Software User’s Guide
For DCP users; This documentation is for both MFC and DCP models. Where it says 'MFC' in this user's
guide, please read 'MFC' as 'DCP'.
Not all models are available in all countries.
Version B
USA
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Monitoring the machine’s status..........................................................................................................4
Basic tab....................................................................................................................................................7
Print Quality.........................................................................................................................................8
Paper Size...........................................................................................................................................9
Color Mode........................................................................................................................................10
Orientation.........................................................................................................................................10
Color/Grayscale.................................................................................................................................16
Color Settings....................................................................................................................................16
Watermark Settings...........................................................................................................................19
Add Profile.........................................................................................................................................28
Delete Profile.....................................................................................................................................28
Starting FaceFilter Studio with your Brother machine turned on.......................................................32
Uninstalling FaceFilter Studio............................................................................................................37
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning a document into the computer...........................................................................................38
Scanning a document into the computer...........................................................................................47
(Windows Photo Gallery and Windows Fax and Scan users)..........................................................52
Scanning a document into the computer...........................................................................................52
Using Nuance™ PaperPort™ 12SE........................................................................................................55
Organizing your items in folders........................................................................................................56
Quick links to other applications........................................................................................................56
Editing images...................................................................................................................................64
Printing the scanned image...............................................................................................................68
Opening the scanned image with an application...............................................................................69
Sending a scanned image.................................................................................................................72
Configuring Remote Setup (For MFC models)..................................................................................74
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Brother Solutions Center...................................................................................................78
ControlCenter4 Features for Advanced Mode users.........................................................................80
Opening the scanned image with an application...............................................................................82
Printing the scanned image...............................................................................................................84
Sending a scanned image.................................................................................................................87
Configuring Remote Setup (For MFC models)..................................................................................89
Using the Brother Solutions Center...................................................................................................93
PC-FAX sending......................................................................................................................................98
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up a member in the Address Book......................................................................................103
Exporting the Address Book............................................................................................................105
Configuring the Network PC-FAX Receiving Settings.....................................................................112
Using PhotoCapture Center™...............................................................................................................114
Windows XP SP2 or higher users .................................................................................................116
Windows Vista users .....................................................................................................................118
Windows 7 users...........................................................................................................................120
Simultaneous printing, scanning and faxing....................................................................................126
Clearing data from the memory.......................................................................................................126
Choosing page setup options..........................................................................................................129
Choosing printing options................................................................................................................133
Print Quality.....................................................................................................................................135
Color/Grayscale...............................................................................................................................135
Color Settings........................................................................................................................................139
Advanced Color Settings.................................................................................................................139
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning an image into your computer...........................................................................................146
Pre-Scanning an image...................................................................................................................146
Changing the default settings of a button........................................................................................170
User-defined button.........................................................................................................................173
Address Book (For MFC models)....................................................................................................180
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Scan button over a USB cable connection............................................................................187
How to set a new default for Scan to Media....................................................................................199
Network license (Windows ) ...........................................................................................................201
Configuring Network Scanning for Windows .................................................................................201
Scan to Network (Windows ) ..........................................................................................................221
(Windows Vista SP2 or later and Windows 7)................................................................................226
(Windows Vista SP2 or later and Windows 7).........................................................................226
(Windows Vista SP2 or later and Windows 7).........................................................................228
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
1
1
1
NOTE
®
• The screens in this section are from Windows 7. Screens on your computer may vary depending on your
operating system.
• If your computer is protected by a firewall, and you are unable to network print, network scan or PC-Fax,
®
you may need to configure the firewall settings. If you are using the Windows Firewall and you installed
MFL-Pro Suite from the CD-ROM, the necessary Firewall settings have already been made. If you did not
®
Windows Firewall. If you are using any other personal Firewall software, see the user’s guide for your
software or contact the software manufacturer.
Using the Brother printer driver
1
A printer driver translates the data from your application, and using a page description language, converts it
into a format that can be understood by the printer/multi-function device.
You will find appropriate drivers on the CD-ROM supplied with the machine. Install those drivers by following
the steps in the Quick Setup Guide. You can also download the latest drivers from the Brother Solutions
Center at:
Features
1
This machine offers many features you will find in a high quality ink jet printer.
Brilliant High Quality Output
Printing at up to 1200 6000 dpi on glossy paper to get the best possible resolution. The printer driver
supports N in 1, Watermark printing, Color Enhancement technology and many other features.
Low Running Cost
Whenever a particular ink color requires replacement, you only have to replace that individual cartridge.
USB
The Universal Serial Bus interface provides fast communication with your computer.
Ethernet (For Wired Network models)
The Ethernet interface lets your machine communicate with multiple computers connected on a network. This
feature is available for Wired Network models only.
Wireless LAN (IEEE802.11b/g/n)
The wireless LAN capability lets your machine communicate with other wireless devices using the
IEEE802.11b/g/n wireless standard in Infrastructure and Ad-hoc modes. See Network User’s Guide.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
Choosing the right type of paper
1
1
For high quality printing, it is important to choose the right type of paper. Be sure to read Loading paper and
Loading documents in the Basic User’s Guide before buying paper, and to determine the printable area
depending on the settings in the printer driver.
Simultaneous printing, scanning and faxing
1
Your machine can print from your computer while sending or receiving a fax in memory, or while scanning a
document into the computer. Fax sending will not be stopped during computer printing.
However, when the machine is copying or receiving a fax on paper, it pauses the computer printing operation,
and then continues printing when copying or fax receiving has finished.
Clearing data from the memory
1
If the LCD shows Data Remaining in Memory, you can clear the data that is left in the printer memory
by pressing
on the control panel.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
Status Monitor
1
1
The Status Monitor utility is a configurable software tool for monitoring the status of one or more devices,
allowing you to get immediate notification of error messages such as paper empty, paper jam or ink
replacement required.
You can check the device status at anytime by double-clicking the icon in the tasktray or by choosing
Status Monitor located in
/All Programs/Brother/MFC-XXXX on your computer.
There is also a link to the Genuine Brother Supplies website. Click the
Visit the Genuine Supplies website button for more information on Brother genuine supplies.
Click the Troubleshooting button to access the troubleshooting website.
Error Messages
The ink level is low.
The ink cartridge is empty.
There is a problem with the ink cartridge.
NOTE
For more information about using the Status Monitor software, right-click the Brother Status Monitor icon
and choose Help.
Monitoring the machine’s status
1
Once you start up your computer, the Brother Status Monitor icon appears on the tasktray.
The green icon indicates the machine is ready.
The yellow icon indicates a warning.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
The red icon indicates an error has occurred.
The gray icon indicates the machine is offline.
1
The Status Monitor can be displayed in the tasktray or on the desktop of your computer.
Popup on Error
1
Popup on Error lets you know if there is a problem with a device that your computer is monitoring. The
default setting is On.
If you want to turn off Popup on Error, follow these steps:
a Right-click the Brother Status Monitor icon or window and click Popup on Error to clear the check
mark.
b Right-click again, then click Exit.
NOTE
Even if Popup on Error is turned off, you can check the machine’s status at any time by displaying the
Status Monitor.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
Printer driver settings
1
1
You can change the following printer settings when you print from your computer:
Media Type
Print Quality
Paper Size
Orientation
2-sided / Booklet
Color / Grayscale
Ink Save Mode
Scaling
Accessing the printer driver settings
1
®
a From an application such as Microsoft Notepad, click File, then Print in your application.
b Choose Brother MFC-XXXX Printer (where XXXX is your model name) and click Preferences.
The printer driver window appears.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
Basic tab
1
1
1
2
3
4
5
6
7
19
20
8
9
10
11
12
13
14
15
16
17
18
1 Media Type drop-down list
2 Slow Drying Paper check box
3 Print Quality drop-down list
4 Paper Size drop-down list
5 Borderless check box
6 Color Mode option
7 Orientation option
8 Copies option
9 Collate check box
10 Reverse Order check box
11 Multiple Page drop-down list
12 Page Order drop-down list
13 Border Line drop-down list
14 2-sided / Booklet drop-down list
15 2-sided Settings button
16 Paper Source drop-down list (For MFC-J4610DW/J4710DW)
17 Default button
18 OK button
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
19 Current settings view
20 Print Preview check box
1
a Choose your settings for Media Type, Slow Drying Paper and Print Quality.
NOTE
Check Slow Drying Paper when printing with plain paper on which ink dries slowly. This setting may
cause some slight blurring of text.
b Choose Paper Size, Borderless, Color Mode, Orientation, number of Copies and the page order,
Collate, Reverse Order, Multiple Page, Page Order, Border Line and 2-sided / Booklet (if required).
(For MFC-J4610DW/J4710DW)
Choose Paper Source if necessary.
c Click OK to apply your chosen settings.
To return to the default settings, click Default, then OK.
NOTE
If you want to preview your document before printing, check the Print Preview check box.
Media Type
1
To achieve the best print results, the media being printed on should be selected in the driver. The machine
changes the way to print depending on the selected media type.
Plain Paper
Inkjet Paper
Brother BP71 Photo Paper
Brother BP60 Matte Paper
Other Photo Paper
Transparencies
Print Quality
1
The Print Quality selection lets you choose the print resolution. As print quality and speed are related, the
higher the quality, the longer it will take to print the document. The quality selections that are available will
vary depending on the media type you choose.
Best
Use for printing precise images such as photographs. This is the best resolution and slowest speed.
Photo
Use for printing photographs. Since the print data is much larger than a normal document, the processing
time, data transfer time and print time will be longer.
Normal
Good print quality with typical print speed.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
Fast
The fastest print mode and the lowest amount of ink used. Use for printing large volume documents or
documents for proofing.
1
Media Type
Color/Grayscale
Print Quality Selection
Color / Grayscale
Fast, Normal, Best
Plain Paper
Inkjet Paper or
Brother BP60 Matte Paper
Color / Grayscale
Color / Grayscale
Color / Grayscale
Normal, Photo
Fast, Photo, Best
Normal
Brother BP71 Photo Paper or
Other Photo Paper
Transparencies
1
If you choose Ledger as the Paper Size and check the Borderless check box, you can only choose Best.
NOTE
The default settings are shown in bold.
Paper Size
1
The Paper Size drop-down list includes a large selection of standard paper sizes. If you want, you can create
a custom size ranging from 3.5 5 in. (88.9 127.0 mm) to 11.3 17 in. (287 431.8 mm). From the
drop-down list, choose the Paper Size you are using.
NOTE
• You can print using Legal, Ledger and A3 paper only from the manual feed slot.
• When you are feeding Legal, Ledger or A3 size paper in the manual feed slot, the machine holds the
printed page after printing so that the page does not fall. Once printing is complete, pull out the printed
page and press OK.
• (For MFC-J4710DW)
You can also print using Legal, Ledger and A3 paper from Tray2.
You can create a custom size by choosing User Defined. Specify the Width and Height values, and enter
any name you want for this custom size. Choose the correct paper thickness to improve the quality of your
output.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
1
NOTE
• Depending on the user defined size, you may only be able to print using the manual feed slot.
• The paper orientation (portrait or landscape) varies depending on the paper size. See Basic User’s Guide.
To do borderless printing
1
Check the Borderless check box.
Color Mode
1
Color is adjusted to get the closest color match with the monitor.
Natural: Use for photographic images. The color is adjusted to print more natural colors.
Vivid: Use for business graphics such as charts, graphics and text. The color is adjusted to print more vivid
colors.
Orientation
1
Orientation chooses the position that your document will be printed (in Portrait or Landscape).
Portrait (Vertical)
Landscape (Horizontal)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
NOTE
1
If your application software contains a similar function to this, we recommend you use the one in the
application.
Copies
1
The Copies selection sets the number of copies that will be printed (1 to 999).
Collate
1
With Collate checked, one complete copy of your document will be printed and then reprinted according to
the number of copies you choose. If Collate is unchecked, then each page will be printed according to the
number of copies chosen before the next page of the document is printed.
Reverse Order
1
Reverse Order prints the pages of your document in the opposite order. The last page of your document will
be printed first.
Multiple Page
1
The Multiple Page option lets you choose the N in 1 options or the 1 in N options. The N in 1 options print 2,
4, 9 or 16 pages of a document on 1 sheet of paper. The 1 in N options enlarges your print size and prints
the document in poster print mode.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
Page Order
1
When the N in 1 option is selected, the Page Order can be selected from the drop-down list.
1
Border Line
1
When the N in 1 option is selected, you can choose to have a solid border, dashed border or no border around
each page on the sheet.
2-sided / Booklet
1
When you want to print a booklet or do 2-sided printing, use this function.
None
Disable 2-sided printing.
2-sided
The machine prints on both sides of the paper automatically.
When you choose 2-sided, the 2-sided Settings button becomes available to choose. You can set the
following settings in the 2-sided Settings dialog box.
• 2-sided Type
There are four types of 2-sided binding directions available for each orientation.
• Binding Offset
When you check Binding Offset, you can also specify the offset for binding in inches or millimeters.
NOTE
You cannot use Legal, Ledger or A3 paper for 2-sided printing.
Booklet
Use this option to print a document in booklet format using 2-sided printing; it will arrange the document
according to the correct page number and allows you to fold at the center of the print output without having
to change the page number order.
Booklet
The machine prints on both sides of the paper automatically.
When you choose Booklet, the 2-sided Settings button becomes available to choose. You can set the
following settings in the 2-sided Settings dialog box.
• 2-sided Type
There are two types of 2-sided binding directions available for each orientation.
• Booklet Printing Method
When Divide into Sets is selected:
This option allows you to print the whole booklet into smaller individual booklet sets, it still allows you
to fold at the center of the smaller individual booklet sets without having to change the order of the page
number. You can specify the number of sheets in each smaller booklet set, from 1 to 15. This option
can help when folding the printed booklet that has a large number of pages.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
• Binding Offset
When you check Binding Offset, you can also specify the offset for binding in inches or millimeters.
1
NOTE
The Borderless feature is not available for 2-sided printing and booklet printing.
Paper Source (For MFC-J4610DW/J4710DW)
1
You can choose Auto Select, Tray1 or Tray2 as Paper Source. If you put one sheet of paper in the manual
feed slot, the paper from the slot is automatically chosen. Make sure that you do not put any paper in the slot
when printing on paper from Tray1 or Tray2.
NOTE
• You can print using Legal, Ledger and A3 paper only from the manual feed slot.
• When you are feeding Legal, Ledger or A3 size paper in the manual feed slot, the machine holds the
printed page after printing so that the page does not fall. Once printing is complete, pull out the printed
page and press OK.
• (For MFC-J4710DW)
You can also print using Legal, Ledger and A3 paper from Tray2.
Print Preview
1
You can preview a document before it is printed. If you check the Print Preview check box, the Print Preview
window will open before printing starts.
1
2
1 Page List Area
The Page List Area displays the page numbers for the actual pages that will be printed. If you chose a
page in this list, a preview of the print results for the page will be displayed in the Preview Area.
If you do not want to print a page, clear the check mark.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
2 Preview Area
The Preview Area displays a preview of the print results for the pages chosen in the Page List Area.
1
NOTE
• If the Booklet setting was chosen in the Printer driver settings, you cannot use the Print Preview function.
• If the 2-sided setting was chosen in the Printer driver settings, you cannot delete pages using the Page
List Area.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
Advanced tab
1
1
1
2
3
4
5
6
7
8
9
10
11
1 Color / Grayscale option
2 Color Settings button
3 Ink Save Mode check box
4 Scaling option
5 Mirror Print check box
6 Reverse Print check box
7 Use Watermark check box
8 Header-Footer Print check box
9 Other Print Options button
10 Default button
11 OK button
a Choose your setting for Color / Grayscale.
b Choose Ink Save Mode to help reduce ink consumption.
c Choose your setting for the Scaling feature.
Choose Off to print the document as it appears on your screen.
Choose Fit to Paper Size to enlarge or reduce the document to fit the paper size.
Choose Free to change the size.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
d You can choose reverse printing options.
Check Mirror Print to reverse the data from left to right.
Check Reverse Print to reverse the data from up to down.
1
NOTE
Mirror Print is not available when choosing Transparencies as a Media Type.
e You can print a logo or text onto your document as a watermark. You can choose one of the preset
watermarks, or you can use a bitmap file or text file that you have created.
f You can print the date and time from your computer's system clock, and the computer login user name
or your entered text on your document using Header-Footer Print.
NOTE
Header-Footer Print is not available if you are using Borderless.
g Click Other Print Options to set more Printer functions.
h Click OK to apply your chosen settings.
To return to the default settings, click Default, then OK.
Color/Grayscale
1
This function can be used to print documents in color, or black and white using grayscale.
Color Settings
1
Click Color Settings on the Advanced tab to see options for enhanced print settings.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
Color Enhancement (True2Life)
1
Checking the Color Enhancement (True2Life) option enables the True2Life feature. This feature analyzes
your image to improve its sharpness, white balance and color density. This process may take several minutes
depending on the size of the image and the specifications of your computer.
1
Color Density
Adjusts the total amount of color in the image. You can increase or decrease the amount of color in an
image to improve a washed out or weak-looking picture.
White Balance
Adjusts the hue of the white areas of an image. Lighting, camera settings and other influences will affect
the appearance of white. The white areas of a picture may be slightly pink, yellow or some other color. By
adjusting the white balance you can adjust those white areas.
Brightness
Adjusts the brightness of the whole image. To lighten or darken the image, move the slider to the right or
left.
Contrast
Adjusts the contrast of an image. This will make darker areas darker and lighter areas lighter. Increase the
contrast when you want an image to be clearer. Decrease the contrast when you want an image to be more
subdued.
Red
Increases the intensity of Red in the image to make the image redder.
Green
Increases the intensity of Green in the image to make the image greener.
Blue
Increases the intensity of Blue in the image to make the image bluer.
Bi-Directional Printing
1
When Bi-Directional Printing is checked, the print head prints in both directions offering faster print speeds.
When unchecked, the print head will only print in one direction giving higher quality printouts, but slower
printing speeds.
Improve Pattern Printing
1
Select the Improve Pattern Printing option if the printed fills and patterns appear different to how they
appear on your screen.
Ink Save Mode
1
When you choose Ink Save Mode, the machine prints the colors lighter and emphasizes the outlines of the
images. The amount of ink that is saved varies depending on the type of documents that are printed.
Ink Save Mode may make your printouts look different to what you see on your screen.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
1
Ink Save Mode: Off
1
Ink Save Mode: On
1
(The above screens are used in ISO/IEC 24712.)
Use Watermark
1
You can print a logo or text onto your document as a watermark. You can choose one of the preset
watermarks, or you can use a bitmap file or text file that you have created.
Check Use Watermark and then click Settings on the Advanced tab.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
Watermark Settings
1
1
Choose a watermark you want to use or edit from Select Watermark.
Transparent
1
1
1
Check Transparent to print the watermark image in the background of your document. If this feature is
unchecked, the watermark is printed at the front of your document.
In Outline Text
Check In Outline Text if you only want to print an outline of the watermark. This feature is available when
choosing a text watermark.
Custom Settings
You can choose a watermark to be printed on the first page or on the other pages.
You can change watermark settings and add a new watermark. Click Settings to change the settings or click
Add to add a new watermark.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
1
You can change the watermark settings with this feature. If you want to add a new watermark, enter Title and
then choose Use Text or Use Bitmap File in Watermark Style.
Title
Enter a suitable title into the field when adding a new watermark. Your chosen watermark is overwritten
with this title.
Text
Enter your watermark text in the Text box, then choose Font, Style, Size and Choose Color.
Bitmap
Enter a file name and location of your bitmap image in File, or click Browse to search for the file. You can
also configure the scaling size and transparency of the image.
Position
Use this setting if you want to adjust the position of the watermark on the page.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
Header-Footer Print
1
1
You can print the date and time from your computer's system clock, and the computer login user name or
your entered text on your document. To customize the settings, click Settings on the Advanced tab.
ID Print
1
You can choose your computer login user name or your entered text as a header or footer from the following
ways:
Choosing Login User Name to print your computer login user name.
Choosing Custom to print your entered text in the Custom text box.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
Other Print Options
1
1
Click Other Print Options on the Advanced tab to set more printer functions.
NOTE
The screen shown in this section may vary depending on your machine.
Change Data Transfer Mode
1
The Change Data Transfer Mode feature lets you choose a print data transfer mode to improve print quality
or print speed.
Recommended Setting
Choose Recommended Setting for general use.
Improved Print Quality
Choose Improved Print Quality for better print quality. Print speed may be slightly reduced, depending
on the print data.
Improved Print Speed
Choose Improved Print Speed for faster print speed. Print quality may be slightly reduced, depending on
the print data.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
Advanced Color Settings
1
You can set the Halftone Pattern and Match Monitor for more color adjustment.
Halftone Pattern
1
The machine can use two methods (Diffusion or Dither) to arrange dots to express halftones. There are
some predefined patterns and you can choose which one to use for your document.
• Diffusion
Dots are put at random to create the halftones. Use for printing photographs that have delicate shades
and graphics.
• Dither
Dots are arranged in a pre-defined pattern to make halftones. Use for printing graphics that have
definite color boundaries or for printing charts such as business charts.
Match Monitor
Color is adjusted to get the closest color match with the monitor.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
Advanced 2-sided Settings
1
Some types of print media may need more drying time when using the 2-sided feature. Change
Advanced 2-sided Settings if you have problems with smudged 2-sided prints or paper jams.
1
Normal
Choose Normal to print at a typical speed, using a normal amount of ink.
2-sided 1 (Slower print speed)
Choose 2-sided 1 to print at a slower speed, using a normal amount of ink.
2-sided 2 (Slower print speed & less ink)
Choose 2-sided 2 to print the same speed as using 2-sided 1, but using less ink.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
Retrieve Printer’s Color Data
1
This setting helps to optimize print quality by retrieving color data from your specific device. Use this option
when you replace the device or change the network connected device.
1
Use Printer’s Color Data
Check this box if you want to use the printer’s color data. Remove the check mark if you do not want to
use the information.
Retrieve Printer’s Color Data
If you click this button, the printer driver starts retrieving the color data of your device. This may take time.
Depending on the device status, the printer driver may fail to retrieve the color data.
NOTE
• To show this feature, open the printer driver window using the appropriate procedure below, and then click
Other Print Options on the Advanced tab.
®
(Windows XP)
Choose and right-click Brother MFC-XXXX Printer (where XXXX is your model name) located in
Start/Printers and Faxes, and then choose Printing Preferences.
®
(Windows Vista )
Choose and right-click Brother MFC-XXXX Printer (where XXXX is your model name) located in
/Control Panel/Hardware and Sound/Printers, and then choose Printing Preferences.
®
(Windows 7)
Choose and right-click Brother MFC-XXXX Printer (where XXXX is your model name) located in
/Devices and Printers, and then choose Printing Preferences.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
• When an error message dialog box appears, confirm that your computer and your Brother machine are
correctly connected, and then retry.
1
• After retrieving the printer’s color data, your computer will save the data and apply it to printing.
• If your Brother machine is connected to multiple computers, do this feature on each computer connected.
• You can retrieve the printer’s color data only from the printer server if the printer is shared.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
Print Profiles tab
1
1
Print Profiles are editable presets designed to give you quick access to frequently used printing
configurations.
6
1
2
3
5
4
1 Print profile list box
2 Delete Profile button
3 Always show Print Profiles tab first check box
4 OK button
5 Add Profile button
6 Current print profile view
a Choose your profile from the print profile list box.
b If you want to display the Print Profiles tab at the front of the window from the next time you print, check
Always show Print Profiles tab first.
c Click OK to apply your chosen profile.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
Add Profile
1
1
The Add Profile dialog box appears by clicking Add Profile. You can add 20 new profiles with your preferred
settings.
a Enter the desired title in Name.
b Choose an icon you want to use from the Icon list, then click OK.
c The current settings shown on the left side of the printer driver window will be saved.
