USER'S GUIDE
83V5 SERIES 220-240V
2
3
Thank You
Safety Instructions
Product View
4-5
6
Assembly
7-14
Operations
15
16-17
18
Maintenance and Care
Troubleshooting
Replacement Parts
18
19
20
Accessories and Formulas
Warranty
Consumer Services
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANTSAFETYINSTRUCTIONS
When using an electrical appliance,
basic precautions should be observed,
including the following:
■ Remove plug from electrical outlet before
cleaning or maintaining the appliance
■ Not intended for use by persons (including
children) with reduced physical, sensory or
mental capabilities, or lack of experience
and knowledge, unless they have been
given supervision or instruction concerning
use of the appliance by a person respon-
sible for their safety
REAd ALL INSTRUCTIONS
BEFORE USINg YOUR
dEEP CLEANER.
Always connect to a properly Earthed
outlet. Unplug from outlet when not in use
and before conducting maintenance or
■ Young children should be supervised to ensure
that they do not play with the appliance
troubleWshooAting.RNINg:To
■ Do not pick up toxic material (chlorine
bleach, ammonia, drain cleaner, petrol, etc.)
■ Do not modify the Earthed plug
reduce the risk of fire,
■ Do not use for any purpose other than
described in this User’s Guide
electric shock, or injury:
■ Use indoors only
■ Use only manufacturer’s recommended
attachments
■ Do not immerse; use only on surfaces
moistened by cleaning process
■ Use only cleaning products formulated
by BISSELL for use in this appliance to
prevent internal component damage
■ Keep openings free of dust, lint, hair, etc.
■ Keep appliance on a level surface
■ Turn off all controls before unplugging
■ Be extra careful when cleaning stairs
■ Do not leave machine when it is plugged in
■ Do not service machine when it is plugged in
■ If the supply cord is damaged, it must
be replaced by the manufacturer or its
service agent in order to avoid a hazard
■ Do not use machine if it has been
dropped, damaged, left outdoors or
dropped into water
■ Pay close attention when working
around children
■ Do not pull or carry by cord, use cord as a
handle, close door on cord, pull cord around
sharp corners or edges, run appliance over
cord, or expose cord to heated surfaces
SAVE THESE
INSTRUCTIONS
■ Do not carry the appliance while in use
FOR FUTURE USE
■ Do not unplug by pulling on cord;
unplug by grasping plug not the cord
This model is for household use only.
■ Do not handle plug or appliance with
wet hands
■ Do not put any object into appliance openings,
WARNING:
use with blocked opening or restrict air flow
This appliance must be Earthed
.
■ Do not expose hair, loose clothing, fingers
or body parts to openings or moving parts
IMPORTANT
FOR OPERATION ON A 220-240 VOLT
A.C. 50/60 Hz POWER SUPPLY ONLY.
■ Do not pick up hot or burning objects
■ Do not pick up flammable or combustible
materials (lighter fluid, petrol, kerosene,
etc.) or use in the presence of explosive
liquids or vapours
■ Do not use appliance in an enclosed space
filled with vapours given off by oil base
paint, paint thinner, some moth proofing
substances, flammable dust, or other
explosive or toxic vapours
If your appliance is fitted with a
nonrewireable BS 1363 plug it must not be
used unless a 13 amp (ASTA approved to BS
1362) fuse is fitted in the carrier contained
in the plug. (Spares may be obtained from
your BISSELL supplier). If for any reason the
plug is cut off, it must be disposed of, as it is
an electric shock hazard should it be inserted
into a 13 amp socket.
■ Do not operate the appliance unless the
belt door is securely assembled in the
location provided
3
w w w. b i s s e l l . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Product view
Ergonomically
Designed Handle
Handle Assembly
Heat Indicator
Heater Switch:
Turn heat on or off
as needed
Light/Built-in
Hot Water Heater
Lower Body Assembly
Integrated Carry Handle
™
ReadyTools Dial
Belt Access Door
Removable Nozzle
™
DirtLifter
™
Edge Sweep Brushes
PowerBrush
Optional Accessories:
These items are available for purchase. To order replacement parts, additional tools or formulas, please refer to page
18-19.
