Advanced User’s Guide
MFC-8950DW
MFC-8950DWT
Not all models are available in all countries.
Version 0
USA/CAN
Download from Www.Somanuals.com. All Manuals Search And Download.
Which Guide?
What's in it?
Where is it?
Web Connect Guide This Guide provides details about how to
configure and use your Brother machine to
scan, load and view images and files on
certain Web sites that provide these
services.
PDF file / Brother Solutions
Center
1
2
PDF printing is not supported on Windows® Phone.
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Memory storage.....................................................................................................1
Automatic Daylight Saving Time............................................................................3
Ecology features....................................................................................................3
Deep Sleep mode............................................................................................4
Quiet mode feature................................................................................................5
Setting the Dim Timer for the backlight ...........................................................5
Secure Function Lock 2.0......................................................................................7
Switching Users.............................................................................................12
Setting Lock.........................................................................................................13
Dial pad restriction.........................................................................................15
Additional sending options...................................................................................17
Contrast.........................................................................................................18
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional sending operations..............................................................................19
Sending a fax manually .................................................................................19
Dual access...................................................................................................20
Broadcasting..................................................................................................21
Real Time Transmission................................................................................22
Overseas Mode .............................................................................................23
Delayed Fax ..................................................................................................23
Delayed batch transmission ..........................................................................24
Destination Display........................................................................................28
Polled transmit...............................................................................................29
Paging ...........................................................................................................31
Fax Storage...................................................................................................32
Additional receiving operations............................................................................37
Setting the Fax Receive Stamp.....................................................................38
Setting the Print Density................................................................................39
Printing a fax from the memory .....................................................................39
Polling receive ...............................................................................................40
Telephone line services.......................................................................................42
For Fax/Tel mode only...................................................................................42
Special line considerations............................................................................42
Additional ways to store numbers........................................................................45
Deleting Group numbers ...............................................................................49
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
How to print a report......................................................................................51
Copy settings.......................................................................................................52
Stop copying..................................................................................................52
Improving copy quality...................................................................................52
Adjusting Brightness and Contrast ................................................................56
Sorting copies................................................................................................56
Making N in 1 copies (page layout) ...............................................................57
2 in 1 ID Copy................................................................................................59
Setting your favorites.....................................................................................60
Cleaning the corona wire...............................................................................65
Cleaning the paper pick-up rollers.................................................................71
Packing and shipping the machine......................................................................75
SO-DIMM Types............................................................................................79
v
Download from Www.Somanuals.com. All Manuals Search And Download.
General Setup
1
1
1
IMPORTANT NOTE
1
Volume settings
1
Most of the illustrations in this User’s
Ring volume
1
Guide show the MFC-8950DW.
You can choose a range of ring volume
levels, from Highto Off.
Memory storage
1
a Press Menu.
Your menu settings are stored permanently,
and in the event of a power failure will not be
lost. Temporary settings (for example,
Contrast and Overseas Mode) will be lost.
Also, during a power failure the machine will
retain the date and time and programed fax
timer jobs (for example, Delayed Fax) for
approximately 60 hours. Other fax jobs in the
machine's memory will not be lost.
b Press a or b to display
General Setup.
Press General Setup.
c Press a or b to display Volume.
Press Volume.
d Press Ring.
e Press Low, Med, Highor Off.
f Press Stop/Exit.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
Beeper volume
1
Speaker volume
1
When the beeper is on, the machine will beep
when you press a key, make a mistake, or
after you send or receive a fax. You can
choose a range of volume levels, from High
to Off.
You can choose a range of speaker volume
levels, from Highto Off.
a Press Menu.
b Press a or b to display
General Setup.
a Press Menu.
Press General Setup.
b Press a or b to display
General Setup.
c Press a or b to display Volume.
Press Volume.
Press General Setup.
d Press Speaker.
c Press a or b to display Volume.
Press Volume.
e Press Low, Med, Highor Off.
f Press Stop/Exit.
You can also temporarily adjust the speaker
volume by pressing Hook.
d Press Beeper.
e Press Low, Med, Highor Off.
f Press Stop/Exit.
a Press Hook on the control panel.
b Press d or c on the Touchscreen to
display Volume.
c Press Volume.
d Press
to decrease or
to
increase the speaker volume level.
Each button press changes the volume
to the next setting.
e Press Hook on the control panel.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
General Setup
Automatic Daylight
Saving Time
Ecology features
1
1
Toner Save
1
1
You can set the machine to change
automatically for Daylight Saving Time. It will
set itself forward one hour in the Spring, and
back one hour in the Fall.
You can save toner using this feature. When
you set Toner Save to On, print appears
lighter. The default setting is Off.
a Press Menu.
a Press Menu.
b Press a or b to display
Initial Setup.
b Press a or b to display
General Setup.
Press Initial Setup.
Press General Setup.
c Press a or b to display Date&Time.
Press Date&Time.
c Press a or b to display Ecology.
Press Ecology.
d Press Auto Daylight.
e Press Onor Off.
d Press Toner Save.
e Press Onor Off.
f Press Stop/Exit.
f Press Stop/Exit.
Note
We do not recommend Toner Save for
printing Photo or Gray Scale images.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
Sleep Time
1
Deep Sleep mode
1
The Sleep mode setting can reduce power
consumption. When the machine is in Sleep
mode (Power Save mode) it acts as though it
is turned off. The machine will wake up and
start printing when it receives a print job.
If the machine is in Sleep mode and does not
receive any jobs for a certain length of time,
the machine will go into Deep Sleep mode
automatically. Deep Sleep mode uses less
power than Sleep mode. The machine will
wake up when it receives a fax or a print job.
You can choose how long the machine must
be idle before it goes into Sleep mode. The
timer will restart if any operation is carried out
on the machine, such as receiving a fax or a
print job. The default setting is 3 minutes.
When the machine is in Deep Sleep mode,
the LCD backlight is Off and the Home key is
dimmed.
If a wireless network is enabled, the machine
will not enter Deep Sleep mode.
When the machine goes into Sleep mode, the
LCD backlight turns off.
For the procedure to disable the wireless
network uu Network User's Guide: Control
panel setup
a Press Menu.
b Press a or b to display
General Setup.
If the machine has secure print data it will not
enter Deep Sleep mode.
Press General Setup.
c Press a or b to display Ecology.
Press Ecology.
d Press Sleep Time.
e Using the dial pad on the Touchscreen,
enter the length of time (0-90 minutes)
the machine will remain idle before
entering Sleep mode.
Press OK.
f Press Stop/Exit.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
General Setup
Quiet mode feature
1
LCD screen
1
Quiet mode
1
Setting the backlight
brightness
1
1
The Quiet mode setting can reduce noise
while printing. When Quiet Mode is turned On,
the print speed becomes slower. The default
setting is Off.
You can adjust the brightness of the LCD
backlight. If you are having difficulty reading
the LCD, try changing the brightness setting.
a Press Menu.
a Press Menu.
b Press a or b to display
General Setup.
b Press a or b to display
General Setup.
Press General Setup.
Press General Setup.
c Press a or b to display Quiet Mode.
Press Quiet Mode.
c Press a or b to display LCD Settings.
Press LCD Settings.
d Press Onor Off.
e Press Stop/Exit.
d Press Backlight.
e Press Light, Medor Dark.
f Press Stop/Exit.
Setting the Dim Timer for the
backlight
1
You can set how long the LCD backlight stays
on after you go back to the Ready screen.
a Press Menu.
b Press a or b to display
General Setup.
Press General Setup.
c Press a or b to display LCD Settings.
Press LCD Settings.
d Press Dim Timer.
e Press 10 Secs, 20 Secs, 30 Secsor
Off.
f Press Stop/Exit.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
Changing the prefix number
1
Dial Prefix
1
The Dial Prefix setting will automatically dial a
predefined number before every fax number
you dial. For example: If your telephone
system requires a 9 to dial an outside number
use this setting to automatically dial 9 for
every fax you send.
a Press Menu.
b Press a or b to display
Initial Setup.
Press Initial Setup.
c Press a or b to display Dial Prefix.
Press Dial Prefix.
Setting up the prefix number
1
d Press On(or Off).
You can turn off the prefix number by
pressing Off. The prefix number will
remain off until you press On.
a Press Menu.
b Press a or b to display
Initial Setup.
e Press Dial Prefix.
Press Initial Setup.
f Do one of the following using the buttons
c Press a or b to display Dial Prefix.
Press Dial Prefix.
on the Touchscreen.
To change the prefix number, press
d or c to position the cursor under the
digit to be deleted and press the
d Do one of the following:
If you want to set the dial prefix
feature to on, press On. Go to
Back Space button
the correct digit.
. Then press
If you want to set the dial prefix
feature to off, press Off. Go to
Repeat until the prefix number is
correct, and then press OK.
To exit without making a change,
press OK.
e Press Dial Prefix.
Note
f Enter the prefix number (up to 5 digits)
by pressing the buttons on the
Touchscreen.
• You can use the numbers and symbols 0
to 9, #, and l. (You cannot use ! with any
other numbers or symbols.)
Press OK.
• If your telephone system requires a time
break recall (hookflash), press !on the
Touchscreen.
Note
• You can use the numbers and symbols 0
to 9, #, and l. (You cannot use ! with any
other numbers or symbols.)
• (Canada only) If pulse dialing mode is on,
# and l are not available to use.
• If your telephone system requires a time
break recall (hookflash), press !on the
Touchscreen.
g Press Stop/Exit.
• (Canada only) If pulse dialing mode is on,
# and l are not available to use.
g Press Stop/Exit.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Security features
2
2
Secure Function Lock 2.0
2
Note
• Secure Function Lock can be set manually
at the control panel, or by using Web
Based Management or BRAdmin
Secure Function Lock lets you restrict Public
access to the following machine functions:
2
®
Fax Tx
Fax Rx
Copy
Professional 3 (Windows only). We
recommend using Web Based
Management or BRAdmin Professional 3
®
(Windows only) to configure this feature.
(See Network User's Guide.)
Scan
• Only administrators can set limitations
and make changes for each user.
Direct Print
Print
• Polling Receive is enabled only when both
Fax Tx and Fax Rx are enabled.
Page Limit
Web Connect
1
Scan includes scan jobs via Brother iPrint&Scan.
2
Print includes print jobs via Google Cloud Print and
Brother iPrint&Scan.
3
Page Limit is configured using Web Based
Management.
This feature also prevents users from
changing the default settings of the machine
by limiting access to the Menu settings.
Before using the security features you must
first enter an administrator password.
Access to restricted operations can be
enabled by creating a restricted user.
Restricted users must enter a password to
use the machine.
Make a careful note of your password. If you
forget it, you will have to reset the password
stored in the machine. For information about
how to reset the password call Brother
Customer Service.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Changing the password
2
Setting and changing the
Administrator Password
2
a Press Menu.
b Press a or b to display
General Setup.
Setting up the password
2
Press General Setup.
The password you set in these steps is for the
administrator. This password is used to set
up users and to turn the Secure Function
Lock on or off. (See Setting up and changing
c Press a or b to display Security.
Press Security.
d Press Function Lock.
e Press Set Password.
Note
f Enter the registered four-digit password
by pressing the buttons on the
Touchscreen.
Make a careful note of the administrator
password. If you enter the wrong
password, the LCD will show
Press OK.
Wrong Password. Re-enter the correct
password. If you forget it, please call
Brother Customer Service.
g Enter a four-digit number for the new
password by pressing the buttons on the
Touchscreen.
a Press Menu.
Press OK.
b Press a or b to display
General Setup.
h Re-enter the password when the LCD
shows Verify:.
Press General Setup.
Press OK.
c Press a or b to display Security.
Press Security.
i Press Stop/Exit.
d Press Function Lock.
e Enter a four-digit number for the
password by pressing the buttons on the
Touchscreen.
Press OK.
f Re-enter the password when the LCD
shows Verify:.
Press OK.
g Press Stop/Exit.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Security features
Setting up and changing the
Public user mode
Setting up and changing
restricted users
2
2
Public user mode restricts the functions that
are available for Public users. Public users do
not need to enter a password to access the
features made available through this setting.
