en-us Use and care manual
Washer
WAP24201UC
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
e
n
u
s
U
s
a
n
d
c
a
r
a
n
u
a
l
Your washing machine is intended for ........................ 5
Introduction to your new washer ................................. 7
Dimensions and clearances required .......................... 8
Laundry detergents and additives ............................. 18
Default cycle settings .................................................. 21
Additional program settings ....................................... 21
Before doing any laundry with your washing
STATEMENT OF LIMITED PRODUCT WARRANTY ... 33
Additional information on products, accessories,
replacement parts and services can be found at
www.bosch-home.com and in the online shop
4XHVWLRQV"
ꢀꢉꢊꢂꢂꢉꢁꢇꢇꢉꢆꢁꢂꢇ
ZZZꢈERVFKꢉKRPHꢈFRP
ꢀꢁꢂꢀꢃ0DLQꢃ6WUHHWꢄꢃ6XLWHꢃꢅꢂꢂ
,UYLQHꢄꢃ&$ꢃꢁꢆꢅꢀꢇ
:HꢃORRNꢃIRUZDUGꢃWRꢃKHDULQJꢃIURPꢃ\RXꢋ
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Important information
Purchase information
Customer service
Your washer does not require any special care other than
the maintenance and care mentioned in this manual. If
you have a problem with your washer, please consult
Please take a moment to record the following basic
information about your new Bosch washer.
This information will be helpful in the event you need to
contact Customer Service or would like to order
accessories or replacement parts.
This may save you money. If a technician comes out to
advise you of information that is in the Troubleshooting
table you may be charged, even if your washer is still
under warranty.
(ꢀ1Uꢁ
)'
If service becomes necessary, contact your dealer or
installer or an authorized service center. Do not attempt
to repair the appliance yourself. Any work performed by
unauthorized personnel may void the warranty.
If you are having a problem with your washing machine
and are not pleased with the service you have received,
please follow these steps:
1. Contact your installer or the Authorized Service
Contractor in your area and explain to them why you
are not satisfied. This will usually correct the problem.
2. If after working with your installer or service technician
the problem still has not been resolved to your
satisfaction, please let us know either by writing to us
at:
BSH Home Appliances
1901 Mainstreet, Suite 600
Irvine, CA 92614
The E-Nr. (model number) and the FD (serial) number
are found on the rating plate label.
or calling us at:
1-800-944-2904
see illustration
The model number includes the slash and a two digit
number (eg: "/27"). Please be sure to include the final 2
digit number when filling in your model number. This
helps make sure any parts you may need are correctly
matched to your specific machine.
When writing or calling please have the following
information available:
▯ E-Nr. (model number, example: WTVC3300UC/27)
▯ FD (serial) number
Date of Purchase:___/___/_____
Where Purchased:___________________________
E-Nr. :_________/____ (ex: WFVC5330US/27)
FD :_______-_______ (ex: FD 9005| 90001)
▯ Date of Original Purchase (receipt required)
▯ Date Problem Occurred
▯ Explanation of Problem
If writing, please also include a daytime telephone
number and a copy of the sales invoice.
When calling Customer Service, please be ready to
provide the model number E-Nr. and FD (serial) number.
This information will help provide the best support for
your washer.
Additional information is available at our website.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Your washing machine is intended for
▯ Only household use and in a non-commercial
▯ The washer can be operated by people with reduced
environment.
physical, sensory or mental capabilities, and by people
with little experience or knowledge if they are
supervised or were trained by a responsible person.
▯ Household use only washing machine-washable
textiles
▯ Children may not do any laundry without supervision.
▯ Keep pets away from the washer.
▯ Washing with common cold and hot (maximum
140 °F/60 °C) tap water and commercially available
detergents and cleaning products suitable for use in
washing machines.
▯ Set-up conditions:
Ambient temperature: 32-104 °F/0-40 °C
Relative humidity: under 95%
▯ We recommended HE (High efficientcy) detergents
because they are designed to deliver optimum
performance from your front-loading washer. Not
using HE detergent could cause problems such as
oversudsing, extended cycle periods, or a decrease
in wash performance.
▯ Installation by qualified installers.
▯ Installation in accordance with all regulatory
requirements; if in doubt have the appliance installed
by a specialist familiar with these requirements.
Read the use and set-up instructions and all other
information included with the washer and act
accordingly.
NOTICE: Do not use chlorine bleach!
▯ When measuring all detergents/stain removers/
laundry care products be sure to follow the
manufacturer's instructions.
Keep documents for future use.
Importance and meaning of symbols
Important safety information is contained in this manual
and on the warning labels located on your washer.
Standard symbols and headings are used to identify
areas where you should take precautions to avoid injury
or damage. Please take a moment to become familiar
with each of these symbols and what they mean before
proceeding.
9
WARNING
WARNING
This indicates that death or serious injuries may
occur as a result of non-observance of this warning.
9
CAUTION
CAUTION
This indicates that minor or moderate injuries may
occur as a result of non-observance of this warning.
NOTICE: This indicates that damage to the appliance or
property may occur as a result of non-observance of this
warning.
Tip: This symbol is used to draw the user's attention to
important matters.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
9 IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
S
N
I
Y
T
E
F
A
S
T
N
A
T
R
O
D
P
A
M
E
RI
D
N
A
E
V
A
S
E
S
E
H
T
S
N
O
I
T
C
U
R
T
S
N
I
▯ Always unplug the washing machine from the power
supply before attempting any service. Disconnect the
power cord by grasping the plug, not the cord.
▯ Do not machine wash fiberglass materials (such as
curtains and window coverings that use fiberglass
materials). Small particles may remain in the washing
machine and stick to fabrics in subsequent wash loads
causing skin irritation.
WARNING
When properly cared for, your new appliance has been
designed to be safe and reliable. Read all instructions
carefully before use. These precautions will reduce the
risk of burns, electric shock, fire, and injury to persons.
When using appliances, basic safety precautions must
be followed, including those in the following pages.
▯ Do not install or store the washer where it will be
exposed to the weather. Hoses and internal parts may
be damaged if exposed to freezing temperatures.
Examine the appliance after unpacking it. In the event of
transport damage, do not plug it in.
▯ Do not use the washing machine if it has a worn power
cord or loose plug.
▯ The washing machine must only be used for its
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,
SERIOUS INJURY OR DEATH WHEN USING YOUR
WASHING MACHINE, FOLLOW BASIC PRECAUTIONS
INCLUDING THE FOLLOWING
▯ Bosch washers are provided with an Operating, Care
and Installation Instruction manual. Read and
understand all instructions before using the washing
machine.
▯ Do not wash articles that have been previously
cleaned, washed, soaked, or spotted with gasoline, dry
cleaning solvents, other flammable or explosive
substances as they give off vapors that could ignite or
explode.
intended purpose.
▯ Always
follow
the
fabric
care
instructions
recommended by the clothing manufacturer.
▯ Make sure all water connections to the washing
machine have shut-off valves that are readily
accessible during normal operation of the washer. Turn
off both valves during periods in which the washer is
not in use and before leaving for extended periods
such as vacations to reduce the risk of water damage
in the event of a leak. Turn the valves back on prior to
resuming use of the washer.
▯ Do not operate the washing machine if parts are
missing or broken.
▯ Do not add gasoline, dry cleaning solvents, or other
flammable or explosive substances to the wash water.
These substances give off vapors that could ignite or
explode.
▯ Do not operate the washing machine until you are sure
that:
- the washing machine has been installed according
to the Installation Instructions.
▯ Under certain conditions hydrogen gas may be
produced in a hot water system that has not been used
for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE.
If the hot water system has not been used for this
length of time, turn on all hot water faucets and let the
water flow out of each faucet for several minutes before
using the washing machine. This will release any
accumulated hydrogen gas. As the gas is flammable,
do not smoke or use an open flame while carrying out
this procedure.
- all water, drain, power and grounding connections
are in compliance with all local regulations and/or
other applicable regulations and requirements.
▯ See the installation instructions in this manual for
grounding requirements.
▯ Before the appliance is removed from service or
discarded, remove the door to prevent children from
playing or hiding inside. Also remove the power cord/
plug.
▯ Do not allow anyone to climb, lean or hang on any part
of the washer including any protruding components
such as the appliance door or a pullout shelf.
▯ Use caution when draining hot water from the washer
drum such as during pump maintenance or when using
the emergency door open procedure.
▯ Do not reach into the appliance if the wash drum is
moving.
▯ Do not tamper with the controls.
▯ Do not repair or replace any part of the appliance or
attempt any service unless specifically recommended
in the user manual or in published user repair
instructions that you understand and have the skills to
carry out.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
9 IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
S
N
I
Y
T
E
F
A
S
T
N
A
T
R
O
D
P
A
M
E
RI
D
N
A
E
V
A
S
E
S
E
H
T
S
N
O
I
T
C
U
R
T
S
N
I
WARNING
WARNING
WARNINGS FOR CHILDREN
STATE OF CALIFORNIA PROPOSITION 65 WARNINGS
▯ Do not allow children to play on or in the appliance.
Close supervision of children is necessary when the
appliance is used near children.
This product contains chemicals known to the State of
California to cause cancer, birth defects or other
reproductive harm.
▯ Make sure to utilize all child lock/safety features of your
appliance, and be sure to turn the appliance Off when
not in use.
SAVE THESE INSTRUCTIONS!
