2-Port
USB Print Server
Share your USB printers with your
networked computers
Wired
Ethernet
E
User Manual
Ethernet
10/100
Mbps
F1UP0301
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Thank you for purchasing the Belkin USB Print Server. Now you
can share your USB-equipped printers with your wired network.
The Belkin USB Print Server allows you to connect up to two USB
printers directly to your network, eliminating the need to have a
dedicated PC for printing. It offers an easy installation and setup that
has you sharing printers in minutes. Please read through this manual
completely to be sure that you are getting the most from your new
Belkin USB Print Server.
1
2
3
4
Belkin home networking lets you easily enjoy these
additional advantages
•
Share one high-speed Internet connection with all the computers
in your home
5
•
Share resources, such as files, and hard drives among all the
connected computers in your home
6
•
•
•
•
Share a single printer with the entire family
7
Share documents, music, video, and digital pictures
Store, retrieve, and copy files from one computer to another
8
Simultaneously play games online, check Internet e-mail,
and chat
9
What types of connections are used to create a home network?
The two common ways to set up a home network are with wireless
and wired technologies.
10
Advantages of a wireless network:
•
Mobility – you’ll no longer need a dedicated “computer room”—
now you can work on a networked laptop or desktop computer
anywhere within your wireless range
•
•
•
Easy installation – Belkin Easy Installation Wizard makes
setup simple
Flexibility – set up and access printers, computers, and other
networking devices from anywhere in your home
Easy Expansion – the wide range of Belkin networking products
let you expand your network to include devices such as printers
and gaming consoles
•
•
No cabling required – you can spare the expense and hassle of
retrofitting Ethernet cabling throughout the home or office
Widespread industry acceptance – choose from a wide range
of interoperable networking products
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Wireless Networking Speed
Currently there are three levels of wireless networking standards,
which transmit data at very different maximum speeds. Each is based
on the designation 802.11x, so named by the IEEE, the board that is
responsible for certifying networking standards. The most common
wireless networking standard, 802.11b, transmits information at
11Mbps; 802.11a and 802.11g work at 54Mbps See the following
chart for more detailed information.
Wireless Comparison
Wireless
802.11b
802.11g
802.11a
Technology
Speed
11Mbps
54Mbps
54Mbps
Frequency
Common
Common
5GHz -
household
household
uncrowded band
devices such as
cordless phones
and microwave
ovens. May
devices such as
cordless phones
and microwave
ovens. May
interfere with
the 2.4GHz
interfere with
the 2.4GHz
unlicensed band
unlicensed band
Compatibility
Range
Compatible with
802.11g
Compatible with
802.11b
Incompatible
with 802.11b or
802.11g
Depends on
interference -
typically 50-300
ft. indoors
Depends on
interference -
typically 50–300
ft. indoors
Less interference
- range is
typically 50-100
feet
Adoption
Price
Mature - widely
adopted
Expected to
continue to grow
in popularity
Slow adoption
for consumers -
more popular in
business
Inexpensive
More expensive
Most expensive
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
1
2
Advantages of a wired network:
•
•
•
•
Low cost – on average, wired networking devices are less
expensive than wireless networking devices
Faster speeds – common speed is 100Mbps with recent
technology providing up to 1000Mbps
3
Flexibility – set up and access printers, computers, and other
networking devices from anywhere in your home
4
Better range – wired Ethernet technology provides distance
of up to 328 feet (without a repeater), while wireless range is
typically 150 to 200 feet
5
•
•
Existing wired infrastructure – because of the maturity of wired
technology, some new homes are built with an Ethernet cabling
infrastructure
6
7
Widespread industry acceptance – a wide range of
interoperable networking products
8
Combining wired and wireless technologies.
9
Since wired technology has been around longer, you might already
own some wired networking products. In this case, consider
combining the two technologies to create a super-efficient, cost
effective home network.
