CASSIOPEIA EG-800
Quick Start Guide
PN411454-001 MO0103-000505B Printed on recycled paper. Printed in Japan
• Perform the setup procedures to set up your CASSIOPEIA before doing anything else!
• Be sure to read the Safety Precautions contained in the Hardware Manual before using
your CASSIOPEIA.
Congratulations on your purchase of the CASSIOPEIA. This Quick Start Guide
will help you set up your Pocket PC and familiarize yourself with how it works.
• Keep this Guide in a safe place for future reference.
Battery lock
Getting Started
4
Perform a Full Reset (Memory Initialize).
1 While holding down the [Power] button, use the stylus to hold down the RESET button
RESET button
for about two seconds.
What’s in the Box?
• This causes the following message to appear on the display screen.
Check to make sure that all the items listed below are included.
Card lock switch
If the inserted card has a lock,
this switch locks the card in
place so it does not come out
accidentally.
“Proceeding with this operation initializes memory. Press [Action] to proceed or [Record] to
cancel.”
Stylus (inserted inside CASSIOPEIA)
2 Press the [Action] control.
•
•
•
Soft Case
• This causes the following message to appear on the display screen.
Microsoft® ActiveSync® CD-ROM
CASSIOPEIA CD-ROM
Main battery
(rechargeable battery pack)
CASSIOPEIA
Pocket PC
“Proceeding with this operation deletes all data stored in memory. Press [Action] to proceed
or [Record] to cancel.”
Stylus Operation
3 Press the [Action] control again.
• Tap.
Touch the screen once with the stylus to open items and select options.
• This starts the full reset operation, which deletes all data in memory.
• After a few moments the welcome screen appears.
• Drag.
Hold the stylus on the screen and drag across the screen to select text and images. Drag
in a list to select multiple items.
5
6
Follow the steps in the Welcome Wizard.
• Tap-and-hold.
The Pocket PC User’s Guide is included in digital form as PDF files on the CASSIOPEIA
CD-ROM. See the separate Using the CASSIOPEIA CD-ROM and Hardware Manual first.
Tap and hold the stylus on an item to see a list of actions available for that item. On the
pop-up menu that appears, tap the action you want to perform.
When finished, you’ll see the Today screen.
• See “Pocket PC Basics” at the back of Quick Start Guide for information about the Today
screen and other Pocket PC Basics.
• You also need to installActiveSync before you can communicate with a desktop computer.
Setting Up Your Pocket PC
General Guide
Important
• If the touch panel does not respond when you tap it or if nothing appears on the display,
try performing a full reset.
• If the message “A problem with memory contents has been found...” appears on the
display, perform a full reset.
• See the Hardware Manual for information on performing a full reset.
• See the Hardware Manual for important information about replacing batteries.
1
Load the main battery(rechargeable battery pack).
Charge indicator (Amber/Green)
Lights amber when the battery pack
is charging and turns green when
Be sure to use the AC Adapter to charge the rechargeable battery pack before doing
anything else.
full charge is achieved.
Indicator lamp (Red)
Alerts you to alarms
and warning.
1 Insert the bottom edge of the battery pack into the groove at the bottom of the battery
Power button
Turns power
on and off.
compartment, and then swing the top of the battery pack into place.
Adjusting Display Contrast
Microphone
Battery Lock
Card slot cover
To do this:
Perform this operation:
[Action] + Cursor up
[Action] + Cursor down
[Action] + Cursor right
[Action] + Cursor left
Start button
Make contrast darker
Make contrast lighter
Increase brightness
Decrease brightness
2
(Program button)
Press to display
the Start menu.
1
Stylus
Battery Pack
Touch screen
Action control
See “About the
[Action] Control”.
Perform operations and input
data by tapping and writing
directly on the screen.
2 Rotate the battery lock clockwise to secure the battery pack in place.
Installing ActiveSync to Communicate with
a Desktop Computer
Installing ActiveSync makes it possible for your CASSIOPEIA to communicate with a desktop
computer and perform the following tasks.
Record button
(Program button)
Voice memo recording is
activated as long as you
hold down this button.
Program buttons
Press to launch
the assigned
2
Use the AC Adapter to charge the battery pack.
• Connect the AC Adapter to the CASSIOPEIA as shown in the illustration.
Charge indicator
• Menu
(Launcher)
• Contacts
• Calendar
program. The
programs shown
here are the initial
default settings.
• Data synchronization for Calendar, Contacts, Tasks, Inbox, Channels, etc.
• Backup of CASSIOPEIA data
Jack cover
• Copying of files between the CASSIOPEIA and a desktop computer
See the ActiveSync online help for detailed information about how to perform these operations.
Stereo headphone jack
For connection of a
commercially available
earphone/headphones
(ø3.5mm).
Serial connector
For connection of the
CASSIOPEIA USB cable, or
the RS-232C serial cable.
Installing ActiveSync Using the Cradle
Speaker
1
After making sure your computer is turned off, connect the
cradle to the USB port of your computer.
Cursor button
Moves the cursor around
the screen.
AC adapter terminal
Serial connector cover
• Charging starts automatically as soon as you connect theAC adapter to the CASSIOPEIA.
• The charge indicator is amber while charging is in progress, and turns green when charging
is complete.
AC adapter terminal
AC adapter
Infrared port
• An M Type battery pack takes about five hours to reach full charge.
Charging the battery pack also charges the backup battery.
• The time required to reach full charge may be longer the first time you charge the battery
pack after purchasing it.
Cradle
About the [Action] Control
Operations can be performed by pressing and rotating the [Action] control.
USB port
Remove the AC Adapter from the CASSIOPIEA after charging is complete.
3
Press the [Power] button.
Pressing the [Action] control
performs an operation similar to the
Enter key of a computer keyboard.
Rotating the [Action] control
performs operations similar to the
up and down arrow keys of a
computer keyboard.
USB cable
2
3
Turn on your desktop computer and wait as Windows starts up.
See Pocket PC online help for information about using the [Action] control with each application. The
text in the online help indicates an [Action] control press operation as “Action,” and an [Action] control
rotate operation as “Up/Down control.”
Insert the ActiveSync CD-ROM into your computer’s CD-ROM
drive.
Download from Www.Somanuals.com. All Manuals Search And Download.
|