▯ Appliances are not intended for use by children,
however when children become old enough to operate
the appliance, it is the responsibility of the parents or
legal guardians to ensure they are instructed in safe
practices by qualified persons.
Keep These Instructions for Future Reference
In case of change of ownership, manual should be
conveyed with the washer.
▯ Keep all laundry aids (including detergents, bleach,
fabric softener, etc.) out of the reach of children.
Introduction to your new washer
9
WARNING
Web Site
RISK OF FIRE, ELECTRIC SHOCK OR INJURY
information and to view a selection of our products.
To reduce the risk of fire, electric shock or injury to
persons, read the IMPORTANT SAFETY
INSTRUCTIONS of this manual before installing or
operating this appliance.
About this manual
These operating and installation instructions may apply
to more than one model of washer. Illustrations used
may show details that differ from your particular model.
Read your user manual. It contains valuable information
about safety, installation and operation of your new
appliance.
This can save you time, make it easier to correctly install
and use your washer, and improve your overall
satisfaction with your new appliance.
Standard features and helpful information
Thank you for choosing Bosch for your laundry
appliance needs.
Please read and follow the use & care, important safety
instructions and troubleshooting information contained in
this manual. Please retain this manual for future
reference.
Special features
▯ Load adjust matches the water and power
consumption to each cycle according to the amount of
laundry sensed in the drum and the type of fabric.
Standard features
▯ 17.7 lb (8 kg) large drum capacity (for regular cotton
The load adjust function runs automatically to keep
energy and water consumption as low as possible.
loads).
The water level sensor ensures the water level is
correct for the laundry and the cycle selected.
▯ Low washing and spinning noise levels.
▯ Large door opening featuring magnetic lock, 180º
▯ The automatic unbalanced load detection system
spins the laundry several times to ensure even
distribution.
opening angle.
Quality tested
If the laundry is unevenly distributed, the spin speed is
reduced, or the laundry may not be spun for reasons
of safety.
In the Wool cycle, the spin cycle is attempted only
twice in order to prevent felting.
Every Bosch washer is thoroughly tested before leaving
the factory. As a result, a small amount of residual water
may remain in the washer drum. We recommend running
the Maintanance cycle to remove this water prior to
washing your first load of laundry.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
▯ Save energy and detergent when washing lightly and
Environmentally friendly use of your
washer
Your new Bosch washing machine is designed to use
water, energy and detergent in a highly efficient way to
help reduce operating costs, conserve resources and
protect the environment.
normally soiled laundry.
▯ Energy-saving mode: The display panel lighting goes
out after a few minutes and Start/Pause flashes. To
activate the display, press any button.
Energy-saving mode is not activated if a program is
running.
▯ Utilize the maximum amount of laundry for the
▯ If the laundry will be dried in a dryer afterwards, select
spin speed according to the dryer manufacturer’s
instruction.
appropriate cycle.
▯ Avoid using too much detergent.
▯ Wash normally soiled laundry without a prewash.
Dimensions and clearances required
Appliance dimensions
Length of power cord and water supply
hoses
D
E
To left of washer* To right of
washer*
U.S.
Metric
U.S.
Metric
Electric power 51 in.
cord
130 cm 47 in.
135 cm 33 in.
94 cm 55 in.
119 cm
Water supply 53 in.
hoses
84 cm
Drain Hose
37 in.
140 cm
F
* Facing the front of the washer
Installation types
Stacked washer and dryer
A Bosch dryer of the same dimensions can be placed on
top of the washer to save space.
G
Use the special washer-dryer sets which can be obtained
from customer service or your local dealer (see the dryer
user manual).
ꢂꢃꢁƒ
ꢀꢁƒ
H
%
Label
Dimension
U.S.
Metric
60 cm
64 cm
(
a
b
width
23.6 in.
25 in.
depth
(to front of door)
height (minimum*)
height (maximum*)
side clearance
(door open 180°)
depth
+
c
d
e
33.2 in.
33.8 in.
15.8 in.
85 cm
86 cm
40 cm
42.5 in.
108 cm
*
(door open 90°)
Weight approximate
169.8 lbs. 77.2 kg
&
* height of appliance depends on the extension of the
height adjustable appliance feet.
$
'
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Under counter (Preferred)
Clearance requirements (Minimum)
A Both Sides
0.6 in.
6.3 in.
3.2 in.
3.4 in.
1.5 cm
16 cm
8 cm
B
C
D
Top
Rear*
Front
8.5 cm
* Rear clearance as close to wall as venting or water
connection will allow. If the washer is installed with a
dryer, the greater rear clearance for the dryer venting is
required for the laundry pair.
Ventilation area (Minimum)
E
F
Top
63 sq. in.
63 sq. in.
404 sq. cm
404 sq. cm
$
%
&
Bottom
Vent spacing (actual not minimum dimensions)
G
H
J
37 in.
26 in.
3 in.
94 cm
66 cm
7.6 cm
73 cm
Front of the appliance fully open.
No doors or coverings.
K
29 in.
Minimum opening dimensions
Stand alone (shown) or Side-by-Side
A
B
C
23.8 in.
23.8 in.
33.5 in.
60.5 cm
60.5 cm
85 cm
Under counter (Less Desirable)
(
.
&
+
-
$
)
*
'
If front of the appliance is covered ventilation openings
must be installed.
E & F are minimum area sizes
E
63 sq.in.
63 sq.in.
404 sq.cm
404 sq.cm
F
G & H
actual spacing dimensions for min. open area sizes
G
H
3 in.
7.6 cm
14 in.
35.6 cm
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation instructions
Tools needed
9
WARNING
The following tools may be helpful during installation of
your washer.
RISK OF FIRE, ELECTIRICAL SHOCK OR INJURY
TO PERSONS
To reduce the risk of fire, electric shock or injury to
persons, read the Important Safety Instructions at
the front of this manual before installing or operating
this appliance.
9
CAUTION
WASHING MACHINE IS HEAVY
Use additional help and care when lifting and
positioning.
▯ 13mm socket for removing the transport bolts.
▯ 17mm wrench for adjusting the appliance feet.
▯ Bubble level for leveling the appliance.
Introduction
Waste disposal
Disposal of Packaging Materials
After unpacking your new appliance dispose of the
protective packaging materials in an environmentally
friendly way. Ask your dealer or inquire with your local
authority regarding currently acceptable means of
disposal.
Read these installation instructions completely and
carefully before starting to install your new washing
machine. The information contained can save you time
and effort and will help to ensure optimum performance
of your new washer. Be sure to observe all warnings and
cautions.
NOTICES
▯ Frozen hoses can tear or burst. Do not install the
washing machine outdoors or in an area exposed to
freezing condtions.
9
WARNING
WARNINGS FOR CHILDREN
Do not let children play with packaging and
associated parts to avoid risk of choking or
suffocation.
▯ If the washing machine is located in a room which will
be exposed to temperatures below freezing, or if it is
located in a cabin that is being shut down for the
winter, any residual water in the pump or water inlet
hose(s) must be drained.
Disposal of Your Old Appliance
▯ Take care not to damage the washing machine. Do
Your old appliance can be recycled if it is no longer to be
used. Prior to disposing of your old appliance observe
the following precautions to reduce safety risks.
not hold on to protruding parts (e.g. door) when lifting.
▯ In addition to the safety information listed here, the
local water and electricity supplier may have special
requirements.
9
WARNING
▯ If in doubt, have the appliance connected by an
TO AVOID RISK OF INJURY OR DEATH, DO THE
FOLLOWING
authorized technican.
- after unplugging the old appliance, remove the
electric power cord and dispose of properly.
- remove the door or permanently disable the door
lock to prevent children from being locked inside.
These installation instructions are intended for use by
qualified installers. In addition to these instructions, the
installation must comply with:
- for the United States - National Electrical Code, ANSI/
NFPA70 - and latest editions of the State and municipal
and/or local regulations.
- for Canada - Canadian Electrical Code C22.1 - and the
latest editions of the Provincial, Municipal and/or local
regulations.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts provided with your washer
Back side of the washing mashine
Hot water connection
Cold water connection
H
P
NOTICE: If any parts are missing please notify your
dealer immediately.
Set up on a pedestal with drawer
Pedestal item number: WMZ 20490
ꢀ
Mount washer on the pedestal according to the
instructions in the installation kit.
ꢁ
ꢂ
Installation checklist
Review the following list and check off each step as it is
completed during installation.
Installation Step
Page
è
plete the base installation before
removing the transportation bolts
#
Completely remove all four shipping
bolts keeping the bolt and bushing
assemblies intact
Connect the water supply hose and
drain hose
Connect the electrical power
Slide the washing machine into its final
location
Power cord with plug
Literature pack; contents:
▯ User manual
(
0
possible)
nance cycle
▯ Warranty
▯ Covers with hose holders
Drain hose
8
@
Elbow to form the hose to fit the drain pipe
Importance of installing on a solid, level
floor
Washer drum contents
Your new Bosch washing machine utilizes high spin
speeds to achieve superior water removal from your
laundry resulting in reduced drying time. It is important to
install your washing machine on a floor that will provide
firm support. This prevents the washer from experiencing
excess vibration during spinning that could cause the
washer to move or be noisy.
2 water supply hoses are shipped in the washer drum.
Be sure to remove each of these items from the drum
before using the washer.
The installation surface must be solid and level in both
directions. Avoid installing your washer on soft surfaces
such as floors with carpet or foam backed covering
material.
If installing the washer on a wooden floor, observe the
following:
▯ install the washer in a corner for better support if
possible.