You can set up one Public user.
You can set up users with a password and
restrict the functions that are available to
them. You can set up more advanced
restrictions, such as by page count or PC
user login name, through Web Based
Management or BRAdmin Professional 3
2
a Press Menu.
®
(Windows only). (See Network User's
Guide.) You can set up to 25 restricted users.
b Press a or b to display
General Setup.
Setting up restricted users
2
Press General Setup.
a Press Menu.
c Press a or b to display Security.
Press Security.
b Press a or b to display
General Setup.
d Press Function Lock.
e Press Setup ID.
Press General Setup.
c Press a or b to display Security.
Press Security.
f Enter the administrator password by
pressing the buttons on the
Touchscreen.
d Press Function Lock.
e Press Setup ID.
Press OK.
g Press a or b to display Public.
Press Public.
f Enter the four-digit administrator
password by pressing the buttons on the
Touchscreen.
h Do one of the following:
Press OK.
To set up the Public user, press
Enableor Disablefor each
operation, as follows: Press Fax Tx.
Then press Enableor Disable.
After you have set Fax Tx, repeat
these steps for Fax Rx, Copy,
Scan, Direct Print, Printand
Web Connect.
g Press a or b to display UserXX.
Press UserXX.
h Enter the user name by pressing the
buttons on the Touchscreen. (See Basic
User's Guide: Entering text.)
Press OK.
To change the Public user settings,
pressa or b to display the setting you
want to change. Press the setting
and press Enableor Disable.
Repeat this step until you finish
changing settings.
i Enter a four-digit user password by
pressing the buttons on the
Touchscreen.
Press OK.
i Press Stop/Exit.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
j To set up a restricted user, press
Enableor Disablefor each operation,
as follows: Press Fax Tx. Then press
Enableor Disable. After you have set
Fax Tx, repeat these steps for
i To change the password, enter a new
four-digit user password by pressing the
buttons on the Touchscreen.
Press OK.
j To change a restricted user's settings,
press a or b to display the setting you
want to change. Press the setting and
then press Enableor Disable.
Repeat this step until you are finished
making changes.
Fax Rx, Copy, Scan, Direct Print,
Printand Web Connect.
k Press
entering each additional user and
password.
l Press Stop/Exit.
k Press Stop/Exit.
Note
Note
You cannot use the same name as
another user's name.
You cannot use the same name as
another user's name.
Changing user name, password or
settings for restricted users
Reset existing restricted users
2
2
a Press Menu.
a Press Menu.
b Press a or b to display
General Setup.
b Press a or b to display
General Setup.
Press General Setup.
Press General Setup.
c Press a or b to display Security.
Press Security.
c Press a or b to display Security.
Press Security.
d Press Function Lock.
e Press Setup ID.
d Press Function Lock.
e Press Setup ID.
f Enter the four-digit administrator
password by pressing the buttons on the
Touchscreen.
f Enter the four-digit administrator
password by pressing the buttons on the
Touchscreen.
Press OK.
Press OK.
g Press a or b to display the existing
restricted user you want to reset.
Press the user name.
g Press a or b to display the existing
restricted user you want to change.
Press the user name.
h Press Reset.
h Press Change.
i Press Yesto reset the existing restricted
To change the user name, enter a new
user name by pressing the buttons on
the Touchscreen. (See Basic User's
Guide: Entering text.)
user.
j Press Stop/Exit.
Press OK.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Security features
Turning Secure Function Lock off
Turning Secure Function
Lock on/off
2
a Press Publicor xxxxx(where xxxxx is
the user’s name).
Turning Secure Function Lock on
b Press Lock OnOff.
a Press Menu.
2
c Enter the registered four-digit
administrator password by pressing the
buttons on the Touchscreen.
Press OK.
b Press a or b to display
General Setup.
Press General Setup.
c Press a or b to display Security.
Press Security.
Note
If you enter the wrong password, the LCD
will show Wrong Password. Re-enter
the correct password.
d Press Function Lock.
e Press Lock OffOn.
f Enter the registered four-digit
administrator password by pressing the
buttons on the Touchscreen.
Press OK.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Changing to the Public mode
Switching Users
2
a Press xxxxx. (where xxxxx is the user’s
This setting allows you to switch between
registered restricted users or Public mode
when Secure Function Lock is turned on.
name.)
b Press Go to Public.
Changing to the restricted user mode
Note
a Press Publicor xxxxx(where xxxxx is
the user’s name).
• After a restricted user has finished using
the machine, it will return to the Public
setting within one minute.
Press Change User.
• If the function you want to use is restricted
for all users, Access Deniedwill appear
on the LCD and the machine will go back
to the Ready mode. You cannot access
the function you want to use. Contact your
administrator to check your Secure
Function Lock Settings.
b Press a or b to display your user name.
c Press your user name.
d Enter the registered four-digit user
password by pressing the buttons on the
Touchscreen.
Press OK.
Note
• If the current ID is restricted for the
function you want to use,
Access Deniedwill appear on the LCD.
• If your ID has set page limit restrictions
and already reached the maximum
number of pages, the LCD will show
Limit Exceededwhen you print data.
Contact your administrator to check your
Secure Function Lock Settings.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Security features
Setting up the password
2
Setting Lock
2
Setting Lock lets you set a password to stop
other people from accidentally changing your
machine settings.
a Press Menu.
b Press a or b to display
General Setup.
Make a careful note of your password. If you
forget it, you will have to reset the passwords
stored in the machine. Please call your
administrator or Brother Customer Service.
2
Press General Setup.
c Press a or b to display Security.
Press Security.
While Setting Lock is On, you cannot access
the Menubutton or edit the numbers you
stored in the Address Book. You can still use
the Address Bookbutton to send faxes and
E-mail messages to previously stored
numbers.
d Press Setting Lock.
e Enter a four-digit number for the
password by pressing the buttons on the
Touchscreen.
Press OK.
Machine settings cannot be changed through
the Remote Setup utility while Setting Lock
is On.
f Re-enter the password when the LCD
shows Verify:.
Press OK.
g Press Stop/Exit.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Changing your Setting Lock
password
Turning Setting Lock on/off
2
2
If you enter the wrong password when
following the instructions below, the LCD will
show Wrong Password. Re-enter the
correct password.
a Press Menu.
b Press a or b to display
General Setup.
Turning Setting Lock on
Press General Setup.
a Press Menu.
c Press a or b to display Security.
Press Security.
b Press a or b to display
General Setup.
Press General Setup.
d Press Setting Lock.
e Press Set Password.
c Press a or b to display Security.
Press Security.
f Enter the registered four-digit password
by pressing the buttons on the
Touchscreen.
d Press Setting Lock.
e Press Lock OffOn.
Press OK.
f Enter the registered four-digit
administrator password by pressing the
buttons on the Touchscreen.
Press OK.
g Enter a four-digit number for the new
password by pressing the buttons on the
Touchscreen.
Press OK.
The LCD will show locks on the Setting
Lock and Menu buttons.
h Re-enter the password when the LCD
shows Verify:.
Press OK.
01
01.01.2012 11:00$0
COPY
i Press Stop/Exit.
Copy
Fax
Scan
Web
Settinng Lock
Menu
Turning Setting Lock off
a Press Setting Lockon the LCD.
b Enter the registered four-digit
administrator password by pressing the
buttons on the Touchscreen.
Press OK.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Security features
One Touch restriction
2
Restricting dialing
2
This feature is to prevent users from sending
a fax or call to a wrong number by mistake.
You can set the machine to restrict dialing
when you use the dial pad, One Touch,
Speed Dial and LDAP search.
a Press Menu.
b Press a or b to display Fax.
Press Fax.
2
c Press a or b to display
Dial Restrict..
If you choose Off, the machine does not
restrict the dialing method.
Press Dial Restrict..
If you choose Enter # twice, the machine
will prompt you to re-enter the number, and
then if you re-enter the same number
correctly, the machine will start dialing. If you
re-enter the wrong number, the LCD will
show an error message.
d Press One Touch Dial.
e Press Enter # twice, Onor Off.
f Press Stop/Exit.
If you choose On, the machine will restrict all
fax sending and outbound calls for that
dialing method.
Speed Dial restriction
2
a Press Menu.
Dial pad restriction
2
b Press a or b to display Fax.
Press Fax.
a Press Menu.
c Press a or b to display
Dial Restrict..
b Press a or b to display Fax.
Press Fax.
Press Dial Restrict..
d Press Speed Dial.
c Press a or b to display
Dial Restrict..
e Press Enter # twice, Onor Off.
f Press Stop/Exit.
Press Dial Restrict..
d Press Dial Pad.
e Press Enter # twice, Onor Off.
f Press Stop/Exit.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
LDAP server restriction
2
a Press Menu.
b Press a or b to display Fax.
Press Fax.
c Press a or b to display
Dial Restrict..
Press Dial Restrict..
d Press LDAP Server.
e Press Enter # twice, Onor Off.
f Press Stop/Exit.
Note
• The Enter # twicesetting will not work
if you use an external phone or press
Hook before entering the number. You will
not be asked to re-enter the number.
• You can not restrict dialing when you use
Redial/Pause.
• If you chose Onor Enter # twice, you
cannot use the Broadcasting feature and
cannot combine quick dial numbers when
dialing.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending a fax
3
3
c Do one of the following:
Additional sending
options
3
settings.
If you are finished choosing settings,
go to the next step for sending your
fax.
Sending faxes using multiple
settings
3
3
Note
Before you send a fax, you can change any
combination of these settings:
• Most settings are temporary and the
machine returns to its default settings after
you send a fax.
Duplex Fax
Contrast
• You can save some of the settings you
use most often by setting them as the
default. These settings will stay until you
change them again. (See Setting your
Fax Resolution
Real Time TX
Overseas Mode
Delayed Fax
Batch TX
Coverpage Message
Coverpage Setup
a Press Faxon the Touchscreen.
Fax
The LCD shows:
Fax
Fax
Resolution
Duplex Fax
Address Book
Off
Standard
Fax
b Press d or c to display a setting you
want to change and press the setting,
then press the option you want.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
Changing a 2-sided fax layout
3
Contrast
3
You need to choose the duplex scanning
format before you send a 2-sided fax. The
format you choose will depend on the layout
of your 2-sided document.
For most documents the default setting of
Autowill give the best results.
Autoautomatically chooses the suitable
contrast for your document.
If your document is very light or very dark,
changing the contrast may improve the
quality of the fax.
a Press Fax.
b Press d or c to display Duplex Fax.
Press Duplex Fax.
Use Darkto make the faxed document
lighter.
c Do one of the following:
Use Lightto make the faxed document
darker.
If your document is flipped on the
Long edge, press
DuplexScan : LongEdge.
a Press Fax.
b Press d or c to display Contrast.
Press Contrast.
Long edge
Portrait
Landscape
c Press Auto, Lightor Dark.
Note
Even if you choose Lightor Dark, the
machine will send the fax using the Auto
setting if you choose Photoas the Fax
Resolution.
If your document is flipped on the
Short edge, press
DuplexScan : ShortEdge.
Short edge
Portrait
Landscape
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending a fax
Changing Fax Resolution
3
Additional sending
operations
3
The quality of a fax can be improved by
changing the Fax Resolution. Resolution can
be changed for the next fax.
Sending a fax manually
3
a Press Fax.
Manual transmission
3
b Press d or c to display
Fax Resolution.
3
Manual transmission lets you hear the
dialing, ringing and fax-receiving tones while
sending a fax.
Press Fax Resolution.
c Press Standard, Fine, S.Fineor
Photo.
a Press Fax.
Note
b Load your document.
You can choose four different resolution
settings.
c Press Hook and listen for a dial tone.
d Dial the fax number you want to call.
Black & white
Standard
Suitable for most typed
documents.
e When you hear the fax tones, press
Start.
Fine
Good for small print and
transmits a little slower than
Standard resolution.
If you are using the scanner glass,
press Send.
S.Fine
Photo
Good for small print or artwork
and transmits slower than Fine
resolution.
