Canon Scanner M11058 User Manual

Setup Guide  
Read This First  
Please read this manual before using the scanner.  
After you finish reading this manual, keep it in a safe place  
for future reference.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
libjpeg  
OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO  
EVENT SHALL THE COPYRIGHT OWNER OR  
CONTRIBUTORS BE LIABLE FOR ANY DIRECT,  
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR  
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT  
LIMITED TO, PROCUREMENT OF SUBSTITUTE  
GOODS OR SERVICES; LOSS OF USE, DATA, OR  
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER  
CAUSED AND ON ANY THEORY OF LIABILITY,  
WHETHER IN CONTRACT, STRICT LIABILITY, OR  
TORT (INCLUDING NEGLIGENCE OR OTHERWISE)  
ARISING IN ANY WAY OUT OF THE USE OF THIS  
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY  
OF SUCH DAMAGE.  
Portions of this software are based in part on the work of the  
Independent JPEG Group.  
Copyright 2007 by CANON ELECTRONICS INC. All rights  
reserved.  
No part of this publication may be reproduced or transmitted  
in any form or by any means, electronic or mechanical,  
including photocopying and recording, or by any information  
storage or retrieval system without the prior written  
permission of CANON ELECTRONICS INC.  
MD5  
derived from the RSA Data Security, Inc. MD5 Message-  
Digest Algorithm  
Copyright (c) 1998 - 2002, Paul Johnston & Contributors  
All rights reserved.  
Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN  
MERCURY AND MUST BE RECYCLED OR DISPOSED  
OF ACCORDING TO LOCAL, STATE OR FEDERAL  
LAWS.  
Redistribution and use in source and binary forms, with or  
without modification, are permitted provided that the  
following conditions are met:  
Disclaimers  
The information in this document is subject to change without  
notice.  
Redistributions of source code must retain the above  
copyright notice, this list of conditions and the following  
disclaimer. Redistributions in binary form must reproduce the  
above copyright notice, this list of conditions and the  
following disclaimer in the documentation and/or other  
materials provided with the distribution.  
CANON ELECTRONICS INC. MAKES NO WARRANTY  
OF ANY KIND WITH REGARD TO THIS MATERIAL,  
EITHER EXPRESS OR IMPLIED, EXPECT AS  
PROVIDED HERE IN, INCLUDING WITHOUT  
LIMITATION, THERE OF, WARRANTIES AS TO  
MARKETABILITY, MERCHANTABILITY, FITNESS  
FOR A PARTICULAR PURPOSE OF USE OR NON-  
INFRINGEMENT. CANON ELECTRONICS INC. SHALL  
NOT BE LIABLE FOR ANY DIRECT, INCIDENTAL, OR  
CONSEQUENTIAL DAMAGES OF ANY NATURE, OR  
LOSSES OR EXPENSES RESULTING FROM THE USE  
OF THIS MATERIAL.  
Neither the name of the author nor the names of its  
contributors may be used to endorse or promote products  
derived from this software without specific prior written  
permission.  
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT  
HOLDERS AND CONTRIBUTORS "AS IS" AND ANY  
EXPRESS OR IMPLIED WARRANTIES, INCLUDING,  
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
About the Fingerprint Sensor  
2. Removing the Packing Materials and  
Attaching the Feed Roller.................................... 9  
3. Installing the Scanner and Connecting to a  
Network ............................................................. 12  
Configuring the Date and Time and Confirming  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Thank you for purchasing the Canon imageFORMULA ScanFront 220/220P network scanner.  
Please read this manual thoroughly before using the scanner to familiarize yourself with its capabilities, and to make the most of its  
many functions. After reading this manual, store it in a safe place for future reference.  
About ScanFront 220/220P  
The ScanFront 220/220P is a network scanner that you can use without connecting to a computer.  
