Quick Start Guide
Be sure to install the software programs before connecting the scanner
to the computer!
Setup and Scanning
Check the Package Contents
p.2
Install the Software
Windows
p.3
p.4
Macintosh
Unlock the Scanning Unit
Connect the Scanner
Try Scanning
p.5
p.6
p.7
Try the Additional Features
Using the Scanner Buttons
p.10
Scanning Film (for CanoScan 3200F only
)
p.11
p.15
Using the USB 2.0 Interface (On Windows)
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the Manuals
Guide to the Manuals
Open the Package
Quick Start Guide (this guide)
This guide describes a series of processes, from opening the package to using the
scanner.
READ THIS GUIDE FIRST!
Scanning Guide (HTML format manual)
Refer to this guide when you have finished setting up the scanner according to the procedures
in the Quick Start Guide. It describes how to utilize the scanner with the bundled software,
and how to solve problems when they occur. You can install this manual onto the hard disk
together with the software programs. When you install it, the Scanning Guide icon will appear
on the desktop. Double-click the icon to view it with a browser program, such as Internet
Explorer.
HTML
User’s Guides for Application Programs (PDF format manuals)
• ArcSoft PhotoStudio
• ScanSoft OmniPage SE
PDF
• Ulead DVD PictureShow 2.0 SE Basic (Windows only)
Select the “View the Electronic Manuals” menu on the CanoScan Setup Utility CD-ROM. To
read these manuals, Adobe Acrobat Reader should be installed on your computer.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Check the Package Contents
Check the Package Contents
Scanner and Accessories
Film Guide for CanoScan 3200F
(for a film strip or a slide)
AC Adapter
USB Interface Cable
CanoScan 3200/3200F
Documents and Software Programs
• Quick Start Guide (this guide)
• Additional Documents
• CanoScan Setup Utility CD-ROM
• The two figures in the brackets below indicate the respective sizes of the Windows/
Macintosh versions of the software.
• Approximately 270 MB (for Windows) / 138 MB (for Macintosh) of hard disk space on
your computer is required to install all the programs. Additional free hard disk space
is required to operate the programs.
ScanGear CS (25 MB / 6 MB) - Scanner Driver
It allows you to scan and load images from the scanner.
CanoScan Toolbox (15 MB / 3 MB) - Scanning Utility Program
It enables you to scan images and copy (print), attach images to e-mail messages or save images with
simple steps. It also works with the scanner buttons.
ArcSoft PhotoStudio (32 MB / 20 MB) - Image Editing Program
It allows you to load images from the scanner, edit and retouch them, and apply special effects and
enhancements.
ScanSoft OmniPage SE (90 MB / 80 MB) - OCR (Optical Character Recognition) Program
It converts characters scanned from a book, magazine or newspaper into text data for editing or
digital transmission.
Ulead DVD PictureShow 2.0 SE Basic (Windows only) (75 MB) - Slideshow Program
It allows you to create slideshows by using a VCD burner that you can watch on your computer or
TV.
Adobe Acrobat Reader (24 MB / 24 MB) - PDF File Reader Program
Electronic manuals for the above software programs (HTML (5 MB) and PDF manuals)
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Install the Software (Windows)
Install the Software (Windows)
• With Windows XP/2000, you should log on with
an administrator user name when you install or
uninstall software programs.
• If you are using a computer which does not
equip USB 2.0 interface by standard, refer to
P.15.
1 Turn the computer on.
If the "Found New Hardware Wizard" or
"Add New Hardware Wizard" appears, click [Cancel].
2 Place the CanoScan Setup Utility CD-ROM in the drive.
The CanoScan Setup Utility main menu will display.
3 Click [Install the Software].
Read the SOFTWARE USER LICENSE AGREEMENT. Click [Yes] if
you accept the terms.
The [Install] window will display.
4 Click [Start Installation].
You will install six software programs and the Scanning Guide
(HTML format manual).
5 The installation procedure will start.
Follow the on-screen message prompts and click [Yes] or [Next]
to continue the installation.
• In few cases, your operating system may
require a restart. Follow the on-screen
messages to restart and resume installation.
6 When the installation is complete, click [Yes].
The computer will restart.
7 After Windows restarts, remove the CD-ROM from
the drive and store it in a safe place.
Continue on P. 5.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Install the Software (Macintosh)
Install the Software (Macintosh)
1 Turn the computer on.
Make sure to log in with the first created administrator to install the software. You cannot install the
software when logged in using added administrator accounts.
