Cary Audio Design Stereo Amplifier CAD 805AE User Manual

o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
CAD-805AE  
Mono Power Amplifier  
NOTE: Before installing your new component, please read this manual  
carefully as it will inform you of the product specifications, proper  
installation and correct operating procedures for your unit. Also included  
in this manual are guidelines on how to service and care for your new  
Cary Audio Design product.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
WARNING: To reduce the risk of fire or electric shock, do  
not expose this appliance to rain or moisture. The lightning  
flash with arrowhead symbol within an equilateral triangle is  
intended to alert the user to the presence of un-insulated  
dangerous voltage within the product’s enclosure that may  
be of sufficient magnitude to constitute a risk of electric  
shock to persons.  
CAUTION: To reduce the risk of electric shock, do not remove the cover. There are no user serviceable parts inside.  
Please refer to qualified personnel for service.  
ALERT: The exclamation point within an equilateral triangle is intended to alert the user of the presence of important  
operating and maintenance (servicing) instructions in the literature accompanying the component.  
1. READ ALL INSTRUCTIONS: All the safety and operating instructions of your Cary Audio equipment should be read  
before power is applied to the equipment.  
2. RETAIN OWNER'S MANUAL: These safety and operating instructions should be retained for future reference.  
3. HEED WARNING: All warnings on the unit and in the operating instructions should be adhered to.  
4. FOLLOW INSTRUCTIONS: All operating and use instructions should be followed.  
5. CLEANING: Unplug the unit from the wall outlet before cleaning. The unit should be cleaned only as recommended  
by the manufacturer.  
6. ATTACHMENTS: Do not use attachments not recommended by the unit manufacturer as they may cause hazards.  
7. WATER AND MOISTURE: Do not use the unit near water - for example, near a bath tub, wash bowl, kitchen sink,  
or laundry tub; in a wet basement; or near a swimming pool.  
8. ACCESSORIES: Do not place the unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall,  
causing serious injury to a child, an adult, or damage to the unit. Mounting of the unit should follow the  
manufacturer's instructions and should use a mounting accessory recommended by the manufacturer.  
9. VENTILATION: Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the  
unit and to protect it from overheating. These openings must not be blocked or covered. The top or bottom panel  
openings should never be blocked by placing the unit on a bed, sofa, rug, or other similar surface. The unit should  
not be installed in a built-in location such as a bookcase or rack unless proper ventilation is provided. There should  
be free space of at least 6 inches (16cm) above the unit and an opening behind the unit.  
10. GROUNDING OR POLARIZATION: The unit may be equipped with a polarized alternating current line plug (a  
plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety  
feature. If you cannot insert the plug fully into the outlet, try reversing the plug. If the plug should fail to fit, contact  
a licensed electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.  
11. POWER SOURCES: The unit should be operated only from the type of power source indicated on the marking  
label. If you are not sure of the type of power supplied to your home, consult your unit dealer or local power  
company.  
12. POWER CORD PROTECTION: Power supply cords should be routed so that they are unlikely to be walked on or  
pinched by items placed on or against them. Pay close attention to cords where they enter a plug, or a convenience  
receptacle, and the point where they exit from the unit.  
13. OUTDOOR ANTENNA GROUNDING: If an outside antenna or cable system is connected to the unit, be sure the  
antenna or cable system is grounded so as to provide protection against voltage surges and built-up static charges.  
Article 810 of the National Electrical Code, NSI/NFPA 70, provides information regarding proper grounding of the  
mast and supporting structure, grounding of the lead-in wire to an Antenna-discharge unit, size of grounding  
conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the  
grounding electrode.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
14. LIGHTNING: For added protection for the unit during a lightning storm, or when it is left unattended and unused  
for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent  
damage to the unit due to lightning and power line surges.  
15. POWER LINES: An outside antenna system should not be located in the vicinity of overhead power lines or other  
electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside  
antenna system, take extreme care to keep from touching such power lines or circuits as contact with them might be  
fatal.  
16. OVERLOADING: Do not overload wall outlets, extension cords, or integral convenience receptacles as this can  
result in a risk of fire or electric shock.  
17. OBJECT AND LIQUID ENTRY: Never push objects of any kind into the unit through openings as they may touch  
dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind  
on the unit.  