Use when the document has
varying shades of grey or is a
photograph. This has the
slowest transmission time.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
Sending a fax at the end of a
conversation
Dual access
3
3
You can dial a number and start scanning the
fax into memory—even when the machine is
sending from memory, receiving faxes or
printing PC data. The LCD will show the new
job number.
At the end of a conversation you can send a
fax to the other party before you both hang
up.
a Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
The number of pages you can scan into the
memory will vary depending on the data that
is printed on them.
b Load your document.
c Press Start.
Note
If you get an Out of Memorymessage
while scanning the first page of a fax,
press Stop/Exit to cancel scanning. If you
get an Out of Memorymessage while
scanning a subsequent page, you can
press Start to send the pages scanned so
far, or press Stop/Exit to cancel the
operation.
If you are using the scanner glass,
press Send.
d Replace the handset of an external
telephone.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending a fax
How to broadcast a fax
Note
3
Broadcasting
3
Broadcasting lets you send the same fax
message to more than one fax number. You
can include Groups, One Touch, Speed Dial
numbers and up to 50 manually dialed
numbers in the same broadcast.
To help you choose numbers easily, press
(Search).
a Press Fax.
You can broadcast up to 382 different
numbers. This will depend on how many
Groups, access codes or credit card numbers
you have saved, and how many delayed or
stored faxes are in the memory.
b Load your document.
3
c Press d or c to display Broadcasting.
Press Broadcasting.
d You can add numbers to the broadcast
Before you begin the broadcast
3
in the following ways:
One Touch and Speed Dial numbers must be
stored in the machine's memory before they
can be used in a broadcast. (See Basic
User's Guide: Storing One Touch Dial
Press Manualand enter a number
by pressing the buttons on the
Touchscreen. (See Basic User's
Guide: How to dial.)
numbers and Storing Speed Dial numbers.)
Press OK.
Group numbers must also be stored in the
machine's memory before they can be used
in a broadcast. Group numbers include many
previously stored One Touch Dial and Speed
Dial numbers for easier dialing. (See Setting
Press Address Book. Press
to search by Alphabetical Order or
Numerical Order. Put a check in the
check box beside each number you
want to include in the broadcast.
Press OK.
Note
One Touch Dial numbers begin with l.
Speed Dial numbers begin with #.
e After you have entered all the fax
f Press Start.
After the broadcast is finished the machine
will print a broadcast report to let you know
the results.
Note
The scan profile of the One Touch,
Speed Dial or Group number you chose
first will be applied to the broadcast.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
Canceling a Broadcast in progress
3
Real Time Transmission
3
While broadcasting you can cancel the fax
currently being sent or the whole broadcast
job.
When you are sending a fax, the machine will
scan the documents into the memory before
sending it. Then, as soon as the telephone
line is free, the machine will start dialing and
sending.
a Press Stop/Exit.
b Do one of the following:
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can
turn on Real Time TX.
To cancel the entire broadcast, press
To cancel the current job, press the
button that displays the number
Note
• If the memory is full and you are sending a
fax from the ADF, the machine will send
the document in real time (even if
Real Time TX is set to Off). If the memory
is full, faxes from the scanner glass cannot
be sent until you clear some of the
memory.
To exit without canceling, press
Stop/Exit.
c When the LCD asks if you want to
cancel the entire broadcast, do one of
the following:
Press Yesto confirm.
• In Real Time Transmission, the automatic
redial feature does not work when using
the scanner glass.
To exit without canceling, press No
or Stop/Exit.
d Do one of the following:
a Press Fax.
To cancel the current job, press Yes.
b Load your document.
To exit without canceling, press No
or Stop/Exit.
c Press d or c to display Real Time TX.
Press Real Time TX.
d Press On.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending a fax
Overseas Mode
3
Delayed Fax
3
If you are having difficulty sending a fax
overseas due to a bad connection, then
turning on Overseas Mode may help.
You can store up to 50 faxes in the memory
to be sent within a twenty-four hour period.
a Press Fax.
This is a temporary setting, and will only be
active for your next fax.
b Load your document.
a Press Fax.
3
c Press d or c to display Delayed Fax.
Press Delayed Fax.
b Load your document.
d Press On.
c Press d or c to display
Overseas Mode.
e To enter the time you want the fax to be
Press Overseas Mode.
sent, do one of the following:
If you have set 12h Clockas the
format in the Date&Timesetting,
enter the time (in 12-hour format) by
pressing the buttons on the
Touchscreen, and then press AMor
PM.
d Press On.
Press OK.
If you have set 24h Clockin the
Date&Timesetting, enter the time
(in 24-hour format) by pressing the
buttons on the Touchscreen.
Press OK.
(For example, enter 19:45 for 7:45
PM.)
Note
The number of pages you can scan into
the memory depends on the amount of
data printed on each page.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
Delayed batch transmission
3
Checking and canceling
waiting jobs
3
Before sending the delayed faxes, your
machine will help you economize by sorting
all the faxes in the memory by destination and
scheduled time.
Check which jobs are still waiting in the
memory to be sent. If there are no jobs, the
LCD will show No Jobs Waiting. You can
cancel a fax job that is stored and waiting in
the memory.
All delayed faxes that are scheduled to be
sent at the same time to the same fax number
will be sent as one fax to save transmission
time.
a Press Menu.
b Press a or b to display Fax.
Press Fax.
a Press Menu.
b Press a or b to display Fax.
Press Fax.
c Press a or b to display
Remaining Jobs.
Press Remaining Jobs.
Jobs that are waiting will appear on the
LCD.
c Press a or b to display Setup Send.
Press Setup Send.
d Press Batch TX.
e Press On(or Off).
f Press Stop/Exit.
d Press a or b to scroll through the waiting
jobs and press the job you want to
cancel. Press OK.
e Do one of the following:
To cancel, press Yes. If you want to
To exit without canceling, press No.
f When you have finished canceling jobs,
press Stop/Exit.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending a fax
Setting your changes as the
new default
Restoring all fax settings to
the factory settings
3
3
You can save the fax settings for
Fax Resolution, Contrast,
You can restore all the fax settings you have
changed to the factory settings. These
Real Time TX, Glass ScanSizeand
Coverpage Setupyou use most often by
setting them as the default. These settings
will stay until you change them again.
settings will stay until you change them again.
a Press Fax.
3
b Press d or c to display
Factory Reset.
a Press Fax.
Press Factory Reset.
b Press d or c to choose the setting you
want to change, and then press the new
option.
c Press Yes.
d Press Stop/Exit.
Repeat this step for each setting you
want to change.
c After changing the last setting,
press d or c to display Set New
Default.
Press Set New Default.
d Press Yes.
e Press Stop/Exit.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
Composing your own comments
3
Electronic cover page
3
You can set up two comments of your own.
This feature will not work unless you have
programmed your Station ID. (See Quick
Setup Guide.)
a Press Menu.
b Press a or b to display Fax.
Press Fax.
You can automatically send a cover page
with every fax. Your cover page includes your
Station ID, a comment, and the name (or
number) stored in the One Touch or Speed
Dial memory.
c Press a or b to display Setup Send.
Press Setup Send.
d Press Coverpage Setting.
e Press Coverpage Message.
By choosing Onyou can also display the
number of pages on the cover page.
You can choose one of the following preset
comments.
f Press 5or 6to store your own comment.
1.Comment Off
2.Please Call
3.Urgent
g Enter your own comment by pressing
the buttons on the Touchscreen.
Press OK.
Press
to choose numbers, letters or
4.Confidential
special characters. (See Basic User's
Instead of using one of the preset comments,
you can enter two personal messages of your
own, up to 27 characters long. (See Basic
User's Guide: Entering text.)
Guide: Entering text.)
h Press Stop/Exit.
5.(User Defined)
6.(User Defined)
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending a fax
Send a cover page for all faxes
3
Using a printed cover page
3
You can set the machine to send a cover
page whenever you send a fax.
If you want to use a printed cover page that
you can write on, you can print the sample
page and attach it to your fax.
a Press Fax.
a Press Menu.
b Press d or c to display
Coverpage Setup.
b Press a or b to display Fax.
Press Fax.
Press Coverpage Setup.
3
c Press On(or Off).
c Press a or b to display Setup Send.
Press Setup Send.
d Press the comment you want to add.
d Press Coverpage Setting.
e Press Print Sample.
f Press Start.
e Enter two digits to show the number of
pages you are sending.
Press OK.
For example, enter 02for 2 pages or
00to leave the number of pages blank.
If you make a mistake, press Clearto
back up and re-enter the number of
pages.
g After the machine prints a copy of your
cover page, press Stop/Exit.
f Press d or c to display
Set New Default.
Press Set New Default.
g Press Yes.
h Press Stop/Exit.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
Destination Display
3
The machine displays the information
registered in the address book or the number
you dialed to send a fax. You can set the
machine to hide the destination information
on the LCD.
a Press Menu.
b Press a or b to display Fax.
Press Fax.
c Press a or b to display Setup Send.
Press Setup Send.
d Press Destination.
e Press Hidden(or Display).
f Press Stop/Exit.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending a fax
Polling overview
3
Note
The document will be stored and can be
retrieved from any other fax machine until
you delete the fax from memory.
Polling lets you set up your machine so other
people can receive faxes from you, but they
pay for the call. It also lets you call somebody
else’s fax machine and receive a fax from it,
so you pay for the call. The polling feature
needs to be set up on both machines for this
To delete the fax from memory, press
Menu, Fax, Remaining Jobs. (See
to work. Not all fax machines support polling.
3
Polled transmit
3
Polled transmit lets you set up your machine
to wait with a document so another fax
machine can call and retrieve it.
Setup for polled transmit
a Press Fax.
3
b Load your document.
c Press d or c to display Polled TX.
Press Polled TX.
d Press On.
e Press Start.
f If you are using the scanner glass, the
LCD will prompt you to choose one of
the following options:
Press Yesto scan another page.
Press Noor Start if you are finished
scanning pages.
g Place the next page on the scanner
glass and press Start. Repeat
want to scan from the scanner glass.
h Your machine will automatically send
the fax when it is polled.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving a fax
4
4
Remote Fax Options
4
Note
• You can enter an E-mail address by
Remote Fax Options let you receive faxes
while you are away from the machine.
pressing
on the Touchscreen.
• You can display your stored numbers and
E-mail addresses in alphabetical order by
You can use only one Remote Fax Option at
a time.
pressing
on the Touchscreen.
• Depending on the E-mail address you
choose, you will be asked for the File
Type. Choose TIFFor PDFand go to
Fax Forwarding
4
The Fax Forwarding feature lets you
automatically forward your received faxes to
another machine.
• If you choose a Group number from the
Address Book, the faxes will be forwarded
to multiple fax numbers.
a Press Menu.
b Press a or b to display Fax.
Press Fax.
g Press Backup Print:Onor
Backup Print:Off.
c Press a or b to display
Setup Receive.
Important
If you choose Backup Print On, the
machine will also print received faxes at
your machine so you will have a copy.
This is a safety feature in case there is a
power failure before the fax is forwarded
or a problem at the receiving machine.
Press Setup Receive.
d Press a or b to display
Forward/Page/Store.
Press Forward/Page/Store.
e Press Fax Forward.
f Do one of the following:
h Press Stop/Exit.
Press Manualto enter the
forwarding fax number (up to 20
characters) or E-mail address (up to
60 characters) using the buttons on
the Touchscreen. (See Basic User's
Guide: Entering text.)
Press OK.
Press Address Book.
Press a or b to scroll until you find the
fax number or E-mail address you
want your faxes to be forwarded to.
Press the fax number or E-mail
address you want to use.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving a fax
h Press Stop/Exit.
Paging
4
Note
When Paging is chosen, the machine dials
the cell phone or pager number you
programmed. This activates your cell phone
or pager so you will know that you have a fax
message in the machine’s memory.
• If you have set Paging, a backup copy will
automatically be printed at the machine.
• You cannot change a pager, cell phone or
PIN number remotely.
a Press Menu.
b Press a or b to display Fax.
Press Fax.