™
TurboBrush
3” Tough Stain
Brush
4” Upholstery
Tool
6” Stair Tool
Hard Floor Attachment
Spraying Crevice
Tool
Spraying 2 in 1
Crevice Tool
Mesh Tool Bag
(bag only)
4
w w w. b i s s e l l . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Product view
Spray Trigger
Cord Clip
™
Quick Release
Cord Wrap
Tough Stain Tool
Hose Secure Latch
Power Cord
Ready-to-Use
Hose
WARNING:
To reduce the risk of fire and
electric shock due to internal com-
ponent damage, use only BISSELL
cleaning formulas intended for
use with the deep cleaner. Non-
BISSELL cleaning formulas may
harm the machine and void the
warranty.
™
2-in-1 Water Tank
Includes built in formula
measuring cup
Power Switch
Large, Easy-To-
Maneuver Wheels
Handle Release
Cleaning formula:
Keep plenty of genuine BISSELL 2X advanced cleaning formula on hand so you can clean
and protect whenever it fits your schedule. Always use genuine BISSELL deep cleaning
formulas. Non-BISSELL cleaning formulas may harm the machine and will void the warranty.
473 mL
651 mL
BISSELL
Tough
709 mL
709 mL
709 mL
709 mL
709 mL
BISSELL 2X
Hard Floor
Solutions
#56L9-E
BISSELL
BISSELL 2X
Pet Stain
BISSELL
BISSELL 2X
Multi-Allergen
Advanced
Formula with
Scotchgard™
protector
BISSELL 2X
Natural
2X Fibre
2X Lavendar
Essence
Stain
Cleansing
Advanced
Formula with
Scotchgard™
protector
& Odor
Orange
Precleaner
#0400-E
Advanced
Formula with
Scotchgard™
protector
Advanced
Formula with
Scotchgard™
protector
Advanced
Formula with
Scotchgard™
protector
#89Q5-E
#62E5-E
#99K5-E
#34B5-E
#83P3-E
5
w w w. b i s s e l l . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Your Healthy Home Fresh Clean comes
in four easy to assemble components:
WARNING:
Do not plug in your cleaner
until you have completely
assembled it per the
instructions and are familiar
with all instructions and
operating procedures.
• Handle assembly
• Upper hose rack
• Lower body assembly
• Lower hose rack
Four Phillips head screws are included,
2 long and 2 short. They can be found
taped to the handle assembly.
The only tool you will need to assemble
your cleaner is a Phillips head
screwdriver.
Tip: Deep cleaning carpeting
regularly can reduce dust and
allergens in your home.
1. Slide handle assembly onto lower body
and secure with two long screws.
2. Attach upper hose rack to back of handle
assembly by pushing into open slots and
sliding down until it snaps into place.
1.
2.
3.
4.
3. Attach lower hose rack by sliding in place
on lower body assembly and securing
with 2 short screws.
4. Attach Tough Stain tool to end of hose.
5. Wrap flex hose around hose rack and
secure it into notched out holder as
shown.
6. Keep flex hose locked in place with hose
secure latch.
5.
6.
Hose Secure Latch
6
w w w. b i s s e l l . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Special features
Your BISSELL Healthy Home Fresh Clean
is a home cleaning system that uses a
combination of heat, BISSELL advanced
cleaning formula, brush
agitation and suction to safely clean
carpets.
Heater
Switch
Built-In-Heater
BISSELL Healthy Home Fresh Clean models all
feature a patented built-in heater which will heat
the hand hot tap water you put in it to safely
optimise cleaning effectiveness. The heater will
never allow the temperature to exceed 82°C
degrees. The heater switch, which is located on
the side of the machine, controls the heater so
you have the option to turn off the heat if you
are cleaning delicate wool or oriental rugs.