You can transfer the data of an image scanned with the ScanFront 220/220P to a shared folder on a server PC or client PC on the  
network or to an FTP server, or deliver it to a remote location via e-mail. It is also possible to use the image data in a location with  
no network environment if you save the image file to USB memory.  
Shared Folder  
(Server PC, Client PC)  
Network  
Save File  
Save File  
Send E-mail  
FTP Server  
Mail Server  
ScanFront 220  
Save File  
USB Memory  
Conceptual Diagram of the ScanFront  
* Transfer to an FTP server is possible only for an FTP server that does not require firewall settings.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Manuals for the Scanner  
Symbols Used in This Manual  
The following manuals are provided with the Canon  
ScanFront 220/220P. Be sure to read these manuals  
thoroughly before using the scanner.  
The following symbols are used in this manual to explain  
procedures, restrictions, handling precautions, and  
instructions that should be observed for safety.  
Setup Guide (This Manual)  
WARNING  
Describes the procedure for setting up the scanner for  
scanning. Set up the ScanFront in accordance with the  
Setup Guide. For details on the ScanFront, refer to the  
Operation Guide* and ScanFront 220/220P  
Indicates a warning concerning operations that may lead to  
death or injury to persons if not performed correctly. To  
use the scanner safely, always pay attention to these  
warnings.  
INSTRUCTIONS (electronic manuals).  
Operation Guide*  
CAUTION  
Provides an overview of the functions of the scanner, and  
describes the basic operations for using the ScanFront. For  
details on the settings of the ScanFront, refer to the  
ScanFront 220/220P INSTRUCTIONS (electronic  
Indicates a caution concerning operations that may lead to  
injury to persons, or damage to property if not performed  
correctly. To use the scanner safely, always pay attention  
to these cautions.  
manual).  
* A print version of this guide is supplied in English. PDF files of  
the Operation Guide in other languages can be found on the  
INSTRUCTIONS CD-ROM.  
IMPORTANT  
Indicates operational requirements and restrictions. Be  
sure to read these items carefully to operate the scanner  
correctly, and avoid damage to the scanner.  
INSTRUCTIONS: Electronic Manual  
Describes how to use the scanner, and includes  
instructions for configuring the scanner settings, as well as  
handling, maintenance, and troubleshooting information.  
This manual is stored as a PDF file on the supplied  
INSTRUCTIONS CD-ROM and requires Adobe Reader  
to open. (You can download Adobe Reader from the  
Adobe Web site.)  
Hint  
Indicates a clarification of an operation, or contains  
additional explanations for a procedure. Reading these  
notes is highly recommended.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Important Safety Instructions  
To ensure the safe operation of this scanner, be sure to read the safety warnings and precautions described below.  
Avoid exposing the scanner to rapid changes in  
Installation Location  
temperature. If the room in which the scanner is  
installed is cold but rapidly heated, water droplets  
(condensation) may form inside the scanner. This  
may result in a noticeable degradation in scanning  
quality.  
The performance of this scanner is affected by the  
environment in which it is installed. Make sure that the  
location where the scanner is installed meets the following  
environmental requirements.  
The following conditions are recommended for  
optimal scanning quality:  
Room temperature: 10 °C to 32.5 °C (50 °F to  
90.5 °F)  
Provide adequate space around the scanner for  
operation, maintenance, and ventilation.  
Humidity: 20% to 80% RH  
Avoid installing the scanner near equipment that  
generates a magnetic field (e.g. speakers,  
televisions, or radios).  
At least  
400 mm  
Power  
At least  
600 mm  
Connect only to a power outlet of the rated voltage  
and power supply frequency (220-240 V, 50/60  
Hz).  
Avoid installing the machine in direct sunlight. If  
this is unavoidable, use curtains to shade the  
scanner.  
Do not connect other electrical equipment to the  
same power outlet to which the scanner is  
connected. Also, when using an extension cord,  
make sure that the extension cord is rated for the  
current requirements of the scanner.  
Avoid locations where a considerable amount of  
dust accumulates.  