▯ if necessary, reinforce the floor by screwing a water
resistant wooden board to the floor (minimum of
1.18 in./30 mm thick).
▯ secure the front feet of the washing machine with
holding brackets. A set of holding brackets can be
obtained from a specialist store or from Customer
Service (part number WMZ 2200).
+
3
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Remove the transport bolts
9
CAUTION
DAMAGE TO THE APPLIANCE
▯ The machine is secured for transport with
transport bolts.
Transport bolts that are not removed can damage
the drum during operation of the machine, the
washer will vibrate, and it will be much noisier
during spin cycles if the transport bolts are not
removed before use.
Be sure to remove all 4 transport bolts
completely before first use. Keep the transport
bolts.
NOTICE: Keep the assemblies together and store them
for later use such as when moving the washer.
If a pedestal was purchased with the washer, it
must be installed first, prior to removing the
transport bolts. Please consult the pedestal
installation instructions.
▯ In order to prevent transport damage during later
transport, be sure to re-install the bolts before
transport.
1. Remove hoses from the brackets.
Water connections
Water supply hose connections
NOTICES
▯ The washing machine must only be operated with cold
and hot (max. 140 °F/60 °C) tap water. Do not
connect the appliance to the mixer tap of a
pressurized hot-water boiler.
▯ To prevent water damage, the hot and cold water
valves should be accessible when the washing
machine is in place and should always be turned off
when the washing machine is not in use.
2. Loosen and remove all 4 transport bolts.
Remove the sleeves. Take the power cable out of the
brackets.
▯ If installing the washing machine in a new building or a
building in which the plumbing system was recently
installed or upgraded, flush the lines before installing
the washing machine to remove any sand, dirt or
residue.
▯ To prevent leakage or water damage, follow the
instruction in this chapter.
▯ If in doubt, have the appliance connected by a
technican.
Connect your washer to the wall faucets using the
included AquaSecure water supply hose.
Observe each of the following:
3. Place covers over the transport bolt holes
Four plastic covers are provided in the small parts bag
included with your washer. Separate these covers and
install one in each hole where the transport bolts were
removed.
▯ Only use the new water supply hose shipped with your
washer. Never connect old used hoses.
▯ The water supply hoses must not be kinked, bent or
flattened in such a way as to potentially diminish water
flow.
Lock covers firmly by pressing on the snap hook.
Insert hose holder. Secure hoses in the hose holders.
▯ The water supply pressure must be between 14,5 to
145 psi (1 - 10 bar) with a minimum of 2.2 U.S. gallons
(8 liters) of flow per minute. A pressure regulator valve
must be installed if the maximum water pressure is
exceeded.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
▯ Make sure the water supply faucet is easily accessible
when the washer is in use. The faucet should be
turned off if the washer is going to be unused for
extended periods of time.
About the AquaSecure Hose
▯ Make sure rubber washers are in place at both ends of
the water supply hose. Missing washers could cause
leaks.
▯ The connection points are under full water pressure.
Turn on the water tap and check for leaks.
▯ Periodically inspect the water supply hose and replace
with a new hose if cuts, kinks or leaks are observed.
The AquaSecure hose prevents potential flooding in the
event the hose develops an internal leak. If the hose
leaks, the indicator turns red and water flow is blocked.
Water drain hose connection
NOTICES
▯ Do not reuse an old drain hose. Only use the drain
hose and parts included with your washer.
▯ Do not kink or modify the water drain hose.
Height of drain point
Height difference between the floor and drainage point:
max. 39 in. (100 cm).
Water connection hoses
▯ red - Hot water-hose
▯ blue - Cold water-hose
Types of drainage hookups
Standpipe
GUDLQꢅ
SLSH
PD[ꢄꢅꢀꢁꢅƒꢅ
PD[ꢄꢅꢀꢁꢅƒꢅ
FDEOHꢅWLH
Attach this end to water tap. Hand tighten only.
Attach the drain hose using the elbow included with your
washer.
Fit the drain hose to the elbow provided leaving a
maximum of 4 inches of drain hose projecting. Insert this
section of the drain hose into the drain pipe. Secure the
elbow and hose with a nylon tie strap or the equivalent to
keep the hose from coming out of the drain pipe during
use.
Sink siphon
Attach this end of the hose to the back of the washing
machine. Hand tighten only.
Secure the drain hose to the sink siphon using a Ø 0.9 -
1.6 in. (20-44 mm) hose clip (available from a hardware
store).
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Wash Basin
WARNING
4. Use a bubble level to check the top of the washer to
make sure it is level side to side and front to rear.
5. Press down on each corner of the washer top to make
sure the washer doesn’t “wobble“. There should be no
"give" or movement. All four washer feet should press
equally against the floor. This is just as important as
the washer being level to prevent vibration.
9
SCALDING
When washing at high temperatures, there is a risk
of scalding if you touch hot suds, e.g. when
pumping out hot suds into a wash basin.
6. When the washer is level and does not wobble, lock
the washer feet in place by tightening the locknuts
against the washer bottom. Be sure to do this without
changing the height of the foot (hold the foot while
tightening the locknut).
Do not reach into the hot suds.
9
CAUTION
Procedure for adjusting the washer feet:
APPLIANCE DAMAGE/DAMAGE TO TEXTILES
If the end of the drain hose is dipped into the
pumped-out water, water can be sucked back into
the appliance and can damage the appliance/
textiles.
Make sure that:
▯ The sealing plugs do not seal the drain of the wash
basin.
▯ The end of the drain hose does not dip into the
pumped-out water.
▯ The water flows out fast enough.
1. After determining which washer feet need to be
extended, have someone lift up on the washer slightly
to take pressure off the foot to be adjusted.
2. Turn the grey plastic foot to extend it downward as far
as necessary to raise the corner of the washer the
correct amount to level the washer.
3. When the height of the foot is correct, use a 17 mm
open end wrench to tighten the locknut against the
washer bottom. The locknut should be tight against the
bottom of the washer to lock the foot in place.
Electrical connection
9
WARNING
ELECTRICAL SHOCK
Attach the drain hose securely to the wash basin.
Improper connection of the ground may result in
electric shock. Have the appliance checked by a
qualified technician or licensed electrician if you are
in doubt as to whether the washer has been
properly grounded.
NOTICE: In any multi-story installation, the washer
should be installed on a drained floor to prevent water
damage to rooms below in the event of a leak.
Leveling the washer
Importance of leveling the washer
Your new washer uses high spins speeds to remove
water at the end of the wash cycle. It is important that
your washer is level and that all four washer feet press
with equal pressure against the floor. This will help
assure the quietest, most vibration-free use of your
washer.
9
WARNING
ELECTRICAL SHOCK
To reduce the risk of fire or electrical shock, DO
NOT use an extension cord or an adapter to
connect the washing machine to the power supply.
Follow these steps:
1. Install the washer on a level and solid surface,
preferably in a corner of a room.
9
WARNING
2. If the floor is uneven (or unlevel) adjust the washer feet
as required to level the washer. Do not place anything
under the washer feet to help level the washer.
ELECTRICAL SHOCK
To reduce the risk of electrical shock:
▯ Only pull out the main cable by the plug and
never by the cable, as this could damage it.
▯ Never touch or hold the main plug with wet
3. Extend the washer feet no more than is necessary. The
more the feet are extended, the more vibration the
washer will experience. Start with the washer feet
turned all the way in and adjust each foot as
necessary.
hands.
▯ Never unplug the main plug during operation.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Grounding Instructions
z. Only this symbol can guarantee compliance with
all current regulations.
This appliance must be grounded. In the event of
malfunction or breakdown, grounding will reduce the risk
of electric shock by providing a path of least resistance
for the electric current. This appliance is equipped with a
cord that has an equipment grounding conductor and a
grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded
in accordance with all local codes and ordinances.
Transporting the washer
Before transporting the washer
1. Disconnect the washer power cord from the wall
outlet.
2. Turn off the water supply to the washer.
3. Disconnect water supply lines from the tap.
4. Disconnect the drain hose from the drain location.
5. Install the transport bolt assemblies as shown below.
Important Points
▯ Do not modify the plug provided with the appliance. If
the plug will not fit into the outlet have a properly
grounded outlet installed by a qualified electrician. Do
not cut, remove or bypass the grounding prong on the
washer power cord plug.
Remove the transport bolt hole covers
▯ The washer power cord plug must be easily
accessible when the washer is operating.
▯ When unplugging or plugging in the washer power
cord, grasp the plug. Do not pull on the power cord to
unplug the washer.
▯ The household electrical supply must be suitable for
the voltage specification shown on the washer rating
plate (located inside the washer door, immediately
below the drum opening).
See the table below for connection specfications and
fuse/breaker requirements.
1. Remove all four transport bolt hole covers.
2. Pull the tip of the arrow on the cover out slightly to
disengage the locking tab.
Volts
Hertz
Ampers
Watts
3. Rotate the cover counterclockwise to remove. Repeat
for all 4 transport bolt hole covers.
208 - 240
60
12
2.880 max.
Insert the transport bolt assemblies
▯ The wiring for the electrical outlet circuit must be
sufficient to meet the appliance requirements. Use of a
Ground Fault Circuit Interrupter (GFCI) is
recommended.
▯ Protect the power cord from physical damage, such as
being twisted, kinked, pinched, caught in a door, or
walked upon.