4
c Press a or b to display
Setup Receive.
Press Setup Receive.
d Press a or b to display
Forward/Page/Store.
Press Forward/Page/Store.
e Press Paging.
f Enter your cell phone or pager number
followed by # # (up to 20 digits) by
pressing the buttons on the
Touchscreen.
Press OK.
Do not include the area code if it is the
same as that of your machine.
For example, press
18005551234##.
g Do one of the following:
If your pager needs a PIN, enter the
PIN, press #, press Pause, enter
your fax number followed by ##.
Press OK. (For example, press:
12345#Pause180055567
89##)
If you do not need a PIN, press OK.
If you are programming a cell phone
number, press OK.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
Fax Storage
4
Changing Remote Fax
Options
4
The Fax Storage feature lets you store your
received faxes in the machine’s memory. You
can retrieve stored fax messages from a fax
machine at another location using the remote
retrieval commands. (See Retrieving fax
automatically print a copy of the stored fax.
If received faxes are left in your machine’s
memory when you change to another
Remote Fax Option, the LCD will ask you one
of the following questions:
Erase All Fax?
Print All Fax?
a Press Menu.
• If you press Yes, faxes in the memory
will be erased or printed before the
setting changes. If a backup copy has
already been printed the faxes will not
be printed again.
b Press a or b to display Fax.
Press Fax.
c Press a or b to display
Setup Receive.
• If you press No, faxes in the memory
will not be erased or printed and the
setting will be unchanged.
Press Setup Receive.
d Press a or b to display
Forward/Page/Store.
If received faxes are left in the machine’s
memory when you change to
Press Forward/Page/Store.
PC Fax Receivefrom another remote fax
option (Fax Forward, Pagingor
Fax Storage), the LCD will ask you the
following question:
e Press Fax Storage.
f Press Stop/Exit.
Send Fax to PC?
• If you press Yes, faxes in the memory
will be sent to your PC before the
setting changes. Faxes in the memory
will be sent to your PC when the
PC-Fax Receive icon is active on your
PC. (See Software User's Guide.)
• If you press No, faxes in the memory
will not be erased or transferred to your
PC and the setting will be unchanged.
Backup Print:On
Backup Print:Off
Press Backup Print:Onor
Backup Print:Off.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving a fax
Remote retrieval
4
Important
If you choose Backup Print On, the
The remote retrieval feature lets you retrieve
your stored fax messages when you are not
at the machine. You can call your machine
from any touch tone telephone or fax
machine, then use the Remote Access Code
to retrieve your messages.
machine will also print received faxes at
your machine so you will have a copy.
This is a safety feature in case there is a
power failure before the fax is forwarded
or a problem at the receiving machine.
Turning off Remote Fax Options
4
Setting a Remote Access Code
4
The Remote Access Code feature lets you
access the remote retrieval features when
you are away from your machine. Before you
use the remote access and retrieval features,
you have to set up your own code. The
default code is an inactive code: – – –l.
a Press Menu.
4
b Press a or b to display Fax.
Press Fax.
c Press a or b to display
Setup Receive.
a Press Menu.
Press Setup Receive.
b Press a or b to display Fax.
Press Fax.
d Press a or b to display
Forward/Page/Store.
Press Forward/Page/Store.
c Press a or b to display
Remote Access.
e Press Off.
Press Remote Access.
Note
d Enter a three-digit code using the
numbers 0– 9, l or #.
Press OK.
The LCD will give you more options if
there are received faxes still in your
machine’s memory. (See Changing
e Press Stop/Exit.
f Press Stop/Exit.
Note
DO NOT use the same code used for your
Fax Receive Code (l51) or Telephone
Answer Code (#51). (See Basic User's
Guide: Using Remote Codes.)
You can change your code at any time. If you
want to make your code inactive, press
inactive setting – – –l.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
Using your Remote Access Code
4
Retrieving fax messages
4
a Dial your fax number from a telephone
or another fax machine using touch
tone.
a Dial your fax number from a telephone
or another fax machine using touch
tone.
b When your machine answers,
immediately enter your Remote Access
Code (3 digits followed by l).
b When your machine answers,
immediately enter your Remote Access
Code (3 digits followed by l). If you hear
one long beep, you have messages.
c The machine signals if it has received
messages:
c When you hear two short beeps, use the
dial pad to press 9 6 2.
No beeps
No messages received.
1 long beep
d Wait for a long beep, and then use the
dial pad to enter the number of the
remote fax machine where you want
your fax messages sent, followed by ##
(up to 20 digits).
Fax message received.
d The machine gives two short beeps to
tell you to enter a command. (See
The machine will hang up if you wait
longer than 30 seconds before entering
a command. If you enter an invalid
command the machine will beep three
times.
e Hang up after you hear your machine
beep. Your machine will call the remote
machine, which will then print your fax
messages.
Note
You can insert a pause in a fax number by
using the # key.
e Press 9 0 to reset the machine when you
have finished.
f Hang up.
Note
If your machine is set to Manualmode,
you can still access the remote retrieval
features. Dial the fax number as usual and
let the machine ring. After 100 seconds
you will hear a long beep to tell you to
enter the remote access code. You will
then have 30 seconds to enter the code.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving a fax
Changing the Fax Forwarding number
4
You can change the default setting of your fax
forwarding number from another telephone or
fax machine using touch tone.
a Dial your fax number from a telephone
or another fax machine using touch
tone.
b When your machine answers,
immediately enter your Remote Access
Code (3 digits followed by l). If you hear
one long beep, you have messages.
4
c When you hear two short beeps, use the
dial pad to press 9 5 4.
d Wait for a long beep, and then use the
dial pad to enter the new number of the
remote fax machine where you want
your fax messages forwarded followed
by ## (up to 20 digits).
e Press 9 0 to reset the machine when you
have finished.
f Hang up after you hear your machine
beep.
Note
You can insert a pause in a fax number by
using the # key.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
Remote fax commands
4
Follow the commands below to access features when you are away from the machine. When you
call the machine and enter your Remote Access Code (3 digits followed by l), the system will give
two short beeps and you must enter a remote command.
Remote commands
95 Change the fax forwarding,
Operation details
paging or fax storage settings
1 OFF
You can choose Offafter you have retrieved or erased all your
messages.
2 Fax Forwarding
3 Paging
One long beep means the change is accepted. If you hear three
short beeps, you cannot make the change because something
has not been set up (for example, a fax forwarding or paging
number has not been registered). You can register your fax
forwarding number by entering 4. (See Changing the Fax
the number, fax forwarding will work.
4 Fax Forwarding number
6 Fax Storage
96
Retrieve a fax
2 Retrieve all faxes
Enter the number of a remote fax machine to receive stored fax
3 Erase faxes from the memory
If you hear one long beep, fax messages have been erased
from the memory.
97
98
Check the receiving status
1 Fax
You can check whether your machine has received any faxes.
If yes, you will hear one long beep. If no, you will hear three
short beeps.
Change the Receive Mode
1 External TAD
2 Fax/Tel
If you hear one long beep, your change has been accepted.
3 Fax Only
90
Exit
Press 9 0 to exit remote retrieval. Wait for the long beep, then
replace the handset.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving a fax
Duplex (2-sided) printing for
Fax mode
Additional receiving
operations
4
4
Your machine can automatically print
received faxes onto both sides of the paper
when Duplex is set to On.
Printing a reduced incoming
fax
4
You can use Letter, Legal or Folio
(8.5 in. × 13 in.) size paper for this function
[16 to 28 lb (60 to 105 g/m )].
If you choose On, the machine automatically
reduces each page of an incoming fax to fit on
one page of Letter, A4, Legal or Folio size
paper.
2
a Press Menu.
4
The machine calculates the reduction ratio by
using the page size of the fax and your Paper
Size and Tray Use settings . (See Basic
User's Guide: Paper Size and Type and
Tray Use in Fax Mode.)
b Press a or b to display Fax.
Press Fax.
c Press a or b to display
Setup Receive.
Press Setup Receive.
a Press Menu.
d Press a or b to display Duplex.
Press Duplex.
b Press a or b to display Fax.
Press Fax.
e Press On(or Off).
f Press Stop/Exit.
c Press a or b to display
Setup Receive.
Press Setup Receive.
Note
d Press a or b to display
Auto Reduction.
• When Duplex is turned on incoming faxes
will automatically be reduced to fit the size
of paper in the paper tray.
Press Auto Reduction.
e Press On(or Off).
f Press Stop/Exit.
• When Duplexis set to On, the LCD
2
displays
(Duplex icon).
1
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
Setting the Fax Receive
Stamp
Receiving a fax at the end of a
conversation
4
4
You can set the machine to print the received
date and time in the top center of each
received fax page.
At the end of a conversation you can ask the
other party to send you a fax before you both
hang up.
a Press Menu.
a Ask the other party to place the
document in their machine and to press
the Start or Send key.
b Press a or b to display Fax.
Press Fax.
b When you hear the CNG tones (slowly
repeating beeps), press Start.
c Press a or b to display
Setup Receive.
Press Setup Receive.
c Press Receiveto receive a fax.
d Replace the external handset.
d Press a or b to display Fax Rx Stamp.
Press Fax Rx Stamp.
e Press On(or Off).
f Press Stop/Exit.
Note
• The received time and date will not appear
when using Internet Fax.
• Make sure you have set the current date
and time in the machine. (See Quick
Setup Guide.)
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving a fax
Setting the Print Density
4
Printing a fax from the
memory
4
You can adjust the Print Density setting to
make your printed pages darker or lighter.
If you are using the Fax Storage feature
(Menu, Fax, Setup Receive,
Forward/Page/Store), you can still print a
fax from the memory when you are at your
a Press Menu.
b Press a or b to display Fax.
Press Fax.
a Press Menu.
c Press a or b to display
Setup Receive.
b Press a or b to display Fax.
Press Fax.
4
Press Setup Receive.
d Press a or b to display
Print Density.
c Press a or b to display Print Fax.
Press Print Fax.
Press Print Density.
d Press Start.
e Press c to make the print darker.
Or, press d to make the print lighter.
Press OK.
e Press Stop/Exit.
Receiving faxes into memory
when the paper tray is empty
f Press Stop/Exit.
4
As soon as the paper tray becomes empty
during fax reception, the LCD shows
No Paperand begins receiving faxes into
the machine’s memory. Put some paper in
the paper tray. (See Basic User's Guide:
Loading paper and print media.)
The machine will carry on receiving the fax,
with the remaining pages being stored in the
memory, if enough memory is available.
Incoming faxes will continue to be stored in
the memory until the memory becomes full or
paper is loaded in the paper tray. When the
memory is full the machine will stop
automatically answering calls. To print the
faxes, put fresh paper in the tray.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
e Do one of the following:
Polling overview
4
Press Manualand enter a number
by pressing the buttons on the
Touchscreen.
Polling lets you set up your machine so other
people can receive faxes from you, but they
pay for the call. It also lets you call somebody
else’s fax machine and receive a fax from it,
so you pay for the call. The polling feature
needs to be set up on both machines for this
Press OK.
Press Address Book. Press
to choose Alphabetical Order or
Numerical Order. Press a or b to
select a number.
to work. Not all fax machines support polling.
Press OK.
Polling receive
4
Note
Polling receive lets you call another fax
machine to receive a fax.
One Touch Dial numbers begin with l.
Speed Dial numbers begin with #.
a Press Fax.
f After you have entered all the fax
b Press d or c to display Polling RX.
Press Polling RX.
g Press Start.
c Press On.
The machine polls each number or
Group number in turn for a document.
d Enter the fax number you are polling
using One Touch, Speed Dial, or the dial
pad. Press Start.
Stop Polling
4
To cancel the polling process, press
Stop/Exit while the machine is dialing.
Sequential polling
4
Sequential polling lets you request
documents from several fax machines in one
operation. Afterwards, a Sequential Polling
Report will be printed.
To cancel all sequential polling receive jobs,
a Press Fax.
b Press d or c to display Polling RX.
Press Polling RX.
c Press On.
d Press d or c to display Broadcasting.
