E
Digital Camera
EX-Z77
User’s Guide
Thank you for purchasing this CASIO product.
• Before using it, be sure to read the precautions
contained in this User’s Guide.
• Keep the User’s Guide in a safe place for future
reference.
• For the most up-to-date information about this
product, visit the official EXILIM
Website at http://www.exilim.com/
K828PCM2DMX
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Configuring Display Language, Date,
and Time Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 11
CONTENTS
Download from Www.Somanuals.com. All Manuals Search And Download.
3
■ Recording with Normal-speed Continuous Shutter,
Reducing the Effects of Hand
and Subject Movement . . . . . . . . . . . . . . . . . . . . .102
Shooting Images of Business Cards
and Documents (Business Shot) . . . . . . . . . . . . .105
Recording Snapshots into
a Multi-image Layout (Layout Shots). . . . . . . . . .112
Auto Tracking a Moving Subject
(Auto Framing) . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
and Flash Continuous Shutter
79
■ Performing a face recognition recording
■ Using the Family First Mode to Give Priority to
CONTENTS
Download from Www.Somanuals.com. All Manuals Search And Download.
4
■ Using Key Customize to Assign Functions
■ Displaying the Image You Just Recorded
■ Using Mode Memory to Configure Power
Reducing the Effects of Overexposure
and Underexposure. . . . . . . . . . . . . . . . . . . . . . . . 131
Using the On-screen Histogram to
■ Resetting the Camera to Its Initial
VIEWING SNAPSHOTS
Check Exposure. . . . . . . . . . . . . . . . . . . . . . . . . . . 136
CONTENTS
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Using Color Restoration to Correct
Combining Multiple Snapshots into
Adjusting White Balance of
a Recorded Image . . . . . . . . . . . . . . . . . . . . . . . . . 167
Creating a Snapshot of a Movie Frame
(MOTION PRINT) . . . . . . . . . . . . . . . . . . . . . . . . . . 174
CONTENTS
Download from Www.Somanuals.com. All Manuals Search And Download.
6
USING THE CAMERA
Specifying the File Name Serial Number
Using the Camera with
Generation Rule. . . . . . . . . . . . . . . . . . . . . . . . . . . 192
Changing the Camera Date
a Windows Computer . . . . . . . . . . . . . . . . . . . . . .212
■ Transfer of Images from the Camera and
Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199
■ Transfer of Images from the Camera and
Using DPOF to Specify Images to be Printed
and the Number of Copies . . . . . . . . . . . . . . . . . . 206
CONTENTS
Download from Www.Somanuals.com. All Manuals Search And Download.
7
CONTENTS
Download from Www.Somanuals.com. All Manuals Search And Download.
8
QUICK START BASICS
First, charge the battery
2. Plug the battery charger into a household
■ Using the Battery Charger to Charge
1. Load the battery into the battery charger.
power outlet.
[CHARGE] lamp lights red during charging.
[CHARGE] lamp goes out when charging is complete.
•
It takes about 90 minutes to achieve a full charge.
QUICK START BASICS
Download from Www.Somanuals.com. All Manuals Search And Download.
9
3. Close the battery cover.
■ Loading the Battery into the Camera
1. Open the battery cover.
1
2
While pressing lightly on the cover,
slide it in the direction indicated by
the arrow to open.
1
2
2. Load the battery into the camera.
Front (EXILIM logo)
Stopper
Battery
contacts
EXILIM
logo
Back
Front
QUICK START BASICS
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Configuring Display Language, Date, and Time Settings
1. Press [ON/OFF] to turn on the camera.
[ON/OFF] (Power)
2. Use [S], [T], [W], and [X] to select the
language you want and then press [SET].
3. Use [S], [T], [W], and [X] to select the area
where you will use the camera and then press
[SET].
[ꢀ]
[ꢂ]
[ꢁ]
4. Use [S] and [T] to select the city where you
[ꢃ]
will use the camera and then press [SET].
[SET]
[BS]
5. Use [S] and [T] to select the summer time
(DST) setting you want and then press [SET].
The settings on this page are required the first time you turn on
the camera after purchasing it.
• If you make a mistake when configuring the language, date,
197).
QUICK START BASICS
Download from Www.Somanuals.com. All Manuals Search And Download.
11
6. Use [S] and [T] to select the date format and then press [SET].
Example: December 19, 2007
To display the date like this:
Select this option:
YY/MM/DD
07/12/19
19/12/07
12/19/07
DD/MM/YY
MM/DD/YY
7. Set the date and the time.
Use [W] and [X] to select the setting you want (year, month, day, hour, minute) and then use [S] and [T] to change the setting.
To switch between 12-hour and 24-hour format, press [BS].
8. When settings are completed, press [SET].
9. Press [ON/OFF] to turn off the camera.
• After finishing this procedure, advance to the procedure on the next page.
QUICK START BASICS
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Using a Memory Card
2. Load a memory card into the camera.
■ Loading a Memory Card into the Camera
When a memory card is loaded, the camera stores images you
shoot on the card.
NOTE
• Though the camera has built-in memory, using a memory
MEMORY
card provides additional capacity you can use to store more
images, high-quality and large-size images, and longer
movies.
• The camera will store images in its built-in memory if there
is no memory card loaded. If you prefer to use built-in
Front
CARD
Front
Back
With the front of the memory card facing upwards (towards
the monitor screen side of the camera), slide it into the card
slot and press until it clicks securely into place.
• For information about memory card capacity, see page
3. Close the battery cover.
1. Open the battery cover.
1
While pressing lightly on the cover,
2
slide it in the direction indicated by
the arrow to open.
1
2
QUICK START BASICS
Download from Www.Somanuals.com. All Manuals Search And Download.
13
5. Press [S] to select “Format” and then press
■ Formatting a Memory Card
Before you can use a memory card with your camera, you must
[SET].
• To cancel formatting, select “Cancel” and then press
format it.
[SET].
IMPORTANT!
•
Wait until the “Busy... Please wait...” message disappears
from the monitor screen before doing anything else.
• Formatting a memory card that already has snapshots or
other files on it, will delete its contents. Normally you do not
need to format a memory card again. However, if storing to
a card has slowed down or if you notice any other
abnormality, re-format the card.
“Set Up” Tab
• Be sure to perform the following procedure on the camera
to format the memory card.
1. Press [ON/OFF] to turn on the camera.
2. Press [MENU].
[ON/OFF] (Power)
3. Use [W] and [X] to select the “Set Up” tab.
4. Use [T] to select “Format” and then press [X].
[MENU]
QUICK START BASICS
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Shooting a Snapshot
1. Press [
] to turn on the camera.
This enters the REC mode and displays “
Auto icon
” (Auto icon)
on the monitor screen.
Operation Lamp
2. Point the camera at the subject.
3. While taking care to keep the camera still, half-
press the shutter button.
Shutter Button
When the image is in focus, the camera will beep, the
operation lamp will light green, and the focus frame will turn
green.
4. Continuing to keep the camera still, press the
shutter button all the way down.
Focus Frame
The recorded image will remain on the display for about one
second, and then it will be stored in memory. After that, the
camera will be ready to shoot the next image.
Monitor Screen
[
] (REC)
QUICK START BASICS
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Snapshot Image Size and Image Quality
Your camera lets you select from among various image size
and quality settings. Note that image size and quality
settings affect how many images can be stored in memory.
• You can change the image size and quality settings as
required to shoot a smaller or lower-resolution image for
attachment to an e-mail message, for publishing on a
website, etc. You can also select an image size that suits
the size of paper you plan to use for printing your images.
How do I half-press the shutter button?
The shutter button is designed to stop about half way down
when you press it lightly. Stopping at this point is called a
“half-press”. When you half-press the shutter button, the
camera automatically adjusts exposure and focuses on the
subject it is currently pointed at.
Mastering how much pressure is required for a half-press
and a full-press of the shutter button is an important
technique for good-looking images.
Half-press
Full-press
Press lightly
until the
button stops.
All the way
Beep-beep!
Click!
QUICK START BASICS
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Viewing Snapshots
■ Fully pressing the shutter button without
waiting for Auto Focus
(page 144)
Fully pressing the shutter button without waiting for Auto
Quick Shutter lets you capture exactly the moment you want.
[
] (PLAY)
•
With Quick Shutter, the camera uses high-speed Auto
Focus, which means you can capture quick moving action
more easily. Note, however, that some images may be out
of focus when Quick Shutter is used.
•
Whenever possible, take a little extra time to half-press
the shutter button in order to ensure proper focus.
[W][X]
1. Press [
] to enter the PLAY mode.
If there are multiple images in memory, use [W] and [X] to
scroll through them.
■ To return to the REC mode
Press [
].
QUICK START BASICS
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Shooting a Movie
1. Press [
] to enter the REC mode.
Movie Icon
Remaining Recording Time
2. Press [BS] (BEST SHOT).
3. Use [S], [T], [W], and [X] to select the “
”
(Movie) scene and then press [SET].
[
] (REC)
“
” (movie icon) remains on the monitor screen.
4. Press the shutter button to start shooting the
movie.
Shutter Button
• Audio is also recorded during movie recording.
5. Press the shutter button again to stop
recording.
Recording Time
Movie Recording Screen
[BS]
QUICK START BASICS
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Movie Image Quality
Your camera lets you select from among six image quality
settings (UHQ, UHQ Wide, HQ, HQ Wide, Normal, LP) for
movies. To get the most out of the imaging capabilities of
your camera, use a quality setting of “HQ” (High Quality) or
“HQ Wide” or better.
Movie quality is a standard that determines the detail,
smoothness, and clarity of the image during playback.
Reducing image quality let’s you shoot longer, so you can
switch to “Normal”, or “LP” conserve remaining memory
capacity if you start to run low.
QUICK START BASICS
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Viewing a Movie
(page 146)
The film-like frame that appears on the monitor screen indicates
that this is an image from a movie.
1. Press [
] to enter the PLAY mode.
2. Use [W] and [X] to select the movie you want
to play.
“
” Movie icon
When scrolling through images, a movie is displayed on the
monitor screen by showing its first frame.
3. Press [SET] to start playback.
The monitor screen will return to the image selection screen
in step 2 after the end of the movie is reached.
• During movie playback, you can adjust volume, skip
forward and back, and perform other operations (page
147).
[
] (PLAY)
[SET]
■ To return to the REC mode
Press [
].
[W] [X]
QUICK START BASICS
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Deleting a File
You can use the following procedure to delete files you have
transferred to your computer’s hard disk, images you have
printed, or files you simply no longer need. This frees up
memory for recording more images.
1. Press [
].
2. Press [T] (
).
3. Use [W] and [X] to select the snapshot or
movie you want to delete.
[
] (PLAY)
[S]
4. Press [S] to select “Delete”.
• To cancel the delete operation, select “Cancel”.
5. Press [SET].
This deletes the selected snapshot or movie.
• If you want to delete more, repeat the above procedure
from step 3.
[SET]
• To quit the delete operation, press [MENU].
[W] [X]
[T] (
)
QUICK START BASICS
Download from Www.Somanuals.com. All Manuals Search And Download.
21
INTRODUCTION
■ Direct Mode Power On
Features
■ BEST SHOT for beautiful shots simply by
selecting a sample image built into the
camera
Simply select the scene that is
similar to what you want to shoot
(Night Scene Portrait, Flower,
etc.), for instant camera setups.
A dedicated [BS] button gives
you direct access to the BEST
SHOT library of sample scenes.
Example: Select for
beautiful
portraits.
To view images, press [
to power up in the PLAY
mode.
]
To record, press [
power up in the REC mode.
] to
■ A powerful collection of useful recording
features
• Hand movement and subject movement reduction using high
• High-sensitivity recording avoids dark images, even when the
• Quick Shutter, which helps you capture exactly the moment
INTRODUCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
22
■ Powerful Print Features
• DPOF feature for easy specification of date stamping and the
• Timestamp feature that stamps the date into the image data
(page 135)
• Support for PictBridge and USB DIRECT-PRINT for easy at-
home printing on a printer that supports one of these
Read this first!
■ LCD Panel
The liquid crystal panel of the monitor screen uses high-
precision technology that provides a pixel yield in excess of
99.99%.
This means that some pixels may not light or may remain lit at all
times. This is due to the characteristics of the liquid crystal
panel, and does not indicate malfunction.
INTRODUCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
23
• The SDHC Logo is a trademark.
■ Copyrights
• Microsoft, Windows, Internet Explorer, Windows Media,
Windows Vista, and DirectX are either registered trademarks
or trademarks of Microsoft Corporation in the United States
and/or other countries.
Except for your own personal enjoyment, unauthorized use of
snapshots or movies of images recorded with this camera
without the permission of the applicable right holder is forbidden
by copyright laws. In some cases, shooting of public
• Macintosh, Mac OS, QuickTime, QuickTime logo, and iPhoto
are trademarks of Apple Inc. in the United States and/or other
countries.
• MultiMediaCard is a trademark of Infineon Technologies AG
of Germany, and licensed to the MultiMediaCard Association
(MMCA).
• MMCplus is a trademark of the MultiMediaCard Association.
• Adobe and Reader are either registered trademarks or
trademarks of Adobe Systems Incorporated in the United
States and/or other countries.
• HOTALBUM and the HOT ALBUM logo are registered
trademarks or trademarks of Konica Minolta Photo Imaging,
Inc., and licensed to HOTALBUMcom, Inc.
performances, shows, exhibitions, etc. may be restricted
entirely, even if it is for your own personal enjoyment.
Regardless of whether such files are purchased by you or
obtained for free, posting them on a website, a file sharing site,
or any other Internet site, or otherwise distributing them to third
parties without the permission of the copyright holder is strictly
prohibited by copyright laws and international treaties.
Uploading or distributing on the Internet images of TV programs,
live concerts, music videos, etc. that were photographed or
recorded by you may infringe upon the rights of others. Note that
CASIO COMPUTER CO., LTD. shall not be held liable for any
use of this product that infringes on the copyrights of others or
that violates copyright laws.
• YouTube, the YouTube logo and “Broadcast Yourself” are
either registered trademarks or trademarks of YouTube, LLC.
• EXILIM, Photo Loader, Photo Transport, and YouTube
Uploader for CASIO are registered trademarks or trademarks
of CASIO COMPUTER CO., LTD.
The trademarks and registered trademarks shown below are
used in an editorial fashion in the explanatory text of this manual
without trademark ™ or registered trademark ® symbols. No
infringement on trademarks is intended.
INTRODUCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
24
• Photo Loader with HOT ALBUM was developed based on
HOT ALBUM, which is copyrighted by HOTALBUMcom, Inc.,
and Photo Loader, which is copyrighted by CASIO
COMPUTER CO., LTD. All copyrights and other rights revert
to original copyright holders.
• All other company or product names mentioned herein are
registered trademarks or trademarks of their respective
companies.
Any and all unauthorized commercial copying, distribution, and
copying of the bundled software over a network are prohibited.
This product contains PrKERNELv4
Real-time OS of eSOL Co., Ltd.
Copyright© 2007 eSOL Co., Ltd.
PrKERNELv4 is a registered
trademark of eSOL Co., Ltd. in Japan.
This product’s YouTube upload functionality is included under
license from YouTube, LLC. The presence of YouTube upload
functionality in this product is not an endorsement or
recommendation of the product by YouTube, LLC.
INTRODUCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
25
• Note that the example screens and product illustrations
shown in this manual may differ somewhat by the screens
and configuration of the actual camera.
• The contents of this manual are subject to change without
notice.
• The content of this manual has been checked at each step
of the production process. Please contact us if you notice
anything that is questionable, erroneous, etc.
• Any copying of the contents of this manual, either in part or
its entirety, is forbidden. Except for your own personal use,
and other use of the contents of this manual without the
permission of CASIO COMPUTER CO., LTD. is forbidden
under copyright laws.
• CASIO COMPUTER CO., LTD. shall not be held liable for
any damages or loss suffered by you or any third party due
to the use or malfunction of this product.
• CASIO COMPUTER CO., LTD. shall not be held liable for
any damages or loss suffered by you or any third party due
to the use of Photo Loader with HOT ALBUM, Photo
Transport, and/or YouTube Uploader for CASIO.
• CASIO COMPUTER CO., LTD. shall not be held liable for
any damages or loss caused by deletion of memory contents
due to malfunction, repair, or any other reason.
INTRODUCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
26
■ Directly Viewing the Sun or Bright Light
• Never look at the sun or any other bright light through the
cameras viewfinder. Doing so can damage your eyesight.
Precautions during Use
■ Take test shots before shooting the final
shot.
■ Flash
• Before shooting your final image, shoot a test shot to ensure
• Never use the flash unit in areas where flammable or
explosive gas may be present. Such conditions create the risk
of fire and explosion.
• Never fire the flash in the direction of a person operating a
motor vehicle. Doing so can interfere with the driver’s vision
and creates the risk of accident.
that the camera is recording correctly.
■ Avoid Use While In Motion
• Never use the camera to record or play back images while
operating an automobile or other vehicle, or while walking.
Looking at the monitor while in motion creates the risk of
serious accident.
• Never fire the flash too close to the eyes of the subject. Doing
so creates the risk of loss of eyesight.
INTRODUCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
27
■ Display Panel
■ Transport
• Do not apply strong pressure to the LCD panel surface or
subject it to strong impact. Doing so can cause the display
panel glass to crack.
• Never operate the camera inside of an aircraft or anywhere
else where operation of such devices is restricted. Improper
use creates the risk of serious accident.
• Should the display panel ever become cracked, never touch
any of the liquid inside the panel. Doing so creates the risk of
skin inflammation.
■ Smoke, abnormal odor, overheating, and
other abnormalities
• Should display panel liquid ever get into your mouth,
immediately rinse your mouth out and contact your physician.
