Bissell Vacuum Cleaner 1690 User Manual

User’s Guide  
Models 1690 and 1695  
Assembly  
Operation  
Safety  
Storage  
TM  
Thanks for buying a BISSELL POWERSTEAMER Upright Deep Cleaner.  
We’re glad you purchased a BISS
Upright Deep Cleaner. Everything we k
went into the design and construction
high-tech home cleaning system.  
Your POWERSTEAMER is well
with a full one-year warranty. We also
knowledgeable, dedicated Consumer S
so, should you ever have a problem, y
fast, considerate assistance.  
My great-grandfather invented
in 1876. Today, BISSELL is a global lea
manufacture, and service of high  
quality homecare products like  
your POWERSTEAMER.  
Thanks again, from  
all of us at BISSELL.  
Mark J. Bissell  
President and Chief Executive Officer  
cleaning power  
TM  
SmartMix automatically adjusts  
formula to specific cleaning need  
Floating brush suspension adjusts  
to all floor surfaces  
On-board tools for above  
floor cleaning  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.  
Handle  
Assembly  
Bolt and Nut  
(2)  
4.  
Upper Hose  
Rack  
Upholstery/  
Carpet Tool  
Lower  
Chassis  
3.  
Flex Hose  
Assembly  
Upper  
Cord  
Holder  
5.  
Spraying  
Crevice  
Tool  
Power  
Cord  
2.  
Lower  
Cord  
Holder  
Lower  
Hose  
Rack  
Back View  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to use this guide  
This User’s Guide has been designed to help you get  
Pay particular attention to the assembly diagram,  
TM  
maximum satisfaction from your POWERSTEAMER  
assembly instructions, and part names. Locate and  
organize all parts before assembly. Familiarize  
yourself with the parts and where they go.  
Following the Guide will greatly enhance your  
ability to get top performance from your cleaner  
for many years.  
Upright Deep Cleaner. You’ll find assembly  
instructions for all cleaning tasks, safety  
precautions, pre-cleaning tips, and maintenance  
and troubleshooting instructions. Please read this  
Guide thoroughly before assembling your cleaner.  
How to put it together  
The only thing you will need to assemble your cleaner  
is a Phillips head screwdriver.  
TM  
Your POWERSTEAMER is packaged as two  
primary components–the Lower Chassis and the  
Handle Assembly. Also included is a 10’ Flex Hose  
Assembly and Upholstery/Carpet Tool. Additional  
attachments are included on some models.  
Handle Assembly. Slide Handle Assembly (with  
attached Hose Rack/Cord Holder) down onto Lower  
Chassis until it will go no further. Secure by placing  
1.  
2.  
two (2) Phillips Head  
bolts into front of Handle  
Assembly and into hex nuts at back of Lower Chassis  
unit, as shown.  
Power Cord. Wrap Power Cord around upper and  
lower Cord Holders, and secure Plug to Cord with  
molded clip.  
TM  
NOTE: Your POWERSTEAMER features a Cord  
Quick-Release. To easily release Power Cord, rotate  
upper Cord Holder and remove Cord. Use clip at  
back of Handle Assembly to secure Power Cord  
when using cleaner.  
Flex Hose Assembly. Coil Flex Hose Assembly on  
3.  
4.  
TM  
back of POWERSTEAMER, using the hose racks  
to guide and secure the Hose.  
Upholstery/Carpet Tool. Connect Upholstery/  
Carpet Tool to end of Flex Hose Assembly by  
depressing the button at the end of the Hose.  
Slide the Tool over the Hose end until the button  
snaps into place in hole in Tool. Secure Hose/Tool  
unit in clamp at upper right side.  
Spraying Crevice Tool. Clip Spraying Crevice  
Tool to Flex Hose Assembly just below the  
Upholstery/Carpet Tool using the Spraying  
Crevice Tool Hose Clip.  
5.  
4
Assembly is now complete.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
Safety instructions . . . . . . . . . .2  
Product view . . . . . . . . . . . . . .3  
How to put it together . . . . . . .4  
How to begin . . . . . . . . . . . . . .5  
Index . . . . . . . . . . . . . . . . . . . .5  
Deep cleaning carpet . . . . . .6-7  
How to begin...  
Deep cleaning carpet  
1. Plan activities to give carpet time to dry.  
2. Remove easily moved furniture (chairs, lamps, coffee/  
cocktail tables, etc.) from room.  