Avoid warm or humid locations, such as in the  
vicinity of a water faucet, water heater, or  
humidifier, and avoid locations where the fumes  
from ammonia, paint thinner, or other volatile  
chemicals may be present.  
Never try to disassemble the AC adapter or modify  
it in any way, as this is extremely dangerous.  
The power cord and AC adapter may become  
damaged if they are often stepped on or if heavy  
objects are placed on them. Continued use of a  
damaged power cord and AC adapter can lead to  
an accident, such as a fire or electrical shock.  
Avoid locations that are subject to vibration.  
Do not use the power cord while it is coiled.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Do not pull directly on the power cord. When  
disconnecting the power cord, grasp the plug and  
remove it from the outlet.  
Do not cut, damage, or modify the power cord or  
AC adapter. Do not place heavy objects on the  
power cord or AC adapter, and do not pull or  
excessively bend the power cord.  
Keep the area around the power plug clear of  
objects so that the power cord can be  
disconnected easily in an emergency.  
Never connect the power cord when your hands  
are wet.  
Use only the AC adapter provided with this  
scanner. Also, do not use the AC adapter provided  
with the scanner with any other electrical devices.  
Model: MG1-3968  
Do not connect the scanner to a multiplug power  
strip.  
Do not knot or coil the power cord, as this may  
result in a fire or electric shock. When connecting  
the power cord, make sure that the power plug is  
securely and completely inserted into the power  
outlet.  
If you have any questions regarding the power  
supply, contact your local authorized Canon dealer  
or service representative for further information.  
Do not use power cords and AC adapters other  
than the power cord and AC adapter provided with  
this scanner.  
Moving the Scanner  
When moving the scanner, always hold it with both  
hands to avoid dropping it. The weight of the  
scanner unit is approximately 3.4 kg.  
Never try to take the scanner apart or modify it in  
any way.  
Before moving the scanner, make sure the  
document tray is closed and the interface cable  
and AC adapter are disconnected. If the scanner is  
transported with these items connected, the plugs  
and connectors may be damaged due to  
Never try to take the AC adapter apart or modify it  
in any way, as this is dangerous and may lead to a  
fire or electric shock.  
Do not use flammable aerosol sprays near the  
scanner.  
excessive force applied to them during movement.  
When cleaning the scanner, turn the power OFF  
and disconnect the power cord from the power  
supply.  
Handling  
Clean the scanner using a slightly dampened cloth  
which has been well wrung out. Never use alcohol,  
benzene, paint thinner, or any other flammable  
substances.  
WARNING  
Note the following precautions whenever using the  
scanner. Failure to do so may result in a fire or  
electric shock.  
Never use alcohol, benzene, paint thinner, aerosol  
sprays, or any other highly flammable substance  
near the scanner.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
If the scanner makes strange noises, or gives off,  
smoke, heat, or strange odors, or the scanner  
does not function or other abnormalities occur  
when you use the machine, immediately turn the  
power OFF, and disconnect the power plug from  
the power outlet. Then, contact your local  
authorized Canon dealer or service representative  
for further information.  
Do not install the scanner in a humid or dusty  
location. Doing so may result in a fire or electric  
shock.  
Do not place objects on top of the scanner, as they  
may tip over and fall, resulting in personal injury.  
Do not use the scanner with a power supply  
voltage other than 220-240 VAC. Doing so might  
cause fire or electric shock.  
Do not drop the scanner, or subject it to impact or  
strong shock. Should the scanner ever become  
damaged, immediately turn the power OFF, and  
disconnect the power plug from the power outlet.  
Then, contact your local authorized Canon dealer  
or service representative to have the unit serviced.  
When disconnecting the power cord, grasp it firmly  
by its plug. Do not pull directly on the power cord,  
as this may damage or expose the cord’s internal  
wiring, resulting in a fire or electric shock.  
Leave sufficient space around the power plug so  
that it can be disconnected easily. If objects are  
placed around the power plug, you will be unable  
to disconnect it in an emergency.  
