t o S t o
2.
3.
Press the br (10-key) [9] (ENTER) key.
4.
Press the br (10-key) [–] key to turn off
automatic sampling stop.
Sampling continues until you perform one of the
operations below, even if nothing is being input from the
microphone.
A u t o S t r t
• Melody sampling (page E-19)
Press bs and bt at the same time.
Press the br (10-key) [–] key to turn off
• Drum sampling (page E-21)
Press bs and bt at the same time, or press any
automatic sampling start.
keyboard key.
This enables manual sampling start, which operates as
described below.
• Melody sampling (page E-19):
Sampling starts when you press bs and bt, which you
press in step 2 of the sampling procedure.
• Drum sampling (page E-21):
Sampling starts when you release the Digital Piano key
you press in step 4 of the sampling procedure.
E-24
Download from Www.Somanuals.com. All Manuals Search And Download.
Sampling Sounds and Playing Them on the Digital Piano
Deleting a Sampled Sound
Protecting Against Accidental Deletion of
Sampled Sounds
You can use the following procedure to specify a sampled
tone number and delete its data.
You can use the following procedure to protect each sampled
sound against accidental deletion.
1.
Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
1.
Press bp (TONE) and then use br (10-key) to
“DELETE” (page E-7).
enter the tone number of the sampled tone you
want to protect.
Flashes
2.
Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
D E L E T E
“SAMPLING” (page E-7).
3.
4.
Press the br (10-key) [9] (ENTER) key.
2.
Press the br (10-key) [9] (ENTER) key.
Use the br (10-key) [4] (U) and [6] (I) keys to
display “Protect”.
g
S 1 : O r n l
P r o t e c t
Used memory
(Unit: Kbytes)
Remaining
memory capacity
5.
Press the br (10-key) [+] key to turn on
protection.
Once protected a tone cannot be deleted.
A protected tone is indicated as shown below.
3.
4.
Use the br (10-key) [–] and [+] keys to select
the tone number of the data you want to delete.
Press the br (10-key) [9] (ENTER) key.
g
1 : O r n l
*
This displays a delete confirmation message.
Protected
S u r e ?
■ Saving Sample Data on an External Device
• Memory card (page E-60)
• Computer (page E-67)
5.
Press the br(10-key) [+] (YES) key to delete the
data, or [–] (NO) or [7] (EXIT) to cancel the
delete operation.
• After the delete procedure is complete, “Complete” will
appear on the display followed by the screen in step 1
of the above procedure.
• For information about deleting individual drum sounds
in a drum sampling set, see “Editing Sampled Drum Set
Sounds” on page E-23.
E-25
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Built-in Songs
bn
br
ck
3 4 5 6 7 8
9
With this Digital Piano, built-in tune data is referred to as
“songs”. You can listen to the built-in songs for your own
enjoyment, or you can play along with them for practice.
Playing Back a Particular Song
Use the procedure below to play back one of the built-in
songs. You can play along on the keyboard with song
playback.
• In addition to simple listening enjoyment, the built-in songs
can be used with the lesson system (page E-30) for
practice.
Start/Stop
• You can increase the number of tunes using your memory
cards (page E-61) or computer (page E-67).
1.
Press bn (SONG BANK).
Lights Song number
Tune name
Playing the Demo Songs
Use the following procedure to play back built-in songs.
T w i n k l e
1.
Press 7 and 8 at the same time.
This will start playback of the demo songs.
• See page E-74 for information about song numbers and
the song sequence.
Use br(10-key) to enter the number of the song
2.
3.
you want.
• Demo playback always starts from song number 151.
• See page E-74 for a complete list of available songs.
• Use the number buttons to enter the song number.
Specify three digits for the song number.
Flashes
Song number
Tune name
Example: To select 001, enter 0 3 0 3 1.
Press 7.
D e m o T u n e
This starts playback of the song.
Beat
Note
2. To change to another song while demo
Key
Sustain pedal
playback is in progress, use br (10-key) [–] and
[+] keys to enter the song number you want
(page E-7).
This will cause demo playback to jump to the song whose
number you entered.
• You cannot use br(10-key) number buttons to select a
song.
Tempo
Fingering
3.
To stop demo playback, press 7.
Measure
Demo playback continues until you stop it by pressing 7.
E-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Built-in Songs
4.
Press 7 again to stop playback.
Repeating Playback of Specific Measures
Song playback will continue (repeat) until you press 7 to
You can use the procedure in this section to repeat particular
measures for practice playing along until you master it. You
can specify the start measure and the end measure of the
section you want to play and practice.
stop it. You can cancel song repeat by pressing 3.
Indicator disappears
when song repeat is
turned off.
Start
End
Pause, Skip Forward, Skip Back
These measures are repeated.
Use the operations in this section to perform pause, skip
forward, and skip back operations.
1.
Press 3 to temporarily turn off song repeat.
■ Pause
1.
2.
Press 6.
Disappears
This pauses song playback.
Press 6 again to resume playback from the
point where you paused it.
2. When song playback reaches the measure you
want to specify as the start measure, press 3.
■ Skip Forward
This specifies the measure as the start measure.
1.
Press 5.
Flashes
This skips song playback forward to the next measure.
Each press of 5 skips ahead one measure. Holding
down 5 skips forward at high speed until you release it.
• Pressing 5 while song playback is stopped performs
lesson function phrase skip forward (page E-31).
Measure number
3. When playback reaches the measure you want
to select as the end measure, press 3 again.
This specifies the measure as the end measure and starts
repeat playback of the measures in the specified range.
■ Skip Back
• During repeat play you can use 6 to pause playback,
1.
Press 4.
5 to skip forward, or 4 to skip back.
This skips song playback back to the previous measure.
Each press of 4 skips back one measure. Holding down
Lights
4 skips back at high speed until you release it.
• Pressing 4 while song playback is stopped performs
lesson function phrase skip back (page E-31).
E-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Built-in Songs
4.
Pressing 3 again returns to normal playback.
Changing the song number clears the start measure and
end measure of the repeat operation.
Playing with the Tone as Song Playback
The procedure below lets you select the same keyboard tone
as the one being used in the song and play along with your
favorite tunes.
Disappears
1.
After selecting a song, hold down bn (SONG
BANK) for about two seconds until the
displayed tone name changes to the tone name
of the song.
• If your currently selected tone is the same as the song
tone, the display contents will not change.
2. Play along with song playback.
Changing Playback Speed (Tempo)
You can use the following procedure to change the speed
(tempo) in order to slow down playback to practice difficult
passages, etc.
• If you select a song that uses different tones for left and
right hand play, the right hand part tone is assigned to the
keyboard.
1.
Press 9.
Turning Off the Part of One Hand for Practice
(Part Select)
Use w (slower) and q (faster) to change the tempo
setting. Holding down either button changes the setting at
high speed.
You can turn off the right hand part or the left hand part of a
song during playback and practice playing along with the
remaining part.
• Pressing w and q at the same time will return the
current song to its original default tempo.
• Pressing 9 causes the tempo value to flash on the
display. While the tempo value is flashing, you can use
1.
Press 8 to select the part you want to turn off.
br (10-key) to change it. The tempo value will stop
Each press of 8 cycles through the settings shown
flashing if you do not perform any operation for a short
below.
while.
• Changing the song number will return the song to its
original default tempo.
Right hand part off
Left hand part off
Both hand parts off
Both hand parts on
Adjusting the Song Volume
Use the following procedure to adjust the balance between
the volume of what you play on the keyboard and song
playback volume.
Press ck (FUNCTION) and then use the br
1.
(10-key) [4] (U) and [6] (I) keys to display
“Song Vol” (page E-7).
g
S o n
V o l
2.
Use the br (10-key) [–] and [+] keys to adjust
the song volume.
2.
Press 7.
This starts playback in accordance with the setting you
selected in step 1.
• During playback with one part turned off, only the notes of
the part that is turned off are shown on the display.
E-28
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Built-in Songs
Increasing the Selection of Songs
You can load song data from an external device and increase
the selection of songs available on the keyboard. See the
following pages for more information.
• Memory card (page E-61)
• Computer (page E-67)
• For information about how to delete song data loaded from
an external device, see page E-57.
E-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Built-in Songs to Master Keyboard Play
bn
br
ck
3 4 5 7 8
cl cm cn co cp
To master a song, it is best to break it up into shorter parts
(phrases), master the phrases, and then put everything
together. Your Digital Piano comes with a Step Up Lesson
feature that helps you to do just that.
Step Up Lesson Flow
Step Up Lesson takes you through practice of the right hand
part, left hand part, and both hand parts for each phrase of a
song. Master all of the phrases and you master the song.
Phrases
Phrase 1
• Right Hand Lesson 1, 2, 3
• Left Hand Lesson 1, 2, 3
• Both Hand Lesson 1, 2, 3
The built-in songs are pre-divided into phrases to help you
master keyboard play.
Song start
Phrase 1
Song end
4
Final
Phrase
Repeat the above to practice phrase
2, 3, 4, and so on, until you reach the
final phrase of the song.
Phrase 2
Phrase 3
. . . .
4
After mastering all of the phrases,
practice the entire song.
4
Now you have mastered the entire
song!
E-30
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Built-in Songs to Master Keyboard Play
2.
Press co (or 5) to move forward one phrase,
Messages that Appear during Lessons
or 4 to move back one phrase.
The following are the messages that appear on the display
during Step Lessons.
• Holding down 5 or 4 scrolls through phrases at high
speed.
• The Digital Piano remembers the last phrase you
practiced for up to 20 songs. To recall the last practice
phrase for the current song (if it is available), hold down
co.
Message
Description
<Phrase>
Appears when you select a phrase, when a
lesson starts, etc.
• Note that certain phrases will cause
“<Wait>” to appear instead of “<Phrase>”.
Phrase number
<Wait>
Appears when the lesson starts with an intro
or fill-in phrase that is not included in the
phrases to be practiced. Play toll advance
automatically to the next phrase after the un-
included phrase plays, so wait until then to
start playing on the keyboard.
< P h r a s e >
NextPhrs
Appears when advancing automatically to the
next phrase. This message appears following
a phrase for which “<Wait>” (see above) is
displayed, and during an Auto Step Up Lesson
(page E-35).
Listen
Watch
Appears at the start of Auto Step Up lesson 1,
2, or 3 (page E-35).
First measure of the selected phrase
Remember
3.
Press 8to select the part you want to practice.
From top
This message appears during Auto Step Up
Lesson (page E-35) immediately before
practice from Phrase 1 up until the phrase
currently being practiced.
Each press of 8 cycles through the settings shown
below.
Complete
Appears at the end of Auto Step Up Lesson
(page E-35).
Right hand practice
Left hand practice
Both hand practice
*
Selecting the Song, Phrase, and
Part You Want to Practice
First, select the song, phrase, and part you want to practice.
1. Select the song you want to practice (page
E-26).
This will select the first phrase of the song.
* This indicator (setting) is skipped if you press 8 while
a lesson is in progress.
4.
Hold down bn (SONG BANK) for about two
seconds.
The same tone used for song playback will be assigned to
the keyboard (page E-28).
E-31
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Built-in Songs to Master Keyboard Play
<Lesson 2 Guidance>
Lessons 1, 2, and 3
Master playing the correct note with the correct finger
as instructed by the guidance. Practice playing with the
correct timing.
Now it is time to start the lessons. First, select the song and
part you want to practice.
Lesson 1: Listen to the song.
4
First, listen to the example a few times to familiarize yourself
with what it sounds like.
Song playback will wait for you to play the correct note.
• Keyboard key goes from flashing to lit.