DirtLifter™ PowerBrush
The DirtLifter PowerBrush is designed to
enhance cleaning performance. The bristle
pattern safely lifts out the deep down dirt while
gently grooming carpet fibers. The floating suspen-
sion self-adjusts to all carpet heights. When the
power is ON and the machine is in the upright
position, your carpet is protected because the
brushes are lifted up off the carpet.
ReadyTools™
Dial
ReadyTools™ Dial
The ReadyTools feature allows you to choose
between FLOOR CLEANING or cleaning with
TOOLS simply by turning the dial. The TOOLS
setting allows for above floor cleaning of
upholstery, stairs, along baseboards, and other
hard to reach areas. Simply choose the tool that
is appropriate for the job, attach to flex hose and
you are ready to go.
WARNING:
To reduce the risk of fire,
use only BISSELL advanced
cleaning formula for full size
machines in your deep cleaner.
Use of cleaning formulas that
contain lemon or pine oil may
damage this appliance and
void the warranty. Chemical
spot cleaners or solvent-based
soil removers should not be
used. These products may
react with the plastic materi-
als used in your deep cleaner
causing cracking or pitting.
®
Microban antibacterial protection
Microban antibacterial protection helps prevent
the growth of harmful common household bacteria
including E. coli, Salmonella and Staph. a. It helps
to keep the unit fresher and cleaner between uses.
7
w w w. b i s s e l l . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Special features continued
Scotchgard™ Protector
Carpet protection applied at the mill typically
wears down over time from heavy foot traffic
and everyday cleaning, including deep
cleaning. To help restore this important
protection, only BISSELL offers cleaning
formulas with Scotchgard protector. This offers
extra protection against dirt and tough stains
to keep your carpets looking good longer.
To maintain your Scotchgard 5-year limited
stain warranty, you no longer are required
to hire a professional. By using your BISSELL
machine with BISSELL formulas containing
Scotchgard protector every 12 months, your
carpet warranty from 3M remains in effect.
No other home deep cleaning system can do
this for you.
Measuring
Cup
Measuring cup
Your deep cleaner is equipped with a
measuring cup for adding the proper amount
of formula to the 2-in-1 water tank. For
convenience the measuring cup is built into
the lid of the 2-in-1 water tank.
Carry
Handle
2-in-1 water tank
Our 2-in-1 water tank system is designed with
a heavy duty bladder inside for clean water.
As you clean, the clean water and formula in
the bladder will empty. Dirty water pulled out
of your carpet will collect around the outside
of the bladder so clean and dirty water are
always kept separate. This allows the user to
maximize tank space, yet only carry one tank
to and from the sink for emptying and filling.
Removable Nozzle
Cleaning up your machine after you're done
has never been easier! Nozzle pops off for
rinsing in the sink.
8
w w w. b i s s e l l . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Before you clean
1. Plan activities to give your carpet time
to dry.
2. Move furniture to another area if
cleaning an entire room (optional).
3. Vacuum area with a dry vacuum
EXIT
12
cleaner before deep cleaning.
9
10
7
4. Plan your cleaning route to leave an exit
path. It is best to begin cleaning in the cor-
ner farthest from your exit.
6
5
3'
1
AR
ST
T
2
HERE
4'
3
4
5. Pretreating (optional)
Pretreating is recommended to improve
cleaning effectiveness for heavily soiled
carpet in high traffic areas such as entry
ways and hallways.
To pretreat:
A. Using the BISSELL Tough Stain
Precleaner, generously spray evenly
over soiled area, do not overwet.
B. Wait 3-5 minutes before deep
cleaning.
C. Clean as normal using your BISSELL
deep cleaner.
ATTENTION:
Some Berber carpets have a
tendency to fuzz with wear.
Repeated strokes in the
same area with an ordinary
vacuum or deep cleaner may
aggravate this condition.
9
w w w. b i s s e l l . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Fill the 2-in-1 water tank
2.
4.
6.
1.
3.
5.
1. Remove the tank from the base of the
machine by lifting the tank carry handle.