18. SERVICING: Do not attempt to service the unit yourself as opening or removing covers may expose you to  
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.  
19. REPLACEMENT PARTS: When replacement parts are required, be sure the service technician has used  
replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized  
substitutions may result in fire, electric shock or other hazards.  
20. SAFETY CHECK: Upon completion of any service or repairs to the unit, ask the service technician to perform safety  
checks to determine that the unit is in proper operating condition.  
21. WALL OR CEILING MOUNTING: The unit should be mounted to a wall or ceiling only as recommended by the  
manufacturer.  
22. HEAT: The unit should be situated away from heat sources such as radiators, heat registers, stoves, or other units  
(including amplifiers) that produce heat.  
23. IMPORTANT SAFETY NOTE: Before connecting a new component such as the DVD 7 to your audio or home  
theater system it is always good practice to make certain that all components are turned off, and preferably  
unplugged from their AC power source. Many modern electronics products feature automatic turn-on circuits that  
may be activated during an installation, causing the potential for damage to electronic components and/or speakers.  
Such damage is not covered by product warranties and Cary Audio specifically disclaims responsibility for any such  
damage.  
Power Cord: The removable power cord that is shipped with the player is specifically designed to be used with this  
product. Other AC cords may be used, so consult your dealer for advice on AC power cords and high quality wire in  
your system.  
AC Fuse: The fuse is located inside the chassis and is not user serviceable. If power does not come on,  
contact your authorized service representative.  
Wiring: Cables that run inside of walls should have the appropriate markings to indicate compliance with, and listing  
by the UL, CSA or other standards required by the UL, CSA, NEC or your local building code. Questions about cables  
inside of walls should be referred to a qualified custom installer, or a licensed electrician or low-voltage contractor.  
Do Not Open the Cabinet: There are no user serviceable components inside this product. Opening the cabinet  
may present a shock hazard, and any modification to the product will void your warranty. If water or any metal  
object, such as a paper clip, coin, or staple accidentally falls inside the unit, disconnect it from the AC power source  
immediately and contact Cary Audio for further instructions.  
24. RECORDING COPYRIGHT: Recording of copyrighted material for other than personal use is illegal without  
permission of the copyright holder.  
25. NOTE TO CATV SYSTEM INSTALLER: This reminder is provided to call the CATV system installer's attention to  
article 820-40 of the NEC, ANSI/NFPA 70, which provides guidelines for proper grounding and, in particular, specifies  
that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry  
as practical.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
26. FCC INFORMATION FOR USER:  
CAUTION: ANY changes or modifications not expressly approved by the party responsible  
for compliance could void the user's authority to operate the equipment.  
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to  
Part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against harmful interference in a residential installation.  
This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with  
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that  
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to  
correct the interference by one or more of the following measures:  
- Reorient or relocate the receiving antenna.  
- Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from where the receiver is connected.  
27. OUTDOOR ANTENNA INSTALLATION/SAFE ANTENNA AND CABLE  
CONNECTION: If an outside antenna or cable system is connected to  
the equipment, be sure the antenna or cable system is grounded so as to  
provide protection against built up static charges and voltage surges,  
Section 810 of the national Electrical Code, ANSI/NFP A70 (in Canada,  
part 1 of the Canadian Electrical Code) provides information with respect  
to proper grounding of the mast and supporting structure, grounding of  
the lead-in wire to an antenna discharge unit, size of grounding  
conductors, location of antenna discharge unit, connection to grounding  
electrodes and requirements for the grounding electrode.  
Keep Antenna Clear of High Voltage Power Lines or Circuits  
An outside antenna system should be located well away from power lines, electric light or power circuits and where  
it will never come into contact with these power sources if it should happen to fall. When installing an outside  
antenna, extreme care should be taken to avoid touching power lines, circuits or other power sources as this could  
be fatal. Because of the hazards involved, antenna installation should be left to a professional.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
WELCOME  
PRODUCT OVERVIEW  
After ten years of continuous production we are proud to offer the CAD 805 Anniversary Edition.  
Each unit is designed for long term stability in virtually any home operating situation. Note that if  
the unit is operated outside the parameters outlined in this owner’s manual, damage may result.  
