Model WCU250
Professional Overhead
Hanging Microphone
DESCRIPTION
TheWCU250 is an electret condenser, uni-directional, professional microphone
perfectly-suited for picking up audio from large groups such as choirs, orches-
tras, and musical ensembles. Because it can be ceiling-mounted and is compact
in size, the WCU250 is very useful in minimizing visual distraction for the per-
formers and the audience alike, and limits intrusion into the working space.
TheWCU250 utilizes a superior-quality, state-of-the-art transducer element and
circuitry. It features a transformerless, direct-coupled design to ensure clear,
transparent reproduction of even the most delicate transients at the highest
output levels.
The WCU250 cable is terminated by a mini-XLR (female).A mini-XLR to stan-
dard XLR adapter houses the pre-amplifier. Its specially-tailored wide, flat fre-
quency response provides enhanced and full, rich reproduction of voice and
music. The microphone requires an external 9V - 52V DC phantom power sup-
ply.The WCU250 comes in an inconspicuous, non-reflective matte black finish.
POLAR GRAPH
SPECIFICATIONS
0˚
330˚
30˚
MIC Type:
Element:
Overhead hanging
Back Electret condenser
Uni-directional
250-ohm
50 Hz to 18 kHz
-65 dB +/- 3 dB
>130 dB
60˚
300˚
Polar Pattern:
Impedance:
Frequency Response:
Sensitivity*:
Max SPL @ 1% THD:
S/N Ratio:
90˚
270˚
240˚
120˚
150˚
210˚
180˚
>65 dB
Cable:
20 ft.
FREQUENCY RESPONSE GRAPH
1
Dimensions:
Product Weight:
Material:
11/4" D x /2" Dia.
dB Frequency Response, Magn dB re 1 V/microbar
-50
5 oz.
Copper
Matte black
-60
-70
-80
Finish:
* (0 dB=1V/microbar 1,000 Hz indicated by open circuit)
-90
-100
20
200
1K
2K
20K Hz
o
= 0 on axis
o
= 180 off axis
LIMITED WARRANTY
Bogen microphones are warranted to be free from defects in material or workmanship provided that the product has not been subjected to abuse or accident or altered in any way for one
(1) year from the date of sale to the original purchaser.Any part of the product covered by this warranty that, with normal installation and use, becomes defective will be repaired or replaced
by Bogen, at our option, provided the product is shipped insured and prepaid to: Bogen Factory Service Department, 50 Spring Street, Ramsey, NJ 07446, USA.The product will be returned
to you freight prepaid.This warranty does not extend to any of our products that have been subjected to misuse, improper storage, neglect, accident, improper installation or have been mod-
ified or repaired in any manner that Bogen believes may affect the reliability of the product, or where the serial number or date code has been removed or defaced.
THE FOREGOING LIMITED WARRANTY IS BOGEN'S SOLE AND EXCLUSIVE WARRANTY AND THE PURCHASER'S SOLE AND EXCLUSIVE REMEDY. BOGEN MAKES NO OTHER
WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
DISCLAIMED AND EXCLUDED. Bogen's liability arising out of the manufacture, sale or supplying of products or their use or disposition, whether based upon warranty, contract, tort or
otherwise, shall be limited to the price of the product. In no event shall Bogen be liable for special, incidental or consequential damages (including, but not limited to, loss of profits, loss of
data or loss of use damages) arising out of the manufacture, sale or supplying of products, even if Bogen has been advised of the possibility of such damages or losses.
Products that are out of warranty will also be repaired by the Bogen Factory Service Department -- same address as above or call 201-934-8500. The parts and labor involved in these
repairs are warranted for 90 days when repaired by the Bogen Factory Service Department. All shipping charges in addition to parts and labor charges will be at the owner's expense.
Printed in the Philippines. 0308
© 2003 Bogen Communications, Inc.
54-2049-01B
Specifications subject to change without notice.
50 Spring Street, Ramsey, NJ 07446, U.S.A.
201-934-8500; Fax: 201-934-9832
Download from Www.Somanuals.com. All Manuals Search And Download.
|