2. Carry like a bucket to the sink. Rotate the
handle forward to unlatch the lid. Remove
lid, turn over and locate built in measuring
cup.
3. Fill with BISSELL 2X formula to the indicat-
ed fill line on the built in measuring cup
and pour into mouth of the bladder.
4. Fill the bladder with clean hand hot tap
water.
*Do not boil or microwave water
as it can destroy the bladder.
5. Replace the top of the tank by matching
the lid and tank edges. Handle must be in
the forward position in order to replace
lid. Rotate the handle to the carrying
position to latch the lid.
Note: Remember to secure the lid
and test to make sure it is secure
before picking up the tank.
6. Place tank into machine base, seating firmly
in place. Rotate tank handle back into
latched position.
WARNING:
To reduce the risk of fire and
electric shock due to internal
component damage, use
only BISSELL cleaning
formulas intended for use
with the deep cleaner.
Non-BISSELL cleaning
formulas may harm the
machine and void the
warranty.
10
w w w. b i s s e l l . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Carpet cleaning
Tip:
1. Plug the deep cleaner into a proper
outlet. Set ReadyTools dial to the FLOOR
CLEANING setting. Turn the power on
by pressing the red power switch on
the back of the unit with your foot. Turn
heater switch (located on side of unit)
to the on position. Allow one minute for
the built-in heater to warm up before
cleaning.
Thorough vacuuming before deep
cleaning will prevent early clogging
of the lint trap.
NOTE: The Heathly Home Fresh
Clean will be fully warmed and
will provide optimal performance
after one minute of continuous
heated cleaning.
Handle Release Power Switch
2. With your foot, press the gray handle
release lever located on the back of unit
below water tank to detent handle.
3. While pressing the spray trigger, make
one slow forward wet pass and another
back. Let the built-in heater, BISSELL 2X
advanced deep cleaning formula and
DirtLifter PowerBrush do the work for
you. Caution: Do not overwet.
Heater Switch
4. Release the spray trigger and make one
slow forward and backward pass over
the same area to remove any residual
dirty water and aid in drying.
5. Repeat cleaning passes until solution
being suctioned up appears clean.
Continue passes without pressing the
spray trigger until you can’t see any
more water being suctioned up.
11
w w w. b i s s e l l . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Empty the 2-in-1 water tank/clean removable nozzle
1. Turn power switch off. Remove the 2-in-1
water tank from the base using the tank
2.
1.
3.
5.
carry handle. Carry the tank like a bucket to
a utility sink or outside where you will
dispose of the collection water. Remove the
top of the tank by rotating the handle for-
ward to unlatch lid and lifting lid off tank.
2. Empty collection water from bottom of tank.
3. After each use, remove and rinse the lint
Lint Screen
screen located on the tank lid.
4.
4. If nozzle needs to be cleaned, remove by
grasping handle at the top and pulling
forward. Clean removable nozzle by
rinsing under running water.
5. When finished, replace nozzle by slightly
raising front of machine to line up slots on
the base with the hooks on nozzle. Attach at
base first and then click nozzle into place.
NOTE: If nozzle is not attached
properly loss of suction will occur.
6. To continue carpet cleaning, refer back to
pages 10 through 11, beginning with “Fill
the 2-in-1 water tank” on page 10.
If cleaning is complete, refer to the
“Maintenance and care” section on page 15.
ReadyTools™
Your Healthy Home Fresh Clean comes
equipped with a hose and at least one
attachment for cleaning stairs, upholstery,
and more.
Important! If using the machine to clean
upholstery, check upholstery tags.
1. Check manufacturer’s tag before cleaning.
“W” or “WS” on the tag means you can use
your deep cleaner. If the tag is coded with “X”
or “S” (with a diagonal strike through), or says
“Dry Clean Only,” do not proceed. Do not use
on velvet or silk. If manufacturer’s tag is missing
or not coded, check with your furniture dealer.
2. Check for colourfastness in an inconspicu-
ous place.