Please read this manual carefully before operating your new CAD 805 AE power amplifiers.  
The CAD 805 Anniversary Edition offers 50 watts per channel, Pure Class A Single Ended Triode  
Mono Blocks with dual 6SN7 input stage, 300B driver stage tube, includes both 845 and 211  
output tubes. It offers a user selector switch for the output tube, a Jaguar Anthracite black  
chassis and top plate with clear coat finish, and an anodized aluminum front panel with a ZERO  
feedback design.  
The 805 is a 300SE with an afterburner. The 805 has been through many versions through the  
years, improving on what already proved to be an outstanding power amplifier. The new design  
for the Anniversary Edition came about with the goal to take those years of practical field  
experience, and put everything in the kitchen sink- including the ability to switch from the 211  
(output) tube to the 845 (output) tube.  
UNPACKING AND INSTALLATION  
This section describes the unpacking and installation procedures for your new component.  
Unpacking  
All Cary Audio Design shipping cartons have been specially designed to protect their contents and  
special care has been taken to prevent damage under normal shipping conditions. Mishandling  
should be evident upon inspection of the shipping container. If shipping damage is found after  
visual inspection, take care not to destroy the evidence. If necessary, document the damage with  
photographs and contact the transport carrier immediately.  
Carefully remove your new component from its packing carton and examine it closely for signs of  
shipping damage. We strongly recommend saving all original packing cartons to protect your  
component from damage should you wish to store it or ship it at a later date.  
Warranty Card  
If you are the original purchaser of this unit and you purchased it in the United States, you  
should fill out the enclosed warranty registration card and return it to Cary Audio Design within  
15 days of your purchase. Cary Audio Design also suggests that you keep your original packing  
cartons in case you ever need to ship the unit when moving to a new home. Warranty  
restrictions apply. Consult the warranty section of this manual for details. Please be certain to  
keep a copy of the original sales receipt from your Authorized Cary Audio Design dealer to  
validate the warranty if ever needed.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
Operating the CAD 805 AE’s is a simple procedure, since each unit is designed for long term  
stability in virtually any home operating situation. However, if the unit is operated outside the  
parameters outlined in this owner’s manual, damage may result. Please read this manual  
carefully before putting your new CAD 805 AE in operation.  
...........................................................................................................................................................................  
Power Output  
...........................................................................................................................................................................  
Feedback 0 to 10 dB, continuously variable control  
...........................................................................................................................................................................  
Frequency Response 20 to 20 kHz + 0.5 dB  
...........................................................................................................................................................................  
AC Power Requirements 100, 110, 117, 220, 240, / 50-60 Hz, set by market  
...........................................................................................................................................................................  
Power Consumption 230 watts - OPERATE, 76 watts - STANDBY  
...........................................................................................................................................................................  
Shipping Weight 105 lbs.(47.7 kg.)  
...........................................................................................................................................................................  
Input Impedance 150,000 ohms (150 kg.)  
...........................................................................................................................................................................  
Output Impedance 4, 8 and 16 ohm speaker connection terminals  
...........................................................................................................................................................................  
Noise > 80 dB below rated output  
...........................................................................................................................................................................  
Sensitivity 1.0 Volt @ zero feedback for full output  
...........................................................................................................................................................................  
Coupling Capacitors Oil filled capacitors  
...........................................................................................................................................................................  
Power Supply Capacitors 4 - 1500 Fd @ 450V  
...........................................................................................................................................................................  
50 Watts ‘Class A’ operation mode  
Transformers  
1 - EI Laminated core power transformer  
1 - Special air-gap output transformer  
200% duty cycle on all transformers  
...........................................................................................................................................................................  
Tube Compliment  
In each amplifier chassis  
1 - 1629/6U5 ‘Cat Eye’ tube  
2 - 6SN7 input tubes  
1 - 300B driver tube  
1 - 845 output tube or (Please choose 845 or 211 during install)  
1 - 211 output tube (Please choose 211 or 845 during install)  
...........................................................................................................................................................................  
Warm-Up Time  
...........................................................................................................................................................................  
Break-In Period 100 hours of music playing time  
...........................................................................................................................................................................  
Finish Jaguar ‘Anthracite Black’ chassis  
...........................................................................................................................................................................  