10
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Placement of your Wireless Networking Hardware
Please note that to ensure the performance of your wireless network,
you must carefully plan the positioning of your wireless
networking hardware.
Examples of Wireless Networking Hardware:
•
•
•
•
•
•
•
Wireless Router
Wireless Range Extender/Access Point
Wireless Notebook Network Card
Wireless Desktop Network Card
Wireless USB Network Adapter
Wireless USB Print Server
Wireless Ethernet Adapter
Wireless technology is radio-based, which means connectivity
and throughput performance between devices decreases when
the distance between devices increases. Other factors that will
cause signal degradation (metal is generally the worst culprit) are
obstructions such as walls and appliances. As a result, the typical
indoor range of your Wireless devices will be between
100–200 feet.
The Wireless Router is the central connection point of the network,
with all wireless clients (i.e. wireless notebook network cards,
wireless desktop network card, and wireless USB adapters) attached
to it. In order to achieve the best wireless network coverage for
your connected computers, your Router should be placed as close
as possible to the center of the area that your want to cover with
antennas pointing UP. In multistory homes, place the Router on a floor
that is as close to the center of the home as possible; this may mean
placing the Router on an upper floor. Wireless devices work best in
a line-of-sight situation where there are no obstacles between the
wireless client and the Router.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
1
2
Try to avoid placement of wireless devices near:
•
•
•
•
•
•
2.4GHz cordless phones
Microwave Ovens
Refrigerators
3
Washer/Dryer
Metal Cabinets
4
Metallic-based UV tinted windows
5
Note: While the above items can affect network performance, your
wireless network still will function, although probably not at its
maximum effectiveness.
6
7
For more information regarding our networking products visit our
8
9
10
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
Product Features
•
•
•
•
Integrated, easy-to-use Print Server Setup Easy Installation Wizard
Ethernet interface, for operation in virtually all Ethernet networks
Easy installation and use
LEDs: Power, Ethernet link, Status, and Error
Applications and Advantages
•
•
Temporary LANs for special projects or peak time Sets up temporary
networks such as at trade shows, exhibitions, and construction sites,
which need networks on a short-term basis; also companies that need
additional printers for a peak activity period.
SOHO (Small Office/Home Office) networking needs Provides easy
and quick small network installations that SOHO users need
Product Specifications
Standard:
802.3 IEEE, 802.3u IEEE
1 LAN, 2 USB
Network Interface:
Power Consumption:
Input: 100-110v~0.4A, 50-60Hz
Output: 5v, 2.0A
Operating Temperature: 0 – 55 degrees C
Storage temperature:
Humidity:
-25 – 70 degrees C
Max. 95% (non-condensing)
System Requirements
•
•
•
Printer compatible with USB 1.1
USB cable for each printer
®
PC with Windows 98SE, Me, 2000, XP
Package Contents
•
•
•
•
•
Belkin USB Print Server
Installation Software CD
User Manual
Quick Installation Guide
Ethernet Cable
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
1
2
Knowing your Print Server
3
(a)
(b)
(c)
(d)
4
5
6
7
(a) PowerLED
8
Solid:
Off:
Server is ON
Server is OFF
9
(b) LAN LED
Solid:
Connected to Ethernet
10
Off:
Ethernet disconnected
Transferring data
Blinking:
Green:
Amber:
10Mbps device connected
100Mbps device connected
(c) Status LED
Solid:
OK
Blinking:
Attempting to obtain IP address while booting, or printing
in progress
(d) Error
Solid (Red):Printer missing or printer error
Off: OK
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
(a) Printer 1/Printer 2
These ports are used to connect one or two USB printers.
Note: These ports cannot be expanded using a USB hub.
(b) Ethernet Port
This port is used to connect the Print Server to an Ethernet network
via CAT5 cable.
(c) Reset/Test Button (3 functions)
Print Page: For most printers, this function results in a test page
to be printed. The test page will include Print Server settings
including the IP address and other information that might be handy
for troubleshooting the Print Server. To print test page, depress the
Reset/Test button momentarily.