• Note guide sounds the correct note to be played.
• Voice Fingering Guide tells you what finger to use.
1.
2.
Press cl.
This starts example play.
4
To stop Lesson 1, press cl or 7.
Pressing the correct keyboard key causes song
playback to resume and the key for the next note
flashes.
Lesson 2: Watch how the song is played.
Play the song on the keyboard. During this lesson, the display
shows the key you need to press next. Voice fingering guide
also uses a simulate voice to announce which finger you
should use. Follow the instructions to press the correct
keyboard keys and play the notes. Don’t worry if you play the
wrong note. Song playback will wait until you play the correct
note. Take your time and play at your own pace.
3.
To stop Lesson 2, press cm or 7.
● If you complete Lesson 2 play to the end, a score that
rates your play appears on the screen.
Bravo!
Again!
You pass! Advance to the next lesson.
Go back and try again.
Press cm.
1.
This starts Lesson 2.
2. Play notes on the keyboard in accordance with
the instructions provided on the display and by
voice fingering guide.
During this lesson, the display shows the key you need to
press next. Voice fingering guide uses a simulate voice to
announce which finger you should use.
Flashes
Lights
E-32
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Built-in Songs to Master Keyboard Play
Lesson 3: Remember what you learned as
you play.
Lesson Settings
Though song playback stands by waiting for you to press the
correct keys as in Lesson 2, the Digital Piano does not
provide any guidance about what note you need to play next.
Remember everything you have learned up to Lesson 2 as
you play.
Playing without Phrase Repeat
You can turn off phrase repeat for Lessons 1, 2, and 3.
1.
Press 3.
This disables phrase repeat play.
Press cn.
1.
Disappears
This starts Lesson 3.
2. Play the song along with the song playback.
<Lesson 3 Guidance>
Press the keyboard keys you learned in Lesson 2.
4
Song playback will wait for you to play the correct note.
• Note guide sounds the correct note to be played.
Turning Off Voice Fingering Guide
4
Use the following procedure to turn off voice fingering guide,
which tells you which finger to use to play each note in
Lesson 2 and Lesson 3.
If you are still unable to press the correct keyboard
key, the Digital Piano will display keyboard guidance
and voice fingering guide will tell you what finger to
use, just as in Lesson 2.
Press ck (FUNCTION) and then use the br
1.
(10-key) [4] (U) and [6] (I) keys to display
“LESSON” (page E-7).
4
Flashes
Pressing the correct key will cause song playback to
resume.
L E S S O N
3.
To stop Lesson 3, press cn or 7.
• If you complete Lesson 3 play to the end, a score that
rates your play appears on the screen the same as with
Lesson 2.
Press br (10-key) [9] (ENTER) key.
2.
3.
Playing a Particular Song All the Way
Through
p
S e a k
After you successfully complete all of the phrases in Lessons
1, 2, and 3, it is time to try playing the entire song from
beginning to end.
Press the br (10-key) [–] key to select the OFF
setting.
1.
Use 8 to turn off both hand parts and then
press 7.
Try playing with both hands and find out how the Digital
Piano evaluates your effort.
E-33
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Built-in Songs to Master Keyboard Play
Turning Off Note Guide
Changing the Phrase Length
Use the following procedure to turn off note guide, which
sounds the note to be played next in Lesson 2 and Lesson 3.
You can use the following procedure to change the length of
lesson phrases, or to configure the lesson feature so the song
is played all the way through, without being divided into
phrases.
1.
Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
Press ck (FUNCTION) and then use the br
1.
“LESSON” (page E-7).
(10-key) [4] (U) and [6] (I) keys to display
2.
3.
“LESSON” (page E-7).
Press br (10-key) [9] (ENTER) key.
Use the br (10-key) [4] (U) and [6] (I) keys to
Press br (10-key) [9] (ENTER) key.
2.
3.
display “NoteGuid”.
Use the br (10-key) [4] (U) and [6] (I) keys to
display “PhraseLn”.
N o t e G u i d
P h r a s e L n
Press the br (10-key) [–] key to select the OFF
4.
setting.
Use the br (10-key) [–] and [+] keys to select
4.
the phrase length you want.
Turning Off Performance Evaluation
Off (oFF)
Preset (PrE)
The phrase length is from the beginning
to the end of the song.
Use the following procedure to turn off performance
evaluation, which evaluates your performance and displays a
score in Lesson 2 and Lesson 3.
Phrase lengths are as specified in the
song.
1.
Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
The following options are available for songs loaded from
external sources only.
“LESSON” (page E-7).
2.
3.
Press br (10-key) [9] (ENTER) key.
Short (Ln1)
Middle (Ln2)
Long (Ln3)
Length of one phrase is one measure.
Length of one phrase is two measures.
Length of one phrase is four measures.
Use the br (10-key) [4] (U) and [6] (I) keys to
display “Scoring”.
S c o r i n g
4.
Press the br (10-key) [–] key to select the OFF
setting.
E-34
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Built-in Songs to Master Keyboard Play
■ Auto Step Up Lesson Procedure
Using Auto Step Up Lesson
With Auto Step Up Lesson, the Digital Piano advances
Phrase 1
Lesson 1
through each lesson automatically.
4
Lesson 2
1. Select the song and part you want to practice
4
(page E-26).
Lesson 3
2.
Press cp.
4
Listen to the first phrase in Lesson 1.
• In Lesson 1, the sample phrase is played only once
before advancing to Lesson 2.
Phrase 2
Lesson 1
4
Lesson 2
3. Auto Step Up Lesson stops automatically after
you are able to get through all of the lessons
successfully.
4
Lesson 3
4
• In Lesson 2 and Lesson 3, the Digital Piano advances
to the next lesson if you are able to achieve the “Bravo!”
evaluation result.
Phrase 1, 2
• Lesson 3*
• To cancel a lesson, press cp or 7.
4
Phrase 3
Lesson 1
• You can change the step and phrase during Auto Step Up
4
Lesson using 4, 5, and cl to co.
Lesson 2
• Starting Auto Step Up Lesson automatically turns on
4
phrase repeat (page E-33) and play evaluation (page
E-34). These features cannot be turned off during lessons.
Lesson 3
4
Phrase 1, 2, 3
• Lesson 3*
4
Next phrase practice using the same
procedure
4
Final phrase
Lesson 1
4
Lesson 2
4
Lesson 3
4
From Phrase 1 to the final phrase
• Lesson 3*
4
Lesson complete
* Auto Step Up Lesson advances to the next phrase,
regardless of whether the “Bravo!” result is attained.
E-35
Download from Www.Somanuals.com. All Manuals Search And Download.
Music Challenge Keyboard Game
bn bo bp
2
7
cq
Music Challenge is a game that measures your reaction
speed as you press keys in response to on-screen keyboard
indicators and fingering guide indications.
4. The game ends when you advance successfully
through 20 notes.
• Your playing time appears on the display. After a short
while, the playing time display changes to a score. To
clear the score from the display, press bn (SONG
BANK), bo (RHYTHM), or bp (TONE).
• You can cancel a game at any time by pressing cq or
7.
Press bn (SONG BANK).
1.
2.
Press cq.
This causes a key on the on-screen keyboard to start to
flash, and starts the Music Challenge song.
Playing time
Displayed during a game.
T i m e 1 9 . 2
M . C H A L . !
S c o r e 8 0
Number of remaining notes
Fingering
Score
3. After the on-screen keyboard indicator changes
from flashing to lit, press the indicated key with
the indicated finger as quickly as possible.
• Notes and fingering guide fingers are indicated randomly.
• The tempo of the game songs cannot be changed.
This causes the on-screen keyboard key to go out to let
you know that you cleared the first note. The next on-
screen keyboard key starts to flash, so get ready to press
the next key.
• All buttons except 2, 7, and cq are disabled while a
game is in progress.
• The time it takes you to press the keyboard key after
the on-screen key lights appears on the display (Unit:
0.1 sec). The shorter the time, the higher your score.
• Pressing a keyboard key before the on-screen key
goes from flashing to lit, will not advance to the next
note.
Time 0.3sec
M . C H A L . !
E-36
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Auto Accompaniment
bn bo bp bq
br
btck
3 4 5 6 7 8
9
ct
With Auto Accompaniment, simply select an accompaniment
pattern. Each time you play a chord with your left hand the
appropriate accompaniment will play automatically. It’s like
having a personal backup group along with you wherever you
go.
Starting and Stopping the Rhythm Part only
1.
Press bo (RHYTHM).
Rhythm number
Rhythm pattern name
• Auto Accompaniments are made up of the following three
parts.
(1) Rhythm
(2) Bass
y
p
S n t h P o
(3) Harmony
2.
3.
Use br (10-key) to select the rhythm number
you want.
You can have only the rhythm part play, or you can have all
three parts play at the same time.
• See the separate “Appendix” for information about
individual rhythms.
• Use the number buttons to enter the rhythm number.
Specify three digits for the rhythm number.
Example: To select 001, enter 0 3 0 3 1.
Playing the Rhythm Part only
The rhythm part is the foundation each Auto Accompaniment.
Your Digital Piano comes with a variety of built-in rhythms,
including 8-beat and waltz. Use the following procedure to
play the basic rhythm part.
Press 7 or 4.
This starts the rhythm.
This pattern changes with each beat.
4. Play along with the rhythm.
5.
To stop the rhythm, press 7 again.
E-37
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Auto Accompaniment
5.
Pressing 8 again returns to rhythm only
Playing All Parts
accompaniment.
Auto Accompaniment with Chords
• For information about starting Auto Accompaniment as
soon as a chord is played, see “Using Synchro Start” on
page E-41.
• You can use the split point to change the size of the
accompaniment keyboard range (page E-15).
Playing a chord with your left hand automatically adds bass
and harmony accompaniment parts to the currently selected
rhythm. It is just like having your own personal back up group
on call.
1. Start play of the Auto Accompaniment rhythm
Selecting a Chord Input Mode
part.
You can select from among the following five chord input
modes.
2.
Press 8.
This enables chord input on the accompaniment
keyboard.
• FINGERED 1
• FINGERED 2
• FINGERED 3
• CASIO CHORD
• FULL RANGE CHORD
Accompaniment keyboard
1.
2.
Hold down 8 until the chord input mode
selection screen appears on the display.
Chord input mode
C h o r d
Lights
Use the br (10-key) [–] and [+] keys to select
3. Use the accompaniment keyboard to play
the chord input mode you want.
chords.
• If you do not perform any operation after the chord input
mode selection screen appears, the display will return
automatically to the screen that was displayed before
you held down 8.
This will cause bass and harmony Auto Accompaniment
parts to be added to the rhythm part.
Chords
(no melody played)
Melody
F3
Example: Pressing D-F#-A-C on the accompaniment keyboard
4
Accompaniment for the D-F#-A-C chord (D7) sounds.
4. Play other chords with left hand as you play the
melody with your right hand.
E-38
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Auto Accompaniment
CASIO CHORD Fingering
Chord Type
Major Chords
Letters above the accompaniment
keyboard indicate the chord
assigned to each key. Pressing a
single accompaniment area key in
the CASIO CHORD mode will play
the major chord whose name is
marked above the key. All of the
accompaniment area keys that are
marked with the same chord name
play exactly the same chord.
■ FINGERED 1, 2, and 3
With these three input modes, you play chords on the
accompaniment keyboard using their normal chord fingerings.
Some chord forms are abbreviated, and can be fingered with
one or two keys.
See page E-75 for information about chords that are
supported and how they are fingered on the keyboard.