A message similar to the following may appear when
you are using the scanner with Mac OS 9: “Would you
like to look for the software on the Internet?” If it
does, click the [Cancel] button to close it.
2 Place the CanoScan Setup Utility CD-ROM in the
drive.
3 Double-click the CD-ROM icon.
4 Double-click the [SetUp] icon.
The CanoScan Setup Utility main menu will display.
Steps 3 and 4 will not be required if you are using
the scanner with Mac OS 9 and the QuickTime
[AutoPlay] setting is set to [Enable CD-ROM
AutoPlay]. In this case, the CanoScan Setup Utility
will automatically start up and display its main
menu when you place the CD-ROM in the drive.
5 Click [Install the Software].
Read the SOFTWARE USER LICENSE AGREEMENT. Click [Yes] if
you accept the terms.
The [Install] window will display.
6 Click [Start Installation].
You will install five software programs and the Scanning Guide
(HTML format manual)
7 The installation procedure will start.
With Mac OS X, enter the administrator name and password,
and click [OK]. (The administrator name must be the first
created administrator account.)
Follow the on-screen message prompts and click [Yes], [Next]
or [Install] to continue the installation.
8 When the installation is complete, click [Yes].
The computer will restart.
9 After restarting, remove the CD-ROM from the drive
and store it in a safe place.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Unlock the Scanning Unit
Unlock the Scanning Unit
• Unlock the scanning unit before connecting the scanner to the computer. If it is left
locked, a malfunction or other problem may occur.
1 Peel the seals off the scanner.
2 Gently turn the scanner over.
3 Push the lock switch toward the unlock mark ( ).
Lock Switch
Unlock Mark
4 Return the scanner to a horizontal position.
• When transporting the scanner, always lock the scanning unit by pushing the lock switch
toward the lock mark ( ).
• Carrying or transporting the scanner without locking the scanning unit may damage it.
Be particularly careful to lock the scanning unit when transporting the scanner in a
vehicle.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect the Scanner
Connect the Scanner
• Make sure that the scanning unit is unlocked. (P.5)
1 Peel the caution seal from the scanner.
2 Connect the scanner to the computer with the supplied USB interface cable.
USB Connector
Wide Flat Connector
Small Square Connector
USB Interface Cable
3 Attach the supplied AC adapter to the scanner.
AC Adapter
• Only use the USB interface cable and the AC adapter provided with the scanner. Use of
other cables or adapters may lead to a malfunction.
• The scanner does not have a power switch. The power is activated as soon as the AC
adapter is plugged in.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Try Scanning
Try Scanning
The following steps explain how to scan with ArcSoft PhotoStudio.
Top
1 Place a photo or a picture on the glass
by aligning its top edge with the
alignment mark, and close the
document cover.
Bottom
Alignment
Mark
Windows
Macintosh
2 Select [Start], [Programs] or [All
Programs], [ArcSoft PhotoStudio 5.5]
and [PhotoStudio 5.5].
2 Double-click the [Applications] folder
for Mac OS X or the [Applications (Mac
OS 9)] folder for Mac OS 9, followed by
the [PhotoStudio] folder and the [Pho-
toStudio] icon.
PhotoStudio will start.
PhotoStudio will start.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Try Scanning
Windows
Macintosh
3 Click the Acquire icon
or click the
3 Click the Acquire icon
or click the
[File] menu and select [Acquire].
[File] menu and select [Acquire].
If an error message appears, click the [File]
menu, choose [Select Source], select your
scanner model name and click the [OK] button.
If an error message appears, click the [File]
menu, choose [Select Source], select your
scanner model name and click the [Select]
button.
Mac OS X
ScanGear CS will start.
ScanGear CS will start.
4 Select the [Select source].
You can select from the following options.
Photo (Color)/Magazine (Color)/Newspaper (B&W)/Document
(Grayscale).
5 Click [Preview].
After calibration, the preview scan will start and gradually
display the image.
The image is automatically cropped at its original size.
If you want to trim the image further, drag the mouse
diagonally to select the area.
• Do not open the document cover while a
scan is in progress.
6 Select the [Destination].
You can select [Print] or [Image display].
When [Print] is selected, the output resolution is set to 300 dpi.
When [Image display] is selected, it is set to 150 dpi.
[Print] is selected in this example.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Try Scanning
7 Select the [Output Size].
You can select from the following options.