3. Vacuum carpet thoroughly.  
4. Decide where to begin–and end–your job. Clean in 3’x 4’  
sections, starting in areas farthest from exit. Plan to leave a  
path open to empty soiled water and refill cleaner.  
5. Carpeting will dry in three to four hours, depending on carpet  
style and air circulation in room. A floor fan speeds drying.  
6. Replace furniture on damp carpeting by placing waxed  
paper under furniture legs until floor dries completely.  
Cleaning upholstery  
& small areas . . . . . . . . . . . .8-9  
Cleaning bare floors . . . . .10-11  
Putting it away . . . . . . . . . . . .11  
Troubleshooting . . . . . . . . . . .12  
Parts . . . . . . . . . . . . . . . . . . .13  
Warranty . . . . . . . . . . . . . . . .14  
Consumer services . . . . . . . . .14  
Deep cleaning upholstery  
1. Check manufacturer’s tag before cleaning. “Wor “WS” on  
TM  
the tag means you can use your POWERSTEAMER. If tag is  
coded with an “Xor “S(with diagonal strike-through), or  
says “Dry Clean Only,” do not proceed. Do not use on velvet  
or silk.  
2. If manufacturer’s tag is missing or not coded, check with  
your furniture dealer.  
3. Check for colorfastness in an inconspicuous place.  
4. If possible, check upholstery stuffing. Colored stuffing may  
bleed through fabric when wet.  
Always vacuum thoroughly before  
you deep clean. If possible, move  
Tip:  
larger furniture to an area you  
will not be cleaning.  
Deep cleaning  
carpeting and  
upholstery  
regularly can  
reduce dust and  
allergens in  
your home.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to deep clean carpet  
Getting ready  
Pre-treating (optional)  
Pre-treat highly soiled carpet, such as hallways  
and other high-traffic areas.  
1. Unfasten the Clean Water Tank Latch Assembly by lifting  
from the bottom with your fingers.  
TM  
2. Remove Clean Water Tank Assembly by sliding it up the  
1. Move POWERSTEAMER to an area to be  
Handle Assembly until it comes free.  
cleaned.  
3. Take Clean Water Tank to sink area, remove Clean Water  
Tank Cap and fill Tank with hot (NOT boiling) tap water  
to fill line. Replace Cap securely.  
2. Move 3-position Power Switch to the  
PRE-TREAT ( I ) position to activate solution  
pump.  
3. Press Release Pedal on Left side of Lower  
Chassis with foot.  
4. Pull Trigger on Handle Assembly to spray  
cleaning solution as you move cleaner over  
soiled areas.  
5. Slowly move cleaner back and forth over car-  
pet surface one time while depressing Trigger.  
Do not overwet.  
TM  
4. Remove SmartMix Formula Tank Assembly from Clean  
Water Tank Assembly by grasping bottom with fingers and  
sliding it out.  
TM  
5. Unscrew SmartMix Formula Tank Cap and Insert  
TM  
Assembly and add BISSELL Fiber Cleansing Formula to fill  
line. Reclose Cap tightly.  
TM  
6. Slide SmartMix Formula Tank Assembly back into position  
in Clean Water Tank Assembly.  
7. Replace Clean Water Tank Assembly by sliding Tank down  
the front of the Handle Assembly until it fits snugly against  
top of Lower Chassis. Secure with Clean Water Tank  
Latch Assembly.  
6. Wait 5 - 10 minutes before full cleaning.  
TM  
8. Select SmartClean setting.  
WATER ONLY - Use for gentle cleaning of delicate  
fabrics, or for (optional) rinsing following cleaning.  
NORMAL - Water and Fiber Cleansing Formula are mixed  
to optimize normal cleaning. Use for everyday dirt and  
soil conditions.  
HIGH TRAFFIC - Water and Fiber Cleansing Formula are  
WARNING:  
Use  
mixed to optimize heavy cleaning. Use for entryways,  
hallways, heavy soil and stains. This setting may require  
only BISSELL Fiber  
Cleansing Formulain  
your POWERSTEAMER.  
TM  
more frequent refilling on the SmartMix bottle.  
Use of cleaning formulas  
which contain lemon  
or pine oil may damage  
this appliance and void  
warranty. Chemical spot  
cleaner s or solvent-  
based soil removers  
should not be used.  