WARNING: Some printers do not support this function.
Reset: To reset or reboot the Print Server to existing settings,
depress the Reset/Test button for five or more seconds.
Restore Factory Defaults: To restore the Print Server to factory
defaults, depress the Reset/Test button for 10 seconds while
powering up the Print Server.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Print Server Using the Setup Wizard
1
2
Make sure that each computer can print to the USB printer before
installing the USB Print Server.
1. Connect your printer directly to each computer on the network
and install USB printer drivers (see your printer documentation
for detailed instructions). The Print Server requires that the
correct drivers are loaded and working (printing) before the Print
Server is installed.
3
4
When installing printer drivers, install as:
5
•
•
•
•
Local printer, not network printer
USB port
6
Not to be shared
Default printer for all printing (if desired)
7
Note: Verify functionality on each computer by printing a test
page prior to moving to the next installation step.
8
2. Insert the Print Server Setup Wizard CD into your CD-ROM drive
on the first PC.
9
Note: If the Print Server Setup Wizard does not start up
automatically, select your CD-ROM drive from “My Computer”
and double-click on the file named “Setup” on the CD-ROM.
10
3. The Wizard will start.
Note: The Wizard will remind installer that step 1 needs to be
done before continuing. If step 1 is complete, click “Next” to
proceed. If not, please stop Wizard and complete step 1 for
all computers.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Print Server Using the Setup Wizard
4. Follow instructions from each screen of the Print Server
Setup Wizard.
5. When you see the following screen, installation is complete for
that PC. Click “Quit” and remove the CD from your computer.
Important: Repeat steps 2-5 for each additional PC you would like
to print from.
6. Enjoy your Print Server!
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup for Advanced Users
1
2
Install Print Drivers
Be sure to install the necessary print drivers on each computer that
will be accessing the Print Server.
3
Set Up Print Server
1. Plug your printer’s USB cable (power on) into the
4
Print Server.
2. Connect the included Ethernet cable into the Print Server and to
5
an available Ethernet port on your router or switch.
3. Power up the print server. Allow approximately one minute for
the Print Server to boot.
6
4. Verify that the Status light is illuminated and that the Error light is
not illuminated.
7
5. Determine the Print Server’s IP address, using one of the
following methods:
8
a) New Print Servers are configured to receive IP addresses
dynamically. If your network has a DHCP server, the Print
Server will obtain an IP address from your network. If the DHCP
server supports a client list, the client list will list the IP address
assigned to the Print Server. If a DHCP server is not available,
after 1.5 minutes the Print Server will revert to 192.168.2.253.
9
10
b) If the Print Server has been configured previously, then it will
have been set to a static IP address that could be different for
every network.
Note: Restoring factory defaults on the Print Server by
holding in the reset button for 10 seconds while repowering
the Print Server will restore the IP address to dynamic.
c) Run the program “PSF.exe” from the Installation CD. This will
find the IP address and link automatically to the web-based
management interface.
d) Go to the last step of the Print Server Installation Wizard, which
has an Advanced button that finds the IP address and links
automatically to the web-based management interface.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup for Advanced Users
6. Verify that the computer is in the same subnet as the Print Server
(The first three octets of the IP addresses are the same).
7. Type the Print Server’s IP address into your Internet browser from
any computer. For example, if your IP address is 192.168.2.225,
type “192.168.2.225” (do not type in anything else such as
8. Clicking the “Login” button or clicking on any one of the links on
the home page will take you to the login screen. The Print Server
ships with no password entered. In the login screen, leave the
password blank and click “Submit” to log in.
9. Set the IP address for the Print Server by clicking “IP Address”
(see “Web Interface – IP Address” for more info).
10. Cycle power on the Print Server to reboot it to the
new configurations.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup for Advanced Users
1
2
Configure Computers to Print to the Print Server
1. Install Port Monitor software on each computer by running
“instport.exe” from the CD.