Press Broadcasting.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving a fax
Canceling a Sequential Polling Job
a Press Stop/Exit.
4
b Do one of the following:
To cancel the entire sequential
polling job, press
To cancel the current job, press the
button that displays the number
4
To exit without canceling, press
Stop/Exit.
c When the LCD asks if you want to
cancel the entire sequential polling job,
do one of the following:
Press Yesto confirm.
To exit without canceling, press No
or Stop/Exit.
d Do one of the following:
To cancel the current job, press Yes.
To exit without canceling, press No
or Stop/Exit.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Dialing and storing numbers
5
5
Special line considerations
5
Telephone line
services
5
Roll over telephone lines
5
A roll over telephone system is a group of two
or more separate telephone lines that pass
incoming calls to each other if they are busy.
The calls are usually passed down or “rolled
over” to the next available telephone line in a
preset order.
Tone or Pulse (Canada only)
5
If you have a Pulse dialing service, but need
to send Tone signals (for example, for
telephone banking), follow the instructions
below. If you have Touch Tone service, you
will not need this feature to send tone signals.
Your machine can work in a roll over system
as long as it is the last number in the
sequence, so the call cannot roll away. Do not
put the machine on any of the other numbers;
when the other lines are busy and a second
fax call is received, the fax call would be
transferred to a line that does not have a fax
machine. Your machine will work best on a
dedicated line.
a Press Hook.
b Press # on the machine’s control panel.
Any digits dialed after this will send tone
signals.
When you are finished with the call, the
machine will return to the Pulse dialing
service.
Two-line telephone system
5
For Fax/Tel mode only
5
A two-line telephone system is nothing more
than two separate telephone numbers on the
same wall outlet. The two telephone numbers
can be on separate jacks (RJ11) or combined
into one jack (RJ14). Your machine must be
plugged into an RJ11 jack. RJ11 and RJ14
jacks may be equal in size and appearance
and both may contain four wires (black, red,
green, yellow). To test the type of jack, plug in
a two-line telephone and see if it can access
both lines. If it can, you must separate the line
for your machine.
When the machine is in Fax/Tel mode, it will
use the F/T Ring Time
(pseudo/double-ringing) to alert you to pick
up a voice call.
If you are at the machine, lift the external
telephone’s handset, and then press Hook to
answer.
If you are at an extension telephone, lift the
handset during the F/T Ring Time and then
press #51 between the pseudo/double rings.
If no one is on the line, or if someone wants to
send you a fax, send the call back to the
machine by pressing l51.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Dialing and storing numbers
a Put the two-line TAD and the two-line
Converting telephone wall outlets
5
telephone next to your machine.
There are three ways to convert to an RJ11
jack. The first two ways may require
b Plug one end of the telephone line cord
for your machine into the L2 jack of the
triplex adapter. Plug the other end into
the LINE jack on the back of the
machine.
assistance from the telephone company. You
can change the wall outlets from one RJ14
jack to two RJ11 jacks. Or, you can have an
RJ11 wall outlet installed and slave or jump
one of the telephone numbers to it.
c Plug one end of the first telephone line
cord for your TAD into the L1 jack of the
triplex adapter. Plug the other end into
the L1 or L1/L2 jack of the two-line TAD.
The third way is the easiest: Buy a triplex
adapter. You can plug a triplex adapter into
an RJ14 outlet. It separates the wires into two
separate RJ11 jacks (Line 1, Line 2) and a
third RJ14 jack (Lines 1 and 2). If your
machine is on Line 1, plug the machine into
L1 of the triplex adapter. If your machine is on
Line 2, plug it into L2 of the triplex adapter.
d Plug one end of the second telephone
line cord for your TAD into the L2 jack of
the two-line TAD. Plug the other end into
the EXT. jack on the left side of the
machine.
5
RJ14
1
2
RJ11
RJ14
3
4
Installing machine, external two-line
TAD and two-line telephone
5
1
2
3
4
Triplex Adapter
Two Line Telephone
External Two Line TAD
Machine
When you are installing an external two-line
telephone answering device (TAD) and a
two-line telephone, your machine must be
isolated on one line at both the wall jack and
at the TAD. The most common connection is
to put the machine on Line 2, which is
explained in the following steps. The back of
the two-line TAD must have two telephone
jacks: one labeled L1 or L1/L2, and the other
labeled L2. You will need at least three
telephone line cords, the one that came with
your machine and two for your external
two-line TAD. You will need a fourth line cord
if you add a two-line telephone.
You can keep two-line telephones on other
wall outlets as always. There are two ways to
add a two-line telephone to the machine’s
wall outlet. You can plug the telephone line
cord from the two-line telephone into the
L1+L2 jack of the triplex adapter. Or, you can
plug the two-line telephone into the TEL jack
of the two-line TAD.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5
Additional dialing
operations
5
Dialing access codes and
credit card numbers
5
Sometimes you may want to choose from
several long distance carriers when you send
a fax. Rates may vary depending on the time
and destination. To take advantage of low
rates, you can store the access codes of long
distance carriers and credit card numbers as
One Touch and Speed Dial numbers. You
can store these long dialing sequences by
dividing them and setting them up as
separate One Touch and Speed Dial
numbers in any combination. You can even
include manual dialing using the dial pad.
(See Basic User's Guide: Storing numbers.)
For example, you might have stored ‘555’ on
Speed Dial #003 and ‘7000’ on Speed Dial
#002. You can use them both to dial
‘555-7000’ if you press the following keys:
Press
(Address Book), #003and
Send a fax.
Press Address Book, #002, Send a fax
and Start.
Numbers can be added manually by entering
them on the dial pad:
Press
(Address Book), #003,
Send a fax, 7001 (on the dial pad), and
Start.
This would dial ‘555-7001’. You can also add
a pause by pressing the Redial/Pause key.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Dialing and storing numbers
d Do one of the following:
Additional ways to
store numbers
Press OKto accept the displayed
5
One Touch or Speed Dial number.
Enter a new number using the
Setting up Groups for
Broadcasting
buttons on the Touchscreen.
5
Press OK.
e Enter the Group name (up to 15
characters) by pressing the buttons on
the Touchscreen.
If you often want to send the same fax
message to many fax numbers you can set
up a Group.
Press
to choose numbers, letters or
Groups are stored on a One Touch button or
a Speed Dial number. Each Group uses up a
One Touch button or a Speed Dial location.
You can then send the fax message to all the
numbers stored in a Group just by pressing a
One Touch button or entering a Speed Dial
number, pressing Send a faxor
special characters. (See Basic User's
Guide: Entering text.)
Press OK.
5
f Do one of the following:
Press OKto accept the displayed
Send a E-mail, and then pressing Start.
Group number.
Before you can add numbers to a Group, you
need to store them as One Touch or Speed
Dial numbers. You can set up to 20 small
Groups, or you can assign up to 331 numbers
to one large Group.
Enter a new Group number using the
buttons on the Touchscreen.
Press OK.
g To select the Registration Type (Dial
type) and the file type, press d or c to
display
For a listing of the options available when you
set up Group numbers, see the table on
Fax/IFAX,
E-Mail B&W PDF,
E-Mail B&W TIFF,
E-Mail Color PDF,
E-Mail Color JPEG,
E-Mail Color XPS,
E-Mail Gray PDF,
E-Mail Gray JPEG,
E-Mail Gray XPS.
a Press
(Address Book).
b Press Edit.
c Press Setup Groups (One Touch)
or Setup Groups (Speed Dial)to
choose where you want to store the new
Group.
Press the option you want.
Note
The machine automatically allocates an
available Speed Dial number or One
Touch Dial location for the new Group.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5
h Add One Touch or Speed Dial numbers
to the Group by pressing the check box
to display a red check mark.
k Select the resolution from 300 dpi,
200 dpior 200 x 100 dpi.
If you chose E-Mail B&W PDF, go
If you want to list the numbers in
alphabetical order, press
.
If you chose E-Mail B&W TIFF, go
Press OK.
Note
l Select the resolution from 100 dpi,
200 dpi, 300 dpi, 600 dpior Auto.
• One Touch Dial numbers begin with l.
Speed Dial numbers begin with #.
If you chose E-Mail Color PDF,
• If the stored Registration Type (Dial type)
of a One Touch Dial number or a Speed
Dial number is not compatible with the
Registration Type (Dial type) selected in
Speed Dial number will be dimmed on the
LCD.
If you chose E-Mail Color JPEG
or E-Mail Color XPS, go to
m Select the resolution from 100 dpi,
200 dpi, 300 dpior Auto.
If you chose E-Mail Gray PDF, go
i To choose the fax/scan resolution for
the Group number, go to the appropriate
next step as shown in the following
table.
If you chose E-Mail Gray JPEGor
n Select the PDF type from PDF, PDF/A,
Secure PDFor Signed PDFthat will
be used to send E-mail.
Fax/IFAX
Go to step
E-Mail B&W PDF
E-Mail B&W TIFF
E-Mail Color PDF
E-Mail Color JPEG
E-Mail Color XPS
E-Mail Gray PDF
E-Mail Gray JPEG
E-Mail Gray XPS
Note
If you choose Secure PDF, the machine
will ask you to enter a four-digit password
using the numbers 0-9 before it starts
scanning.
o Press OKto confirm.
p Press Stop/Exit.
j Select the resolution from Standard,
Fine, S.Fine or Photoand go to
1
S.Fineis available if the Group includes only
fax numbers.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Dialing and storing numbers
Options for Setting Up Groups
5
The following chart shows the selections for setting up Group numbers.
When you store numbers, the LCD instructs you to choose from the options shown in the following
steps.
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Enter
Group
Location Name
Enter
Group
Enter
Group
Number Type
(Dial Type)
(1 to 20) Fax/IFAX
Select
Registration
Add Stored
One Touch
and Speed
Dial Numbers
to the Group
Select Resolution
Select File
Type
One
Touch
or
(Name)
Press OK
Fax Number or Standard, Fine,
E-mail
Address
-
S.Fine , Photo
5
Speed
Dial
E-Mail B&W E-mail
300 dpi, 200 dpi, PDF, PDF/A,
200 x 100 dpi
Secure PDF,
PDF
Address
Signed PDF
E-Mail B&W
TIFF
300 dpi, 200 dpi,
200 x 100 dpi
-
E-Mail
Color PDF
100 dpi, 200 dpi, PDF, PDF/A,
300 dpi, 600 dpi, Secure PDF,
Auto
Signed PDF
E-Mail
Color JPEG
100 dpi, 200 dpi,
300 dpi, 600 dpi,
Auto
-
E-Mail
Color XPS
100 dpi, 200 dpi,
300 dpi, 600 dpi,
Auto
-
E-MailGray
PDF
100 dpi, 200 dpi, PDF, PDF/A,
300 dpi, Auto
Secure PDF,
Signed PDF
E-MailGray
JPEG
100 dpi, 200 dpi,
300 dpi, Auto
-
-
E-MailGray
XPS
100 dpi, 200 dpi,
300 dpi, Auto
1
S.Fine does not appear if you add an E-mail address in step 5.
Note
• PDF/A is a PDF file format intended for long-term archiving. This format contains all the
necessary information to be able to reproduce the document after long-term storage.
• Secure PDF is a PDF file format that has been password-protected.
• Signed PDF is a PDF file format that helps prevent data tampering and the impersonation of
an author by including a digital certificate within the document. If you choose Signed PDF, you
must install a certificate on your machine using Web Based Management.
Choose Signed PDF from Administrator in Web Based Management. (See How to install a
certificate uu Network User's Guide.)
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5
Adding and deleting numbers in a Group
Changing Group numbers
5
If a number in the Group has a fax forwarding
number, it will be dimmed on the LCD and
cannot be deleted from the Group.
You can change a Group number that has
already been stored. If the Group has a fax
forwarding number, it will be dimmed on the
LCD. You cannot select the number to make
changes.
a Press
(Address Book).
b Press Edit.
c Press Change.
Changing a Group name, Resolution or
PDF type
d Press a or b to display the Group you
want to change.
a Press
(Address Book).