• Should display panel liquid ever get into your eyes or onto
your skin, immediately rinse with clean water for at least 15
minutes and contact your physician.
• Continued use of the camera while it is emitting smoke or
strange odor, or while it is overheating creates the risk of fire
and electric shock. Immediately perform the following steps
whenever any of the above symptoms are present.
1. Turn off the camera.
2. Remove the battery from the camera, taking care to
protect yourself against burn injury.
■ Connections
• Never plug any devices that are not specified for use with this
camera into connectors. Connecting a non-specified device
creates the risk of fire and electric shock.
3. Contact your dealer or nearest CASIO authorized service
center.
INTRODUCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
28
■ Water and Foreign Matter
■ Dropping and Rough Treatment
•
Water, other liquids, or foreign matter (especially metal)
getting inside the camera creates the risk of fire and electric
shock. Immediately perform the following steps whenever any
of the above symptoms are present. Particular care is
required when using the camera where it is raining or
snowing, near the ocean or other body of water, or in a
bathroom.
• Continued use of the camera after it is damaged by dropping
or other rough treatment creates the risk of fire and electric
shock. Immediately perform the following steps whenever any
of the above symptoms are present.
1. Turn off the camera.
2. Remove the battery from the camera.
3. Contact your dealer or nearest CASIO authorized service
center.
1. Turn off the camera.
2. Remove the battery from the camera.
3. Contact your dealer or nearest CASIO authorized service
center.
■ Keep Away From Fire
• Never expose the camera to fire, which can cause it to
explode and creates the risk of fire and electric shock.
INTRODUCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
29
■ Disassembly and Modification
■ Backing Up Important Data
• Never try to take the camera apart or modify it in any way.
Doing so creates the risk of electric shock, burn injury, and
other personal injury. Be sure to leave all internal inspection,
maintenance, and repair up to your dealer or nearest CASIO
authorized service center.
• Always keep backup copies of important data in camera
memory by transferring it to a computer or other storage
device. Note that data can be deleted in the case of camera
malfunction, repair, etc.
■ Memory Protection
■ Locations To Be Avoided
•
Whenever replacing the battery, be sure to follow the correct
procedure as described in the documentation that comes with
the camera. Incorrectly replacing the battery can result in
corruption or loss of data in camera memory.
• Never leave the camera in any of the following types of
locations. Doing so creates the risk of fire and electric shock.
– Areas subject to large amounts of humidity or dust
– Food preparation areas or other locations where oil smoke
is present
– Near heaters, on a heated carpet, in areas exposed to
direct sunlight, in a closed vehicle parked in the sun, or
other areas subject to very high temperatures
• Never place the camera on an unstable surface, on a high
shelf, etc. Doing so can cause the camera to fall, creating the
risk of personal injury.
INTRODUCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
30
• Should you ever notice leakage, strange odor, heat
generation, discoloration, deformation, or any other abnormal
condition while using, charging, or storing a battery,
immediately remove it from the camera or charger unit and
keep it away from open flame.
■ Rechargeable Battery
• Use only the specified charger unit or the specified device to
charge the battery. Attempting to charge the battery by an
unauthorized means creates the risk of battery overheating,
fire, and explosion.
• Do not use or leave the battery under direct sunlight, in an
automobile parked in the sun, or in any other area subject to
high temperatures. Doing so can damage the battery, and
cause deterioration of its performance and loss of service life.
• If the battery charging does not end normally within the
specified charging time, stop charging anyway and contact
your local CASIO authorized service center. Continued
charging creates the risk of battery overheating, fire, and
explosion.
• Battery fluid can damage your eyes. Should battery fluid get
into your eyes accidentally, immediately rinse them with clean
tap water and then consult a physician.
• Be sure to read the user documentation that comes with the
camera and special charger unit before using or charging the
battery.
• Do not expose or immerse the battery in fresh water or salt
water. Doing so can damage the battery, and cause
deterioration of its performance and loss of service life.
• This battery is intended for use with a CASIO Digital Camera
only. Use with any other device creates the risk of the battery
damage, or deterioration of battery performance and service
life.
• Failure to observe any of the following precautions creates
the risk of battery overheating, fire, and explosion.
– Never use or leave the battery near open flame.
– Do not expose batteries to heat or fire.
– Make sure the battery is oriented correctly when it is
connected to the charger unit.
– Never carry or store the battery together with items that can
conduct electricity (necklaces, pencil lead, etc.)
– Never disassemble the battery, pierce it with a needle, or
expose it to strong impact (hit it with a hammer, step on it,
etc.), and never apply solder to it. Never place the battery
into a microwave oven, heater, high-pressure generating
device, etc.
INTRODUCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
31
• If a battery is to be used by young children, make sure that a
responsible adult makes them aware of the precautions and
proper handling instructions, and make sure that they handle
battery correctly.
• Should fluid from a battery accidentally get onto clothing or
your skin, immediately rinse it off with clean tap water.
Prolonged contact with battery fluid can cause skin irritation.
■ Battery Life
• Battery continuous operation times provided in this manual
represent the approximate amount of time before the camera
turns off due to low battery power when being powered by the
special battery under normal temperature (23°C (73°F)). They
do not guarantee that you will be able to achieve the indicated
level of operation. Actual battery life is greatly affected by
ambient temperature, battery storage conditions, the amount
of time spent in storage, etc.
• Leaving the camera on can run down battery and cause the
low battery warning to appear. Turn off the camera whenever
you are not using it.
• The low battery warning indicates that the camera is about to
turn off due to low battery power. Charge the battery as soon
as possible. Leaving low or dead batteries in the camera can
lead to battery leakage and data corruption.
INTRODUCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
32
■ Data Error Precautions
■ Operating Environment
• Your digital camera is manufactured using precision digital
components. Any of the following creates the risk of
corruption of data in camera memory.
– Removing the battery or memory card from the camera
while the camera is performing an operation
– Removing the memory card from the camera while the
operation lamp is flashing green after turning off the
camera
• The operating temperature range of the camera is 0°C to
40°C (32°F to 104°F).
• Do not place the camera in any of the following locations.
– In an area exposed to direct sunlight, or large amounts of
moisture or dust
– Near an air conditioner or in other areas subjected to
extreme temperature or humidity
– Inside of a motor vehicle on a hot day, or in an area
subjected to strong vibration
– Disconnecting the USB cable while a data communication
operation is being performed
– Using a battery that is low
– Other abnormal operations
Any of the above conditions can cause an error message to
indicated by the message that appears.
INTRODUCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
33
■ Condensation
■ Power Supply
• Sudden and extreme temperature changes, such as when the
camera is moved from the outdoors on a cold winter day into
a warm room, can cause water droplets called “condensation”
to form on the interior and the exterior of the camera. Note
that condensation can cause malfunction of the camera. To
avoid condensation, place the camera into a plastic bag
before subjecting it to sudden temperature change. Wait until
the air in the bag has had enough time to become acclimated
to the new temperature before removing the camera. After
that, open the battery cover and leave it open for a few hours.
• Use only the special rechargeable lithium ion battery (NP-20)
to power this camera. Use of any other type of battery is not
supported.
• The camera does not have a separate battery for the clock.
The date and time settings of the camera are cleared about
two days after power is cut off from the battery. If this
happens, be sure to reconfigure these settings after power is
■ Lens
• Never apply too much force when cleaning the surface of the
lens. Doing so can scratch the lens surface and cause
malfunction.
• You may sometimes notice some distortion in certain types of
images, such as a slight bend in lines that should be straight.
This is due to the characteristics of lens, and does not
indicate malfunction of the camera.
INTRODUCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
34
■ Caring for your camera
■ Other Precautions
• Fingerprints, dirt, and other foreign matter on the lens surface
can interfere with proper operation of the camera. Avoid
touching the lens surface. To clean the lens surface, use a
blower to blow off dust or foreign matter and then wipe with a
soft, dry cloth.
• The camera becomes slightly warm during use. This is normal
and does not indicate malfunction.
• Fingerprints, dirt, and other foreign matter on the flash can
interfere with proper operation of the camera. Avoid touching
the flash. If the flash becomes dirty, wipe it clean with a soft,
dry cloth.
• To clean the camera, wipe it with a soft, dry cloth.
■ Monitor Screen Images
• The images that normally appear on the monitor screen
during image playback are smaller than normal, and so you
cannot see all of the detail of the actual image. Your camera
enlarge the monitor screen image. You can use this feature
for on-the-spot checks of important images.
INTRODUCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
35
GETTING READY
To charge the battery
Charging the Battery
Your camera is powered by a rechargeable lithium ion battery
(NP-20).
1. Correctly positioning the positive and
negative terminals of the battery, load the
battery into the battery charger.
IMPORTANT!
• Use of any type of battery other than NP-20 is not
supported.
The battery is not fully charged when you use the camera for
the first time after purchasing it. You need to charge the
battery before using the camera for the first time.
• Making sure that the positive and negative contacts are
aligned correctly, load the battery into the battery charger.
Note that the battery will not charge properly if it is not
positioned correctly in the battery charger.
GETTING READY
Download from Www.Somanuals.com. All Manuals Search And Download.
36
If the [CHARGE] lamp does not light red
2. Plug the battery charger into a household
power outlet.
Charging cannot be performed because ambient temperature or
temperature of the charger is too hot or too cold. Wait until the
camera returns to normal temperature. When the camera
returns to a temperature where charging can be performed, the
[CHARGE] lamp will light red.
This will cause the [CHARGE] lamp to turn red.
• It takes about 90 minutes to achieve a full charge. Actual
charging time depends on current battery capacity,
remaining power, and charging conditions.
If the [CHARGE] lamp flashes red
The battery is faulty or the battery is loaded in the charger
incorrectly. Remove the battery from the charger and check if its
contacts are dirty. If they are, wipe them off with dry cloth and
then reload the battery into the charger. When experiencing
charging problems, also check to make sure that the power cord
is not disconnected from the power outlet or charger.
[CHARGE] lamp
If an error still continues to occur after you perform the above
steps, it could mean that the battery is faulty. Contact your
nearest CASIO authorized service center.
When charging is complete
The [CHARGE] lamp will go out. Unplug the power cord from the
power outlet and then remove the battery from the charger.
GETTING READY
Download from Www.Somanuals.com. All Manuals Search And Download.
37
To load the battery
IMPORTANT!
• Use the special charger (BC-11L) to charge the special
lithium ion battery (NP-20). Never use any other type of
charger device. Attempting to use a different charger can
result in unexpected accident.
1. Open the battery cover.
While pressing the battery cover, slide it in the direction
indicated by the arrow.
• Charging the battery while it is still warm immediately after
removing it from the camera can result in only partial
charging. Give the battery time to cool before charging it.
• Battery discharges slightly even when it is left without
loading it into the camera. Because of this, it is
recommended that you charge the battery immediately
before you need to use it.
• Charging the battery may cause interference with TV and
radio reception. If this happens, plug the charger into an
outlet that is further away from the TV or radio.
GETTING READY
Download from Www.Somanuals.com. All Manuals Search And Download.
38
2. Load the battery into the camera.
With the EXILIM logo on the battery facing upwards (in the
direction of the monitor screen), hold the stopper in the
direction indicated by the arrow as you slide the battery into
the camera. Press the battery in until the stopper secures it
in place.
■ Battery Life and Number of Images between
Charges
■ Battery Power Conservation Tips
•
When you do not need to use the flash, select “
” (flash off)
• Enable the Auto Power Off and the Sleep features to protect
against wasting battery power when you forget to turn off the
NP-20
Stopper
3. Close the battery cover.
Swing the battery cover closed, and then slide it securely
into place as you press it against the camera.
GETTING READY
Download from Www.Somanuals.com. All Manuals Search And Download.
39
■ Checking Remaining Battery Power
As battery power is consumed, a battery indicator on the monitor
IMPORTANT!
• Due to differences in the power requirements of each
mode, the battery indicator may show a lower level in the
PLAY mode than what it shows in the REC mode. This is
normal, and does not indicate malfunction.
• Leaving the camera for about two days with no power
supplied while the battery is dead will cause its date and
time settings to be cleared. You will have to re-configure
the settings after power is restored.
screen indicates remaining power as shown below.
Remaining
Power
High
Low
Battery
Indicator
Indicator
Color
Light
blue
Orange
Red
Red
“
” indicates that battery power is low. Charge the battery as
soon as possible.
Recording is not possible when “
battery immediately.
” is indicated. Charge the
GETTING READY
Download from Www.Somanuals.com. All Manuals Search And Download.
40
Replacing the Battery
Battery Precautions
1. Open the battery cover.
■ Precautions during Use
• Operation provided by a battery under cold conditions is
always less than operation under normal temperatures. This
is due to the characteristics of the battery, not the camera.
• Charge the battery in an area where the temperature is within
the range of 5°C to 35°C (41°F to 95°F). Charging outside this
temperature range can cause charging to take longer than
normal or even cause charging to fail.
2. With the camera oriented with its monitor
screen facing upwards as shown in the
illustration, slide the stopper in the direction
indicated by the arrow and hold it there.
• This will cause the battery to come out part way.
Stopper
• If a battery provides only very limited operation following a full
charge, it probably means that the battery has reached the
end of its service life. Replace the battery with a new one.
3. While still holding the stopper, pull the battery
out the rest of the way.
4. Load a new battery.
GETTING READY
Download from Www.Somanuals.com. All Manuals Search And Download.
41
■ Storage Precautions
Using the Camera in another Country
• Though a rechargeable lithium ion battery provides high
capacity in a compact configuration, long-term storage while
charged can cause it to deteriorate.
– If you do not plan to use a battery for some time, fully use
up its charge before storing it.
– Always remove the battery from the camera when you are
not using it. Leaving a battery in the camera can cause it to
discharge and go dead, which will require longer charging
when you need to use the camera.
Note the following precautions.
• The bundled battery charger is designed for operation with
any power supply in the range of 100V to 240V AC, 50/60Hz.
Note, however, that the shape of the power cord plug
depends on each country or geographic area. Before taking
the camera and charger along on a trip, check with travel
agent about the power supply requirements in your
destination(s).
• Do not connect the battery charger to a power supply through
a voltage converter or similar device. Doing so can lead to
malfunction.
– Store batteries in a cool, dry place (20°C (68°F) or lower).
■ Extra Batteries
Taking along extra fully charged batteries (NP-20) is
recommended while on a trip in order to avoid not being able to
shoot images due to the battery going dead.
GETTING READY
Download from Www.Somanuals.com. All Manuals Search And Download.
42
IMPORTANT!
Turning Power On and Off
• Pressing [ON/OFF] or [
] (REC) to turn on power also
■ Turning Power On
causes the lens to extend. Take care there is nothing
pressing against or hitting the lens. Holding the lens with
your hand so it cannot extend creates the risk of
malfunction.
To turn power on and enter the REC mode
Press [ON/OFF] (Power) or [
] (REC).
To turn power on and enter the PLAY mode
Press [ ] (PLAY).
NOTE
• Pressing [
] (PLAY) while in the REC mode switches to
the PLAY mode. The lens retracts about 10 seconds after
switching modes.
you do not perform any operation for a preset amount of
time. If this happens, turn power back on.
Pressing a button causes the operation lamp to light green
momentarily and turns on power.
Operation Lamp
[ON/OFF] (Power)
[
] (REC)
[
] (PLAY)
GETTING READY
Download from Www.Somanuals.com. All Manuals Search And Download.
43
■ Turning Power Off
■ Battery Power Conservation Features
Press [ON/OFF] (Power).
This camera is equipped with a sleep function and auto power
off function to conserve battery power. You can configure these
settings in the REC mode as described below.
NOTE
• You can configure the camera so power does not turn on
Feature
Name
when you press [
also configure the camera to turn off when you press [
] (REC) or [
] (PLAY). You can
Description
Settings
]
The monitor screen turns off (goes
into a sleep state) if no operation is
performed for a preset amount of
time. Press any button to turn the
monitor screen back on.
30 sec
1 min
2 min
Off
Sleep
Turning On Power for the First Time
The first time you load a battery into the camera, a screen
appears for configuring screen text language, date, and time
the settings correctly.
Power turns off if no operation is
performed for a preset amount of
time.
1 min
2 min
5 min
Auto Power
Off
• Sleep and Auto Power Off always operate as described below
in the PLAY mode, regardless of their current PLAY mode
settings.
– Sleep does not function in the PLAY mode.
– The Auto Power Off trigger time is always five minutes.
IMPORTANT!
• Failure to set the date and time will cause the wrong
date and time data to be recorded with images.
• If you make a mistake when configuring the language,
date, and time settings, you can change the settings
1. Press [MENU].
2. Use [W] and [X] to select the “Set Up” tab.
GETTING READY
Download from Www.Somanuals.com. All Manuals Search And Download.
44
3. Use [S] and [T] to select the item you want to
configure (“Sleep” or “Auto Power Off”) and
then press [X].
Using a Memory Card
You can store images you shoot with the camera on a memory
card. It is up to you to purchase a commercially available
memory card. In addition to memory card storage, the camera
also has built-in memory, which is enough to hold a few
snapshots or a short movie. Use built-in memory for test
purposes, emergency use, etc.
4. Use [S] and [T] to select the sleep or Auto
Power Off trigger time and then press [SET].
Selecting “Off” for the sleep setting disables the sleep
feature.
NOTE
NOTE
• Images can be copied between the camera’s built-in
•
When both sleep and Auto Power Off have the same time
• The following data is stored in built-in memory. It cannot be
copied to a memory card.
settings, Auto Power Off takes priority.
• Sleep and Auto Power Off are disabled under the following
conditions.