2. Configure the Belkin Port Monitor on each computer printer driver
3
to point to the correct Print Server as follows:
a) In Windows, select the printer’s properties for the printer
connected to the Print Server and select the “Port” tab,
select the Belkin port, and click “Configure Port...”.
4
5
6
7
8
9
10
b) On the “Belkin Port: Properties” window, click “Locate Servers”.
c) On the “Available Servers” window, select the Print Server
you want to print to.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup for Advanced Users
d) Click “OK” to close. On the “Belkin Port: Properties” window,
the name of the Print Server you selected will appear. Click
“OK” to close.
e) On the Ports tab, disable bidirectional support if currently
enabled. Click “Apply”.
f) Click “OK” to close.
g) If there is a second printer connected to the Print Server,
select the properties for that printer and click the “Ports”
tab; select the Belkin port that was just configured.
Note: If more than one Print Server is available on your network,
refer to the section “Printing to Multiple Print Servers”.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Web Configuration
1
2
Accessing the Web Configuration Menus
1. Connect the included Ethernet cable into the Print Server and to
an available Ethernet port on your router or switch.
3
2. Power up the Print Server. Allow approximately one minute for
the Print Server to boot and obtain an IP address.
4
3. Determine the Print Server’s IP address, using one of the
following methods:
5
a) New Print Servers are configured to receive IP addresses
dynamically. If your network has a DHCP server, the Print Server
will obtain an IP address from your network. If the DHCP server
supports a client list, the client list will list the IP address
assigned to the Print Server. If a DHCP server is not available,
after 1.5 minutes the Print Server will revert to 192.168.2.253.
6
7
b) If the Print Server has been configured previously, then it will
have been set to a static IP address that could be different for
every network.
8
Note: Restoring factory defaults on the Print Server by holding in
the reset button for 10 seconds while repowering the Print Server
will restore the IP address to dynamic.
9
10
c) Run the program “PSF.exe” from the Installation CD. This
will find the IP address and link automatically to the web-based
management interface.
d) Go to the last step of the Print Server Installation Wizard,
which has an Advanced button that finds the IP address and links
automatically to the web-based management interface.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Web Configuration
4. Type the Print Server’s IP address into your Internet browser from
any computer. For example, if your IP address is 192.168.2.225,
type “192.168.2.225” (do not type in anything else such as “http://”
or “www”). Then press the “Enter” key. P74390-A page 12
Web Interface – Home Page
After entering the IP address of the Print Server, you will see the screen
illustrated below. This page shows most critical configuration information for
the Print Server. To modify settings, choose a topic from the menu on the left
of the screen.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Web Configuration
1
2
Web Interface – Login Screen
Clicking on any menu item will cause a login prompt to appear. If a password
has been set previously, enter it here. New Print Servers ship without
passwords; if this is the case, click “Submit” to continue.
3
4
5
6
7
Web Interface – IP Address
8
This menu allows the user to set a Static IP address, or to set the Print
Server to obtain an IP address automatically as a DHCP client. Although
Belkin designs the Print Server to obtain an IP address automatically, running
the Wizard will change the IP address to static. Static is the recommended
method of operation, since the computer will be configured to print to
a specific IP address which, if changed, would make the Print Server
inoperable.
9
10
Note: When choosing an IP address manually, be sure to choose a unique
IP address in the same domain (first three sets of digits the same) as the
gateway of your network.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Web Configuration
Web Interface – Print Server Configuration
This menu allows the user to modify the following parameters:
•
Print Server Name: This field identifies the Print Server by name,
and each Print Server has a unique name. Unique names are
critical in a network with more than one Print Server. If the user
wishes to change the name, make sure to use unique names.
•
Raw Printing: This feature allows clients to print to the Print
Server using the standard TCP/IP printer port built into Windows
XP and 2000 instead of the Belkin Port Monitor. Using Raw
Printing requires the user to configure all port parameters
manually and is not recommended for users unfamiliar with TCP/
IP printing.