Press the Group.
b Press Edit.
e Press Add/Delete.
c Press Change.
f Press a or b to display the number you
d Press a or b to display the Group you
want to change.
want to add or delete.
g Press the check box of each number
you want to add to check it.
Press the Group.
e You can change the Group settings:
Press the check box of each number
you want to delete to uncheck it.
Press OKto confirm.
If you chose Name, enter the name
(up to 15 characters) by pressing the
buttons on the Touchscreen.
h Press OK.
Press OK.
i Press Stop/Exit.
If you chose Resolution, press one of
the available resolution options
displayed on the LCD.
If you chose PDF type, press one of
the available file type options
displayed on the LCD.
The LCD will display your new setting.
Note
How to change the stored name:
If you want to change a character, press
d or c to position the cursor under the
character you want to change, and then
press
. Re-enter the character.
f When you are finished making changes
to the Group, press OK.
g Press Stop/Exit.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Dialing and storing numbers
Deleting Group numbers
5
You can delete a Group number that has
already been stored. If a Group has a
scheduled job or fax forwarding number, it will
be dimmed on the LCD. You cannot select
the number to delete it.
a Press
(Address Book).
b Press Edit.
c Press Delete.
d Press a or b to display the Group you
want to delete.
5
Press the check box of the Group you
want to delete to check it.
Press OK.
e When the LCD shows
Erase This Data?, do one of the
following:
To Delete the Group, press Yes.
To exit without deleting the Group,
press No.
f Press Stop/Exit.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing reports
6
6
e Press d or c to choose an interval.
Fax reports
6
If you choose Every 50 Faxes, go to
step h
Some fax reports (Transmission Verification
Report and Fax Journal) can be printed
automatically and manually.
6, 12, 24 hours, 2 or 7 days
The machine will print the report at
the chosen time and then erase all
jobs from its memory.
Transmission Verification
Report
If the machine's memory becomes
full with 200 jobs before the time you
chose has passed, the machine will
print the Journal early and then erase
all jobs from the memory. If you want
an extra report before it is due to
print, you can print it without erasing
the jobs from the memory.
6
You can use the Transmission Verification
Report as proof that you sent a fax. (See
Basic User's Guide: Transmission
Verification Report.)
Fax Journal (Activity Report)
6
Every 50 Faxes
You can set the machine to print a journal at
specific intervals (every 50 faxes, 6, 12 or 24
hours, 2 or 7 days). If you set the interval to
Off, you can still print the report by following
The factory setting is Every 50 Faxes.
The machine will print the Journal
when the machine has stored 50
jobs.
f To enter the time to start printing, do one
of the following:
If you have set 12h Clockin the
Date&Timesetting, enter the time
(in 12-hour format) by pressing the
buttons on the Touchscreen, and
then press AMor PM.
a Press Menu.
b Press a or b to display Fax.
Press Fax.
c Press a or b to display
Report Setting.
Press OK.
If you have set 24h Clockin the
Date&Timesetting, enter the time
(in 24-hour format) by pressing the
buttons on the Touchscreen.
Press Report Setting.
d Press Journal Period.
Press OK.
(For example: enter 19:45 for 7:45
PM.)
press d or c to choose the day of the
week to print the journal.
h Press Stop/Exit.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing reports
How to print a report
6
Reports
6
The following reports are available:
a Press Menu.
1 Transmission
b Press a or b to display
Print Reports.
Displays the Transmission Verification
Report for your last outgoing 200 faxes
and prints the last report.
Press Print Reports.
c Press a or b to display the report you
want to print.
2 Tel Index List
Prints a list of names and numbers stored
in the One Touch and Speed Dial memory
in numerical or alphabetical order.
Press the report you want to print.
d Do one of the following:
3 Fax Journal
If you chose Transmission, go
Prints a list of information about your last
200 incoming and outgoing faxes.
(TX: transmit.) (RX: receive.)
If you chose Tel Index List,
press Numerical Orderor
Alphabetical Order.
6
4 User Settings
Prints a list of your current settings.
5 Network Config
If you chose other than
Transmissionor
Lists your network settings.
6 Drum Dot Print
e Do one of the following:
Prints the drum dot check sheet to
troubleshoot a dotted print problem.
To view the Transmission
Verification Report, press
View on LCD.
7 WLAN Report
Prints the result of wireless LAN
connectivity diagnosis.
To print the Transmission
Verification Report, press
Print Report.
f Press Start.
g Press Stop/Exit.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Making copies
7
7
Improving copy quality
7
Copy settings
7
You can choose from a range of quality
settings. The default setting is Auto.
You can change the copy settings temporarily
for the next copy.
Auto
Press Copyon the Touchscreen and then
press d or c to scroll through the copy
settings. When the setting you want is
displayed, press the button.
Auto is the recommended mode for
ordinary printouts. Suitable for documents
that contain both text and photographs.
When you are finished changing settings,
press Start.
Text
Suitable for documents containing only
text.
Stop copying
7
Photo
Suitable for copying photographs.
Graph
To stop copying, press Stop/Exit.
Suitable for copying receipts.
a Press Copy.
b Load your document.
c Enter the number of copies you want.
d Press d or c to display Quality.
Press Quality.
e Press Auto, Text, Photoor Graph.
f If you do not want to change additional
settings, press Start.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Making copies
Enlarging or reducing the
image copied
100%*
7
104% EXE LTR
141% A5 A4
200%
To enlarge or reduce the next copy follow the
instructions below:
50%
a Press Copy.
70% A4 A5
78% LGL LTR
83% LGL A4
85% LTR EXE
91% Full Page
94% A4 LTR
97% LTR A4
b Load your document.
c Enter the number of copies you want.
d Press d or c to display
Enlarge/ Reduce.
Press Enlarge/ Reduce.
e Press 100%, Enlarge, Reduce, Auto
or Custom (25-400%).
Auto
Custom (25-400%)
f Do one of the following:
*
The factory setting is shown in Bold
with an asterisk.
7
If you chose Enlargeor Reduce,
press the enlargement or reduction
ratio button you want.
1
Autosets the machine to calculate the
reduction ratio that best fits the size of paper.
Auto is only available when using the ADF.
If you chose Custom (25-400%),
enter an enlargement or reduction
ratio from 25% to 400%.
g If you do not want to change additional
settings, press Start.
Press OK.
Note
If you chose 100%or Auto , go to
Page Layout Options 2in1(P),
2in1(L), 2in1(ID), 4in1(P)and
4in1(L)are not available with
Enlarge/Reduce.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7
2sidei1side Short Edge Flip
Duplex (2-sided) Copying
7
1
If you want to use the automatic duplex copy
feature, load your document in the ADF.
1
If you get an Out of Memory message while
you are making duplex copies, try installing
extra memory. (See Installing extra memory
2
2
You must choose a 2-sided copy layout from
the following options before you can start
duplex copying. The layout of your document
determines which 2-sided copy layout you
should choose.
Landscape
2sidei2side
1
1
Portrait
2
2
2sidei2side
1sidei2side Long Edge Flip
1
1
1
1
2
2
2
2
2sidei1side Long Edge Flip
1sidei2side Long Edge Flip
1
1
1
2
1
2
2
1sidei2side Short Edge Flip
2
2sidei1side Long Edge Flip
1
1
2
1
1
2
2
2sidei1side Short Edge Flip
2
1
1sidei2side Short Edge Flip
1
2
2
1
1
2
2
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Making copies
a Press Copy.
Tray selection
7
b Load your document.
c Enter the number of copies you want.
You can change the Tray Use option for the
next copy.
a Press Copy.
d Press d or c to display Duplex Copy.
Press Duplex Copy.
b Load your document.
c Enter the number of copies you want.
e Press d or c to display the following
layout options:
2side2side,
d Press d or c to display Tray Use.
Press Tray Use.
1side2side LongEdgeFlip,
2side1side LongEdgeFlip,
1side2side ShortEdgeFlip,
2side1side ShortEdgeFlip,
Off
e Press MP>T1, MP>T1>T2 , T1>MP,
T1>T2>MP , Tray#1 Only,
Tray#2 Only or MP Only.
1
T2and Tray#2 Onlyappears only if Tray 2
Press the option you want.
is installed.
f If you do not want to change additional
settings, press Start.
f If you do not want to change additional
settings, press Start.
7
Note
To change the default setting for Tray Use
uu Basic User's Guide: Tray Use in Copy
mode
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7
Adjusting Brightness and
Contrast
Sorting copies
7
7
You can sort multiple copies. Pages will be
stacked in the order 1 2 3, 1 2 3, 1 2 3, and so
on.
Brightness
7
Adjust the copy brightness to make copies
darker or lighter.
a Press Copy.
b Load your document.
c Enter the number of copies you want.
a Press Copy.
b Load your document.
c Enter the number of copies you want.
d Press d or c to display Stack/Sort.
Press Stack/Sort.
d Press d or c to display Brightness.
Press Brightness.
e Press Sort.
f If you do not want to change additional
settings, press Start to scan the page.
If you placed the document in the ADF,
the machine scans the pages and starts
printing.
e Press d to make a darker copy or press
c to make a lighter copy.
Press OK.
f If you do not want to change additional
settings, press Start.
If you are using the scanner glass, go
Contrast
7
g After the machine scans the page, press
Yesto scan the next page.
Adjust the contrast to help an image look
sharper and more vivid.
h Place the next page on the scanner
a Press Copy.
glass.
Press Start.
the layout.
b Load your document.
c Enter the number of copies you want.
i After all the pages have been scanned,
d Press d or c to display Contrast.
Press Contrast.
e Press d to decrease the contrast or
press c to increase the contrast.
Press OK.
f If you do not want to change additional
settings, press Start.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Making copies
g After the machine scans the page, press
Yesto scan the next page.
Making N in 1 copies
(page layout)
7
h Place the next page on the scanner
You can reduce the amount of paper used
when copying by using the N in 1 copy
feature. This allows you to copy two or four
pages onto one page. If you want to copy
both sides of an ID card onto one page, see
glass.
Press Start.
the layout.
i After all the pages have been scanned,
Important
• Please make sure the paper size is set to
Letter, A4, Legalor Folio.
If you are copying from the ADF:
7
Insert your document face up in the direction
shown below:
• You cannot use the Enlarge/Reduce
setting with the N in 1 feature.
2in1(P)
• (P) means Portrait and (L) means
Landscape.
a Press Copy.
7
2in1(L)
b Load your document.
c Enter the number of copies you want.
4in1(P)
4in1(L)
d Press d or c to display Page Layout.
Press Page Layout.
e Press d or c to display Off(1in1),
2in1(P), 2in1(L), 2in1(ID) ,
4in1(P)or 4in1(L).
Press the button you want.
1
f If you do not want to change additional
settings, press Start to scan the page.
If you placed the document in the ADF,
the machine scans the pages and starts
printing.
If you are using the scanner glass, go
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Making copies
g Turn over your identification card and
place it on the left side of the scanner
glass.
2 in 1 ID Copy
7
You can copy both sides of your identification
card onto one page, keeping the original card
size.
h Press Start. The machine scans the
other side of the card and prints the
page.
Note
You can copy an identification card to the
extent permitted under applicable laws.
Note
When 2 in 1 ID Copy is chosen, the
machine sets the quality to Photoand the
contrast to +2.
See Product Safety Guide: Legal
limitations for copying (MFC and DCP
only).
a Press Copy.
b Place your identification card face down
at the left corner of the scanner glass.
7
1
1
0.16 in. (4 mm) or greater (top, left)
Even if a document is placed on the
ADF, the machine scans the data
from the scanner glass when in this
mode.
c Enter the number of copies you want.
d Press d or c to display Page Layout.
Press Page Layout.
e Press d or c to display 2in1(ID).
Press 2in1(ID).
f Press Start.
After the machine scans the first side of
the card, the LCD will display
Turn over the ID Card Then
Press Start.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7
Setting your changes as the
new default
Setting your favorites
7
7
You can store the copy settings that you use
most often by setting them as a favorite. You
can set up to three favorites.