Before moving the scanner, make sure to turn the  
power OFF, and disconnect the power plug from  
the power outlet.  
Do not allow water or flammable substances  
(alcohol, paint thinner, benzene, etc.) to spill into  
the scanner, as this may result in a fire or electric  
shock.  
CAUTION  
Do not install the scanner on a surface that is  
unstable or tilted, or in an area subject to  
excessive vibrations, as this may cause the  
scanner to fall, resulting in personal injury or  
damage to the scanner.  
Turn OFF the power for safety when not using the  
scanner for a long period of time, such as  
overnight. Also, turn OFF the power, and  
disconnect the AC adapter from the scanner and  
disconnect the power cord from the power outlet  
for safety when the machine will not be used for an  
extended period of time, such as during  
consecutive holidays.  
Do not block the ventilation openings. Doing so  
could cause the scanner to overheat, creating a  
risk of fire.  
Never place small metal objects such as staples,  
paper clips, or jewelry on the scanner. These items  
may fall into the scanner, and cause a fire or  
electric shock. Should such objects ever fall inside  
the scanner, immediately turn the power OFF, and  
disconnect the power plug from the power outlet.  
Then, contact your local authorized Canon dealer  
or service representative to have the unit serviced.  
Do not wear loose clothing or jewelry that may get  
caught in the scanner while you are using it. This  
may result in personal injury. Be extra careful of  
neckties and long hair. If anything becomes caught  
in the scanner, immediately disconnect the power  
cord to stop the scanner.  
Be careful when placing paper in the scanner and  
when removing jammed paper. It is possible to cut  
your hand on the edge of a sheet of paper.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
About the Fingerprint Sensor  
Disposal  
(ScanFront 220P only)  
The following actions may damage the sensor or  
cause it to malfunction:  
Prior to disposing of the scanner, initialize the  
scanner to ensure that the registered data is  
deleted.  
– Dropping an object on the fingerprint sensor, or  
otherwise subjecting it to a strong impact  
– Scratching the surface of the fingerprint sensor,  
or poking it with a pointed object  
When disposing of the scanner, make sure to  
follow all local ordinances and laws or consult with  
the retailer who sold you the scanner.  
– Pressing a hard object such as a fingernail or  
metal item against the fingerprint sensor,  
resulting in scratches being created on the  
surface of the fingerprint sensor  
– Touching the fingerprint sensor with dirty hands,  
which might scratch or dirty the surface of the  
fingerprint sensor  
– Placing a sticker on the surface of the fingerprint  
sensor, or covering the surface with ink or  
another substance  
If fingerprint authentication fails frequently, the  
fingerprint sensor may be dirty. Clean the surface  
of the fingerprint sensor regulary.  
When cleaning the fingerprint sensor, use a soft  
dry cloth to wipe dirt off the surface.  
Do not use a pointed object to remove any dirt that  
accumulates around the fingerprint sensor. Doing  
so may cause the fingerprint sensor to  
malfunction.  
Touching the fingerprint sensor while charged with  
static electricity may cause the fingerprint sensor  
or scanner unit to malfunction. Before touching the  
fingerprint sensor, discharge any static electricity  
by touching a piece of metal. Be especially careful  
during dry periods, such as the winter season,  
when the likelihood of being charged with static  
electricity is high.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
ScanFront Setup Overview  
Follow the procedures below to set up the ScanFront 220/220P.  
• Configuring the Date and Time and Confirming the  
Time Zone  
Confirm that all of the supplied accessories are included.  
Set the date and time and confirm the time zone by  
logging in to the Web Menu. (See p. 18.)  
Remove the packing materials protecting the scanner, and  
attach the supplied feed roller. (See p. 9.)  
This section gives an overview of the procedure for  
scanning a document, using the example of scanning from  
the Home screen. For more details on this procedure, refer  
to the Operation Guide and ScanFront 220/220P  
INSTRUCTIONS (electronic manual).  