Manufacturer’s tag
3. If possible, check upholstery stuffing. Coloured
stuffing may bleed through fabric when wet.
4. Plan activities to give upholstery time to
dry.
12
w w w. b i s s e l l . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
ReadyTools™ continued
5. Vacuum thoroughly to pick up loose
debris and pet hair. Use a vacuum with
a brush attachment and a crevice tool to
clean in fabric folds and tufts.
7.
6. To begin cleaning with attachments,
follow the instructions on page 10 for
filling the 2-in-1 water tank.
7. Set the ReadyTools dial to the TOOLS setting.
This will allow spray and suction from the hose.
8. Attach the cleaning tool of your choice to
the end of the hose.
9. Clean by pressing the spray trigger to spray
solution onto the area to be cleaned. Slowly
move the tool back and forth over the soiled
surface. Release the spray trigger to suction dirty
water. Continue to clean in the area, working in
small sections, until dirt is removed.
Caution: Do Not Overwet.
10. When finished cleaning, remove and
rinse tool(s) in clean, running water.
11. It is recommended that you suction clean
12.
11.
water from the tap to rinse out the hose.
12. Before wrapping hose onto tool rack, lift
end of hose and stretch out to ensure all
water is cleared from hose.
13. Wrap flex hose around tool rack.
14. Empty 2-in-1 water tank and rinse out,
Run water through here
following instructions on page 12.
16.
15.
15. If the ReadyTools dial becomes difficult to
turn, the diverter assembly that holds the
dial may need to be cleaned. To clean, first
remove nozzle and locate screw that holds
the diverter assembly in place. With a Phillips
screwdriver, remove the screw and set aside.
16. Remove diverter assembly; hold under running
water making sure water flows through and
around the dial. Turn the dial about 10 times
clockwise and 10 more times counter
Screw
clockwise. This should free up any debris.
17. Wipe diverter assembly with a soft cloth and
replace back on machine. Replace nozzle.
18. Return ReadyTools dial to FLOOR
CLEANING setting.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Hard Floor Cleaning
Your Healthy Home Fresh Clean may
have included a hard floor tool and 2X
Hard Floor Solutions. The hard floor tool
provides effective cleaning for linoleum,
vinyl, and tile floors.
Caution: Do not use on unsealed
hardwood floors.
1. Thoroughly vacuum or sweep floor to pick
up any debris.
NOTE: Prior to filling with formula
and water be sure all carpet cleaning
formula is thoroughly rinsed from the
2-in-1 water tank.
2. Fill BISSELL Hard Floor Solutions to the
indicated fill line in the built in measuring
cup and pour into mouth of bladder.
3. Fill the bladder with clean hand hot tap
water and set aside.
4. Attach the hard floor tool to the bottom of
the machine by hooking it into the nozzle
and swinging it down until it clicks into
place.
4.
5. Be sure the ReadyTools dial is set to
FLOOR CLEANING.
6. Plug into an outlet and turn the power on.
7. Plan your cleaning route to leave an exit
path. Be sure to allow adequate time for
floors to dry.
8. While pressing the spray trigger, make
one slow forward wet pass and another
back.Caution: Do Not Overwet.
9. Repeat the motion without pressing the
spray trigger using the hard floor tool to
squeegee and suction up the dirty water.
10. When finished, remove hard floor tool,
rinse and let dry before storing. Refer
to the Maintenance and care section on
page 15 for machine clean up and
storage instructions.
14
w w w. b i s s e l l . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and care
Machine care
For best results, a few simple steps can
assure your machine is well maintained
after cleaning is complete.
1. Turn power switch off. Unplug the
machine and wrap the power cord.
2 . After emptying the 2-in-1 water tank, rinse
it with running hand hot tap water, tak-
ing care to clean underneath and around
the heavy duty bladder. Clean out red lint
screen. Removable nozzle may be rinsed if
necessary. Refer to page 12.
3. Replace the 2-in-1 water tank on the
machine.
4. Any loose hair or debris can be pulled
from the brush roll and thrown away.