AC Cord 3 conductor cord, detachable  
...........................................................................................................................................................................  
Dimensions 10” H x 12-1/4” W x 24” D (25.4 x 31.2 x 61 cm)  
...........................................................................................................................................................................  
5 minutes, after initial break in period  
Net Weight  
85 lbs. (38.6 kg.)  
...........................................................................................................................................................................  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROLS AND DISPLAYS  
FRONT PANEL  
CAT EYE TUBE  
Indicates approximate power output level. When the eye is  
completely closed the amplifier is at full power output.  
TOP PANEL  
OFF-ON TOGGLE SWITCH  
Turns AC power on in the rear position. The output tube will not  
light at this point.  
STANDBY SWITCH  
TUBE SELECTOR SWITCH  
FEEDBACK LEVEL  
Turns the filament of the output tube on in the rear position.  
Set either to 211 or 845 before installing selected output tube.  
Adjusts the level of feedback from 0 to 10 dB  
REAR PANEL  
INPUT  
Signal input connection via shielded RCA interconnect cable  
OUTPUT  
Three 5-way binding posts provide output to the speaker system  
(4, 8 or 16 ohm connections).  
FUSE  
AC power fuse. Never replace with any other value than 3 AMP  
SLOW BLOW FUSE! 250 VOLT!  
TUBE FUSE  
Never replace with any other fuse than ¼ amp FAST BLOW  
FUSE!  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
PHYSICAL PLACEMENT  
The CAD-805 Anniversary Edition is designed for use in homes. It must be protected from the  
elements and temperature extremes. For example, avoid placing the unit in extremely hot  
locations such as near radiators or other heating units. Its location among the user’s audio  
components is not critical; however, certain precautions must be taken. Avoid moisture, direct  
sunlight, and dusty areas.  
POWER REQUIREMENTS  
The CAD-805 Anniversary Edition is designed to operate from house current AC mains. The  
design voltage is 117 Volts AC at 50/60Hz (Foreign units 234 Volts AC at 50/60Hz).  
SPEAKER CABLES  
The speaker cables from the output posts of the CAD-805 Anniversary Edition to the speaker  
system can be any length that your setup requires. Select speaker cables of sufficient size to  
preserve the outstanding performance capabilities and sound quality of your new power  
amplifiers.  
Heavy duty #14 gauge wire is suitable for distances up to 15 feet; #10 gauge is good for 25-30  
feet. Most audio dealers have high performance speaker cable in stock for this purpose. We  
strongly urge you to try several types to find the best ones for your combination of components  
and speakers.  
INTERCONNECT CABLES  
Signal input connection is made via the RCA input jack on the rear of the amplifier located next  
to the output binding posts. The input interconnect cables from the output of the preamplifier  
can be any length your installation requires. A shielded high quality interconnect cable is  
important to reduce chances for hum or interference. Ask your Authorized Cary Audio Design  
audio dealer for advice.  
Operation  
Your new amplifier is ready for operation after the speaker cables, interconnect cables and the  
tubes have been installed. Choose either the 211 or the 845 output tube with the top panel tube  
selector switch, according to the actual one installed. Only change this switch setting with the  
amplifier OFF.  
WARNING  
FAILURE TO INSTALL THE TUBES CORRECTLY WILL DAMAGE THE UNIT.  
Watch the tube pins carefully on the 300B tube during installation as it is  
possible to force the tube to plug in ‘wrong’ during installation. The 300B tube  
has no ‘safety key’ center pin on the tube to prevent incorrect installation. It  
has two large pins and two slightly smaller pins. Please look carefully at the  
tube pins and the tube socket holes to note the two different size connections  
prior to installation. Incorrectly plugging in the 300B driver tube will possibly  
damage the amplifier and is not covered by the manufacturers warranty.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
OFF/ON POWER TOGGLE SWITCH  
Push the AC toggle switch toward the rear, to the “ON” position. The 6SN7 input tubes, 1629 Cat  
Eye tube and the 300B driver tube will light up in this setting.  
STANDBY TOGGLE SWITCH  
Push the toggle switch toward the rear of the unit to operate. The output tube will light up.  