• If you selected [Print] in Step6:
Flexible / 4"x6" / A4 / Letter / Custom Settings
• If you selected [Image display] in Step 6:
Flexible / 640 x 480 / 800 x 600 / 1024 x 768 / 1600 x 1200 /
2048 x 1536 / Custom Settings
[Flexible] is selected in this example.
Selecting [Flexible] scans the item at the same size as the
original.
Selecting an option other than [Flexible] in the [Image Display]
category allows you to select the output size in pixels.
You can scan items at the correct dimensions for computer
displays (screen area) and digital cameras.
8 Click [Scan].
The final scan will start.
9 Click close box
(Windows) or
(Mac OS X) or
(Mac OS 9) in the ScanGear CS window to close
it.
The scanned image will appear in the PhotoStudio window.
10Save the scanned image.
Click the [File] menu and select [Save As]. Select the folder
where you wish to store the image file, enter a file name,
select a file type (JPG format is recommended) and click
[Save].
11Click close box
(Windows) or
(Mac OS X) or
(Mac OS 9) in the PhotoStudio window to close
it.
• If the scanner does not perform as described above, read the "Troubleshooting" section
of the Scanning Guide (HTML format manual).
• For details about the bundled software programs, read the Scanning Guide or the User’s
Guide (PDF format manual) for each software program on the CanoScan Setup Utility
CD-ROM.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Scanner Buttons
Using the Scanner Buttons
You can use the four convenient buttons on the front of the scanner to scan and perform related tasks easily
with a single touch of the button. Place an item on the scanner before pressing a button.
• To use these buttons, ScanGear CS, CanoScan Toolbox, ArcSoft PhotoStudio and Acrobat
Reader should be installed from the CanoScan Setup Utility CD-ROM.
COPY Button
E-MAIL Button
To print (copy) the scanned image with a printer:
To e-mail the scanned image as an attached file:
1 Press the [COPY] button.
1 Press the [E-MAIL] button.
2 The scanner will scan the item.
3 The scanned image will print.
2 The scanner will scan the item.
3 The [E-mail software selection] dialog
will appear. Select an option from the
list and click [OK].
• The printer driver should be installed and the
printer should be on-line to use this function.
This step is required only for the first scan.
4 The e-mail software will start and the
scanned image will be attached in a
new message window.
SCAN Button
To open the scanned image in the PhotoStudio
5 Enter the receiver’s address and title,
write a message, confirm the required
settings, and send the message.
window:
1 Press the [SCAN] button.
2 The scanner will scan the item.
• To use the E-MAIL Button, one of the following e-
mail programs should be installed and enabled.
For Windows: Microsoft Outlook Express,
Microsoft Outlook, Eudora or Netscape
Messenger. (Some mail programs are required to
set the MAPI function on.)
3 The scanned image will appear in the
PhotoStudio window.
FILE Button
To save the scanned image as a PDF file:
For Mac OS X: Mail (Mac OS X 10.2 or later),
Eudora or MS Entourage*.
For Mac OS 9: Microsoft Outlook Express or
Eudora.
* Sending multiple images to MS Entourage using
the Multi-Scan function is not supported.
1 Press the [FILE] button.
2 The scanner will scan the item.
3 The scanned image will be saved as a
PDF document and appear in Adobe
Acrobat Reader.
• If you press the [Cancel] button while scanning, you can change the default settings for
scanning. For changing settings or arranging the scanner button assignments, refer to
the CanoScan Toolbox section of the Scanning Guide (HTML format manual).
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning Film (for CanoScan 3200F only)
Scanning Film (for CanoScan 3200F only)
You can scan a single frame of 35 mm film (strips or slides) with CanoScan 3200F.
Positioning the Film
1 Remove the protective sheet from the document cover.
Slide the protective sheet up to remove it.
When you finish scanning, replace the protective sheet by aligning
it with the grooves in the document cover and sliding it
downward into place.
• Store the protective sheet in a safe place so that it
will not get bent or broken.
• Always replace the protective sheet when you are
not scanning film to prevent the light source
section from getting scratched.
Film Holder
2 Insert a fingernail into the slot in the Film Guide and
remove the Film Holder.
3 Place the film face down into the groove in the Film Guide.
35 mm Strip
Slide
Place a slide face down over the Film Guide's
window.
Align the frame you wish to scan with the Film
Guide's window.