Move the scanner to the desired installation site, and  
connect the AC adaptor and network cable.  
Use the power switch to turn the scanner ON, and press  
[Power off] on the touch panel to turn it OFF.  
To set up the scanner, configure the administrator settings  
on the scanner and the Web Menu settings from your  
computer’s Web browser. This guide describes how to  
configure the network settings from the scanner, how to set  
the date and time and confirm the time zone from the Web  
Menu, and how to configure mail server settings for  
sending e-mail.  
For details on other settings, refer to the Operation Guide  
and ScanFront 220/220P INSTRUCTIONS (electronic  
manual).  
* For a Web browser, use Microsoft Internet Explorer 6.0 or  
later.  
• Network Settings  
From the [Administrator setting] screen on the scanner,  
configure the [Device Name] and [IP Address] settings  
needed to connect to the network. (See p. 16.)  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
1. Checking the Supplied Accessories  
After unpacking the scanner, confirm that the following accessories are included. In the unlikely event that any of these accessories  
are missing or damaged, contact your local authorized Canon dealer.  
ScanFront 220  
Power Cord*  
(standard model)  
(Cord length: 1 m)  
ScanFront 220P  
(model with fingerprint sensor)  
Setup Guide (this manual)  
Operation Guide  
Feed Roller  
English language only. PDF files of the  
Operation Guide in other languages can be  
found on the INSTRUCTIONS CD-ROM.  
The feed roller must be attached to the  
scanner during installation. (See p. 9.)  
INSTRUCTIONS CD-ROM**  
The following manuals are stored as PDF  
files on this CD-ROM:  
INSTURCTIONS  
AC Adapter*  
(Cord length: 1.5 m)  
Setup Guide  
Operation Guide  
*
Make sure to use only the supplied AC adapter and power cord.  
** The PDF files stored on the CD-ROM require Adobe Acrobat or Adobe Reader to open. (You can download Adobe Reader from the Adobe Web site.)  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2. Removing the Packing Materials and Attaching the Feed Roller  
Remove all of the packing materials protecting the scanner, and attach the feed roller.  
1. Remove the orange tape (3 pieces) securing the  
CAUTION  
outer case.  
The open/close movement of the panel unit is linked to the up/  
down movement of the document eject tray. Do not press on the  
document eject tray when you open the panel unit.  
2. Gently open the document eject tray.  
4. Remove the orange tape (2 pieces) securing the  
roller covers.  
3. Pull the lock lever toward you and then fully open the  
panel unit.  
Lock lever  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
5. Open the roller cover for the feed roller.  
8. Move the lock lever in the direction of the arrow, then  
insert it into the hole in the feed roller.  
6. Lift up the roller lock lever a, and slide it in the  
direction of the arrow b.  
9. Lower the roller lock lever to lock the feed roller into  
position.  
7. Align the notch in the shaft of the roller with the shaft  
10. Close the roller cover. Make sure you hear a click,  
which indicates the cover has returned to its original  
position.  
of the scanner, and place the feed roller into position.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11. Gently close the panel unit. Press on both sides of  
the unit until you hear a click, which indicates the unit  
is locked.  
12. Gently close the document eject tray.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Installing the Scanner and Connecting to a Network  
Before setting up the scanner, you need to move it to the installation site, and connect the AC adaptor and network cable.  
IMPORTANT  
For information on installation safety, see p. 3.  
Interfaces  
The interfaces are located on the right side of the scanner.  
a Power Connector: Connect the plug of the supplied AC adapter. (See p. 13.)  
b LAN Port: Connect a network cable designed for use with an RJ-45 modular jack. (See p. 13.)  
c PS/2 Connector (Green): Connect a PS/2 mouse.  
d PS/2 Connector (Purple): Connect a PS/2 keyboard.  
e USB Ports: Connect a USB memory device, USB keyboard, or USB mouse.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connecting the AC Adapter  
Follow the procedure shown below to connect the AC adapter.  