‘BREAK IN’ PERIOD  
The tubes, capacitors and the output transformers take approximately 100 hours of music playing  
to fully settle in for peak performance. Small imperfections in the tube surfaces will ‘boil off’  
during the break in period as well. The amplifier will sound good right out of the box but it will  
improve as break in occurs. After the first couple of hours you will notice increased depth and  
tighter bass. This break in period is true with most high performance audio amplifiers.  
REPLACING VACUUM TUBES  
If it becomes necessary to replace the tubes, the same brand as installed new should be used. A  
complete new tube kit is available from Cary Audio Design. Although useful tube life varies  
depending on the nature and degree of use, under normal home use, the 845 or the 211 output  
tube and the 300B driver tube should last many years in the CAD-805. The 6SN7 input tubes  
should last even longer.  
NOTE  
Any current production or New Old Stock (NOS) types of 211, 845, 6SN7 or  
300B tubes will work fine in the CAD-805 Anniversary Edition amplifier. The  
voltages are fine for all available types.  
WARNING  
Make sure the amplifier is unplugged 30 minutes from the AC mains before  
replacing the tubes to avoid risk of shock and high heat from the 211 or 845  
tube.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
SERVICE AND CARE  
CARE AND CLEANING  
The cabinet housing and front panel of the CD 306 SACD may be cleaned with a soft cloth and  
Windex or a window cleaner. The frequency of cleaning will be governed by how many hours the  
CD 306 SACD is operated and by operating environment cleanliness.  
FACTORY SERVICE  
Careful consideration has been given to the design of your CD 306 SACD processor to keep  
maintenance problems to a minimum. Any problems or requests for service should be referred to  
our Customer Service Department at 919-355-0010. DO NOT return the CD 306 SACD to the  
factory without a return authorization number (RA) from the Customer Service Department.  
Cary Audio Design will assume no responsibility if the shipping company refuses to pay for  
damage due to your improper packing or lack of insurance should the unit be lost or damaged in  
shipment. Please retain and always use the original shipping carton for shipping the player.  
NON-WARRANTY REPAIRS  
Cary Audio Design will provide repair service for its products charging on a time and expense  
basis. At this time, the standard non warranty service bench fee is $125 with all parts used for  
repair charged extra. This may change and is not a quote for service. Please call us at 919-355-  
0010 for more information about out of warranty service and repair fees.  
CAUTION  
Never remove or insert the back panel AC plug when the unit is on or the ac  
cord is plugged into the wall.  
TROUBLESHOOTING GUIDE  
SYMPTOM  
CAUSE  
REMEDY  
Hum or “Buzzing” in  
Ground loop  
Install 2-pin adapter  
speakers  
on AC cord to float the ground  
300B tube with high plate  
current too high  
Check bias of 300B. If high,  
readjust to proper bias setting  
of 60 mA  
Intermittent or poor connection Replace bad interconnect cable  
of interconnect  
“Popping” or “Spitting”  
noise  
Noisy tube  
If noise is in one channel  
through the speaker, swap one  
section of tubes at a time until  
the noise swaps channels.  
Replace the noisy tube.  
Check bias of output tubes  
If high or fluctuating rapidly,  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SERVICE AND CARE  
replace output tube  
Replace fuse  
AC fuse blows  
Line voltage surge  
Tube fuse blows  
Shorted tube (300B &  
845 have separate fuses.)  
Replace tube  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY  
Cary Audio Warrants to the original United States purchaser for use in the United  
States the Following Cary Audio Products for the Periods Indicated:  
1. Power Amplifiers, Integrated Amplifiers, Surround Sound Processors, and Preamplifiers  
have a three (3) year parts and labor warranty from the date of the original purchase  
from Cary Audio.  
2. CD or SACD players, DVD players, or Music Servers have an eighteen (18) month parts  
and labor warranty from the date of the original purchase from Cary Audio.  
3. Vacuum tubes, if any are used in the component, are offered a 90-day exchange policy  
against defects with the exception of the CAVT 300B vacuum tube that has a one (1)  
year exchange policy from the date of the original purchase from Cary Audio.  