• Hold the film by the edges with your fingertips to avoid getting fingerprints or dirt
on the film surface.
• Remove dust from the film, the document glass and the light source.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning Film (for CanoScan 3200F only)
4 Clip the Film Holder back into the slots in the Film Guide for a 35 mm strip.
Film Holder
Slides do not require the Film Holder to be closed.
Calibration Slot
5 Place the loaded Film Guide in the correct
position on the document glass of the
scanner.
Align the Film Guide’s
scanner’s mark.
mark with the
• The Film Guide has a calibration slot used by the scanner to calculate the color
balance. The film cannot be scanned with the correct color balance if this slot is
obstructed. Keep it clear.
6 Close the document cover.
• You can purchase the Accessory Kit for CanoScan 3200F (CSAK-3200F) if the
protective sheet or the Film Guide lost or damaged.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning Film (for CanoScan 3200F only)
Scanning Film
The following steps explain how to scan the film with ArcSoft PhotoStudio.
1 Start ArcSoft PhotoStudio.
Select [Start], [Programs] or [All Programs], [ArcSoft PhotoStudio 5.5] and [PhotoStudio
5.5].
Double-click the [Applications] folder for Mac OS X or the [Applications (Mac OS 9)]
folder for Mac OS 9, followed by the [PhotoStudio] folder and the [PhotoStudio] icon.
2 Start ScanGear CS.
Click the Acquire icon
or click the [File] menu and select [Acquire].
or click the [File] menu and select [Acquire].
Click the Acquire icon
• If an error message appears, click the [File] menu, choose [Select Source], select your scanner
model name and click the [Select] button for Windows or the [OK] button for Macintosh.
Windows
Macintosh (Mac OS X)
ScanGear CS will start.
3 Select the [Select source].
You can select from the following options for films.
Negative Film (Color) / Positive Film (Color)
4 Click [Preview].
After calibration, the preview scan will start and gradually
display the image. The image is automatically cropped.
If you want to trim the image further, drag the mouse
diagonally to select the area.
• Do not open the document cover while a
scan is in progress.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning Film (for CanoScan 3200F only)
5 Select the [Destination].
You can select [Print] or [Image display].
When [Print] is selected, the output resolution is set to 300
dpi. When [Image display] is selected, it is set to 150 dpi.
[Print] is selected in this example.
6 Select the [Output Size].
You can select from the following options.
• If you selected [Print] in Step 5:
Flexible / 4"x6" / A4 / Letter / Custom Settings
• If you selected [Image display] in Step 5:
Flexible / 640 x 480 / 800 x 600 / 1024 x 768 / 1600 x 1200 /
2048 x 1536 / Custom Settings
[Flexible] is selected in this example.
Selecting [Flexible] scans and enlarges one film frame to the
4"x6" size. If the display mode is set to Thumbnail Display Off,
the image is scanned at the same size as the original film. See
the Scanning Guide for information about the Thumbnail
Display mode.
Selecting an option other than [Flexible] in the [Image Display]
category allows you to select the output size in pixels.
You can scan film at the correct dimensions for computer
displays (screen area) and digital cameras.
7 Click [Scan].
The final scan will start.
When the scan is complete, click the ScanGear CS close box
(Windows) or
(Mac OS X) or
(Mac OS 9) .
The scanned image will appear in ArcSoft PhotoStudio.
8 Save the scanned image.
Click the [File] menu and select [Save As]. Select the folder
where you wish to store the image file, enter a file name,
select a file type (JPEG format is recommended) and click
[Save].
9 Click close box
(Windows) or
(Mac OS X) or
(Mac OS 9) in the PhotoStudio window to close it.
• If the scanner does not perform as described above, read the "Troubleshooting"
section of the Scanning Guide (HTML format manual).
• For details about the bundled software programs, read the Scanning Guide or the
User’s Guide (PDF format manual) for each software program on the CanoScan Setup
Utility CD-ROM.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the USB 2.0 Interface (On Windows)
Using the USB 2.0 Interface (On Windows)
To Switch to USB 2.0
If your computer is equipped with USB 1.1, you can switch to the USB 2.0 environment for faster scanning
by purchasing and installing one of the USB 2.0 expansion cards available on the market.
Compatible USB Expansion Cards/Hubs
Please use one the following USB expansion cards/hubs that have been verified by Canon for compatibility.