▯ If the power cord is damaged, it must be replaced by a
qualified person to avoid a fire/shock hazard.
Replacement power cords are available through
Customer Service.
1. Each assembly consists of a plastic bushing and a
bolt that extends through the bushings. Unscrew the
bolt until the threaded end is flush with the end of the
plastic bushing.
▯ The washing machine must only be connected to an
individual branch circuit via a socket which has been
properly installed and grounded.
2. Insert the transportation bolt and bushing assembly as
shown. The metal housing slides around the bolt
through the slot in the plastic bushing as the bushing
is slid into place. The open part of the bushing slot
should be facing the direction shown to allow the
assembly to slide fully into place.
▯ Make sure that:
- the power plug fits into the socket
- the wire size is sufficient
- the grounding system is properly installed:
▯ The power cord may be replaced by an electrican
only. Replacement power cords are available from
Customer Service. To reduce the risk of fire or
3. When the bolt is in place screw it in until the bolt
threads engage the drum. Double check and ensure
bolts are screwed into threaded holes and not into
adjecent cracks or crevices. Repeat the process for all
4 transportation bolt assemblies before tightening any
all the way. Complete tightening all 4 bolt assemblies
until they are each snug in place.
electrical shock, DO NOT use an extension cord or an
adapter to connect the washing machine to the power
supply. If a ground fault circuit breaker is to be used,
only use the types marked with the following symbol:
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting to know your appliance
Control panel
+
ꢀ
ꢁ
ꢂ
#
Display field
Temp. selection, Spin Speed, Delay-Start
(
0
8
To change the default cycle settings.
ꢀ ꢁ ꢂ
#
+
Indicator lamp lights up if the setting is active.
Easy Iron, Extra Rinse, Prewash/Pre Treat
Additional option settings.
Indicator on = setting is active.
Start/Pause
▯ starts or pauses the selected cycle
▯ lit steady - cycle running, can be paused
▯ blinking - settings can be changed; cycle can
be started; door is locked (water may be hot);
cycle is in Pause mode
Selectable temperature ranges
Extra hot, Hot, Warm, Cold
(
0
8
Cycle Selector for selecting a cycle and on/off
switch;
@
H
Selectable spin speed ranges
High, Medium, Low, No spin
turns in both directions.
Display field for settings and information.
4 Digit Display:
▯ delay start-time
adjustable in 1h (hours) steps to 24 hours
▯ cycle duration
for example 2:40 (hours:minutes)
Cycle status sequence
@
H
P
Child lock
Indicator lamps for additional option settings
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Laundry
Preparing the laundry
Determining degree of soiling
▯ Light soiling
NOTICE: Damage to the appliance/fabrics
No visible soiling or stains, but may have absorbed
some body odor. This could include light weight
summer clothing such as T-shirts, shirts, or blouses
worn for only one day. Also to freshen bed linen or
guest towels.
Foreign objects (e.g. coins, paper-clips, needles, nails)
may damage the laundry or components in the washing
machine.
Therefore, note the following tips when preparing your
laundry:
▯ Normal soiling
Visible soiling and/or a few light stains. This could
include clothing such as T-shirts, shirts, or blouses that
have been sweated in or worn several times. Also tea
towels, hand towels or bed linen used for up to one
week. Net curtains (without nicotine stains) that have
not been washed for up to a half year.
▯ Heavy soiling
Visible soiling and stains. This could include kitchen
towels, fabric napkins, baby bibs, children’s outer
clothing or football jerseys and shorts stained with
grass and/or earth. Also could include working clothes
such as overalls and jeans and other clothing worn for
outside work and activities such as gardening, home
and yard maintenance or worn during sports activities.
▯ Empty all pockets to ensure no loose debris (coins,
keys, other hard objects) are placed in the washer
drum.
▯ Close any fasteners (such as zippers and hooks) that
could cause laundry to catch or become entangled.
▯ Remove any foreign objects or non-washable parts.
Identifying and treating stains
▯ Turn trousers and knitted wear inside out prior to
Oils and grease: normal body skin oil,
cooking oils/fats, sauces, mineral oil, or
wax (containing fat/oil). Treatment: scrape
residue from fabric. Pretreat. Wash using
hottest water safe for the fabric. For heavy
stains, apply non-flammable dry cleaning
fluid to back of stain, replacing towels
under stain frequently. Rinse thoroughly
and wash using hottest water safe for the
fabric.
washing.
▯ Place small items (such as socks and handkerchiefs)
and underwired bras into a mesh bag prior to washing.
Sorting the Laundry
Sort laundry items according to color, degree of soiling
and recommended wash temperature range.
Beverages and juices: tea, coffee, red
wine, fruit, vegetables. Treatment: Pretreat
stain. Wash using cold water.
Proteins and carbohydrates: blood, egg,
milk, starch. Treatment: Rinse immediately
in cold water. If stain remains, soak in cold
water with an enzyme prewash.
Wash white items separately from colored items.
Otherwise, white items may tend to become grey.
Soot, earth, sand (pigments), red clay
(such as soiling of tennis clothing). Brush
off residue if present. Pretreat or soak with
a laundry product containing enzymes.
Observe laundry care labels
H[WUDꢂKRW KRW
ZDUP
FROG
Removing stains
▯ Remove/pretreat stains as soon as possible after they
have occurred.
▯ Dab with a soapy solution. Do not rub.
▯ Select an appropriate wash cycle and wash the item.
Several washing cycles may be required in order to
remove stubborn or dried-in stains.
Check the care labels on each laundry item prior to
washing. Choose an appropriate wash cycle that does
not exceed the temperature recommended.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Laundry detergents and additives
▯ Detergent for woollens
Adding the correct amount of HE detergent
Suitable for wool
Wool program: Cold - Warm
9
WARNING
WARNING
Saving energy and detergent
For light and normal soiling, you can save energy (lower
washing temperature) and detergent.
To avoid risk of poisoning, keep detergents and
cleaning products out of the reach of children.
Saving
Soiling/note
Avoid overuse of detergent.
Measure out the detergent according to:
Reduced tem-
perature and
detergent
quantity as
per the rec-
ommended
dosage
Light e.g.:
▯ Light summer/sports clothing
▯ The amount of laundry.
(worn for a few hours)
▯ The degree of soiling.
▯ T-shirts, shirts, blouses (worn
for up to one day)
▯ Guest bed linen and hand
▯ The water hardness. This information can be obtained
from your local water authority. Soft water requires less
detergent.
towels (used for one day)
No visible dirt or stains. Clothing
has taken on some body odour.
Normal e.g.:
Too much detergent
▯ T-shirts, shirts, blouses (sweat
▯ Excessive foam will reduce washing agitation and
soaked, worn a few times)
cause poor washing and rinsing results.
Temperature
as per the
care label and
detergent
quantity as
per the rec-
ommended
dosage for
heavy soiling
▯ Towels, bedding (used for up
to one week)
Visible dirt or a few light stains.
▯ Not environmentally compatible (wastes detergent and
is not good for the environment).
Too little detergent
Heavy
Dirt and/or stains clearly visible,
e.g. tea towels, baby items, work
clothing
▯ Laundry will not be washed clean.
▯ Eventually the laundry will take on a grey and hard
appearance. Greyish-brown grease spots may stain
the laundry, heating elements may begin to calcify.
NOTICE: When measuring the amount of all detergents/
additives/care products and cleaning agents, please
always check the manufacturer's instructions and
information.
The fabric care label is important for selecting the correct
detergent, temperature and treatment of the laundry.
If desired you can visit the following sites for additional
information on detergents and fabric care.
▯ Standard detergent with optical brighteners
Suitable for boil-washable white laundry made from
linen or cotton
Program: Cottons / Cold - Extra hot
▯ Detergent for colours without bleach or optical
brighteners
Suitable for coloured laundry made from linen or
cotton
Program: Cottons / Cold - Hot
▯ Detergent for colours/delicates without optical
brighteners
Suitable for coloured laundry made from easy-care
fibres, synthetic fibres
Program: Easy-Care / Cold - Hot
▯ Detergent for delicates
Suitable for delicate, fine fabrics, silk or viscose
Program: Delicate/Silk / Cold - Hot
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Cycle selection table
Cycles
max.
Load
up to:
selectable cycle settings, Type of laundry
default settings (bold)
additional cycle settings ;
Information
Temperature Spin speed
Cotton Normal full load Extra hot
High
Medium
Low
Sturdy fabric, cotton or linen
fabric that withstands very hot wash/Pre Treat
water
Easy Iron, Extra Rinse, Pre-
Hot
Warm
Cold
No spin
High
Medium
Low
Sanitary
full load Extra hot
Sturdy fabric, cotton or linen
fabric that withstands very hot wash/Pre Treat ;
water
Easy Iron, Extra Rinse, Pre-
Hot
longer wash and rinse with
more water for especially sen-
sitive skin
Warm
Cold
No spin
Quick Wash 30 1/2
Hot
High
Easy-care fabrics made of cot-
ton, linen, synthetic fibres or
blended fabrics ;
min
load
Warm
Cold
Medium
Low
suitable for slightly-soiled laun-
dry
No spin
Delicates
1/3
Hot
Medium
Low
No spin
for delicate, washable fabrics, Easy Iron, Extra Rinse, Pre-
e.g. made of cotton, satin, syn- wash/Pre Treat ;
load
Warm
Cold
thetic fibres or blended fabrics
spinning only between rinse
(e.g. curtains) ;
cycle
bulky items (e.g. comforters)
Jeans
1/2
Hot
High
dark cotton textiles and dark Easy Iron, Extra Rinse, Pre-
easy-care textiles;
wash/Pre Treat
load
Warm
Cold
Medium
Low
Wash textiles inside-out.