Example
C (C Major)
F#G A A Bb B C C#DEb F
E
b
C
C#DEb E
F
Accompaniment keyboard
● FINGERED 1
Minor Chords
Cm (C Minor)
C
C#DEb E
F
F#G A A Bb B C C#DEb
E
F
b
To play a minor chord, press the
accompaniment area key that
corresponds to the major chord,
while also pressing one other
accompaniment area key to the
right.
Play the component notes of the chord on
the keyboard.
● FINGERED 2
Unlike FINGERED 1, 6th input is not
b
possible. m7 or m7 5 is input.
Seventh Chords
C7 (C Seventh)
C
C#DEb E
F
F#G A A Bb B C C#DEb
E
F
b
To play a seventh chord, press the
accompaniment area key that
corresponds to the major chord,
while also pressing two other
accompaniment area keys to the
right.
● FINGERED 3
Unlike FINGERED 1, allows input of
fraction chords with the lowest keyboard
note as the bass note.
Minor Seventh Chords
Cm7
(C Minor Seventh)
■ CASIO CHORD
To play a minor seventh chord,
press the accompaniment area key
that corresponds to the major
chord, while also pressing three
other accompaniment area keys to
the right.
C
C#DEb E
F
F#G A A Bb B C C#DEb
E
F
b
With CASIO CHORD, you can use
simplified fingerings to play the four types
of chords described below.
Accompaniment keyboard
• When playing a minor, seventh, or minor seventh chord, it
makes no different whether the additional keys you press
are black or white.
■ FULL RANGE CHORD
With this mode, you can use the full range
of the keyboard to play chords and the
melody.
See page E-75 for information about
chords that are supported.
Accompaniment keyboard / Melody keyboard
E-39
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Auto Accompaniment
■ Auto Accompaniment Fill-in
Use the procedure below to play a fill-in pattern during a
performance.
• A “fill-in” is a short phrase played where you want to change
the mood of a piece. A fill-in pattern can be used to create a
link between two melodies or an accent.
• Normal and variation patterns have their own unique fill-in
patterns.
Using Auto Accompaniment
Effectively
Auto Accompaniment Pattern Variations
Use the following procedures to play intro and ending
patterns, to play fill-in patterns, and to play variations of basic
Auto Accompaniment patterns.
● Normal Pattern Fill-in
■ Auto Accompaniment Variation
Each Auto Accompaniment pattern has a basic “normal
pattern” as well as a “variation pattern”.
1.
While a normal pattern is playing, press 4.
This plays the fill-in for the normal pattern.
• Normal pattern play will resume after the fill in pattern is
complete.
1.
Press 5.
Lights
This starts the variation pattern.
Lights
● Variation Pattern Fill-in
2.
1.
Pressing 4 returns to normal pattern.
While a variation pattern is playing, press 5.
This plays the fill-in for the variation pattern.
• Variation pattern play will resume after the fill in pattern
is complete.
Lights
Lights
■ Auto Accompaniment Intro
Use the following procedure to play an intro of a few
measures.
■ Auto Accompaniment Ending
1.
Press 3.
Use the following procedure to play an ending of a few
measures.
This starts the intro pattern. Normal pattern play will start
when the intro pattern is finished.
1. While an Auto Accompaniment is playing, press
• If you press 5 while an intro pattern is being played,
the variation pattern will start when the intro pattern is
6.
finished.
This will play the ending pattern and then stop Auto
Accompaniment play automatically.
Lights
Lights
E-40
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Auto Accompaniment
■ Using Synchro Start
Adjusting the Accompaniment Volume
Use the following procedure to configure the Digital Piano to
start Auto Accompaniment play as soon as you press a
keyboard key.
Use the following procedure to adjust the balance between
what you are playing on the keyboard and the volume of the
Auto Accompaniment.
1.
Press 6.
1.
Press ck (FUNCTION) and then use the br
This enters accompaniment start standby.
(10-key) [4] (U) and [6] (I) keys to display
Flashes
“AcompVol” (page E-7).
p
A c o m V o l
2.
Use the br (10-key) [–] and [+] keys to adjust
the accompaniment volume.
2. Play a chord on the keyboard.
This will start full part accompaniment (normal).
Using One-Touch Preset
With One-Touch Preset, the Digital Piano automatically
configures optimal tone, tempo, and other settings in
accordance with the rhythm pattern you select.
Any of the following operations can be performed while in
synchro standby to start a non-normal pattern.
• To start with intro pattern, press 3.
• To start with variation pattern play, press 5.
1.
Hold down bo (RHYTHM) until the current tone
Changing Auto Accompaniment Speed
(Tempo)
screen appears on the display.
This will automatically apply the One-Touch Preset
settings in accordance with the rhythm pattern that is
currently selected.
Use the following procedure to change Auto Accompaniment
speed to a level that suits you.
2. Play a chord on the keyboard.
1.
Press 9.
This will start accompaniment automatically.
Use w (slower) and q (faster) to change the tempo
setting. Holding down either button changes the setting at
high speed.
• Pressing w and q at the same time will initialize the
tempo setting in accordance with the currently selected
rhythm.
• While the tempo value is flashing, you also can use br
(10-key) to change it.
• If you do not perform any operation for a few seconds
after the tempo setting screen appears, the display will
return to the screen displayed before you pressed 9.
Flashes
E-41
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Auto Accompaniment
Type
number
Using Auto Harmonize
Type Name
Description
Auto Harmonize automatically adds harmony to notes you
play with your right hand, which adds rich depth to the melody
of your performances. You can select from among 12 types of
Auto Harmonize to suit the type of music you are playing.
001
Duet 1
Adds close (separated by 2 to 4
degrees) 1-note harmony below
the melody note.
002
Duet 2
Adds open (separated by more
than 4 to 6 degrees) 1-note
harmony below the melody note.
• Auto Harmonize is controlled using the same button ct as
003
004
Country
Octave
Adds country style harmony.
the Arpeggiator (page E-56). Because of this, these two
functions cannot be used at the same time.
Adds the note from the next lower
octave.
1.
Press 8 to enable Auto Accompaniment with
005
006
5th
Adds the fifth degree note.
chords (ACCOMP indicator lit) (page E-38).
3-Way Open Adds 2-note open harmony, for a
total of three notes.
• Auto Harmonize cannot be used while FULL RANGE
CHORD is selected as the chord input mode. Select
another mode if you want to use Auto Harmonize.
007
008
009
010
3-Way Close Adds 2-note close harmony, for a
total of three notes.
2.
Hold down ct until the Auto Harmonize or
Strings
Adds harmony that is optimal for
strings.
Arpeggiator type number and type name appear
on the display.
• If you do not perform any operation for a few seconds,
the display will return to previous screen automatically.
4-Way Open Adds 3-note open harmony, for a
total of four notes.
4-Way Close Adds 3-note close harmony, for a
total of four notes.
Type number
Type name
011
012
Block
Adds block chord notes.
Big Band
Adds big band style harmony.
D u e t
1
4.
Press ct to turn on Auto Harmonize.
If you play chords with your left hand and the melody with
your right hand, harmony notes will be added to the
melody.
Use the br (10-key) [–] and [+] keys to select
3.
the Auto Harmonize type you want.
• Press ct again to turn off Auto Harmonize.
• 013 through 102 are Arpeggiator types (page E-56). Do
not select them when using the Auto Harmonize.
S t . G r P n o
D u e t
2
Lit when on
E-42
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Auto Accompaniment
3.
Use the br (10-key) [–] and [+] keys to select
Looking Up the Notes of Chords
(Chord Book)
the type of chord you want.
Selecting a chord type causes the chord to sound, and
shows the chord name and its notes on the display.
You can use the Chord Book to look up chords that you do not
know how to play.
Example: Selecting M (Major)
1.
Press bt.
Chord type
C h o r d B k
(
j
)
M
M a
o r
2. On the chord keyboard, press the keyboard key
that corresponds to the root note of the chord
you want to look up.
Chord name
Chord notes
Chord keyboard
• You can select any one of the following chord types.
M(Major), m(minor), dim, aug, sus4, sus2, 7th, m7,
b
b
M7, m7 5, 7 5, 7sus4, add9, madd9, mM7, dim7, 69,
6th, m6
• To display inverted forms of the chord, use br (10-key)
keys [0] through [4] as shown below.
To display this inverted form:
Normal form
Press this key:
Example: To look up C
0
1
2
3
4
First inversion
Second inversion
Third inversion
C h o r d B k
Fourth inversion
4. After you are finished looking up what you
Root note
want, press bt to exit the Chord Book.
• You can also exit the chord book by pressing bn
(SONG BANK), bo (RHYTHM), bp (TONE), or bq.
E-43
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing Auto Accompaniment Patterns
bo
br
ck
3 4 5 6 7 8
bl
You can use the procedure in this section to edit the Digital
Piano’s built-in Auto Accompaniment rhythm patterns and
create your own “user rhythms”.
• You can store up to 10 user rhythms in Digital Piano
memory, using rhythm numbers 201 through 210.
■ Editable Contents
• Rhythm number
• Part on/off
• Tone number
• Volume level
• Left-right speaker balance (panning)
• Reverb depth (reverb send)
• Chorus depth (chorus send)
■ Editable Accompaniment Patterns and
Instrument Parts
Any of the following parts that make up each rhythm that is
assigned a rhythm number can be edited.
Accompaniment patterns (intro, fill-in, etc.): 6 types
Instrument parts (drum, bass, etc.): 8 types
To edit and save an Auto Accompaniment
1. Select the number of the rhythm you want to
edit.
Accompaniment Pattern
2.
Press bl.
Instrument
Parts
Lights
Rhythm number
I
N
NF
V
VF
E
y
D r m : R h
.
1
2
3
4
5
6
7
8
Drum
I-1
I-2
I-3
I-4
I-5
I-6
I-7
I-8
N-1 NF-1 V-1 VF-1 E-1
N-2 NF-2 V-2 VF-2 E-2
N-3 NF-3 V-3 VF-3 E-3
N-4 NF-4 V-4 VF-4 E-4
N-5 NF-5 V-5 VF-5 E-5
N-6 NF-6 V-6 VF-6 E-6
N-7 NF-7 V-7 VF-7 E-7
N-8 NF-8 V-8 VF-8 E-8
8
Percussion
Bass
Chord 1
Chord 2
Chord 3
Chord 4
Chord 5
Button
Instrument part
Editable content
Accompaniment Pattern (Flashes)
If the “Err Mem Full” message appears on the display, see
page E-73 for information about what you should do.
3 4 4 5 5 6
E-44
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing Auto Accompaniment Patterns
3.
7.
Press a button from 3 to 6 to select the
Accompaniment Pattern you want to edit.
The name of the pattern will appear on the display.
To edit the other contents, press ck
(FUNCTION) to display the screen for the
setting you want.
• Each press of ck (FUNCTION) will cycle through the
settings shown below, from 1 through 6.
• Use the br (10-key) [–] and [+] keys to change the
currently selected setting.
• You can play the current settings of the editable part by
pressing 7.
y
D r m : R h
Setting Type
Display
Part
Settings
On/Off
1
2
3
Part on/off
5 Variation selected
Tone number*
Tone
Vol.
001 - 683
000 - 127
Volume level
Pattern selected by each button
3: Intro
Left-right speaker balance
(panning)
4
Pan
–64 - 0 - +63
4: Normal, Normal Fill-in
(Each press toggles the selection.)
5
6
Reverb depth (reverb send) Rvb
Chorus depth (chorus send) Cho.
000 - 127
000 - 127
5: Variation, Variation Fill-in
(Each press toggles the selection.)