Expansion Cards
• Adaptec USB2connect 5100: PCI bus
• Adaptec USB2connect 3100: PCI bus
• Adaptec USB2connect 2000LP: PCI bus
• Adaptec DuoConnect: PCI bus
Hubs
• Adaptec XHUB4
• Adaptec XHUB4PLUS
• Adaptec XHUB7PLUS
For installation procedures, please read the instructions that accompany the USB expansion card/hub.
Confirming the USB Version
Use the following procedures to confirm whether your computer is
equipped with a USB version 1.1 or 2.0 interface.
1 Start ScanGear CS.
2 Click the information icon
in the upper portion of the
ScanGear CS window.
3 Read the contents of the Interface category in the displayed
window. USB 1.1 will show as “USB 1.1” and USB 2.0 as “USB 2.0.”
4 Click the close box
to close the window.
Troubleshooting the USB2.0 Hi-Speed Interface
If the scanner is not operating correctly via the USB2.0 Hi-Speed interface, follow the steps below to
troubleshoot it.
1 Ensure that you use the USB cable supplied with the scanner.
2 Connect the scanner directly to a USB port on the computer, not through a USB hub.
3 With the Microsoft USB 2.0 driver, if the scanner is not recognized by the computer
after installing ScanGear CS:
• Detach the AC adapter and attach it again.
• Detach the USB cable and attach it again.
4 Use the following procedures to confirm that the computer correctly recognizes the
USB expansion card and the scanner.
1. Open the Windows [Device Manager] and confirm that your scanner name appears below the [Imag-
ing Device] category.
2. Confirm that [Adaptec AUA-xxxx], [NEC PCI to USB Enhanced Host Controller] or [Intel PCI to USB
Enhanced Host Controller] appears below the [USB (Universal Serial Bus) Controllers] category.
3. Confirm that the USB expansion card is correctly installed into the computer and that the scanner is
attached to its port.
4. If you use more than two devices via USB2.0 Hi-Speed interface, try to disconnect other devices than
the scanner.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Specifications
CanoScan 3200
CanoScan 3200F
Scanner Type
Flatbed
Scanning Element
Light Source
CCD 6-line color
Cold cathode fluorescent lamp
Film Adapter Unit
Optical Resolution
Selectable Resolution
-
Standard equipped
1200 x 2400 dpi
25 - 9600 dpi (ScanGear CS)
Color
Grayscale
16 bit input / 16 bit or 8 bit output for each color (RGB)
16 bit input / 16 bit or 8 bit output *1
Scanning Bit Depth
Scanning Speed*2
(Photo or Document)
Scanning Speed*2 (Film)
Preview Speed*3
Color
Grayscale, B&W
Color, GrayScale, B&W
2 msec./line (600 dpi), 3.6 msec./line (1200 dpi)
2 msec./line (600 dpi), 3.6 msec./line (1200 dpi)
-
8 - 128 msec./line (1200 dpi)
Approximately 2.6 sec.
USB 2.0 Hi-Speed,
USB (USB 1.1 equivalent)
Interface
Maximum Document Size
Film Type/Number of Frames
Scanner Buttons
A4/Letter: 216 x 297 mm (8.5 x 11.7 in.)
35 mm strip (negative/
-
-
positive)/1 frame
35 mm slide (negative/
positive)/1 frame
4 buttons: COPY, SCAN, FILE, E-MAIL
Temperature
10°C to 35°C (50°F to 95°F)
Operating Range
10% to 90% RH, 20% to 80% RH when scanning film
(without condensation formation)
Humidity
AC adapter (100/120/230/240V) *4
In operation: 15 watts maximum, Stand-by: 5.3 watts (Using
supplied AC adapter)
Power Requirements
Power Consumption
Maximum Exterior Dimensions
Weight
259 x 474.7 x 74.7 mm (10.2 x 18.7 x 2.9 in.)
Approximately 2.5 kg
(5.5 lbs.)
Approximately 2.7 kg
(5.9 lbs.)
*1 16 bit output supports only for film scanning.
*2 USB 2.0 Hi-Speed mode. Transfer time to computer is not included.
*3 Calibration processing time is not included.
*4 Type of AC adapter depends on the area where the scanner is purchased.
• Specifications are subject to change without notice.
• Before you upgrade to Windows XP from Windows 98/Me/2000, you must uninstall
ScanGear CS and CanoScan Toolbox using the “Uninstall the Software” menu of the
CanoScan Setup Utility CD-ROM. The scanner may not work if you upgrade to Windows
XP with these programs still installed. After upgrading to Windows XP, reinstall
ScanGear CS and CanoScan Toolbox according to the steps on page 3. For details, please
read the “Troubleshooting” section of the Scanning Guide (HTML format manual).