No spin
Medium
Low
Active Wear
1/3
Hot
Fabric for outdoor wear
Extra rinse with spin
Easy Iron, Extra Rinse, Pre-
wash/Pre Treat
load
Warm
Cold
No spin
High
Medium
Low
Rinse
full load
full load
Easy Iron, Extra Rinse
Easy Iron
Spin/Drain
Extra spin with selectable
speed
No spin
If this cycle should only drain,
set the spin speed to No spin.
Maintenance
empty
Medium
special cycle for cleaning the default temperature: Extra
drum
hot ; not visible in the display
field and not possible to
change the temperature.
Low
Woolens/Hand- 1/3
Warm
Cold
Medium
Low
Hand and machine washable Especially gentle washing
wash
wool/wool blend fabrics
cycle to avoid shrinkage, long
cycle pauses (clothing rests in
sudsy water)
load
No spin
Anti shrink
Towels
1/3
Hot
Medium
Low
non-iron shirts/blouses of cot- Easy Iron, Extra Rinse, Pre-
ton, linen; synthetic or mixed wash/Pre Treat
materials
load
Warm
Cold
No spin
High
Medium
Low
1/2
Extra hot
Hot
durable, boil-proof cotton tow- Extra Rinse, Prewash/Pre
els ;
Treat
load
especially soft towels
Warm
Cold
No spin
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Cycles
max.
Load
up to:
selectable cycle settings, Type of laundry
default settings (bold)
additional cycle settings ;
Information
Temperature Spin speed
Whitest/Whites full load Extra hot
High
Medium
Low
White sturdy fabric, cotton or Easy Iron, Prewash/Pre Treat
linen fabric that withstands
very hot water
Hot
Warm
Cold
No spin
High
Medium
Low
Heavy Duty
Perm Press
Tips
full load Extra hot
For heavily to lightly soiled
(white) cottons, household lin-
ens, work and play clothes.
Easy Iron, Prewash/Pre Treat
Hot
Warm
Cold
No spin
High
Medium
Low
1/2
Hot
Cotton, linen synthetic or
blended fabrics
Easy Iron, Extra Rinse, Pre-
wash/Pre Treat ;
load
Warm
Cold
reduce rinse and final spin
cycle
No spin
Do not wash new multicolored laundry together with other laundry.
The cycles are time-controlled for lightly soiled fabrics. If fabrics are heavily soiled, reduce the load or select, e.g. Pre-
wash/Pre Treat.
Rinse cycles use cold water only.
For cycles with pre-wash, divide detergent into chamber I and II.
Starching
NOTICE: Laundry must not be treated with fabric
softener.
Starching is possible in all wash programs if liquid starch
is used. Measure starch into compartment M in
accordance with the manufacturer's instructions (clean
first if necessary).
Dyeing/bleaching
Dye should only be used in normal household quantities.
Salt may damage stainless steel. Always follow the dye
manufacturer's instructions.
Do not use the washing machine to bleach clothes.
Soaking
1. Pour soaking agent/detergent into compartment II in
accordance with the manufacturer's instructions.
2. Turn the program selector to Cotton Normal Cold
program.
3. Press Start/Pause.
4. After approx. ten minutes, press Start/Pause.
5. After the required soaking time, press Start/Pause
again to continue or change the program.
NOTICES
▯ Load laundry of the same color.
▯ No additional detergent is required; the soaking
solution is used for washing.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Default cycle settings
At the factory, a temperature range, spin speed range,
and cycle duration ("Finish at" time) are pre-set for all
cycles.
After selection of the cycle, these values are displayed in
the display field.
Delay Start
When you select a cycle, the duration of the cycle in
question is displayed.
Before the cycle start, the cycle end ("Finish at" time) can
be pre-selected in one-hour steps (h=hour) up to a
maximum of 24h.
You can change the default settings as follows.
Press the Delay Start button until the desired setting is
displayed.
Changing the temperature range
Before and during the cycle, you can change the default
temperature range depending on the cycle progress.
NOTICE: The cycle duration is included in the set "Finish
at" time.
Press the appropriate button until the desired setting is
displayed.
The maximum temperature range that can be set
depends on the cycle selected.
After the start, the pre-selected time, e.g. 8h is displayed
and counted down until the wash cycle begins. Then the
cycle duration, e.g. 2:40 (hours:minutes) is displayed.
Changing the pre-selected time:
If the “Delay Start” function has been activated and
before the wash cycle has started, you can change the
delay time as follows:
Changing the spin speed range
Before and during the cycle, you can change the spin
speed range depending on the cycle progress.
1. Press Start/Pause.
Press the appropriate button until the desired setting is
displayed.
No spin setting: Rinse stop = without final spin, the
laundry remains in the last rinse water.
2. Press the Delay Start button until the desired number
of hours is displayed.
3. Press the Start/Pause button
NOTICE: The cycle duration is adjusted automatically
when the cycle is running. Changes to the default cycle
settings or cycle settings also cause changes in the
cycle duration.
The maximum speed range that can be set depends on
the cycle selected.
Additional program settings
Extra Rinse
Auxillary rinse cycle. Longer cycle duration. For areas
with very soft water or for further improvement of rinse
results.
Easy Iron
Special spin cycle with final loosening up of laundry.
Delicate final spin - moisture remaining in the laundry is
slightly increased.
Prewash/Pre Treat
For heavily soiled washing. Pour detergent into
dispensers I and II.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
Using the cycle selector to choose a wash
cycle
NOTICE: If you have activated the child lock, you must
deactivate it before you can set a cycle.
Use the cycle selector to select the desired cycle. Turns
in both directions.
9
WARNING
WARNING
To reduce the risk of fire, electric shock, or injury to
persons, read the Important Safety Instructions and
Operating Instructions before operating this
appliance.
The machine is switched on.
In the display field, the cycle duration for the selected
cycle appears and the indicator lamps for the pre-set
temperature and spin speed range light up.
Before doing any laundry with your washing
machine
Check to make sure your washer has been installed
properly by following the installation instructions in this
manual.
Changing default cycle settings
You can use the default settings or change the default
settings.
Press the appropriate button until the desired setting is
displayed.
9
WARNING
The settings are active without confirmation.
They are not retained after the appliance is switched off.
WARNING
Before installing or using your washing machine
read and follow all installation and operating
instructions.
Selecting additional cycle settings
By selecting additional settings, you can adjust the
washing process still better to suit the items you are
washing.
The settings can be selected and deselected depending
on the cycle progress.
The indicator lamps of the buttons light up if the setting is
active.
Check the machine. Never start a damaged machine!
Contact your customer service!
Check to be sure your household electrical system
voltage and the voltage specifications on the washing
machine rating plate correspond.
Check to be sure the washer hot and cold water supply
taps are turned on.
The settings are not retained after the appliance is
switched off.
Turning the washing machine on and off
The rotating Cycle Selector turns the washer on as wash
cycles are selected and off when the selector is later
turned to the vertical Off position.
Loading the laundry
Before loading your first load of laundry
Your new washing machine was tested before leaving
the factory. This process involves running various wash
cycles. As a result, a small amount of water may remain
in the tub and drainage system. Run a Maintenance cycle
with no laundry to clean the system before your first load
of laundry.
First add 1 to 2 tablespoons of detergent to the leftmost
compartment of the detergent dispenser. Then run the
Maintanance cycle.
9
WARNING
WARNING
To avoid risk of explosion! Laundry items that have
been pretreated with any material containing
solvents (e.g. stain remover, cleaner’s solvent) must
be rinsed out thoroughly by hand before they are
placed in the washing machine.
Wait for the cycle to finish.
Loosen the laundry being loaded and mix small and
large items
Unfold the sorted items and place them loosely in the
drum. Mix small and large items to help them better
distribute in the drum during the spin cycle.
Tip: Do not exceed the maximum load recommended for
the type of wash. Overloading will cause poor wash
results and will cause creasing.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Recommended Load Size
Recommended maximum load size can be found:
Filling
WARNING
9
IRRITATION OF EYES/SKIN!
When opening the detergent drawer during
operation, detergent or laundry care products may
spray out.
Open the drawer carefully.
In case of contact with detergent or laundry care
products, rinse the eyes or skin thoroughly.
D
C
B
In case of accidental ingestion, consult a doctor.
NOTICE: Thin thick fabric softener and laundry care
a
b
c
1/3 Load - woollens, delicates, silk
products with water; this prevents clogging.
1/2 Load - cotton, synthetic fabrics, or knitted textiles
Full Load - cotton and linen
Pour the detergent and laundry care product into the
appropriate chambers:
Tips
Detergent
for liquid detergent
dispenser A
After loading, close the door carefully so as not to trap
any items between the door and the rubber seal. The
door should close easily and should not be forced to
close.
Dispenser I
Detergent for pre-wash
Fabric softener, starch
Do not exceed max
Dispenser i
Foreign objects left in the drum may damage laundry.
Before inserting any laundry, check to make sure no
foreign objects are in the drum.
Tips
Do not pour fabric softener directly into
the wash load.
Filling the detergent and additives
compartments
Fabric softener is automatically dis-
pensed during the last rinse cycle.