6: Ending
* Instrument parts 1 and 2 can be assigned drum set tones
(built-in tones 684 to 700) only.
4.
Press 8 to select the instrument part you want
to edit.
8. Repeat steps 4 through 7 as many times as
necessary to edit the parts you want for the
pattern you selected in step 3.
The part number of the part you select will flash on the
display.
• If you change the rhythm number in step 6, the editable
contents (1 through 6 in the above table) you last
configured in step 7 of this procedure will be overwritten
with the settings of the newly selected rhythm.
Flashing: Part selected for editing.
9. Repeat steps 3 through 8 as many times as
necessary to edit the accompaniment patterns
you want (intro through ending).
Parts that contain data.
Part 6 (Chord 3)
5.
6.
Press bo (RHYTHM).
10.
Press bl.
This will display the rhythm name.
This will display a message asking if you want to save the
user rhythm.
Use the br (10-key) [–] and [+] keys to select
the rhythm number you want to assign to the
instrument part you are editing.
A different rhythm number is assigned for each instrument
part.
• You can play the data of the currently selected rhythm
number by pressing 7.
• All of the eight instrument parts of an intro (I-1 to I-8)
must have the same rhythm number. If you assign
rhythm 003 to I-1, for example, 003 also will be
assigned automatically to parts I-2 through I-8. If you
then assign rhythm 004 to part I-2, for example, I-1 and
all of the other parts also will change to 004. All of the
eight parts of an ending (E-1 to E-8) also must have the
same rhythm number.
E-45
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing Auto Accompaniment Patterns
11-1.
Press the br (10-key) [–] key to exit without
To delete saved data
saving.
The following procedure cannot be performed while an Auto
Accompaniment editing (rhythm edit) operation is in progress.
This displays the delete confirmation message.
Press the br (10-key) [+] key to exit the editing
procedure.
1.
Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
11-2.
Press the br (10-key) [+] key to save the data.
“DELETE” (page E-7).
Flashes
y
p
S n t h P o
D E L E T E
• Use br (10-key) [–] and [+] keys to select the rhythm
number you want to save.
Used memory (Unit: Kbytes)
• You can edit the user rhythm name. Use the br
(10-key) [4] (U) and [6] (I) keys to move the cursor to
the character you want to change, and then use [+] and
[–] to change the character.
Remaining memory capacity
2.
3.
Press the br (10-key) [9] (ENTER) key.
Press the br (10-key) [6] (I) key.
U s e 1
User rhythm name
4.
5.
Use the br (10-key) [–] and [+] keys to select
the user rhythm you want to delete.
12.
Press br (10-key) [9] (ENTER) key.
This will display a message asking if you want to save the
user rhythm.
Press the br (10-key) [9] (ENTER) key.
This displays a delete confirmation message.
• Press the br (10-key) [+] key to save the data.
• Press the br (10-key) [–] key to return to the screen
that was displayed before you pressed [9] (ENTER)
S u r e ?
key.
6.
Press the br (10-key) [+] (YES) key.
After the delete procedure is complete, “Complete” will
appear followed by the screen in step 2 of the above
procedure.
• If you select a user rhythm number that already
contains data, the existing data will be replaced by the
new data.
• To cancel the delete operation, press [–] (NO) or [7]
(EXIT) in place of [+] (YES).
• You cannot change the tone assigned to the keyboard
while an Auto Accompaniment editing (rhythm edit)
operation is in progress.
■ Saving User Rhythm Data on an External Device
• Memory card (page E-60)
• Computer (page E-67)
E-46
Download from Www.Somanuals.com. All Manuals Search And Download.
Saving Keyboard Setups to Registration Memory
bo
br
cl cm cn co cp cq
Registration memory lets you store Digital Piano setups (tone,
rhythm, etc.) for instant recall whenever you need them.
Registration memory simplifies performance of complex
pieces that require successive tone and rhythm changes.
■ Registration Save Example
This example saves the data shown in the table below to the
following setups in Bank 1.
• Initial melody setup saved to Setup 1-1.
• Second melody setup saved to Setup 1-2.
• Third melody setup saved to Setup 1-3.
You can have up to 32 setups in Registration memory at one
time. cl and cm to cp are used for recording.
Setup 1–1 Setup 1–2 Setup 1–3
Tone Number
Rhythm Number
Tempo
001
118
080
062
005
140
001
089
089
cl
cm
cn
co
cp
■ Registration Memory Data
The following is the complete list of data that is saved to a
registration memory setup.
• Tone numbers (main, layer, split)
• Rhythm number
• Tempo
• Auto Harmonize
• Transpose
• Split point
• Touch Response
• Octave shift
• Chord fingerings
• Accompaniment volume
• Arpeggiator setting (on, off, type)
• Synchro start
• Reverb (on, off, type)
• Chorus (on, off, type)
• Bend Range
• Accomp (on, off)
• Arpeggiator hold (on, off)
• Layer (on, off)
Area 1
Area 2
Area 3
Area 4
Bank 1
Bank 2
Setup 1-1 Setup 1-2 Setup 1-3 Setup 1-4
Setup 2-1 Setup 2-2 Setup 2-3 Setup 2-4
.
.
.
.
.
.
.
.
.
.
Bank 8
Setup 8-1 Setup 8-2 Setup 8-3 Setup 8-4
• Each press of bank select button cl cycles through the
bank numbers, from 1 to 8.
• Pressing a button from cm to cp selects the corresponding
area in the currently selected bank.
• Split (on, off)
• Pedal effect
B
E-47
Download from Www.Somanuals.com. All Manuals Search And Download.
Saving Keyboard Setups to Registration Memory
To save a setup to registration
memory
To recall a setup from registration
memory
1.
1.
Press cl to select the bank that contains the
Press bo (RHYTHM).
Bank number
setup you want to recall.
Bank 6
2. Configure the tone, rhythm, and other settings
you can to include in the setup.
2.
Use buttons cm to cp to select the area whose
setup you want to recall.
3.
Press cl to select the bank you want.
This will recall the registration memory setup and
automatically configure the Digital Piano settings
accordingly.
Each press of cl cycles through the bank numbers.
Bank 4
R e c a l l
Setup 6-1 recalled
• You also can select a bank by holding down cl as you
use the br (10-key) number buttons to enter a bank
• Notes currently being sounded by the keyboard may stop if
you recall a setup that causes a change in octave shift
(page E-17). To keep this from happening, either select a
setup that does not cause a change in the octave shift
setting, or hold down the pedal (which will cause notes
currently being played to be sustained).
number.
While holding down cq, press a button from cm
4.
to cp to select an area.
This will save the settings you configured in step 2 into the
applicable setup.
• If there is anything already stored in the setup, it will be
replaced (deleted) by the new setup.
■ Saving registration Data on an External Device
• Memory card (page E-60)
• Computer (page E-67)
S t o r e
Stored in Setup 4-1
E-48
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Your Keyboard Play
bn bo bp
br
7 8
bk
cl cm cn co cp cq
The recorder feature lets you record your keyboard play.
4. Configure the tone, rhythm, and other settings
you want to use.
Recording and Playing Back
Keyboard Play
Use the following procedure to record everything you play on
the keyboard.
5. Start playing.
Recording starts as soon as you play something on the
keyboard.
• You can use Auto Accompaniment while playing. If you do,
Auto Accompaniment also will be recorded.
1.
2.
Press bo (RHYTHM).
Press bk.
6.
To stop recording, press 7.
Lights
Lights
3.
Press bk again.
7.
To play back what you have recorded, press 7
This will enter record standby.
again.
Flashes
Each press of 7 starts and stops playback.
E-49
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Your Keyboard Play
8.
Press bk twice to exit the recorder mode.
Using Tracks to Record and Mix
Parts
Disappears
You can divide a song according to various types of parts
(instrument, left and right hand, etc.), and record each part to
a specific track. You can mix up to six tracks (the original track
plus five additional tracks) into a final song.
■ About tracks
Tracks are numbered from 1 to 6.
• If you do not specify a track number when recording,
recording is performed to Track 1 automatically.
• The flashing on the screen shown in step 3 becomes
faster when remaining recorder memory capacity
becomes less than 100 notes.
In addition to what you play on the keyboard, the following
information also is recorded.
• Track 1
• Total recorder memory capacity is approximately
12,000 notes. Recording will stop automatically when
there is no more unused recorder memory remaining.
Settings:
• Each press of bk cycles through the settings shown
Tone number, rhythm number, tempo, reverb, chorus,
chords, layer/split settings, Auto Harmonize/Arpeggiator
setting
below. You can listen to the recorded data as many
times as you like by pressing 7 while in playback
standby.
Operations:
Pedal, pitch bend wheel, INTRO button, SYNCHRO/
ENDING button, NORMAL/FILL-IN button, VARIATION/
FILL-IN button
Playback
Standby
Recorder Off
Record Standby
• Tracks 2 through 6
Tone number, pedal operation, pitch bend wheel operation
■ To delete recorded data
After step 3 of the above procedure, do hold down bk
To record to Tracks 1 through 6
(without pressing any keyboard key) until the message
“Tr.Del?” appears on the display. Press [+] (YES) to delete the
data, or [–] (NO) to cancel the delete operation.
1. Record the first part to Track 1.
To record to Track 1, perform steps 1 through 4 under
“Recording and Playing Back Keyboard Play” (page
E-49).
• Turning off the Digital Piano while recording is in
progress will cause any data in recorder memory to be
deleted.
Lights
• A new recording replaces (deletes) previously recorded
contents.
2.
Press bk.
This will enter record standby.
Flashes
E-50
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Your Keyboard Play
3.
7. After you finish recording all of the tracks,
Press a button from cmto cq to select the track
number of the next track to which you want to
press 7.
• This will start playback of the recorded tracks. Press
record.
7 to stop or restart playback.
This will enter record standby for the track you selected.
Example: Track 2
• At this time you can turn off playback of specific tracks
using buttons cl to cq. Pressing a key toggles
playback of each track on (track number displayed) or
Flashes
off (track number not displayed).
• If you want to re-record a track, press bk. This will
return to step 2 of the above procedure. Only the tracks
that are turned on (displayed) above will play as you
re-record.
Example: Tracks 2 and 3 selected
Disappears
• If you want to use a different tone than the one you
used in Track 1, press bp (TONE) and then use br
(10-key) to input the tone number.
4.
5.
Press 7.
This will start playback of what you recorded up to this
point in other tracks and record what you play on the
keyboard to the currently selected track. Play the notes
you want on the keyboard.
8.
Press bk twice to exit the recorder mode.
To stop recording, press 7.
Disappears
• To play back what you have recorded, press 7 again.
Each press of 7 starts and stops playback.
■ To delete a recorded track
After step 3 of the above procedure, do hold down bk
6. Repeat steps 2 through 5 to record the other
(without pressing any keyboard key) until the message
tracks.
“Tr.Del?” appears on the display. Press [+] (YES) to delete the
track, or [–] (NO) to cancel the delete operation.
E-51
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Your Keyboard Play
Recording Two or More Songs,
and Selecting One for Playback
Recording while Playing Along
with a Built-in Song
You can record up to five songs (numbered 1 through 5) in
memory. After that, you can select a specific song for
playback.
This section explains how to play along and record along with
one of the Digital Piano’s built-in songs.
● The following operations and settings also are
recorded along with your keyboard play.
Tone number, song number, pedal operation, tempo, reverb,
chorus, layer/split settings, pitch bend wheel operation
Press bo (RHYTHM).
1.
2.
Press bk.
