™
Easy Vac
Compact
U S E R ’ S G U I D E
5 9 G 4 S E R I E S
3
4
5
Safety Instructions
Product View
Assembly
6-8
Operations
9-12
Maintenance and Care
13
14
15
16
Troubleshooting
Consumer Services
Replacement Parts
Warranty
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic
precautions should be observed, including
the following:
■ Do not pick up toxic material (chlorine bleach,
ammonia, drain cleaner, etc.).
■ Do not use in an enclosed space filled with vapors
given off by oil base paint, paint thinner, some moth
proofing substances, flammable dust, or other
explosive or toxic vapors.
REaD all InStRUctIonS
bEfoRE USInG yoUR
canIStER VacUUM.
■ Do not use for any purpose other than described in
this User’s Guide.
Always connect to a polarized outlet (left slot is wider
than right). Unplug from outlet when not in use and
before conducting maintenance.
■ Always turn off this appliance before connecting or
disconnecting vacuum hose.
■ Use only manufacturer’s recommended attachments.
■ Use only on dry, indoor surfaces.
■ Keep openings free of dust, lint, hair, etc.
■ Keep appliance on a level surface.
WaRnInG:to reduce
the risk of fire, electric shock,
■ Turn off all controls before plugging or
or injury:
unplugging cleaner.
■ Do not leave cleaner when it is plugged in.
■ Be extra careful when cleaning stairs.
■ Unplug from outlet when not in use and before
servicing.
■ Close attention is necessary when used by or
near children.
■ Do not use with damaged cord or plug.
■ To unplug grasp plug not cord.
SaVE tHESE
InStRUctIonS foR
fUtURE USE
■ Do not pull or carry by cord, use cord as a handle,
close door on cord, pull cord around sharp corners,
run cleaner over cord, or expose cord to heated
surfaces.
■ Hold plug when rewinding the cord onto the reel.
Do not allow the plug to whip when rewinding.
■ Do not use cleaner if it has been dropped, damaged,
left outdoors or dropped into water. Have it repaired
at an Authorized Service Center.
tHIS aPPlIancE
HaS a PolaRIZED
PlUG.
■ Do not allow children to use as a toy.
■ Do not use outdoors or on wet surfaces.
■ Do not handle cleaner or plug with wet hands.
To reduce the risk of electric shock, this appliance has a
polarized plug (one blade is wider than the other). This plug
will fit in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install a proper outlet.
Do not change the plug in any way.
■ Do not put any object into openings, use with
blocked opening, or restrict air flow.
■ Do not use without filters in place.
■ Do not allow hair, loose clothing, fingers or
body parts to get near openings or floor brush in
the appliance.
This model is for household use only.
■ Do not pick up hot coals, cigarette butts, matches
or any hot, smoking, or burning objects.
■ Do not pick up hard or sharp objects such as glass,
nails, screws, coins, etc.
■ Do not pick up flammable or combustible materials
(lighter fluid, gasoline, kerosene, etc.) or use in the
presence of explosive liquids or vapor.
■ Do not unplug by pulling on cord.
3
w w w . b i s s e l l . c a
1 - 8 0 0 - 2 6 3 - 2 5 3 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Handle
Product view
Air Flow Regulator
Extension Wands
Dirt Cup
Release Button
Carry Handle
Hose Connector
Dirt Cup
Filter
Hose
Emptying
Button
Easy Empty™
Dirt Cup
Brush Switch
Multi-Surface
Floor Nozzle
caUtIon:
Do not plug in your
vacuum until you
are familiar with all
instructions and
Combination Crevice
Tool/Dusting Brush
operating procedures.
w w w . b i s s e l l . c a
1 - 8 0 0 - 2 6 3 - 2 5 3 5
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
1. Connect hose to vacuum by inserting hose
connector on the end of the hose into the
suction inlet. Make sure the hose is
WaRnInG:
Plastic film can be dangerous.
to avoid danger of suffocation,
keep away from babies and
children.
positioned so the tabs on the hose connector
line up with the notches on the suction inlet.
Once inserted into the suction inlet, turn
counter clockwise to lock into place.
2. Attach extension wands section together
by inserting into one another and twisting
slightly to tighten.
2.
1.
Suction Inlet
3. Connect hose handle to the end of the
extention wand and twist slightly to tighten.
4. Connect floor nozzle to the end of the
extension wand and twist slightly to tighten.
5. Once assembled, you can store your
vacuum by inserting the storage clip (located
on the back of the floor nozzle) into the
storage slot on the rear of the vacuum.
3.
5.
4.