NOTICE: Damage to the appliance
Dilute concentrated or thick fabric soft-
ener or fabric conditioner with water (2/
3’s water) before pouring it into the dis-
penser (prevents blockage of overflow).
Detergent and laundry pre-treatment aids (e.g. spot
remover, pre-wash sprays, etc.) can cause damage if
they come into contact with the surfaces of the washer.
Do not let these substances touch the surfaces of the
washer. If necessary, wipe off spray traces and other
traces/drops immediately with a soft cloth.
Dispenser II Detergent for main wash, water softener,
spot remover,
NOTICE: Do not use bleach and liquid
chlorine bleach or color safe bleach.
Measuring
Measure out the detergent and laundry care products
according to:
1. Open the detergent dispenser drawer.
2. Add detergent or additive.
▯ the water hardness; consult your water utility company
for details
3. Avoid overfilling the compartment to prevent early
▯ the manufacturer's instructions on the packaging
▯ Quantity of laundry
dispensing.
4. Close the detergent dispenser drawer completely
▯ Soiling
before starting the wash cycle.
Tip: DO NOT operate the washer without the detergent
compartment in place and fully closed.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Liquid detergent dispenser
To measure liquid detergent:
Pausing/Continuing the cycle
Press Start/Pause. - ¿ - appears on the display panel;
washing machine door cannot be opened. To continue
the cycle, press Start/Pause.
1. Pull out the detergent drawer. Press down on the insert
and remove the drawer completely.
2. Push the liquid detergent dispenser forward.
3. Insert the drawer again.
Cancel cycle
For cycles with a high temperature:
1. Press Start/Pause.
2. Cool the laundry off: Select Rinse.
3. Press Start/Pause.
For cycles with a low temperature:
1. Press Start/Pause.
2. Select Spin/Drain.
3. Press Start/Pause.
NOTICE: Do not use the liquid detergent dispenser with
gel-type detergents and powdered detergents or for
cycles with pre-wash and selected "Finish at" time.
Cycle end with rinse stop
Appears in the display field – – – and the indicator lamp
on the Start/Pause button blinks.
Starting the cycle
Press the Start/Pause button Indicator lamp lights up
and the cycle starts.
In order to exit the cycle, set the cycle selector to Spin/
Drain or select a spin speed range, then press the Start/
Pause button.
NOTICE: If you want to protect the cycle against
inadvertent adjustment, select the child lock.
Cycle end
End appears in the display field and the Start/Pause
button indicator lamp is off.
During the cycle, the display field indicates the "Finish at"
time and, after starting the washing cycle, the cycle
duration and the symbols for the cycle progress.
If the cycle status sequence Wash is also flashing in the
display field, the washer has detected too much foam
during the washing cycle and it has then automatically
switched on a rinse to remove the foam.
NOTICE: Use less detergent the next time you run the
Child lock
washer with the same load.
You can secure the washer against inadvertent changing
of the set functions. To do this, activate the child lock
after cycle start.
To Activate/Deactivate, press Start/Pause for approx. 5
seconds. In the display field, you will see the D symbol.
Removing laundry/switching the
appliance off
1. Open the front door of the washer and remove the
laundry.
▯
D lit steady: The child lock is active.
2. Turn the cycle selector to the Off position. Appliance is
▯
D blinking: The child lock is active and the cycle
selector has been adjusted. To prevent a cycle
interruption, set the cycle selector back to the initial
cycle. The symbol lights up again.
switched off.
3. Turn off the water tap.
NOTICES
NOTICE: The child lock can remain activated until the
next cycle start even after switching the machine off.
Then you must deactivate the child lock before cycle
start and if necessary activate it again after cycle start.
▯ Do not leave any laundry in the drum. It can shrink or
be discolored by the next laundry.
Selecting a different cycle
If you have inadvertently started the wrong cycle, you can
change this as follows:
1. Press Start/Pause.
2. Select another cycle.
3. Press Start/Pause. The new cycle starts from the
beginning.
▯ Remove any remaining items from the drum and
rubber gasket.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
▯ Leave the front door and detergent drawer open so
▯ If at the end of the cycle the display is not lit up, the
energy saving mode is active. To see display, press
any button.
that any remaining water can dry up.
▯ Always wait for the end of the cycle; otherwise the
appliance may still be locked. If locked, switch the
appliance on and wait until it unlocks.
Signal
1. Activate adjustment mode for the signal volume
Hold Spin speed button down + turn one posi- Hold down for an additional 5 s until the
Place on Ú.
tion to the right.
display elements light up. Adjustment
mode is activated.
2. Setting volume for button signals (depending on the model)
Press until the desired volume has been reached.
to 3. or
Ú in order to exit the adjustment mode for the sig-
nal volume.
3. Setting volume for indicator signals
Turn one position to the
right.
Press until the desired volume
has been reached.
Ú in order to exit the adjustment mode for the signal
volumen.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and maintenance
Your washer is designed to give you many years of
service. Observe the following instructions to maintain
and protect your washer and keep it in top operating
condition.
Cleaning the detergent dispenser
If there is a buildup of residual detergent or additives, or
if the softener compartment is not rinsed out well
enough, it may be helpful to clean the dispenser.
9
WARNING
ꢈ
ꢂ
RISK OF ELECTRIC SHOCK!
To avoid risk of electric shock always disconnect
the washer from the power outlet prior to cleaning.
Never clean the washer with a pressure washer.
ꢇ
Cleaning the housing and control panel
9
WARNING
1. Open the dispenser drawer fully. Press down on the
drawer catch (1) and pull the drawer (2) from the
washer housing.
RISK OF EXPLOSION!
To avoid risk of explosion never clean the washer
with flammable solvents.
2. Remove the liquid detergent insert (3) by grasping it
and pulling it upwards from the detergent dispenser
drawer.
As required, you may clean the washer housing and
control panel.
- use hot soapy water or a mild (non-abrasive) cleansing
agent.
3. Clean the insert by holding it under warm running
water. Lightly wipe away any remaining detergent
residue.
4. Reinsert the liquid detergent insert and slide the
detergent dispenser drawer back into place and close
the drawer securely.
- Dry with a soft towel.
- Remove residue immediately.
- Do not use high pressure spray.
Tip: Do not operate the washer without the detergent
drawer in place and completely closed.
Cleaning the drum
Metallic debris left in the drum can produce rust spots on
the drum. Never use steel wool to try to remove these.
Cleaning the water inlet strainers
If the washer water supply slows or stops completely, the
water inlet strainer may be blocked. Cleaning is
recommended every 6 months in any event to reduce
chances of valve blockage in areas using hard water.
Use a chlorine-free cleansing agent and follow the
manufacturer’s instructions.
Descaling the washer
Provided that you use correct amounts of detergent with
your wash loads, descaling is not necessary. If descaling
the washer drum does become necessary, please follow
the descaling product manufacturer’s instructions.
Small amounts of descaling agent can be used to
remove white spots on the washer drum caused by lime
or mineral deposits or small amounts of rust caused by
metal objects left in the drum.
Release the water under pressure in the supply hoses
Normal water pressure in your home will cause some
water to leak when you remove the water supply hose
from the back of the washer. You can minimize this by
first de-pressurizing the hoses.
1. Turn off the water tap.
2. Turn the cycle selector to any wash cycle (not to Drain
NOTICE: Descaling agents contain acids which may
attack parts of the washing machine and may discolor
the laundry.
or Spin).
3. Press Start/Pause and allow 30 seconds to pass.
4. Turn the cycle selector to the Off position.
This should reduce the water pressure on the water
supply hose.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Clean the strainers at the water tap end of the hose
It may be necessary to clean the washer drain pump if
the washer fails to drain (sound of water being pumped
from the washer cannot be heard when the washer
should be draining and other nearby drains, such as a
sink, are draining properly).
The washer pump can become blocked by loose debris
(a good reason to check the drum and remove any
visible debris after each load.) Fabrics that give off large
amounts of fluff may also cause blockage.
To access the washer drain pump, the service cover
must first be removed (see steps below). With the service
cover removed, proceed as follows:
1. If the washer has not been drained, try to drain it now.
Turn the cycle selector to the Spin/Drain cycle, select
No spin and press the Start/Pause button. Wait a few
moments to let the cycle drain the water from the
drum. If the pump is totally blocked, the water will be
unable to drain and the cycle will end.
1. Remove the hose from the tap.
2. Rinse the strainer under running water. Look at the
strainer to see if any visible debris is still present.
Rinse again if necessary to remove the debris.
3. Reconnect the hose to the tap.
2. Shut off the tap so that no more water flows in and has
to be drained.
Clean the strainers at the washer end of the hose
Switch the appliance off. Unplug the power plug.
1. Remove the hose from the inlet on the back of the
washer.
3. Open and remove the service cover.
2. Using narrow pliers, grasp and pull the strainer from
the inlet port.
3. Rinse the strainer under running water.
4. Reconnect the hose to the back of the washer and
turn on the water tap. Check to see if water flows by
starting a warm water wash cycle.
NOTICE: Check for leaks to be sure the rubber washers
are seated at both ends of the water supply hose and the
connections are properly tightened.
4. Loosen the screws and remove the protective film.
Cleaning the drain pump
9
WARNING
ꢂꢉꢃƒ)
RISK OF SCALDING
Risk of hot water injury to skin!
Allow the water to cool down prior to actuating the
emergency door lock release.