A song number will appear in the upper left corner of the
display for a few seconds. While it is, use br (10-key) to
specify the number of the song you want to record or play
• There can be only one recording of keyboard play with a
built-in song in recorder memory. Making a new recording
replaces (deletes) previously recorded data.
back. The song number will disappear if you do not
perform any operation.
Example: Song 2
1.
2.
Press bn (SONG BANK).
Press bk.
This will enter playback standby.
y
P l a
N o .
Lights
3.
4.
Press bk to record, or 7 to play back.
To stop recording or playback, press 7.
Press bk twice to exit the recorder mode.
■ To delete recorded data
After step 2 of the above procedure, do hold down bk
(without pressing any keyboard key) until the message “Song
Del?” appears on the display. Press [+] (YES) to delete the
song, or [–] (NO) to cancel the delete operation.
3.
4.
Press bk again.
This will enter record standby.
Flashes
Use br (10-key) to enter the song number you
want to assign to the recording.
E-52
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Your Keyboard Play
5.
Press 8 to cycle through the parts in the
Saving Recorded Data on an
External Device
sequence shown below.
You can save data you record with the Digital Piano onto a
memory card or on your computer’s hard disk. In the case of a
memory card, you can save recorded song data as a standard
MIDI file (SMF 0 format).
Right-hand Recording
Left-hand Recording
Both-hand Recording
■ To save data to a memory card
See page E-60.
■ To save data on your computer’s hard disk
See page E-67.
Example: Left-hand part recording
Flashes
• Configure tone and tempo settings at this time as well.
6.
Press 7 to start built-in song playback and
recorder recording.
Play along with the playback.
• To stop recording part way through, press 7.
7. Recording will stop automatically when the end
of the built-in song is reached.
This will enter playback standby.
Lights
8.
9.
Press 7.
This will start playback of what you recorded.
• Each press of 7 starts and stops playback.
Press bk twice to exit the recorder mode.
■ To delete recorded data
After step 2 of the above procedure, do hold down bk until
the message “Song Del?” appears on the display. Press [+]
(YES) to delete the song.
E-53
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Useful Digital Piano Functions
bo bp
br
ck
cn co
ct
3.
Press br (10-key) [9] (ENTER) key.
Changing the Scale of the
Keyboard
You can use the following procedure to select from among 17
preset scales, including the standard Equal Temperament.
q
E u a l
No.
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
Scale name
Equal Temperament
Pure Major
Pure Minor
Pythagorean
Kirnberger 3
Werckmeister
Mean-Tone
Rast
Display
Scale Name
Equal
PureMajr
PureMinr
Pythagor
Kirnbrg3
Wercmeis
MeanTone
Rast
Use the br (10-key) [–] and [+] keys to select
4.
5.
the preset scale you want. After selecting a
scale, press the key on the keyboard that you
want to use as the root key (C to B).
After you are finished, press ck (FUNCTION) to
assign the scale to the keyboard.
Bayati
Bayati
Hijaz
Hijaz
Saba
Saba
Dashti
Dashti
Chahargah
Segah
Chaharga
Segah
Gurjari Todi
Chandrakauns
Charukeshi
GujrTodi
Cndrkuns
Carukesi
1.
2.
Press bo (RHYTHM).
Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
“SCALE” (page E-7).
Flashes
S C A L E
E-54
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Useful Digital Piano Functions
Using the Current Scale Notes for Auto
Accompaniments
Using Music Preset
Selecting a Music Preset instantly changes the Digital Piano
to a preset setup (tone, rhythm, tempo, etc.) for play of songs
of various genres/categories. The press of a button sets up
the Digital Piano so those songs sound exactly the way you
thought they should.
You can use the following procedure to reflect the preset
scale you selected in Auto Accompaniments.
1.
Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
• See the separate “Appendix” for a complete list of the 305
Music Presets that are available.
“
OTHER” (page E-7).
Flashes
1.
Hold down bp (TONE) until the indicator shown
below appears on the display.
Preset number
Preset name
O T H E R
2.
3.
Press br (10-key) [9] (ENTER) key.
I L o v e H e r
Use the br (10-key) [4] (U) and [6] (I) keys to
display “AcompScl”.
p
A c o m S c l
Lights
4.
Use the br (10-key) [+] key to select on.
2.
Use br (10-key) to select the preset number
you want.
This will change the setup (tone, rhythm, etc.) of the
Digital Piano.
• At this time the Digital Piano will go into Auto
Accompaniment synchro start standby (page E-41).
• Pressing bn (SONG BANK), bo (RHYTHM), or bp
(TONE) will return to the screen that was displayed
before you held down in step 1, above.
3. Play along on the keyboard with the
accompaniment.
E-55
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Useful Digital Piano Functions
Type
number
Using the Arpeggiator
Type Name
Description
The Arpeggiator makes it possible to play an arpeggio pattern
automatically. There are 90 different arpeggio patterns from
which to choose in order to match the music you are playing.
013-030 Up
Rising
Falling
031-048 Down
Repeat pattern alternating
between rising and falling
(Type A)
049-066 U/D A
• The Arpeggiator is controlled using the same button ct as
Auto Harmonize (page E-42). Because of this, these two
Repeat pattern alternating
between rising and falling
(Type B)
functions cannot be used at the same time.
067-084 U/D B
1.
Hold down ct until the Auto Harmonize or
Random arrangement of
notes of the pressed keys
Arpeggiator type number and type name appear
085-102 Random
on the display.
• If you do not perform any operation for a few seconds,
the display will return to the previous screen
automatically.
3.
Press ct to turn on Arpeggiator.
Playing a chord on the keyboard will start arpeggio play.
• Press ct again to turn off Arpeggiator.
Type number
Type name
S t . G r P n o
D u e t
1
2.
Use the br (10-key) [–] and [+] keys to select
Lit when on
the Arpeggiator type you want.
• 001 through 012 are Auto Harmonize types (page
E-42). Do not select them when using the Arpeggiator.
Octave
1... Uses the actual notes played.
2... Uses the actual notes played plus the same notes one octave.
4... Uses the actual notes played plus the same notes three octaves.
• The tempo setting of the Arpeggiator is the same as that set
for the metronome (page E-12).
Sustaining an Arpeggio (Arpeggiator Hold)
Use the following procedure when you want an arpeggio
pattern to keep playing after you release the keyboard keys.
p
1 U
1
Press ck (FUNCTION) and then use the br
1.
Speed (The number of arpeggio notes per beat)
(10-key) [4] (U) and [6] (I) keys to display
“OTHER” (page E-7).
2.
Press br (10-key) [9] (ENTER) key.
p g
A r e H l d
3.
Press the br (10-key) [+] key to select the ON
setting.
E-56
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Useful Digital Piano Functions
Deleting User Song Data
You can use the following procedure to delete user song data
Deleting All Data in Digital Piano
Memory
Use the following procedure when you want to delete sampled
sounds, user songs and all other data, except for recorded
songs, currently in Digital Piano memory.
stored as song numbers 153 through 162.
1.
Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
“DELETE” (page E-7).
• Performing this procedure also will delete protected
sampled sound data (page E-25). It is recommended
that you save important data to a memory card (page
E-58) or your computer’s hard disk (page E-64).
• This operation does not delete recorded song data.
Flashes
D E L E T E
Press ck (FUNCTION) and then use the br
1.
(10-key) [4] (U) and [6] (I) keys to display
Used memory
(Unit: Kbytes)
Remaining
memory capacity
“DELETE” (page E-7).
Flashes
2.
3.
Press the br (10-key) [9] (ENTER) key.
D E L E T E
Press the br (10-key) [6] (I) key twice.
Remaining
memory capacity
Used memory
(Unit: Kbytes)
U S E R S O N G
User song name
2.
3.
Press the br (10-key) [9] (ENTER) key.
4.
5.
Use the br (10-key) [–] and [+] keys to select
Use the br (10-key) [4] (U) and [6] (I) keys to
the user song you want to delete.
display “All Data”.
Flashes
Press the br (10-key) [9] (ENTER) key.
This displays a delete confirmation message.
A l l D a t a
S u r e ?
4.
5.
Press the br (10-key) [9] (ENTER) key.
6.
Press the br (10-key) [+] (YES) key.
After the delete procedure is complete, “Complete” will
appear followed by the screen in step 2 of the above
procedure.
• To cancel the delete operation, press [–] (NO) or [7]
(EXIT) in place of [+] (YES).
This displays a delete confirmation message.
S u r e ?
Press the br (10-key) [+] (YES) key.
After the delete procedure is complete, “Complete” will
appear followed by the screen in step 2 of the above
procedure.
• To cancel the delete operation, press [–] (NO) or [7]
(EXIT) in place of [+] (YES).
E-57
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a Memory Card
bq
br
ck
7
You can save Digital Piano user area data to a memory card
Memory Card and Card Slot
Precautions
and load data from a memory card to Digital Piano memory.
You also can play music files (MIDI files) stored on a memory
card on the Digital Piano.
• When using a memory card, make sure you observe all
of the precautions in the instructions that come with it.
• Memory cards have a write-protect switch that you can
use to protect against accidental deletion of data.
• Avoid using a memory card under the following
conditions. Such conditions can corrupt data stored on
the memory card.
• Use an SD memory card or an SDHC memory card with
a capacity of 32GB or less. Use of a memory card with a
capacity that is greater than 32GB and other types of
memory cards is not supported.
User data that can be saved and loaded
File Name
• Areas subjected to high temperature, high humidity,
and corrosive gas
Data Type
Description
Extension
• Areas subjected to strong electrostatic charge and
digital noise
Sampled sound
(page E-19)
TW7
Sampled sound data
DW7*1
• Never touch the contacts of a memory card when
loading it or removing it from the Digital Piano.
• While data is being stored to or recalled from a memory
card, never perform any other Digital Piano operation
or remove the memory card. Doing so can corrupt the
data on the card and damage the card slot.
• Never insert anything besides a memory card into the
card slot. Doing so creates the risk of malfunction.
• Electrostatic charge discharging from your fingers or
the memory card to the card slot can cause
malfunction of the Digital Piano. If this happens, turn
the Digital Piano off and then back on again.
• A memory card can become quite warm after very long
use in the memory card slot. This is normal and does
not indicate malfunction.
User rhythms
(page E-44)
Edited Auto
Accompaniment data
AC7
Song data imported from
an external device (cannot CM2
be saved to a memory
card).
User songs
(page E-29)
MID*2
Recorded songs
(page E-49)
SP7
Recorded song data
SL7*3
Registration
setups
(page E-47)
Tone and rhythm setup
settings
RM7
AL7
All data
Above data
*1: Sampled drum set sounds
*2: Standard MIDI file (format 0, 1)
*3: Data recorded playing along with built-in song
• Use only memory cards. Operation is not guaranteed
when any other type of memory card is used.
E-58
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a Memory Card
Inserting and Removing a
Memory Card
Formatting a Memory Card
• Before using a memory card, first be sure to format it
on the Digital Piano.
• Before performing the procedure below, check to make
sure that the memory card does not contain any data
you might need.
• The memory card format performed by the Digital
Piano is a “quick format”. If you want to completely
delete all of the data on the card, format it on your
computer or using some other device.
• Note that the memory card must be oriented correctly
when you insert it into the memory card slot. Trying to
force the memory card into the slot can damage the
card and the slot.
1. With the top of the memory card facing
upwards (so you can see it), carefully insert the
card into the Digital Piano’s memory card slot
1. Insert the memory card you want to format into
(dp) until stops with a click.
the Digital Piano’s card slot.
• Make sure that the write-protect switch of the memory
card is not in the write-protect position.
2.
3.
Press bq and ck (FUNCTION) at the same time.