These products may  
react with the plastic  
materials used in your  
POWERSTEAMER, causing  
cracking or pitting.  
9. Unwrap Power Cord from Cord Holder and plug into  
120 Volt, 60 Hz grounded outlet as described in Important  
Safety Instructions, page 2.  
If cleaner starts when first plugged in, switch cleaner OFF (O)  
until ready for use.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Deep cleaning  
1. Move Power Switch to CLEAN ( II ) position to activate  
solution pump and vacuum motor.  
Tip:  
2. Press Release Pedal on left side of Lower Chassis with foot.  
3. Slowly move cleaner back and forth over carpet surface  
one time while depressing Trigger. Do not overwet.  
4. Repeat motion over same area without depressing Trigger.  
5. Repeat Steps 3 and 4 until no more dirt can be removed.  
6. Continue to clean entire carpet, working in  
3’ x 4’ sections.  
Deep cleaning  
stairs and high  
traffic areas on a  
regular basis can  
prolong carpet  
life.  
7. Empty the Dirty Water Tank Assembly when dirty water  
reaches the full line.  
8. If the machine loses suction and/or motor noise rises in  
pitch, turn Power Switch to OFF. Check the Dirty Water  
Tank Assembly and empty the tank if it is full [see WHEN  
YOURE DONE, page 7].  
WARNING:  
The  
Dir ty Water Tank  
Assembly holds  
approximately one  
gallon of soiled liquid.  
A special float device  
in the tank will cause  
the cleaner to stop  
9. If floor nozzle stops spraying, turn Power Switch to OFF and  
check water and cleaning solution levels. Refill if needed.  
TM  
Never run POWERSTEAMER dry.  
removing solution from  
carpet, and the motor  
sound to rise in pitch  
when the Dirty Water  
Tank Assembly is full.  
Failure to empty full  
tank will damage unit.  
When you’re done  
1. Turn Power Switch to OFF (O) position.  
2. Unplug Power Cord from outlet.  
3. Remove and empty Clean Water Tank Assembly.  
4. Press Release Pedal and tip Handle Assembly back with  
Handle Assembly.  
5. Release Dirty Water Tank Latch Assembly at bottom of  
Lower Chassis.  
6. Carefully lift Dirty Water Tank Assembly from Lower  
Chassis using Carry Handle Assembly.  
7. Carry Tank to a toilet or sink, turn Circular Cap at back of  
unit counterclockwise to open, and pour to empty.  
8. Fill Dirty Water Tank Assembly with clean water. Rinse  
thoroughly and discard water.  
9. Remove Dirty Water Tank Triangle Lid and flush suction  
opening with clean water. Replace cover. Replace Circular  
Cap by turning clockwise.  
10. Replace Clean Water Tank Assembly on Handle Assembly  
and secure with side latches.  
11. Replace Dirty Water Tank Assembly on Lower Chassis and  
secure with Clean Water Tank Latch Assembly.  
12. See PUTTING IT AWAY on page 11.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to clean upholstery and small areas  
Getting ready  
1. Unfasten the Clean Water Tank Assembly by lifting from  
the bottom with your fingers.  
2. Remove Clean Water Tank Assembly by sliding it up the  
Handle Assembly until it comes free.  
3. Remove Flex Hose Assembly from back of unit.  
4. Tip Handle Assembly back by pressing Release Pedal  
on left side of Lower Chassis and pulling back on  
Handle Assembly.  
5. Lift Dirty Water Tank Triangle Lid by pulling back on rear  
latch with finger.  
6. Place triangle-shaped end of Flex Hose Assembly in Dirty  
Water Tank Triangle port by placing wide (bottom) end in  
first, then pushing latch end in until it snaps into place.  
7. Tip Handle Assembly back to its full upright position.  
8. Place Solution Tube Connector into the port at the lower  
left side of the Handle Assembly. Place tabs on Connector  
into notches in port, then turn clockwise to secure. Make  
lution Tube is securely fastened to Connector.  
olstery/Carpet Tool or Spraying Crevice Tool,  
to Flex Hose Assembly using the “button-in-  
hod.  
Tip:  
Check upholstery  
stuffing before  
cleaning.  
Colored stuffing  
may bleed  
through fabric  
when wet.  
n Water Tank to sink area, remove Clean Water  
and fill Tank with hot (NOT boiling) tap water  
Replace Cap securely.  