Delete Profile
1
The Delete Profile dialog box appears by clicking Delete Profile. You can delete any of the profiles you have
added.
a Choose a profile you want to delete from the profile list box.
b Click Delete.
c The selected profile will be deleted.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
Maintenance tab
1
1
To maintain good print quality, the machine will automatically clean the print head when needed. You can
also start the cleaning process manually if there is a print quality problem.
Test Print
You can print the test page and check the print quality.
Standard Cleaning
You can clean the machine’s print head manually. Clean the print head if a vertical line appears in text or
graphics, or if blank spaces appear in the text on printed pages. You can choose three types of print head
cleaning: All, Black, or Color.
Advanced Cleaning
You can manually clean the print head more thoroughly than Standard Cleaning. Choose this option if
Standard Cleaning does not resolve your print quality problems. You can choose three types of print
head cleaning: All, Black, or Color.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
Support
1
1
The Support window shows the driver version and settings information. There are also links to the
Brother Solutions Center and Genuine Supplies Website.
Click Support on the printer driver window to display the Support window:
Brother Solutions Center
The Brother Solutions Center is a website offering information about Brother product including FAQs
(Frequently Asked Questions), user’s guide, driver updates and tips for using your machine.
Genuine Supplies Website
The Genuine Supplies Website offers information about your Brother genuine supplies.
Brother CreativeCenter
The Brother CreativeCenter is a FREE website where you can access many ideas and resources for
personal and professional use.
Check Setting
This function provides information on the current printer driver settings.
About
This function provides information about the printer driver installed for your Brother machine.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
Using FaceFilter Studio for photo printing by REALLUSION
1
1
FaceFilter Studio is an easy-to-use borderless photo printing application. FaceFilter Studio also lets you edit
your photo data. You can add photo effects such as red eye reduction or skin tone enhancement.
To use FaceFilter Studio, you must install the FaceFilter Studio application from the CD-ROM supplied with
your machine. Install FaceFilter Studio and download FaceFilter Studio Help by following the instructions in
the Quick Setup Guide.
You can start FaceFilter Studio by clicking on
/All Programs/Reallusion/FaceFilter Studio/FaceFilter Studio.
Before you start FaceFilter Studio for the first time, you must make sure your Brother machine is turned On,
and connected to your computer. This will allow you to access all the functions of FaceFilter Studio.
NOTE
If your Brother machine is not turned On, or connected to your computer, FaceFilter Studio will start with
limited features. You will not be able to use the Print function.
This chapter only introduces the basic functions of the software. For more details, see the FaceFilter Studio
Help.
To view the complete FaceFilter Studio Help, click
/All Programs/Reallusion/FaceFilter Studio/FaceFilter Studio Help.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
Starting FaceFilter Studio with your Brother machine turned on
1
1
a When you launch FaceFilter Studio for the first time, this screen will appear, if your Brother machine is
turned on, and connected to your computer, the FaceFilter Studio will detect your Brother machine.
b After you click Continue in step a, this screen will appear. FaceFilter Studio is ready to use with full
functionality.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
Starting FaceFilter Studio when your Brother machine is turned off
1
1
a When you launch FaceFilter Studio for the first time, if your Brother machine is turned off or not
connected to your computer, this screen will appear.
Turn on your Brother machine and check that it is connected to your computer and then click Yes.
c If FaceFilter Studio does not detect the Brother machine, this screen will appear.
Make sure your Brother machine is turned on and click Retry.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
e After you click the check mark in step d, FaceFilter Studio will start with limited functionality. The Print
icon on the top menu will be grayed out and you will not be able to use the Print function.
1
NOTE
• When FaceFilter Studio starts with limited functionality, the image file will be saved with a watermark.
• To start FaceFilter Studio with full functionality, see Starting FaceFilter Studio with your Brother machine
Printing an image
1
a Click the Open icon to choose the image file.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
b Click the Print icon in the top menu bar to move to the print screen.
1
c Click the Print icon on the left to open the print settings dialog box.
d Choose Paper Size, Paper Source, Orientation, number of Copies, Scaling and Printing Area.
NOTE
If you want to print a borderless photo, choose Full Page Photo in Scaling.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
e Click Print Setting and choose your Brother machine. Click OK.
1
NOTE
If you want to use photo paper, click Properties and set the Media Type and Print Quality in the printer
driver dialog box.
f Click Print in the Print settings dialog box and your photo will print.
Smart Portrait
1
The Smart Portrait function detects faces in the photo and adjusts the brightness of the skin tone
automatically.
a Open the image file.
b Click the Smart Portrait
icon to detect faces automatically.
c You can modify the Brightness adjustment by dragging the slider.
d Click OK.
Red-eye Reduction
1
The Red Eye Reduction function lets you reduce red eyes in your photo.
a Open the image file.
b Click the Red Eye Reduction
icon to reduce red eyes automatically.
c Auto Red eye Detection finds all the red eyes in the image and marks them as dotted boxes. You can
use the RedEye Threshold slider to adjust the color of the marked areas.
d Click OK.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
Print Expression List
1
1
FaceFilter Studio lets you modify a facial expression by applying an expression template or by manual
adjustment. In the Select Expression step, you can preview or print the expression list of your choice.
Uninstalling FaceFilter Studio
1
To uninstall FaceFilter Studio, choose
/All Programs/Reallusion/FaceFilter Studio/Uninstall FaceFilter Studio.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
2
2
The scanning operations and the drivers used will be different depending on your operating system or the
scanning application used.
2
Two scanner drivers are installed. A TWAIN compliant scanner driver (See Scanning a document using the
®
®
®
®
Windows XP/Windows Vista /Windows 7 users can select either driver when scanning documents.
NOTE
• If your computer is protected by a firewall and is unable to network scan, you may need to configure the
®
firewall settings to allow communication through port number 54925 and 137. If you are using Windows
Firewall and you installed MFL-Pro Suite from the CD-ROM, the necessary Firewall settings have already
Scanning a document using the TWAIN driver
2
The Brother MFL-Pro Suite software includes a TWAIN compliant scanner driver. TWAIN drivers meet the
standard universal protocol for communicating between scanners and applications. This means that you can
not only scan images directly into the PaperPort™ 12SE viewer that Brother included with your machine, but
you can also scan images directly into hundreds of other software applications that support TWAIN scanning.
®
®
®
These applications include popular programs like Adobe Photoshop , CorelDRAW and many more.
Scanning a document into the computer
2
There are two ways in which you can scan a whole page. You can either use the ADF (automatic document
feeder) or the scanner glass.
a Load your document.
b Start the Nuance™ PaperPort™ 12SE software that was installed during the MFL-Pro Suite installation
to scan a document.
NOTE
• The Nuance™ PaperPort™ 12SE may not be available depending on the model of your machine. If it is
not available, please use other software applications.
• The instructions for scanning in this guide are for when you use Nuance™ PaperPort™ 12SE. The
scanning steps may vary when using other software applications.
c Click Scan Settings from the Desktop tab on the ribbon.
The Scan or Get Photo panel appears on the left side of the screen.
d Click Select.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
e Choose TWAIN: TW-Brother MFC-XXXX or TWAIN: TW-Brother MFC-XXXX LAN from the
Available Scanners list.
(Where XXXX is your model name.)
f Check the Display scanner dialog box on the Scan or Get Photo panel.
2
g Click Scan.
The Scanner Setup dialog box appears.
h Adjust the following settings, if needed, in the Scanner Setup dialog box:
1
2
3
4
5
6
7
8
9
1 Scan (Image Type)
2 Resolution
3 Scan Type
4 Reduce Noise
5 Brightness
6 Contrast
7 Document Size
8 Auto Crop
9 2-sided Scanning (For MFC-J4710DW)
i Click Start.
When scanning is finished, click Cancel to return to the PaperPort™ 12SE window.
NOTE
• After you select a document size, you can adjust the scanning area further by clicking the left mouse button
and dragging it. This is required when cropping an image for scanning.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
• About 2-sided scanning (For MFC-J4710DW):
You cannot adjust the scanning area.
You cannot use PreScan to preview an image.
2-sided scanning is available from the ADF only.
2
Pre-Scanning to crop a portion you want to scan
2
You can preview your image and crop unwanted portions before scanning by using the PreScan button.
When you are satisfied with the preview, click Start on the Scanner Setup dialog box to scan the image.
b Choose the settings for Scan (Image Type), Resolution, Scan Type, Brightness, Contrast and
Document Size as needed.
NOTE
Pre-Scanning is not available when choosing Auto Crop or 2-sided Scanning .
1
(For MFC-J4710DW)
c Click PreScan.
The whole image is scanned into the computer and appears in the scanning area of the Scanner Setup
dialog box.
d Press and hold down the left mouse button and drag it over the portion you want to scan.
1
1 Scanning area
NOTE
You can enlarge the image using the
original size.
icon, and then use the
icon to restore the image to its
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
e Load your document again.
NOTE
2
f Click Start.
This time only the chosen area of the document appears in the PaperPort™ 12SE window (or your
application window).
g In the PaperPort™ 12SE window, use the options available to refine the image.
Auto Crop
2
You can scan multiple documents placed on the scanner glass by checking Auto Crop. When using
Auto Crop, the machine will scan each document and create separate files. For example, if you place three
documents on the scanner glass, the machine will scan and create three separate files. If you want to create
a three page file, scan the documents as PDF.
1
A4
A4
1
3
4
2
1
1 0.4 in. (10 mm) or greater
2 0.8 in. (20 mm) or greater (bottom)
Guidelines for Auto Crop
2
This setting is only available for documents that are rectangular or square.
If your document is too long or wide, this setting does not work properly.
When you use this setting, you must use the scanner glass.
When you use this setting, you must choose a Document Size other than Auto.
You must place the documents away from the edges of the scanner glass as shown in the illustration.
You must place the documents at least 0.4 in. (10 mm) apart from each other.
Auto Crop adjusts the skew of the document on the scanner glass, but if your document is skewed more
than 10 degrees, this setting will not work.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
Settings in the Scanner Setup dialog box
2
Scan (Image Type)
2
2
Choose the output image type from Photo, Web or Text. Resolution and Scan Type will be automatically
altered for each of the default settings.
The default settings are listed in the table below:
Scan (Image Type)
Resolution
300 x 300 dpi
Scan Type
24bit Color
24bit Color
Black & White
Photo
Web
Use for scanning photo images
Use for attaching the scanned image to web pages 100 x 100 dpi
Text
Use for scanning text documents
200 x 200 dpi
Resolution
2
You can choose a scanning resolution from the Resolution drop-down list. Higher resolutions take more
memory and transfer time, but produce a finer scanned image. The following table shows the resolutions you
can choose and the available colors.
Resolution
Black & White/
256 Color
True Gray/24bit Color
Gray (Error Diffusion)
100 x 100 dpi
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
150 x 150 dpi
200 x 200 dpi
300 x 300 dpi
400 x 400 dpi
600 x 600 dpi
1200 x 1200 dpi
2400 x 2400 dpi
4800 x 4800 dpi
9600 x 9600 dpi
19200 x 19200 dpi
No
No
No
No
Scan Type
2
Black & White
Use for text or line art images.
Gray (Error Diffusion)
Use for photographic images or graphics. (Error Diffusion is a method for creating simulated gray images
without using true gray dots. Black dots are put in a specific pattern to give a gray appearance.)
True Gray
Use for photographic images or graphics. This mode is more exact due to using up to 256 shades of gray.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
256 Color
Uses up to 256 colors to scan the image.
24bit Color
2
Uses up to 16.8 million colors to scan the image.
Although using 24bit Color creates an image with the most accurate color reproduction, the image file size
will be about three times larger than a file created using the 256 Color option. It requires the most memory
and has the longest transfer time.
Reduce Noise
2
You can improve and enhance the quality of your scanned images with this selection. The Reduce Noise
setting is available when using 24bit Color and scan resolutions of 300 300 dpi, 400 400 dpi or
600 600 dpi.
Auto Crop
2
You can scan multiple documents placed on the scanner glass. If you want to use Auto Crop, see Auto Crop
Brightness
2
Adjust the setting (-50 to 50) to get the best image. The default value is 0, representing an average and is
usually suitable for most images.
You can set the Brightness level by dragging the slider to the right or left to lighten or darken the image. You
can also enter a value in the box to set the level.
If the scanned image is too light, set a lower Brightness level and scan the document again. If the image is
too dark, set a higher Brightness level and scan the document again.
NOTE
The Brightness setting is only available when setting the Scan Type to Black & White,
Gray (Error Diffusion), True Gray or 24bit Color.
Contrast
2
You can increase or decrease the contrast level by moving the slider to the right or left. An increase
emphasizes dark and light areas of the image, while a decrease reveals more details in gray areas. You can
also enter a value in the box to set the Contrast.
NOTE
The Contrast setting is only available when setting the Scan Type to Gray (Error Diffusion),
True Grayor 24bit Color.
When scanning photographs or other images for use in a word processor or other graphics application, try
different settings for the Resolution, Scan Type, Brightness and Contrast to see which setting best suits
your needs.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
Document Size
2
Choose one of the following sizes:
Auto
2
You can scan a standard sized document without any further adjustments to Document Size. If you want
to use Auto Crop, choose a Document Size other than Auto.
A4 8.3 x 11.7 in (210 x 297 mm)
JIS B5 7.2 x 10.1 in (182 x 257 mm)
Letter 8 1/2 x 11 in (215.9 x 279.4 mm)
Legal 8 1/2 x 14 in (215.9 x 355.6 mm) (Available on ADF models)
A5 5.8 x 8.3 in (148 x 210 mm)
JIS B6 5 x 7.2 in (128 x 182 mm)
A6 4.1 x 5.8 in (105 x 148 mm)
Executive 7 1/4 x 10 1/2 in (184.1 x 266.7 mm)
Business Card 3.5 x 2.4 in (90 x 60 mm)
To scan business cards, choose the Business Card size, and then put the business card face down at
the top left of the scanner glass.
4 x 6 in (10 x 15 cm)
5 x 8 in (13 x 20 cm)
3.5 x 5 in (9 x 13 cm)
5 x 7 in (13 x 18 cm)
Postcard 1 3.9 x 5.8 in (100 x 148 mm)
Postcard 2 (Double) 5.8 x 7.9 in (148 x 200 mm)
Custom
If you choose Custom as the size, the Custom Document Size dialog box appears.
Enter the Custom Document Size Name, Width and Height of the document.
You can choose “mm” or “inch” as the unit for Width and Height.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
NOTE
You can see the actual paper size you chose on the screen.
2
• Width: shows the width of scanning area.
• Height: shows the height of scanning area.
• Data Size: shows the approximate data size in Bitmap format. The size will vary depending on the type
of file, resolution and number of colors used.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
Scanning a document using the WIA driver
2
WIA compliant
2
2
®
®
®
®
For Windows XP/Windows Vista /Windows 7 you can choose Windows Imaging Acquisition (WIA) when
scanning images. You can scan images directly into the PaperPort™ 12SE viewer that Brother included with
your machine or you can scan images directly into any other applications that support WIA or TWAIN
scanning.
NOTE
(For MFC-J4710DW)
®
Windows XP does not support 2-sided scan in the WIA driver.
If you want to do 2-sided scanning, use the TWAIN driver. For more information, see Scanning a document
Scanning a document into the computer
2
There are two ways to scan a whole page. You can either use the ADF (automatic document feeder) or the
Flatbed scanner glass.
If you want to scan and then crop a portion of a page after pre-scanning the document, you must scan using
the scanner glass (Flatbed). (See Pre-Scanning and cropping a portion using the scanner glass on page 49.)
a Load your document.
b Start the Nuance™ PaperPort™ 12SE software that was installed during the MFL-Pro Suite installation
to scan a document.
NOTE
• Depending on your model Nuance™ PaperPort™ 12SE may not be included. If it is not included, please
use other software applications that support scanning.
• The instructions for scanning in this guide are based on Nuance™ PaperPort™ 12SE. The process will
vary when scanning from other applications.
c Click Scan Settings from the Desktop tab on the ribbon.
The Scan or Get Photo panel appears on the left side of the screen.
d Click Select.
e Choose WIA:Brother MFC-XXXX or WIA:Brother MFC-XXXX LAN from the Available Scanners list.
(Where XXXX is your model name.)
NOTE
If you choose TWAIN: TW-Brother MFC-XXXX, the TWAIN driver will start.
f Check the Display scanner dialog box on the Scan or Get Photo panel.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
g Click Scan.
The Scan dialog box appears.
h Adjust the following settings, if needed, in the Scanner Setup dialog box:
2
1
2
3
4
5
6
1 Paper source
2 Picture type
3 Adjust the quality of the scanned picture
4 Page size
5 Preview
6 Scan
i Choose Document Feeder or Flatbed from the Paper source drop-down list.
NOTE
If your machine has no Auto Document Feeder (ADF), you cannot choose Document Feeder.
j Choose the picture type.
k Choose the Page size from the drop-down list.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
l If you want to change some advanced settings, click Adjust the quality of the scanned picture. You
can choose Brightness, Contrast, Resolution and Picture type from Advanced Properties. Click OK
after choosing the settings.
2
NOTE
By default, the scanner resolution can be set to a maximum of 1200 dpi. If you want to scan at higher
m Click Scan in the Scan dialog box.
The machine starts scanning the document.
Pre-Scanning and cropping a portion using the scanner glass
2
The Preview button is used to preview an image for cropping any unwanted portions from the image. When
you are satisfied with the preview, click Scan on the Scan dialog box to scan the image.
b Choose Flatbed from the Paper source drop-down list.
NOTE
If your machine has no Auto Document Feeder (ADF), you do not need to specify the Paper source.
c Choose the picture type.
d Click Preview.
The whole image is scanned into the computer and appears in the scanning area.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
e Press and hold down the left mouse button and drag it over the portion you want to scan.
2
f If you need advanced settings, click Adjust the quality of the scanned picture. You can choose
Brightness, Contrast, Resolution and Picture type from Advanced Properties. Click OK after
choosing settings.
g Click Scan in the Scan dialog box.
The machine starts scanning the document.
This time only the chosen area of the document appears in the PaperPort™ 12SE window (or your
application window).
Scanner Utility
2
The Scanner Utility is used to configure the WIA scanner driver for resolutions greater than 1200 dpi.
NOTE
If you scan the document at a resolution of greater than 1200 dpi, the file size may be very large. Make
sure that you have enough memory and hard disk space for the size of the file you are trying to scan. If
you do not have enough memory or hard disk space then your computer may freeze and you could lose
your file.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
Running the utility
You can run the utility by clicking the Scanner Utility located in
menu (where XXXX is your model name)/Scanner Settings.
/All Programs/Brother/MFC-XXXX
2
Screens on your computer may vary depending on your operating system or the model of your machine.
NOTE
®
®
(Windows Vista and Windows 7)
When the User Account Control screen appears, do the following.
• For users who have administrator rights: Click Allow or Yes.
• For users who do not have administrator rights: Enter the administrator password and click OK or Yes.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
Scanning a document using the WIA driver
®
®
(Windows Photo Gallery and Windows Fax and Scan users)
2
2
Scanning a document into the computer
2
There are two ways to scan a whole page. You can either use the ADF (automatic document feeder) or the
Flatbed scanner glass.
If you want to scan and then crop a portion of a page after pre-scanning the document, you must scan using
the scanner glass (Flatbed). (See Pre-Scanning and cropping a portion using the scanner glass on page 54.)
a Load your document.
b Open your software application to scan the document.
c Do one of the following:
®
Windows Photo Gallery
Click File, then Import from Camera or Scanner.
®
Windows Fax and Scan
Click File, New, then Scan.
d Choose the scanner you want to use.
e Do one of the following:
®
Windows Photo Gallery
Click Import.
®
Windows Fax and Scan
Click OK.
The Scan dialog box appears.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
f Adjust the following settings, if needed, in the Scanner dialog box:
1
2
3
2
5
6
7
10
8
9
11
12
1 Scanner
2 Profile
3 Source
4 Paper size
5 Color format
6 File type
7 Resolution
8 Brightness
9 Contrast
10 Scanning area
11 Preview
12 Scan
NOTE
• By default, the scanner resolution can be set to a maximum of 1200 dpi. If you want to scan at higher
• If you want to use Web Services to scan, choose a scanner that supports Web Services. See Using Web
• If you want to do 2-sided scanning, choose Feeder (Scan both sides) as Source (For MFC-J4710DW).
g Click Scan on the Scan dialog box.
The machine starts scanning the document.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
Pre-Scanning and cropping a portion using the scanner glass
2
The Preview button is used to preview an image for cropping any unwanted portions from the image. When
you are satisfied with the preview, click Scan in the Scan dialog box to scan the image.
2
a Put the document face down on the scanner glass.
c Choose Flatbed from the Source drop-down list. Adjust the settings, if needed, in the Scanner dialog
box.
NOTE
If your machine has no Auto Document Feeder (ADF), you do not need to specify the Source.
d Click Preview.
The whole image is scanned into the computer and appears in the scanning area.
e Press and hold down the left mouse button and drag it over the portion you want to scan.
f Click Scan on the Scan dialog box.
The machine starts scanning the document.
This time only the chosen area of the document appears in your application window.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
Using Nuance™ PaperPort™ 12SE
2
NOTE
®
Nuance™ PaperPort™ 12SE supports Windows XP (SP3 or higher), XP Professional x64 Edition (SP2
2
®
®
or greater), Windows Vista (SP2 or higher) and Windows 7 only.
Nuance™ PaperPort™ 12SE for Brother is a document management application. You can use PaperPort™
12SE to view scanned documents.
PaperPort™ 12SE has a sophisticated, yet easy-to-use filing system that will help you organize your graphics
and text documents. It allows you to mix or ‘stack’ documents of different formats for printing, faxing or filing.
This section only introduces the basic functions of the software. For more details, see the Nuance™
PaperPort™ 12SE Getting Started Guide. To view the complete Nuance™ PaperPort™ 12SE
Getting Started Guide, choose the Help tab from the ribbon and click Getting Started Guide. When you
install MFL-Pro Suite, Nuance™ PaperPort™ 12SE for Brother is installed automatically. You can access
Nuance™ PaperPort™ 12SE through the Nuance™ PaperPort™ 12SE program group located in
/All Programs/Nuance PaperPort 12 on your computer.
Viewing items
2
Nuance™ PaperPort™ 12SE gives several ways to view items:
Desktop displays the item in the chosen folder with a thumbnail (a small graphic that shows each item in a
desktop or folder) or an icon.
You can see both PaperPort™ 12SE items (MAX files) and non-PaperPort™ 12SE items (files created using
other applications).
All graphical files (PaperPort™ 12SE's *.max and other files) will be displayed and include an icon that
indicates the application that the specific file type is associated or created with. Non-graphical files are
indicated by a small rectangular thumbnail and are not displayed as actual images.
ImageView displays a close-up of a single page. You can open a PaperPort™ 12SE item by clicking the
Open with Image View button from the Desktop tab on the ribbon.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
As long as you have the appropriate application on your computer to display it, you can also open a non-
PaperPort™ 12SE item by double-clicking it.
2
Organizing your items in folders
2
PaperPort™ 12SE has an easy-to-use filing system for organizing your items. The filing system consists of
folders and items that you choose to view in Desktop. An item can be a PaperPort™ 12SE item or a non-
PaperPort™ 12SE item:
Folders are arranged in a ‘tree’ structure in the Folder View. You use this section to choose folders and
view their items in Desktop.
You can simply drag and drop an item onto a folder. When the folder is highlighted, release the mouse
button and the item is stored in that folder.
Folders can be ‘nested’—that is, stored in other folders.
When you double-click a folder, its contents (both PaperPort™ 12SE MAX files and non PaperPort™
12SE files) appear in Desktop.
®
You can also use Windows Explorer to manage the folders and items shown in Desktop.
Quick links to other applications
2
Nuance™ PaperPort™ 12SE automatically recognizes many other applications on your computer and
creates a ‘working link’ to them.
The bar at the bottom of the PaperPort™ 12SE desktop shows which programs you can use with PaperPort™
12SE.