– Face Recognition data saved with Record Family
– BEST SHOT mode user image information
– FAVORITE folder
– Mode memory settings
– Start-up screen image
– When there is a connection between the camera and
computer or other device
– During Voice Recording playback or recording
– During movie recording and playback
GETTING READY
B
Download from Www.Somanuals.com. All Manuals Search And Download.
45
• Certain types of memory cards take longer to record data,
which can cause movie frames to be dropped. “ ” and
” flash on the monitor screen during recording to let
you know when a frame has been dropped. Use of a
memory card with a maximum transfer speed of at least
10MB per second is recommended.
• SD memory cards and SDHC memory cards have a write
protect switch. Use it when you need to guard against
accidentally deleting data. Note, however, if you write
protect a memory card you must then turn write protection
off whenever you want to record to the card, format it, or
delete any of its images.
Supported Memory Cards
Your camera supports use of the
following types of memory cards.
SD Memory Card
SDHC Memory Card
MMC (MultiMediaCard)
MMCplus (MultiMediaCardplus)
• For information about memory card
capacity, see page 259.
“
Memory Used for Storage
• Electrostatic charge, electrical noise, and other
phenomena can cause data to become corrupted or even
lost. Make sure that you always back up important data on
other media (CD-R, CD-RW, MO disk, hard disk, etc.).
Images recorded while a memory card is loaded are saved to
the memory card. When no memory card is loaded, images are
saved in built-in memory.
• Note that you cannot save images in built-in memory while a
memory card is loaded in the camera.
IMPORTANT!
• See the instructions that come with the memory card for
information about how to use it.
• Certain types of cards can slow down processing speeds. If
you are using a slow memory card, you may not be able to
record a movie using the “UHQ”, “UHQ Wide”, “HQ”, or
“HQ Wide” image quality setting. Because of this, use of a
memory card with a maximum transfer speed of at least
10MB per second is recommended.
GETTING READY
Download from Www.Somanuals.com. All Manuals Search And Download.
46
2. Load a memory card into the camera.
Positioning the memory card so its front is facing upwards
(towards the monitor screen side of the camera), slide it into
the card slot all the way in until you hear it click securely into
place.
Loading a Memory Card into the Camera
IMPORTANT!
• Make sure you always turn off the camera before loading or
removing a memory card.
• Be sure to orient the card correctly when loading it. Never
try to force a memory card into the slot when you feel
resistance.
MEMORY
CARD
1. Open the battery cover.
While pressing the battery cover, slide it in the direction
indicated by the arrow.
Front
Front
Back
3. Close the battery cover.
Swing the battery cover closed, and then slide it securely
into place as you press it against the camera.
GETTING READY
Download from Www.Somanuals.com. All Manuals Search And Download.
47
Replacing the Memory Card
IMPORTANT!
• Never insert anything besides a supported memory card
• Should water or any foreign object ever get into the card
slot, immediately turn off the camera, remove the battery,
and contact your retailer or nearest CASIO authorized
service center.
1. Remove the memory card from the camera.
Press the memory card and then release it, so it comes part
way out. Pull the card out the rest of the way by hand.
• Never remove a card from the camera while the operation
lamp is flashing green. Doing so can cause the image save
operation to fail and even damage the memory card.
2. Load the other memory card.
GETTING READY
Download from Www.Somanuals.com. All Manuals Search And Download.
48
1. Load the memory card you want to format into
Formatting a Memory Card
Before using a new memory card for the first time, you need to
format it. Once you format a memory card, you will not need to
format it each time you use it.
the camera.
2. Turn on the camera and press [MENU].
Formatting a memory card that already has files on it will delete
its contents.
3. On the “Set Up” tab, select “Format” and then
press [X].
IMPORTANT!
4. Use [S] and [T] to select “Format” and then
press [SET] to start formatting.
After formatting is complete, enter the PLAY mode and
check to make sure the “There are no files.” message
appears on the monitor screen.
• Note that data deleted by a memory card format operation
cannot be recovered. Double-check to make sure that you
really want to delete all the contents of the memory card
before proceeding with the format operation.
• To exit the format operation without formatting, select
“Cancel”.
• Even if the file data on a memory card is protected (page
• Be sure to use the camera to format a memory card.
Formatting a memory card on a computer and then using it
in the camera can slow down data processing by the
camera. In the case of an SD memory card or SDHC
memory card, formatting on a computer can result in non-
conformity with the SD format, causing problems with
compatibility, operation, etc.
GETTING READY
Download from Www.Somanuals.com. All Manuals Search And Download.
49
■ Memory Card Precautions
Using On-screen Menus
The following are menu operations you will need to use to
configure camera settings. Take a few moments to become
familiar with them.
menu contents.
some of the settings that appear on the menu screen. In any
case where the same setting can be configured both on the
Operation Panel and on the menu screen, the Operation
Panel operation is always shown.
• If a memory card starts to behave abnormally, you can restore
normal operation by reformatting it. However, it is
recommended that you always take along more than one
memory card whenever using the camera far away from the
home or office.
• If you experience problems while trying to playback recorded
images, try re-formatting the memory card.
• As you record data to and delete data from a memory card a
number of times, it loses its ability to retain data. Because of
this, periodic re-formatting of a memory card is
recommended.
• Make sure that the battery is charged fully before starting a
formatting operation. Formatting may not be performed
correctly and the memory card may be damaged if the
camera powers down while formatting is in progress.
• Never open the battery cover while formatting is in progress.
Doing so can damage the memory card.
Example Menu Screen
Tabs
Press [MENU] to display the
menu screen.
• Menu contents are different in
the REC mode and PLAY
mode. This screen shows the
REC mode menu.
Settings
GETTING READY
Download from Www.Somanuals.com. All Manuals Search And Download.
50
Menu Screen Operation Buttons
4. Use [S] and [T] to select the setting you want.
[W] [X] Select tabs. [X] is also used to apply a setting.
[S] [T] Select a setting option.
5. Apply the setting.
• Pressing [SET] applies the selected setting and exits the
menu screen.
[SET] Applies the selected settings.
[MENU] Exits the menu screen.
• Pressing [W] instead of [SET] applies the selected setting
and returns to the menu screen. You can then continue
configuring other settings, if you want.
The following is the procedure for menu operations in the REC
• To select another tab, press [W], use [S] to return to the
tab and then use [W] and [X] to switch to another tab.
mode.
1. In the REC mode, press [MENU].
IMPORTANT!
This displays the menu screen.
contents to four menu items each, using larger size
characters. The easy mode also displays simple onscreen
help.
2. Use [W] and [X] to select the tab where the
item you want to configure is located.
Here, we will select the “REC” tab.
3. Use [S] and [T] to
select the item you
want to configure and
then press [X].
Example: Select “Focus” and
then press [X].
GETTING READY
Download from Www.Somanuals.com. All Manuals Search And Download.
51
Panel
setting
Configuring Monitor Screen Settings
You can use the display menu to configure various monitor
Description
Pressing [SET] in
screen settings.
the REC mode
while “On” is
selected will cause
the top icon of the
Operation Panel to
Selecting a Screen Layout
The contents of the layout setting menu depend on whether the
camera is in the REC mode or the PLAY mode.
On
become
■ REC Mode Screen Layout
highlighted (selected). You can then use the
Operation panel to change settings. Since there
are few icons superimposed on the displayed
image, they do not interfere with recording.
For the REC mode, the screen layout settings let you select the
layout of icons.
1. In the REC mode, press [MENU].
2. Use [W] and [X] to select the “Set Up” tab.
3. Use [S] and [T] to select “
press [X].
Panel” and then
4. Use [S] and [T] to select the setting you want,
and then press [SET].
GETTING READY
Download from Www.Somanuals.com. All Manuals Search And Download.
52
Panel (Operation Panel)
Panel
setting
Description
1
With this option,
the image being
composed
completely fills the
monitor screen.
This setting is best
when you want to
2
3
4
5
6
7
8
Off
9
display the subject on a large 16:9 aspect ratio
superimposed on the displayed image.
Anti Shake (page 102)
EV shift (page 125)
easy Mode (page 65)
1
2
3
4
5
6
7
8
All screen shots in this manual show what appears when the
Operation Panel is turned on.
9
GETTING READY
Download from Www.Somanuals.com. All Manuals Search And Download.
53
*1 Image quality cannot be changed using Panel (Operation
Panel).
*2 You can select date or time display.
2. Use [S] and [T] to select the icon of the
setting you want to change.
3. Use [W] and [X] to change the setting.
*3 You can use the “Date Style” to select either month/day or
• If you want to configure other settings, repeat steps 2 and
3.
The time display format is always 24 hours, regardless of the
4. After all the settings are the way you want,
press [SET].
The following procedure shows how to use Panel (Operation
• This will apply the settings and return to normal operation
Panel).
(no Operation Panel icon selected).
1. In the REC mode,
press [SET].
IMPORTANT!
This highlights (selects) the
top icon of the Operation
Panel.
• Panel (Operation Panel) is not displayed while Voice
Recording is being used.
GETTING READY
Download from Www.Somanuals.com. All Manuals Search And Download.
54
■ PLAY Mode Screen Layout
The PLAY mode screen layout settings let you select how
Display
setting
Description
display images are shown on the monitor screen.
With this setting,
the display image
is the maximum
1. In the PLAY mode, press [MENU].
possible size that
allows the entire
2. Use [W] and [X] to select the “Set Up” tab.
Wide
3. Use [S] and [T] to select “
then press [X].
Display” and
image to be
displayed
horizontally. With some aspect ratios, the top and
bottom of the image will be cut off.
4. Use [S] and [T] to select the setting you want,
and then press [SET].
With this setting,
100% of the
display image is
always visible. With
some aspect
4:3
ratios, black bands
may appear above
and below, or to the left and right of the image.
GETTING READY
Download from Www.Somanuals.com. All Manuals Search And Download.
55
Turning Display Information On and Off
You can turn display information on and off by pressing [S]
(DISP). You can configure separate settings for the REC mode
and PLAY mode.
Display
Information Description
Setting
Turns off display
of all information.
Display
Hide
Information Description
Setting
Turns on display
of camera setting
IMPORTANT!
and other
information.
Show
• You cannot turn display information on or off while an audio
snapshot record operation is standing by or in progress.
• The following shows the display information options
available during voice recording.
Turns on display
of camera setting
In this voice
and other
+Histogram
You can select these display
recording
indicators, along
information options:
mode:
with a histogram
REC mode
PLAY mode
Display information or monitor screen off
Display information or hide information
GETTING READY
Download from Www.Somanuals.com. All Manuals Search And Download.
56
PLAY mode
If you lose your way...
To return to the normal playback
screen
Perform one of the following operations if you find that you have
gotten lost while performing button operations during recording
or playback.
Current Screen
Menu screen
[MENU] or [
]
REC mode screen
Press [
Press [
]
REC mode
]. You could also select
Delete screen
To return to the normal snapshot
Current Screen
“Cancel” and then press [SET].
or movie recording screen, press:
Menu screen
[MENU] or [
[BS] or [
]
BEST SHOT screen
]
“There are no files.”
screen
Press [
Press [
].
].
PLAY mode screen
GETTING READY
Download from Www.Somanuals.com. All Manuals Search And Download.
57
SHOOTING A SNAPSHOT
IMPORTANT!
Holding the Camera Correctly
• Take care that your fingers and the strap do not cover any
of the areas indicated in the illustration.
Holding the camera with one hand can result in accidental hand
movement. Hold the camera securely with both hands when
shooting snapshots.
• To protect against accidentally dropping the camera, attach
the wrist strap and make sure it is around your fingers or wrist
while you are operating the camera.
Microphone
Flash
• The supplied strap is intended for use with this camera only.
Never use it for any other purpose.
• Never swing the camera around by its strap.
Horizontal
Vertical
Self-timer Lamp
Lens
Hold the camera as shown in the Hold the camera so the
illustration, with your arms firmly
against your sides.
flash is above the lens.
SHOOTING A SNAPSHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
58
Shooting a Snapshot
NOTE
• Good-looking images are impossible if you move the
1. Press [
] (REC) to
Remaining Snapshot
Memory Capacity
camera when you press the shutter button or while the
Auto Focus operation is being performed. Holding the
camera correctly, carefully press the shutter button and
take care that you do not move the camera as the shutter
releases. This is especially important when available
lighting is low, which slows down the shutter speed.
enter the REC mode.
Confirm that the subject
(people, scenery, etc.) and
Auto Icon
the Auto icon “
” are
displayed on the monitor
screen.
If any icon other than the
Auto icon “
” is displayed,
Focus Frame
SHOOTING A SNAPSHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
59
2. Focus the image.
3. Shoot the image.
While the focus frame is aligned with the subject, half-press
the shutter button.
When the image is focused, press the shutter button the rest
of the way.
Auto Focus will focus the image automatically, and the focus
frame and operation lamp will turn green. The aperture,
shutter speed, and ISO sensitivity also will be set
automatically.
Operation Lamp
Shutter Button
This will shoot the snapshot and save it to the memory card
or the camera’s built-in memory.
Shutter Button
SHOOTING A SNAPSHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
60
If the image does not focus...
NOTE
If the focus frame stays red and the operation lamp is flashing
green, it means that the image is not in focus (because the
subject is too close, etc.). Point the camera at the subject and try
to focus again.
• The aperture value indicates the size of the opening that
lets light into the camera. A larger aperture value indicates
a smaller opening. The camera adjusts this setting
automatically.
• Shutter speed indicates the amount of time that light is
allowed into the camera. A slower shutter speed means
that light is allowed in for a longer time. Shutter speed is
indicated on the monitor screen as seconds (1/1000
second, etc.) The camera adjusts this setting automatically.
Checking a Snapshot
A snapshot will remain on the monitor screen for a short while
after you shoot it and then disappear when the camera gets
ready for the next image.
Perform the following operation to view a snapshot after you
shoot it.
Press [
].
This will display the snapshot you just shot.
Use [W] and [X] to scroll through other images in memory.
To return to the REC mode, press [
].
SHOOTING A SNAPSHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
61
■ Fully pressing the shutter button without
Specifying Image Size
waiting for Auto Focus
A digital camera image is a collection of small dots (pixels).
The size of an image indicates how many pixels it contains, and
is expressed as horizontal pixels × vertical pixels. The initial
factory default image size setting is 7M (3072 × 2304 pixels).
Note that a larger image takes up more memory.
You can shoot snapshots by pressing the shutter button all the
way without waiting for Auto Focus. What the camera does in
off.
• For information about image size, image quality, and number
This setting applies to snapshots only.
When Quick Shutter is turned on
High-speed Auto Focus is enabled, which helps you capture
exactly the moment you want. Quick Shutter comes in handy
when shooting a fast-moving subject.
• Some images may be out of focus when Quick Shutter is
used.
• Quick Shutter is turned on as the initial factory default setting.
1. In the REC mode, press [SET].
2. Use [S] and [T] to select the top option in the
operation panel (Image Size).
When Quick Shutter is turned off
3. Use [W] and [X] to select an image size and
Normal Auto Focus is performed and then the image is
recorded.
then press [SET].
• If you keep the shutter button depressed, images will continue
to be shot without focus.
•
Whenever possible, take a little extra time to half-press the
shutter button in order to ensure proper focus.
SHOOTING A SNAPSHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
62
• Selecting 3:2 (3072 × 2048 pixels) records images with an
aspect ratio of 3:2, which matches the standard aspect ratio
(3:2) of print paper.
• The letters “HDTV” stand for “High Definition Television”. An
HDTV screen has an aspect ratio of 16:9, which makes them
wider than the usual 4:3 aspect ratio of television screens of
the past. Your camera can record images that are compatible
with the aspect ratio of an HDTV screen.
• VGA (640 × 480 pixels) is the optimum size when attaching
images to e-mail.
• Print paper sizes should be thought of as rough estimates
only (200 dpi print resolution).
NOTE
• The following information changes on the display during
the image size selection operation.
– Image size in pixels (1600 × 1200, etc.)
– Optimum print paper size
– Remaining snapshot memory capacity
Image Size (Pixels)
Print Paper Size
3072 × 2304 A3 Print
7M
Larger
3:2
3072 × 2048 A3 Print
3072 × 1728 HDTV
16:9
5M
2560 × 1920 A3 Print
2048 × 1536 A4 Print
1600 × 1200 3.5" × 5" Print
3M
2M
Smaller
VGA
640 × 480
E-Mail
SHOOTING A SNAPSHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
63
Specifying Image Quality
NOTE
Your camera lets you select “Fine” (maximum image quality),
“Normal”, or “Economy” (maximum memory economy) for the
image quality setting. The initial setting is “Normal”. Select “Fine”
if you want to give priority to image quality, or “Economy” to give
priority to the number of images you can store in memory.
• For information about image size, image quality, and number
• The “Fine” setting helps to bring out details when shooting
a finely detailed image of nature that includes dense tree
branches or leaves, or an image of a complex pattern.
This setting applies to snapshots only.
1. In the REC mode, press [MENU].
2. On the “Quality” tab, select “
then press [X].
Quality” and
3. Use [S] and [T] to select the image quality
setting you want and then press [SET].
SHOOTING A SNAPSHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
64
■ Using the easy Menu
The easy menu contains flash, self-timer, and image size
settings, plus an item for exiting the easy mode.
Using the easy Mode
The easy mode eliminates troublesome setups. This mode is
recommended for those who are new to digital imaging.
While the camera is in the easy mode, all the other settings
(besides Self-timer, Image Size, and easy Mode) on the REC
at preset optimum values. Any settings you configured on these
tabs are not used in the easy mode.
1. In the REC mode, press [SET].
2. Use [S] and [T] to select the second option
from the bottom in the operation panel (easy
mode).
IMPORTANT!
3. Use [W] and [X] to select “
press [SET].