Front
F o r m a t
2. Press the memory card into the card slot and
Press the br (10-key) [9] (ENTER) key.
then release it.
This will display the format confirmation screen.
This will cause the card to disengage and eject partially.
Pull the card out of the slot.
S u r e ?
4.
Press the br (10-key) [+] (YES) key.
The message “Pls wait” will appear on the display. Do not
perform any operation while this message is displayed.
“Complete” appears on the display after formatting is
complete.
• To cancel the format operation, press [–] (NO) or [7]
(EXIT) in place of [+] (YES).
P l s w a i t
p
C o m l e t e
E-59
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a Memory Card
4.
Use the br (10-key) [4] (U) and [6] (I) keys to
display one of the settings shown below.
• You also could use [–] and [+].
Saving Digital Piano Data to a
Memory Card
Use the following procedure to save Digital Piano data to a
memory card.
To save this data
Display this screen
“SAv” “SmplTone”
Sampled sound
User rhythm
1. On the Digital Piano, select the data you want to
“SAv” “UserRhy.”
“SAv” “Rec.Song”
save as described below.
Recorded song
To save this type
Do this
Recorded song
(SMF 0 format)
“SAv” “SMF 0”
of data
Sampled sound
Select the tone number of the sampled
sound you want to save.
Registration data
All data
“SAv” “Regist.”
“SAv” “All Data”
User rhythm
Select the rhythm number of the user
rhythm you want to save.
Saving a recording made while playing along with a built-in
song in SMF 0 format will save only what was played on the
keyboard.
Recorded song
Select the song you want to save and
put the Digital Piano in playback
standby.
Press the br (10-key) [9] (ENTER) key.
5.
Registration data
All data
Select one of the Digital Piano’s default
built in tones or rhythms.
• You cannot save a user song (song data loaded from
an external device) to a memory card.
• See page E-58 for information about data types.
U S E R N A M E
Flashes
2. Insert a memory card into the Digital Piano’s
• Enter the file name of the data you are saving. Use the
card slot.
br (10-key) [4] (U) and [6] (I) keys to move the cursor
to the character you want to change, and then use [+]
3.
Hold down bq until the screen shown below
and [–] to change the character.
• Pressing [7] (EXIT) will return to the screen that was
displayed before you pressed [9] (ENTER).
appears on the display.
• To cancel data save, press bq again.
6.
Press the br (10-key) [9] (ENTER) key.
This will save the data to the memory card.
p
C o m l e t e
• If there is a file with the same name already on the
memory card, a message will appear asking if you want
to overwrite it. Press the br (10-key) [+] (YES) key to
overwrite, or [–] (NO) or [7] (EXIT) to cancel.
p
R e
l a c e ?
E-60
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a Memory Card
Loading Data from a Memory
Card into Digital Piano Memory
• You can input the following characters in a file name.
Use the following procedure to load data from a memory card
into Digital Piano memory.
0
A
K
U
(
1
B
L
2
3
4
5
F
P
Z
}
6
G
Q
S
7
H
R
&
8
I
9
J
T
'
C
D
E
M N O
S
_
`
• Whenever you copy a file to the memory card that you
plan to recall on the Digital Piano, be sure to store the
file in the memory card’s “MUSICDAT” folder.
V W X
Y
{
)
-
^
@ ~
1. On the Digital Piano, select the data you want to
• The Digital Piano displays the “~” character as “3”.
■ Memory Card Data (File) Storage Locations
The above procedure stores Digital Piano data in a folder
named “MUSICDAT” on the memory card.
load as described below.
To load this type
Do this
of data
• The “MUSICDAT” folder is created automatically when you
format the memory card on the Digital Piano (page
E-59).
• If you store a file in any location other than inside the
“MUSICDAT” folder, you will not be able to recall, delete, or
play the file on the Digital Piano. You also will not be able to
recall, delete, or play any file you store inside of a subfolder
you create inside the “MUSICDAT” folder.
Sampled sound
User rhythm
User song
Select the tone number of the sampled
sound you want to load.
Select the rhythm number of the user
rhythm you want to load.
Select the song number of the song you
want to load.
Recorded song
Select the song you want to load and
put the Digital Piano in playback
standby.
• The message “No File” will appear on the display if you try
to perform a recall, delete, or play operation while there is
no file inside the “MUSICDAT” folder.
Registration data
All data
Select one of the Digital Piano’s default
built in tones, songs, rhythms, etc.
2. Insert the memory card that contains the data
into the Digital Piano’s card slot.
3.
Hold down bq until the screen shown below
appears on the display.
• To cancel data load, press bq again.
4.
Use the br (10-key) [4] (U) and [6] (I) keys to
display one of the settings shown below.
• You also could use [–] and [+].
To load this data
Display this screen
“Lod” “SmplTone”
Sampled sound
User rhythm
User song
“Lod” “UserRhy.”
“Lod” “UserSong”
“Lod” “Rec.Song”
“Lod” “Regist.”
Recorded song
Registration data
All data
“Lod” “All Data”
E-61
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a Memory Card
5.
Press the br (10-key) [9] (ENTER) key.
Deleting Data from a Memory
Card
Use the following procedure to delete data saved on a
memory card.
* * * * * * * *
1. On the Digital Piano, select the data you want to
Flashes
delete as described below.
• Pressing [7] (EXIT) will return to the screen that was
displayed before you pressed [9] (ENTER).
To delete this
Do this
type of data
6.
7.
Sampled sound
User rhythm
User song
Select the tone number of the sampled
sound.
Use the br (10-key) [–] and [+] keys to select
the data (file) you want to load.
Select the rhythm number of the user
rhythm.
Press the br (10-key) [9] (ENTER) key.
This will load the data into Digital Piano memory.
Select the song number of the user
song.
Recorded song
Select the song and put the Digital
Piano in playback standby.
p
C o m l e t e
Registration data
All data
Select one of the Digital Piano’s default
built in tones, songs.
• If there is already data stored in the user area where
you are trying to load data, an overwrite confirmation
2. Insert a memory card into the Digital Piano’s
message will appear. Press the br (10-key) [+] (YES)
key to overwrite, or [–] (NO) or [7] (EXIT) key to cancel.
card slot.
3.
Hold down bq until the screen shown below
appears on the display.
• To cancel data delete, press bq again.
p
R e
l a c e ?
4.
Use the br (10-key) [4] (U) and [6] (I) keys to
display one of the settings shown below.
• You also could use [–] and [+].
To delete this type
of data
Display this screen
“dEL” “SmplTone”
Sampled sound
User rhythm
User song
“dEL” “UserRhy.”
“dEL” “UserSong”
“dEL” “Rec.Song”
“dEL” “Regist.”
Recorded song
Registration data
All data
“dEL” “All Data”
E-62
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a Memory Card
5.
Press the br (10-key) [9] (ENTER) key.
Playing Back Data from a Memory
Card
You can use the following procedure to play back user song
data (page E-58) directly from a memory card.
* * * * * * * *
Flashes
• Whenever you copy a file to the memory card that you
plan to play on the Digital Piano, be sure to store the
file in the memory card’s “MUSICDAT” folder (page
E-61).
• Pressing [7] (EXIT) will return to the screen that was
displayed before you pressed [9] (ENTER).
Use the br (10-key) [–] and [+] keys to select
6.
7.
1. Insert the memory card that contains the data
the number of the data (file) you want to delete.
into the Digital Piano’s card slot.
Press the br (10-key) [9] (ENTER) key.
2.
Press bq.
This will display the delete confirmation screen.
This will display the file numbers and song names for the
data stored on the display.
3.
4.
Use br (10-key) to select the song you want to
S u r e ?
play.
Press 7.
Press the br (10-key) [+] (YES) key.
• To cancel the delete operation, press [–] (NO) or [7]
(EXIT) in place of [+] (YES).
8.
This will start playback.
• Each press of 7 starts and stops playback.
Memory Card Error Messages
For information about memory card error messages, see page
E-73.
p
C o m l e t e
E-63
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting External Devices
br
ck
8
Connecting the Digital Piano to Your
Computer
Connecting a Computer
You can connect the Digital Piano to a computer and
exchange MIDI data between them. You can send play data
from the Digital Piano to music software running on your
computer, or you can send MIDI data from your computer to
the Digital Piano for playback.
• Make sure you follow the steps of the procedure below
exactly. Connecting incorrectly can make data send
and receive impossible.
Minimum Computer System Requirements
1. Turn off the Digital Piano and then start up your
computer.
The following shows the minimum computer system
requirements for sending and receiving MIDI data. Check to
make sure that your computer complies with these
requirements before connecting the Digital Piano to it.
• Do not start up the music software on your computer
yet!
2. After starting up your computer, use a
commercially available USB cable to connect it
to the Digital Piano.
• Operating System
Windows® XP (SP2 or later) *1
Windows Vista® *2
Windows® 7 *3
B connector
Mac OS® X (10.3.9, 10.4.11, 10.5.8 or later, 10.6.6 or later)
USB cable
(A-B type)
*1: Windows XP Home Edition
Windows XP Professional (32-bit)
*2: Windows Vista (32-bit)
Digital Piano USB port
A connector
*3: Windows 7 (32-bit, 64-bit)
• USB port
Computer USB port
• Never connect to a computer that does not conform to
the above requirements. Doing so can cause problems
with your computer.
3. Turn on the Digital Piano.
• If this is the first time you are connecting the Digital
Piano to your computer, the driver software required to
send and receive data will be installed on your
computer automatically.
4. Start up your computer’s music software.
E-64
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting External Devices
5. Configure the music software settings to select
MIDI Settings
one of the following as the MIDI device.
CASIO USB-MIDI : (For Windows 7, Windows Vista,
Mac OS X)
USB Audio Device : (For Windows XP)
Keyboard Channel
A keyboard channel is the channel used for sending Digital
Piano data to a computer. You can select the channel you
want for sending Digital Piano data to a computer.
• The keyboard channel setting range is 01 to 16.
• For information about how to select the MIDI device,
see the user documentation that comes with the music
software you are using.
1.
Press ck (FUNCTION) and then use the br
• Be sure to turn on the Digital Piano first before starting
up your computer’s music software.
(10-key) [4] (U) and [6] (I) keys to display
“MIDI” (page E-7).
Flashes
• Once you are able to connect successfully, there is no
problem with leaving the USB cable connected when you
turn off your computer and/or Digital Piano.
• This Digital Piano conforms to General MIDI Level 1 (GM).
• For detailed specifications and connections that apply to
MIDI data send and receive by this Digital Piano, see the
latest support information provided by the website at the
following URL.
M I D I
Press br (10-key) [9] (ENTER) key.
2.
3.
y
K e b d C h
Use the br (10-key) [–] and [+] keys to change
the keyboard channel.
Navigate Channels
The navigate channels can be used to display only the notes
of a particular channel (part) as on-screen guide information
from among the note information of a tune sent from the
computer.
■ Specifying the Navigate Channels
From among the 16 available channels (numbered 1 to 16),
you can specify any two neighboring channels (such as 05
and 06) as navigate channels. The smaller numbered channel
is the navigate (L) channel, while the larger numbered
channel is the navigate (R) channel. Specifying the navigate
(R) channel will automatically configure the navigate (L)
channel as well.
1.
Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
“MIDI” (page E-7).
2.
3.
Press br (10-key) [9] (ENTER) key.
Use the br (10-key) [4] (U) and [6] (I) keys to
display “Navi. Ch”.
N a v i . C h
E-65
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting External Devices
4.
Use the br (10-key) to specify the navigate (R)
Local Control
channel.