To send an item from PaperPort™ 12SE to another program, simply drag and drop the item from the
PaperPort™ 12SE desktop to the program icon on the bar. PaperPort™ 12SE automatically converts the item
to the preferred format.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
If PaperPort™ 12SE does not automatically recognize one of the applications on your computer, you can
manually create a link using the New Link button from the Tools tab on the ribbon.
Nuance™ PaperPort™ 12SE lets you convert image text into text you can edit
2
2
Nuance™ PaperPort™ 12SE can quickly convert a text document image into text that you can edit with a
word processing application.
PaperPort™ 12SE uses the optical character recognition software (OCR), which comes with PaperPort™
12SE. PaperPort™ 12SE can use your preferred OCR application if it is already on your computer. You can
convert the entire item, or by using the Copy Text button from the Items tab on the ribbon, you can choose
only a portion of the text to convert.
Dragging an item onto a word-processing link icon starts PaperPort™ 12SE’s built-in OCR application, or you
can use your own OCR application.
Importing items from other applications
2
As well as scanning items, you can import items into PaperPort™ 12SE in a variety of ways and convert them
to PaperPort™ 12SE (MAX) files in several different ways:
®
Print to the Desktop from another application, such as Microsoft Word.
®
Import files saved in other file formats, such as Windows Bitmap (BMP) or Tagged Image File Format
(TIFF).
Exporting items into other formats
2
You can export or save PaperPort™ 12SE items in several popular file formats, such as BMP, JPEG, TIFF
or PDF.
Exporting an image file
2
a Click Save As on the PaperPort button.
The Save ‘XXXXX’ as dialog box is displayed.
b Choose the drive and folder where you want to store the file.
c Enter the new file name and choose the file type.
d Click Save to save your file, or Cancel to return to PaperPort™ 12SE without saving it.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
Uninstalling Nuance™ PaperPort™ 12SE
2
®
(Windows XP)
2
2
a Click Start, Control Panel, Add or Remove Programs, and click the Change or Remove Programs
icon.
b Choose Nuance PaperPort 12 from the list and click Change or Remove.
®
®
(Windows Vista and Windows 7)
2
a Click the
button, Control Panel, Programs and Programs and Features.
b Choose Nuance PaperPort 12 from the list and click Uninstall.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
Using BookScan Enhancer and Whiteboard Enhancer by
REALLUSION
2
BookScan Enhancer and Whiteboard Enhancer are image processing applications. BookScan Enhancer can
automatically correct images scanned from books. Whiteboard Enhancer can clean up and enhance text and
images in photos taken of a whiteboard.
2
Installing BookScan Enhancer and Whiteboard Enhancer
2
a Insert the supplied CD-ROM into your CD-ROM drive.
b The CD-ROM top menu will appear automatically. Choose the desired language and then click
Additional Applications.
c Click BookScan&Whiteboard Suite.
Follow the on-screen instructions.
For details, see the BookScan&Whiteboard Suite Help located in
/All Programs/Reallusion/BookScan&Whiteboard Suite on your computer.
NOTE
• The machine must be turned on and connected to the computer.
• The computer must be connected to the Internet.
• Make sure you are logged on with Administrator access privileges.
®
• These applications are not available for Windows Server 2003/2008 series.
• If the Brother screen does not appear automatically, go to My Computer or Computer then double-click
the CD-ROM icon and double-click start.exe.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter4
3
3
Overview
3
ControlCenter4 is a software utility that lets you quickly and easily access your often used applications. Using
ControlCenter4 eliminates the need to manually launch specific applications.
3
ControlCenter4 also controls the settings for the Scan button on your Brother machine. For information about
how to configure the settings for the Scan button on the machine, see Configuring the Scan button settings
ControlCenter4 has two user interfaces: Home Mode and Advanced Mode.
Home Mode
Advanced Mode
The Advanced Mode gives you more control over the details of your machine’s functions. You can add
up to three customized tabs in your original settings. See Using ControlCenter4 in Advanced Mode
Changing the user interface
3
a Click Configuration and then select Mode Select.
b Select Home Mode or Advanced Mode in the mode dialog box.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter4
Using ControlCenter4 in Home Mode
3
This section briefly introduces the ControlCenter4 function in Home Mode. For more details of each function,
click
(Help).
1
2
3
4
5 6
7
8
3
9
1 Print or edit images, attach images to E-mail, open images with an application and copy images from a
memory card or USB Flash memory drive.
2 Scan directly to a file, E-mail, word processor or graphics application of your choice.
3 Access the PC-FAX applications available for your device. (For MFC models)
4 Access the settings available to configure your device.
5 Link to Brother Solutions Center, Brother CreativeCenter or the Help file.
6 You can select which machine ControlCenter4 will connect to from the Model drop-down list.
7 You can change the user interface and ControlCenter4 preferences.
8 Access the Help file.
9 Access Status Monitor by clicking the device status button.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter4
Photo tab
3
There are five functions: Print, Edit, Open with an Application, Send E-mail and Photo Capture. This
section briefly introduces these functions. For more details of each function, click
(Help).
3
1
2
3
4
5
6
7
1 Photo Capture button
2 My CC4 Folder button
3 Desktop button
4 Print button
5 Edit button
6 Send E-mail button
7 Open with an Application button
Copying images from a memory card or USB Flash memory drive
3
The Photo Capture button lets you copy images on a memory card or USB Flash memory drive to a folder
on your hard disk.
a Click Photo Capture, and the Photo Capture dialog box appears.
b Configure your settings for the Destination Folder, then click OK.
c The images on a memory card or USB Flash memory drive will be copied to a folder on your hard disk.
Opening the ControlCenter4 folder tree
3
The My CC4 Folder button lets you open the ControlCenter4 folder located in the My Pictures folder on your
computer. You can choose images you want to print, edit, attach to an E-mail or open with a specific
application directly from the ControlCenter4 folder.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter4
Opening the folder tree
3
The Desktop button lets you open the folder tree from the desktop to choose images you want to print, edit,
attach to an E-mail or open with a specific application directly.
Printing images
3
3
The
(Print) button lets you print images.
a Choose images you want to print by clicking the image from the image viewer, check the check box
under the image, and then enter the number of copies you want to print (1 to 99).
b Click
(Print). The print setting window will appear.
c Configure the settings for Paper Size, Media Type and Layout.
d Click Properties to configure Print Quality, Color / Grayscale and Color Mode if necessary.
(For MFC-J4610DW/J4710DW)
Click Properties to configure Paper Source if necessary.
NOTE
If you want to print the image timestamp in the lower-right corner of the image, check the Print Date check
box.
e Click OK.
f Click
(Start Printing).
Editing images
3
The
(Edit) button lets you edit images with various functions.
a Choose images you want to edit by clicking the image from the image viewer.
b Click
c Edit the images with Trimming, Image Correction and Image Enhancement functions.
d Click (Save).
(Edit). The edit window will appear.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter4
Attaching images to E-mail
3
The
(Send E-mail) button lets you attach images to your default E-mail application.
a Choose images you want to attach to E-mail from the image viewer.
3
b Click
(Send E-mail), and your default E-mail application starts and shows a new E-mail with
attachments.
NOTE
The Send E-mail feature does not support Webmail services.
Opening images with an application
3
The
a Choose images you want to open by clicking the image from the image viewer.
b Click (Open with an Application).
(Open with an Application) button lets you open images with a specific application directly.
c Select the application from the drop-down list and click OK.
d The image will appear in the application you have chosen.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter4
Scan tab
3
There are five scan options: Save, Print, Open with an Application, Send E-mail and OCR.
This section briefly introduces the Scan tab function. For more details of each function, click
(Help).
1
2
3
3
4
5
6
7
1 PC Scan setting area
2 Image viewer
3 Save button
4 Print button
5 Open with an Application button
6 Send E-mail button
7 OCR button
66
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter4
File types
3
You can choose a file type to save the scanned image as from the following list:
For Save and Send E-mail
3
®
Windows Bitmap (*.bmp)
3
JPEG (*.jpg)
TIFF (*.tif)
TIFF Multi-Page (*.tif)
Portable Network Graphics (*.png)
PDF (*.pdf)
High Compression PDF (*.pdf)
Secure PDF (*.pdf)
Searchable PDF (*.pdf)
XML Paper Specification (*.xps)
For OCR
3
HTML (*.htm)
Excel (*.xls)
Rich Text Format (*.rtf)
Word Perfect (*.wpd)
Text (*.txt)
Searchable PDF (*.pdf)
NOTE
®
®
• The XML Paper Specification is available for Windows Vista , Windows 7 or when using applications
which support XML Paper Specification files.
• If you set the file type to TIFF or TIFF Multi-Page, you can choose Uncompressed or Compressed.
Document Size
3
You can choose the document size from the Scan Size drop-down list. If you choose a 1 to 2 document size,
such as 1 to 2 (A4), the scanned image will be divided into two A5 size documents.
Advanced Settings
3
You can configure advanced settings by choosing Custom and then click Custom Settings. The
Custom Settings dialog box will appear, click Advanced Settings and the Advanced Settings dialog box
will appear.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter4
You can also configure advanced settings by clicking the Advanced Settings button in the scan settings
dialog box.
3
Remove Background Color
Removes the base color of documents to make the scanned data more recognizable. When you use this
function, you can select the level from 3 settings: high, medium, and low.
Skip Blank Page (For MFC-J4710DW)
Removes blank pages of the document from the scanning results.
Display Scanning Results (For MFC-J4710DW)
Shows the numbers of total pages saved and blank pages skipped on your computer screen.
Saving the scanned image
3
The
(Save) button lets you scan an image to a folder on your hard disk in one of the file types shown
in the file attachment list.
a Configure the settings in the PC Scan setting area.
b Click
(Scan).
c Confirm and edit (if necessary) the scanned image in the image viewer.
d Click
(Save).
e The Save dialog box will appear. Select your Destination Folder and other settings. Click OK.
f The image will be saved in your chosen folder.
Printing the scanned image
3
You can scan a page on the machine and print copies using any of the features of the ControlCenter4
supported Brother machine’s printer driver.
a Select the Scan tab.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter4
b Configure the settings in the PC Scan setting area.
c Click
d Confirm and edit (if necessary) the scanned image in the image viewer.
e Click (Print).
(Scan).
3
f Configure the print settings and then click
(Start Printing).
Opening the scanned image with an application
3
The
(Open with an Application) button lets you scan an image directly into your graphics application
for image editing.
a Select the Scan tab.
b Configure the settings in the PC Scan setting area.
c Click
(Scan).
d Confirm and edit (if necessary) the scanned image in the image viewer.
e Click
(Open with an Application).
f Select the application from the drop-down list and click OK.
g The image will appear in the application you have chosen.
Attaching the scanned data to E-mail
3
The
(Send E-mail) button lets you scan a document to your default E-mail application, so you can send
the scanned job as an attachment.
a Select the Scan tab.
b Configure the settings in the PC Scan setting area.
c Click
d Confirm and edit (if necessary) the scanned image in the image viewer.
e Click (Send E-mail).
(Scan).
69
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter4
f Configure the attached file settings and click OK.
g Your default E-mail application will open and the image will be attached to a new E-mail.
NOTE
The Send E-mail feature does not support Webmail services.
3
Using the OCR feature
3
The
(OCR) button lets you scan a document and convert it into text. This text can be edited using a word
processing application of your choice.
a Select the Scan tab.
b Configure the settings in the PC Scan setting area.
c Click
d Confirm and edit (if necessary) the scanned image in the image viewer.
e Click (OCR).
(Scan).
f Configure the OCR settings and click OK.
g The application you have chosen will open with the converted text data.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter4
PC-FAX tab (For MFC models)
3
This section briefly introduces the PC-FAX tab function. For more details of each function, click
(Help).
NOTE
The PC-FAX software can only send Black & White fax documents.
3
5
1
2
3
6
4
1 Send Image File button
2 Send Scanned Image button
3 View Received PC-FAX button
4 PC Scan setting area
5 Scan Image area
6 Send button
71
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter4
Sending an image file from your computer
3
The Send Image File button lets you send an image file as a fax from the computer using the Brother
PC-FAX software.
a Select the PC-FAX tab.
b Click Send Image File.
3
c Click on the folder tree to browse for the folder where the image you want to send is located. Then select
the file you want to send.
d Click
(Send).
e The PC-FAX sending dialog box will appear. Enter a fax number and then click Start.
Sending a scanned image
3
The Send Scanned Image button lets you scan a page or document and automatically send the image as a
fax from the computer using the Brother PC-FAX software.
a Select the PC-FAX tab.
b Click Send Scanned Image.
c Configure the settings in the PC Scan setting area.
d Click
(Scan).
e Confirm and edit (if necessary) the scanned image in the image viewer.
f Click
(Send).
g The PC-FAX sending dialog box will appear. Enter a fax number and then click Start.
Viewing and printing received PC-FAX data
3
The View Received PC-FAX button lets you view and print received fax data using the Brother PC-FAX
software.
NOTE
Before you use the PC-FAX Receive function, you must select the PC-FAX Receive option from the control
panel menu of the Brother machine. (See Enabling the PC-FAX Receiving software on your machine
a Select the PC-FAX tab.
b Click View Received PC-FAX.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter4
c The PC-FAX receiving function is activated and starts to receive fax data from your machine. The
received data will appear. To view the data, click
(View).
d If you want to print the received data, select the data and then click
(Print).
3
e Configure the print settings and then click
(Start Printing).
73
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter4
Device Settings tab
3
This section briefly introduces the Device Settings tab function. For more details of each function, click
(Help).
3
1
2
3
4
1 Remote Setup button (For MFC models)
2 Address Book button (For MFC models)
3 Device Scan Settings button
4 BRAdmin button
Configuring Remote Setup (For MFC models)
3
The Remote Setup button lets you open the Remote Setup program window to configure most machine and
network setting menus.
a Select the Device Settings tab.
b Click Remote Setup.
Accessing Address Book (For MFC models)
3
The Address Book button lets you open the Address Book window in the Remote Setup program. You can
then easily register or change the Address Book numbers on your machine, from your computer.
a Select the Device Settings tab.
b Click Address Book.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter4
Configuring the Scan button settings
3
The Device Scan Settings button lets you configure your machine’s Scan button settings.
NOTE
You can change the Scan button settings using your Brother machine - however, these changes are only
temporary.
3
If you want to make permanent changes, click Device Scan Settings and configure as required.
There are four scan functions which you can configure to fit your scanning needs.
To configure each scan function, select the Device Settings tab and then click Device Scan Settings. The
Device Scan Settings dialog box will appear.
Image tab
3
Lets you configure settings for Scan to Image by pressing the Scan button on your Brother machine.
Choose the settings for File Type, Target Application, Destination File Path, File size, Resolution,
Scan Type, Document Size, Brightness, Contrast, Auto Crop and Advanced Settings as needed. Click
OK.
If you choose Secure PDF from the File Type drop-down list, click the
(Set PDF Password) button. The
Set PDF Password dialog box will appear. Enter your password in the Password and Re-type Password
box and then click OK.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter4
NOTE
• Secure PDF is also available for Scan to E-mail and Scan to File.
• You can change the data compression ratio of the scanned image with File size.
OCR tab
3
3
Lets you configure settings for Scan to OCR by pressing the Scan button on your Brother machine.
Choose the settings for File Type, Target Application, OCR Language, Destination File Path,
Resolution, Scan Type, Document Size, Brightness, Contrast and Advanced Settings as needed. Click
OK.
E-mail tab
3
Lets you configure settings for Scan to E-mail by pressing the Scan button on your Brother machine.
Choose the settings for File Type, Destination File Path, File size, Resolution, Scan Type,
Document Size, Brightness, Contrast, Auto Crop and Advanced Settings as needed. Click OK.
NOTE
You can change the data compression ratio of the scanned image with File size.
File tab
3
Lets you configure settings for Scan to File by pressing the Scan button on your Brother machine.
Choose the settings for File Type, File Name, Insert Date in File Name, Destination Folder,
Show Folder, File size, Resolution, Scan Type, Document Size, Brightness, Contrast, Auto Crop and
Advanced Settings as needed. Click OK.
NOTE
• If Show Folder is checked, the destination of the scanned image to save will be shown after scanning.
• You can change the data compression ratio of the scanned image with File size.
Launching the BRAdmin utility
3
If you have installed BRAdmin Light or BRAdmin Professional 3, the BRAdmin button lets you open the
BRAdmin Light or BRAdmin Professional 3 utility.
The BRAdmin Light utility is designed for initial setup of the Brother network connected devices. It can also
search for Brother products in a TCP/IP environment, view the status and configure basic network settings,
such as the IP address. For more information, see Network User’s Guide.
If you require more advanced machine management, use the latest version of BRAdmin Professional 3 utility
a Select the Device Settings tab.
b Click BRAdmin. The BRAdmin Light or BRAdmin Professional 3 utility dialog box appears.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter4
NOTE
If you have installed both BRAdmin Light and BRAdmin Professional, ControlCenter4 will launch BRAdmin
Professional 3.
3
77
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter4
Support tab
3
This section briefly introduces the Support tab function. For more details of each function, click
(Help).
Opening ControlCenter Help
3
3
The ControlCenter Help lets you open the Help file for more detailed information about ControlCenter.
a Select the Support tab.
b Click ControlCenter Help.
c The ControlCenter Help main page will appear.
Using the Brother Solutions Center
3
The Brother Solutions Center button lets you open the Brother Solutions Center website offering
information about your Brother product including FAQs (Frequently Asked Questions), User’s Guides, driver
updates and tips for using your machine.
a Select the Support tab.
b Click Brother Solutions Center.
c The Brother Solutions Center website will be shown in your web browser.
Accessing the Brother CreativeCenter
3
The Brother CreativeCenter button lets you access our website for free and easy online solutions for
business and home users.
a Select the Support tab.
b Click Brother CreativeCenter. ControlCenter4 will launch your web browser and then open the Brother
CreativeCenter website.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter4
Using ControlCenter4 in Advanced Mode
3
This section briefly introduces the ControlCenter4 function in Advanced Mode. For more details of each
function, click
(Help).
1
2
3
4
5
6
7
8
9
10
3
11
1 Scan directly to a file, E-mail, word processor or graphics application of your choice.
2 Access the PC-Copy feature available via your computer.
3 Print or edit images, open images on a memory card or USB Flash memory drive, copy files on a memory
card or USB Flash memory drive, and copy files on a memory card or USB Flash memory drive and display
the files with a specific application.
4 Access the PC-FAX applications available for your device.
5 Access the settings available to configure your device.
6 Link to Brother Solutions Center, Brother CreativeCenter or Help.
7 You can configure your original settings tab by right-clicking the tab area.
8 You can select which machine ControlCenter4 will connect to from the Model drop-down list.
9 You can open the configuration window for each scan function and change the user interface mode.
10 Access the Help file.
11 Access the Status Monitor by clicking the device status button.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter4
Scan tab
3
There are four scan options: Image, OCR, E-mail and File.
This section briefly introduces the Scan tab function. For more details of each function, click
(Help).
1
2
3
4
5
3
1 PC Scan setting area
2 Image button
3 OCR button
4 E-mail button
5 File button
81
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter4
File types
3
Document Size
3
You can choose the document size from the Document Size drop-down list. If you choose a 1 to 2 document
size, such as 1 to 2 (A4), the scanned image will be divided into two A5 size documents.
3
Advanced Settings
3
Opening the scanned image with an application
3
The
(Image) button lets you scan an image directly into your graphics application for image editing.
a Select the Scan tab.
b Click
(Image). The Scan Settings dialog box appears.
c You can configure the scan settings in this dialog box. If you want to preview and configure the scanned
image, check PreScan box.
d Click Scan. The image will appear in the application you have chosen.
Using the OCR feature
3
The
(OCR) button lets you scan a document and convert it into text. This text can be edited using a word
processing application of your choice.
a Select the Scan tab.
b Click
(OCR). The Scan Settings dialog box appears.
c You can configure the scan settings in this dialog box. If you want to preview and configure the scanned
image, check PreScan box.
d Click Scan. Your default word processing application will open and display the converted text data.
Attaching the scanned data to E-mail
3
The
(E-mail) button lets you scan a document to your default E-mail application, so you can send the
scanned job as an attachment.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter4
a Select the Scan tab.
b Click
(E-mail). The Scan Settings dialog box appears.
c You can configure the scan settings in this dialog box. If you want to preview and configure the scanned
image, check PreScan box.
3
d Click Scan. Your default E-mail application will open and the image will be attached to a new E-mail.
NOTE
The E-mail feature does not support Webmail services.
Saving the scanned image
3
The
(File) button lets you scan an image to a folder on your hard disk in one of the file types shown in
the file attachment list.
a Select the Scan tab.
b Click
(File). The Scan Settings dialog box appears.
c You can configure the scan settings in this dialog box. If you want to preview and configure the scanned
image, check PreScan box.
d Click Scan. The image will be saved in the folder you have chosen.
How to change the default settings of each button
3
You can change the default settings of the
(Image),
(OCR),
(E-mail) and
(File) buttons.
a Right-click the button that you want to configure and click Button settings. The settings dialog box will
appear.
Contrast, Continuous Scanning, 2-sided Scanning and Auto Crop as needed.
1
(For MFC-J4710DW)
c Click OK. The new settings will be used as the default settings.
NOTE
• To preview and configure the scanned image, check PreScan box in the settings dialog box.
• You cannot use Auto Crop for Scan to OCR.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter4
PC-Copy tab
3
Printing the scanned image
3
You can scan a page on the machine and print copies using any of the features of the ControlCenter4
supported Brother machine’s printer driver.
3
a Select the PC-Copy tab.
b If you want to change the scan settings, right-click the button you want to change and then change the
settings. If you want to preview and configure the scanned image, check PreScan box. Click OK.
c Click Color Copy, Monochrome Copy, 2 in 1 Copy or 4 in 1 Copy.
d The scanned image will be printed.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter4
Photo tab
3
There are four functions: Photo Print, Open PCC Folder, Copy from PCC and Copy to Application. This
section briefly introduces the functions. For more details of each function, click
(Help).
1
2
3
4
3
1 Photo Print button
2 Open PCC Folder button
3 Copy from PCC button
4 Copy to Application button
Printing/Editing images
3
The
(Photo Print) button lets you print or edit images.
Printing images
a Click
3
(Photo Print), then the image viewer appears.
b Choose images you want to print by clicking the image from the image viewer, check the check box
under the image, and then enter the number of copies you want to print (1 to 99).
c Click
(Print), then the Photo Print window appears.
d Configure the settings for Paper Size, Media Type and Layout.
e Click Properties to configure Print Quality, Color / Grayscale and Color Mode if you need to.
(For MFC-J4610DW/J4710DW)
You can also configure the setting for Paper Source.
NOTE
If you want to print the image timestamp in the lower-right corner of the image, check the Print Date check
box.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter4
f Click OK.
g Click
(Start Printing).
Editing images
3
3
a Click
(Photo Print). The image viewer will appear.
b Choose images you want to edit by clicking the image from the image viewer, check the check box under
the image, and then enter the number of copies you want to print (1 to 99).
c Click
d Edit the images with Trimming, Image Correction and Image Enhancement functions.
e Click (Save).
(Edit). The Photo Print window will appear.
Opening PCC folder (PCC: PhotoCapture Center™)
3
®
The
(Open PCC Folder) button starts Windows Explorer and displays files and folders on a memory
card or USB Flash memory drive connected to your Brother machine.
Copying files from PCC folder
3
The
(Copy from PCC) button lets you copy files on a memory card or USB Flash memory drive to your
hard disk. You can configure settings for Destination Folder, Copy Folder and Copy Files from the menu
shown by clicking Configuration.
Copying files to an application
3
The
(Copy to Application) button lets you copy files on a memory card or USB Flash memory drive to
your hard disk and starts a specific application to display the copy destination folder. You can configure
settings for Copy Folder and Copy Files from the menu shown by clicking Configuration.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter4
PC-FAX tab (For MFC models)
3
This section briefly introduces the PC-FAX tab function. For more details of each function, click
(Help).