CAUTION  
Make sure to use only the AC adapter and power cord included with the scanner.  
a Connect the power cord and AC adapter.  
b Insert the plug of the AC adapter into the power connector.  
c Connect the power cord to the wall outlet.  
Connecting the Network Cable  
Insert the network cable connector (RJ-45) into the LAN port.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
4. Turning the Power ON and OFF  
Use the power switch to turn the scanner ON, and press the [Power off] button on the touch panel to turn it OFF.  
Turning the Power ON  
Turning the Power OFF  
Press the power switch to turn the scanner ON. The power  
indicator lights, and the Home screen or the login screen  
appears.  
Press the [Power off] button displayed at the bottom left of  
the panel to turn the scanner OFF.  
Power switch  
Home screen  
Power  
indicator  
IMPORTANT  
• When restarting the scanner, wait at least 5 seconds after  
turning the power OFF before turning it ON again.  
• If the scanner stops responding, press and hold the power  
switch to shut down the system, and then press the power  
switch to turn the scanner ON again. In such cases, settings  
configured immediately before shutting down may be lost.  
IMPORTANT  
• It takes approximately 40 seconds for the Home screen to  
appear after the power switch is turned on.  
• If users have been registered, the login screen appears.  
(Refer to “Login screen” on p. 6-4 of the ScanFront 220/220P  
INSTRUCTIONS.)  
• When the power indicator is lit but nothing appears on the  
touch panel, Display Off has activated to turn the panel display  
off. You can touch the panel to restore the display. (Refer to  
“Display Off” on p. 4-25 of the ScanFront 220/220P  
INSTRUCTIONS.)  
• When the power indicator is flashing but nothing appears on  
the touch panel, the Low Power mode has activated to  
temporarily stop scanner operations. You can press the power  
switch to switch out of Low Power mode. (Refer to “Low  
Power Mode” on p.4-26 of the ScanFront 220/220P  
INSTRUCTIONS.)  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
5. Configuring the Scanner Settings  
To set up the scanner, you must configure the [Network setting] items under [Administrator setting] on the scanner unit, and  
configure settings on the Web Menu (Administrator Mode).  
This section describes the network settings configured under [Administrator setting] on the scanner (see p. 16), and date/time  
configuration and time zone confirmation in the Web Menu (Administrator Mode) (see p. 18), and mail server settings for sending  
images via e-mail (see p. 20).  
For details on other settings, refer to the ScanFront 220/220P INSTRUCTIONS (electronic manual).  
The following items are only a few of the availavle settings. The necessary configuration differs, depending on the scale of the  
network environment in which you plan to use the scanner. To use the scanner with the minimum required settings, you must  
register addresses to the Shared Address Book in addition to configuring the [Network setting] items.  
Web Menu  
(Administrator Mode)  
Setting Item  
Network setting  
Description  
Administrator setting  
Set the Device Name and IP Address.  
Yes  
Yes  
No  
Set the password required to login to  
[Administrator setting] and the Web Menu.  
Administrator password  
Yes  
Login type  
Select the screen that appears when users log in.  
Register the users who will use the ScanFront.  
Yes  
No  
Yes  
Yes  
Register user  
Register Shared Address  
Book  
Register entries in the Shared Address Book  
available to all users.  
No  
No  
No  
No  
No  
No  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Register the Shared Job Button available to all  
users.  
Register Shared Job Button  
Device Configuration  
Set the basic operations of the ScanFront  
(including network settings).  
Register the SMTP server to be used for sending e-  
mail.  
E-mail server settings  
Register a domain server that can search users with  
Active Directory.  
Authentication server settings  
Address book server settings  
Register an LDAP server that can search e-mail  
address books.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
2. Press [OK] to display the [Administrator setting]  
screen.  
Network Settings  
Follow the procedure below to confirm and configure the  
device name and IP address needed to connect the scanner to  
a network.  