5
w w w . b i s s e l l . c a
1 - 8 0 0 - 2 6 3 - 2 5 3 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Power cord
the power cord is located at the rear of the
vacuum. Gently pull out the power cord,
watching for the yellow line. Stop pulling the
power cord once the yellow line is visible.
there is also a red line, which indicates the
end of the usable cord. Do not pull the power
cord out beyond the red line.
Automatic
Cord Rewind
Button
Automatic cord rewind
your vacuum is equipped with an automatic
cord rewind. When cleaning is finished, press
the power button off and grasp the plug to
disconnect from the electrical outlet. Hold the
plug and press the automatic cord rewind
button to rewind the cord automatically.
Power button
turn the power on or off by pressing lightly
downward on the power button ( ).
caUtIon:
be careful to avoid
injury as cord retracts
very quickly.
Power Button
caUtIon:
before using your vacuum,
make sure that the dirt cup
and all filters are in place.
Do not operate your vacuum
without the dirt cup and
filters.
w w w . b i s s e l l . c a
1 - 8 0 0 - 2 6 3 - 2 5 3 5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Special tools
your bISSEll Easy Vac compact is not only a
powerful carpet and rug vacuum cleaner, it’s
also a versatile bare floor and above floor
vacuum cleaner when you select one of the
special tools.
Tip:
Before cleaning under
low furniture, check
area first for objects
that might harm the
unit or block the hose.
floor nozzle:
Use to vacuum carpets, rugs and bare floors.
Swivel head turns to get into tight spaces
and fits under cabinets.
Brush Up
1.
1. To vacuum carpets and rugs, push the brush
switch to the carpet position
. This
will pull the brushes up into the floor nozzle.
2. To vacuum bare floors, push the brush
switch to the bare floor position
will extend the brushes down from the floor
nozzle.
. This
Brush Down
2.
combination crevice tool/dusting brush:
Use the crevice tool in tight, narrow spaces.
Use the dusting brush to clean curtains,
draperies, cushions and fabrics.
Tip:
Hair, string and small objects
can block the hose and tools.
Check them occasionally for
obstructions.
7
w w w . b i s s e l l . c a
1 - 8 0 0 - 2 6 3 - 2 5 3 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Air flow regulator
open the air flow regulator by sliding the
regulator down towards the extension wand to
an open position. this will reduce the suction
power for vacuuming delicate fabrics.
for full suction power, close the air flow regulator
by sliding the regulator up to the closed position.
Tip:
Use the air flow regulator to
reduce air flow as needed
when using the tools.
w w w . b i s s e l l . c a
1 - 8 0 0 - 2 6 3 - 2 5 3 5
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and care
Emptying the dirt cup
2.
Empty the dirt cup as soon as the dirt reaches
the “fUll” lines on the sides of the dirt cup.
1. Unplug the vacuum from the electrical outlet.
2. Remove the hose by turning the hose
connector counter clockwise and pulling it
out from the suction inlet. Set hose aside.
3.
Dirt Cup
Release
Button
3. Press the dirt cup release button on the
carry handle and lift up to remove the dirt
cup.
4. Choose an emptying method. Method #2 is
recommended for allergy suffers.
Method #1 – Hold the dirt cup over a trash
can and push the emptying button to open
the bottom. Close the bottom after the dirt
empties.
4.
Method #2 – Place a plastic bag over the
bottom of the dirt cup. Push the emptying
button through the plastic to open the
bottom. After the dust settles, close the
bottom and remove the bag to discard.
Emptying
Button
5. Replace the dirt cup by placing it back into the
vacuum and pushing down on the carry handle
until it snaps back into place.
WaRnInG:
to reduce the risk of
electric shock, turn
power switch off and
disconnect plug from
electrical outlet before
performing maintenance
or troubleshooting
checks.
9
w w w . b i s s e l l . c a
1 - 8 0 0 - 2 6 3 - 2 5 3 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and care
Cleaning the dirt cup filters
Use only bISSEll replacement filters in your
Easy Vac compact.
1. Unplug the vacuum from the electrical outlet.
2.
2. The dirt cup filters can be reached by
removing the dirt cup from the vacuum,
grasping the handle on the bottom of the
dirt cup filter assembly and turning counter
clockwise to unlock. Pull straight down to
remove.
3. Remove the dirt cup filter screen by grasping
the bottom of the filter frame base and
pulling straight up.
4. Remove the dirt cup filter by grasping the
bottom of the filter frame base and turning
the dirt cup filter counter clockwise and
pulling straight up.
3.
5. The dirt cup filter screen and dirt cup filter
can be hand washed in cold water with a
mild detergent. Rinse well and air dry
thoroughly before placing back onto the filter
frame base.