NOTE
The PC-FAX software can only send Black & White fax documents.
3
Sending an image file from your computer
3
The
(Send Image File) button lets you send an image file as a fax from the PC using the Brother PC-FAX
software.
a Select the PC-FAX tab.
b Click
(Send Image File).
c Click on the folder tree to browse for the folder where the image you want to send is located. Then select
the file you want to send.
d Click
(Send). The PC-FAX sending dialog box will appear.
e Enter a fax number and then click Start.
Sending a scanned image
3
The
(Send Scanned Image) button lets you scan a page or document and automatically send the image
as a fax from the computer using the Brother PC-FAX software.
a Select the PC-FAX tab.
b If you want to change the scan settings, right-click
(Send Scanned Image) and then change the
settings. If you want to preview and configure the scanned image, check PreScan box. Click OK.
c Click
(Send Scanned Image). The PC-FAX sending dialog box will appear.
d Enter a fax number and then click Start.
Viewing and printing received PC-FAX data
3
The
(View Received PC-FAX) button lets you view and print received fax data using the Brother
PC-FAX software.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter4
NOTE
Before you use the PC-FAX Receive function, you must select the PC-FAX Receive option from the control
panel menu of your Brother machine. (See Enabling the PC-FAX Receiving software on your machine
a Select the PC-FAX tab.
3
b Click
(View Received PC-FAX).
c The PC-FAX receiving function activates and starts to receive fax data from your machine. The received
data will appear. To view the data, click (View).
d If you want to print the received data, select the data and then click
(Print).
e Configure the print settings and then click
(Start Printing).
88
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter4
Device Settings tab
3
This section briefly introduces the Device Settings tab function. For more details of each function, click
(Help).
Configuring Remote Setup (For MFC models)
3
3
The
(Remote Setup) button lets you open the Remote Setup program window to configure most
machine and network setting menus.
a Select the Device Settings tab.
b Click
(Remote Setup). The Remote Setup program window will appear.
Accessing Address Book (For MFC models)
3
The
(Address Book) button lets you open the Address Book window in the Remote Setup program.
You can then easily register or change the Address Book numbers from your computer.
a Select the Device Settings tab.
b Click
(Address Book). The Address Book window will appear.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter4
Configuring Scan button settings
3
The
(Device Scan Settings) button lets you configure your machine’s Scan button settings.
NOTE
You can change the Scan button settings using your Brother machine - however, these changes are only
temporary.
3
If you want to make permanent changes, click Device Scan Settings and configure as required.
There are four scan functions which you can configure to fit your scanning needs.
To configure each scan function, select the Device Settings tab and then click Device Scan Settings. The
Device Scan Settings dialog box will appear.
Image tab
3
Lets you configure settings for Scan to Image by pressing the Scan button on your Brother machine.
Choose the settings for File Type, Target Application, Destination File Path, File size, Resolution,
Scan Type, Document Size, Brightness, Contrast, Auto Crop and Advanced Settings as needed. Click
OK.
90
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter4
If you choose Secure PDF from the File Type drop-down list, click the
(Set PDF Password) button. The
Set PDF Password dialog box will appear. Enter your password in the Password and Re-type Password
box and then click OK.
NOTE
• Secure PDF is also available for Scan to E-mail and Scan to File.
3
• You can change the data compression ratio of the scanned image with File size.
OCR tab
3
Lets you configure settings for Scan to OCR by pressing the Scan button on your Brother machine.
Choose the settings for File Type, Target Application, OCR Language, Destination File Path,
Resolution, Scan Type, Document Size, Brightness, Contrast and Advanced Settings as needed. Click
OK.
E-mail tab
3
Lets you configure settings for Scan to E-mail by pressing the Scan button on your Brother machine.
Choose the settings for File Type, Destination File Path, File size, Resolution, Scan Type,
Document Size, Brightness, Contrast, Auto Crop and Advanced Settings as needed. Click OK.
NOTE
You can change the data compression ratio of the scanned image with File size.
File tab
3
Lets you configure settings for Scan to File by pressing the Scan button on your Brother machine.
Choose the settings for File Type, File Name, Insert Date in File Name, Destination Folder,
Show Folder, File size, Resolution, Scan Type, Document Size, Brightness, Contrast, Auto Crop and
Advanced Settings as needed. Click OK.
NOTE
• If Show Folder is checked, the destination of the scanned image to save will be shown after scanning.
• You can change the data compression ratio of the scanned image with File size.
Launching the BRAdmin utility
3
If you have installed BRAdmin Light or BRAdmin Professional 3, the
the BRAdmin Light or BRAdmin Professional 3 utility.
(BRAdmin) button lets you open
The BRAdmin Light utility is designed for initial setup of the Brother network connected devices. It also can
search for Brother products in a TCP/IP environment, view the status and configure basic network settings,
such as IP address. For more information, see Network User’s Guide.
If you require more advanced machine management, use the latest version of BRAdmin Professional 3 that
91
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter4
a Select the Device Settings tab.
b Click
(BRAdmin). The BRAdmin Light or BRAdmin Professional 3 utility dialog box appears.
NOTE
If you have installed both BRAdmin Light and BRAdmin Professional, ControlCenter4 will launch BRAdmin
Professional 3.
3
92
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter4
Support tab
3
This section briefly introduces the Support tab function. For more details of each function, click
(Help).
Opening ControlCenter Help
3
3
The
(ControlCenter Help) button lets you open the Help file for detailed information about
ControlCenter.
a Select the Support tab.
b Click
(ControlCenter Help).
c The ControlCenter Help top page will appear.
Using the Brother Solutions Center
3
The
(Brother Solutions Center) button lets you open the Brother Solutions Center website offering
information about your Brother product including FAQ’s (Frequently Asked Questions), User’s Guides, driver
updates and tips for using your machine.
a Select the Support tab.
b Click
(Brother Solutions Center).
c The Brother Solutions Center website will be shown in your web browser.
Accessing the Brother CreativeCenter
3
The
(Brother CreativeCenter) button lets you access our website for free and easy online solutions for
business and home uses.
a Select the Support tab.
b Click
(Brother CreativeCenter). ControlCenter4 will launch your web browser and then open the
Brother CreativeCenter website.
93
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter4
Custom tab
3
This section briefly introduces adding Custom tabs. For more details, click
(Help).
Creating a Custom tab
3
3
You can create up to three customized tabs including up to five customized buttons with your preferred
settings.
a Click Configuration and then select Create custom tab.
Creating a Custom button
3
a Click Configuration and then select Create custom button. Select a button you want to create from
the menu. The settings dialog box will appear.
b Enter the button name and change the settings if necessary. Click OK.
(The setting options vary depending on the created button.)
94
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter4
3
NOTE
You can change or remove the created tab, button or settings. Click Configuration and follow the menu.
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Setup (For MFC models)
4
4
Remote Setup
4
®
The Remote Setup program lets you configure many machine settings from a Windows application. When
you start this application, the settings on your machine will be downloaded automatically to your computer
and displayed on your screen. If you change the settings, you can upload them directly to the machine.
Click the
button, All Programs, Brother, MFC-XXXX, and Remote Setup.
4
OK
Lets you start uploading data to the machine and exit the Remote Setup program. If an error message is
displayed, enter the correct data again and then click OK.
Cancel
Lets you exit the Remote Setup program without uploading data to the machine.
Apply
Lets you upload data to the machine without exiting the Remote Setup program.
Print
Lets you print the chosen items on the machine. You cannot print the data until it is uploaded to the
machine. Click Apply to upload the new data to the machine and then click Print.
Export
Lets you save the current configuration settings to a file.
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Setup (For MFC models)
Import
Lets you read the settings from a file.
NOTE
• You can use the Export button to save all your settings for your machine.
• If your computer is protected by a firewall, and is unable to use Remote Setup, you may need to configure
the firewall settings to allow communication through port number 137. For more information, see Firewall
®
• If you are using Windows Firewall and you installed MFL-Pro Suite from the CD-ROM, the necessary
4
Firewall settings have already been made.
97
Download from Www.Somanuals.com. All Manuals Search And Download.
Brother PC-FAX Software
(For MFC models)
5
5
PC-FAX sending
5
The Brother PC-FAX feature lets you use your computer to send a document file from an application as a
standard fax. You can send a file created in any application on your computer as a PC-FAX. You can even
attach a cover page. All you have to do is set up the receiving parties as members or groups in your PC-FAX
Address Book or simply enter the destination address or fax number into the user interface. You can use the
Address Book Search feature to quickly find members to send to.
For the latest information and updates on the Brother PC-FAX feature, visit the main page for your model on
the Brother Solutions Center (http://solutions.brother.com/). To update the PC-FAX software, go to the
Downloads page, download the Full Driver & Software Package for your OS and language, and then install
the package. If you have questions or problems, go to the FAQ’s & Troubleshooting page.
5
NOTE
The PC-FAX software can only send Black & White fax documents.
Sending a file as a PC-FAX
5
a Create a file in any application on your PC.
b Click File, then Print.
The Print dialog box appears:
98
Download from Www.Somanuals.com. All Manuals Search And Download.
Brother PC-FAX Software (For MFC models)
c Choose Brother PC-FAX as your printer, and then click Print. The PC-FAX sending dialog box appears:
5
d Enter a fax number using any of the following methods:
Use the dial pad to enter the number.
NOTE
If you check the Dial Restriction check box, a confirmation dialog box will appear for you to re-enter the
fax number using the dial pad. This feature helps to prevent transmissions to the wrong destination.
Click the Address Book button, and then choose a member or group from the Address Book.
If you make a mistake, click All Clear to delete all the entries.
e To include a cover page, click Add Cover Page.
NOTE
You can also click the cover page
icon to create or edit a cover page.
f Click Start to send the fax.
NOTE
• If you want to cancel the fax, click Cancel.
• If you want to redial a number, click Redial to scroll through the last five fax numbers, choose a number,
and then click Start.
Setting up user information
NOTE
5
You can access User Information from the FAX Sending dialog box by clicking the
icon. (See
a Click the
PC-FAX Sending, then PC-FAX Setup.
The Brother PC-FAX Setup dialog box appears:
button, All Programs, Brother, MFC-XXXX (where XXXX is your model name),
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Brother PC-FAX Software (For MFC models)
5
b Enter this information to create the fax header and cover page.
c Click OK to save the User Information.
NOTE
®
You can set up the User Information separately for each Windows account.
Sending setup
5
From the Brother PC-FAX Setup dialog box, choose the Sending tab to display the screen below.
Outside line access
Enter the characters (including numbers and !, #, *, - and +) used to access an outside line here. This is
sometimes required by office telephone systems (for example, dialing #09 to get an outside line in your
office).
Include header
To add the header information you entered in the User Information tab to the top of your sent faxes, check
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Brother PC-FAX Software (For MFC models)
Setting up a cover page
5
From the PC-FAX dialog box, click the
icon to access the Brother PC-FAX Cover Page Setup screen.
The Brother PC-FAX Cover Page Setup dialog box appears:
5
Entering cover page information
5
NOTE
If you are sending a fax to more than one recipient, the recipient information will not be printed on the cover
page.
To
Choose the recipient information you want to add to the cover page.
From
Choose the sender information you want to add to the cover page.
Comment
Enter the comment you want to add to the cover page.
Form
Choose the cover page format you want to use.
Cover page title
If you choose Custom, you can put a bitmap file, such as your company logo, on the cover page.
Click Browse to choose the BMP file, and then choose the alignment style.
Count cover page
When Count cover page is checked, the cover page will be included in the page numbering. When
Count cover page is unchecked, the cover page will not be included.
101
Download from Www.Somanuals.com. All Manuals Search And Download.
Brother PC-FAX Software (For MFC models)
Address Book
5
If Outlook, Outlook Express or Windows Mail is installed on your computer, you can choose in the
Select Address Book drop-down list which address book to use for PC-FAX sending. There are five types:
Brother Address Book, Outlook, Outlook Express, Windows Mail Address or Windows Contacts.
For the address book file, you must enter the path and file name of the database file which contains the
address book information.
Click Browse to choose the database file.
5
You can use the address book chosen from the Select Address Book drop-down list by clicking the
Address Book button in the FAX Sending dialog box.
When Windows Contacts was chosen
5
NOTE
®
®
• To use your Outlook Address Book, you must select Microsoft Outlook 2002, 2003, 2007 or 2010 as
your default E-mail application.
®
®
• For Microsoft Outlook 2010, the 64-bit version is not supported.
102
Download from Www.Somanuals.com. All Manuals Search And Download.
Brother PC-FAX Software (For MFC models)
Brother Address Book
5
a Click the
button, All Programs, Brother, MFC-XXXX (where XXXX is your model name),
PC-FAX Sending, then PC-FAX Address Book.
The Address Book dialog box appears:
5
Setting up a member in the Address Book
5
In the Address Book dialog box you can add, edit and delete members and groups.
a In the Address Book dialog box, click the
icon to add a member.
The Address Book Member Setup dialog box appears:
b In the Member Setup dialog box, enter the member’s information. Name is a required field. Click OK to
save the information.
103
Download from Www.Somanuals.com. All Manuals Search And Download.
Brother PC-FAX Software (For MFC models)
Setting up a group for broadcasting
5
You can create a group to send the same PC-FAX to several recipients at one time.
a In the Address Book dialog box, click the
icon to create a Group.
The Address Book Group Setup dialog box appears:
5
b Enter the name of the new group in the Group Name field.
c In the Available Names box, choose each member to be included in the group, and then click Add >>.
Members added to the group appear in the Group Members box.
d After all the members you want have been added, click OK.
NOTE
You can have up to 50 members in a group.
Editing member information
5
a Choose the member or group you want to edit.
b Click the edit
icon.
c Change the member or group information.
d Click OK.
Deleting a member or group
5
a Choose the member or group you want to delete.
104
Download from Www.Somanuals.com. All Manuals Search And Download.
Brother PC-FAX Software (For MFC models)
b Click the delete
icon.
c When the confirmation dialog box appears, click OK.
Exporting the Address Book
5
You can export the whole Address Book to an ASCII text file (*.csv). You can also create a vCard for an
address book member that can be attached to an outgoing E-mail (a vCard is an electronic business card
that contains the sender’s contact information). You can also export the Address Book as Remote Setup Dial
Data that can be used by the Remote Setup program of your machine. (See Remote Setup (For MFC models)
on page 96.) If you are creating a vCard, you must first click on the address book member you want to create
the vCard for.
5
Exporting the current Address Book
5
NOTE
If you are creating a vCard, you must first choose the member.
a Do one of the following:
From the Address Book, click File, Export, then Text.
b From the Available Items column, choose the data fields you want to export and then click Add >>.
NOTE
Choose the items in the order you want them listed.
c If you are exporting to an ASCII file, choose Tab or Comma from Divide Character. This chooses Tab
or Comma to separate the data fields.
105
Download from Www.Somanuals.com. All Manuals Search And Download.
Brother PC-FAX Software (For MFC models)
d Click OK to save the data.
5
e Enter the file name, and then click Save.
Importing to the Address Book
5
You can import ASCII text files (*.csv), vCards (electronic business cards) or Remote Setup Dial Data into
your Address Book.
a Do one of the following:
From the Address Book, click File, Import, then Text.
106
Download from Www.Somanuals.com. All Manuals Search And Download.
Brother PC-FAX Software (For MFC models)
b From the Available Items column choose the data fields you want to import, and click Add >>.
NOTE
From the Available Items list choose the fields in the same order they are listed in the import text file.
c Choose Tab or Comma based on the file format you are importing from Divide Character.
d Click OK to import the data.
e Enter the file name, and then click Open.
5
NOTE
107
Download from Www.Somanuals.com. All Manuals Search And Download.
Brother PC-FAX Software (For MFC models)
PC-FAX receiving
5
The Brother PC-FAX Receive software lets you view and store faxes on your computer. It is automatically
installed when you install the MFL-Pro Suite and works on locally or network connected machines.
When enabled, your machine will receive faxes in its memory. Once it has received the fax, it will
automatically be sent to your computer.
If you turn your computer off, your machine will continue to receive and store your faxes in its memory. The
machine's Touch Panel will display the number of stored faxes received.
When you switch your computer on, the PC-FAX Receive software automatically transfers your faxes to your
computer.
To enable the PC-FAX Receive software, do the following:
5
Before you use the PC-FAX Receive function, you must choose PC-FAX Receive from the menu on
the machine.
Run the Brother PC-FAX Receive software on your computer. (We recommend you select the Add to
Startup folder check box, so that the software automatically runs and can transfer any faxes on computer
startup.)
NOTE
• Refer to the guide and the website noted below for more information.
See Basic User’s Guide: Troubleshooting.
• To use PC-FAX receiving with a computer that is protected by a firewall, the Network PC-FAX receiving
®
program must be excluded from the firewall setting. If you are using Windows Firewall and you installed
MFL-Pro Suite from the CD-ROM, the necessary Firewall settings have already been made. For more
108
Download from Www.Somanuals.com. All Manuals Search And Download.
Brother PC-FAX Software (For MFC models)
• (For MFC-J4710DW)
If you receive a fax containing multiple paper sizes (for example, a page of Letter/A4 data and a page of
Ledger/A3 data), the machine creates a new file each time it receives a different paper size. When your
computer is turned off, the machine stores the files in its memory. The LCD will show that more than one
fax job has been received.
Enabling the PC-FAX Receiving software on your machine
5
You can optionally enable the Backup Print option. When enabled, the machine will print a copy of the fax
before the fax is sent to the computer or if the computer is switched off.
5
(For MFC-J4510DW/J4710DW)
5
a Press
.
b Press All Settings.
c Press Fax.
d Press Setup Receive.
e Swipe up or down, or press a or b to display Memory Receive.
Press Memory Receive.
f Swipe up or down, or press a or b to display PC Fax Receive.
Press PC Fax Receive.
Press OK.
g Swipe up or down, or press a or b to choose <USB> or your computer name if connected to a network.
Press OK.
h Press Backup Print:On or Backup Print:Off.
i Press
.
NOTE
If you select Backup Print:On, the machine will print the fax, so you will have a copy if there is a power
failure before it is sent to the computer. The fax messages are automatically erased from your machine’s
memory when they have been successfully printed and sent to your computer. When you select
Backup Print:Off your fax messages are automatically erased from your machine’s memory when
they have been successfully sent to your computer.
(For MFC-J4310DW/J4410DW/J4610DW)
5
a Press Settings.
b Press s or t to display Fax.
Press Fax.
109
Download from Www.Somanuals.com. All Manuals Search And Download.
Brother PC-FAX Software (For MFC models)
c Press s or t to display Setup Receive.
Press Setup Receive.
d Press s or t to display Memory Receive.
Press Memory Receive.
e Press s or t to display PC Fax Receive.
Press PC Fax Receive.
Press OK.
f Press s or t to choose <USB> or your computer name if connected to a network.
g Press Backup Print:On or Backup Print:Off.
5
h Press
.
NOTE
If you select Backup Print:On, the machine will print the fax, so you will have a copy if there is a power
failure before it is sent to the computer. The fax messages are automatically erased from your machine’s
memory when they have been successfully printed and sent to your computer. When you select
Backup Print:Off your fax messages are automatically erased from your machine’s memory when
they have been successfully sent to your computer.
Running the PC-FAX Receiving software on your computer
5
Click the
button, All Programs, Brother, MFC-XXXX, PC-FAX Receiving and Receive.
The PC-Fax Receiving dialog box appears. Confirm the message and click OK.
The PC-FAX icon appears in your computer’s tasktray.
Setting up your computer
5
a Right-click the PC-FAX
icon on your computer’s tasktray, and then click PC-Fax Rx Setup.
The PC-Fax Rx Setup dialog box appears:
110
Download from Www.Somanuals.com. All Manuals Search And Download.
Brother PC-FAX Software (For MFC models)
5
b In Save file to, click Browse if you want to change the path where PC-FAX files are saved.
c In File Format, choose .tif or .pdf as the received document format. The default format is .tif.
d To play wave files (.wav sound files) when receiving a fax, check Play wave file when receiving FAX,
and enter the path of the wave file.
®
e To automatically start the PC-FAX receiving software when you start Windows , check
Add to Startup folder.
111
Download from Www.Somanuals.com. All Manuals Search And Download.
Brother PC-FAX Software (For MFC models)
Configuring the Network PC-FAX Receiving Settings
5
The settings to send received faxes to your computer were automatically configured during the installation of
MFL-Pro Suite. See Quick Setup Guide.
If you are using a different machine than the one that was registered to your computer during the installation
of the MFL-Pro Suite software, follow the steps below.
a In the PC-Fax Rx Setup dialog box, click Network Settings. The Network Settings dialog box
appears.
b You must specify the IP address or node name of your machine.
Choose the appropriate connection method.
5
Specify your machine by address
Enter the IP address of the machine in IP Address.
Specify your machine by name
Enter the machine’s node name in Node Name, or click Browse and choose the correct Brother
machine you want to use from the list.
Display Your PC Name
112
Download from Www.Somanuals.com. All Manuals Search And Download.
Brother PC-FAX Software (For MFC models)
You can specify the computer name that will appear on the display of the machine. To change the name,
enter the new name in Display Your PC Name.
Viewing new PC-FAX messages
5
Each time your computer is receiving a PC-FAX, the icon will alternate between
and
. Once the fax
has been received, the icon will change to
has been viewed.
. The
icon will change to
once the received fax
5
a Double-click
to run Nuance™ PaperPort™ 12SE.
b Open the Fax Received folder.
c Double-click any new faxes to open and view them.
NOTE
The name of your unread computer message will be based on the date and time that the messages were
received until you assign a file name. For example ‘Fax 2-20-2012 16:40:21.tif’.
113
Download from Www.Somanuals.com. All Manuals Search And Download.
PhotoCapture Center™
6
6
IMPORTANT
DO NOT start your computer with a memory card or USB Flash memory drive installed in the media drive
of the machine. You could lose your data or damage the media.
NOTE
• The PhotoCapture Center™ will read only the media that was put in first.
• While the machine is printing from the PhotoCapture Center™, your computer cannot access the
PhotoCapture Center™ for any other operation.
Using PhotoCapture Center™
6
6
a Open the media slot cover.
b Put a memory card or USB Flash memory drive into your machine.
®
c In Windows Explorer, double-click the Removable Disk icon . The files and folders on the memory
card or USB Flash memory drive will appear on your screen.
You can edit a file and save it to another drive on your computer.
1
If you are using Windows® XP/Windows Vista®/ Windows® 7 and you create a name for the volume label of the memory card or USB Flash
memory drive, this name appears instead of Removable Disk.
When you take out a memory card or USB Flash memory drive, do the following to prevent damage
to the memory card or USB Flash memory drive:
6
®
a In Windows Explorer, right-click the removable disk icon and choose Eject.
b Wait until the LCD message disappears before taking out the media.
IMPORTANT
DO NOT remove the memory card or USB Flash memory drive while the LCD is displaying a message.
Otherwise, the card, USB Flash memory drive or data stored on the card could be damaged.
If you remove the memory card or USB Flash memory drive while the LCD is displaying the message, you
must restart your computer once before inserting the same memory card or USB Flash memory drive into
the machine. If you do not restart your computer, the data on your media could be destroyed.
114
Download from Www.Somanuals.com. All Manuals Search And Download.
PhotoCapture Center™
For Network Users
6
a Open the media slot cover.
b Put a memory card or USB Flash memory drive into your machine.
c Start a web browser which supports the FTP protocol. Your browser software accesses the media using
the FTP protocol and the network Host Name of the machine. You can also access the media by entering
ftp://XXX.XXX.XXX.XXX (where XXX.XXX.XXX.XXX is the IP address of your Brother machine) from
your web browser.
d Click the name of the file you want to see.
NOTE
Using certain characters or symbols in a file name on the memory card or USB Flash memory drive may
cause a problem accessing the file. We recommend to only use combinations of the following characters
in a file name.