16
Download from Www.Somanuals.com. All Manuals Search And Download.
System Information
System Information
This form should be used to record the operating environment for the purchased scanner.
If any problems occur with the scanner, you will need this information when you contact our Customer
Support Help Desk. Be sure to record the information and store it in a safe location.
• This information is also required to request a repair under warranty. Make sure you record the
information and store it in a safe location.
• Guaranteed servicing for this equipment will expire five years after production ceases.
Date of Purchase:
Dealer Tel:
Dealer Address:
Scanner Model:
CanoScan
3200
3200F
Serial Number (on the back of the equipment):
• About the Computer Used
Manufacturer:
CPU:
Model:
Clock Speed:
MHz
MB
Memory Capacity (RAM):
Hard Disk Capacity:
MB
MB
Space Available:
OS:
Windows
XP
Me
2000
OS X v10.1
98
Macintosh
OS 9.1
OS 9.2
OS X v10.2
Monitor Type:
Printer:
Monitor Size:
inches
Manufacturer:
Type of Printer:
Printer Resolutions:
Installed Virus Protection Program:
Installed Compression Program:
On-Board Expansion Cards:
Attached Peripherals:
Connected Network System:
1
Download from Www.Somanuals.com. All Manuals Search And Download.
CANON INC.
CANON DANMARK A/S
1. Kund Højgaards Vej1, DK-2860 Søborg, Denmark
Hotline: +45 44 88 25 91
30-2, Shimomaruko 3-chome, Ohta-ku Tokyo 146-8501, Japan
CANON U.S.A., INC.
Forhandlerhenvisning:
One Canon Plaza, Lake Success, New York 11042, U.S.A.
Customer Care Center: 1-757-413-2848
CANON NORGE as
Hallagerbakken 110, Postboks 33, Holmlia, 1210 Oslo, Norway
Tlf: 2262 9321 Faks: 2262 0615
CANON CANADA INC.
6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada 1-800-OK CANON
CANON SVENSKA AB
CANON LATIN AMERICA, INC.
Gustav III:s Boulevard 26, S-169 88 Solna, Sweden
Support-Under garantitiden: Tel. 08-744 86 20
Support-Efter garantitiden: Tel. 0900-20 30 555
E-post support: [email protected]
703 Waterford Way, Suite 400 Miami, Florida 33126, U.S.A.
CANON MEXICANA, S. de R.L. de C.V.
Anillo Periferico Sur No. 4124, Torre Zafiro (II) Colonia Ex-Rancho de Anzaldo,
Piso 5 y 6, Mexico D.F.
Tel. (525) 5490-2000
CANON OY
Kornetintie3, 00380 Helsinki, Finland
Puhelin: 010 54420 Fax: 010 544 4571
Helpdesk: 0600 0 22606 (9,95 mk/min+pvm)
Helpdesk: 0600 0 22666 (enint. 40 mk/puhelu+pvm)
Faksi: 010 544 4382
CANON PANAMA, S.A.
Apartado 7022, Panama 5, Rep. de Panama
Tel. (507) 279-8900
CANON CHILE, S.A.
Ave. Manquehue Norte #1337, Piso 3, Casilla 187-9 Santiago, Chile
Tel. (562) 366-6600
Sähköposti: [email protected]
CANON ARGENTINA, S.A.
Ave. Corrientes 420 (1043) Buenos Aires, Argentina
Tel. (5411) 432-59800
CANON NORTH-EAST OY
Huopalahdentie 24, P.O. Box 46, FIN-00351 Helsinki, Finland
Tel. +358 10 544 20 Fax +358 10 544 10
CANON EUROPA N.V.
P.O. Box 2262 1180 EG Amstelveen, The Netherlands
CANON (UK) LTD.
Woodhatch, Reigate, Surrey RH2 8BF, United Kingdom
For technical support, please contact Canon Help Desk.
P.O. Box 431, Wallington, Surrey SM6 0XU, UK
Tel: (08705) 143 723 (Calls may be recorded)
Fax: (08705) 143 340
COPICANOLA SA
Rua Alfredo da Silva, 14, 2721-862 Alfragide, Portugal
Tel: 21 471 11 11 Fax: 21 471 09 89
For sales enquiries, please call 08705 143723
CANON SINGAPORE PTE. LTD.