ON” and then
the easy mode. To do this, select the “easy Mode” item in
step 2 of the following procedure, and then select
This enters the easy mode.
in
step 3. After that, you can use the Setup tab menu as you
normally do.
4. Focus the image.
While the focus frame is aligned with the subject, half-press
the shutter button.
5. Shoot the image.
When the image is focused, press the shutter button the rest
of the way.
SHOOTING A SNAPSHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
65
1. Press [MENU].
The easy menu displays
larger text than standard
menus.
• An asterisk (*) indicates reset default settings.
• See the following sections for full details about the
“Flash”, “Self-timer”, or “Image Size” settings.
• The following are the settings you can select for “easy
Mode”.
2. Use [S] and [T] to select the menu item you
want, and then press [SET].
Select this
To do this:
setting:
3. Use [S] and [T] to select the setting you want,
and then press [SET].
Stay in the easy mode, without switching
to another recording type
Menu Item:
Available Settings:
Switch from the easy mode to a standard
recording type
(Auto Flash)* /
(Flash Off)
(Flash On) /
Flash
• On-screen pop-up help text provides a brief explanation
of each setting.
Self-timer
Image Size
easy Mode
Exit Menu
(10-second self-timer) /
* /
*
/
/
*
Exit the easy menu
SHOOTING A SNAPSHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
66
Snapshot Shooting Precautions
Auto Focus Restrictions
• Proper focus may not be possible when shooting the following
types of subjects.
■ Operation
• Never open the battery cover while the operation lamp is
flashing green. Doing so can result in incorrect storage of the
image you just shot, damage to other images stored in
memory, malfunction of the camera, etc.
• If unneeded light is shining directly onto the lens, shade the
lens with your hand when shooting an image.
– Solid color wall or other very low contrast subject
– Strongly back lit subject
– Very shiny subject
– Blinds or other subject with a repeating horizontal pattern
– Multiple subjects at varying distances from the camera
– Subject in a dark location
– Fast-moving subject
– Subjects outside the focus range of the camera
• Proper focus may not be possible if the camera is moved
while shooting.
• An image may be out of focus even though the operation
lamp is lit green and the focus frame is green.
■ Monitor Screen when Shooting Snapshots
• The image that appears on the monitor screen is for image
composition. The actual image will be recorded at the quality
set for the image quality setting.
• Subject brightness conditions can cause monitor screen
response to slow and can cause digital noise in the monitor
screen image.
■ Shooting Indoors under Fluorescent
Lighting
• Minute flickering of fluorescent lighting can affect the
brightness or color of an image.
SHOOTING A SNAPSHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
67
2. Press the zoom button to change the zoom
Shooting with Zoom
factor.
Your camera provides you with 3X optical zoom (which changes
the lens focal distance), which can be used in combination with
digital zoom (which digitally process the center portion of the
image to enlarge it) for total zoom capabilities of 12 - 45.2X.
Press this side of the
zoom button:
To do this:
Enlarge the subject and narrow
the range
[
[
] (telephoto)
IMPORTANT!
Reduce the size of the subject
and broaden the range
] (wide angle)
• Generally speaking, the higher the digital zoom factor, the
coarser the image that is recorded. However, digital zoom
can be used up to a certain point without causing
deterioration of the image.
• Digital zoom is not supported while “Timestamp” (page
1. Enter the REC mode.
[
][
]
Zoom button
Wide Angle
Telephoto
3. Press the shutter button to shoot.
SHOOTING A SNAPSHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
68
■ Optical Zoom and Digital Zoom Switch Point
NOTE
If you hold down the [
] side of the zoom button in step 2 of
• Performing a zoom operation changes the lens aperture.
the above procedure, the zoom operation will stop when the
optical zoom factor reaches its maximum. Momentarily releasing
• Use of a tripod is recommended to protect against hand
movement when using the telephoto setting (zoom in).
• Optical zoom is disabled while shooting a movie. Digital
zoom only is available while shooting a movie. Make sure
you select the optical zoom setting you want to use before
you press the shutter button to start shooting your movie.
the zoom button and then holding down its [
] side will switch
to digital zoom, which you can use to set an even higher zoom
factor.
•
When the zoom pointer moves past the maximum limit of
optical zoom. Also, the zoom bar indicates the approximate
zoom factor.
Digital Zoom Indicator
Focus Range
(Displayed when shooting
with Auto Focus, macro, or
manual focus.)
Zoom Bar
SHOOTING A SNAPSHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
69
• The image deterioration point depends on the image size
factor you can use before reaching the image deterioration
point.
Undeteriorated Image Quality
Range
Deteriorated Image Quality
Range
• Though digital zoom generally causes a deterioration of
image quality, some digital zoom without image deterioration
is possible with image sizes of “5M (2560 × 1920 pixels)” and
smaller. The range in which you can use digital zoom without
image deterioration is indicated on the display. The
deterioration point depends on the image size.
3X to 14.2X*
Optical/Digital Switch Point
1X
12X to 45.2X*
Zoom Pointer
(Indicates current
zoom.)
Image Deterioration Point
Image starts to deteriorate from here.
* Point factor depends on image size.
• The digital zoom range of the zoom indicator is shown on the
monitor screen only while “Digital Zoom” is turned on.
● Zoom Values for Each Image Size
Deteriorated Image
Quality Range
Undeteriorated Image
Quality Range
7M
1X
1X
1X
1X
1X
1X
1X
3X
12X
12X
3:2
3X
3X
16:9
5M
12X
3.6X
4.5X
5.7X
14.2X
14.2X
17.9X
22.6X
45.2X
3M
2M
VGA
SHOOTING A SNAPSHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
70
■ Turning Off Digital Zoom
Using Flash
Perform the following steps to select the flash mode you want to
use.
You can turn off digital zoom if you want to use optical zoom
only. This will help to avoid deteriorated images due to
accidentally switching over from optical zoom to digital zoom
when shooting snapshots.
Flash Setting
Description
Auto Flash Flash fires automatically in accordance with
exposure (amount of light and brightness)
conditions.
1. In the REC mode, press [MENU].
2. On the “REC” tab, select “Digital Zoom” and
then press [X].
• Initial factory default setting.
Flash Off
Flash On
Flash does not fire.
3. Use [S] and [T] to select “Off” and then press
Flash always fires.
[SET].
• This setting can be used to brighten a
subject that normally comes out dark due
to daylight or backlight (daylight synchro
flash).
• If you want to show the entire digital zoom range, select
“On” here.
Soft Flash Always use soft flash, regardless of
exposure conditions.
• Use this setting when you want to
suppress the flash to avoid reflection, etc.
Red Eye
Reduction
Flash fires automatically in accordance
same conditions as Auto Flash. This setting
can be used to reduce the red eye effect that
occurs in images of people shot with flash.
SHOOTING A SNAPSHOT
B
Download from Www.Somanuals.com. All Manuals Search And Download.
71
Approximate Flash Range (ISO Sensitivity: Auto)
NOTE
Wide Angle : 0.1 m to 3.5 m (0.3' to 11.5')
Telephoto : 0.6 m to 1.9 m (2.0' to 6.2')
•
can cycle through the flash modes by pressing [T]
(
).
• The flash range changes in accordance with optical zoom.
IMPORTANT!
1. In the REC mode, press [SET].
•
When using flash, take care that
the flash window is not blocked
by your fingers or the camera
strap.
Flash
2. Use [S] and [T] to select the second option
from the top in the operation panel (Flash).
3. Use [W] and [X] to
select the flash setting
you want and then
press [SET].
This causes an indicator
identifying the selected flash
mode to appear on the
monitor screen.
4. Press the shutter button to shoot.
SHOOTING A SNAPSHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
72
Red-eye reduction
■ Checking the Flash Mode
Using the flash to shoot at night or in a dimly lit room can cause
red spots inside the eyes of people who are in the image. This is
caused when the light from the flash reflects off of the retina of
the eye. When red-eye reduction is selected as the flash mode,
the camera fires a pre-flash to cause the irises in the eyes of any
people in the image to close, which reduces the chance of red
eye.
The current flash mode is indicated on the monitor screen and
by the operation lamp when you half-press the shutter button.
Operation Lamp
Flashes orange while the flash is charging.
IMPORTANT!
• Note the following important points when using red-eye
reduction.
“
” indicates flash will fire.
– Red-eye reduction does not work unless the people in
the image are looking directly at the camera (flash).
Before pressing the shutter button, call out to the
subjects so they all look at the camera.
• You will not be able to take another flash snapshot until the
operating lamp stops flashing orange, which indicates that
charging is complete.
– Red-eye reduction may not work very well if the subjects
are located far away from the camera.
SHOOTING A SNAPSHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
73
■ Changing the Flash Intensity
1. In the REC mode, press [MENU].
■ Using Flash Assist
The subject in an image will look too dark if flash intensity is not
enough to reach a subject that is too far away. When this
happens, you can use flash assist to supplement the brightness
of the subject so it appears as if flash illumination was sufficient.
2. On the “Quality” tab, select “Flash Intensity”
and then press [X].
3. Use [S] and [T] to select the flash intensity
setting you want and then press [SET].
You can set one of five levels, from –2 (weakest) to +2
(strongest).
IMPORTANT!
Flash assist used
Flash assist not used
• Flash intensity may not change when the subject is too far
away or too close.
Flash assist is turned on as the initial factory default setting.
Use the following procedure to turn off flash assist when you do
not want to use it.
SHOOTING A SNAPSHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
74
1. In the REC mode, press [MENU].
■ Flash Precautions
• The desired effect may not be obtained when the subject is
too far away or too close.
• Flash charging time depends on operating conditions (battery
condition, ambient temperature, etc.) With a fully charged
battery, it takes anywhere from a few seconds to 7 seconds.
• Shooting with flash turned off when lighting is dim results in a
slow shutter speed, which can cause image blur due to hand
movement. Secure the camera with a tripod, etc.
2. On the “Quality” tab, select “Flash Assist” and
then press [X].
3. Use [S] and [T] to select “Off” and then press
[SET].
When you want to use flash assist, select “Auto” here.
IMPORTANT!
•
With red eye reduction, the flash is fired automatically in
accordance with exposure. It does not fire in areas where
lighting is bright.
• Flash assist may not produce the desired result for some
types of subjects.
• Any of the following can result in the flash assist effect
being canceled out.
• The presence of outdoor sunlight, fluorescent lighting, or
some other light source can cause abnormal image colors.
SHOOTING A SNAPSHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
75
1. In the REC mode, press [MENU].
Using the Self-Timer
With the self-timer, pressing the shutter button starts a timer,
and the shutter is released and the image is shot after a fixed
amount of time.
2. On the “REC” tab, select “Self-timer” and then
press [X].
3. Use [S] and [T] to
select the self-timer
type and then press
[SET].
Self-Timer Type
Description
10 sec
10-second self-timer
10s
2-second self-timer
This causes an indicator
identifying the selected self-
timer type to appear on the
monitor screen.
•
When shooting under conditions that
slow down the shutter speed, you can
use this setting to prevent blur due to
hand movement.
2 sec
2s
This option shoots three images: one
image 10 seconds after the shutter button
is pressed, the next image one second
after the camera gets ready to shoot after
the first image, and the final image one
second after the camera gets ready to
shoot after the second image.
4. Press the shutter button to shoot.
NOTE
X3
x3
(Triple Self-timer)
self-timer setting in the movie mode only.
Off
Self-timer is disabled.
SHOOTING A SNAPSHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
76
Using the Self-timer to Shoot an Image
NOTE
• The image is not shot right
away after you press the
shutter button. Instead,
shooting starts after the
preset time elapses. The self-
timer lamp flashes while the
countdown is being
• The indicator “1sec” appears on the monitor screen
between Triple Self-timer shots. How long it takes for the
camera to get ready to shoot again after it shoots an image
depends on the image size and quality settings, whether or
not a memory card is loaded in the camera, and the flash
charge condition.
• No self-timer operation can be performed when recording
with the any of the following settings.
Self-timer Lamp
performed.
• You can interrupt an ongoing
self-timer countdown by fully
pressing the shutter button
while the self-timer lamp is
flashing red.
– Normal-speed continuous shutter mode or high-speed
continuous shutter mode
– Recording with certain BEST SHOT scenes (Short
Movie, Past Movie, Layout, Auto Framing, Voice
Recording)
• The Triple Self-timer cannot be used when performing the
following recording operations.
– Recording with Flash Continuous Shutter
– Recording with certain BEST SHOT scenes (Business
Cards and Documents, Whiteboard, etc., Old Photo, ID
Photo, Movie, For YouTube)
SHOOTING A SNAPSHOT
B
Download from Www.Somanuals.com. All Manuals Search And Download.
77
Selecting the Continuous Shutter Mode
Using Continuous Shutter
Your camera has three continuous shutter modes.
1. In the REC mode, press [MENU].
Continuous
Description
Shutter Mode
2. On the “REC” tab, select “Continuous” and
then press [X].
Normal Speed
3. Use [S] and [T] to select the mode you want
and then press [SET].
(Normal-speed
Continuous
Shutter)
Continually records images until memory
becomes full.
This enables the continuous shutter mode you selected and
displays its icon on the monitor screen.
To turn off continuous shutter, select “Off”.
High Speed
(High-speed
Continuous
Shutter)
Continually records images at a speed
that is faster than Normal-speed
Continuous Shutter, until memory
becomes full. Image size is fixed at 2M
(1600 × 1200 pixels).
Flash Cont.
Use this mode to record up to three
(Flash Continuous consecutive images, firing the flash for
Shutter) each one.
SHOOTING A SNAPSHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
78
Recording with Normal-speed
Continuous Shutter, High-speed
Continuous Shutter, and Flash
Continuous Shutter
Continuous Shutter Precautions
• Starting a continuous shutter operation causes the exposure
and focus settings to be fixed at the levels for the first image.
The same settings are applied to all subsequent images.
• Continuous shutter cannot be used in combination with any of
the following features.
1. Press the shutter button to shoot.
– Face recognition
•
With Normal-speed continuous shutter and High-speed
continuous shutter, images continue to be shot as long as
you keep the shutter button depressed. Releasing the
shutter button stops shooting.
– Some BEST SHOT scenes (Layout, Auto Framing,
Business Cards and Documents, Whiteboard, etc., Old
Photo, ID Photo, Movie, Short Movie, Past Movie, For
YouTube, Voice Recording)
• Flash continuous shutter can shoot up to three images.
Shooting stops if you release the shutter button before
three images are recorded.
•
When using a continuous shutter mode, keep the camera still
until all recording is finished.
• A continuous shutter operation may stop part way through if
memory capacity runs low.
• The continuous shutter rate depends on the current image
size and image quality settings.
• You can select the flash mode you want with normal-speed
continuous shutter mode.
IMPORTANT!
• The speed of normal speed continuous shutter and high-
speed continuous shutter depend on the type of memory
card being used and the amount free space available in
memory. When shooting to built-in memory, continuous
shutter shooting is relatively slow.
•
With high-speed continuous shutter, the flash mode
automatically becomes “ ” (flash off).
With the flash continuous shutter mode, the flash mode
automatically becomes “ ” (flash on).
•
SHOOTING A SNAPSHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
79
• Note that the resolution of images recorded with the high-
speed continuous shutter mode or flash continuous shutter
mode is somewhat lower resolution and more prone to digital
noise than images recorded with the normal-speed
continuous shutter mode.
• “Auto” ISO sensitivity always is used for the high-speed
continuous shutter mode or flash continuous shutter mode,
regardless of the current ISO sensitivity setting.
Adding Audio to a Snapshot
You can add an audio recording to snapshots, if you want. Use
this feature to add a verbal explanation or a description of the
mood to a snapshot, or to capture the sounds of the people in
the snapshot.
• You can record up to about 30 seconds of audio for a single
snapshot.
•
With the flash continuous shutter mode, the flash range is
narrower than normal.
■ Turning on Audio Snapshot
1. In the REC mode, press [MENU].
2. On the “REC” tab, select “Audio Snap” and
then press [X].
3. Use [S] and [T] to select “On” and then press
[SET].
SHOOTING A SNAPSHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
80
Playing Back Snapshot Audio
■ Recording Audio for a Snapshot
Audio snapshots in the PLAY mode are indicated by the “
icon.
Press [SET] while an audio snapshot is displayed to play back
its audio.
”
1. Press the shutter
button to shoot.
This monitor screen will
show the image you just
shot, along with the “
icon.
• If you do not want to
record audio at this time,
press [MENU]. This will
display the monitor screen
for shooting the next image.
”
IMPORTANT!
Remaining Recording Time
• Take care that you do not block
the camera’s microphone with
your fingers while recording.
• Good recording results are not
possible when the camera is too
far away from what you are
trying to record.
Microphone
2. Press the shutter button to start audio
recording.
3. Press the shutter button again to stop audio
recording.
Recording will stop automatically after about 30 seconds if
you do not press the shutter button.
• To turn off the audio snapshot feature, select “Off” in step
3 of the procedure under “Turning on Audio Snapshot”.
SHOOTING A SNAPSHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
81
Face Recognition
The face recognition feature gives priority to the human faces in
an image for focus and brightness settings. The following
describes to two available face recognition modes.
NOTE
• After transferring an audio snapshot to your computer’s
hard disk, you can play back the audio using QuickTime
• The following shows the formats used for storing audio
snapshot data.
Face
Recognition Description
Mode
– Image Data: JPEG (.JPG extension)
– Audio Data: WAVE/ADPCM (.WAV extension)
– Approximate Audio File Size: 165 KB (30-second
recording at 5.5KB per second)
Detects human faces and adjusts focus and
brightness accordingly.
• You cannot turn off the monitor screen by pressing [S]
(DISP) while audio recording is in progress.
• Audio snapshot capabilities are disabled while shooting
with the Triple Self-timer or with a continuous shutter mode.