What is Covered and What is Not Covered  
Except as specified below, this warranty covers parts and labor to correct all defects in materials  
and workmanship. The following are not covered by the warranty:  
1. Damage, deterioration, malfunction or failure to meet performance specifications  
resulting from:  
a. Accident, acts of nature, misuse, abuse, neglect or unauthorized product  
modifications  
b. Improper installation, removal or maintenance, or failure to follow instructions  
supplied with the product.  
c. Repair or attempted repair by anyone not authorized by Cary Audio to repair the  
product.  
d. Any shipment of the product (claims must be presented to the carrier).  
e. Any cause other than a product defect.  
2. Cleaning, initial set-up, check-ups with no defects found, or charges incurred for  
installation, removal or reinstallation of the product.  
3. Any product, on which the serial number has been defaced, modified or removed.  
4. Batteries.  
5. Accessories, including but not limited to, batteries, cables, mounting hardware and  
brackets, cleaning accessories, antenna and detachable power cords.  
6. Warranty is void if purchase was made from anyone other than an authorized Cary Audio  
dealer.  
Who May Enforce the Warranty?  
This warranty extends to products purchased directly from Cary Audio or an authorized Cary  
Audio dealer. Purchasers should inquire of the dealer regarding the nature and extent of the  
dealer’s warranty, if any.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY  
To obtain such warranty service, the original purchaser must complete and send in the Warranty  
Registration Card within 15 days of purchase.  
What Will We Pay For?  
We will pay for all labor and material expenses for items covered by the warranty. Payment of  
shipping charges is discussed in the next section of this warranty.  
How You Can Get Service?  
In the event that the owner needs to return the unit to Cary Audio for service or repair of a  
possible defect, he must follow the following steps:  
1. Contact Cary Audio at 919-355-0010 to obtain a Return Merchandise Authorization (RMA)  
number prior to shipping; include this number with the package  
2. Submit a copy of the original sales receipt; blank receipts will not validate the limited  
warranty for service by Cary Audio. The original sales receipt must contain the following  
information:  
a. The authorized Cary Audio dealer’s name  
b. The date of purchase  
c. The unit’s sales price  
d. The buyer’s name and address  
e. Describe in detail the problem.  
f. Note the unit’s model number and serial number.  
3. Deliver by either of these methods:  
a. With all freight and insurance charges prepaid and in its original packing  
container or equivalent, ship the component to Cary Audio, 1020 Goodworth  
Drive Apex, NC 27539.  
b. Hand-deliver the product to Cary Audio (address noted above) or the nearest  
authorized service facility.  
Limitation of Implied Warranties  
All implied warranties, including warranties of merchantability and fitness for particular purchase,  
are limited in duration to the length of this warranty.  
Exclusion of Damages  
Cary Audio’s liability for any defective product is limited to repair or replacement of the product  
at Cary Audio’s option. Cary Audio shall not be liable for damage to other products caused by  
any defects in Cary Audio products, damages based upon inconvenience or loss of use of the  
product, or any other damages, whether incidental, consequential, or otherwise.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY  
How State Law Relates to the Warranty  
Some states do not allow limitations on how long an implied warranty lasts and/or do not allow  
the exclusion or limitation of incidental or consequential damages, so the above limitations or  
exclusions may not apply to you.  
This warranty gives you specific legal rights, and you may also have other rights which vary from  
state to state.  
International Purchasers (Export Markets)  
Cary Audio warrants its merchandise to purchasers within the United States exclusively for use  
within the United States. It provides no other warranties, expressed or implied. If you are living  
outside of the United States, please consult your local dealer or distributor to determine the  
details of your local warranty.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CARY AUDIO DESIGN  
1020 Goodworth Drive, Apex, NC 27539  
phone 919-355-0010  
fax 919-355-0013  
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
Download from Www.Somanuals.com. All Manuals Search And Download.  

Bernard Welder ACAPTS 10 User Manual
Black Decker Food Processor FP2500 User Manual
Black Decker Toaster T2808 User Manual
Braun Electric Shaver 2550 User Manual
Breville Blender BCS600XL User Manual
Briggs Stratton Plumbing Product Water Transfer Pump User Manual
Brother Printer HL 1040 User Manual
Canon Printer MP C635 User Manual
Canon Scanner D1230U D2400U User Manual
Char Broil Gas Grill 463247311 User Manual