5. To clean attachments, remove from hose and
rinse in clean, running water. Dry before
storing. Clean the hose by suctioning clean
water from the tap. Before wrapping back
on machine, lift end of hose and stretch out
to ensure all water is cleared from hose.
Refer to page 13, illustrations 11 and 12.
6. Wipe the machine’s exterior with a soft
cloth.
7. After carpet is dry, vacuum again to
remove hair and fuzz.
Machine storage
Put the unit away in a closet or
basement for the next use. Store
cleaner in a protected, dry area. Since
this product uses water, it must not be
stored where there is a danger of
freezing. Freezing will damage internal
components and void the warranty.
15
w w w. b i s s e l l . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
WARNING:
To reduce the risk of electric
shock, or injury, unplug from the
outlet before servcing
Heat indicator light does not illuminate
Possible Causes
Remedies
1. The heater switch is not turned on.
1. Turn on the heater switch located on side of unit.
2. The machine power switch is not turned on.
2. Both switches must be on to activate the heat
indicator light.
Reduced spray OR no spray
Possible cause
Remedies
1. Bladder may be empty.
1. Turn power switch off; refill bladder with clean hand hot tap
water and formula.
2. 2-in-1 water tank may not be seated properly.
3. Pump may have lost prime.
2. Turn power switch off; remove tank and reseat.
3. Turn power switch off; after 1 minute turnon anddepress
spraytrigger.
4. The pump belt may be broken.
4. Turn power switch off and unplug from theoutlet. Tocheck
ifapumpbelthasbroken, you will need a flat head
screwdriver. A. Insert the blade end into the slot of the
belt access door to release. Examine the belt for breakage.
You should be able to see the pump belt looped around
the motor shaft. If it is broken or missing, please refer to
ReplacementPartsonpage18. Areplacement beltmaybe
orderedby calling BISSELL Consumer Services. Complete
installation instructions will accompany the replacement belt.
B. Whenreplacingbeltaccessdoorbesureto line up slots of
belt access door with slots inmachine,slidedoorintoplaceand
snapshut.
A.
B.
Slots Pump Belt
16
w w w. b i s s e l l . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
DirtLifter PowerBrush does not turn
Possible cause
Remedies
1. The brush belt or pump belt is off or broken.
1. Refer to Remedy 4 on page 16 to check if brush belt or
pump belt is broken.
Cleaner not picking up solution
Possible cause
Remedies
1. ReadyTools dial may be on the wrong setting
for the cleaning job.
1. Set ReadyTools dial to either FLOOR CLEANING or TOOLS.
2. Poor tool position. (Hand held attachments only).
3. Removable nozzle may not be properly attached.
2. Adjust angle; apply more downward pressure.
3. Make sure nozzle is on correctly by slightly raising front
of machine to line up slots on the base of the machine
with the hooks on nozzle. Attach at base first and
then click nozzle into place. Refer to image 5 on page 12.
4. 2-in-1 water tank lid is not properly installed.
5. 2-in-1 water tank is not properly seated.
4. Re-install lid; refer to the images on page 10.
5. 2-in-1 water tank must be firmly seated to function;remove
andreseat2-in-1watertank.
6. 2-in-1 water tank has picked up maximum dirty water.
7. The lint screen may be clogged.
6. Empty 2-in-1 water tank and refill, refer to the Operation
section.
7. Clean out lint screen. Refer to page 12.
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.
17
w w w. b i s s e l l . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacement parts
Item
Part No.
203-0104
203-0102
203-0124
215-0628
015-0621
203-0105
Part Name
1
2
3
4
5
6
Tank Assembly Complete
Tank Base
Removable Nozzle
Replacement Pump Belt (with instructions)
Replacement Brush Belt (with instructions)
Lint Screen
1
2
3
4
5
6
Accessories and formulas
While not all of these parts may not have come with your machine, all are
available to you for purchase, if desired.
Item
Part No.