Caution, you are responsible for ensuring the safety
of doing so. The water in the drum may be very hot
and may pose a scald risk. Also, the drum may be
full of water.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Use the pull-out drain hose located in the pump
access opening to drain the remaining water into a
suitable container (up to 5.3 U.S. gallons/20 liters of
water may be drained). Pull the sealing cap from the
hose and lay the hose over the side of the container
and allow the water to finish draining from the drum.
When finished, replace the sealing cap into the end of
the hose and restore the hose to its storage location.
6. Turn the pump cover counterclockwise to remove it. A
small amount of residual water may flow out when the
cover is removed.
Clean the interior of the pump housing, removing any
debris or foreign objects. Check to be sure the
impeller wheel at the back of the pump housing can
now turn freely.
Remove any lint, debris or detergent residue from the
threads of the pump cover and the pump cover
housing.
Replace the pump cover and tighten the screws.
Handle must be vertical.
7. Screw the protective film on the pump on again.
8. Insert the service cover snap it in, and close it.
NOTICE: In order to prevent detergent from flowing
unused into the drain during the next wash cycles: pour
0.26 U.S. gallons/1 liter water into the chamber II.
Turn the cycle selector to the Spin/Drain cycle, select No
spin and press the Start/Pause button.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Emergency door lock release
In the event of a power interruption the program will
continue running when the power supply has been
restored.
If the washer door must be opened and the normal door
unlock procedures do not work, the emergency door
lock release rod can be actuated to open the door.
9
WARNING
7. The door can then be opened.
RISK OF SCALDING
To avoid risk of scalding, allow water to cool down
prior to activating the emergency door lock release.
The drum may be full of hot water which could
cause burn injury,
Troubleshooting
If you encounter a problem, consider the suggestions
and instructions below before you call customer service.
9
WARNING
9
WARNING
ELECTRIC SHOCK
To avoid risk of electric shock, repairs should be
carried out by an authorized technician.
RISK OF INJURY
You may injure your hands if you reach into the
drum while it is turning.
Do not reach into the drum when it is turning. Wait
until the drum has stopped turning.
If repairs are necessary and you cannot eliminate the
fault with the aid of the table below, follow these steps:
1. Turn the cycle selector to Off.
2. Disconnect the washer from the power outlet.
3. Turn off the water faucet.
9
CAUTION
4. Call Customer Service.
WATER DAMAGE
Any escaping water may cause water damage.
Do not open the washing machine door if water can
be seen through the glass.
NOTICE: The troubleshooting items listed below can
help you resolve minor issues with your washer quickly
and without the necessity of waiting for a service call.
Service calls for issues that could have been solved by
using this table may not be covered under the
warranty. Please rule out any of these issues before
calling customer service.
1. Turn the washer off by rotating the cycle selector to the
Off position. Any running program will then be
cancelled. Disconnect the mains plug.
2. Allow the water in the drum to cool off.
3. Allow the washer drum to come to a stand still (no
longer spinning).
4. Before opening the washer door, perform the drain
procedure included in the pump maintenance section
following.
5. Loosen screws and remove the protective foil.
6. The washing machine door can then be opened.
Pull the emergency release downwards with a tool and
release.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Determing the Problem
Problem
Possible cause(s)
Solution(s)
Washer door cannot be Child lock is activated.
opened.
Deactivated Child lock (press and hold Start/Pause for
5 seconds).
A power failure occured.
If a cycle is interrupted by a power failure, it will
resume when the power is restored.
Cycle is running, or water level is
Wait until the cycle ends.
high or hot.
Electric power cord has become
loose or unplugged.
Make sure the electric cord is securely plugged in.
Cycle selector turned to Off before Turn the cycle selector to a cycle.
end of cycle.
Select No spin.
In order to exit the cycle, set the cycle selector to
Spin/Drain or select a spin speed range, then press
the Start/Pause button.
Emergency door lock released is
activated.
Door still cannot be
opened, even after
turning the washer Off
and back on again.
Child lock is activated
Deactivated Child lock (press and hold Start/Pause for
5 seconds).
Door is locked for safety reasons
(high water level, temperature of
water hot, or high drum speed
(drum is turning).
Wash cycle time is
increaed.
Your washer utilizes sensors to
monitor certain characteristics of
the wash load. Increases in wash
cycle time could be due to:
Solutions are based on the specific reason the wash
time has been extended.
Excess suds.
Use less detergent.
The automatic unbalanced load
Always load the washer with a mixture of large and
detection system spins the laundry small wash items (easier to distribute in the drum).
several times to ensure even distri-
bution.
Cycle does not start -
Start/Pause flashes.
Start/Pause button not pressed /
selected?
Press the Start/Pause button to start the cycle.
Washer door is not closed properly. Check if laundry is caught in the door. Close the door
until a click is heard, the cycle should start.
Cycle does not start -
Delay start-Time is dis- selected and activated.
played.
Cycle ending time has been
Wash cycle will begin at proper time to complete at
the selected finish time.
Cycle does not start -
D symbol flashes.
Child lock is activated.
Deactivate Child lock (press and hold Start/Pause for
5 seconds).
Detergent residue
remains in the deter-
gent dispenser.
Dry detergent may have been damp Clean and dry the detergent dispenser.
or lumpy.
Excess liquid detergent may have
been added.
See Adding the correct amount of HE detergent to
determine proper detergent usage.
Use the dosing cup for liquid deter- Clean and dry the detergent dispenser.
gent when dosing powder deter-
gent. Powder detergent may have
been damp or lumpy.
Water does not appear Start/Pause selected?
Select Start/Pause.
Turn on water faucet.
Eliminate the cause.
to be coming into the
washer, or detergent is
Supply hose kinked or pinched
not washed away.
Water faucet not turned on.
(reduce flow).
Water supply hose strainers
clogged.
Clean the water inlet strainers.
Eliminate the cause.
Water pressure too low.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Possible cause(s)
Solution(s)
Water cannot be seen The water level in your high effi-
No action needed.
in the drum.
ciencey front load washer is below
the visible part of the drum, this is
normal.
Water has not drained Suds may be excessive (usually
Use less detergent for future loads. Be sure to use
completely.
due to too much detergent or non- only high efficiency HE-detergents.
HE detergent being used).
No spin is selected.
In order to exit the cycle, set the cycle selector to
Spin/Drain or select a spin speed range, then press
the Start/Pause button.
Pump is blocked.
Check and clean the drain pump, water drain hose
and/or the drain pipe.
Drain hose or drain pipe is blocked. Clean drainage pipe and/or drainage hose.
Water is coming out
from the underneath
the washer.
Water supply hose is leaking: is not Eliminate the cause: tighten the hose (by hand at the
screwed on tight at both ends, or
rubber washer not placed in hose.
washer end), check for rubber washer in place.
Drain hose is leaking.
Check the drain hose, be sure that it is on the washer
securely with the clamp in place; may need to replace
the drain hose if leaking continues.
Foam comes out of the Too much detergent was used, or a Immediate fix: mix 1 tablesponful of fabric softener
detergent dispenser
drawer.
non-HE detergent was used; pump with 1/2 liter (1 pint) of water and pour this mixture
was not able to pump out the
increased suds.
into the detergent compartment (not with waterproof
fabrics).
The cyle status
To prevent: use less detergent for future wash loads.
sequence Washflashes
in the display.
Repeated spinning.
The Unbalanced Load Detection
system ia attempting to balance the large and small wash items (easier to distribute in the
To prevent: always load the washer with a mixture of
load through repeated spins.
drum).
No spin took place
(laundry is still wet).
Load size to small.
Add more laundry.
Large items may have become
entangled in the drum and could
not be distributed by the Unbal-
anced Load Detection system; spin
cycle therefore canceled for safety
reasons.
To prevent: always load the washer with a mixture of
large and small wash items (easier to distribute in the
drum).
Excessive suds: too much deter-
Immediate fix: mix 1 tablesponful of fabric softener
gent was used, or a non-HE deter- with 1/2 liter (1 pint) of water and pour this mixture
gent was used.
into the detergent compartment (not with waterproof
fabrics).
To prevent: use less detergent for future wash loads.
Brush off when laundry is dry or
Detergent residue on
the laundry.
Some phosphate-free detergents
contain water-insoluble residues
may appear as light spots on the
laundry.
execute the program Rinse.
System shakes or
shudders when spin
speed increases.
The washer drum suspension sys- Mix small and large laundry items together in the load
tem shifts during spinning as the to minimize this effect. Check to be sure the washer is
speed increases. This may result in level and all four feet press equally against the floor.
a slight shaking of the washer
during the spin speed transition.
Transport bolts removed?
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Error messages
Display
Fault
Measure
E:16
Door not closed properly.
Check to be sure no laundry is caught in the washer
door. Close the door securely.
E:17
Water tap not turned on.
Turn on water tap.
Water supply hose kinked or
pinched closed.
Eliminate the cause, replace the hose if damage.
Strainer in water supply hose
clogged.
Clean the water inlet strainer.
Eliminate the cause.
Water pressure too low.
E:18
Too much detergent used or non-
HE detergent used.
Use less detergent for future loads. Only use HE deter-
gents.
Pump is blocked (obstructed).
Clean the washer drain hose and/or the drain pipe.
May need to perform pump maintenance to clear
blockage.
Other displays
Turn off machine, wait 5 seconds and turn on again. If
the display shows again, call customer service.
NOTICE: Error messages should be listed here. Include
those that the customer can benefit by seeing and
understanding what the code means. Some error codes
can only inform the customer to call Customer Service.