You can, however, add audio to such a snapshot after you
•
When multiple faces are detected, image is
given to any relatively large face located in
the center of the image.
Normal mode
Detects human faces. When multiple faces are
detected, this mode gives setting priority to the
faces of family members whose faces have
been registered using Record Family.
Family First
mode
SHOOTING A SNAPSHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
82
6. When you are ready to shoot, press the
shutter button the rest of the way.
The camera will adjust its settings so the framed faces are
of proper brightness.
Performing a face recognition recording
operation (Normal Mode)
1. In the REC mode, press [SET].
2. Use [S] and [T] to
select the third option
from the top in the
operation panel (Face
Recognition).
NOTE
• Half pressing the shutter button to perform face recognition
while “
area will cause the focus frame to follow the movement of
the face.
3. Use [W] and [X] to select “
Face Detection:
Normal” and then press [SET].
4. Point the camera at the
subjects.
The camera will detect the
faces of any people in the
image. The detected faces all
will be bounded by frames
after detection is complete.
5. Half-press the shutter button.
The focus frame of the face that is focused becomes green.
SHOOTING A SNAPSHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
83
5. When the message “Face recognition
successful!” appears, use [S] and [T] to
select “Save” and then press [SET].
This will record the face data and return to the recording
screen.
Using the Family First Mode to Give
Priority to Particular Faces
■ Using Record Family to Pre-record Face
Data
• To re-record the face data, select “Cancel”.
To use the Family First mode, you need to pre-record facial data
for the friends and family members to which you want to give
priority.
NOTE
• You can have up to six sets of face data recorded in the
camera.
1. In the REC mode, press [SET].
• Face data is stored in the camera’s built-in memory, in a
the data in the “FAMILY” folder can cause the camera to
stop operating properly. Never delete or edit any data in the
“FAMILY” folder.
2. Use [S] and [T] to select the third option from
the top in the operation panel (Face
Recognition).
3. Use [W] and [X] to select “
Record Family”
and then press [SET].
4. Point the straight at
the person whose face
you want to record,
adjust as required to
the face fits within the
frame on the monitor
screen, and then press
the shutter button.
SHOOTING A SNAPSHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
84
6. Use [W] and [X] to select the priority level you
■ Using Edit Family to Assign a Priority Level
to Recorded Face Data
want and then press [SET].
• You can select any one of four levels, from “
(Lowest) to “ ” (Highest). Selecting “
(Disabled) will disable face recognition.
”
After recording face data, you can assign a name and a priority
level that controls how the data is applied when shooting a
snapshot.
”
1. In the REC mode, press [SET].
Deleting recorded face data
Perform the following steps when you want to delete recorded
face data.
2. Use [S] and [T] to select the third option from
the top in the operation panel (Face
Recognition).
1. In the REC mode, press [SET].
3. Use [W] and [X] to
2. Use [S] and [T] to select the third option from
the top in the operation panel (Face
Recognition).
select “
Edit
Family” and then press
[SET].
This display the face data
editing screen.
3. Use [W] and [X] to select “
Edit Family”
and then press [SET].
4. Use [S], [T], [W], and [X] to select the face
4. Press [MENU].
data you want to edit, and then press [SET].
5. Use [W] and [X] to select a name, and then
press [T].
• You can select any one of 12 preset names to face data.
SHOOTING A SNAPSHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
85
188) to delete the face data you want.
■ Shooting a Snapshot using Recorded and
Edited Face Data
After you record and edit face data, you can use it to shoot
photographs. The camera will record images in accordance with
the priority levels you configured for each set of face data.
• You can exit this procedure by pressing [MENU].
NOTE
1. In the REC mode, press [SET].
deletes all the recorded face data.
2. Use [S] and [T] to select the third option from
the top in the operation panel (Face
Recognition).
3. Use [W] and [X] to select “
Face
Recognition: Family First” and then press
[SET].
SHOOTING A SNAPSHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
86
4. Point the camera at the
subjects.
NOTE
• The “
(Tracking)” is selected for the AF area whenever
The camera will detect the
faces of the people whose
face data has been saved in
“Family First” is selected as the face recognition mode
camera memory. The
detected faces all will be
Selecting the Face Detection Method (Priority)
Use the following procedure to specify whether you want to give
priority to faster speed or a higher number of faces during face
detection.
bounded by frames after detection is complete.
• The frames will be colored according to the priority level
of the face: White (lowest), yellow, or green (highest). A
green frame indicates the highest priority face when the
image is recorded.
1. In the REC mode, press [SET].
2. Use [S] and [T] to select the third option from
the top in the operation panel (Face
Recognition).
5. Half-press the shutter button.
This will focus on the face with the highest priority (the one
with the green frame) and adjust its brightness. When
focusing is complete, a green focus frame will appears at
the faces that were indicated by green frames in step 4
above.
3. Use [W] and [X] to select “
Priority” and
then press [SET].
6. When you are ready to shoot, press the
shutter button the rest of the way.
SHOOTING A SNAPSHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
87
4. Use [S] and [T] to select the setting you want,
Face Recognition Precautions
• The maximum number of faces that can be detected at one
time is five when “Speed” is selected for the “Priority” setting,
and ten when “Quantity” is selected.
and then press [SET].
Select this
To do this:
setting:
• Detection of the following types of faces is not supported.
– A face that is partially obstructed by hair, sunglasses, a hat,
etc
– A face that is shaded from the light
– A profile of a face that is not shot straight on
– A face that is tilted left or right
Minimize face detection time. Up to five
Speed
faces can be detected.
Allow detection of a maximum of five to
Quantity
ten faces.
– A face that is very far away or very small
– A face that is very close or very large
NOTE
• Selecting “Quantity” while using the Normal mode will
– A face in an area that is very dark
• Face detection is not supported for animals or other non-
human subjects.
make it possible to detected smaller faces at a greater
distance than when “Speed” is selected.
• Even if you have the face of a family member recorded, the
person’s facial expression, shooting conditions, or other
factors can make proper recognition (highest priority
assignment) impossible.
• Face recognition can be improved by recording multiple
versions of the same person’s face indoors and outdoors, with
different expressions, and at different angles.
SHOOTING A SNAPSHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
88
• Face recognition in the Family First mode may be slower than
in the Normal mode because the camera needs time to
determine whether the faces in the image are the same as the
recorded faces. Also, compared with the Normal mode, the
Family First mode will not be able to recognize faces that are
far away and small.
• If the camera is unable to find a face when you press the
shutter button, it will focus on the center of the screen.
• Always make sure that Auto Focus (AF) is selected as the
focus mode when shooting with face recognition. Use of no
other focus mode is supported.
•
When shooting with the camera held sideways (for a portrait
orientation shot), face recognition may take more time when
shooting with the camera held normally (landscape
orientation).
• Face recognition cannot be used in combination with any of
the following features.
– Images recorded with certain BEST SHOT scenes
(Business cards and documents, White board, etc., Old
Photo, ID Photo, Movie, Short Movie, Past Movie, For
YouTube, Layout, Auto Framing, Voice Recording)
• The following functions are disabled when shooting with face
recognition.
– Multi AF
– Continuous Shutter
SHOOTING A SNAPSHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
89
SHOOTING A MOVIE
Image Quality
(pixels)
Approximate
Data Rate
Movie Image Quality
Frame Rate
Before shooting a movie, you should specify a movie image
quality setting. Movie image quality is a standard that
determines the detail, smoothness, and clarity of a movie during
playback. Shooting with the high-quality (HQ) setting will result
in better image quality, but it also shortens the amount of time
you can shoot.
545 Kilobits/
second
15 frames/
second
LP
320 × 240
1. In the REC mode, press [MENU].
• Each movie can be up to 10 minutes long. Movie recording
stops automatically after 10 minutes of recording.
2. On the “Quality” tab, select “
then press [X].
Quality” and
Image Quality
(pixels)
Approximate
Data Rate
3. Use [S] and [T] to select the quality setting
Frame Rate
you want and then press [SET].
5.8 Megabits/
second
30 frames/
second
• The “
” indicator is on the monitor screen while “UHQ
UHQ
640 × 480
Wide” or “HQ Wide” is selected for the quality setting.
7.0 Megabits/
second
30 frames/
second
UHQ Wide 848 × 480
2.8 Megabits/
second
30 frames/
second
HQ
640 × 480
848 × 480
640 × 480
3.4 Megabits/
second
30 frames/
second
HQ Wide
Normal
1.4 Megabits/
second
30 frames/
second
SHOOTING A MOVIE
Download from Www.Somanuals.com. All Manuals Search And Download.
90
Movie File Formats
Shooting a Movie
Audio is also recorded while you shoot a movie. Audio is
monaural.
Movies are recorded using H.264/AVC MOV format.
Movies you shoot with your camera can be played back on a
computer using QuickTime 7.
1. In the REC mode, press [BS].
Movie Size
The following shows the approximate movie file size for a one-
minute movie.
2. Use [S], [T], [W], and [X] to select the “
”
(Movie) scene and then press [SET].
This causes “
” to appear on the monitor screen.
Image Quality
UHQ
Approximate Size
43.3 MB
3. Press the shutter
button to start
Remaining Recording Time
UHQ Wide
HQ
52.3 MB
shooting the movie.
20.8 MB
• “
” is displayed while
HQ Wide
Normal
LP
25.3 MB
movie recording is in
progress.
10.4 MB
4.1 MB
Recording Time
SHOOTING A MOVIE
B
Download from Www.Somanuals.com. All Manuals Search And Download.
91
4. Press the shutter button again to stop
shooting.
Movie Recording Precautions
• You cannot use flash while shooting a movie.
• The camera also records audio. Note the following points
when shooting a movie.
Each movie can be up to 10 minutes long. Movie recording
stops automatically after 10 minutes of recording. Movie
recording also will stop automatically if memory becomes
full before you stop movie recording by pressing the shutter
button.
– Take care that the microphone
is not blocked by your fingers,
etc.
Microphone
– Good results are not possible
when the camera is too far
away from what you are trying
to record.
– Operating camera buttons while
shooting can cause button
noise to be picked up in the audio.
Anti Shake Movie Recording
Turning on Anti Shake for movie recording causes the view
angle to become smaller. Anti Shake reduces the effects of hand
movement only. It does not limit the effects of subject movement
• Shooting a very bright subject can cause a vertical band to
appear in the monitor screen image. This does not indicate
malfunction. The band will be recorded in the case of a movie.
• Certain types of memory cards take longer to record data,
which can cause movie frames to be dropped. “
” and
“
” flash on the monitor screen during recording to let you
know when a frame has been dropped. Use of a memory card
with a maximum transfer speed of at least 10MB per second
is recommended.
SHOOTING A MOVIE
Download from Www.Somanuals.com. All Manuals Search And Download.
92
• Optical zoom is disabled while shooting a movie. Digital zoom
only is available while shooting a movie. If you want to use a
particular optical zoom setting, make sure you select it before
you press the shutter button to start movie recording (page
69).
• The effects of camera movement in an image become more
pronounced when you shoot close up or a large zoom factor.
Because of this, use of a tripod is recommended under these
conditions.
Using Short Movie
Short Movie shoots a movie that starts four seconds before the
shutter button is pressed and ends four seconds after it is
pressed.
• Since four seconds of action before the shutter button is
pressed are recorded, Short Movie is a good way to make
sure you don’t miss the action of kids or other active subjects.
images of Short Movie scenes.
•
When the subject is outside the camera’s focus range,
focusing is not possible and the image will be out of focus.
Shutter button pressed.
Short Movie
Recording Start
Four seconds
Four seconds
SHOOTING A MOVIE
B
Download from Www.Somanuals.com. All Manuals Search And Download.
93
1. In the REC mode, press [BS].
IMPORTANT!
• Movie data is continually recorded and stored in a buffer
before you press the shutter button. Keep the camera
pointed at the subject. Then at the right moment, press the
shutter button. When you press the shutter button, the
remaining recording time of part two of the Short Movie
counts down on the monitor screen.
2. Use [S], [T], [W], and [X] to select the “Short
Movie” scene and then press [SET].
This causes “
” to appear on the monitor screen.
Pressing the shutter button at this point will shoot a Short
Movie with a 4-second first part and a 4-second second
part.
3. With the camera pointed at the subject, press
the shutter button.
This will shoot a Short Movie that for about four seconds,
and then stop shooting automatically. The total length of the
Short Movie will be eight seconds (four seconds before the
shutter button was pressed plus four seconds after it was
pressed). To stop movie recording, press the shutter button
again.
SHOOTING A MOVIE
B
Download from Www.Somanuals.com. All Manuals Search And Download.
94
1. In the REC mode, press [BS].
Using Past Movie
Past Movie is similar to a normal movie, except that it captures
about five seconds of whatever happened in front of the lens
before the shutter button was pressed to start shooting. Past
Movie is a great way to make sure that you never just miss that
special moment because you press the shutter button too late.
2. Use [S], [T], [W], and [X] to select the “Past
Movie” scene and then press [SET].
This causes “
” to appear on the monitor screen, which
indicates that Past Movie is enabled.
3. With the camera pointed at the subject, press
Shutter button pressed.
Shutter button pressed.
the shutter button.
Movie
4. Press the shutter button again to stop
shooting.
Recording Start
Recording End
Movie recording also will stop automatically if memory
becomes full before you press the shutter button.
Past Part Approximately 5 seconds
SHOOTING A MOVIE
Download from Www.Somanuals.com. All Manuals Search And Download.
95
IMPORTANT!
•
When Past Movie is selected, the camera continually
updates an internal buffer that holds about five seconds of
movie images of what has happened in front of the
camera’s lens. When you press the shutter button, your
movie will start with the buffer’s current contents and
continue from there. Be sure to keep the camera still and
pointed in the direction of the subject for some time before
you press the shutter button to start shooting.
SHOOTING A MOVIE
B
Download from Www.Somanuals.com. All Manuals Search And Download.
96
USING BEST SHOT
With BEST SHOT, you simply select the sample scene that is
like the one you are trying to shoot, and the camera sets up
automatically. Even difficult backlight scenes (which result in the
main subject being too dark if set up improperly) come out
looking great!
■ Selecting a Sample Scene
1. In the REC mode, press [BS].
This enters the BEST SHOT mode and displays a screen
showing thumbnails of 15 sample scenes.
• The initial default selection is “
” (Auto).
■ Some Sample Scenes
Boundary
(Currently Selected Sample Scene)
• Portrait
• Scenery
• Night Scene
• Night Scene Portrait
Scene Name
Scene Number
USING BEST SHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
97
2. Use [S], [T], [W], and [X] to move the
boundary to select the scene you want to
select.
3. Press [SET] to apply the settings of the
selected scene and return to the recording
screen.
• Pressing [S] or [T] while the boundary is at the edge of
the screen will scroll to the next screen of BEST SHOT
scenes.
• Pressing the zoom button will display text that explains
Press the zoom button again to return to the scene
selection screen.
• The settings of the scene you selected remain in effect
until you select a different scene.
• To select a different BEST SHOT scene, repeat the
above procedure from step 1.
4. Press the shutter button.
•
While the “
” (Movie) scene is selected, pressing the
shutter button starts and stops movie recording.
• To return to “Auto”, select Scene 1, which is “
” (Auto).
Pressing [MENU] while the scene selection screen or
scene description text is on the monitor screen will cause
the boundary to jump directly to “
” (Auto).
USING BEST SHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
98
• Images shot using a BEST SHOT scene may not produce
the results you expected due to shooting conditions and
other factors.
• You can change the camera settings that are made when
you select a BEST SHOT scene. Note, however, that the
BEST SHOT settings revert to their defaults when you
select another BEST SHOT scene or turn off the camera. If
you think you will later need to use a particular camera
setup you configured, save it as a BEST SHOT user setup
IMPORTANT!
• Night Scene, Fireworks scenes use slow shutter speeds.
Since a slow shutter speed increases the chance of digital
noise in the image, the camera automatically performs a
digital noise reduction process on slow shutter images.
Because of this, such images take longer to store after you
press the shutter button. Do not perform any key operation
while an image is being stored. Also, it is a good idea to
use a tripod to avoid image blur due to camera movement
when shooting at slow shutter speeds.
• Your camera includes a sample scene that optimizes
settings for auction site images. Depending on your
camera model, the sample scene is named either “For
eBay” or “Auction”. Images you record using the auction
site sample scene are stored in a special folder so you can
• The BEST SHOT “For YouTube” scene sets up the camera
for recording movies that are optimized for uploading to
YouTube. Movies recorded with the “For YouTube” scene
are stored in a special folder to make them easy to locate
movies recorded with the “For YouTube” scene is always
“Normal”. Maximum recording time is 10 minutes.
• BEST SHOT scenes were not shot using this camera.
USING BEST SHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
99
Displaying Detailed Information about a BEST
SHOT Scene
To display detailed information
NOTE
• If you select a scene by pressing [SET] while the
description screen is displayed, the same description
scene will appear the next time you press [BS] to view
BEST SHOT sample scenes.
about a BEST SHOT scene,
select it with the boundary on the
scene selection screen and then
press the zoom button.
The following are the different operations you can perform
while the scene description screen is on the display.
• To return to the scene selection screen, press the zoom
button again.
• To scroll through available BEST SHOT scenes, use [W] and
[X].
• To select the currently displayed scene and configure the
camera with its settings, press [SET].
USING BEST SHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
100
■ Creating Your Own BEST SHOT Scenes
IMPORTANT!
You can use the procedure below to save the setups of
snapshots that you shot as BEST SHOT scenes. After that, you
can recall a setup whenever you want to use it.
deletes all the user BEST SHOT scene files.
NOTE
1. In the REC mode, press [BS].
• You can check the settings of the currently selected BEST
SHOT scene by displaying the camera’s setting menus and
looking at its settings.