203-0149
203-6651
203-6653
203-6654
203-6652
203-0116
203-6655
210-3040
62E5-E
Part Name
1
Hard Floor Tool
2
3" Tough Stain Tool
3
4" Upholstery Tool
4
6" Stair Tool
5
Powered TurboBrush™ Hand Tool
Spraying 2-in-1 Crevice Tool w/Brush
Spraying Crevice Tool
6
7
8
Mesh Tool Storage Bag
9
709 mL BISSELL 2X Fibre Cleansing Advanced Formula
709 mL BISSELL 2X Multi-Allergen Advanced Formula
709 mL BISSELL 2X Pet Stain & Odor Advanced Formula
709 mL BISSELL 2X Natural Orange Advanced Formula
709 mL BISSELL 2X Lavender Essence Advanced Formula
473 mL BISSELL 2X Hard Floor Solutions
651 mL Tough Stain Precleaner
10
11
12
13
14
15
89Q5-E
99K5-E
83P3-E
34B5-E
56L9-E
0400-E
1
2
3
4
5
6
7
8
9
10
15
11
12
13
14
18
w w w. b i s s e l l . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty - BISSELL Healthy Home Fresh Clean™
This warranty gives you specific legal rights, and you may also have other rights which may
vary from country to country. If you need additional instruction regarding this warranty or have
questions regarding what it may cover, please contact BISSELL Consumer Services by
telephone, or regular post as described below, or contact your local in country distributor.
Limited Two Year Warranty
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, BISSELL Homecare, Inc.,
will replace (with new or remanufactured components), at BISSELL’s option, free of charge
from the date of purchase by the original purchaser, for two years any defective or
malfunctioning part do to manufacturers defect.
This warranty applies to product used for personal, and not commercial or rental service. This
warranty does not apply to fans or routine maintenance components such as filters, belts, or
brushes. Damage or malfunction caused by negligence, abuse, or use not in accordance with
the User’s Guide is not covered.
For UK inquiries:
For all other inquiries:
Monday - Thursday 9 am — 5 pm
Monday - Friday 8 am — 4 pm
Friday
9 am — 4 pm
BISSELL Homecare, Inc.
PO Box 1888
Grand Rapids, Michigan 49501 USA
Telephone: 01-616-453-4451
Fax: 01-616-453-1383
BISSELL Homecare (Overseas)
The Boat Yard
105 Straight Road
Old Windsor
Berkshire, SL4 2SE
United Kingdom
Telephone: 0844-888-6644
BISSELL HOMECARE INC. IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES OF ANY NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT.
BISSELL’S LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT.
*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER ORAL OR
WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION OF LAW, INCLUDING
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED TO THE TWO YEAR DURATION FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE.
19
w w w. b i s s e l l . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
BISSELL consumer services
If your BISSELL product should require service:
Call BISSELL Consumer Services at the numbers below and we will give you the location of a
BISSELL Authorized Service Center in your area. If you have questions about your warranty or
need replacement parts please contact the numbers below.
For UK inquiries:
For all other inquiries:
Monday - Thursday 9 am — 5 pm
Monday - Friday 8 am — 4 pm
Friday
9 am — 4 pm
BISSELL Homecare, Inc.
PO Box 1888
Grand Rapids, Michigan 49501 USA
Telephone: 01-616-453-4451
Fax: 01-616-453-1383
BISSELL Homecare (Overseas)
The Boat Yard
105 Straight Road
Old Windsor
Berkshire, SL4 2SE
United Kingdom
Telephone: 0844-888-6644
Or visit the BISSELL website - www.bissell.com
When contacting BISSELL, have model number of cleaner available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
NOTE: Please keep your original sales receipt. It
provides proof of purchase date in the event of a
warranty claim. See Warranty on page 19 for details.
©2011 BISSELL Homecare, Inc
Grand Rapids, Michigan
All rights reserved. Printed in China
Part Number 120-4315
Rev 11/10
Visit our website at:
Scotchgard is a trademark of 3M
Microban® is a registered trademark
of Microban Products Company
20
w w w. b i s s e l l . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
|