6. Attach the dirt cup filter back onto the filter
frame base by lining up the tabs on the
filter base with the notches on the dirt cup
filter and turning clockwise to lock back into
place.
7. Attach the dirt cup filter screen back on to
the dirt cup filter by sliding it down over the
dirt cup filter, making sure that the tabs on
the bottom of the dirt cup filter screen line
up with the notches on the dirt cup filter.
4.
8. Insert the dirt cup filter assembly back into
the dirt cup by lining up the tabs on the
top of the dirt cup filter assembly with the
notches inside the top of the dirt cup and
turning the handle on the bottom of the dirt
cup filter assembly clockwise to lock into
place.
w w w . b i s s e l l . c a
1 - 8 0 0 - 2 6 3 - 2 5 3 5
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and care
Cleaning the pre-motor filter
notIcE:
the pre-motor filter protects the motor from
dirt and dust particles. Use only bISSEll
replacement filters in your Easy Vac
compact.
1. Remove the dirt cup from the vacuum,
following steps 1-3 of Emptying the dirt cup
on page 9.
this product is intended for household
use only and not for commercial or
industrial use. Vacuuming of dust
from products like plaster, concrete or
ashes will damage the motor and void
the warranty.
2. The pre-motor filter is located between the
power button and the automatic cord rewind
button.
3.
3. The pre-motor filter can be hand washed in
cold water with a mild detergent. Rinse well
and air dry thoroughly before placing back
into the vacuum.
Washable Pre-
Motor Filter
Tip:
For maximum cleaning performance,
check the filters often and clean or
replace if necessary.
WaRnInG:
Do not operate cleaner
with damp or wet
filters or without all
filters in place.
11
w w w . b i s s e l l . c a
1 - 8 0 0 - 2 6 3 - 2 5 3 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and care
2.
Replacing the post-motor filter
the post-motor filter assists in the filtration
process to return cleaner air to the room.
Use only bISSEll replacement filters in your
Easy Vac compact.
1. Unplug the vacuum from electrical outlet.
2. Remove the filter door (located on the back
of the vacuum) by pushing down on the tab
and pulling out and away from the vacuum.
3. The post-motor filter can be hand washed in
cold water with a mild detergent. Rinse well
and air dry thoroughly before placing back
into the vacuum.
4. Replace the filter door by placing the tabs
on the bottom of the filter door into the
notches on the bottom of the post-motor
filter compartment and pushing the tab
forward back into the vacuum to lock into
place.
Clearing clogs from the dirt cup
1. Unplug the vacuum from electrical outlet.
2. Remove the dirt cup from the vacuum,
following steps 1-3 of Emptying the dirt cup
on page 9.
3. Remove the dirt cup filter assembly from the
dirt cup, following step 2 of Clean the dirt
cup filter on page 10.
4. Tap the dirt cup filter assembly over a
garbage container to remove any dirt or
debris from the dirt cup filter screen that
surrounds the dirt cup filter.
5. Reach up into the dirt cup to clear any dirt or
debris from the dirt cup.
6. Check to see if there are any clogs in the
suction inlet.
7 . After clearing any dirt or debris from the dirt
cup, replace the dirt cup filter assembly back
in the dirt cup following step 8 of Cleaning
the dirt cup filter on page 10.
w w w . b i s s e l l . c a
1 - 8 0 0 - 2 6 3 - 2 5 3 5
12
Download from Www.Somanuals.com. All Manuals Search And Download.
WaRnInG:
Troubleshooting
to reduce the risk of electric shock,
turn power off and disconnect
plug from electrical outlet before
performing maintenance or
troubleshooting.
Vacuum cleaner won’t run
Possible causes
Remedies
1. Vacuum cleaner is not plugged in
2. Power button is not pressed down
1. Check electrical plug
2. Press power button down
Vacuum cleaner won’t pick up or low suction
Possible causes
Remedies
1. Tools, hose and/or extension wands are blocked
2. Filters are dirty
1. Remove each part and check for blockages
2. Check and clean or replace all filters
3. Empty dirt cup
3. Dirt cup is full
4. Hose connector not securely attached to suction inlet
4. Make sure hose connector is locked into
suction inlet
5. Crack or hole in hose
5. Check hose and replace if needed
6. Air flow regulator is set to open or
6. Change to closed or maximum setting
minimum setting
7. Clog in the dirt cup
7. Clear clog from dirt cup following
instructions on page 12
Visible dust escaping from vacuum
Possible causes
Remedies
1. Dirt cup is full
1. Empty dirt cup
2. Filters missing or installed incorrectly
3. Filters are dirty
2. Check all filters for correct installation
3. Check and clean or replace all filters
4. Hose is blocked
4. Remove hose and check for
blockages
5. Hose connector not securely attached to suction inlet
6. Crack or hole in hose
5. Make sure hose connector is locked into
suction inlet
6. Check hose and replace if needed
other maintenance or service not included in the manual should be performed by an
authorized service representative.
thank you for selecting a bISSEll product.