6
When you take out a memory card or USB Flash memory drive, do the following to prevent damage
to the memory card or USB Flash memory drive:
6
a Close the browser.
b Wait until the LCD message disappears before taking out the memory card or USB Flash memory drive.
IMPORTANT
DO NOT remove the memory card or USB Flash memory drive while the LCD is displaying a message.
Otherwise, the card, USB Flash memory drive or data stored on the card could be damaged.
If you remove the memory card or USB Flash memory drive while the LCD is displaying the message, you
must restart your computer once before inserting the same memory card or USB Flash memory drive into
the machine. If you do not restart your computer, the data on your media could be destroyed.
115
Download from Www.Somanuals.com. All Manuals Search And Download.
Firewall settings (For Network users)
7
7
Before using the Brother software
7
Firewall settings on your computer may reject the necessary network connection for network printing, network
®
scanning and PC-Fax. If you are using Windows Firewall and you installed MFL-Pro Suite from the
CD-ROM, the necessary Firewall settings have already been made. If you did not install from the CD-ROM
®
follow the instructions below to configure Windows Firewall. If you are using any other personal firewall
software, see the user’s guide for your software or contact the software manufacturer.
UDP Port number information for Firewall configuration
UDP Port
Network Scanning
Network PC-Fax
Network Scanning and
Network PC-Fax
External Port number
Internal Port number
54925
54925
54926
54926
137
137
7
1
Add Port number 137 if you still have trouble with your network connection after you added port 54925 and 54926. Port number 137 also supports
printing, PhotoCapture Center™ and Remote Setup over the network.
Windows® XP SP2 or higher users
7
a Click Start, Control Panel, Network and Internet Connections and then Windows Firewall.
Make sure that Windows Firewall on the General tab is set to On.
b Choose the Advanced tab and click Settings.
c Click Add.
d Add port 54925 for network scanning by entering the information below:
1 In Description of service: Enter any description, for example “Brother Scanner”.
116
Download from Www.Somanuals.com. All Manuals Search And Download.
Firewall settings (For Network users)
2 In
Name or IP address (for example 192.168.0.12) of the computer hosting this service on your
network: Enter “Localhost”.
3 In External Port number for this service: Enter “54925”.
4 In Internal Port number for this service: Enter “54925”.
5 Make sure UDP is selected.
6 Click OK.
1
2
5
3
7
4
e Click Add.
f Add port 54926 for Network PC-Fax by entering the information below:
1 In Description of service: Enter any description, for example “Brother PC-Fax”.
2 In
Name or IP address (for example 192.168.0.12) of the computer hosting this service on your
network: Enter “Localhost”.
3 In External Port number for this service: Enter “54926”.
4 In Internal Port number for this service: Enter “54926”.
5 Make sure UDP is selected.
6 Click OK.
g If you still have trouble with your network connection, click Add.
h Add port 137 for both network scanning and Network PC-Fax receiving by entering the information
below:
1 In Description of service: Enter any description, for example “Brother Network Print”.
2 In
Name or IP address (for example 192.168.0.12) of the computer hosting this service on your
network: Enter “Localhost”.
3 In External Port number for this service: Enter “137”.
4 In Internal Port number for this service: Enter “137”.
117
Download from Www.Somanuals.com. All Manuals Search And Download.
Firewall settings (For Network users)
5 Make sure UDP is selected.
6 Click OK.
i Make sure that the new setting is added and is checked, and then click OK.
Windows Vista® users
7
a Click the
button, Control Panel, Network and Internet, Windows Firewall and click
Change settings.
b When the User Account Control screen appears, do the following:
Users who have administrator rights: Click Continue.
7
For users who do not have administrator rights: Enter the administrator password and click OK.
c Make sure that Windows Firewall on the General tab is set to On.
118
Download from Www.Somanuals.com. All Manuals Search And Download.
Firewall settings (For Network users)
d Choose the Exceptions tab.
7
e Click Add port.
f To add port 54925 for network scanning, enter the information below:
1 In Name: Enter any description, for example “Brother Scanner”.
2 In Port number: Enter “54925”.
3 Make sure UDP is selected.
Then, click OK.
1
2
3
g Click Add port.
h To add port 54926 for Network PC-Fax, enter the information below:
1 In Name: Enter any description, for example “Brother PC-Fax”.
2 In Port number: Enter “54926”.
3 Make sure UDP is selected.
Then, click OK.
i Make sure that the new setting is added and is checked, and then click OK.
119
Download from Www.Somanuals.com. All Manuals Search And Download.
Firewall settings (For Network users)
j If you still have trouble with your network connection such as Network Scanning or Printing, check the
File and Printer Sharing box in the Exceptions tab and then click OK.
7
Windows® 7 users
7
a Click the
button, Control Panel, System and Security and then Windows Firewall.
Make sure the Windows Firewall state is set to On.
b Click Advanced settings. The Windows Firewall with Advanced Security window appears.
c Click Inbound Rules.
120
Download from Www.Somanuals.com. All Manuals Search And Download.
Firewall settings (For Network users)
d Click New Rule.
7
e Choose Port and click Next.
f To add port enter the information below:
For network scanning
Choose UDP and enter “54925” in the Specific local ports.
Click Next.
For Network PC-Fax
Choose UDP and enter “54926” in the Specific local ports.
Click Next.
121
Download from Www.Somanuals.com. All Manuals Search And Download.
Firewall settings (For Network users)
g Choose Allow the connection and click Next.
h Check the applicable items and click Next.
i Enter any description in Name: (for example “Brother Scanner” or “Brother PC-Fax”) and click Finish.
7
j Make sure that the new setting is added and is checked.
k Click Outbound Rules.
122
Download from Www.Somanuals.com. All Manuals Search And Download.
Firewall settings (For Network users)
l Click New Rule.
7
m Choose Port and click Next.
n To add port enter the information below:
For network scanning
Choose UDP and enter “54925” in the Specific remote ports.
Click Next.
For Network PC-Fax
Choose UDP and enter “54926” in the Specific remote ports.
Click Next.
123
Download from Www.Somanuals.com. All Manuals Search And Download.
Firewall settings (For Network users)
7
o Choose Allow the connection and click Next.
p Check the applicable items and click Next.
q Enter any description in Name: (for example “Brother Scanner” or “Brother PC-Fax”) and click Finish.
r Make sure that the new setting is added and is checked.
124
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing and Faxing
8
8
Setting up your computer
8
NOTE
The screens shown in this section are mainly from Mac OS X v10.7.x. Screens on your computer may
vary depending on your operating system and application.
Choosing the right type of paper
8
For high quality printing, it is important to choose the right type of paper. Be sure to read Loading paper and
Loading documents in the Basic User’s Guide before buying paper, and to determine the printable area
depending on the settings in the printer driver.
Simultaneous printing, scanning and faxing
8
Your machine can print from your computer while sending or receiving a fax in memory, or while scanning a
document into the computer. Fax sending will not stop during computer printing.
8
However, when the machine is copying or receiving a fax on paper, it pauses the computer printing operation,
and then continues printing when copying or fax receiving has finished.
Clearing data from the memory
8
If the LCD shows Data Remaining in Memory, you can clear the data that is left in the printer memory
by pressing
on the control panel.
126
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing and Faxing
Status Monitor
8
The Status Monitor utility is a configurable software tool for monitoring the status of the machine. It allows you
to see error messages such as paper empty, paper jam or ink replacement. Before you can use the tool you
must choose your machine in the Model pop-up menu in ControlCenter2.
You can check the device status by launching Brother Status Monitor.
(Mac OS X v10.5.8)
a Run the System Preferences, select Print & Fax, then choose the machine.
b Click Open Print Queue, then click Utility. The Status Monitor will start up.
(Mac OS X v10.6.x)
a Run the System Preferences, select Print & Fax, then choose the machine.
b Click Open Print Queue, then click Printer Setup. Select the Utility tab then click Open Printer Utility.
The Status Monitor will start up.
(Mac OS X v10.7.x)
a Run the System Preferences, select Print & Scan, then choose the machine.
8
b Click Open Print Queue, then click Printer Setup. Select the Utility tab then click Open Printer Utility.
The Status Monitor will start up.
You can also check the device status by clicking the Ink Level icon in the DEVICE SETTINGS tab of
ControlCenter2.
Updating the machine’s status
If you want the latest machine status while the Status Monitor window is open, click the update button (1).
1
127
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing and Faxing
Error Messages
The ink level is low.
The ink cartridge is empty.
There is a problem with the ink cartridge.
You can set at what interval the software will update the machine status information. Go to the menu bar,
Brother Status Monitor and choose Preferences.
Hiding or showing the window
After starting the Status Monitor, you can hide or show the window. To hide the window, go to the menu
bar, Brother Status Monitor and choose Hide Status Monitor. To show the window, click the
Brother Status Monitor icon in the dock or click the Ink Level button in the DEVICE SETTINGS tab of
ControlCenter2.
8
Quitting the window
Click the Brother Status Monitor in the menu bar and then choose Quit Status Monitor from the pop-up
menu.
Web Based Management (Network Connection only)
You can access the Web Based Management System by clicking the machine icon on the Status Monitor
screen. A standard Web Browser can be used to manage your machine using HTTP (Hyper Text Transfer
Protocol). Refer to the guide noted below more information on the Web Based Management System.
See Network User’s Guide: Web Based Management.
Retrieve Printer’s Color Data
This setting helps to optimize print quality by retrieving color data from your specific device. Use this option
when you have replaced the device or changed the network connected device. To configure the setting,
go to the menu bar, choose Control and then Retrieve Printer’s Color Data.
NOTE
• When an error message dialog box appears, confirm that your computer and your Brother machine are
correctly connected, and then retry.
• After retrieving the printer’s color data, your computer will save the data and apply it to printing.
• If your Brother machine is connected to multiple computers, do this feature on each computer connected.
• You can retrieve the printer’s color data only from the printer server if the printer is shared.
128
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing and Faxing
Using the Brother printer driver
8
Choosing page setup options
8
a From an application such as Apple TextEdit, click File, then Page Setup. Make sure
Brother MFC-XXXX (where XXXX is your model name) is chosen in the Format For pop-up menu. You
can change the settings for Paper Size, Orientation and Scale, then click OK.
8
NOTE
• The printer driver does not support Watermark printing.
• You can print using Legal, Ledger and A3 paper only from the manual feed slot.
• When you are feeding Legal, Ledger or A3 size paper in the manual feed slot, the machine holds the
printed page after printing so that the page does not fall. Once printing is complete, pull out the printed
page and press OK.
• (For MFC-J4710DW)
You can also print using Legal, Ledger and A3 paper from Tray2.
• The paper orientation (portrait or landscape) varies depending on the paper size. See Basic User’s Guide.
b From an application such as Apple TextEdit, click File, then click Print to start printing. You can choose
a preset from the Presets pop-up menu to select a previously configured set of print settings.
(Mac OS X v10.5.8 to 10.6.x)
For more page setup options, click the disclosure triangle beside the Printer pop-up menu.
129
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing and Faxing
NOTE
You can save the current settings as a preset by choosing Save As from the Presets pop-up menu.
8
(Mac OS X v10.7.x)
For more page setup options, click Show Details.
130
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing and Faxing
NOTE
You can save the current settings as a preset by choosing Save Current Settings as Preset from the
Presets pop-up menu.
8
To do borderless printing
8
From the Paper Size pop-up menu, choose the size of paper you want to print such as US Letter Borderless
or Tabloid Borderless.
131
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing and Faxing
2-sided Printing
8
a Select Layout.
b Choose Long-Edge binding or Short-Edge binding in Two-Sided.
8
NOTE
• The Borderless feature is not available for 2-sided printing.
• You cannot use Legal, Ledger or A3 paper for 2-sided printing.
132
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing and Faxing
Print Settings
8
You can choose the Media Type, Slow Drying Paper, Print Quality and Color/Grayscale settings.
(For MFC-J4610DW/J4710DW)
You can also choose the Paper Source setting.
NOTE
8
Check Slow Drying Paper when printing with plain paper on which ink dries slowly. This setting may
cause some slight blurring of text.
Media Type
8
To achieve the best print results, the media being printed on should be selected in the driver. The machine
changes the way it prints depending on the selected media type.
Plain Paper
Inkjet Paper
Brother BP71 Photo Paper
Brother BP60 Matte Paper
Other Photo Paper
Transparencies
134
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing and Faxing
Print Quality
8
The quality selection lets you choose the print resolution you want for your document. Print quality and speed
are related. The higher the quality, the longer it will take to print the document. The quality selections that are
available will vary depending on the media type you choose.
Fast
The fastest print mode and the lowest amount of ink used. Use for printing large volume documents or
documents for proofing.
Normal
Good print quality with typical print speed.
Photo
Use for printing photographs. Since the print data is much larger than a normal document, the processing
time, data transfer time and print time will be longer.
Best
Use for printing precise images such as photographs. This is the best resolution and slowest speed.
Media Type
Color/Grayscale
Print Quality Selection
8
Color/Grayscale
Fast, Normal, Best
Plain Paper
Inkjet Paper or
Brother BP60 Matte Paper
Color/Grayscale
Color/Grayscale
Color/Grayscale
Normal, Photo
Fast, Photo, Best
Normal
Brother BP71 Photo Paper or
Other Photo Paper
Transparencies
1
If you choose Tabloid Borderless as the Paper Size, you can choose Normal or Best.
NOTE
The default settings are shown in bold.
Color/Grayscale
8
This function can be used to print color documents in black and white using grayscale.
Paper Source (For MFC-J4610DW/J4710DW)
8
You can choose Auto Select, Tray1 or Tray2 as Paper Source. If you put one sheet of paper in the manual
feed slot, the paper from the slot is automatically chosen. Make sure that you do not put any paper in the slot
when printing on paper from Tray1 or Tray2.
NOTE
• You can print using Legal, Ledger and A3 paper only from the manual feed slot.
135
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing and Faxing
• When you are feeding Legal, Ledger or A3 size paper in the manual feed slot, the machine holds the
printed page after printing so that the page does not fall. Once printing is complete, pull out the printed
page and press OK.
• (For MFC-J4710DW)
You can also print using Legal, Ledger and A3 paper from Tray2.
Layout
8
To choose Reverse Page Orientation or Flip horizontally, select Layout.
8
Reverse Page Orientation
Check Reverse Page Orientation to reverse the data from up to down.
Flip horizontally
Check Flip horizontally to reverse the data from left to right.
NOTE
(For Mac OS X v10.5.8 users)
• Flip horizontally is shown as Mirror Print in the Advanced menu.
136
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing and Faxing
• Mirror Print is not available when choosing Transparencies as the Media Type.
Advanced settings
8
Click Advanced to configure Change Data Transfer Mode, Advanced 2-sided Settings and
Other Print Options settings.
8
Change Data Transfer Mode
8
The Change Data Transfer Mode feature lets you choose print data transfer mode to improve print quality
or print speed.
Recommended Setting
Choose Recommended Setting for general use.
Improved Print Quality
Choose Improved Print Quality for better print quality. Print speed may be reduced slightly, depending
on the print data.
137
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing and Faxing
Improved Print Speed
Choose Improved Print Speed for faster print speed.
Advanced 2-sided Settings
8
Some types of print media may need more drying time when using the 2-sided feature. Change
Advanced 2-sided Settings if you have problems with smudged 2-sided prints or paper jams.
Normal
Choose Normal to print at a typical speed, using a normal amount of ink.
2-sided 1 (Slower print speed)
Choose 2-sided 1 to print at a slower speed, using a normal amount of ink.
2-sided 2 (Slower print speed & less ink)
Choose 2-sided 2 to print the same speed as using 2-sided 1, but using less ink.
Other Print Options
8
You can choose the Paper Thickness and Bi-Directional Printing settings.
Paper Thickness
8
You can choose Paper Thickness from Regular, Thick and Envelope.
Bi-Directional Printing
When Bi-Directional Printing is checked, the print head prints in both directions offering faster print
speeds. When unchecked, the print head will only print in one direction giving higher quality printouts, but
slower printing speeds.
138
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing and Faxing
Color Settings
8
Color is adjusted to get the closest color match with the monitor.
Natural: Use for photographic images. The color is adjusted to print more natural colors.
Vivid: Use for business graphics such as charts, graphics and text. The color is adjusted to print more vivid
colors.
None
ColorSync: This option is shown and used automatically when choosing ColorSync in Color Matching.
8
Advanced Color Settings
8
Click Advanced Color Settings to configure the Color Enhancement and Halftone Pattern settings.
Color Enhancement
8
Brightness
Adjusts the brightness of the whole image. To lighten or darken the image, move the slider to the right or
left.
139
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing and Faxing
Contrast
Adjusts the contrast of an image. Increase the contrast when you want an image to be clearer. Decrease
the contrast when you want an image to be more subdued.
Red
Increases the intensity of Red in the image.
Green
Increases the intensity of Green in the image.
Blue
Increases the intensity of Blue in the image.
Halftone Pattern
8
The machine can use two methods (Diffusion or Dither) to arrange dots to express halftones. There are
some predefined patterns and you can choose which one to use for your document.
Diffusion
Dots are put at random to create the halftones. Use for printing photographs that have delicate shades and
graphics.
8
Dither
Dots are arranged in a pre-defined pattern to make halftones. Use for printing graphics that have definite
color boundaries or for printing charts such as business charts.
140
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing and Faxing
Sending a fax (For MFC models)
8
You can send a fax directly from an application.
a Create a document in an application.
b From an application such as Apple TextEdit, click File, then Print.
(Mac OS X v10.5.8 to 10.6.x)
Click the disclosure triangle beside the Printer pop-up menu.
8
(For Mac OS X v10.7.x)
For more page setup options, click Show Details.
141
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing and Faxing
8
142
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing and Faxing
c Choose Send Fax from the pop-up menu.
d Choose Facsimile from the Output pop-up menu.
8
e Enter a fax number in the Input Fax Number box, and then click Print to send the fax.
NOTE
• If you check the Dial Restriction check box, a confirmation box will appear for you to re-enter the fax
number. Therefore, this feature helps to prevent transmissions to the wrong destination.
143
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing and Faxing
• If you want to send a fax to more than one number, click Add after entering the first fax number. The
destination fax numbers will be listed in the Destination Fax Numbers field.
8
144
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
9
9
Scanning a document using the TWAIN driver
9
The Brother machine software includes a TWAIN Scanner driver for Macintosh. You can use this TWAIN
Scanner driver with any applications that support TWAIN specifications.
When you scan a document, you can either use the ADF (automatic document feeder) or the Flatbed scanner
glass.
Refer to the guide noted below for more information on loading the documents.
See Basic User’s Guide: Using the ADF.
See Basic User’s Guide: Using the scanner glass.
NOTE
If you want to scan from the machine on a network, you must choose the networked machine in the
Device Selector window. The Device Selector window can be opened from the Model pop-up menu in
the main screen of ControlCenter2.
Accessing the TWAIN driver
9
Run your TWAIN-compliant application. The first time you use the Brother TWAIN driver, set it as the default
driver by choosing Select Source (or another menu name for choosing the default driver). For each
document you scan after this, choose Acquire Image Data or Acquire. The scanner setup dialog box
appears.
9
NOTE
The method of choosing the default driver or scanning a document may vary depending on the application
you are using.
145
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
Scanning an image into your computer
9
You can scan a whole page, or a portion by pre-scanning the document.
Scanning a whole page
9
a Load your document.
b Adjust the following settings, if needed, in the scanner setup dialog box:
Resolution
Scan Type
Scanning Area
Document Size
Adjust Image
• Brightness
• Contrast
c Click Start.
When scanning has finished, the image appears in your graphics application.
9
Pre-Scanning an image
9
The PreScan button is used to preview and also lets you crop any unwanted areas from the image. When
you are satisfied with the preview, click the Start button in the Scanner Setup dialog box to scan the image.
a Load your document.
b Click PreScan.
The whole image is scanned into your computer and appears in the Scanning Area.
146
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
c Drag the mouse pointer over the portion you want to scan (1).
1
d Load your document again.
NOTE
9
e Adjust the settings for Resolution, Scan Type, Brightness and Contrast in the Scanner Setup dialog
box as needed.
f Click Start.
This time only the chosen area of the document appears in the application window.
g You can refine the image in your editing software.
NOTE
(For MFC-J4710DW)
Pre-Scanning is not available when choosing 2-sided Scanning.
Scanning a 2-sided document (For MFC-J4710DW)
9
a Load your document.
147
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
b Check 2-sided Scanning and choose Long-edge binding or Short-edge binding.
c Adjust the following settings, if needed, in the scanner setup dialog box:
Resolution
Scan Type
Document Size
Adjust Image
• Brightness
• Contrast
9
d Click Start.
NOTE
• You cannot adjust the scanning area.
• 2-sided scan is available from the ADF only.
148
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
Settings in the Scanner window
9
Resolution
9
You can change the scanning resolution from the Resolution pop-up menu. Higher resolutions take more
memory and transfer time, but produce a finer scanned image. The following table shows the resolutions you
can choose and the available colors.
Resolution
Black & White/
256 Color
True Gray/24bit Color
Gray (Error Diffusion)
100 x 100 dpi
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
150 x 150 dpi
200 x 200 dpi
300 x 300 dpi
400 x 400 dpi
600 x 600 dpi
1200 x 1200 dpi
2400 x 2400 dpi
4800 x 4800 dpi
9600 x 9600 dpi
19200 x 19200 dpi
No
No
No
9
No
Scan Type
9
Black & White
Use for text or line art images.
Gray (Error Diffusion)
Use for photographic images or graphics. (Error Diffusion is a method for creating simulated gray images
without using true gray dots. Black dots are put in a specific pattern to give the gray appearance.)
True Gray
Use for photographic images or graphics. This mode is more exact because it uses up to 256 shades of
gray.
256 Color
Uses up to 256 colors to scan the image.
24bit Color
Uses up to 16.8 million colors to scan the image.
Although using 24bit Color creates an image with the most accurate color reproduction, the image file size
will be about three times larger than a file created using the 256 Color option. It requires the most memory
and has the longest transfer time.
149
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
Document Size
9
Choose one of the following sizes:
Auto
You can scan a standard sized document without any further adjustments to Document Size.
A4 8.3 x 11.7 in (210 x 297 mm)
JIS B5 7.2 x 10.1 in (182 x 257 mm)
Letter 8.5 x 11 in (215.9 x 279.4 mm)
Legal 8.5 x 14 in (215.9 x 355.6 mm) (Available on ADF models)
A5 5.8 x 8.3 in (148 x 210 mm)
JIS B6 5 x 7.2 in (128 x 182 mm)
A6 4.1 x 5.8 in (105 x 148 mm)
Executive 7.25 x 10 1/2 in (184.1 x 266.7 mm)
Business Card 3.5 x 2.4 in (90 x 60 mm)
To scan business cards, choose the Business Card size, and then put the business card face down at
the top left of the scanner glass.
4 x 6 in (10 x 15 cm)
5 x 8 in (13 x 20 cm)
9
3.5 x 5 in (9 x 13 cm)
5 x 7 in (13 x 18 cm)
Postcard 1 3.9 x 5.8 in (100 x 148 mm)
Postcard 2 (Double) 5.8 x 7.9 in (148 x 200 mm)
Custom
After you choose a custom size, you can adjust the scanning area. Click and hold the mouse button as
you drag the mouse to crop the image.
Width: Enter the width of the custom size.
Height: Enter the height of the custom size.
Adjusting the Image
9
When scanning photographs or other images for use in a word processor or other graphics application, try
different settings for the Resolution, Scan Type, Brightness and Contrast to see which setting best suits
your needs.
Brightness
Adjust the setting (-50 to 50) to get the best image. The default value is 0, representing an average, and
is usually suitable for most images.
You can set the Brightness level by dragging the slider to the right or left to lighten or darken the image.
You can also enter a value in the box to set the level.
150
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
If the scanned image is too light, set a lower Brightness level and scan the document again.
If the image is too dark, set a higher Brightness level and scan the document again.
NOTE
The Brightness setting is only available when setting the Scan Type to Black & White,
Gray (Error Diffusion), True Gray or 24bit Color.