79 Anson Road #09-01/06, Singapore 079906
CANON COMMUNICATION & IMAGE FRANCE S.A.
102 Avenue du Général de Gaulle
92257 LA GARENNE COLOMBES CEDEX, France
Tél: 01.41.30.15.15 Fax: 01.41.30.15.05
E-mail:[email protected]
CANON MARKETING SERVICES PTE. LTD.
No. 1, Jalan Kilang Timor, #09-00 Pacific Tech Centre, Singapore, 159303
Tel: 65-6799-8888, Fax: 65-6273-6786
Hotline: 65-6334-2726
CANON DEUTSCHLAND GmbH
Europark Fichtenhain A10, 47807 Krefeld, Germany
Technischer Support
Telefax: 0810 / 500 60 22 (0.12€/Min.)
CANON MARKETING (MALAYSIA) SDN. BHD.
Block D, Peremba Square
Saujana Resort, Section, 40150 Shah Alam, Selangor Darul Ehsan
Malaysia
Tel: 603-7844-6000, Fax: 603-7844-6048
Helpdesk: 603-7844-6008/9
Enquiry: print&[email protected]
CANON ITALIA S.P.A
Palazzo L, Strada 6, 20089 Milanofiori, Rozzano (MI), Italy
Tel: 02/8248.1 Fax: 02/8248.4604
Pronto Canon: 02/8249.2000
CANON NEDERLAND N.V.
Neptunusstraat 1, 2132 JA Hoofddorp, The Netherlands
Tel: 023-5 670 123 Fax: 023-5 670 124
Helpdesk: 023-5 681 681
CANON MARKETING (THAILAND) CO. LTD.
179/34-45 Bangkok City Tower, 9th-10th Floor
South Sathorn Road, Thungmahamek
Sathorn, Bangkok 10120, Thailand
Tel: 662-3449999, Fax: 662-3449968
CANON BELGIUM N.V./S.A.
Bessenveldstraat 7, B-1831 Diegem, Belgium
Tel: 02 7220411 Fax: 02 7213274
Helpdesk: 090010627
CANON MARKETING (PHILIPPINES) INC.
Marvin Plaza Building, 2153 Don Chino Roces Ave,
Makati City, Metro Manila, Philippines
Tel: 632-8126047, Fax: 632-8120067/8109797
CANON LUXEMBOURG S.A.
Rue des Joncs 21, L-1818 Howald, Luxembourg
Tel.: (352) 48 47 961 Fax: (352) 48 47 96232
Helpdesk: 900 74100
CANON INDIA Pvt. LTD.
Neela Gagan, Mandi Road, Mehrauli, New Delhi-110030, India
Tel: 91-11-6806572, Fax: 91-11-6807180
CANON HONGKONG CO., LTD.
9/F, The Hong Kong Club Building 3A, Chater Road, Central, Hong Kong
TEL: (852) 2739 0802 FAX: (852) 2739 6428
CANON Ges.m.b.H.
Zetschegasse 11, 1230 Wien, Austria
Tel.: (01) 680 88-412 Fax: (01) 680 88-413
CANON AUSTRALIA PTY. LTD.
1 Thomas Holt Drive, North Ryde, Sydney N.S.W. 2113, Australia
Info-Line: (02) 9805 2864
CANON CEE GMBH
Oberlaaerstr. 233, A-1100 Wien, Austria
Tel: +43 1 680 88-331 Fax: +43 1 680 88-333
CANON NEW ZEALAND LTD.
Akoranga Business Park, Akoranga Drive, Northcote Auckland, New Zealand
Info-Line: (09)489 0470
CANON (SCHWEIZ) AG
Product Support CCI Industriestrasse 12, 8305 Dietlikon, Switzerland
Fax: 0041 (0) 1 835 68 59
ADOBE SYSTEMS INCORPORATED
Hotline: 0900 57 55 20 (Fr.2.13/min)
ARCSOFT, INC
CANON ESPAÑA S.A.
C/Joaquin Costa, 41-28002, Madrid, Spain
Tel.: 91-538 4500 Fax.: 91-411 4176
Tel: Atención al cliente: 901.301.301
Help Desk: 906.301255
SCANSOFT, INC
Ulead Systems, INC
E-mail:[email protected]
I-IE-091A
©CANON INC. 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
PRINTED IN CHINA1
|