You can save the copy settings for Quality,
Brightnessand Contrastyou use most
often by setting them as the default. These
a Press Copy.
settings will stay until you change them again.
b Choose the copy option and settings
a Press Copy.
you want to store.
b Press d or c to choose the setting you
want to change, and then press the new
option.
c Press d or c to display
Favorite Settings.
Press Favorite Settings.
Repeat this step for each setting you
want to change.
d Press Store.
c After changing the last setting, press
d or c to display Set New Default.
Press Set New Default.
e Press the location where you want to
store your setting for Favorite:1,
Favorite:2or Favorite:3.
d Press Yes.
f Do one of the following:
If you want to rename your setting,
e Press Stop/Exit.
press
to delete characters. Then
enter the new name (up to 12
characters). Press OK.
Restoring all copy settings to
the factory settings
7
If you do not want to rename your
setting, press OK.
You can restore all the copy settings you
have changed to the factory settings. These
settings will stay until you change them again.
g Press Stop/Exit.
a Press Copy.
Retrieving your favorite setting
7
When you are ready to use one of your
favorite set of settings, you can recall it.
b Press d or c to display
Factory Reset.
Press Factory Reset.
a Press Copy.
c Press Yes.
b Press
Favorite.
d Press Stop/Exit.
c Press the favorite setting you want to
retrieve.
d Press Start.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Making copies
Rename your favorite setting
7
After you stored your favorite setting, you can
rename it.
a Press Copy.
b Press d or c to display
Favorite Settings.
Press Favorite Settings.
c Press Rename.
d Press the favorite setting you want to
rename.
e Enter the new name (up to 12
characters).
f Press OK.
g Press Stop/Exit.
7
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Routine maintenance
A
A
Cleaning and checking
the machine
Important
Use neutral detergents. Cleaning with
volatile liquids such as thinner or benzine
will damage the surface of the machine.
A
Clean the outside and inside of the machine
regularly with a dry, lint-free cloth. When you
replace the toner cartridge or the drum unit,
make sure that you clean the inside of the
machine. If printed pages are stained with
toner, clean the inside of the machine with a
dry, lint-free cloth.
WARNING
• DO NOT put a toner cartridge or a toner
cartridge and drum unit assembly into a
fire. It could explode, resulting in
injuries.
• DO NOT use flammable substances,
any type of spray, or an organic
solvent/liquid containing alcohol or
ammonia to clean the inside or outside
of the product. Doing so could cause a
fire or electrical shock. Instead, use only
a dry, lint-free cloth.
(See Product Safety Guide: To use the
product safely.)
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Routine maintenance
e Remove anything that is stuck inside the
Cleaning the outside of the
machine
paper tray.
A
f If paper is loaded in the paper tray,
remove it.
a Turn off the machine’s power switch.
g Wipe the inside and the outside of the
paper tray with a dry, lint-free cloth to
remove dust.
b Unplug the telephone line cord first,
disconnect all cables, and then unplug
the power cord from the AC power
outlet.
c Wipe the outside of the machine with a
dry, lint-free cloth to remove dust.
h Re-load the paper and put the paper tray
firmly back in the machine.
A
i Plug the machine’s power cord back into
the AC power outlet first, connect all
cables, and then plug in the telephone
line cord.
j Turn on the machine’s power switch.
d Pull the paper tray completely out of the
machine.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
e In the ADF unit, clean the white bar (1)
and the glass strip (2) underneath it with
a soft lint-free cloth moistened with
water.
Cleaning the scanner
A
a Turn off the machine’s power switch.
b Unplug the telephone line cord first,
disconnect all cables, and then unplug
the power cord from the AC power
outlet.
1
2
c Unfold the ADF document support (1)
and then open the ADF cover (2).
Clean the white bar (3) and the scanner
glass strip (4) underneath it with a soft
lint-free cloth moistened with water.
Close the ADF cover (2) and fold the
ADF document support (1).
Note
2
3
In addition to cleaning the scanner glass
and glass strip with a soft lint-free cloth
moistened with water, run your finger tip
over the glass to see if you can feel
anything on it. If you feel dirt or debris,
clean the glass again concentrating on
that area. You may need to repeat the
cleaning process three or four times. To
test, make a copy after each cleaning.
1
4
d Lift the document cover (1).
Clean the white plastic surface (2) and
scanner glass (3) underneath it with a
f Close the document cover.
g Plug the machine’s power cord back into
the AC power outlet first, connect all
cables, and then plug in the telephone
line cord.
soft lint-free cloth moistened with water.
1
h Turn on the machine’s power switch.
2
3
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Routine maintenance
c Take out the drum unit and toner
Cleaning the corona wire
A
cartridge assembly.
If you have print quality problems or the LCD
shows Drum Error, clean the corona wire
as follows:
a Leave the machine turned on for
10 minutes for the internal fan to cool
the extremely hot parts inside the
machine.
b Press the front cover release button and
then open the front cover.
WARNING
HOT SURFACE
After you have just used the machine, some
internal parts of the machine will be
extremely hot. Wait for the machine to cool
down before you touch the internal parts of
the machine.
A
65
Download from Www.Somanuals.com. All Manuals Search And Download.
d Clean the corona wire inside the drum
unit by gently sliding the green tab from
left to right and right to left several times.
Important
• We recommend that you put the drum unit
and toner cartridge assembly on a piece of
disposable paper or cloth in case you
accidentally spill or scatter toner.
• Handle the drum unit and toner cartridge
assembly carefully. If toner scatters on
your hands or clothes, wipe or wash it off
with cold water.
• To prevent damage to the machine from
static electricity, DO NOT touch the
electrodes shown in the illustration.
1
Note
Be sure to return the tab to the home
position (a) (1). If you do not, printed
pages may have a vertical stripe.
e Put the drum unit and toner cartridge
assembly back into the machine.
f Close the front cover of the machine.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Routine maintenance
h Press the front cover release button and
Cleaning the drum unit
A
then open the front cover.
If your printout has black or white dots or
other repeating marks at 3.7 in. (94 mm)
intervals, the drum may have foreign
material, such as glue from a label stuck on
the drum surface. Follow the steps below to
solve the problem.
a Make sure that the machine is in the
Ready mode.
b Press Menu.
c Press a or b to display
Print Reports.
Press Print Reports.
d Press a or b to display Drum Dot
Print.
Press Drum Dot Print.
e The machine will display
Press Start. Press Start.
A
i Take out the drum unit and toner
cartridge assembly.
f Leave the machine turned on for
10 minutes for the internal fan to cool
the extremely hot parts inside the
machine.
g After the machine has cooled down, turn
off the machine’s power switch.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Important
WARNING
• We recommend that you put the drum unit
and toner cartridge assembly on a piece of
disposable paper or cloth in case you
accidentally spill or scatter toner.
HOT SURFACE
After you have just used the machine, some
internal parts of the machine will be
extremely hot. Wait for the machine to cool
down before you touch the internal parts of
the machine.
• Handle the drum unit and toner cartridge
assembly carefully. If toner scatters on
your hands or clothes, wipe or wash it off
with cold water.
• To prevent damage to the machine from
static electricity, DO NOT touch the
electrodes shown in the illustration.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Routine maintenance
j Push down the green lock lever and take
l Use the numbered markers next to the
drum roller to find the mark. For
the toner cartridge out of the drum unit.
example, a dot in column 2 on the check
sheet would mean that there is a mark in
the "2" region of the drum.
k Turn the drum unit as shown in the
illustration. Make sure that the drum unit
gear (1) is on the left hand side.
A
1
69
Download from Www.Somanuals.com. All Manuals Search And Download.
m Turn the drum unit gear toward you by
hand while checking the surface of the
suspected area.
p Put the toner cartridge back into the
drum unit until you hear it lock into place.
If you put the cartridge in correctly, the
green lock lever will lift automatically.
n When you have found the mark on the
drum that matches the drum dot check
sheet, wipe the surface of the drum
gently with a cotton swab until the mark
on the surface comes off.
Note
Make sure that you put in the toner
cartridge correctly or it may separate from
the drum unit.
Important
DO NOT clean the surface of the
photosensitive drum with a sharp object or
any liquids.
o Turn the drum unit back over.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Routine maintenance
q Put the drum unit and toner cartridge
Cleaning the paper pick-up
rollers
assembly back into the machine.
A
Cleaning the paper pick-up roller periodically
may prevent paper jams by insuring the
proper feeding of paper.
If you have paper feed problems, clean the
pick-up rollers as follows:
a Turn off the machine’s power switch.
b Unplug the telephone line cord first,
disconnect all cables, and then unplug
the power cord from the AC power
outlet.
c Pull the paper tray completely out of the
machine.
r Close the front cover of the machine.
s Turn on the machine’s power switch.
A
71
Download from Www.Somanuals.com. All Manuals Search And Download.
d Tightly wring out a lint-free cloth soaked
in lukewarm water, and then wipe the
separator pad (1) of the paper tray with
it to remove dust.
g Plug the machine’s power cord back into
the AC power outlet first, connect all
cables, and then plug in the telephone
line cord.
h Turn on the machine’s power switch.
1
e Wipe the two pick-up rollers (1) inside of
the machine to remove dust.
1
f Put the paper tray back in the machine.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Routine maintenance
Checking the Page Counters
A
Checking the remaining life of
parts
A
You can see the machine’s Page Counters
for copies, printed pages, reports and lists,
faxes or a summary total.
You can see the machine’s parts life on the
LCD.
a Press Menu.
a Press Menu.
b Press a or b to display
Machine Info..
b Press a or b to display
Machine Info..
Press Machine Info..
Press Machine Info..
c Press Page Counter.
c Press Parts Life.
The LCD shows number of pages for
Total, Fax/List, Copyor Print.
d Press a or b to see the approximate
remaining parts life of the Drum, Fuser,
Laser, PF Kit MP, PF Kit 1and
d Press Stop/Exit.
PF Kit 2 .
1
When Tray 2 is installed.
e Press Stop/Exit.
Note
A
• The life check will be accurate only if you
have reset the part counter when you
installed a new part. It will not be accurate
if that part’s life counter was reset during
the life of the used part.
• The remaining life of the toner cartridge is
listed on the User Settings report. (See
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing periodic
maintenance parts
A
The periodic maintenance parts will need to
be replaced regularly to maintain the print
quality. The parts listed below will have to be
replaced after printing approximately 50,000
pages for PF Kit MP and 100,000 pages
for PF Kit 1, PF Kit 2, Fuser and Laser.
Please call Brother Customer Service when
the following messages appear on the LCD.
LCD message
Description
Replace Parts
Fuser Unit
Replace the fuser unit.
Replace Parts
Laser Unit
Replace the laser unit.
Replace Parts
PF Kit 1
Replace the paper feeding
kit for the paper tray.
Replace Parts
Replace the paper feeding
kit for the lower tray
(option).
PF Kit 2
Replace Parts
PF Kit MP
Replace the paper feeding
kit for the multi-purpose
tray.
1
2
Letter or A4 size single-sided pages.
When Tray 2 is installed.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Routine maintenance
Packing and shipping
the machine
Note
• If for any reason you must ship your
machine, carefully repack the machine in
the original packaging to avoid any
damage during transit. The machine
should be adequately insured with the
carrier.
A
WARNING
This machine is heavy and weighs more
than 39.0 lb (17.7 kg). To prevent possible
injuries at least two people should lift the
machine. Be careful not to pinch your
fingers when you put the machine down.
• If you are returning your machine to
Brother as part of the Exchange Service,
pack only the machine. Keep all separate
parts, including the drum unit, the toner
cartridge, and printed materials to use with
your ‘Exchange’ machine.
a Turn off the machine’s power switch.
Leave the machine turned off for at least
10 minutes to cool down.
b Disconnect all the cables, and then
unplug the power cord from the AC
power outlet.
A
If you use a Lower Tray, DO NOT carry the
machine with the Lower Tray as you may
be injured or cause damage to the machine
because it is not attached to the Lower
Tray.
c Put the packing material (1) into the
carton.