9
Contrast
You can increase or decrease the contrast level by moving the slider to the right or left. An increase
emphasizes dark and light areas of the image, while a decrease reveals more details in gray areas. You
can also enter a value in the box to set the Contrast.
NOTE
The Contrast setting is only available when setting the Scan Type to Gray (Error Diffusion), True Gray
or 24bit Color.
Reduce Noise
You can improve and enhance the quality of your scanned images with this selection. The Reduce Noise
setting is available when using 24bit Color and scan resolutions of 300 300 dpi, 400 400 dpi or
600 600 dpi.
151
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
Scanning a document using the ICA driver (Mac OS X v10.6.x,
10.7.x)
9
You can scan a document using the ICA driver. If you installed MFL-Pro Suite from the installer CD-ROM, the
ICA driver has been already installed on your Macintosh. You can also scan directly using the Image Capture
application.
NOTE
The screens in this section are from Mac OS X v10.7.x. The screens on your Macintosh may vary
depending on your operating system version.
a Connect your Brother machine to the computer using a USB cable. Or connect your Brother machine to
the same LAN (if you are using a network model) or Wireless LAN where the computer is connected.
b Launch the Image Capture application.
9
c Select the machine from the list on the left side of the screen.
If you connected the Brother machine and your computer with a USB cable, you will see the machine in
the DEVICES area. If connected via LAN or Wireless LAN, you will see it in the SHARED area.
NOTE
(For Mac OS X v10.7.x)
If you cannot see the machine in the DEVICES area or the SHARED area, hover the mouse cursor over
the area, and then click Show.
152
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
d Place your document in the ADF or on the scanner glass.
If you place the document in the ADF, select Document Feeder for Mode and the size of your document
for Scan Size.
9
If you place the document on the scanner glass, select Flatbed for Mode.
153
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
NOTE
• If your Brother machine does not have an ADF, the Mode option does not appear.
• (For Mac OS X v10.6.x)
When the Detect Separate Items box is unchecked, the document will be scanned as one item and saved
as one file. When the Detect Separate Items box is checked, the program will detect each image and
save them as separate files. If the program does not automatically crop the document as you want, you
can do it manually by dragging the mouse cursor over the portion you want to scan from the dialog box
that can be accessed by clicking on Show Details.
• (For Mac OS X v10.7.x)
When the Detect Enclosing Box is selected for Scan Size, the document will be scanned as one item
and saved as one file. When the Detect Separate Items is selected for Scan Size, the program will detect
each image and save them as separate files. If the program does not automatically crop the document as
you want, you can do it manually by dragging the mouse cursor over the portion you want to scan from the
dialog box that can be accessed by clicking on Show Details.
e Select the destination folder or destination application for Scan To.
9
You can adjust the following settings, if needed, in the dialog box accessed by clicking on Show Details.
Please note that the scan options and settings may vary depending on the machine.
Scan Mode: Choose Document Feeder or Flatbed.
Kind: Choose from Color, Black & White or Text.
Resolution: Choose the resolution you want to scan your document at.
Use Custom Size (Mac OS X v10.7.x): Check this box to customize the document size.
Scan Size or Size: Select the paper size of the document being scanned from the Document Feeder
or the scan area from the Flatbed.
Orientation or Rotation Angle: Select the orientation of the document from the Document Feeder or
the angle of the scan from the flatbed.
Auto selection (Mac OS X v10.7.x): If you check Use Custom Size when using the Flatbed, you can
choose the scanner driver’s automatic detection features.
Duplex (For MFC-J4710DW): Check this box when using 2-sided scan feature from Document
Feeder.
154
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
Scan To: Choose the destination folder or destination application.
Name: Enter the prefix text used for the name of the scanned image.
Format: Select the file format of the scanned data.
Combine into single document (Mac OS X v10.7.x): When you choose PDF or TIFF for the file
format, check this box to scan a document as one item and save as one file.
Image Correction: From the manual setting you can adjust Brightness, Contrast (Mac OS X v10.7.x
only), Tint, Temperature, Threshold and Saturation.
9
f Click on Scan to start scanning.
Choosing your machine from Print & Fax or Print & Scan
9
a Connect your Brother machine to the computer using a USB cable. Or connect your Brother machine to
the same LAN or Wireless LAN where the computer is connected.
b Select System Preferences from the Apple Menu.
c Click Print & Fax or Print & Scan.
d Select the machine from the list on the left side of the screen and click Open Print Queue.
NOTE
If you do not see the Scan tab on the screen, remove your machine by clicking the - button from the
Print & Fax or Print & Scan list. Then add the machine by clicking the + button.
155
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
e Click on the Scanner icon.
9
f Go to step d of Scanning a document using the ICA driver (Mac OS X v10.6.x, 10.7.x) on page 152 to
continue.
The screens vary depending on the scanning methods you are using.
156
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
Using Presto! PageManager
9
Presto! PageManager is an application for managing the documents in your computer. Since it is compatible
with most image editors and word processing programs, Presto! PageManager gives you unmatched control
over your files. You can easily manage your documents, edit your E-mail and files and read documents with
the OCR software built into Presto! PageManager.
If you use the machine as a scanner, we recommend that you install Presto! PageManager. You can install
Presto! PageManager from Brother Support on the installation CD-ROM or go to
NOTE
The complete NewSoft Presto! PageManager 9 User’s Guide can be viewed from Help in the menu bar in
NewSoft Presto! PageManager 9.
Features
9
OCR: In one step you can scan an image, recognize the text, and edit it with a word processor.
Image Editing: Enhance, crop and rotate images, or open them with an image-editing program of your
choice.
Annotation: Add removable notes, stamps and drawings to images.
Folders Window: View and arrange your folder hierarchy for easy access.
View Window: View files as thumbnails, list or Cover Flow for easy identification.
9
System requirements for Presto! PageManager
9
Mac OS X v10.5.8, 10.6.x, 10.7.x
Hard disk drive with at least 400 MB of free disk space
157
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
Technical support
9
For USA
Company name:
Postal Address:
Telephone:
Fax:
NewSoft America Inc.
47102 Mission Falls Court, Suite 202 Fremont CA 94539
510-770-8900
510-770-8980
E-mail Address:
URL:
For Canada
E-mail Address:
Germany
Company name:
Postal Address:
Telephone:
SoftBay GmbH
Carlstraße 50, D-52531, Übach-Palenberg, Germany
0900 1 409640
E-mail Address:
URL:
9
UK
Company name:
Postal Address:
Avanquest UK
The Software Centre East Way, Lee Mill Industrial Estate Plymouth Devon.
PL21 9GE
Telephone:
Fax:
44-01752-201148
44-01752-894833
E-mail Address:
URL:
France
Company name:
Telephone:
E-mail Address:
URL:
5CA
089-965-01-09
158
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
Italy
Company name:
Telephone:
E-mail Address:
URL:
5CA
0899399878
Spain
Company name:
Telephone:
5CA
0807505598
E-mail Address:
Other countries
E-mail Address:
9
159
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter2
10
10
NOTE
• The screens shown in this section are mainly from Mac OS X v10.7.x. Screens on your computer may
vary depending on your operating system and application.
• The features available to you in ControlCenter2 may vary depending on the model number of your
machine.
Using ControlCenter2
10
ControlCenter2 is a software utility that lets you quickly and easily access your often used applications. Using
ControlCenter2 eliminates the need to manually launch specific applications. The icon will appear on the
menu bar. To open the ControlCenter2 window, click the
the following features:
icon and choose Open. ControlCenter2 has
a Scan directly to a file, E-mail, word processor or graphics application of your choice. (1)
b Custom Scan buttons let you configure a button to meet your own application needs. (2)
c Access the Copy features available via your computer and access the PC-FAX applications available for
your device. (Mac OS X v10.5.8, 10.6.x) (3)
d Access the settings available to configure your device. (4)
10
e You can choose which machine ControlCenter2 will connect to from the Model pop-up menu. (5)
You can also open the Device Selector window by choosing Other from the Model pop-up menu.
f You can also open the configuration window for each function by clicking Configuration. (6)
5
6
1
2
3
4
Turning the AutoLoad feature off
10
If you do not want ControlCenter2 to run automatically each time you start your computer, do the following:
a Click the ControlCenter2 icon in the menu bar and choose Preferences.
The ControlCenter2 preference window appears.
160
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter2
b Uncheck Start ControlCenter on computer startup.
c Click OK to close the window.
NOTE
The ControlCenter2 application icon is in Macintosh HD/Applications/Brother.
10
161
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter2
SCAN
10
There are four scan buttons for the Scan to Image, Scan to OCR, Scan to E-mail and Scan to File
features.
Image (Default: Apple Preview)
Lets you scan a page directly into any graphic viewer/editor application. You can choose the destination
®
®
application, such as Adobe Photoshop or any kind of image editing application on your computer.
OCR (Default: Apple TextEdit)
Lets you scan a page or document, automatically run the OCR application and put text (not a graphic
image) into a word processing application. You can choose the target word processing application, such
®
as Microsoft Word or any word processing application on your computer. You must download Presto!
PageManager and install it on your computer. For installation information see Using Presto! PageManager
E-mail (Default: your default E-mail software)
Lets you scan a page or document directly into an E-mail application as a standard attachment. You can
choose the file type and resolution for the attachment.
File
Lets you scan directly to a disk file. You can change the file type and destination folder, as needed.
ControlCenter2 gives you the ability to configure the hardware Scan button on your machine and the
ControlCenter2 software button for each scan feature. To configure the hardware Scan button on your
machine choose the Device Button tab in the configuration menu for each of the SCAN buttons. To configure
the software button in ControlCenter2 choose the Software Button tab in the configuration menu for each of
the SCAN buttons.
10
NOTE
You can change the Scan button settings using your Brother machine - however, these changes are only
temporary.
If you want to make permanent changes, choose the Device Button tab in the configuration menu for
each of the SCAN buttons and configure as required.
162
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter2
File types
10
Choose the type of file to save the scanned images as from the pop-up menu.
For Image, E-mail and File
10
®
Windows Bitmap (*.bmp)
JPEG (*.jpg)
TIFF (*.tif)
TIFF Multi-Page (*.tif)
Portable Network Graphics (*.png)
PDF (*.pdf)
High Compression PDF (*.pdf)
Secure PDF (*.pdf)
Searchable PDF (*.pdf)
For OCR
10
Searchable PDF (*.pdf)
Text (*.txt)
Rich Text Format (*.rtf)
HTML (*.htm)
10
Excel 97 (*.xls)
NOTE
If you set the file type to TIFF or TIFF Multi-Page, you can choose Uncompressed or Compressed.
Document Size
10
You can choose the document size from the pull-down list. If you choose a 1 to 2 document size, such as
1 to 2 (A4), the scanned image will be divided into two A5 size documents.
Advanced Settings
10
You can configure advanced settings. Click the Advanced Settings button in the scan settings dialog box.
163
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter2
Remove Background Color
Removes the base color of documents to make the scanned data more recognizable. When you use this
function, you can select the level from 3 settings: high, medium, and low.
Skip Blank Page (For MFC-J4710DW)
Removes blank pages of the document from the scanning results.
Display Scanning Results (For MFC-J4710DW)
Shows the numbers of total pages saved and blank pages skipped on your computer screen.
Image (example: Apple Preview)
10
The Scan to Image feature lets you scan an image directly into your graphics application for image editing.
a Select the SCAN tab.
10
b Click
(Image).
The Scan to Image dialog box will appear.
164
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter2
c You can configure the scan settings.
To scan and then crop a portion of a page after pre-scanning the document, check the
Show Scanner Interface check box.
(For MFC-J4710DW)
To scan a 2-sided document, check the 2-sided Scanning check box and choose
Long-edge binding or Short-edge binding.
To change the application that you want to use, choose the appropriate application from the
Target Application pop-up menu. You can add an application to the list by clicking Add. If you want
to delete an application, click Delete.
d Click Start Scanning.
Your default application will start and display the image.
NOTE
If you choose Secure PDF from the File Type list, the Set PDF Password dialog box will appear. Enter
your password in the Password and Re-type Password boxes, and then click OK. You can also choose
Secure PDF for Scan to E-mail and Scan to File.
10
165
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter2
OCR (word processing application)
10
The Scan to OCR feature lets you convert the graphic page image data into text which can be edited by any
word processing application. You can change the default word processing application.
a Select the SCAN tab.
b Click
(OCR).
The Scan to OCR dialog box will appear.
10
c You can configure the scan settings.
To scan and then crop a portion of a page after pre-scanning the document, check the
Show Scanner Interface check box.
(For MFC-J4710DW)
To scan a 2-sided document, check the 2-sided Scanning check box and choose
Long-edge binding or Short-edge binding.
To change the word processing application that you want to use, choose the appropriate application
from the Target Application pop-up menu. You can add an application to the list by clicking Add. If
you want to delete an application, click Delete.
d Click Start Scanning.
Your default word processing application will start and display the converted text data.
166
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter2
E-mail
10
The Scan to E-mail feature lets you scan a document to your default E-mail application so you can send the
scanned document as an attachment.
a Select the SCAN tab.
b Click
(E-mail).
The Scan to E-mail dialog box will appear.
10
c You can configure the scan settings.
To scan and then crop a portion of a page after pre-scanning the document, check the
Show Scanner Interface check box.
(For MFC-J4710DW)
To scan a 2-sided document, check the 2-sided Scanning check box and choose
Long-edge binding or Short-edge binding.
To change the E-mail application that you want to use, choose the appropriate application from the
Target Application pop-up menu. You can add an application to the list by clicking Add . If you want
to delete an application, click Delete.
1
When you first start ControlCenter2, a default list of compatible E-mail applications will appear in the pop-up menu. If you are having
trouble using a custom application with ControlCenter2, you should choose an application from the list.
d Click Start Scanning.
Your default E-mail application will start and the image will be attached to a new E-mail.
167
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter2
NOTE
The Scan to E-mail feature does not support Webmail services.
Use the Scan to Image or Scan to File feature to scan a document or picture, and then attach the file of
the scanned data to an E-mail message.
10
168
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter2
File
10
The Scan to File button lets you scan an image to a folder on your hard disk in a supported file format.
Therefore, this feature allows you to easily archive your paper documents.
a Select the SCAN tab.
b Click
(File).
The Scan to File dialog box will appear.
10
c You can configure the scan settings.
To scan and then crop a portion of a page after pre-scanning the document, check the
Show Scanner Interface check box.
(For MFC-J4710DW)
To scan a 2-sided document, check the 2-sided Scanning check box and choose
Long-edge binding or Short-edge binding.
To change the file name, enter the file name you want to use for the document (up to 100 characters)
in the File Name box. The file name will be the file name you entered plus the current date and a
sequential number.
Choose the file type for the saved image from the File Type pop-up menu. You can save the file to
the default folder, or choose your preferred folder by clicking Browse.
To show where the scanned image is saved when scanning is finished, check the Show Folder check
box. If you want to specify the destination of the scanned image every time, check the
Show Save As window check box.
d Click Start Scanning.
The image will be saved in the folder you have chosen.
169
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter2
Changing the default settings of a button
10
You can change the default settings of the
(Image),
(OCR),
(E-mail), and
(File) buttons.
a Click the button while holding down the Ctrl key and choose Software Button. The settings dialog box
will appear.
b Choose the settings for File Type, Show Scanner Interface, Resolution, Scan Type,
Document Size, Brightness, Contrast, and Continuous Scanning as needed.
(For MFC-J4710DW)
You can also choose the setting for 2-sided Scanning.
c Click OK. The new settings will be used as the default settings.
NOTE
To preview and configure the scanned image, check the Show Scanner Interface check box in the setting
dialog box.
Configuring Scan button settings
10
The Device Button tab lets you configure your machine’s Scan button settings.
There are four scan functions that you can configure to suit your scanning needs.
10
Click the button while holding down the Ctrl key and choose Device Button. The settings dialog box will
appear.
NOTE
You can change the Scan button settings using your Brother machine - however, these changes are only
temporary.
170
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter2
10
171
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter2
CUSTOM SCAN
10
There are four buttons which you can configure to fit your scanning needs.
To customize a button, click the button while holding down the Ctrl key, and the configuration window
appears. There are four scan functions: Scan to Image, Scan to OCR, Scan to E-mail and Scan to File.
Scan to Image
Lets you scan a page directly into any image viewer/editor software. You can choose any image editor
application on your computer as a destination.
Scan to OCR
Converts scanned documents into editable text files. You can choose the destination application for the
editable text. You must download Presto! PageManager and install it on your computer. For installation
Scan to E-mail
Attaches the scanned images to an E-mail message. You can also choose the file attachment type and
create a quick send list of E-mail addresses chosen from your E-mail address book.
Scan to File
Lets you save a scanned image to any folder on a local or network hard disk. You can also choose the file
type to be used.
10
172
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter2
File types
10
Document Size
10
You can choose the document size from the pull-down list. If you choose a 1 to 2 document size, such as
1 to 2 (A4), the scanned image will be divided into two A5 size documents.
Advanced Settings
10
User-defined button
10
To customize a button, click the button while holding down the Ctrl key, and the configuration window
appears. Follow these guidelines for button configuration.
10
173
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter2
Scan to Image/OCR/E-mail/File
10
General tab
Enter a name in Name for Custom (up to 30 characters) to create the button name.
Choose the type of scan from the Scan Action selections.
Settings tab (Scan to Image/OCR/ E-mail)
10
Choose the Target Application, File Type, Resolution, Scan Type, Document Size,
2-sided Scanning , Show Scanner Interface, Brightness and Contrast settings.
1
(For MFC-J4710DW)
NOTE
The Scan to E-mail feature does not support Webmail services.
Use the Scan to Image or Scan to File feature to scan a document or picture, and then attach the file of
the scanned data to an E-mail message.
174
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter2
If you choose Secure PDF from the File Type list, the Set PDF Password dialog box appears. Enter your
password in the Password and Re-type Password box and then click OK.
NOTE
Secure PDF is available for Scan to Image, Scan to E-mail and Scan to File.
Settings tab (Scan to File)
10
Choose the file format from the File Type pop-up menu. Save the file to the default folder or choose your
preferred folder by clicking the Browse button.
Choose the Resolution, Scan Type, Document Size, 2-sided Scanning , Show Scanner Interface,
Brightness and Contrast settings.
1
(For MFC-J4710DW)
If you want to specify the destination of the scanned image, check the Show Save As window option.
If you want to scan and then crop a portion of a page after pre-scanning the document, check the
Show Scanner Interface option.
175
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter2
10
176
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter2
COPY / PC-FAX (PC-FAX for MFC models) (Mac OS X v10.5.8,
10.6.x)
10
COPY - Lets you use your computer and any printer driver for enhanced copy operations. You can scan a
page on the machine and print the copies using any of the features of the machine’s printer driver, or you can
direct the copy output to any standard printer driver installed on your computer including network printers.
PC-FAX - Lets you scan a page or document and automatically send the image as a fax from the computer.
You can configure your preferred settings on up to four buttons.
The Copy1-Copy4 buttons can be customized to let you use advanced copy and fax functions.
To use the Copy buttons, configure the printer driver by clicking the button while holding down the Ctrl key.
10
Enter a name in Name for Copy (up to 30 characters) and choose a Copy Ratio option.
Choose the Resolution, Scan Type, Document Size, 2-sided Scanning , Show Scanner Interface,
Brightness and Contrast settings to be used.
1
(For MFC-J4710DW)
Before finishing the Copy button configuration, set the Printer. By clicking the configured copy button, the
print dialog box opens.
177
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter2
For more options click the triangle beside the Printer pop-up menu.
To copy, click the Print button.
To fax, click the disclosure triangle beside the Printer pop-up menu and then choose Send Fax from the
10
178
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter2
DEVICE SETTINGS
10
You can configure the machine settings or check ink levels by clicking a button.
Remote Setup (For MFC models)
Address Book (For MFC models)
Lets you open the Address Book window of the Remote Setup. (See Remote Setup (For MFC models)
Ink Level
Lets you open the Brother Status Monitor, which displays the ink level for each cartridge.
10
179
Download from Www.Somanuals.com. All Manuals Search And Download.
ControlCenter2
Remote Setup (For MFC models)
10
The Remote Setup button lets you open the Remote Setup program window to configure the machine setting
menus.
NOTE
10
Address Book (For MFC models)
10
The Address Book button lets you open the Address Book window in the Remote Setup program, so you
can easily register or change the dial numbers from your computer.
180
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Setup & PhotoCapture Center™
11
11
Remote Setup (For MFC models)
11
The Remote Setup program lets you configure many machine settings from an application. When you
access this application, the settings on your machine will be downloaded automatically to your computer and
displayed on your screen. If you change the settings, you can upload them directly to the machine.
NOTE
The Remote Setup icon is in Macintosh HD/Applications/Brother.
11
OK
Lets you start uploading data to the machine and exit the Remote Setup program. If an error message is
displayed, enter the correct data again and then click OK.
Cancel
Lets you exit the Remote Setup program without uploading data to the machine.
Apply
Lets you upload data to the machine without exiting the Remote Setup program.
182
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Setup & PhotoCapture Center™
Print
Lets you print the chosen items on the machine. You cannot print the data until it is uploaded to the
machine. Click Apply to upload the new data to the machine and then click Print.
Export
Lets you save the current configuration to a file.
Import
Lets you read the settings from a file.
NOTE
• You can use the Export button to save all your settings for your machine.
• If you need to change the machine that was registered to your computer during the installation of MFL-Pro
Suite (See Quick Setup Guide.), or if the network environment was changed, you need to specify the new
machine. Open the Device Selector and choose the new machine. (For network users only)
11
183
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Setup & PhotoCapture Center™
PhotoCapture Center™
11
You can access a memory card or a USB Flash memory drive installed in the machine from a computer.
IMPORTANT
DO NOT start your computer with a memory card or a USB Flash memory drive installed in the media drive
of the machine. You could lose your data or damage the media.
NOTE
• The PhotoCapture Center™ will read only the media that was put in first.
• While the machine is printing from the PhotoCapture Center™, your computer cannot access the
PhotoCapture Center™ for any other operation.
For USB cable users
11
a Open the media slot cover.
b Put a memory card or USB Flash memory drive into your machine.
NOTE
If you create a name for the volume label of the memory card or USB Flash memory drive, the name
appears instead of Removable Disk.
c Double-click the Removable Disk icon. The files and folders on the memory card or USB Flash memory
drive appear on your screen.
11
d You can edit a file and save it to another drive on your computer.
e Quit all applications that are running stored data on the memory card or USB Flash memory drive and
drag the Removable Disk icon into the Trash icon before you remove the memory card or USB Flash
memory drive from the machine.
IMPORTANT
DO NOT remove the memory card or USB Flash memory drive while the LCD is displaying a message.
Otherwise, the card, USB Flash memory drive or data stored on the card could be damaged.
If you remove the memory card or USB Flash memory drive while the LCD is displaying the message, you
must restart your computer once before inserting the same memory card or USB Flash memory drive into
the machine. If you do not restart your computer, the data on your media could be destroyed.
For network users
11
a Open the media slot cover.
b Put a memory card or USB Flash memory drive into your machine.
184
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Setup & PhotoCapture Center™
c Launch any FTP software or any web browser in which FTP is supported.
Your browser software accesses the memory card or USB Flash memory drive using the FTP protocol
and the network Host Name of the machine. In the address bar, enter ftp://XXX.XXX.XXX.XXX (where
XXX.XXX.XXX.XXX is the IP address of your Brother machine).
Your browser software appears and a list of file names on your memory card or USB Flash memory drive
is shown.
d Click the name of the file you want to see.
NOTE
Using certain characters or symbols in a file name on the memory card or USB Flash memory drive may
cause a problem accessing the file. We recommend to only use combinations of the following characters
in a file name.
When you take out a memory card or USB Flash memory drive, do the following to prevent damage
to the memory card or USB Flash memory drive:
11
a Close the browser.
b Wait until the LCD message disappears before taking out the memory card or USB Flash memory drive.