No administrator password is set by default.  
IMPORTANT  
• The device name is the name used to identify the scanner on  
the network and is set to the 14 alphanumeric characters of  
the SF+MAC address by default. When changing this setting,  
make sure to select a unique name that is different from those  
of all other devices.  
• Under default settings, the IP address is assigned  
automatically by the DHCP server. When a DHCP server is  
not used, clear the [DHCP server Enable] check box, and  
enter a fixed address. For details, contact your network  
administrator.  
• The device name or IP address is used as the URL when  
accessing the Web Menu. Be sure to write down both the  
device name and IP address in case you forget them.  
3. Press [Network setting].  
1. Press [Administrator setting].  
The [Administrator Password] input box appears.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4. Confirm the [Device name] and [IP address].  
Press [Shift] to switch, the entry screen to capital letters.  
6. Enter the new device name (or IP address), and  
press [OK].  
IMPORTANT  
• The device name is the name used to identify the scanner on  
the network. When changing this setting, make sure to select  
a unique name that is different from those of all other devices.  
• The device name can be a combination of letters (A-Z, a-z),  
numbers (0-9), and hyphens (-) up to 15 characters long.  
• The device name must begin with a letter. You cannot end the  
device name with a hyphen.  
7. Confirm the new device name and IP address, and  
press [OK].  
5. Press [Device name] (or [IP address]).  
A keyboard entry screen appears.  
8. Press [Close] to return to the Home screen.  
9. Press [Power off] to restart the scanner.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Configuring the Date and Time and  
Hint  
Confirming the Time Zone  
When you finish configuring the network settings, log in to  
the Web Menu to set the date and time and confirm the time  
zone.  
If the Web Menu does not appear in the desired language,  
select the desired language in the [Language] box to switch the  
Web Menu display.  
For details on other settings, refer to the Operation Guide and  
ScanFront 220/220P INSTRUCTIONS (electronic manual).  
IMPORTANT  
Make sure that the time zone is set to your region of use. If the  
time zone is set to the wrong region, the recorded sending times  
and time stamps for image files will not match the time setting  
displayed on the scanner.  
5. Click [Login] to log in to the Web Menu (Administrator  
Mode).  
1. Turn the scanner ON.  
Hint  
2. Log in to [Administrator setting], open the network  
settings, and confirm the IP address. (See “Network  
No administrator password is set by default. If you set a  
password under the administrator settings, enter the password  
to log in. (See p. 15.)  
3. Launch the Web browser on the computer.  
4. Enter the device name or the IP address as the URL  
to open the Web Menu.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
6. Click [Device Configuration].  
Hint  
To change the setting, click [Language/Timezone] or [Setting].  
Language/Timezone Setting Screen  
The [Device Configuration] screen appears.  
7. Check the [Language/Timezone] setting.  
IMPORTANT  
• If the correct time zone is not set, the time stamps that are  
saved for the send time of e-mail messages, and for the saved  
image files will be incorrect.  
• When the daylight saving time mode is enabled, the correct  
time may not be reflected. In this case, set the correct time.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Mail Server Settings  
To send scanned images via e-mail, open the Server  
Settings screen from the Web Menu and register a mail  
server. For details, refer to “Server Settings” on p. 4-27 of  
the ScanFront 220/220P INSTRUCTIONS (electronic  
manual).  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
6. Scanning Procedure  
This section gives an overview of the procedure for sending scanned images from the Home screen.  
For more details, refer to the Operation Guide or the ScanFront 220/220P INSTRUCTIONS (electronic manual).  
1. Place a document in the scanner.  
Hint  
2. Select a transfer destination by pressing a  
• You can change the transfer destination by changing the  
[Address type].  
• The following icons are used to indicate the types of address.  
destination button.  
:E-mail  
:FTP  
:Shared folder  
:Group  
• Pressing an address adds a checkmark (  
) to the icon and  
selects the address. Pressing a selected address again clears  
the selection.  