•
FTP Printing: This feature enables the printer to receive print jobs
sent by FTP (see FTP Printing for detailed instructions). Disabling
this feature will prevent FTP jobs.
Web Interface – Upgrade Firmware
This menu allows the user to upgrade the Print Server’s firmware. Before
running this application, download the new firmware from the Belkin website at
www.belkin.com. Be careful to take note of the location of the downloaded
file on your computer’s hard disk. After downloading, click “Browse” on the
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Web Configuration
1
2
screen shown below, select the file name of the downloaded firmware, then
click “Apply Changes”. The firmware upgrade will take a few minutes.
Note: Do not interrupt the process by removing power from the Print
Server or you could cause permanent damage to the device.
3
4
5
6
7
Web Interface – System Settings (Changing Password)
8
The Print Server ships with NO preset password. If you wish to set
a password for greater security, be sure to choose a password that
you will remember, and make a note of it. This utility will require you
to enter the new password twice. If you are entering a password for
the first time, leave the “current” password field blank. Press “Apply
Changes” when done.
9
10
The Web page auto-refresh interval setting can be changed in this
menu. If you want a slower or faster interval, choose a number in the
range and press “Apply Changes”.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing to Multiple Print Servers
If more than one Print Server is available on your network, and some
computers need to be able to print to more than one Print Server, you
will need to install the included Belkin Port Monitor (a virtual printer
port) software on your PC. The Belkin Port Monitor can then be
configured to select different Print Servers on your network to handle
specific print jobs.
Adding a Belkin Port Monitor and Configuring It for a Specific
Print Server
1. In Windows, select the printer’s properties and select the “Ports” tab.
2. Click “Add Port”.
A window showing the printer ports installed on the PC will open.
Select “Belkin Port” and, in the “Printer Ports” window, click
“New Port”.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing to Multiple Print Servers
1
2
3. In the “Enter New Port” window, enter a unique name for the port
and click “OK”.
3
4
4. Click “Close” on the “Printer Ports” window.
5
5. On the “Ports” tab, select the newly created port; click “Configure Port”.
6
7
8
9
10
6. On the next window (Belkin Port 2: Properties), click the “Locate
Servers” button.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing to Multiple Print Servers
7. On the “Available Servers” window, select the Print Server to
which you want to print.
8. Click “OK” to close. In the “Belkin Port 2: Properties” window,
the name of the Print Server you selected will appear in
the window.
9. Click “OK” to close.
10. Repeat these steps for each additional Print Server on
your network.
Warning: When configuring the Port Monitor to send jobs to a
specific Print Server, make sure that the correct port is selected
for the printer driver in Windows and that the corresponding
printer is actually connected to the Print Server that the port is
indicating. Mismatching printer drivers, ports, and Print Servers
will result in failed print jobs or error prints of multiple pages of
indiscernible characters.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Belkin Port Monitor Advanced Menu
1
2
In most cases, the Belkin Port Monitor (a virtual printer port) software
will be automatically installed and configured by the Print Server
Setup Wizard. Some advanced users may choose to manually
configure the Belkin Port Monitor software. This can be achieved by
using the Belkin Port Monitor’s Advanced Menu, which allows the
user to enter a specific Print Server’s IP address and to designate
a specific printer or “queue” for print jobs connected to that Print
Server. The Advanced Menu features help when there is more than
one Print Server available on your network, and when print jobs fail
because the Port Monitor cannot determine the name of the printer.
3
4
5
Opening the Belkin Port Monitor Advanced Menu
6
1. On the “Available Servers” window, select the Print Server to
which you want to print.
7
8
9
10
2. In the “Belkin Port: Properties” window, click the “Advanced” tab.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Belkin Port Monitor Advanced Menu
3. The Advanced Menu has fields to enter the Print Server’s IP
address and the queue name and the port number.