11
IMPORTANT
DO NOT remove the memory card or USB Flash memory drive while the LCD is displaying a message.
Otherwise, the card, USB Flash memory drive or data stored on the card could be damaged.
If you remove the memory card or USB Flash memory drive while the LCD is displaying the message, you
must restart your computer once before inserting the same memory card or USB Flash memory drive into
the machine. If you do not restart your computer, the data on your media could be destroyed.
185
Download from Www.Somanuals.com. All Manuals Search And Download.
USB cable scanning
12
12
Using the Scan button over a USB cable connection
12
NOTE
You can use the Scan button on the Touch Panel to scan documents directly into your word processing,
graphics or E-mail applications, to a folder on your computer, or to a memory card or USB Flash memory
drive.
Before you can use the Scan button, you must install the Brother MFL-Pro Suite software and connect the
machine to your computer. If you installed MFL-Pro Suite from the included CD-ROM, then the correct drivers
and the ControlCenter software are installed.
You can change the Scan button settings using your Brother machine - however, these changes are only
®
temporary. If you want to make permanent changes, use the ControlCenter software. (For Windows , see
NOTE
(For MFC-J4710DW)
• If you want to scan a document using the 2-sided scanning feature, you need to put the document in the
ADF and then choose 2-sided Scan: Long Edge or 2-sided Scan: Short Edge depending on
your document layout.
• Choose your document layout from following the table:
Portrait
Landscape
LCD Message
12
Front
Back
Front
Back
2-sided Scan:
Long Edge
Front
Back
Front
Back
2-sided Scan:
Short Edge
187
Download from Www.Somanuals.com. All Manuals Search And Download.
USB cable scanning
Scan to E-mail
12
You can scan either a black and white or color document into your E-mail application as a file attachment.
NOTE
The Scan to E-mail feature does not support Webmail services.
Use the Scan to Image or Scan to File feature to scan a document or picture, and then attach the file of
the scanned data to an E-mail message.
For MFC-J4510DW/J4710DW
12
a Load your document.
b Press
(Scan).
c Swipe left or right to display
(to E-mail).
d Press
(to E-mail).
The icon moves to the middle and is highlighted in blue.
e Press OK.
Do one of the following:
f Press Options.
g (For MFC-J4710DW)
12
If you want to use 2-sided scanning, press 2-sided Scan.
Press 2-sided Scan: Long Edge or 2-sided Scan: Short Edge.
h Press Set with Touch Panel.
Press On.
NOTE
To use Set with Touch Panel, the ControlCenter software must be installed on the computer that is
connected to the machine.
i Choose the settings for Scan Type, Resolution, File Type, Skip Blank Page and
Remove Background Color as needed.
1
(For MFC-J4710DW)
j Press OK.
k Press Start.
The machine starts scanning the document, creates a file attachment, and launches your E-mail
application displaying a new E-mail.
188
Download from Www.Somanuals.com. All Manuals Search And Download.
USB cable scanning
For MFC-J4310DW/J4410DW/J4610DW
a Load your document.
12
b Press Scan.
c Press s or t to display Scan to email.
d Press Scan to email.
Do one of the following:
e Press Options.
f Press Set with TouchPanel.
Press On.
NOTE
To use Set with TouchPanel, the ControlCenter software must be installed on the computer that is
connected to the machine.
g Choose the settings for Scan Type, Resolution, File Type, and Remove Background as
needed.
h Press OK.
i Press Start.
The machine starts scanning the document, creates a file attachment, and launches your E-mail
application displaying a new E-mail.
NOTE
12
You can change the Scan button settings using your Brother machine - however, these changes are only
®
temporary. If you want to make permanent changes, use the ControlCenter software. (For Windows , see
Scan to Image
12
You can scan a black and white or color document into your graphics application for viewing and editing.
For MFC-J4510DW/J4710DW
12
a Load your document.
b Press
(Scan).
189
Download from Www.Somanuals.com. All Manuals Search And Download.
USB cable scanning
c Swipe left or right to display
(to Image).
d Press
(to Image).
The icon moves to the middle and is highlighted in blue.
e Press OK.
Do one of the following:
f Press Options.
g (For MFC-J4710DW)
If you want to use 2-sided scanning, press 2-sided Scan.
Press 2-sided Scan: Long Edge or 2-sided Scan: Short Edge.
h Press Set with Touch Panel.
Press On.
NOTE
To use Set with Touch Panel, the ControlCenter software must be installed on the computer that is
connected to the machine.
i Choose the settings for Scan Type, Resolution, File Type, Skip Blank Page and
Remove Background Color as needed.
1
(For MFC-J4710DW)
j Press OK.
k Press Start.
12
The machine starts scanning the document.
For MFC-J4310DW/J4410DW/J4610DW
a Load your document.
12
b Press Scan.
c Press s or t to display Scan to Image.
d Press Scan to Image.
Do one of the following:
e Press Options.
190
Download from Www.Somanuals.com. All Manuals Search And Download.
USB cable scanning
f Press Set with TouchPanel.
Press On.
NOTE
To use Set with TouchPanel, the ControlCenter software must be installed on the computer that is
connected to the machine.
g Choose the settings for Scan Type, Resolution, File Type and Remove Background as
needed.
h Press OK.
i Press Start.
The machine starts scanning the document.
NOTE
You can change the Scan button settings using your Brother machine - however, these changes are only
®
temporary. If you want to make permanent changes, use the ControlCenter software. (For Windows , see
Scan to OCR
12
If your original document is text, you can use Nuance™ PaperPort™ 12SE or Presto! PageManager to scan
the document and convert it into a text file which can then be edited using a word processing application of
your choice.
For MFC-J4510DW/J4710DW
12
12
a Load your document.
b Press
(Scan).
c Swipe left or right to display
(to OCR).
d Press
(to OCR).
The icon moves to the middle and is highlighted in blue.
e Press OK.
Do one of the following:
f Press Options.
191
Download from Www.Somanuals.com. All Manuals Search And Download.
USB cable scanning
g (For MFC-J4710DW)
If you want to use 2-sided scanning, press 2-sided Scan.
Press 2-sided Scan: Long Edge or 2-sided Scan: Short Edge.
h Press Set with Touch Panel.
Press On.
NOTE
To use Set with Touch Panel, the ControlCenter software must be installed on the computer that is
connected to the machine.
i Choose the settings for Skip Blank Page , Scan Type, Resolution and File Type as needed.
1
(For MFC-J4710DW)
j Press OK.
k Press Start.
The machine starts scanning the document.
For MFC-J4310DW/J4410DW/J4610DW
a Load your document.
12
b Press Scan.
c Press s or t to display Scan to OCR.
d Press Scan to OCR.
Do one of the following:
12
e Press Options.
f Press Set with TouchPanel.
Press On.
NOTE
To use Set with TouchPanel, the ControlCenter software must be installed on the computer that is
connected to the machine.
g Choose the settings for Scan Type, Resolution and File Type as needed.
h Press OK.
i Press Start.
The machine starts scanning the document.
192
Download from Www.Somanuals.com. All Manuals Search And Download.
USB cable scanning
NOTE
• You can change the Scan button settings using your Brother machine - however, these changes are only
®
temporary. If you want to make permanent changes, use the ControlCenter software. (For Windows , see
®
• (Windows )
Nuance™ PaperPort™ 12SE must be installed on your computer.
• (Macintosh)
You must download Presto! PageManager and install it on your computer for the OCR feature to work from
• The Scan to OCR function is available for English, French, German, Dutch, Italian, Spanish, Portuguese,
Danish, Swedish, Japanese, Traditional Chinese, Simplified Chinese and Korean.
Scan to File
12
You can scan a black and white or a color document into your computer and save it as a file in the folder you
choose. The file type and specific folder are based on your chosen settings in the Scan to File configuration
®
For MFC-J4510DW/J4710DW
12
a Load your document.
12
b Press
(Scan).
c Swipe left or right to display
(to File).
d Press
(to File).
The icon moves to the middle and is highlighted in blue.
e Press OK.
Do one of the following:
f Press Options.
g (For MFC-J4710DW)
If you want to use 2-sided scanning, press 2-sided Scan.
193
Download from Www.Somanuals.com. All Manuals Search And Download.
USB cable scanning
Press 2-sided Scan: Long Edge or 2-sided Scan: Short Edge.
h Press Set with Touch Panel.
Press On.
NOTE
To use Set with Touch Panel, the ControlCenter software must be installed on the computer that is
connected to the machine.
i Choose the settings for Scan Type, Resolution, File Type, Skip Blank Page and
Remove Background Color as needed.
1
(For MFC-J4710DW)
j Press OK.
k Press Start.
The machine starts scanning the document.
For MFC-J4310DW/J4410DW/J4610DW
a Load your document.
12
b Press Scan.
c Press s or t to display Scan to File.
d Press Scan to File.
Do one of the following:
12
e Press Options.
f Press Set with TouchPanel.
Press On.
NOTE
To use Set with TouchPanel, the ControlCenter software must be installed on the computer that is
connected to the machine.
g Choose the settings for Scan Type, Resolution, File Type and Remove Background as
needed.
h Press OK.
i Press Start.
The machine starts scanning the document.
194
Download from Www.Somanuals.com. All Manuals Search And Download.
USB cable scanning
NOTE
You can change the Scan button settings using your Brother machine - however, these changes are only
®
temporary. If you want to make permanent changes, use the ControlCenter software. (For Windows , see
12
195
Download from Www.Somanuals.com. All Manuals Search And Download.
USB cable scanning
Scan to Media
12
You can scan black and white and color documents directly to a memory card or USB Flash memory drive.
Black and white documents may be stored in the PDF (*.PDF) or TIFF file formats (*.TIF). Color documents
may be stored in PDF (*.PDF) or JPEG (*.JPG) file formats. File names are based on the current date. For
example, the fifth image scanned on July 1, 2012 would be named 07011205.PDF. You can change the color,
quality and file name.
Scan Type
Resolution
File Format Options
Default File Format
Black and White
100 dpi / 200 dpi / 300 dpi / TIFF / PDF
600 dpi / Auto
PDF
Color
100 dpi / 200 dpi / 300 dpi / JPEG / PDF
600 dpi / Auto
PDF
NOTE
When you set the Resolution to Auto, the machine will automatically choose the best resolution for the file
format you selected.
Auto Crop (For MFC-J4510DW/J4710DW)
12
You can scan multiple documents placed on the scanner glass. An individual document can be previewed on
the LCD before you save it. When choosing Auto Crop, the machine will scan each document and create
separate files. For example, if you place three documents on the scanner glass, the machine will scan and
create three separate files. If you want to create a three page file, choose TIFF or PDF for File Type.
1
A4
A4
12
1
3
4
2
1
1 0.4 in. (10 mm) or greater
2 0.8 in. (20 mm) or greater (bottom)
196
Download from Www.Somanuals.com. All Manuals Search And Download.
USB cable scanning
NOTE
The Auto Crop feature is supported by technology from Reallusion, Inc.
Guidelines for Auto Crop
12
This setting is only available for documents that are rectangular or square.
If your document is too long or wide, this setting does not work properly.
You must place the documents away from the edges of the scanner glass as shown in the illustration.
You must place the documents at least 0.4 in. (10 mm) apart from each other.
Auto Crop adjusts the skew of the document on the scanner glass, but if your document is skewed more
than 10 degrees, this setting will not work.
The ADF must be empty when using Auto Crop.
The Auto Crop feature is available for up to a maximum of 16 documents depending on the size of your
documents.
For MFC-J4510DW/J4710DW
a Load your document.
12
b Open the media slot cover.
c Put a memory card or USB Flash memory drive into your machine.
The LCD screen automatically changes.
Press Scan to Media.
12
IMPORTANT
DO NOT remove the memory card or USB Flash memory drive while the LCD is displaying a message.
Otherwise, the card, USB Flash memory drive or data stored on the card could be damaged.
If you remove the memory card or USB Flash memory drive while the LCD is displaying the message, you
must restart your computer once before inserting the same memory card or USB Flash memory drive into
the machine. If you do not restart your computer, the data on your media could be destroyed.
d Do one of the following:
e Press Options.
Auto Crop, Skip Blank Page and Remove Background Color as needed.
1
(For MFC-J4710DW)
197
Download from Www.Somanuals.com. All Manuals Search And Download.
USB cable scanning
NOTE
• If you choose color in the quality setting, you cannot choose TIFF.
• If you choose black and white in the quality setting, you cannot choose JPEG.
g The file name is set automatically. However, you can create a name of your choice using the character
buttons on the LCD. Press File Name and then enter the file name. You can only change the first 6
digits of the file name.
Press OK.
h Press OK.
NOTE
If you want to save the settings as a shortcut, press Save as Shortcut. For more information, see the
Advanced User’s Guide.
i Press Start.
If you are using the scanner glass, the LCD displays Next page?. Press Yes or No. After you finish
scanning, make sure you choose No before removing the memory card or USB Flash memory drive from
the machine.
For MFC-J4310DW/J4410DW/J4610DW
a Load your document.
12
b Open the media slot cover.
c Put a memory card or USB Flash memory drive into your machine.
IMPORTANT
DO NOT remove the memory card or USB Flash memory drive while the LCD is displaying a message.
Otherwise, the card, USB Flash memory drive or data stored on the card could be damaged.
12
If you remove the memory card or USB Flash memory drive while the LCD is displaying the message, you
must restart your computer once before inserting the same memory card or USB Flash memory drive into
the machine. If you do not restart your computer, the data on your media could be destroyed.
d Press
.
e Press Scan.
f Press Scan to Media.
Do one of the following:
g Press Options.
198
Download from Www.Somanuals.com. All Manuals Search And Download.
USB cable scanning
h Choose the settings for Scan Type, Resolution, File Type, and Remove Background as
needed.
NOTE
• If you choose color in the quality setting, you cannot choose TIFF.
• If you choose black and white in the quality setting, you cannot choose JPEG.
i The file name is set automatically. However, you can create a name of your choice using the character
buttons on the LCD. You can only change the first 6 digits of the file name.
Press s or t to display File Name. Press File Name.
Enter the file name and press OK.
j Press OK.
k Press Start.
If you are using the scanner glass, the LCD displays Next Page?. After you finish scanning, make sure
you choose No before removing the memory card or USB Flash memory drive from the machine.
How to set a new default for Scan to Media
12
Setting the new default (For MFC-J4510DW/J4710DW)
12
a Open the media slot cover.
b Put a memory card or USB Flash memory drive into your machine.
The LCD screen automatically changes.
Press Scan to Media.
c Press Options.
12
Skip Blank Page and Remove Background Color as needed.
1
(For MFC-J4710DW)
e Swipe up or down, or press a or b to choose Set New Default.
Press Set New Default.
f Press Yes to confirm.
g Press
.
Factory reset (For MFC-J4510DW/J4710DW)
12
a Open the media slot cover.
b Put a memory card or USB Flash memory drive into your machine.
The LCD screen automatically changes.
Press Scan to Media.
199
Download from Www.Somanuals.com. All Manuals Search And Download.
USB cable scanning
c Press Options.
d Swipe up or down, or press a or b to choose Factory Reset.
Press Factory Reset.
e Press Yes to confirm.
f Press
.
Setting the new default (For MFC-J4310DW/J4410DW/J4610DW)
12
a Put a memory card or USB Flash memory drive into your machine.
The LCD screen automatically changes.
Press
.
b Press Scan.
c Press s or t to display Scan to Media.
Press Scan to Media.
Press Options.
d Choose the settings for Scan Type, Resolution, File Type and Remove Background as
needed.
e Press s or t to display Set New Default.
Press Set New Default.
Press OK.
f Press Yes.
g Press
.
Factory reset (For MFC-J4310DW/J4410DW/J4610DW)
12
12
a Put a memory card or USB Flash memory drive into your machine.
The LCD screen automatically changes.
Press
.
b Press Scan.
c Press s or t to display Scan to Media.
Press Scan to Media.
Press Options.
d Press s or t to display Factory Reset.
Press Factory Reset.
e Press Yes.
f Press
.
200
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scanning
13
13
To use the machine as a network scanner, the machine must be configured with a TCP/IP address. You can
set or change the address settings from the control panel (See Network User’s Guide: Control panel setup.)
or by using the BRAdmin Light software. If you installed the machine following the instructions for a network
user in the Quick Setup Guide then the machine should already be configured for your network.
NOTE
• For network scanning, a maximum of 25 clients can be connected to one machine on a network. For
example, if 30 clients try to connect at once, 5 of those clients will not be shown on the LCD, or connected.
®
• (Windows )
If your computer is protected by a firewall, and is unable to network scan, you may need to configure the
®
firewall settings. If you are using Windows Firewall and you installed MFL-Pro Suite from the CD-ROM,
the necessary Firewall settings have already been made. For more information, see Firewall settings (For
Before using Network Scanning
13
Network license (Windows®)
13
This product includes a computer license for up to 2 users.
This license supports the installation of the MFL-Pro Suite software including Nuance™ PaperPort™ 12SE
on up to 2 PCs on the network.
If you want to use more than 2 PCs with Nuance™ PaperPort™ 12SE installed, please buy the Brother NL-5
pack which is a multiple computer license agreement pack for up to 5 additional users. To buy the NL-5 pack,
contact your Brother dealer.
NOTE
Depending on your model Nuance™ PaperPort™ 12SE may not be included. If it is not included, please
use other software applications that support scanning.
13
Configuring Network Scanning for Windows®
13
If you are using a different machine than the one that was originally registered to your computer during the
installation of MFL-Pro Suite software, follow the steps below.
®
a (Windows XP)
Click the Start button, Control Panel, Printers and Other Hardware, then Scanners and Cameras
(or Control Panel, Scanners and Cameras).
®
(Windows Vista )
Click the
button, Control Panel, Hardware and Sound, then Scanners and Cameras.
®
(Windows 7)
201
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scanning
Click the
button, All Programs, Brother, MFC-XXXX, Scanner Settings, then
Scanners and Cameras.
b Do one of the following:
®
Windows XP
Right-click the Scanner Device icon and choose Properties.
The Network Scanner Properties dialog box appears.
®
®
Windows Vista and Windows 7
Click the Properties button.
NOTE
®
®
(Windows Vista and Windows 7)
If the User Account Control screen appears, do the following:
• For users who have administrator rights: Click Continue or Yes.
• For users who do not have administrator rights: Enter the administrator password and click OK or Yes.
13
202
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scanning
c Click the Network Setting tab and choose the appropriate connection method.
Specify your machine by address
Enter the IP address of the machine in IP Address, and then click Apply or OK.
Specify your machine by name
13
1
2
Enter the machine node name in Node Name, or click Browse and choose the machine you want
to use.
Click OK.
13
203
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scanning
d Click the Scan To Button tab and enter your computer name in the Display Name field. The machine’s
LCD displays the name you enter. The default setting is your computer name. You can enter any name
that you like.
e If you want to avoid receiving unwanted documents, enter a 4-digit PIN number in the Pin number and
Retype Pin number field. To send data to a computer protected by a PIN number, the LCD prompts you
to enter the PIN number before the document can be scanned and sent to the computer. (See Using the
Configuring network scanning for Macintosh
13
If you want to scan from the machine on a network, you must choose the networked machine in the
Device Selector window. The Device Selector window can be opened from the Model pop-up menu in the
main screen of ControlCenter2. If you have already installed the MFL-Pro Suite software following the
network installation steps in the Quick Setup Guide then this selection should already be made.
To use the machine as a network scanner, the machine must be configured with a TCP/IP address. You can
set or change the address settings from the control panel. See Network User’s Guide: Control Panel Setup.
13
a Click the icon and choose Open. The ControlCenter2 window will open.
b Choose Other from the Model pop-up menu in the main screen of ControlCenter2. The Device Selector
window appears.
c Specify your machine by IP address or mDNS service name. To change the IP address, enter the new
IP address.
You can also choose a machine from the list of the machines available. Click Browse to show the list.
204
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scanning
d Click OK.
NOTE
• To use the Scan button features on the machine, click the check box for
Register your computer with the "Scan To" functions at the machine. Then enter the name you
want to be displayed on the machine’s LCD for your computer. You can use up to 15 characters.
• You can avoid receiving unwanted documents by setting a 4-digit PIN number. Enter your PIN number in
the PIN number and Retype PIN number field. To send data to a computer protected by a PIN number,
the LCD prompts you to enter the PIN number before the document can be scanned and sent to the
13
205
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scanning
Using the Scan button on your network
13
NOTE
Scan to E-mail (PC)
13
When you choose Scan to E-mail (PC), your document will be scanned and sent directly to the computer you
designated on your network. The ControlCenter software will launch the default E-mail application on the
designated computer. You can scan and send a black and white or color document from the computer as an
E-mail attachment.
NOTE
The Scan to E-mail feature does not support Webmail services.
Use the Scan to Image or Scan to File feature to scan a document or picture, and then attach the file of
the scanned data to an E-mail message.
For MFC-J4510DW/J4710DW
13
a Load your document.
b Press
(Scan).
c Swipe left or right to display
(to E-mail).
d Press
(to E-mail).
The icon moves to the middle and is highlighted in blue.
e Press OK.
13
f Swipe up or down, or press a or b to display the computer that you want to use to E-mail the document.
g Press the computer name.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the computer on the LCD.
Press OK.
Do one of the following:
NOTE
If you want to save the computer as a shortcut, press Save as Shortcut.
h Press Options.
206
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scanning
i (For MFC-J4710DW)
If you want to use 2-sided scanning, press 2-sided Scan.
Press 2-sided Scan: Long Edge or 2-sided Scan: Short Edge.
j Press Set with Touch Panel.
Press On.
NOTE
To use Set with Touch Panel, the ControlCenter software must be installed on a computer that is
connected to the machine.
k Choose the settings for Scan Type, Resolution, File Type, Skip Blank Page and
Remove Background Color as needed.
1
(For MFC-J4710DW)
l Press OK.
m Press Start.
The machine starts scanning the document, creates a file attachment, and launches your E-mail
application displaying a new E-mail.
For MFC-J4310DW/J4410DW/J4610DW
a Load your document.
13
b Press Scan.
c Press s or t to display Scan to email.
d Press Scan to email.
e Press s or t to display the computer that you want to use to E-mail the document.
f Press the computer name.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the computer on the LCD.
Press OK.
13
Do one of the following:
g Press Options.
h Press Set with TouchPanel.
Press On.
NOTE
To use Set with TouchPanel, the ControlCenter software must be installed on a computer that is
connected to the machine.
207
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scanning
i Choose the settings for Scan Type, Resolution, File Type, and Remove Background as
needed.
j Press OK.
k Press Start.
The machine starts scanning the document, creates a file attachment, and launches your E-mail
application displaying a new E-mail.
NOTE
You can change the Scan button settings using your Brother machine - however, these changes are only
®
temporary. If you want to make permanent changes, use the ControlCenter software. (For Windows , see
Scan to E-mail Server (For MFC models)
13
Scan to E-mail (E-mail Server) can assign an E-mail address allowing you to send, receive or forward
documents over a Local Area Network or the Internet to computers or other Internet Fax machines. In order
to use this function, download the necessary software from the Brother Solutions Center
When you choose Scan to E-mail (E-mail Server), you can scan a black and white or color document and
send it directly to an E-mail address from the machine. You can choose PDF or TIFF for black and white, and
PDF or JPEG for color.
For MFC-J4510DW/J4710DW
13
a Load your document.
b Press
(Scan).
13
c Swipe left or right to display
(to E-mail Server).
d Press
(to E-mail Server).
The icon moves to the middle and is highlighted in blue.
e Press OK.
f Press Address Book or Manual to input the E-mail address.
If you choose Address Book, select the E-mail address. Press OK.
If you choose Manual, enter the E-mail address using the character buttons on the LCD. Press OK.
g Press OK.
208
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scanning
h Do one of the following:
i Press Options.
j Choose the settings for 2-sided Scan , Scan Type, Resolution and File Type as needed.
1
(For MFC-J4710DW)
k Press OK.