There are times when exchanging data with a computer when
you may not want the Digital Piano to sound notes you play on
its keyboard. The local control setting lets you do just that.
This also will automatically configure the next lower
channel number as the navigate (L) channel.
■ Turning Off the Navigate Channel Sound and
Playing the Part on the Keyboard
You can turn off the sound on one or both of the navigate
channels and play the cancelled part on the keyboard
yourself.
1.
Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
“MIDI” (page E-7).
2.
3.
Press br (10-key) [9] (ENTER) key.
1.
Press 8 to select the channel setting you want
Use the br (10-key) [4] (U) and [6] (I) keys to
to turn off.
display “Local”.
Each press of 8 cycles through settings (1) through (4)
described below.
• If you turn off one channel, you can play the cancelled
part on the keyboard using the same tone as the
channel you turned off. If you turn off both channels
(option (3)), what you play on the keyboard sounds
using the tone of the navigate (R) channel.
L o c a l
Selected channel indicator appears.
4.
Use the br (10-key) [–] and [+] keys to specify
the local control setting.
Accomp Out
Enabling the Accomp Out setting causes Auto
Accompaniment data to be sent to the computer.
Navigate (L)
Channel
Navigate (R)
Channel
1.
Press ck (FUNCTION) and then use the br
(10-key) [4] (U) and [6] (I) keys to display
“MIDI” (page E-7).
On-
On-
Sound screen Sound screen
2.
3.
Press br (10-key) [9] (ENTER) key.
Guide
Guide
(1) R only displayed
{
×
×
×
{
×
{
×
Use the br (10-key) [4] (U) and [6] (I) keys to
(2) L only displayed
(3) LR displayed
{
{
{
display “AcompOut”.
×
{
{
(4) LR nor displayed
{
{
p
A c o m O u t
4.
Use the br (10-key) [–] and [+] keys to turn
Accomp Out on or off.
E-66
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting External Devices
Storing and Loading Digital Piano
Memory Data
• Since the accompaniment data is for other models, you
may experience some abnormalities when playing it on this
model.
• For information about accompaniment data compatibility
between models, see the Data Manager user’s guide you
download in step 5 of the above procedure.
You can transfer sampled sounds, recorded songs, and other
data in Digital Piano memory to a computer for storage. You
also can load standard MIDI file (SMF) data, and Auto
Accompaniment data you download from the CASIO website
to the Digital Piano, which greatly expands the Song Bank
songs and Auto Accompaniment patterns available to you.
A special Data Manager application is required in order to
transfer data to and from the Digital Piano.
Data Types Supported for Data Transfer
The same types of data that you can store to or recall from a
memory card (page E-58) can be transferred to and from the
Digital Piano. Note, that recorded song data can be
transferred to a computer in the Digital Piano’s native format
only. You cannot save recorded song data to a computer as a
standard MIDI file (SMF format).
Downloading Data Manager
1. Go to the CASIO WORLDWIDE site at the
following URL.
2. At the site, select a geographic area or country.
3. After accessing the area site, navigate to the
minimum computer system requirements for
Data Manager for this product.
• You should be able to find a link to Data Manager
information on the product introduction page of this
product. If you cannot find such a link, use the search
form of the area site where you are located to enter the
model name of this product and search for it.
• Note that site contents are subject to change without
notice.
4. Check if your computer system complies with
the minimum requirements for Data Manager.
5. Download Data Manager and its user’s guide to
your computer.
6. Follow the procedure in the user’s guide that
you downloaded in step 5 to install and use
Data Manager.
• You can download accompaniment data from the
Internet Data Expansion system of the CASIO MUSIC
memory of this Digital Piano. Note that there is not any
accompaniment data intended specifically for this
model, so you should use data for other models.
E-67
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting External Devices
Connecting to Audio Equipment
This Digital Piano can be connected to commercially available
stereo, amplifier, or recording equipment, to a portable audio
player or other equipment.
Outputting Digital Piano Notes to Audio
Equipment
Connection requires commercially available connecting cords,
supplied by you. The connecting cords should have a stereo
standard plug on one end and a plug that matches the
configuration of the external device on the other end.
• Turn off the external device when making connections.
After connecting, turn down the Digital Piano and
external device volume levels whenever turning power
on or off.
• After connecting, turn on the Digital Piano and then the
external device.
• If Digital Piano notes sound distorted when they are
sounded from external audio equipment, lower the
Digital Piano’s volume setting.
Stereo standard plug
Audio equipment, amplifier,
etc.
PHONES/OUTPUT jack
Playing an External Device from the Digital
Piano
Connection requires commercially available connecting cords,
supplied by you. The connecting cords should have a stereo
mini plug on one end and a plug that matches the
configuration of the external device on the other end.
• Turn off the Digital Piano when making connections.
After connecting, turn down the Digital Piano and
external device volume levels whenever turning power
on or off.
• After connecting, turn on the external device and then
the Digital Piano.
• If notes are distorted when they are sounded on the
external device, lower the volume setting of the
external device.
Stereo mini plug
Portable audio player, etc.
AUDIO IN jack
E-68
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Troubleshooting
Symptom
Action
Included Accessories
I can’t find something that should be here.
Power Requirements
Carefully check inside all of the packing materials.
Power will not turned on.
Correctly attach the AC adaptor (page E-9).
Press 2 firmly and completely to turn on power.
The display lights up momentarily but power does
not turn on when I press the POWER button (2).
Display
On-screen keyboard keys or notes remain on the
display.
A Step Up Lesson is in progress and the Digital Piano is waiting for
you to play the next note in the song. To stop this from happening,
cancel the lesson (page E-32).
Screen contents are visible only from straight ahead. This is dues to production limitations. It does not indicate malfunction.
Sound
Nothing happens when I press any keyboard key.
• Adjust the volume setting (page E-10).
• If there is no sampled sound in memory, nothing will play if you
press a keyboard key while a tone in the range of 701 to 705 is
selected (page E-19).
Nothing happens or notes do not play normally when
I play notes on the left side of the keyboard.
Press 8 to disable chord input in the accompaniment keyboard area
(page E-38).
Nothing happens when I start an Auto
Accompaniment.
• With rhythms 191 to 200, nothing will sound until you play a chord
on the keyboard. Try playing a chord (page E-38).
• Check and adjust the accompaniment volume setting (page E-41).
• If there is no user rhythm stored in memory, Auto Accompaniment
will not start when you press 7 while a rhythm in the range of 201
to 210 is selected (page E-44).
• Turn power off and then back on to initialize all Digital Piano
settings (page E-10).
Nothing happens when I start playback of a built-in
song.
• It takes a little time after you press the button until the song starts to
play. Wait for a moment for the song to start.
• Check and adjust the song volume (page E-28).
• If there is no user song stored in memory, song playback will not
start when you press 7 while a song in the range of 153 to 162 is
selected (page E-29).
• Turn power off and then back on to initialize all Digital Piano
settings (page E-10).
The metronome does not sound.
• Check and adjust the accompaniment volume setting (page E-41).
• Check and adjust the song volume (page E-28).
• Turn power off and then back on to initialize all Digital Piano
settings (page E-10).
Notes keep sounding, without stopping.
Turn power off and then back on to initialize all Digital Piano settings
(page E-10).
Some notes are cut off while they are playing.
Notes are cut off whenever the number of notes being sounded
exceeds the maximum polyphony value of 48 (24 for some tones).
This does not indicate malfunction.
The volume or tone setting I made has changed.
• Adjust the volume setting (page E-10).
• Turn power off and then back on to initialize all Digital Piano
settings (page E-10).
Output volume does not change even though is
change my keyboard touch.
• Change the Touch Response setting (page E-11).
• Turn power off and then back on to initialize all Digital Piano
settings (page E-10).
B
E-69
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Symptom
Action
In certain keyboard ranges, the volume and tone
quality sound are slightly different from those in other
keyboard ranges.
This is due to system limitations. It does not indicate malfunction.
With some tones, octaves do not change at the far
ends of the keyboard.
This is due to system limitations. It does not indicate malfunction.
The pitch of the notes does not match other
accompanying instruments or sounds strange when
played long with other instruments.
• Check and adjust the transpose (page E-16) and tuning settings
(page E-16).
• Turn power off and then back on to initialize all Digital Piano
settings (page E-10).
The reverb of notes seems to change suddenly.
• Check and adjust the reverb setting (page E-15).
• Turn power off and then back on to initialize all Digital Piano
settings (page E-10).
Operation
When I perform a skip forward or skip back
operation, the skip operation moves multiple song
measures instead of only a single measure.
While song playback is stopped or a Step Up Lesson is in progress,
skip forward and skip back operations are performed in phrase units
(page E-27).
Tone, rhythm, and other settings revert to their initial Though Digital Piano settings reset when you turn off the Digital
defaults whenever you turn on the Digital Piano.
Piano, you can save setups to registration memory for instant recall
whenever you need them (page E-47).
Computer Connection
I can’t exchange data between the Digital Piano and • Check to make sure that the USB cable is connected to the Digital
a computer.
Piano and computer, and that the device is selected correctly with
your computer’s music software settings (page E-64).
• Turn off the Digital Piano and then exit the music software on your
computer. Next, turn the Digital Piano back on and then restart the
music software on your computer.
E-70
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Specifications
Model
CDP-220RBK
Keyboard
88-key piano keyboard
3 types, Off
Touch Response
Maximum Polyphony
Tones
48 notes (24 for certain tones)
Built-in Tones
Sampling Tones
700
Up to 8 (Melody Sampling: 5, Drum Sampling: 3)*
Up to 10 seconds
Functions
Layer, Split, Piano/Organ button
1 to 10, Off
Reverb
Chorus
1 to 5, Off
Metronome
Beats per Measure
Tempo Range
Song Bank
0, 2 to 6
30 to 255
Built-in Songs
User Songs
152
Up to 10*
Step Up Lesson
Lessons
4 (Listen, Watch, Remember, Auto)
Lesson Part
L, R, LR
Functions
Repeat, Voice Fingering Guide, Note Guide, Performance Evaluation
20 notes
Music Challenge
Auto Accompaniment
Built-in Rhythms
User Rhythms
Chord Book Function
Registration
Recorder
200
Up to 10 (Accompaniment Edit)*
Chord Guide
32 (4 setups × 8 banks)
Real-time recording, playback
5 songs, 6 tracks
Keyboard Play
Playing Along with a
Built-in Songs
1 song (L, R, LR)
Memory Capacity
Other Functions
Transpose
Approximately 12,000 notes (total for 6 songs)
1 octaves (–12 to +12 semitones)
Octave Shift
Upper/Lower 2 octaves
Tuning
A4 = 415.5 to 465.9 Hz (Initial Default: 440.0 Hz)
Preset Scales
Music Preset
17
305
One Touch Preset
Auto Harmonize
Arpeggiator
200
12 types
90 types
MIDI
16 multi-timbre received, GM Level 1 standard
Musical Information Function
Tone, Rhythm, Song Bank numbers and names, staff notation, fingering, pedal operation,
tempo, measure and beat number, chord name, etc.
