MA0505-EA
Operation Guide ID-15
ILLUSTRATION
GENERAL GUIDE
1 ALM/SNZ button
• Pressing this button while the alarm is sounding stops the alarm.
2 Alarm Mode selector
SNZ: Snooze alarm on
ON: Alarm on
OFF: Alarm off
ALM/SNZ
INVALID
ON SNZ
3 + / – buttons
OFF
RESET SET
Use these buttons to change the alarm time or the setting that is flashing on the display.
INVALID
°C/°F
4 °C/°F button
Press this button to toggle the temperature units between Celsius and Fahrenheit.
5 SET button
Use this button when setting the current time.
6 RESET button
Press this button to reset the clock after replacing its batteries.
• Buttons marked “INVALID” have no function.
USING THE CLOCK
1. Press the SET button (5) to cycle through the setting screens as shown below.
ALM/SNZ
INVALID
ON SNZ
Normal Timekeeping Screen
ALM/SNZ
I
ON SNZ
OFF
RESET SET
OFF
RESET SET
INVALID
°C/°F
INVALID
°C/°F
Year Setting Screen
Month and Day
Setting Screen
Time Setting Screen
12-hour/24-hour
Timekeeping Screen
1cm
O
N
S
N
Z
ALM/SNZ
INVALID
2. While the screen you want is displayed, use the + and
– buttons (3) to change the flashing digits.
• Holding down + or – changes the flashing digits at high
speed.
OFF
RESET SET
INVALID
°C/°F
ALM/SNZ
INVALID
O
N
S
N
Z
OFF
RESET SET
• You can set the year in the range of 2000 to 2039. The
day of the week is set automatically in accordance with
the date setting.
• Pressing + or – while the Time Setting Screen is on the
display causes the seconds count to be reset to 00.
• Each press of + or – while the 12-hour/24-hour
Timekeeping Screen is on the display toggles between
12-hour and 24-hour timekeeping.
INVALID
°C/°F
+
–
Press to
Press to
increase
the flashing
digits.
decrease
the flashing
digits.
• A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the
clock.
• Depending on the clock model, its configuration may differ somewhat from that shown in the illustration.
Alarm Off
Snooze Alarm On
3. After making the settings you want, use the SET button (5) to display the Normal Timekeeping Screen.
• The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for
about three minutes without performing any operation.
PM
indicator
Current time
(Hour, minutes,
seconds)
Snooze on
indicator
Date
(month - day)
Day of the week
Current temperature
Alarm time
Alarm on indicator
1
Download from Www.Somanuals.com. All Manuals Search And Download.
|