NOTE
If you want to save the settings as a shortcut, press Save as Shortcut.
l Press Start.
The machine starts scanning the document.
For MFC-J4310DW/J4410DW/J4610DW
a Load your document.
13
b Press Scan.
c Press s or t to display Scan to E-mail Server.
d Press Scan to E-mail Server.
e Press Manual or Address Book to input the E-mail address.
If you choose Manual, enter the E-mail address using the character buttons on the LCD.
If you choose Address Book, do one of the following:
Press Alphabetical or Numerical, and then press the E-mail address you want to send to.
Press the 2-digit Speed Dial number using the dial pad.
13
f Do one of the following:
g Press Options.
h Choose the settings for Scan Type, Resolution and File Type as needed.
i Press OK.
j Press Start.
The machine starts scanning the document.
209
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scanning
Setting new default settings for Scan to E-mail Server
13
Setting the new default (For MFC-J4510DW/J4710DW)
13
b Press Options.
c Choose the settings for Scan Type, Resolution and File Type as needed.
d Swipe up or down, or press a or b to choose Set New Default.
Press Set New Default.
e Press Yes to confirm.
f Press
.
Factory reset (For MFC-J4510DW/J4710DW)
13
b Press Options.
c Swipe up or down, or press a or b to choose Factory Reset.
Press Factory Reset.
d Press Yes to confirm.
e Press
.
Setting the new default (For MFC-J4310DW/J4410DW/J4610DW)
b Press Options.
13
13
c Choose the settings for Scan Type, Resolution and File Type as needed.
d Press s or t to display Set New Default.
Press Set New Default.
Press OK.
e Press Yes.
f Press
.
Factory Reset (For MFC-J4310DW/J4410DW/J4610DW)
b Press Options.
13
210
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scanning
c Press s or t to display Factory Reset.
Press Factory Reset.
d Press Yes.
e Press
.
Scan to Image
13
When you choose Scan to Image, your document will be scanned and sent directly to the computer you
designated on your network. The ControlCenter software will launch the default graphics application on the
designated computer.
For MFC-J4510DW/J4710DW
13
a Load your document.
b Press
(Scan).
c Swipe left or right to display
(to Image).
d Press
(to Image).
The icon moves to the middle and is highlighted in blue.
e Press OK.
f Swipe up or down, or press a or b to display the computer you want to send to.
g Press the computer name.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the computer on the LCD.
Press OK.
Do one of the following:
13
NOTE
If you want to save the computer as a shortcut, press Save as Shortcut.
h Press Options.
i (For MFC-J4710DW)
If you want to use 2-sided scanning, press 2-sided Scan.
Press 2-sided Scan: Long Edge or 2-sided Scan: Short Edge.
j Press Set with Touch Panel.
Press On.
211
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scanning
NOTE
To use Set with Touch Panel, the ControlCenter software must be installed on a computer that is
connected to the machine.
k Choose the settings for Scan Type, Resolution, File Type, Skip Blank Page and
Remove Background Color as needed.
1
(For MFC-J4710DW)
l Press OK.
m Press Start.
The machine starts scanning the document.
For MFC-J4310DW/J4410DW/J4610DW
a Load your document.
13
b Press Scan.
c Press s or t to display Scan to Image.
d Press Scan to Image.
e Press s or t to display the computer you want to send to.
f Press the computer name.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the computer on the LCD.
Press OK.
Do one of the following:
g Press Options.
13
h Press Set with TouchPanel.
Press On.
NOTE
To use Set with TouchPanel, the ControlCenter software must be installed on a computer that is
connected to the machine.
i Choose the settings for Scan Type, Resolution, File Type and Remove Background as
needed.
j Press OK.
k Press Start.
The machine starts scanning the document.
212
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scanning
NOTE
You can change the Scan button settings using your Brother machine - however, these changes are only
®
temporary. If you want to make permanent changes, use the ControlCenter software. (For Windows , see
Scan to OCR
13
When you choose Scan to OCR, your document will be scanned and sent directly to the computer you
designated on your network. The ControlCenter software will launch the Nuance™ PaperPort™ 12SE
software or Presto! PageManager and convert your document into text that can be viewed and edited from a
word processing application on the designated computer.
For MFC-J4510DW/J4710DW
13
a Load your document.
b Press
(Scan).
c Swipe left or right to display
(to OCR).
d Press
(to OCR).
The icon moves to the middle and is highlighted in blue.
e Press OK.
f Swipe up or down, or press a or b to display the computer you want to send to.
g Press the computer name.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the computer on the LCD.
13
Press OK.
Do one of the following:
NOTE
If you want to save the computer as a shortcut, press Save as Shortcut.
h Press Options.
i (For MFC-J4710DW)
If you want to use 2-sided scanning, press 2-sided Scan.
Press 2-sided Scan: Long Edge or 2-sided Scan: Short Edge.
213
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scanning
j Press Set with Touch Panel.
Press On.
NOTE
To use Set with Touch Panel, the ControlCenter software must be installed on a computer that is
connected to the machine.
k Choose the settings for Skip Blank Page , Scan Type, Resolution and File Type as needed.
1
(For MFC-J4710DW)
l Press OK.
m Press Start.
The machine starts scanning the document.
For MFC-J4310DW/J4410DW/J4610DW
a Load your document.
13
b Press Scan.
c Press s or t to display Scan to OCR.
d Press Scan to OCR.
e Press s or t to display the computer you want to send to.
f Press the computer name.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the computer on the LCD.
Press OK.
Do one of the following:
13
g Press Options.
h Press Set with TouchPanel.
Press On.
NOTE
To use Set with TouchPanel, the ControlCenter software must be installed on a computer that is
connected to the machine.
i Choose the settings for Scan Type, Resolution and File Type as needed.
j Press OK.
k Press Start.
The machine starts scanning the document.
214
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scanning
NOTE
• You can change the Scan button settings using your Brother machine - however, these changes are only
®
temporary. If you want to make permanent changes, use the ControlCenter software. (For Windows , see
®
• (Windows )
Nuance™ PaperPort™ 12SE must be installed on your computer.
• (Macintosh)
You must download Presto! PageManager and install it on your computer for the OCR feature to work from
• The Scan to OCR function is available for English, French, German, Dutch, Italian, Spanish, Portuguese,
Danish, Swedish, Japanese, Traditional Chinese, Simplified Chinese and Korean.
Scan to File
13
When you choose Scan to File, you can scan a black and white or color document and send it directly to a
computer you designated on your network. The file will be saved in the folder and file format that you have
configured in ControlCenter.
For MFC-J4510DW/J4710DW
13
a Load your document.
b Press
(Scan).
c Swipe left or right to display
(to File).
13
d Press
(to File).
The icon moves to the middle and is highlighted in blue.
e Press OK.
f Swipe up or down, or press a or b to display the computer you want to send to.
g Press the computer name.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the computer on the LCD.
Press OK.
Do one of the following:
215
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scanning
NOTE
If you want to save the computer as a shortcut, press Save as Shortcut.
h Press Options.
i (For MFC-J4710DW)
If you want to use 2-sided scanning, press 2-sided Scan.
Press 2-sided Scan: Long Edge or 2-sided Scan: Short Edge.
j Press Set with Touch Panel.
Press On.
NOTE
To use Set with Touch Panel, the ControlCenter software must be installed on a computer that is
connected to the machine.
k Choose the settings for Scan Type, Resolution, File Type, Skip Blank Page and
Remove Background Color as needed.
1
(For MFC-J4710DW)
l Press OK.
m Press Start.
The machine starts scanning the document.
For MFC-J4310DW/J4410DW/J4610DW
a Load your document.
13
b Press Scan.
c Press s or t to display Scan to File.
d Press Scan to File.
13
e Press s or t to display the computer you want to send to.
f Press the computer name.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the computer on the LCD.
Press OK.
Do one of the following:
g Press Options.
h Press Set with TouchPanel.
Press On.
216
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scanning
NOTE
To use Set with TouchPanel, the ControlCenter software must be installed on a computer that is
connected to the machine.
i Choose the settings for Scan Type, Resolution, File Type and Remove Background as
needed.
j Press OK.
k Press Start.
The machine starts scanning the document.
NOTE
You can change the Scan button settings using your Brother machine - however, these changes are only
®
temporary. If you want to make permanent changes, use the ControlCenter software. (For Windows , see
13
217
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scanning
Scan to FTP
13
When you choose Scan to FTP, you can scan a black and white or color document directly to an FTP server
on your local network, or on the internet.
The details required to use Scan to FTP can be entered by using Web Based Management to pre-configure
and store the details in an FTP Profile.
NOTE
• Scan to FTP is available when FTP profiles are configured by using Web Based Management.
®
®
®
• We recommend Microsoft Internet Explorer 8.0/9.0 for Windows and Safari 5.0 for Macintosh. Please
also make sure that JavaScript and Cookies are always enabled in whichever browser you use. If a
different web browser is used, make sure it is compatible with HTTP 1.0 and HTTP 1.1.
To use Web Based Management, type http://xxx.xxx.xxx.xxx (where xxx.xxx.xxx.xxx is the IP
address of your machine) into your browser and then you can configure or change the settings in
Scan to FTP/Network in the Scan tab. You can configure up to five FTP server profiles and you can choose
what profile numbers (1 to 5) to use for Scan to FTP settings in Scan to FTP/Network Profile.
NOTE
Refer to the guide noted below for information about how to find the IP address of your machine.
See Network User’s Guide: Printing the Network Configuration Report.
In addition to the seven preset file names you can store two user defined file names that can be used for
creating an FTP Server Profile.
Choose Scan to FTP/Network in Web Based Management. In Create a User Defined File Name, enter a
file name in one of the two user defined fields and click Submit. A maximum of 15 characters can be entered
in each of the user defined name fields.
13
218
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scanning
NOTE
Do not use unsuitable characters in the file name (for example ?, /, \, or *). They may cause a sending error
when using Scan to FTP.
Configuring the FTP Default Settings
13
You can set Passive Mode to Off or On depending on your FTP server and network firewall configuration.
By default this setting is On. You can also change the port number used to access the FTP server. The default
for this setting is port 21. In most cases these two settings can remain as default.
a Choose FTP in Scan to FTP/Network from the Scan tab. Click Submit.
b Choose the Profile you want to configure in Scan to FTP/Network Profile.
c Enter the name that you want to use for the profile of the FTP server. This name will be displayed on the
LCD of the machine and can be up to 15 characters.
d The Host Address is the domain name of the FTP server. Enter the Host Address (for example
ftp.example.com) (up to 64 characters) or the IP address (for example 192.23.56.189).
13
e Enter the Username that has been registered with the FTP server for the machine (up to 32 characters).
f Enter the Password for access to the FTP server (up to 32 characters).
g Enter the destination folder where your document will be stored on the FTP server (for example
brother\abc) (up to 60 characters).
h Choose the file name you want to use for the scanned document. You can choose from seven preset
and two user defined file names. The file name that will be used for your document will be the file name
you selected plus the last 6 digits of the flatbed/ADF scanner counter plus the file extension (For
example, Estimate_098765.pdf).
i Choose the scan quality from the pop-up menu. You can choose Color 100 dpi, Color 200 dpi,
Color 300 dpi, Color 600 dpi, Color Auto, B&W 100 dpi, B&W 200 dpi, B&W 300 dpi,
B&W 600 dpi, B&W Auto or User Select.
219
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scanning
j Choose the file type for the document from the pop-up menu. You can choose PDF, JPEG or
User Select for color documents, PDF, TIFF or User Select for B/W documents.
k Click Submit.
Scan to FTP using FTP Server Profiles
13
For MFC-J4510DW/J4710DW
13
a Load your document.
b Press
c Swipe left or right to display
d Press (to FTP).
(Scan).
(to FTP).
The icon moves to the middle and is highlighted in blue.
Press OK.
e Swipe up or down, or press a or b to choose one of the FTP server profiles listed.
Do one of the following:
If the Scan to FTP profile is not complete, the LCD prompts you to enter any missing information.
f Press Options.
Skip Blank Page , Remove Background Color and User Name as needed.
13
1
(For MFC-J4710DW)
h Press OK.
NOTE
If you want to save the profile as a shortcut, press Save as Shortcut.
i Press Start.
The LCD shows Connecting. When the connection to the FTP server is successful, the machine starts
scanning the document.
If you are using the scanner glass, the LCD displays Next page?. Press Yes or No.
For MFC-J4310DW/J4410DW/J4610DW
13
a Load your document.
220
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scanning
b Press Scan.
c Press s or t to choose Scan to FTP.
d Press Scan to FTP.
e Press s or t to choose one of the FTP server profiles listed.
If the Scan to FTP profile is not complete, the LCD prompts you to enter any missing information.
f Press Start.
The LCD shows Connecting. When the connection to the FTP server is successful, the machine starts
scanning the document.
If you are using the scanner glass, the LCD displays Next Page?. Press Yes or No.
Scan to Network (Windows®)
13
When you choose Scan to Network, you can scan documents directly to a shared folder on a CIFS server
located on your local network or the internet. Refer to the guide noted below for more information about CIFS
servers.
See Network User’s Guide.
The Scan to Network feature supports NTLMv2 authentication.
The details required to use Scan to Network can be entered by using Web Based Management to
preconfigure and store the details in a Scan to Network profile. The Scan to Network profile stores user
information and configuration settings for use on a network, or the internet.
NOTE
• Scan to Network is available when Scan to Network profiles are configured by using Web Based
Management.
• YOU MUST CONFIGURE THE SNTP PROTOCOL (NETWORK TIME SERVER), OR YOU MUST SET
THE DATE, TIME AND TIME ZONE CORRECTLY FOR AUTHENTICATION. FOR MORE
INFORMATION: See Network User’s Guide.
13
®
®
• We recommend Microsoft Internet Explorer 8.0/9.0. Please also make sure that JavaScript and Cookies
are always enabled in whichever browser you use. If a different web browser is used, make sure it is
compatible with HTTP 1.0 and HTTP 1.1.
To use Web Based Management, type http://xxx.xxx.xxx.xxx (where xxx.xxx.xxx.xxx is the IP
address of your machine) into your browser and then you can configure or change the settings in
Scan to FTP/Network in the Scan tab. You can configure up to five Scan to Network profiles and you can
choose what profile numbers (1 to 5) to use for Scan to Network settings in Scan to FTP/Network Profile.
In addition to the seven preset file names you can store two user defined file names that can be used for
creating a Scan to Network profile.
221
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scanning
Choose Scan to FTP/Network in Web Based Management. In Create a User Defined File Name, enter a
file name in one of the two user defined fields and click Submit. A maximum of 15 characters can be entered
in each of the user defined name fields.
NOTE
Do not use unsuitable characters in the file name (for example ?, /, \, or *). They may cause a sending error
when using Scan to Network.
Configuring the Scan to Network Default Settings
13
13
a Choose Network in Scan to FTP/Network from the Scan tab. Click Submit.
b Choose the Profile you want to configure in Scan to FTP/Network Profile.
222
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scanning
c Enter the name that you want to use for the Scan to Network profile. This name will be displayed on the
LCD of the machine and can be up to 15 characters.
d The Host Address is the domain name of the CIFS server. Enter the Host Address (for example
ftp.example.com) (up to 64 characters) or the IP address (for example 192.23.56.189).
e Enter the destination folder where your document will be stored on the CIFS server (for example
brother\abc) (up to 60 characters).
f Choose the file name you want to use for the scanned document. You can choose from seven preset
and two user defined file names. The file name that will be used for your document will be the file name
you selected plus the last 6 digits of the flatbed/ADF scanner counter plus the file extension (For
example, Estimate_098765.pdf).
g Choose the scan quality from the pop-up menu. You can choose Color 100 dpi, Color 200 dpi,
Color 300 dpi, Color 600 dpi, Color Auto, B&W 100 dpi, B&W 200 dpi, B&W 300 dpi,
B&W 600 dpi, B&W Auto or User Select.
h Choose the file type for the document from the pop-up menu. You can choose PDF, JPEG or
User Select for color documents, PDF, TIFF or User Select for B/W documents.
i If you want to protect the profile, choose On from Use PIN for Authentication and enter a 4-digit PIN
number in PIN Code.
j Enter the Username that has been registered with the CIFS server for the machine (up to 96 characters).
k Enter the Password for access to the CIFS server (up to 32 characters).
l Click Submit.
m Choose Date&Time from the General tab.
n Enter the date and time used on the CIFS server.
o Choose the time zone from the drop-down list.
13
p Choose the Auto Daylight option. If On is chosen, the date and time will be switched automatically when
daylight saving time starts and ends.
q Click Submit.
Scan to Network using Scan to Network Profiles
13
For MFC-J4510DW/J4710DW
13
a Load your document.
b Press
(Scan).
c Swipe left or right to display
(to Network).
223
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scanning
d Press
(to Network).
The icon moves to the middle and is highlighted in blue.
Press OK.
e Swipe up or down, or press a or b to choose one of the Network server profiles listed.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the profile on the LCD.
Press OK.
Do one of the following:
If the Scan to Network profile is not complete, the LCD prompts you to enter any missing information.
f Press Options.
Skip Blank Page , Remove Background Color and User Name as needed.
1
(For MFC-J4710DW)
h Press OK.
NOTE
If you want to save the settings as a shortcut, press Save as Shortcut.
i Press Start.
The LCD shows Connecting. When the connection to the network is successful, the machine starts
scanning the document.
If you are using the scanner glass, the LCD displays Next page?. Press Yes or No.
For MFC-J4310DW/J4410DW/J4610DW
a Load your document.
13
13
b Press Scan.
c Press s or t to choose Scan to Network.
d Press Scan to Network.
e Press s or t to choose one of the Scan to Network profiles listed.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the profile on the LCD.
Press OK.
If the Scan to Network profile is not complete, the LCD prompts you to enter any missing information.
224
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scanning
f Press Start.
The LCD shows Connecting. When the connection to the network is successful, the machine starts
scanning the document.
If you are using the scanner glass, the LCD displays Next Page?. Press Yes or No.
13
225
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scanning
Using Web Services for scanning on your network
®
®
(Windows Vista SP2 or later and Windows 7)
13
®
®
The Web Services protocol enables Windows Vista (SP2 or later) and Windows 7 users to scan using a
Brother machine on the network. You must install the driver via Web Services. Refer to the
Network User’s Guide noted below for information about installing Web Services.
See Network User’s Guide: Installing drivers used for printing and scanning via Web Services (Windows
®
®
Vista and Windows 7).
NOTE
• For network scanning, a maximum of 5 clients can be connected to one machine on the network. For
example, if 8 clients try to connect at a time, 3 of those clients will not be shown on the LCD.
• Five clients can be added to the list shown on the LCD. If five clients are already shown in the list, you can
add additional clients by first uninstalling Web Services from one or more of the clients shown on the LCD,
installing Web Services in the computer corresponding to the client that you want to add, and then turning
the Brother machine off and then on.
To uninstall Web Services from a computer, follow the instructions below.
®
a (Windows Vista )
Click the
button, then choose Network.
®
(Windows 7)
Click the
button, Control Panel, Network and Internet, and then
View network computers and devices.
b The machine’s Web Services Name will be shown with the printer icon. Right-click the machine you
want to uninstall.
c From the drop-down menu, click Uninstall.
• If your computer is protected by a firewall and is unable to network scan, you may need to configure the
13
• You can scan multiple documents from the ADF (automatic document feeder).
Using Web Services for scanning on your network from a computer
(Windows Vista® SP2 or later and Windows® 7)
13
Scanning using the Web Services protocol is also available from your computer.
a Load your document.
b Open your software application to scan the document.
226
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scanning
c Do one of the following:
®
Windows Photo Gallery
Click File, then Import from Camera or Scanner.
®
Windows Fax and Scan
Click File, New, then Scan.
d Choose the scanner you want to use.
e Do one of the following:
®
Windows Photo Gallery
Click Import.
®
Windows Fax and Scan
Click OK.
The Scan dialog box appears.
f Adjust the following settings, if needed, in the Scanner dialog box:
1
2
3
5
6
7
10
8
9
13
11
12
1 Scanner
2 Profile
3 Source
4 Paper size
5 Color format
6 File type
7 Resolution (Up to 300 dpi)
227
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scanning
8 Brightness
9 Contrast
10 Scanning area
11 Preview
12 Scan
g Click Scan on the Scan dialog box.
The machine starts scanning the document.
NOTE
If the LCD shows Out of Memory, decrease the Paper size setting or the Resolution setting. For
Using Web Services for scanning on your network from the Brother machine
(Windows Vista® SP2 or later and Windows® 7)
13
The menu that allows you to use Web Services for scanning is displayed on your Brother machine’s LCD if
you have installed the driver for scanning via Web Services. See Network User’s Guide: Installing drivers
®
®
used for printing and scanning via Web Services (Windows Vista and Windows 7).
NOTE
• Certain characters in the messages displayed on the LCD may be replaced with spaces when the
language settings of your OS and your Brother machine are different.
• If the LCD shows Out of Memory, decrease the Paper size setting or the Resolution setting. For
• You can scan multiple documents from the ADF (automatic document feeder).
For MFC-J4510DW/J4710DW
13
a Load your document.
13
b Press
c Swipe left or right to display
d Press (WS Scan).
(Scan).
(WS Scan).
The icon moves to the middle and is highlighted in blue.
Press OK.
e Swipe up or down, or press a or b to display the type of scan you want to do.
Press the type of scan.
f Swipe up or down, or press a or b to display the computer you want to send to.
Press the computer name.
228
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scanning
g Press Start.
The machine starts scanning the document.
For MFC-J4310DW/J4410DW/J4610DW
a Load your document.
b Press Scan.
13
c Press s or t to display Web Service.
Press Web Service.
d Press s or t to display the type of scan you want to do.
Press the type of scan.
e Press s or t to display the computer you want to send to.
Press the computer name.
f Press Start.
The machine starts scanning the document.
NOTE
If the LCD shows Out of Memory, decrease the Paper size setting or the Resolution setting.
Configuring settings for scanning
13
®
a (Windows Vista )
Click the
button, Control Panel, Hardware and Sound, then Scanners and Cameras.
®
(Windows 7)
Click the
button, All Programs, Brother, MFC-XXXX, Scanner Settings, then
Scanners and Cameras.
b Click your machine, and then click the Scan Profiles button.
The Scan Profiles dialog box will appear.
13
c Choose the scan profile you want to use. Make sure the scanner selected in Scanner is a Brother
machine that supports Web Services for scanning.
Click Set as Default.
d Click Edit. The Edit Default Profile dialog box will appear.
e Choose the Source, Paper size, Color format, File type, Resolution, Brightness and Contrast
settings.
f Click Save Profile. The settings will be applied when scanning using the Web Services protocol.
229
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scanning
NOTE
®
If you are requested to choose a software application to scan, choose Windows Fax and Scan or
®
Windows Photo Gallery from the list.
13
230
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A
C
R
ControlCenter2
Remote Setup
ControlCenter4
®
®
S
D
Scan
Drivers
Macintosh
Macintosh
Presto! PageManager ....................................... 157
TWAIN compliant .............................................. 145
Scan button
Brother printer driver ......................................... 129
Windows
Windows
WIA Compliant .................................................... 47
Status Monitor
F
FaceFilter Studio ....................................................... 31
FAX (PC-FAX)
Macintosh
Windows
®
®
P
®
PhotoCapture Center™
A
®
Print
Macintosh
Brother printer driver ......................................... 129
®
Windows
Brother printer driver ............................................. 6
231
Download from Www.Somanuals.com. All Manuals Search And Download.
Brother International Corporation
200 Crossing Boulevard P.O. Box 6911
Bridgewater, NJ 08807–0911 USA
Brother International Corporation (Canada) Ltd.
1 rue Hôtel de Ville,
Dollard-des-Ormeaux, QC, CANADA H9B 3H6
Visit us on the World Wide Web
This product is approved for use in the country of purchase only. Local Brother companies or their dealers will only support
machines purchased in their own countries.
Download from Www.Somanuals.com. All Manuals Search And Download.
|