2-In-1 Stand
Assembly Instructions
Model: BDS1642
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts
Tools Required
#
1
Qty. Description
7/32" Allen Wrench (included)
1
1
1
2
1
1
1
1
1
TUBE, BOTTOM CROSS BRACE
ASSEMBLY, REAR LEFT STABILIZER
ASSEMBLY, REAR RIGHT STABILIZER
ASSY, STAND LEG
2
3
You will also need:
4
9/16" Socket
9/16" Wrench or Adjustable Wrench
Utility knife or scissors to cut nylon ties
5
WELDMENT, LEFT DUMBBELL PLATFORM
WELDMENT, RIGHT DUMBBELL PLATFORM
WELDMENT, TOWEL BAR
6
7
8
FOOT PEGS, SET OF FOUR
9
HOLD DOWN STRAPS, 2F 2M
10
11
12
13
14
15
16
17
20 NUT-NL 0.375-16 G2-BlkZ
36 WASHER-FLAT 0.375 REGULAR BLKZ
8
4
4
4
1
1
SCREW-BHCS 0.375-16x3.0 G2-BlkO
SCREW-BHCS 0.375-16x2.75 G2-BlkO
SCREW-BHCS 0.375-16x2.5 G2-BlkO
SCREW-FHCS 0.375-16x1.0 G2-BlkO
WHEELS, CASTER SET OF FOUR
PLATE, CENTER W/ LOGO
Hardware
Qty
Hardware Card A:
3.0"
2.75" Screw, Button Head
2.5" Screw, Button Head
1.0" Screw, Flat Head
Nut, Lock
4
4
4
12
20
Button Head
2.75"
Washer, Flat
Button Head
Hardware Card B:
3.0" Screw, Button Head
Nut, Lock
2.5"
8
8
16
Button Head
Washer, Flat
7/32" Allen Wrench
Flat Head
Lock Nut
Flat Washer
3
Download from Www.Somanuals.com. All Manuals Search And Download.
step
1
�
�
��
��
��
��
Figure 1
Parts:
• Stand Leg (#4)
• Rear Left Stabilizer (#2)
Hardware
Qty
• 3" Screws (#12)
• Washers (#11)
• Nuts (#10)
2
4
2
Tools:
• Hex Key (7/32”)
1-1 Attach the Rear Left Stabilizer (#2) to the Stand Leg (#4) using the hardware shown in Figure 1.
Note: Do not tighten hardware.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
step
2
�
��
��
�
��
��
Figure 2
Parts:
• Stand Leg (#4)
• Rear Right Stabilizer (#3)
Hardware
Qty
• 3" Screws (#12)
• Washers (#11)
• Nuts (#10)
2
4
2
Tools:
• Hex Key (7/32”)
2-1 Attach the Rear Right Stabilizer (#3) to the Stand Leg (#4) using the hardware shown in Figure 2.
Note: Do not tighten hardware.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
step
3
�
�
��
�
��
��
�
�
Figure 3
Parts:
• Cross Brace (#1)
• Left Stand Leg assembly from Step 1
• Right Stand Leg assembly from Step 2
Hardware
Qty
• 3" Screws (#12)
• Washers (#11)
• Nuts (#10)
4
8
4
Tools:
• Hex Key (7/32”)
3-1 Attach the Bottom Cross Brace (#1) to the Rear Left Stabilizer (#2) and Rear Right Stabilizer (#3)
using the hardware shown in Figure 3. Make sure that the narrower edge of the Cross Brace
(#1) is closer to the Stand Leg (#4) uprights.
Note: Do not tighten hardware.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
step
4
��
��
��
��
��
��
��
��
��
Figure 4
Parts:
• Stand Leg and Cross Brace assembly from Step 3
• Center Plate (#17)
Hardware
Qty
• 2.5" Screws (#14)
• Washers (#11)
• Nuts (#10)
4
8
4
Tools:
• Hex Key (7/32”)
• Wrench/Socket (9/16”) or Adjustable Wrench
4-1 Install the Center Plate (#17) to both Stand Legs (#4) using the hardware shown in Figure 4.
Note: Make sure that the Center Plate edges are on the outer sides of the legs, and that the logo
on the Plate is right side up.
4-2 Tighten all hardware from Steps 1, 2 and 3 securely.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
step
5
�
��
��
��
��
Figure 5
Parts:
• Stand base assembly from Step 4
• Left Dumbbell Platform (#5)
Hardware
Qty
• 2.75" Screws (#13) 2
• Washers (#11)
• Nuts (#10)
4
2
Tools:
• Hex Key (7/32”)
• Wrench/Socket (9/16”) or Adjustable Wrench
5-1 Secure the Left Dumbbell Platform (#5) to left Stand Leg (#4) using the hardware shown in
Figure 5.
Note: Make sure the screw holes in the Platform are toward the center of the stand.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
step
6
�
��
��
��
��
Figure 6
Parts:
• Stand base assembly from Step 5
• Right Dumbbell Platform (#6)
Hardware
Qty
• 2.75" Screws (#13) 2
• Washers (#11)
• Nuts (#10)
4
2
Tools:
• Hex Key (7/32”)
• Wrench/Socket (9/16”) or Adjustable Wrench
6-1 Secure the Right Dumbbell Platform (#6) to right Stand Leg (#4) using the hardware shown in
Figure 6.
Note: Make sure the screw holes in the Platform are toward the center of the stand.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
step
7
�
��
��
��
��
��
��
Figure 7
Parts:
• Stand assembly from Step 6
• Towel Bar (#7)
Hardware
Qty
• 1" Screws (#15)
• Washers (#11)
• Nuts (#10)
4
4
4
Tools:
• Hex Key (7/32”)
• Wrench/Socket (9/16”) or Adjustable Wrench
7-1 Attach the Towel Bar (#7) to the Left Dumbbell Platform (#5) and the Right Dumbbell Platform
(#6) using hardware shown in Figure 7. Hand tighten screws in a cross pattern, to ensure
even fit.
7-2 Tighten all screws securely.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
step
8
�
��
�
Figure 8
Parts:
• Stand assembly from Step 7
• Foot Pegs (#8) or Caster Wheels (#16)
• Hold Down Straps (#9)
8-1 Attach either Foot Pegs (#8) or Caster Wheels (#15) to the Rear Left Stabilizer (#2), the Rear
Right Stabilizer (#3), and both Stand Legs (#4). See Figure 8.
8-2 Attach the Hold Down Straps (#9) to the Left Dumbbell Platform (#5) and the Right Dumbbell
Platform (#6) as shown in Figure 8.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
16400 SE Nautilus Dr.
Vancouver, Washington, USA 98683
© 2006 Nautilus, Inc. All Rights Reserved.
Bowflex and Bowflex SelectTech are either registered
trademarks or trademarks of Nautilus, Inc.
Specifications subject to change.
P/N 000-3708 RevB 02/06
Download from Www.Somanuals.com. All Manuals Search And Download.
|