Note: The port number field by default is 515. In most cases, the
port number should not be changed.
Adding a Second Belkin Port Monitor and Configuring It for a
Specific Print Server
1. In Windows, select the printer’s properties and select the “Ports” tab.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Belkin Port Monitor Advanced Menu
1
2
2. Click “Add Port”. A window showing the printer ports installed on
the PC will open. Select “Belkin Port” and click “New Port”.
3
4
5
3. On the “New Port” window, enter a unique name for the port and
click “OK”.
6
7
8
4. Click “Close” on the “Printer Ports” window.
5. On the ‘Ports” tab, select the newly created port and click
9
“Configure Port”.
10
6. Click the “Advanced” tab.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Print Server for FTP Printing
7. Add the Print Server’s IP address and the queue name of the
printer you want to select for the port. The queue name “lp1” will
point the port to the printer connected to the printer 1 USB port
on the Print Server. The queue name “lp2” will point the port to
the printer connected to the printer 2 USB port on the
Print Server.
8. Click “OK” to close.
Warning: When manually configuring the Port Monitor to send
jobs to a specific printer, make sure that the correct printer driver
is selected and that the Port Monitor’s queue name corresponds
to the USB port that the printer is connected to on the Print
Server. Mismatching the drivers or queue names will result in
failed print jobs or error prints of multiple pages of
indiscernible characters.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Print Server for FTP Printing
1
2
Sending Print Jobs to Printers Connected to the Print Server
Using FTP
1. In Windows, select the printer’s properties.
3
4
5
6
7
8
2. Set the printer port to “File”, click “Apply”.
9
10
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Print Server for FTP Printing
3. Print the document using the printer that you configured. A
dialogue box will open prompting you to name the print file.
After naming the file, click “OK”. A file will be saved to the user’s
default Windows directory (typically “C:\” or “C:\Documents and
Settings\<user’s name>”).
4. On the Windows desktop, click “Start>Run” and type in “cmd” for
Windows XP and 2000 or “command” for Windows 98SE and Me;
click “OK” to open a “Command/MS-DOS Prompt” window.
5. At the prompt, type “ftp” followed by the IP address of the Print
Server; press the “Enter” key to create an FTP connection with
the Print Server.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Print Server for FTP Printing
1
2
6. When the connection is made, the user will be prompted to
enter a user name and a password. The user name for the Print
Server is “anonymous”; the password should be left blank. After
a successful login, a list of the printers connected to the Print
Server will appear, followed by simple usage instructions for how
to print the file.
3
4
5
6
7
7. At the prompt, type “put”, followed by the file path and file name,
8
followed by the printer number (for example, put c:\example printer1).
9
10
12
8. The file will be sent to the Print Server. When the transfer is
complete, another prompt will appear. If finished, type “quit” and
press “Enter” to end the FTP session. Then, close the “Command
Prompt” window.
Note: FTP Printing by default is enabled in the Print Server. It
can be disabled using the Print Server’s Web-Based
Setup Interface.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Cannot find Print Server
If the Wizard cannot find your Print Server even though it appears
to be functioning properly, the problem may be that the Ethernet
cable connected to the Print Server and Router may be loose.
Check to see that the Ethernet cable is connected properly and
try repowering the Print Server and your Router.
Note: When connecting your Print Server to your network, or
when you disconnect and reconnect or replace the router to
which your Print Server is connected, be sure to restore factory
defaults on the Print Server by holding in the reset button for 10
seconds while repowering the Print Server. This will restore the
IP address to dynamic to establish a new IP address to be used
with the new network or router.
• It could be that the computer is set to print to the wrong
printer. Verify that the printer connected to the Print Server
is set as the “default printer”.
• When troubleshooting a printing problem, try to determine
whether any of the computers on the network can access
the Print Server. If some computers can print, and some
cannot, then the problem is most likely not the Print Server
or the printer, but the printer driver settings on the specific
computer. In this case, run the Print Server Setup Wizard
again to reconfigure the computer. If this still doesn’t correct
the problem, delete the printer driver from your computer.