• User scenes are assigned numbers in the sequence: U1,
U2, and so on.
2. Use [S], [T], [W], and [X] to select “BEST
SHOT” (Register User Scene) and then press
[SET].
3. Use [W] and [X] to select the snapshot whose
• The following are the settings that are included in a user
scenes:
setup you want to register.
Face Recognition, Focus, EV Shift, White Balance, Flash,
ISO, Metering, Flash Intensity, Flash Assist, Color Filter,
Sharpness, Saturation, Contrast
4. Use [S] and [T] to select “Save” and then
press [SET].
Your BEST SHOT scene will be assigned the name “Recall
User Scene”, along with a scene number.
• You can store up to 999 BEST SHOT user scenes.
• User snapshot scenes are stored in camera built-in
USING BEST SHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
101
Deleting a BEST SHOT User Scene
Reducing the Effects of Hand and
Subject Movement
Perform the following steps when you want to delete a BEST
SHOT user scene.
You can turn on the camera’s Anti Shake feature to reduce
image blur due to subject movement or hand movement when
shooting a moving subject using telephoto, when shooting a
fast-moving subject, or when shooting under dim lighting
conditions.
1. In the REC mode, press [BS].
2. Press the zoom button to display its
explanation screen.
You can turn on Anti Shake using BEST SHOT or by performing
a Panel operation.
3. Use [W] and [X] to select the BEST SHOT user
scene you want to delete.
■ Turning on Anti Shake Using BEST SHOT
1. In the REC mode, press [BS].
4. Press [T] (
).
5. Use [S] and [T] to select “Delete” and then
press [SET].
2. Use [S], [T], [W], and [X] to select the “Anti
Shake” scene and then press [SET].
Anti Shake will remain selected until you select a different
BEST SHOT scene.
This will delete the BEST SHOT user scene you selected
and display the next screen (either the next user scene or
the Register User Scene).
6. Use [W] and [X] to select another scene and
then press [SET].
• This returns to the recording state.
USING BEST SHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
102
■ Turning on Anti Shake Using the Panel
IMPORTANT!
(Operation Panel)
is set to “Auto”.
1. In the REC mode, press [SET].
• Though “
” (Anti Shake) is displayed on the monitor
2. Use [S] and [T] to select the fourth option
from the top in the operation panel (Anti
Shake).
screen following an automatic flash operation using the
“Auto Flash” or “Red Eye Reduction” setting, or while the
flash setting is “Flash On” or “Soft Flash”, Anti Shake is
disabled.
3. Use [W] and [X] to select “Auto” and then
• Shooting with Anti Shake can cause an image to appear
somewhat coarser than normal and can cause slight
deterioration of image resolution.
press [SET].
• This turns on Anti Shake and displays “
” on the
monitor screen.
• In this case, Anti Shake will remain on until you turn it off
on the Panel.
• Anti Shake may not be able to eliminate the effects of hand
or subject movement when movement is severe.
• You can also use Anti Shake to reduce the effects of hand
movement only while recording a movie. The effects of
• Anti Shake may not work with a very low shutter speed. If
this happens, use a tripod to stabilize the camera.
• The camera sometimes performs an automatic noise
reduction operation to reduce digital noise in images
recorded under certain lighting conditions. This operation
causes the camera to take longer than normal to store the
image and be ready for the next shot.
USING BEST SHOT
B
Download from Www.Somanuals.com. All Manuals Search And Download.
103
IMPORTANT!
Taking Bright Images without Flash
• High Sensitivity is disabled following an automatic flash
operation using the “Auto Flash” or “Red Eye Reduction”
setting, or while the flash setting is “Flash On” or “Soft
Flash”.
The BEST SHOT “High Sensitivity” scene makes it possible for
you to take natural looking images without using the flash, even
when lighting is low
• Shooting with High Sensitivity can cause an image to
appear somewhat coarser than normal and can cause
slight deterioration of image resolution.
• The desirable level of image brightness may not be
possible under very dark conditions.
•
When shooting with slow shutter speeds, use a tripod to
protect against the effects of hand movement.
Normal Snapshot (With flash) Snapshot with High Sensitivity
• The camera sometimes performs an automatic noise
reduction operation to reduce digital noise in images
recorded under certain lighting conditions. This operation
causes the camera to take longer than normal to store the
image and be ready for the next shot.
1. In the REC mode, press [BS].
2. Use [S], [T], [W], and [X] to select the “High
Sensitivity” scene and then press [SET].
3. Press the shutter button to shoot the image.
High Sensitivity will remain selected until you select a
different BEST SHOT scene.
USING BEST SHOT
B
Download from Www.Somanuals.com. All Manuals Search And Download.
104
BEST SHOT has two Business Shot scenes from which to
choose.
Shooting Images of Business Cards
and Documents (Business Shot)
Shooting a business card, document, whiteboard, or similarly
shaped object from an angle can cause the subject to appear
misshaped in the resulting image. The BEST SHOT Business
Shot scenes correct the shape of rectangular objects so they
appear natural.
• Business cards and
documents
•
White board, etc.
■ Selecting a Business Shot Scene
1. In the REC mode, press [BS].
Before Keystone Correction
After Keystone Correction
2. Use [S], [T], [W], and [X] to select the
“Business cards and documents” or the
“White board, etc.” scene and then press
[SET].
Whichever you select will remain in effect until you select a
different BEST SHOT scene.
USING BEST SHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
105
2. Use [W] and [X] to select the candidate you
■ Shooting an Image Using a Business Shot
Scene
want to use for correction.
1. After selecting either
3. Use [S] and [T] to select “Correct” and then
press [SET].
of the BEST SHOT
Business Shot scenes,
This will correct the image and store the resulting
compose the image
(corrected) image.
and press the shutter
• To cancel the correction operation, select “Cancel”.
button to shoot.
This displays a screen that shows all of the rectangular
shapes in the image that qualify as candidates for keystone
correction.
A red boundary will surround the currently selected
correction candidate. If there is a black boundary, it means
that the black boundary is indicating a second possible
candidate. If there is no second candidate (black boundary),
jump directly to step 3.
• If the camera is unable to detect any keystone correction
candidate at all, the message “Cannot correct image!” will
appear on the monitor screen momentarily and then the
camera will save the image as-is (uncorrected).
USING BEST SHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
106
IMPORTANT!
Shooting ID Photographs
• Make sure the entire object you are trying to shoot (correct)
is enclosed within the monitor screen. The camera will not
be able to detect the shape of the object correctly unless it
is enclosed entirely within the monitor screen.
You can use this procedure to shoot a portrait and then print it
out in a variety of different standard ID photo sizes.
The following are the ID photo sizes that are included on the
printout.
• Correction will not be possible if the subject is the same
color as its background. Make sure the object is against a
background that allows its outline to stand out.
30 × 24mm, 40 × 30mm, 45 × 35mm, 50 × 40mm, 55 × 45mm
■ Selecting the ID Photo Scene
1. In the REC mode, press [BS].
• Digital zoom is disabled while shooting with a Business
Shot scene. However, you can use optical zoom.
• The maximum Business Shot image size is 2M (1600 ×
1200 pixels), even if the camera is configured for a larger
image size. When the camera is configured to record
images smaller than 2M (1600 × 1200 pixels), Business
Shot scenes will produce images in accordance with the
currently specified image size.
2. Use [S], [T], [W], and [X] to select the “ID
Photo” scene and then press [SET].
ID Photo will remain selected until you select a different
BEST SHOT scene.
USING BEST SHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
107
2. Align the guidelines that appear on the
monitor screen with the subject in the
recorded image.
■ Shooting an Image Using the ID Photo Scene
1. On the monitor screen,
compose the image by
positioning the subject
within the on-screen
Head Line
Oval Boundary
frame and then press
the shutter button to
shoot an initial
Chin Line
temporary image.
Align the subject so the head fills the oval boundary. Also
make sure that the subject’s head is within the head line and
the chin line.
• The initial temporary image is not saved in memory. The
final image is saved in memory when you perform step 3,
below.
To do this:
Perform this operation:
Use [S], [T], [W], [X].
Press the zoom button [
Press the zoom button [
Move the subject up,
down, left, and right
Enlarge the subject
].
].
Reduce the size of the
subject
3. When everything is the way you want, press
[SET].
This saves the image in memory.
USING BEST SHOT
B
Download from Www.Somanuals.com. All Manuals Search And Download.
108
IMPORTANT!
Restoring an Old Photograph
With Old Photo, you can record the image of an old, faded
photograph and then use the camera’s built-in advanced digital
camera technology to restore it.
• The size of the ID photo image for this operation is fixed
automatically at 7M (3072 × 2304 pixels).
■ Printing an ID Photo
Printing an ID photo image will print the same image in various
sizes on a single sheet of paper. Then you can cut out the
image(s) you want to use.
■ Before Recording with Old Photo
• Make sure the entire photograph you are trying to record is
enclosed within the monitor screen.
• Make sure the photograph is against a background that
allows its outline to stand out, and that it fills the monitor
screen to the maximum extent possible.
• Make sure that light is not reflecting off the surface of the
original photograph when recording it.
• If the old photograph is portrait orientation, be sure to
compose the image with the camera in landscape (horizontal)
orientation.
IMPORTANT!
• The ID photo sizes provided here are not exact. Actual
sizes may be slightly larger.
When printing an ID photo, be sure to print on 4" × 6" size
paper. Images may not print at the proper sizes if another
size of paper is used.
When printing an ID photo, be sure to set up your printer for
“borderless print”. For full details, see the user
documentation that comes with your printer.
•
•
USING BEST SHOT
B
Download from Www.Somanuals.com. All Manuals Search And Download.
109
■ Recording an Image with Old Photo
NOTE
When the camera is at an angle to the photograph you are
•
1. Press the shutter
recording, the shape of the photograph may appear
distorted in the recorded image. Auto keystone correction
corrects for this distortion, which means that a photograph
appears normal even if you record it at an angle.
button to shoot the
image.
• This displays a photograph
contour confirmation
screen and then saves the
original recorded image.
displaying the photograph contour confirmation screen, if
the camera is unable to find the contour of the
photograph.
■ Selecting the Old Photo Scene
1. In the REC mode, press [BS].
2. Use [S], [T], [W], and [X] to select the “Old
Photo” scene and then press [SET].
“Old Photo” will remain selected until you select a different
BEST SHOT scene.
2. Use [W] and [X] to select the candidate you
want to correct.
3. Use [S] and [T] to select “Trim” and then
press [SET].
This displays a cropping boundary on the monitor screen.
• To cancel the correction operation, select “Cancel”.
USING BEST SHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
110
4. Use the zoom button to
change the cropping
boundary to the
IMPORTANT!
• Digital zoom is disabled while recording with Old Photo.
However, you can use optical zoom.
When recording the image of a photograph, the camera will
not be able to recognize the shape of the photograph in the
following cases.
desired size.
•
– When part of the photograph extends outside of the
monitor screen
– When the subject is the same color as the background it
is placed upon
5. Use [S], [T], [W], and [X] to move the
selection boundary to the desired location and
then press [SET].
The camera will correct color automatically and save the
• The maximum Old Photo image size is 2M (1600 × 1200
pixels). When the camera is configured to record images
smaller than 2M (1600 × 1200 pixels), Old Photo will
produce images in accordance with the currently specified
image size.
corrected image.
• If you do not want a border around the resulting image,
select and area that is smaller than the original image.
• To cancel the restoration operation at any point and save
the image as-is, press [MENU].
• Under certain conditions, restored colors may not produce
the desired results.
USING BEST SHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
111
1. In the REC mode, press [BS].
Recording Snapshots into a Multi-
image Layout (Layout Shots)
You can create a multi-snapshot image by recording snapshots
into the frames that are arranged in a preset pattern. This lets
you create album-like arrangements of related images in a
single image. BEST SHOT scenes are available with three
frames and two frames.
2. Use [S], [T], [W], and [X] to select “Layout”,
and then press [SET].
3. Use [W] and [X] to select a background color.
4. Press the shutter
button to record the
first image.
• Layout (Two Images)
• Layout (Three Images)
The camera will record the
first snapshot and then get
ready for the next one.
Frame
USING BEST SHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
112
5. Press the shutter button again to record the
next snapshot.
IMPORTANT!
• Only the final multi-snapshot image is saved in camera
memory. The individual snapshots are not saved.
• The size of the multi-snapshot image for this operation is
fixed automatically at 7M (3072 × 2304 pixels).
While Layout Shot is being used, the setup of the camera is
changed automatically as shown below.
– ISO Sensitivity: Auto (fixed)
– AF Area: Spot (fixed)
• The following functions are disabled during Layout Shot.
– Digital Zoom
– Self-timer
• If you are shooting into a three-frame layout, press the
shutter button a third time to record the third image.
• Pressing [SET] during steps 4 or 5 of the above
procedure will toggle between the layout screen (the one
with the frames on it) and a screen that uses the entire
display area to compose the image you are shooting.
• To clear the currently recorded Layout images and restart
an ongoing Layout operation, press [MENU]. Next,
continue from step 4 above.
•
• You cannot save a multi-snapshot image unless there are
snapshots recorded in each of the available frames.
– Continuous Shutter
– Face Recognition
USING BEST SHOT
Download from Www.Somanuals.com. All Manuals Search And Download.
113
4. Press the shutter button all the way to record
Auto Tracking a Moving Subject (Auto
Framing)
the image.
• This will record the area enclosed within the cropping
boundary.
With auto tracking, a boundary area follows a moving subject,
making it easy to snap an image with the subject in the center.
IMPORTANT!
1. In the REC mode, press [BS].
• Only the part of the image within the cropping boundary will
be recorded.
• The image size for this operation is fixed automatically at
3M (2048 × 1536 pixels).
2. Use [S], [T], [W], and [X] to select “Auto
Framing”, and then press [SET].
• The following functions are disabled during Auto Framing.
– Timestamp
– Self-timer
– Continuous Shutter
– Face Recognition
• Auto Framing may not be able to follow a fast-moving
subject. If this happens, release the shutter button, re-align
the focus frame with the subject, and then half-press the
shutter again.
3. Align the focus frame
Focus frame
with the subject you
want to focus on and
then half-press the
shutter button.
• The focus frame and the
cropping boundary will
follow the subject as it
moves.
• Focusing of the subject
Cropping boundary
•
When shooting with “Auto Framing”, the image size is fixed
at 3M (2048 × 1536 pixels) and the Undeteriorated Image
continues to be performed
while you keep the shutter button half pressed.
USING BEST SHOT
B
Download from Www.Somanuals.com. All Manuals Search And Download.
114
ADVANCED SETTINGS
Changing the Focus Mode
Your camera provides you with the five focus modes described below. The initial factory default focus mode is Auto Focus.
Focus Mode Description
Auto Automatic focus when the shutter button is half-pressed.
Focus
Focus Range*
Auto adjustment
During movie recording, the Auto Focus mode is disabled. (Approximately 40 cm to
(1.3' to
))
• Minimum distance position varies with optical zoom.
Macro
(Close-up)
Used for close-up shooting. Macro Focus becomes fixed
focus while shooting a movie.
Auto adjustment
(10 cm to 50 cm (3.9" to 19.7"))
• Minimum distance position varies with optical zoom.
Pan
Fixed focus for relatively wide-range focusing. Use Pan
Fixed distance
Focus
Focus (PF) under conditions where Auto Focus is difficult. • Focus range varies with optical zoom position.
Infinity
Focus is fixed at infinity. Use this mode when shooting
scenery and other faraway images.
Infinity
Manual Focus is performed manually.
Focus
• Focus range varies with optical zoom factor.
Optical Zoom Factor
Range
1X
3X
10 cm to
60 cm to
(0.3' to
(2.0' to
)
)
* “Focus Range” indicates distance from the lens surface.
ADVANCED SETTINGS
B
Download from Www.Somanuals.com. All Manuals Search And Download.
115
Perform the following steps to change the focus mode.
Using Auto Focus
1. In the REC mode, press [MENU].
1. Align the monitor screen’s focus frame with
the subject you want to focus and then half-
press the shutter button.
2. On the “REC” tab, select “Focus” and then
press [X].
This camera will perform the focus operation.
You can tell if the image is in focus by checking the
operation lamp and the focus frame color.
3. Use [S] and [T] to
select the focus mode
setting you want and
then press [SET].
An icon appears on the
monitor screen to indicate
the current focus mode.
• See the following pages
of this section for details
about shooting with each
focus mode.
Focus mode Icon
Operation Lamp
Focus Frame
Status
Operation Lamp Focus Frame
Focusing
Complete
Lit Green
Green
Red
Not Focused
Flashing Green
ADVANCED SETTINGS
Download from Www.Somanuals.com. All Manuals Search And Download.
116
2. When the image is focused, press the shutter
Using Macro Focus
button the rest of the way to shoot.
1. Half-press the shutter button to focus the
image.
IMPORTANT!
The focus operation is the same as that for Auto Focus.
• During movie recording, the Auto Focus mode is disabled.
2. When the image is focused, press the shutter
NOTE
button the rest of the way to shoot.
•
When proper focusing is not possible because the subject
is closer than the Auto Focus range, the camera will switch
to the Macro Focus range automatically (Auto Macro).
Whenever you perform an optical zoom operation while
shooting with Auto Focus, a value will appear on the
monitor screen as shown below to tell you the focus range.
IMPORTANT!
• Use of the flash along with Macro Focus can cause the light
of the flash to become blocked, which can produce
unwanted lens shadows in your image.
•
• Macro Focus becomes fixed focus while shooting a movie.
Example:
cm –
*
will be replaced by the actual focus range value.
ADVANCED SETTINGS
Download from Www.Somanuals.com. All Manuals Search And Download.