Customer service
Contact our Customer Service Department if your
appliance needs repair. Our central Customer Service
will be happy to supply you with details on a center close
to you.
E-Nr. and FD (serial) number:
When you contact our Customer Service, please have
the E-Nr. (model number) and the FD (serial) number for
your appliance available. You can find the identification
plate with these numbers on the underside of the
appliance and in the appliance booklet.
Questions? Please contact us. We look forward to
hearing from you!
ꢀꢉꢊꢂꢂꢉꢁꢇꢇꢉꢆꢁꢂꢇ
ZZZꢈERVFKꢉKRPHꢈFRP
ꢀꢁꢂꢀꢃ0DLQꢃ6WUHHWꢄꢃ6XLWHꢃꢅꢂꢂ
,UYLQHꢄꢃ&$ꢃꢁꢆꢅꢀꢇ
32
Download from Www.Somanuals.com. All Manuals Search And Download.
STATEMENT OF LIMITED PRODUCT WARRANTY
Product proves to have been manufactured with a defect
Bosch Clothes Washer
in materials or workmanship. If reasonable attempts to
repair the Product have been made without success,
then Bosch will replace your Product (upgraded models
may be available to you, in Bosch's sole discretion, for
an additional charge). All removed parts and
components shall become the property of Bosch at its
sole option. All replaced and/or repaired parts shall
assume the identity of the original part for purposes of
this warranty and this warranty shall not be extended with
respect to such parts. Bosch's sole liability and
What this Warranty Covers & Who it Applies to: The
limited warranty provided by BSH Home Appliances
Corporation (Bosch) in this Statement of Limited Product
Warranty applies only to the Bosch Clothes Washer
("Product") sold to you, the first using purchaser, but
strictly conditioned on the Product having been
purchased: (1) for your normal, household (non-
commercial) use, and has in fact at all times only been
used for normal household purposes (any commercial
use or setting of the Product automatically voids the
warranty); (2) new at retail (not a display, "as is", or
previously returned model) purchased directly by the
end-user consumer, and not for resale, or commercial
use; and (3) within the United States or Canada, and has
at all times remained within the country of original
purchase. The warranties stated herein apply only to the
first purchaser of the Product and are not transferable.
Bosch reserves the right to request proof of purchase at
the time any warranty claim is submitted to confirm that
the Product falls within the scope of this limited product
warranty. The warranty is automatically void if the Product
was a display model, sold "as is", tampered with, a
damaged or "scratch and dent" model, or a previously
returned model, a free give-away, charitable donation or
contest prize.
responsibility hereunder is to repair manufacturer-
defective Product only, using a Bosch-authorized service
provider during normal business hours. For safety and
property damage concerns, Bosch highly recommends
that you do not attempt to repair the Product yourself, or
use an un-authorized servicer; Bosch will have no
responsibility or liability for repairs or work performed by
a non-authorized servicer. If you choose to have
someone other than an authorized service provider work
on your Product, THIS WARRANTY WILL
AUTOMATICALLY BECOME NULL AND VOID. Authorized
service providers are those persons or companies that
have been specially trained on Bosch products, and who
possess, in Bosch's opinion, a superior reputation for
customer service and technical ability (note that they are
independent entities and are not agents, partners,
affiliates or representatives of Bosch). Notwithstanding
the foregoing, Bosch will not incur any liability, or have
responsibility, for the Product if it is located in a remote
area (more than 100 miles from an authorized service
provider) or is reasonably inaccessible, hazardous,
threatening, or treacherous locale, surroundings, or
environment; in any such event, if you request, Bosch
would still pay for labor and parts and ship the parts to
the nearest authorized service provider, but you would
still be fully liable and responsible for any travel time or
other special charges by the service company, assuming
they agree to make the service call.
Limitation for Third Party Accessories and Water
Supply Hoses: Third party accessories, including water
supply hoses other than those shipped with your Bosch
washer, and any consequential damages resulting
therefrom, are not covered by this warranty. This
limitation expressly includes the implied warranties of
merchantability and fitness for a particular purpose,
which are also expressly excluded with respect to third
party accessories, including water supply hoses other
than those shipped with your Bosch washer. Use of third
party accessories, including water supply hoses other
than those shipped with your Bosch washer, does not
void this warranty on any other part, and all other
provisions of this warranty remain in effect.
LENGTH OF WARRANTY
2 year Limited Warranty on Drive Motor from Date of
Purchase
Please make sure to return your registration card; while
not necessary to effectuate warranty coverage, it is the
best way for Bosch to notify you in the unlikely event of a
safety notice or product recall.
How Long the Warranty Lasts: Bosch warrants that the
Product is free from defects in materials and
workmanship for a period of three hundred sixty-five days
(365) days from the date of purchase. The foregoing
timeline begins to run upon the date of purchase, and
shall not be stalled, tolled, extended, or suspended, for
any reason whatsoever.
Repair/Replace as Your Exclusive Remedy: During this
warranty period, Bosch or one of its authorized service
providers will repair your Product without charge to you
(subject to certain limitations stated herein) if your
33
Download from Www.Somanuals.com. All Manuals Search And Download.
SCOPE OF WARRANTY
PERIOD THAT THIS EXPRESS LIMITED WARRANTY IS
EFFECTIVE. IN NO EVENT WILL THE MANUFACTURER
BE LIABLE FOR CONSEQUENTIAL, SPECIAL,
Bosch will repair or replace, free of charge any motor or
component part of the motor that proves defective under
conditions of normal home use during the first 2 years
from the date of purchase, labor charges excluded.
INCIDENTAL, INDIRECT, "BUSINESS LOSS", AND/OR
PUNITIVE DAMAGES, LOSSES, OR EXPENSES,
INCLUDING WITHOUT LIMITATION TIME AWAY FROM
WORK, HOTELS AND/OR RESTAURANT MEALS,
REMODELLING EXPENSES IN EXCESS OF DIRECT
DAMAGES WHICH ARE DEFINITIVELY CAUSED
EXCLUSIVELY BY Bosch, OR OTHERWISE. SOME
STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, AND SOME STATES DO NOT ALLOW
LIMITATIONS ON HOW LONG IMPLIED WARRANTY
LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY
TO YOU. THIS WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS, WHICH VARY FROM STATE TO STATE. No
attempt to alter, modify or amend this warranty shall be
effective unless authorized in writing by an officer of BSH.
Out of Warranty Product: Bosch is under no obligation,
by law or otherwise, to provide you with any concessions,
including repairs, pro-rates, or Product replacement,
once this warranty has expired.
Warranty Exclusions: The warranty coverage described
herein excludes all defects or damage that are not the
direct fault of Bosch, including without limitation, one or
more of the following: (1) use of the Product in anything
other than its normal customary and intended manner
(including without limitation, any form of commercial use,
use or storage of an indoor product outdoors, use of the
Product in conjunction with air or water-going vessels);
(2) any party's willful misconduct, negligence, misuse,
abuse, accidents, neglect, improper operation, failure to
maintain, improper or negligent installation, tampering,
failure to follow operating instructions, mishandling,
unauthorized service (including self-performed "fixing" or
exploration of the appliance's internal workings); (3)
adjustment, alteration or modification of any kind; (4) a
failure to comply with any applicable state, local, city, or
county electrical, plumbing and/or building codes,
regulations, or laws, including failure to install the
product in strict conformity with local fire and building
codes and regulations; (5) ordinary wear and tear, spills
of food, liquid, grease accumulations, or other
How to Obtain Warranty Service: To obtain warranty
service for your Product, you should contact the nearest
Bosch authorized service center.
BSH Home Appliances Corporation - 1901 Main Street,
Suite 600, Irvine, CA 92614 / 800-944-2904
substances that accumulate on, in, or around the
Product; and (6) any external, elemental and/or
environmental forces and factors, including without
limitation, rain, wind, sand, floods, fires, mud slides,
freezing temperatures, excessive moisture or extended
exposure to humidity, lightning, power surges, structural
failures surrounding the appliance, and acts of God. In
no event shall Bosch have any liability or responsibility
whatsoever for damage to surrounding property,
including cabinetry, floors, ceilings, and other structures
or objects around the Product. Also excluded from this
warranty are scratches, nicks, minor dents, and cosmetic
damages on external surfaces and exposed parts;
Products on which the serial numbers have been altered,
defaced, or removed; service visits to teach you how to
use the Product, or visits where there is nothing wrong
with the Product; correction of installation problems (you
are solely responsible for any structure and setting for
the Product, including all electrical, plumbing or other
connecting facilities, for proper foundation/flooring, and
for any alterations including without limitation cabinetry,
walls, floors, shelving, etc.); and resetting of breakers or
fuses. TO THE EXTENT ALLOWED BY LAW, THIS
WARRANTY SETS OUT YOUR EXCLUSIVE REMEDIES
WITH RESPECT TO PRODUCT, WHETHER THE CLAIM
ARISES IN CONTRACT OR TORT (INCLUDING STRICT
LIABILITY, OR NEGLIGENCE) OR OTHERWISE. THIS
WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES,
WHETHER EXPRESS OR IMPLIED. ANY WARRANTY
IMPLIED BY LAW, WHETHER FOR MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, OR
OTHERWISE, SHALL BE EFFECTIVE ONLY FOR THE
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
1901 Main Street, Suite 600 • Irvine, CA 92614 • 1-800-944-2904
*9000826642*
9000826642
9309
Download from Www.Somanuals.com. All Manuals Search And Download.
|