Reinstall it using the manufacturer’s CD that came with your
printer (it should direct you to check the manufacturer’s
website for updated drivers); then run the Setup Wizard
again. In some cases, drivers from a printer manufacturer
might support Print Servers in Windows XP or 2000, but
not Windows 98. Check the Belkin website for compatibility
• If none of the computers can access the Print Server,
then either:
1. The Print Server has not been configured correctly (in this
case, rerun the Setup Wizard);
2. Or, the printer you have connected to the Print Server does
not support a print-server connection. Check the Belkin
website for printer compatibility issues at:
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
1
2
If the Print Server has been configured before, and the IP
address has already been set to another subnet, the best solution
is to restore factory defaults on the Print Server. Do this by
holding down the reset button while repowering the Print Server.
After a reset, the Print Server will generally receive an IP address
in the correct subnet.
3
“No printer” error screen appears during setup. In most cases,
this error occurs when the printer is not powered on, or it is not
enabled (or online). After you have checked this, make sure that
it is not out of paper or jammed. Some printers “sleep” after
periods of inactivity. In any of these cases, restore the printer to
functionality, then, if necessary, reboot the Print Server. Some
USB printers are not compatible with Print Servers. To check the
Belkin website for compatibility information, go to:
4
5
6
7
8
9
10
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
“Cannot communicate with printer” or “printer not
found” error message appears in Printer Driver
Status Monitor
Again, this may result from:
If those issues are addressed and the problem still exists, Belkin
recommends that the user disable the Printer Driver Status
Monitor on the computer. The status monitor, a convenient
checkpoint for the user, usually requires a direct connection
between the computer and the printer. It may not communicate
with the printer when connected to a print server on a network.
Instead, use the Windows “Printer Status” window to check
printing status.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
1
2
Installation CD-ROM does not start Setup Utility
If the CD-ROM does not start the Setup Utility automatically, it
could be that the computer is running other applications that are
interfering with the CD drive.
3
If the Setup Utility screen does not appear within 15-20 seconds,
open up your CD-ROM drive by double-clicking on the “My
Computer” icon. Next, double-click on the CD-ROM drive that the
Installation CD has been placed in to start the installation. Then,
double-click on the icon named “Setup.exe”.
4
5
6
7
8
9
10
12
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Technical Support
support by phone, please call:
US: 877-736-5771
Europe: 00 800 223 55 460
Australia: 1800 666 040
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Information
1
2
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR
ELECTROMAGNETIC COMPATIBILITY
We, Belkin Corporation, of 501 West Walnut Street,
Compton, CA 90220, declare under our sole
responsibility that the product,
3
4
F1UP0301
5
to which this declaration relates,
complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device
must accept any interference received, including
interference that may cause undesired operation.
6
7
8
Caution: Exposure to Radio Frequency Radiation.
The radiated output power of this device is far below the FCC radio
frequency exposure limits. Nevertheless, the device shall be used in such
manner that the potential for human contact normal operation is minimized.
9
When connecting an external antenna to the device, the antenna shall be
placed in such a manner to minimize the potential for human contact during
normal operation. In order to avoid the possibility of exceeding the FCC radio
frequency exposure limits, human proximity to the antenna shall not be less
than 20cm (8 inches) during normal operation.
10
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy.
If not installed and used in accordance with the instructions, it may cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try and
correct the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the distance between the equipment and the receiver.
Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Information
Modifications
The FCC requires the user to be notified that any changes or modifications to
this device that are not expressly approved by Belkin Corporation may void
the users authority to operate the equipment.
Canada-Industry Canada (IC)
The wireless radio of this device complies with RSS 139 & RSS 210 Industry
Canada. This Class B digital complies with Canadian ICES-003.