117
NOTE
•
When Macro Focus cannot focus properly because the
subject is too far away, the camera will switch to the Auto
Focus range automatically (Auto Macro).
•
Whenever you perform an optical zoom operation while
shooting with Macro Focus, values will appear on the
monitor screen as shown below to tell you the focus range.
Example:
cm –
cm
*
will be replaced by the actual focus range values.
ADVANCED SETTINGS
Download from Www.Somanuals.com. All Manuals Search And Download.
118
Auto Focus and Macro Focus Shooting Tips
Changing the Auto Focus Area
Select this
setting:
To do this:
Half-pressing the shutter button focuses
the subject and also starts a focus
tracking operation that keeps the focus
frame on the subject as it moves.
Use the following procedure to change the metering area used
for Auto Focus (AF).
Tracking
1. In the REC mode, press [MENU].
2. On the “REC” tab, select “AF Area” and then
press [X].
3. Use [S] and [T] to select the setting you
want and then press [SET].
Select this
To do this:
setting:
Use a small area in the center of the
screen for metering
• This setting is best when you want to
Spot
When the shutter button is half-pressed,
have the camera automatically select one
or more of nine possible focus frames
Multi
• If the camera is able to focus on
multiple points, all applicable focus
frames turn green.
ADVANCED SETTINGS
Download from Www.Somanuals.com. All Manuals Search And Download.
119
NOTE
•
When you select “
Multi” as the focus area, nine focus
frames appear on the monitor screen. The camera will
automatically determine the optimum focus frame(s),
which will change to green on the monitor screen.
Spot /
Tracking
Multi
Focus Frame
Focus Frame
• “
Multi” cannot be used in the Face Recognition
• If you select “ Tracking” while using continuous
shutter or self-timer, subject will be tracked until image
recording starts.
ADVANCED SETTINGS
B
Download from Www.Somanuals.com. All Manuals Search And Download.
120
2. Keeping the shutter
button half-pressed,
re-compose the
Using Focus Lock
“Focus lock” is the name of a technique you can use when you
want to shoot an image in which the subject to be focused on is
not within the focus frame in the center of the screen.
image as you like.
•
When “
selected as the Auto
Tracking” is
• Use focus lock with “
Spot” or “
Tracking” focus.
1. Align the monitor
screen’s focus frame
with the subject you
want to focus on and
then half-press the
shutter button.
Subject to be focused on
Focus area, the focus
frame will move
automatically and follow the subject.
3. When the image is focused, press the shutter
button the rest of the way to shoot.
NOTE
Focus Frame
• Focus lock also causes exposure (AE) to be locked.
ADVANCED SETTINGS
Download from Www.Somanuals.com. All Manuals Search And Download.
121
Quick Shutter
4. Press the shutter button all the way down
without pausing.
If you press the shutter button all the way without waiting for
Auto Focus while Quick Shutter is turned on, the camera will
record the image using a high-speed focus operation that is
much faster than normal Auto Focus. This helps to avoid
missing a special moment while you wait for the camera to
Auto Focus.
Pressing the shutter button all the way without pausing at
the halfway type will record with Quick Shutter, without
performing the normal Auto Focus operation.
IMPORTANT!
• Some images may be out of focus when Quick Shutter is
used.
• Quick Shutter will not work when you are using a very
high zoom factor. In this case, you should use Auto Focus
instead.
1. In the REC mode, press [MENU].
2. On the “REC” tab, select “Quick Shutter” and
then press [X].
3. Use [S] and [T] to select the setting you
want and then press [SET].
To do this:
Select this setting:
Turn on Quick Shutter
Turn off Quick Shutter
On
Off
ADVANCED SETTINGS
Download from Www.Somanuals.com. All Manuals Search And Download.
122
Using Fixed Focus (Pan Focus)
Using Manual Focus
Pan Focus (PF) fixes focus for a relatively wide focus range,
which means you can shoot without waiting for the Auto Focus
operation to finish.
With Manual Focus, the camera
automatically enlarges the
subject on the monitor screen,
which helps you manually adjust
focus. Manual focus can be used
for shoot such images as moving
trains. Before the train arrives,
manually focus on an electric
pole or some other object. Then
when the train passes the object
you focused on, you can shoot
without worrying about focus.
1. When you are ready to shoot, press the
shutter button all the way, without pausing.
Yellow Boundary
Using Infinity Focus
As its name suggests, Infinity Focus fixes focus at infinity (
Use this mode when shooting scenery and other faraway
subjects. Infinity Focus also comes in handy when shooting from
a car or train window, or when shooting scenery or other
subjects that are difficult to focus properly with Auto Focus.
).
1. While Manual focus is selected as the focus
mode, compose the image on the monitor
screen so the subject you want to focus on is
within the yellow boundary.
1. While Infinity Focus is selected as the focus
mode, press the shutter button to shoot.
ADVANCED SETTINGS
Download from Www.Somanuals.com. All Manuals Search And Download.
123
2. Use [W] and [X] to focus the image, as you
view the results on the monitor screen.
At this time the image that is within the boundary will enlarge
and fill the monitor screen, which aids in focusing.
NOTE
• Whenever you perform an optical zoom operation (page
on the monitor screen as shown below to tell you the
focusing range.
For this:
Press this button:
Example: MF
cm –
Closer focus
More distant focus
[W]
[X]
*
will be replaced by the actual focus range values.
IMPORTANT!
• The monitor screen will return to step 1 if you do not
perform any operation for about two seconds.
•
While Manual Focus is selected as the focus mode, the [W]
and [X] keys are used to adjust the focus setting. Any other
functions assigned to the [W] and [X] keys with Key
the keys during manual focus.
3. Press the shutter button to shoot.
ADVANCED SETTINGS
Download from Www.Somanuals.com. All Manuals Search And Download.
124
3. Use [W] and [X] to adjust the exposure
compensation value.
Correcting Image Brightness (EV
Shift)
You can manually adjust an image’s exposure value (EV value)
before shooting it. This feature helps to achieve better results
when shooting a backlit subject, a strongly lit subject indoors, or
a subject that is against a dark background.
[X]: Increases the EV value. A higher EV value is best used
for light-colored subjects and backlit subjects.
* Increasing the EV value also works well with the
BEST SHOT “Backlight” scene.
Exposure Compensation Value: –2.0EV to +2.0EV
Unit: 1/3EV
1. In the REC mode, press [SET].
2. Use [S] and [T] to
select the third option
from the bottom in the
operation panel (EV
Shift) .
[W]: Decreases the EV value. A lower EV value is best for
dark-color subjects and for shooting outdoors on a
clear day.
EV Shift Value
To cancel exposure compensation, adjust the value until it
becomes 0.0.
ADVANCED SETTINGS
Download from Www.Somanuals.com. All Manuals Search And Download.
125
4. After the EV value is the way you want, press
[SET] to apply it.
Controlling White Balance
Shooting on a cloudy day can give your subject a blue cast,
while shooting under white fluorescent lighting can give your
subject a green cast. White balance corrects for different types
of lighting so the colors in your images always look natural.
The exposure compensation value you set remains in effect
until you change it.
IMPORTANT!
•
When shooting under very dark or very bright conditions,
you may not be able to obtain satisfactory results even
after performing exposure compensation.
1. In the REC mode, press [SET].
2. Use [S] and [T] to select the fourth option
from the bottom in the operation panel (White
Balance).
NOTE
• Performing an EV shift operation while using multi-pattern
3. Use [W] and [X] to select the white balance
metering will cause the metering mode to switch
automatically to center weighted metering. The metering
mode will return to multi-pattern metering when you change
• You can use the key customization feature to configure the
This comes in handy when adjusting exposure
compensation while viewing the on-screen histogram
setting you want and then press [SET].
ADVANCED SETTINGS
Download from Www.Somanuals.com. All Manuals Search And Download.
126
Select this
setting:
NOTE
When “Auto” is selected for the white balance setting, the
To do this:
•
camera automatically determines the white point of the
subject. Certain subject colors and light source conditions
can cause problems when the camera tries to determine
the white point, which makes proper white balance
adjustment impossible. If this happens, select the white
balance setting that matches you shooting conditions
(Daylight, Overcast, etc.)
• You can use the key customization feature to configure the
[W] and [X] buttons so they control the white balance
Let the camera adjust white balance
automatically
AWB Auto WB
Daylight
Shoot outdoors on a clear day
Shoot outdoors on an overcast rainy day, in
the shade, etc.
Overcast
Shoot in the shadow of a building, in the
shade of trees, etc. on a clear day
Shade
Suppress color cast when shooting under
white or day white fluorescent lighting
Day White
N
Fluorescent
• To select “Auto” with the control key (when the control key
is configured to select the auto white balance setting),
scroll through the settings until “ AWB ” appears on the
monitor screen.
Suppress color cast when shooting under
daylight fluorescent lighting
Daylight
Fluorescent
D
Suppress the appearance of light bulb
lighting
Tungsten
Manually adjust white balance to suit a
particular light source
MWB Manual WB
ADVANCED SETTINGS
Download from Www.Somanuals.com. All Manuals Search And Download.
127
4. Under the lighting conditions you plan to use
when shooting, point the camera at a blank
white piece of paper so it fills the entire
monitor screen and then press the shutter
button.
■ Configuring the White Balance Setting
Manually
Under complex lighting conditions, the preset white balance
settings may not be able to produce natural looking colors.
When this happens, you can configure the white balance setting
manually for particular lighting conditions. Note that you will
need to have a plain white sheet of paper on hand when
performing the following procedure.
White sheet of paper
1. In the REC mode, press [SET].
2. Use [S] and [T] to select the fourth option
from the bottom in the operation panel (White
Balance).
The camera will adjust white balance settings for the current
conditions, and display “Complete” when it is finished.
3. Use [W] and [X] to select “
MWB
Manual WB”.
This will display the subject that the lens is aimed at on the
monitor screen using the current manual white balance
settings. If you want to use the current settings, jump
directly to step 5.
5. Press [SET] to register the white balance
settings and return to the shooting screen.
• The white balance setting is retained even if you turn off
the camera.
ADVANCED SETTINGS
Download from Www.Somanuals.com. All Manuals Search And Download.
128
3. Use [W] and [X] to select the setting you want
Specifying ISO Sensitivity
and then press [SET].
ISO sensitivity is a value that expresses sensitivity to light. A
larger value indicates higher sensitivity, which is better for
shooting when available lighting is dim. If you want to use faster
shutter speeds, you should use a higher ISO sensitivity value.
Under certain conditions, a fast shutter speed in combination
with a high ISO sensitivity setting can cause digital noise, which
makes an image appear rough. For clean, good-quality images,
use the lowest possible ISO sensitivity setting.
To shoot with this level of
sensitivity:
Select this
setting:
Automatically selected by camera.
Low
Auto
ISO 50
ISO 100
ISO 200
ISO 400
ISO 800
1. In the REC mode, press [SET].
High
2. Use [S] and [T] to select the fifth option from
the top in the operation panel (ISO Sensitivity).
IMPORTANT!
• Using flash with high ISO sensitivity can cause problems
with subjects that close to the camera.
• “Auto” ISO sensitivity always is used for movies, regardless
of the current ISO sensitivity setting.
• You can use the key customization feature to configure the
[W] and [X] buttons so they control the ISO sensitivity
ADVANCED SETTINGS
Download from Www.Somanuals.com. All Manuals Search And Download.
129
Center Weighted
Specifying the Metering Mode
The metering mode determines what part of the subject is
metered for exposure.
Center weighted metering concentrates on the
center of the focus area to measure light. Use
this metering method when you want to exert
some control over exposure, without leaving
settings totally up to the camera.
1. In the REC mode, press [MENU].
2. On the “Quality” tab, select “Metering” and
then press [X].
Spot
Spot metering takes readings at a very small
area. Use this metering method when you
want exposure to be set according to the
brightness of a particular subject, without
being affected by surrounding conditions.
3. Use [S] and [T] to select the setting you want
and then press [SET].
Multi (Multi Metering)
Multi-pattern metering divides the image into
sections and measures the light in each
section for a balanced exposure reading. The
camera automatically determines shooting
conditions according to the measured lighting pattern, and
makes exposure settings accordingly. This type of metering
provides error-free exposure settings for a wide range of
shooting conditions.
ADVANCED SETTINGS
Download from Www.Somanuals.com. All Manuals Search And Download.
130
IMPORTANT!
Reducing the Effects of Overexposure
and Underexposure
You can use the procedure below to expand the dynamic range,
which makes it possible to capture the bright areas of an image
while reducing the chance of overexposure and underexposure.
When shooting a subject that is back lit, for example, an
expanded dynamic range minimizes overexposure and
underexposure.
• The metering mode will change to “Center Weighted”
anything other than 0.0 while “Multi” is selected. The
metering mode will change back to “Center Weighted”
when the EV shift value is changed back to 0.0.
When “Multi” is selected as the metering mode, the
icon will not be displayed on the monitor screen when you
•
1. In the REC mode, press [MENU].
NOTE
2. On the “Quality” tab, select “Dynamic Range”
and then press [X].
• You can use the key customization feature to configure the
[W] and [X] buttons so they control the metering mode
ADVANCED SETTINGS
Download from Www.Somanuals.com. All Manuals Search And Download.
131
3. Use [S] and [T] to select the setting you want
Enhancing Human Skin Textures
You can use the procedure below to reduce digital noise from
and then press [SET].
Select this
When you want to do this:
setting:
human skin in the recorded image and enhance its texture.
1. In the REC mode, press [MENU].
Apply Dynamic Range to a greater
Expand +2
extent than “Expand +1”
2. On the “Quality” tab, select “Portrait Refiner”
and then press [X].
Suppress overexposure and
Expand +1
underexposure
3. Use [S] and [T] to select the setting you want
Do not suppress overexposure and
underexposure
Off
and then press [SET].
Select this
When you want to do this:
setting:
• You can also correct the dynamic range of a photograph
Enhance skin texture more than “Noise
Noise Filter +2
Filter +1”
Enhance skin texture
Noise Filter +1
Off
Turn off skin texture enhancement
ADVANCED SETTINGS
Download from Www.Somanuals.com. All Manuals Search And Download.
132
Using the Camera’s Color Filter
Effects
The camera’s filter feature lets you add color tints to your images
as you shoot them. The color effect look just like what you would
get by installing a color filter on the lens of the camera.
Controlling Image Sharpness
Use the following procedure to adjust the sharpness of subject
outlines in your images.
1. In the REC mode, press [MENU].
2. On the “Quality” tab, select “Sharpness” and
then press [X].
1. In the REC mode, press [MENU].
2. On the “Quality” tab, select “Color Filter” and
then press [X].
3. Use [S] and [T] to select the setting you want
and then press [SET].
You can specify one of five sharpness settings from +2
(sharpest) to –2 (least sharp).
3. Use [S] and [T] to select the setting you want
and then press [SET].
Available filter settings are: Off, B/W, Sepia, Red, Green,
Blue, Yellow, Pink, and Purple
ADVANCED SETTINGS
Download from Www.Somanuals.com. All Manuals Search And Download.
133
i
Controlling Color Saturation
Use the following procedure to adjust the saturation of colors in
Adjusting Image Contrast
Use the following procedure to adjust the contrast of your
your images.
images.
1. In the REC mode, press [MENU].
1. In the REC mode, press [MENU].
2. On the “Quality” tab, select “Saturation” and
then press [X].
2. On the “Quality” tab, select “Contrast” and
then press [X].
3. Use [S] and [T] to select the setting you want
and then press [SET].
3. Use [S] and [T] to select the setting you want
and then press [SET].
You can specify one of five saturation settings from +2
(most saturated) to –2 (least saturated).
You can specify one of five contrast settings from +2 (most
contrast between light and dark) to –2 (least contrast
between light and dark).
ADVANCED SETTINGS
Download from Www.Somanuals.com. All Manuals Search And Download.
134
IMPORTANT!
Date Stamping Snapshots
• Even if you do not stamp the date and/or time with
Timestamp, you can do so later using the DPOF function
• Once date and time information is stamped in a print, it
cannot be edited or deleted.
You can have the snapshot’s recording date only, or date and
time stamped in the lower right corner of the image.
1. In the REC mode, press [MENU].
2. On the “Set Up” tab, select “Timestamp” and
then press [X].
Month/Day format of the date.
• The recording date and time are determined in accordance
snapshot is recorded.
• Digital zoom is not supported while date stamping is turned
on.
• Date stamping is not supported for the following types of
images.
– Some BEST SHOT images (Auto Framing, Business
cards and documents, White board, etc., Old Photo, ID
Photo)
3. Use [S] and [T] to select the setting you want
and then press [SET].
Example: December 24, 2007, 1:25 p.m.
Select this
To do this:
setting:
Display the date only (2007/12/24)
Date
Display the date and time (2007/12/24
1:25pm)
Date&Time
Off
Display nothing
ADVANCED SETTINGS
Download from Www.Somanuals.com. All Manuals Search And Download.
135
■ How to Use the Histogram
Using the On-screen Histogram to
Check Exposure
The on-screen histogram that provides a graphic representation
of the current exposure of the image. You can also display the
histogram in the PLAY mode for information about the exposure
levels of images.
A histogram is a graph that represents the lightness of an image
in terms of the number of pixels. The vertical axis indicates the
number of pixels, while the horizontal axis indicates lightness. If
the histogram appears too lopsided for some reason, you can
use EV shift to move it left or right in order to achieve better
balance. Optimum exposure can be achieved by EV shifting so
the graph is as close to the center as possible. For snapshots,
you can even display individual histograms for R (red), G
(green), and B (blue). These lines can be used to determine
whether there is too much or too little of each of the color
components in an image.