• Each time you press an e-mail or group icon, the send  
condition changes (To, Cc, Bcc).  
:To  
:Cc  
:Bcc  
:Selection cleared  
IMPORTANT  
If an address has a shaded background but no check mark, it is  
not selected.  
4. If there are no addresses registered in the address  
The [Address selection] screen appears.  
book, press [Edit] to register addresses.  
Hint  
You can change the transfer destination from the [Address  
selection] screen.  
3. Press one of the displayed addresses to select it.  
Hint  
If the address you want to register is for your private use,  
register it in My Address Book. For details, refer to “Registering  
and Editing Addresses” on p. 3-19 of the Operation Guide.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
5. Confirm that the selected address has a check mark,  
and press [Next].  
• Press [Abort] to cancel the scanned images and return to  
the Scan/Delivery Options screen.  
The [Scan / Delivery Options] screen appears.  
• Press the [Continue] button to resume scanning.  
• Press [Complete] to go to the Send screen.  
6. Confirm the scan settings, and press [Start].  
7. Press [Continue].  
8. Check the scanned image.  
Scanning starts, and stops when the document has been  
scanned.  
: Display the image of the next page.  
: Display the image of the previous page.  
: Move the viewing area around an image  
when an enlarged view of the image is shown.  
: Rotate the image 90 degrees counterclockwise.  
: Rotate the image 90 degrees clockwise.  
: Enlarge the image.  
: Reduce the image.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9. Press [Send].  
An address confirmation message appears.  
10.Confirm the address and press [OK] to send the  
scanned image.  
The scanner sends the image file and returns to the Home  
screen.  
Hint  
The screen that appears after images are sent can be selected  
in the settings. For details, refer to the Operation Guide.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CANON ELECTRONICS INC.  
1248, SHIMOKAGEMORI, CHICHIBU-SHI, SAITAMA 369-1892, JAPAN  
CANON U.S.A. INC.  
ONE CANON PLAZA, LAKE SUCCESS, N.Y. 11042, U.S.A.  
CANON CANADA INC.  
6390 DIXIE ROAD, MISSISSAUGA, ONTARIO L5T 1P7, CANADA  
CANON EUROPA N.V.  
BOVENKERKERWEG 59-61, P.O.BOX 2262, 1180 EG AMSTELVEEN, THE NETHERLANDS  
CANON LATIN AMERICA, INC.  
703 WATERFORD WAY, SUITE 400 MIAMI, FLORIDA 33126, U.S.A.  
CANON AUSTRALIA PTY. LTD.  
1 THOMAS HOLT DRIVE, NORTH RYDE, SYDNEY. N.S.W, 2113. AUSTRALIA  
CANON SINGAPORE PTE. LTD.  
1 HARBOUR FRONT AVENUE #04-01, KEPPEL BAY TOWER, SINGAPORE 098632  
CANON HONGKONG COMPANY LTD.  
19TH FLOOR, THE METROPOLIS TOWER, 10 METROPOLIS DRIVE, HUNGHOM, KOWLOON, HONG KONG.  
CANON KOREA BUSINESS SOLUTIONS INC.  
168-12 SAMSEONG-DONG, GANGNAM-GU, SEOUL, KOREA  
* C E - I E - 5 7 3 - 0 3 *  
PUB. CE-IE-573-03  
© CANON ELECTRONICS INC. 2007  
PRINTED IN JAPAN  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Belkin Headphones F8V9017 User Manual
Bonavita Hot Beverage Maker BV3825ST User Manual
Bosch Power Tools Power Hammer 11317EVS User Manual
Breville Blender BSB400XL User Manual
Briggs Stratton Automobile Parts 110700 User Manual
Campbell Hausfeld Nail Gun IN729000AV User Manual
Canon Camcorder 6340B002 User Manual
Carrier Heat Pump 50WQ User Manual
Casio Watch MA0904 EA User Manual
Chicago Electric Washer 98332 User Manual