Cet appareil numérique de la classe B conforme á la norme NMB-003 du Canada.
Europe-European Union Notice
Radio products with the CE 0682 or CE alert marking
comply with the R&TTE Directive (1995/5/EC) issued by the
Commission of the European Community.
Compliance with this directive implies conformity to the following European
Norms (in brackets are the equivalent international standards).
•
•
•
EN 60950 (IEC60950) – Product Safety
EN 300 328 Technical requirement for radio equipment
ETS 300 826 General EMC requirements for radio equipment.
To determine the type of transmitter, check the identification label
on your Belkin product.
Products with the CE marking comply with the EMC Directive (89/336/EEC)
and the Low Voltage Directive (72/23/EEC) issued by the Commission of the
European Community. Compliance with these directives implies conformity
to the following European Norms (in brackets are the equivalent international
standards).
•
•
•
•
•
EN 55022 (CISPR 22) – Electromagnetic Interference
EN 55024 (IEC61000-4-2,3,4,5,6,8,11) – Electromagnetic Immunity
EN 61000-3-2 (IEC610000-3-2) – Power Line Harmonics
EN 61000-3-3 (IEC610000) – Power Line Flicker
EN 60950 (IEC60950) – Product Safety
Products that contain the radio transmitter are labeled with CE 0682 or CE
alert marking and may also carry the CE logo.
Belkin Corporation Limited Lifetime Product Warranty
Belkin Corporation warrants this product against defects in materials and
workmanship for its lifetime. If a defect is discovered, Belkin will, at its
option, repair or replace the product at no charge provided it is returned
during the warranty period, with transportation charges prepaid, to the
authorized Belkin dealer from whom you purchased the product. Proof of
purchase may be required.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Information
1
2
This warranty does not apply if the product has been damaged by accident,
abuse, misuse, or misapplication; if the product has been modified without
the written permission of Belkin; or if any Belkin serial number has been
removed or defaced.
THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE
IN LIEU OF ALL OTHERS, WHETHER ORAL OR WRITTEN, EXPRESSED
OR IMPLIED. BELKIN SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED
WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
3
4
No Belkin dealer, agent, or employee is authorized to make any modification,
extension, or addition to this warranty.
5
BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF
WARRANTY, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT
NOT LIMITED TO, LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO
OR REPROGRAMMING OR REPRODUCING ANY PROGRAM OR DATA
STORED IN, OR USED WITH, BELKIN PRODUCTS.
6
7
Some states do not allow the exclusion or limitation of incidental or
consequential damages or exclusions of implied warranties, so the above
limitations of exclusions may not apply to you. This warranty gives you
specific legal rights, and you may also have other rights that vary from state
to state.
8
9
10
37
Download from Www.Somanuals.com. All Manuals Search And Download.
2-Port
USB Print Server
Belkin Tech Support
Belkin, Ltd.
US: 877.736.5771
7 Bowen Crescent • West Gosford
NSW 2250 • Australia
Tel: +61 (0) 2 4372 8600
Fax: +61 (0) 2 4372 8603
310.898.1100 ext. 2263
Europe: 00 800 223 55 460
Australia: 1800 666 040
Belkin Corporation
Belkin, B.V.
501 West Walnut Street
Compton • CA • 90220 • USA
Tel: 310.898.1100
Starparc Building • Boeing Avenue 333
1119 PH Schiphol-Rijk • The Netherlands
Tel: +31 (0) 20 654 7300
Fax: 310.898.1111
Fax: +31 (0) 20 654 7349
Belkin, Ltd.
Express Business Park • Shipton Way
Rushden • NN10 6GL • United Kingdom
Tel: +44 (0) 1933 35 2000
Fax: +44 (0) 1933 31 2000
© 2004 Belkin Corporation. All rights reserved. All trade names are registered trademarks of
respective manufacturers listed.
P74393
Download from Www.Somanuals.com. All Manuals Search And Download.
|