Please do not return this product to the store.
13
w w w . b i s s e l l . c a
1 - 8 0 0 - 2 6 3 - 2 5 3 5
Download from Www.Somanuals.com. All Manuals Search And Download.
BISSELL Consumer Services
If your bISSEll product should require service:
For information about repairs or replacement parts, or questions about your warranty, call:
bISSEll consumer Services
1-800-263-2535
Monday - Friday
Saturday
Or write:
8 a.m. — 10 p.m. ET
9 a.m. — 8 p.m. ET
BISSELL HOMECARE, INC.
PO Box 3606
Grand Rapids MI
49501 U.S.A.
ATTN: Consumer Services
Or visit the BISSELL website - www.bissell.ca or www.2Xbissell.ca
When contacting BISSELL, have model number of cleaner available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
notE: Please keep your original sales receipt. It provides proof of date of purchase in the event of a
warranty claim. See Warranty on page 16 for details.
Please do not return this product to the store.
w w w . b i s s e l l . c a
1 - 8 0 0 - 2 6 3 - 2 5 3 5
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacement parts - BISSELL Easy Vac Compact
Item
1
Part no.
203-1531
Part name
Dirt Cup Filter Screen
2
3
4
5
6
7
8
9
203-1532
203-1533
203-1534
203-1535
203-1536
203-1537
203-1538
203-1539
Dirt Cup Filter
Dirt Cup Filter Frame Base
Pre-Motor Filter
Post-Motor Filter
Floor Nozzle
Hose with Handle
Extension Wands (2)
Combination Crevice Tool/Dusting Brush
1
5
2
3
4
6
7
8
9
15
w w w . b i s s e l l . c a
1 - 8 0 0 - 2 6 3 - 2 5 3 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty - BISSELL Easy Vac Compact
If you need additional instruction regarding this warranty or have questions regarding what it may cover, please
contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below.
limited one year Warranty
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product, BISSELL Canada
Corporation will repair or replace (with new or remanufactured components or products), at BISSELL’s option, free
of charge from the date of purchase by the original purchaser, for one year any defective or malfunctioning part.
See information below on “If your BISSELL product should require service”.
This warranty applies to product used for personal, and not commercial or rental service. This warranty does not
apply to routine maintenance components such as belts or brushes. Damage or malfunction caused by negligence,
abuse, or use not in accordance with the User’s Guide is not covered.
If your bISSEll product should require service
Call BISSELL Consumer Services at the number listed below or visit the BISSELL website – www.bissell.ca to
locate a BISSELL Authorized Service Centre in your area. If there are no authorized BISSELL Service Centres in
you a Return Authorization Number and a pre-paid mailing label to return the unit to BISSELL for warranty repair.
The machine should be returned with a photocopy of your proof of purchase. (Your dated sales receipt is your
warranty – do not send original.) If you need information about repairs or replacement parts, or if you have questions
about your warranty, contact BISSELL Consumer Services.
Website:
E-mail:
or call:
BISSELL Consumer Services
1-800-263-2535
Monday – Friday 8 a.m. – 10 p.m. ET
Saturday
9 a.m. – 8 p.m. ET
or write:
BISSELL Homecare, Inc.
PO Box 3606
Grand Rapids MI
49501 U.S.A.
ATTN: Consumer Services
bISSEll canaDa coRPoRatIon IS not lIablE foR IncIDEntal oR conSEQUEntIal DaMaGES of any
natURE aSSocIatED WItH tHE USE of tHIS PRoDUct. bISSEll’S lIabIlIty WIll not EXcEED tHE
PURcHaSE PRIcE of tHE PRoDUct.
*EXcEPtIonS anD EXclUSIonS fRoM tHE tERMS of tHE lIMItED WaRRanty
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER
ORAL OR WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION
OF LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE ONE YEAR DURATION
FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE.
notE: Please keep your original sales receipt,
it is your warranty.
©2010 BISSELL Homecare, Inc
BISSELL Canada Corporation
Niagara Falls, ON L2E 6W2
All rights reserved. Printed in China
Part Number 110-4210
Rev 2/10
Visit our website at:
w w w . b i s s e l l . c a
1 - 8 0 0 - 2 6 3 - 2 5 3 5
16
Download from Www.Somanuals.com. All Manuals Search And Download.
|