Pitch Bend Wheel
Pitch Bend Range
Memory Cards
0 to 12 semitones
Supported Memory Cards
Functions
SD or SDHC memory cards, 32GB or less
SMF playback, file storage, file recall, file delete, card format
E-71
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Inputs/Outputs
USB port
TYPE B
Sustain/Assignable jack
Phones/Output jack
Standard jack (sustain, sostenuto, soft, rhythm)
Stereo standard jack
Output Impedance: 3Ω, Output Voltage: 1.5V (RMS) MAX
Audio In jack
Stereo mini jack
Input Impedance: 40kΩ, Input Sensitivity: 200mV
Mic In/Sampling jack
Standard jack
Input Impedance: 3kΩ, Input Sensitivity: 10mV
Power Jack
Power Supply
AC Adaptor
Auto Power Off
Speakers
12V DC
AD-A12150LW
30 minutes after last key operation
(12cm × 6cm oval) × 2
8W + 8W
Output
Power Consumption
Dimensions
Weight
12V = 18W
1
1
1
132.2 × 28.6 × 12.9cm (52 /16 × 11 /4 × 5 /16 inch)
Approximately 12.0kg (26.4 lbs)
• Design and specifications are subject to change without notice.
* This data is stored in a shared memory area with a total capacity of approximately 320Kbytes (1Kbyte = 1,024bytes).
Operating Precautions
Be sure to read and observe the following operating precautions.
■ Location
Avoid the following locations for this product.
• Areas exposed to direct sunlight and high humidity
• Areas subjected to temperature extremes
• Near a radio, TV, video deck, or tuner
The above devices will not cause malfunction of the product, but interference from the product can cause audio or video
interference of a nearby device.
■ User Maintenance
• Never use benzine, alcohol, thinner, or other chemical agents to clean the product.
• To clean the product or its keyboard, wipe with a soft cloth moistened in a weak solution of water and a mild neutral detergent.
Wring all excess moisture from the cloth before wiping.
■ Included and Optional Accessories
Use only accessories that are specified for use with this product. Use of unauthorized accessories creates the risk of fire, electric
shock, and personal injury.
■ Weld Lines
Lines may be visible on the exterior of the product. These are “weld lines” that result from the plastic molding process. They are not
cracks or scratches.
■ Musical Instrument Etiquette
Always be aware of others around you whenever using this product. Be especially careful when playing late at night to keep the
volume at levels that do not disturb others. Other steps you can take when playing late at night are closing the window and using
headphones.
E-72
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Error Messages
Display
Message
Cause
Action
Err CardFull
There is not enough room available on the memory
card.
• Delete some of the files on the memory card to make
room for new data (page E-62).
• Use a different memory card.
Err Card R/W The memory card is damaged.
Use a different memory card.
Err Convert
There is not enough unused memory available to save Delete some or all of the following user data from memory
recorded song data to a memory card as an SMF 0
format file.
to make room for new data.
Sampled sounds (page E-18), user rhythms (page E-44),
user songs (page E-29)
Err Exist
A sampled drum set sound cannot be copied (page
E-23) to a keyboard key because the key already has a
sampled sound assigned to it.
• Delete the sampled sound that is currently assigned to
the key you are copying to (page E-23).
• Copy the sampled sound to another key that does not
yet have a sampled sound assigned to it.
Err Format
1. The format of the memory card is not compatible
with this Digital Piano.
1. Format the memory card (page E-59).
2. The memory card is damaged.
2. Use a different memory card.
3. You are trying to use an SDXC card.
3. SDXC cards are not supported. Use an SD or SDHC
memory card.
Err Limit
The tone number you selected before starting sampling • Delete the one or more of the sampled sounds
already has the allowable maximum of eight sampled
sounds assigned to it.
currently assigned to the tone number (page E-23).
• Select another tone number that has less than eight
sampled sounds currently assigned to it (page E-21).
Err Mem Full
1. There is not enough memory available to play back Delete some or all of the following user data from memory
song data from a memory card.
to make room for new data.
Sampled sounds (page E-18), user rhythms (page E-44),
user songs (page E-29)
2. There is not enough memory available for sampling
or Auto Accompaniment editing.
Err No Card
1. The memory card is not set correctly in the card slot. 1. Remove the memory card and reinsert it correctly
(page E-59).
2. The memory card was removed part way through a 2. Never remove a memory card from the card slot while
card access operation.
a card access operation is in progress.
Err No Data
Err No File
There is no data in the selected user area (tone,
rhythm, song number, etc.)
Select a Digital Piano user area that contains data.
There is no folder named “MUSICDAT” on the memory • Use a computer to create a folder named “MUSICDAT”
card.
on the memory card (page E-61).
• Format the memory card on the Digital Piano (page
E-59).
Err NotSMF01 You are attempting to play back SMF Format 2 song
Playback of SMF Format 0 or 1 only is supported.
data.
Err Protect
1. The memory card is write protected.
1. Adjust the memory card’s write protect switch to
enable data storage.
2. Sampled sounds (Tone Numbers 701 to 708) are
protected.
2. Unprotect one or more of the sampled sounds, which
will allow it to be overwritten or deleted.
Err ReadOnly You are attempting to save a file using the same name • Save the new file to a different card or use another
as an existing read-only file.
name.
• Remove the read-only attribute of the exiting file on the
memory card and try again.
• Use a different memory card.
Err SizeOver
1. The song data on the memory it too big to play back. 1. This Digital Piano can play back song data files with a
maximum size of about 320Kbytes.
2. Auto Accompaniment editing cannot be performed
because the accompaniment pattern or instrument
part data is too large.
2. Select a different accompaniment pattern or
instrument parts.
Err WrongDat 1. The data on the memory card is corrupted.
—
2. The data on the memory card is a type that is not
supported by this Digital Piano.
E-73
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Song List
SONG BANK
WORLD
056
057
058
059
060
061
062
063
064
065
066
067
068
069
070
071
072
073
074
075
076
077
078
AIR FROM “SUITE no.3”
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
016
017
018
019
020
021
022
023
024
025
026
027
028
TWINKLE TWINKLE LITTLE STAR
LIGHTLY ROW
LONG LONG AGO
ON TOP OF OLD SMOKEY
SAKURA SAKURA
WHEN THE SAINTS GO MARCHING IN
AMAZING GRACE
AULD LANG SYNE
SPRING FROM “THE FOUR SEASONS”
HABANERA FROM “CARMEN”
BRINDISI FROM “LA TRAVIATA”
HUNGARIAN DANCES no.5
MINUET IN G MAJOR
MUSETTE IN D MAJOR
GAVOTTE (GOSSEC)
ARABESQUE (BURGMÜLLER)
CHOPSTICKS
DECK THE HALL
COME BIRDS
DID YOU EVER SEE A LASSIE?
MICHAEL ROW THE BOAT ASHORE
DANNY BOY
MY BONNIE
HOME SWEET HOME
AURA LEE
HOME ON THE RANGE
ALOHA OE
SANTA LUCIA
FURUSATO
GREENSLEEVES
ODE TO JOY
AVE MARIA (GOUNOD)
SONATINA op.36 no.1 1st Mov.
PRELUDE op.28 no.7 (CHOPIN)
RÊVERIE
GYMNOPÉDIES no.1
GOING HOME FROM “FROM THE NEW WORLD”
FÜR ELISE
TURKISH MARCH (MOZART)
SONATA op.27 no.2 “MOONLIGHT” 1st Mov.
ETUDE op.10 no.3 “CHANSON DE L’ADIEU”
THE ENTERTAINER
JOSHUA FOUGHT THE BATTLE OF JERICHO
THE MUFFIN MAN
LONDON BRIDGE
WEDDING MARCH FROM “MIDSUMMER NIGHT’S
DREAM”
AMERICAN PATROL
FRÖHLICHER LANDMANN
LA CHEVALERESQUE
SONATA K.545 1st Mov.
079
UNDER THE SPREADING CHESTNUT TREE
SIPPIN’ CIDER THROUGH A STRAW
GRANDFATHER’S CLOCK
ANNIE LAURIE
BEAUTIFUL DREAMER
IF YOU’RE HAPPY AND YOU KNOW IT, CLAP YOUR
HANDS
MY DARLING CLEMENTINE
LITTLE BROWN JUG
HOUSE OF THE RISING SUN
SHE WORE A YELLOW RIBBON
YANKEE DOODLE
MY OLD KENTUCKY HOME
SZLA DZIEWECZKA
TROIKA
080
081
082
083
084
085
086
087
088
089
090
091
092
093
094
095
096
097
098
099
100
LA PRIÈRE D’UNE VIERGE
VALSE op.64 no.1 “PETIT CHIEN”
LIEBESTRÄUME no.3
JESUS BLEIBET MEINE FREUDE
CANON (PACHELBEL)
SERENADE FROM “EINE KLEINE NACHTMUSIK”
MARCH FROM “THE NUTCRACKER”
INVENTIONEN no.1
PRAELUDIUM no.1 (J.S.BACH)
SONATINE op.20 no.1 1st Mov.
HUMORESKE (DVO ÁK)
DOLLY’S DREAMING AND AWAKENING
LA FILLE AUX CHEVEUX DE LIN
ARABESQUE no.1 (DEBUSSY)
TRÄUMEREI
029
030
031
032
033
034
035
036
037
038
039
040
041
042
043
044
045
WALTZING MATILDA
ON THE BRIDGE OF AVIGNON
I’VE BEEN WORKING ON THE RAILROAD
OH! SUSANNA
CAMPTOWN RACES
JEANNIE WITH THE LIGHT BROWN HAIR
TURKEY IN THE STRAW
JAMAICA FAREWELL
MAPLE LEAF RAG
NOCTURNE op.9 no.2 (CHOPIN)
EXERCISE
EVENT
SILENT NIGHT
101 - 150 EXERCISE I / II / III
DEMO TUNES
046
047
048
049
050
WE WISH YOU A MERRY CHRISTMAS
JINGLE BELLS
JOY TO THE WORLD
151 - 152 DEMO TUNES
USER SONGS
153 - 162 USER SONGS
O CHRISTMAS TREE
PIANO/CLASSICS
051
052
053
054
055
MARY HAD A LITTLE LAMB
LE CYGNE FROM “LE CARNAVAL DES ANIMAUX”
JE TE VEUX
SONATA op.13 “PATHÉTIQUE” 2nd Mov.
HEIDENRÖSLEIN
E-74
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Fingered 3, Full Range Chords
Fingering Guide
In addition to the chords that can be fingered with Fingered 1
and Fingered 2, the following chords also are recognized.
Fingered 1, Fingered 2 Chords
#
b
b
#
C
D
C
E
C
F
C
G
C
A
B
B
C
C m Dm Fm
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
C
C
C
C
C
C
C
b
b
b
Gm ꢀ Am B m ꢀ Ddim A 7 F7 ꢀ Fm7 Gm7 ꢀ A add9
ꢀ
ꢀ
ꢀ
ꢀ
C
C
C
C
C
C
C
C
C
Cm
Cdim
Caug *3
Csus4 *3
Csus2 *3
C7
• With Fingered 3, the lowest note fingered is interpreted as
the base note. Inverted forms are not supported.
• With Full Range Chord, when the lowest note fingered is a
certain distance from the neighboring note, the chord is
interpreted as a fraction chord.
• Unlike Fingered 1, 2, and 3, Full Range Chord requires
pressing of at least three keys to form a chord.
Cm7 *3
CM7
Cm7b5 *3
C7b5 *3
C7sus4
Cadd9
Cmadd9
CmM7
Cdim7 *3
C69 *3
C6 *1 *3
Cm6 *2 *3
*1 With Fingered 2, interpreted as Am7.
b
*2 With Fingered 2, interpreted as Am7 5.
*3 Inverted form not supported in some cases.
E-75
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
This recycle mark indicates that the packaging conforms to
the environmental protection legislation in Germany.
Esta marca de reciclaje indica que el empaquetado se
ajusta a la legislación de protección ambiental en Alemania.
C
MA1107-B Printed in China
CDP220-ES-1B
Download from Www.Somanuals.com. All Manuals Search And Download.
|