FRONT
1
75
Download from Www.Somanuals.com. All Manuals Search And Download.
d Wrap the machine in a plastic bag, then
e Put the packing material (2) marked
“RIGHT” on the right of the machine. Put
the packing material (3) marked “LEFT”
on the left of the machine. Put the AC
power cord and printed materials in the
original carton as shown in the
put it on the bottom packing material (1).
illustration.
LEFT
RIGHT
2
3
1
FRONT
Note
If you are returning your machine to
Brother as part of the Exchange Service,
pack only the machine. Keep all separate
parts, including the drum unit, toner
cartridge, and printed materials to use with
your ‘Exchange’ machine.
f Close the carton and tape it shut.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Routine maintenance
g <If you have a Lower Tray>
Repack the lower tray as shown in the
illustration.
A
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Options
Optional paper tray
(LT-5400)
Memory board
B
B
MFC-8950DW(T) has 128 MB of standard
memory. The machine has one slot for
optional memory expansion. You can
increase the memory up to maximum of
384 MB by installing one SO-DIMM (Small
Outline Dual In-line Memory Module).
An optional lower tray can be installed on the
MFC-8950DW , and it can hold up to 500
2
sheets of 20 lb (80 g/m ) paper.
When an optional tray is installed, the
machine can hold up to 1050 sheets of plain
paper.
SO-DIMM Types
B
For information regarding memory for your
Brother machine please visit us at:
In general, the SO-DIMM must have the
following specifications:
Type
144-pin and 16-bit output
4
For setup, see the Instructions that we have
supplied with the lower tray unit.
CAS latency
Clock
frequency
267 MHz (533 Mb/S/Pin) or
more
1
Tray 2 is standard on MFC-8950DWT.
Capacity
Height
256 MB
B
WARNING
1.18 in. (30.0 mm)
DDR2 SDRAM
DRAM type
If you use a Lower Tray, DO NOT carry the
machine with the Lower Tray as you may
be injured or cause damage to the machine
because it is not attached to the Lower
Tray.
Note
• There might be some SO-DIMMs that will
not work with the machine.
• For more information, call the dealer you
bought the machine from or Brother
Customer Service.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
e Hold the SO-DIMM by the edges and
align the notches in the SO-DIMM with
the protrusions in the slot. Insert the
SO-DIMM diagonally (1), then tilt it
toward the interface board until it clicks
into place (2).
Installing extra memory
B
a Turn off the machine’s power switch.
Unplug the telephone line cord.
b Disconnect the interface cable from the
machine, and then unplug the power
cord from the AC power outlet.
1
2
Note
Be sure to turn off the machine’s power
switch before you install or remove the
SO-DIMM.
c Remove the plastic SO-DIMM
cover (1).
1
f Put the plastic SO-DIMM cover (1) back
on.
1
d Unpack the SO-DIMM and hold it by its
edges.
Important
To prevent damage to the machine from
static electricity, DO NOT touch the
memory chips or the board surface.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Options
g Plug the machine’s power cord back into
the AC power outlet first, and then
connect the interface cable.
h Plug in the telephone line cord. Turn on
the machine’s power switch.
Note
To make sure that you have installed the
SO-DIMM correctly, you can print the User
Settings List that shows the current
RAM SIZE. (See How to print a report
B
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
C
C
This is a comprehensive list of features and terms that appear in Brother manuals. Availability of
these features depends on the model you purchased.
ADF (automatic document feeder)
Coding method
The document can be placed in the ADF
and scanned one page at a time
automatically.
Method of coding the information
contained in the document. All fax
machines must use a minimum standard
of Modified Huffman (MH). Your machine
is capable of greater compression
methods, Modified Read (MR), Modified
Modified Read (MMR) and JBIG, if the
receiving machine has the same
capability.
Auto Reduction
Reduces the size of incoming faxes.
Automatic fax transmission
Sending a fax without picking up the
handset of the external telephone or
pressing Hook.
Communication error (or Comm. Error)
Automatic Redial
An error during fax sending or receiving,
usually caused by line noise or static.
A feature that enables your machine to
redial the last fax number after five
minutes if the fax did not go through
because the line was busy.
Compatibility group
The ability of one fax unit to communicate
with another. Compatibility is assured
between ITU-T Groups.
Backup Print
Your machine prints a copy of every fax
that is received and stored in memory.
This is a safety feature so you will not lose
messages during a power failure.
Contrast
Setting to compensate for dark or light
documents, by making faxes or copies of
dark documents lighter and light
documents darker.
Batch Transmission
As a cost saving feature, all delayed faxes
to the same fax number will be sent as one
transmission.
Delayed Fax
Sends your fax at a specified later time
that day.
Beeper Volume
Distinctive Ring
Volume setting for the beep when you
press a key or make an error.
A subscriber service purchased from the
telephone company that gives you
another telephone number on an existing
telephone line. The Brother machine uses
the new number to simulate a dedicated
fax line.
Broadcasting
The ability to send the same fax message
to more than one location.
Cancel Job
Dual Access
Cancels a programmed print job and
clears it from the machine’s memory.
Your machine can scan outgoing faxes or
scheduled jobs into memory at the same
time it is sending a fax or receiving or
printing an incoming fax.
CNG tones
The special tones (beeps) sent by fax
machines during automatic transmission
to tell the receiving machine that a fax
machine is calling.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Easy Receive
Fine resolution
Enables your machine to respond to CNG
tones if you interrupt a fax call by
answering it.
Resolution is 203 × 196 dpi. It is used for
small print and graphs.
Gray Scale
ECM (Error Correction Mode)
The shades of gray available for copying
and faxing photographs.
Detects errors during fax transmission
and resends the pages of the fax that had
an error.
Group number
A combination of One Touch and
Speed Dial numbers that are stored on an
One Touch button or in a Speed Dial
location for Broadcasting.
Extension telephone
A telephone on the fax number that is
plugged into a separate telephone wall
jack.
Journal Period
External telephone
The pre-programmed time period
between automatically printed Fax
Journal Reports. You can print the Fax
Journal on demand without interrupting
the cycle.
A telephone that is plugged into the EXT
jack of your machine.
F/T Ring Time
The length of time that the Brother
LCD (liquid crystal display)
machine pseudo/double-rings (when the
Receive Mode setting is Fax/Tel) to notify
you to pick up a voice call that it answered.
The display screen on the machine that
shows interactive messages during
On-Screen Programming and shows the
date and time when the machine is idle.
Fax Forwarding
Sends a fax received into the memory to
another pre-programmed fax number.
Manual fax
When you press Hook to hear the
receiving fax machine answer before you
press Start to begin transmission.
Fax Journal
Lists information about the last
200 incoming and outgoing faxes. TX
means Transmit. RX means Receive.
C
Menu mode
Programming mode for changing your
machine’s settings.
Fax Receive Code
(Fax/Tel mode only)
OCR (optical character recognition)
Press this code (l51) when you answer a
fax call on an extension or external
telephone.
Nuance™ PaperPort™ 12SE or Presto!
PageManager software application
converts an image of text to text you can
edit.
Fax Storage
You can store faxes in the memory.
One Touch
Fax tones
Buttons on the machine’s Touchscreen
where you can store numbers for easy
dialing. You can store a second number
The signals sent by sending and receiving
fax machines while communicating
information.
17- 32
on each key if you press
and then
Fax/Tel
press the One Touch button where you
want to store the second number.
You can receive faxes and telephone
calls. Do not use this mode if you are
using a telephone answering device
(TAD).
Out of Paper Reception
Receives faxes into the machine’s
memory when the machine is out of paper.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Overseas Mode
Ring Volume
Makes temporary changes to the fax
tones to accommodate noise and static on
overseas telephone lines.
Volume setting for the machine’s ring.
Scanning
The process of sending an electronic
image of a paper document into your
computer.
Paging
This feature enables your machine to call
your cell phone or pager when a fax is
received into its memory.
Search
An electronic, alphabetical listing of stored
One Touch, Speed Dial, Group numbers
and LDAP.
Pause
Allows you to place a 3.5 second delay in
the dialing sequence while you are dialing
using the dial pad or while you are storing
One Touch and Speed Dial numbers.
Press Redial/Pause as many times as
needed for longer pauses.
Speed Dial
A pre-programmed number for easy
dialing.
Station ID
The stored information that appears on
the top of faxed pages. It includes the
sender’s name and fax number.
Polling
The process of a fax machine calling
another fax machine to retrieve waiting fax
messages.
TAD (telephone answering device)
You can connect an external device or
answering machine to the EXT. jack of
your machine.
Pulse (Canada only)
A form of rotary dialing on a telephone
line.
Telephone Answer Code
(Fax/Tel mode only)
Real Time Transmission
When memory is full, you can send faxes
in real time.
When the machine answers a voice call, it
pseudo/double-rings. You can pick up at
an extension telephone by pressing this
code (#51).
Remaining Jobs
You can check which programmed fax
jobs are waiting in the memory and cancel
the jobs individually.
Tel Index List
A listing of names and numbers stored in
One Touch and Speed Dial memory, in
numerical order.
Remote Access Code
Your own four-digit code (– – –l) that
allows you to call and access your
machine from a remote location.
Temporary settings
You can choose certain options for each
fax transmission and copy without
changing the default settings.
Remote Retrieval Access
The ability to access your machine
remotely from a touch tone telephone.
Tone
Resolution
A form of dialing on the telephone line
used for Touch Tone telephones.
The number of vertical and horizontal lines
per inch.
Transmission
Ring Delay
The process of sending faxes over the
telephone lines from your machine to the
receiving fax machine.
The number of rings before the machine
answers in Fax Onlyand Fax/Tel
modes.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Transmission Verification Report
A report for each transmission, that shows
its date, time and number.
User Settings List
A printed report that shows the current
settings of the machine.
C
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
D
A
D
Apple Macintosh
See Software User's Guide.
Deep Sleep mode ...................................... 4
Destination Display .................................. 28
Dialing
B
Broadcasting ............................................21
access codes and credit card
Groups (broadcasting) .......................... 21
Drum unit
C
Canceling
Dual access ............................................. 20
Duplex copy ............................................. 54
broadcast in process .............................22
fax jobs in memory ................................24
Cleaning
E
Connecting
Enlarge/Reduce ....................................... 53
F
two-line external TAD or telephone .......43
ControlCenter2 (for Macintosh)
See Software User's Guide.
Fax codes
Fax forwarding
®
ControlCenter4 (for Windows )
See Software User's Guide.
Copy
Fax, stand-alone
enlarge/reduce ......................................53
N in 1 (page layout) ...............................57
custom comments .................................26
for all faxes ............................................27
printed form ...........................................27
receiving
86
Download from Www.Somanuals.com. All Manuals Search And Download.
broadcasting ......................................21
real time transmission ........................22
Fax/Tel mode
N
N in 1 (page layout) ................................. 57
Network
faxing
See Software User's Guide.
printing
See Network User's Guide.
scanning
See Software User's Guide.
Nuance™ PaperPort™ 12SE
See Software User's Guide and Help in the
PaperPort™ 12SE application to access
How-to-Guides.
receiving faxes ......................................42
P
G
Page layout (N in 1) ................................. 57
programming your pager number ......... 31
PC-Fax
H
See Software User's Guide.
Polling
Presto! PageManager
See Software User's Guide. See also Help
in the Presto! PageManager application.
Print
Printing
J
Jacks
convert to RJ11 jack
L
D
LCD (liquid crystal display)
See Software User's Guide.
M
Q
Machine information
Macintosh
Quality
Quick dial
See Software User's Guide.
access codes and credit card
broadcasting ......................................... 21
using Groups ..................................... 21
Group dial
Manual
transmission ..........................................19
Memory
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Brother International Corporation
100 Somerset Corporate Boulevard
P.O. Box 6911
Bridgewater, NJ 08807-0911 USA
Brother International Corporation (Canada) Ltd.
1 rue Hôtel de Ville,
Dollard-des-Ormeaux, QC, Canada H9B 3H6
Visit us on the World Wide Web
These machines are approved for use in the country of purchase only. Local Brother companies
or their dealers will only support machines purchased in their own countries.
Download from Www.Somanuals.com. All Manuals Search And Download.
|