Histogram
Example Histograms
1. Press [S] (DISP) as many times as necessary
A histogram towards the left side
results when the overall image is
dark. A histogram that is too far to the
left may result in “black out” of the
dark areas of an image, as shown in
the nearby image.
NOTE
• You can use key customization to configure the [W] and [X]
buttons so they control the EV shift setting. Then you can
perform EV shift while viewing the results on the on-screen
ADVANCED SETTINGS
Download from Www.Somanuals.com. All Manuals Search And Download.
136
A histogram towards the right side
results when the overall image is
light. A histogram that is too far to the
right may result in “white out” of the
light areas of an image, as shown in
the nearby image.
IMPORTANT!
• A centered histogram does not necessarily guarantee
optimum exposure. If you intentionally want to over expose
or under expose the image, you may not want a centered
histogram.
• Due to the limitations of exposure compensation, you may
not be able to achieve an optimum histogram configuration.
• Use of the flash and certain shooting conditions can cause
the histogram to indicate exposure that is different from the
actual exposure of the image when it was shot.
An overall well-balanced histogram
results when the overall image is at
optimal lightness.
ADVANCED SETTINGS
Download from Www.Somanuals.com. All Manuals Search And Download.
137
When this function is
assigned:
You can use [W] and [X] to do
this:
Other Useful Recording Functions
The following functions are also available in the REC mode to
help make your digital image more efficient and enjoyable.
• Assign functions to the [W] and [X] keys
• Display an on-screen grid for easy image composition
• Review an image you just recorded
Change the ISO sensitivity
setting
ISO (page 129)
Select the self-timer time
• Register initial power up settings
• Reset settings
1. In the REC mode, press [MENU].
2. On the “REC” tab, select “L/R Key”, and then
press [X].
Using Key Customize to Assign
Functions [W] and [X]
3. Use [S] and [T] to select the function you
want to assign and then press [SET].
After you assign a function, you can control its setting using
the [W] and [X] keys.
Key Customize lets you assign any one of the five functions
listed below to the [W] and [X] keys. Once you do, you will be
able to use the assigned functions while shooting snapshots or
movies, without going through the menus. For details about
each of the functions, see the referenced page numbers.
Selecting “Off” leaves the [W] and [X] keys with no function
assigned.
When this function is
assigned:
You can use [W] and [X] to do
this:
Metering (page 130)
Change the metering setting
Perform EV shifting for
exposure compensation
Change the white balance
setting
ADVANCED SETTINGS
Download from Www.Somanuals.com. All Manuals Search And Download.
138
Displaying an On-screen Grid
The on-screen grid can be displayed on the REC mode monitor
Displaying the Image You Just Recorded
(Image Review)
When you purchase your camera, it is initially configured with
the Image Review feature turned on. Image Review displays the
image you just recorded so you can check it.
screen for easy alignment when composing images.
1. In the REC mode, press [MENU].
2. On the “REC” tab, select “Review” and then
press [X].
1. In the REC mode, press [MENU].
3. Use [S] and [T] to select the setting you want
and then press [SET].
2. On the “REC” tab, select “Grid” and then
press [X].
To configure the camera to do this
after an image is recorded:
Select this
setting:
3. Use [S] and [T] to select the setting you want
Display the image for about one second On
and then press [SET].
Nothing
Off
To do this:
Select this setting:
Display the grid
Hide the grid
On
Off
ADVANCED SETTINGS
Download from Www.Somanuals.com. All Manuals Search And Download.
139
Using Icon Help
IMPORTANT!
Icon help displays guidance text about an icon when you select it
• Icon help text is displayed for the following functions:
Recording mode, metering, flash mode, white balance, self-
timer, EV shift. Note, however, that metering, white balance,
self-timer and EV shift icon help text appears only when
“Metering”, “White Balance”, “Self-timer” or “EV shift”
respectively is assigned to the [W] and [X] keys with the key
• The icons listed below do not appear on the display while
icon help is turned off.
– Flash mode
AWB
– White balance
– Metering mode
icon (page 126)
1. In the REC mode, press [MENU].
2. On the “REC” tab, select “Icon Help” and then
press [X].
3. Use [S] and [T] to select the setting you want
and then press [SET].
Select this
To do this:
setting:
Display icon help text next to the icon of
On
a function when you select the function
Turn off icon help
Off
ADVANCED SETTINGS
Download from Www.Somanuals.com. All Manuals Search And Download.
140
4. Use [S] and [T] to select the setting you want
Using Mode Memory to Configure Power
On Default Settings
and then press [SET].
You can configure the camera so it saves certain settings in
“mode memory” whenever it is turned off, and restores the
settings the next time you turn the camera back on. This keeps
you from having to configure the camera each time you turn it off
and on.
Select this
To do this:
setting:
Save the current setting when the
camera turned off, and restore it when
the camera is turned back on
On
Off
See step 4 of the setting procedure below for information about
the settings you can save with mode memory.
Restore the optimum default when the
camera is turned on
1. In the REC mode, press [MENU].
2. On the “REC” tab, select “Memory” and then
press [X].
3. Use [S] and [T] to select the item you want to
configure and then press [X].
ADVANCED SETTINGS
Download from Www.Somanuals.com. All Manuals Search And Download.
141
*1 “On” restores the selected BEST SHOT scene when the
camera is turned back on. “Off” exits BEST SHOT when the
camera is turned off.
Mode
Memory On
Setting
Mode Memory Off
Exits BEST SHOT
when camera is
turned off.
*2 Optical zoom position only.
BEST SHOT*1
IMPORTANT!
Flash
Auto
Auto
Auto
Auto
Spot
Multi
Off
• Turning the camera off while mode memory for the BEST
SHOT mode is on will restore the settings of the BEST
SHOT scene what was selected when you last turned off
the camera. This is true, regardless of any of the mode
memory on/off settings of each individual setting, except for
Zoom Position.
Focus
White Balance
ISO
AF Area
Setting at
power off
Metering
Self-timer
Flash Intensity
Digital Zoom
0
On
Focus mode before
manual focus was
selected.
MF Position
Zoom Position*2
Full wide
ADVANCED SETTINGS
Download from Www.Somanuals.com. All Manuals Search And Download.
142
Resetting the Camera to Its Initial
Factory Defaults
Use the following procedure when you want to return to the
camera to its initial factory default settings, which are the ones
that are configured when you first purchase the camera. See
setting for each menu item.
IMPORTANT!
• The following are not initialized when you reset the camera
– Home Time setup
– World Time setup
– Adjust
– Date Style
– Language
1. Press [MENU].
– Video Out
2. On the “Set Up” tab, select “Reset” and then
press [X].
3. Use [S] and [T] to select “Reset” and then
press [SET].
• To cancel the procedure without resetting, select
“Cancel”.
ADVANCED SETTINGS
Download from Www.Somanuals.com. All Manuals Search And Download.
143
VIEWING SNAPSHOTS AND MOVIES
• The file type icon that appears at the top of the monitor
screen depends on the type of file (snapshot, movie,
audio only, etc) that is currently displayed.
Viewing a Snapshot
Use the following procedure to view snapshots on the camera’s
monitor screen.
–
–
–
1. Press [
] to enter the PLAY
mode.
information and view the image alone.
2. Use [W] and [X] to scroll between images.
Press [X] to scroll forward and [W] to scroll back.
[
]
[X]
[X]
• This will display one of the snapshots in memory, along with
some information about the settings used to shoot it (page
245).
[W]
[W]
File Type
Folder/File Names
Image Quality
Image Size
Date and Time
VIEWING SNAPSHOTS AND MOVIES
Download from Www.Somanuals.com. All Manuals Search And Download.
144
Listening to the Audio of an Audio
Snapshot
You can use the following procedure to play the audio of an
audio snapshot. An audio snapshot is indicated by the “
type icon.
NOTE
• Holding down [W] or [X] scrolls at high speed.
• The image that initially appears when scrolling may appear
to be a bit rough at first, but it will soon be replaced by an
image with better definition. Note that if you copy an image
from another type of digital camera, only a rough image
may be shown on the monitor screen.
” file
1. Enter the PLAY mode
and then use [W] and
[X] to display the
audio snapshot
To switch to the REC mode
Press [
].
whose audio you want
to play.
2. Press [SET] to play the snapshot’s audio from
the camera’s built-in speaker.
VIEWING SNAPSHOTS AND MOVIES
Download from Www.Somanuals.com. All Manuals Search And Download.
145
Audio Playback Controls
To do this:
Viewing a Movie
Use the following procedure to view a movie on the camera’s
Do this:
Fast forward or fast reverse
playback
monitor screen.
Hold down [X] or [W].
1. Enter the PLAY mode and then use [W] and
[X] to display the movie you want to play.
• Check the file type icon. The file type icon of a movie is
Pause or restart playback
Press [SET].
Press [T] and then use [S]
and [T].
Adjust volume
“
Change on-screen indicators
Press [S] (DISP).
File Type
Folder Name/File Name
Recording Time
Stop playback
Press [MENU].
You can adjust volume while playback is in progress or paused
only.
Quality
The film-like frame that appears on the monitor screen
indicates that this is an image from a movie.
2. Press [SET] to start playback.
• The monitor screen will return to the selection screen in
step 1 after the end of the movie is reached.
VIEWING SNAPSHOTS AND MOVIES
Download from Www.Somanuals.com. All Manuals Search And Download.
146
To switch to the REC mode
Press [ ].
To do this:
Do this:
Zoom in up to 4.5X
•
While an image is zoomed, you can use
[S] [T] [W] and [X] to move around and
view the parts of the image that do not
fit on the monitor screen.
Movie Playback Controls
To do this:
Press the zoom
button (
).
Do this:
Fast forward or fast reverse playback.
• Each press of either button increases
the speed of the fast forward or fast
reverse operation up to three steps.
Hold down [X] or
[W].
Stop playback
Press [MENU].
IMPORTANT!
Return from fast forward/fast reverse to
normal playback
• Playback may not be possible for movies not recorded with
this camera.
Press [SET].
Press [SET].
Pause or restart playback
When paused, scroll forward or back
frame-by-frame
• Hold down either button to scroll non-
stop.
Press [X] or [W].
Adjust volume
• Volume can be adjusted only while
movie playback is in progress.
Press [T] and
then use [S] and
[T].
Toggle on-screen indicators on or off
Press [S] (DISP).
VIEWING SNAPSHOTS AND MOVIES
Download from Www.Somanuals.com. All Manuals Search And Download.
147
Playing Back a Movie with Anti Shake
Playing a Slideshow on the Camera
The slideshow feature lets you play the files stored in memory in
sequence, automatically.
You can configure the slideshow so it plays the files the way you
want.
Use the following procedure when you want to play back a
movie with Anti Shake. Anti Shake is particularly useful when
you have the camera connected to a TV for viewing, since the
effects of camera movement are more evident on a big screen.
1. In the PLAY mode, press [MENU].
1. In the PLAY mode, press [MENU].
2. Select the “PLAY” tab, select “
Shake”, and then press [X].
Anti
2. On the “PLAY” tab, select “Slideshow” and
then press [X].
3. Use [S] and [T] to select “On”, and then
3. Configure the slideshow settings.
Use [S] and [T] to select an item and then configure it as
described below.
press [SET].
•
When Anti Shake is turned on, the area of the monitor
screen used for playback is slightly smaller than normal.
4. After the setting is the way you want, press
[SET].
VIEWING SNAPSHOTS AND MOVIES
Download from Www.Somanuals.com. All Manuals Search And Download.
148
Images
• All images: Includes all snapshots, movies,
and audio in memory.
Effect
Use [S] and [T] to select the effect you want.
• Pattern 1, 2, 3, 4, 5: Plays background
music and applies an image change effect.
– Pattern 1 through 4 use the same special
effects but each use different background
music. Pattern 5 uses different effects
from patterns 1 through 4.
(Select the
files you
want to
include in
the
(Select a
special
effect.)
•
Only: Includes snapshots and audio
snapshots only.
Only: Includes movies only.
•
• One Image: Includes only one specific
image (selected using [W] and [X]).
• Favorites: Includes snapshots in the
slideshow.)
– Selecting “Pattern 5” changes the
“Images” setting to “
Only” and
disables the “Interval” setting.
• Off: No background music plays and no
image change effect is performed.
The current effect setting is disabled
automatically in following cases.
Time
Use [W] and [X] to select one of the following
(Specify the times (in minutes): 1, 2, 3, 4, 5, 10, 15, 30, 60.
time of the
slideshow,
from start to
finish.)
– When the “Images” setting is “
“One Image”, or “Favorites”.
Only”,
Interval
(Select the
interval
between
slides.)
Use [W] and [X] to select a value from 1 to 30
seconds, or “MAX”.
– When the “Interval” setting is “MAX”, one
second, or two seconds.
– When the slideshows changes to or from
a movie file or a voice recording file.
– If you specify a value from 1 to 30
seconds, images change at the specified
interval, but the audio portion of movies
and audio snapshots will continue to play
until the end, regardless of the interval
setting.
– When “MAX” is selected, only the first
frame of each movie is displayed, without
any playback of the audio.
VIEWING SNAPSHOTS AND MOVIES
B
Download from Www.Somanuals.com. All Manuals Search And Download.
149
4. Use [S] and [T] to select “Start” and then
press [SET] to start the slideshow.
The slideshow is performed in accordance with the settings
you configured above.
IMPORTANT!
• All button operations are disabled while the slideshow is
switching from one image to another. Wait until an image is
stopped on the display before performing a button
operation. If a button does not work, wait a bit and try
again.
• You can also scroll through images during a slideshow by
pressing [X] (forward) and [W] (back). Note that this
operation is not possible when “Pattern 5” is selected for
the “Effect” setting.
• During audio playback, you can adjust volume by
pressing [T] and then using [S] and [T].
NOTE
• Selecting a movie when “One Image” is selected for
“Images” and then selecting a movie for the slideshow will
cause the movie to play back repeatedly within the time
specified by the slideshow “Time” setting.
• In image copied from a computer or an image recorded
with a different type of digital camera may remain on the
screen longer than the time specified by “Interval”.
To stop a slideshow
Press [SET]. This will return to the PLAY mode.
• Pressing [MENU] instead of [SET] stops the slideshow and
returns to the menu screen.
• Pressing [
] instead of [SET] stops the slideshow and
switches to the REC mode.
VIEWING SNAPSHOTS AND MOVIES
Download from Www.Somanuals.com. All Manuals Search And Download.
150
Transferring Background Music to the Camera
■ Changing the Background Music
You can change from the built-in background music that plays
when you execute “Effect” to other background music.
You can select background music after its file has been saved to
the memory card or the camera’s built in memory.
1. Connect the camera to your computer (pages
● Supported File
File Types: IMA ADPCM format WAV files
Sampling Frequencies: 22.05 kHz/44.1 kHz
Audio: monaural
• If you save a background music file to a memory card,
load the card into the camera.
● Number of Files: 9
2. Perform one of the following operations to
● File names: SSBGM001.WAV to SSBGM009.WAV
• Store the music files on your computer using the above
names.
open the memory card or built-in memory.
•
Windows
Based on your operating system, perform one of the
following steps.
1
IMPORTANT!
Windows XP users: Click “Start” and then “My
Computer”.
Windows Vista users: Click “Start” and then
“Computer”.
Windows 2000/Me/98SE/98 users: Double-click “My
Computer”.
• Regardless of which effect pattern is selected, the
background music is looped.
• Depending on the BGM file format, some background
music data may not be playable.
Double-click “Removable Disk”.
Your computer recognizes the memory card loaded in
the camera (or built-in memory if there is no card) as a
removable disk.
2
• Macintosh
Double-click the camera’s drive icon.
1
Your computer recognizes the memory card loaded in
the camera (or built-in memory if there is no card) as a
drive.
VIEWING SNAPSHOTS AND MOVIES
Download from Www.Somanuals.com. All Manuals Search And Download.
151
3. Create a folder named “SSBGM”.
IMPORTANT!
• The background music files will be loop played in
sequence.
4. Double-click the “SSBGM” folder you created
and copy the background music file to it.
• If both the memory card loaded in the camera and the
camera’s built-in memory contain background music files,
the files on the memory card are played.
• See the user documentation that comes with your
computer for information about moving, copying, and
deleting files.
5. Disconnect the camera from the computer
● Folder Structure
Memory Card or Built-in Memory
DCIM
SSBGM
(Background Music Folder)
SSBGM001.WAV (Background Music File)
SSBGM002.WAV (Background Music File)
VIEWING SNAPSHOTS AND MOVIES
Download from Www.Somanuals.com. All Manuals Search And Download.
152
•
When connecting the bundled AV cable to the camera’s
USB/AV port, insert the plug into the port until you feel it
click securely into place. Failure to insert the plug fully
can result in poor communication or malfunction of the
connected components.
Viewing Camera Images on a TV
Use the procedure below to view snapshots and movies on a TV
screen.
1. Use the AV cable that comes with the camera
• Some metal of the plug is visible even
when the plug is inserted correctly.
to connect the camera to a TV.
AV Cable
USB/AV
connector
Yellow
White
2. Turn on the TV and select its video input
mode.
If the TV has more than one video input, select the one
where the camera is connected.
Video
Audio
TV
3. Press [
] (PLAY) to turn on the camera and
enter the PLAY mode.
VIDEO IN Jack
(Yellow)
When the camera turns on in the PLAY mode, an image will
appear on the TV screen. The camera’s monitor screen will
not turn on.
AUDIO IN Jacks
(White)
• Pressing [ON/OFF] or [
] (REC) will not turn on the
camera.
Making sure that the T mark on the camera is aligned
with the S mark of the AV cable plug, connect the cable to
the camera.
VIEWING SNAPSHOTS AND MOVIES
Download from Www.Somanuals.com. All Manuals Search And Download.
153
|