TM  
martMix Formula Tank Assembly from Clean  
k Assembly by grasping bottom with fingers and  
ut.  
TM  
martMix Formula Tank Cap and Insert  
TM  
and add BISSELL Fiber Cleansing Formula to  
eclose Cap tightly  
TM  
rtMix bottle back into position in Clean Water  
mbly.  
ean Water Tank Assembly. Slide Tank down front  
Assembly until it fits snugly against top of Lower  
ecure with Clean Water Tank Latch Assembly.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARNING:  
Do  
not lay unit on its  
back with Clean  
Water Tank Assembly  
in place. Do not tip  
up foot with Dirty  
Water Tank Assembly  
in place.  
TM  
15. Select SmartClean setting.  
WATER ONLY - Use for gentle cleaning of delicate  
fabrics, or for (optional) rinsing following cleaning.  
NORMAL - Water and Fiber Cleansing Formula are  
mixed to optimize normal cleaning. Use for everyday  
dirt and soil conditions.  
HIGH TRAFFIC - Water and Fiber Cleansing Formula are  
mixed to optimize heavy cleaning. Use for entryways,  
hallways, heavy soil and stains.  
WARNING:  
Use  
only BISSELL Fiber  
Cleansing Formulain  
This setting may require more frequent refilling on the  
your POWERSTEAMER.  
TM  
Use of cleaning formulas  
which contain lemon  
or pine oil may damage  
this appliance and void  
warranty. Chemical spot  
cleaners or solvent-  
based soil removers  
should not be used.  
These products may  
react with the plastic  
materials used in your  
SmartMix bottle.  
16. Unwrap Power Cord from Cord Holder and plug into  
120 Volt, 60 Hz grounded outlet as described in Important  
POWERSTEAMER, causing  
cracking or pitting.  
Cleaning  
Slowly move Upholstery/Carpet Tool back and  
forth over soiled surface, first using spray only,  
then spray and vacuum, finishing with  
vacuum only.  
NOTE: Use the Spraying Crevice Tool [optional  
on some models] to spray cleaning solution and  
remove soil from areas too small to be reached  
with the Upholstery/Carpet Tool.  
Continue to clean soiled area, working in  
small sections, until no more dirt can be  
removed. Do not overwet.  
If the machine loses suction and/or motor  
noise rises in pitch, turn Power Switch to OFF.  
Check the Dirty Water Tank Assembly and  
empty the tank if it is full [see WHEN YOURE  
DONE, page 7].  
4. If spray tip stops spraying, turn Power Switch  
to OFF and check water and cleaning solution  
levels. Refill if needed.  
TM  
Never run POWERSTEAMER dry.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to clean bare floors  
Getting ready  
TM  
NOTE: Your POWERSTEAMER is not recommended for  
cleaning wood floors.  
TM  
Use only BISSELLFloor Cleansing Formula on  
no-wax floors. Never use BISSELL Fiber Cleansing  
TM  
Formula or other carpet cleaners on bare floors.  
Sweep before starting.  
Remove old wax before cleaning.  
Leave an exit path.  
Allow at least 1/2 hour drying time.  
1. Remove Clean Water Tank Assembly and Dirty Water  
Tank Assembly.  
TM  
2. Tip POWERSTEAMER back for easier access to Nozzle.  
3. Attach Bare Floor Cleaning Tool to Nozzle with strip facing  
forward, as shown. Align front edges and snap together.  
4. Tip Handle Assembly back by pressing Release Pedal on left  
side of Lower Chassis and pulling back on Handle Assembly.  
5. Take Clean Water Tank to sink area, remove Clean Water  
Tank Cap and fill Tank with hot (NOT boiling) tap water  
to fill line. Replace Cap securely.  
3.  
Bare Floor  
Bottom Front Edge of  
Cleaning  
Lower Chassis  
Tool  
Snap Together  
TM  
6. Remove SmartMix Formula Tank Assembly from Clean  
Water Tank Assembly by grasping bottom with fingers and  
sliding it out.  
TM  
WARNING:  
Use  
7. Unscrew SmartMix Formula Tank Cap and Insert  
only BISSELL Fiber  
TM  
Assembly and add BISSELL Floor Cleansing Formula to  
Cleansing Formulain  
fill line. Reclose Cap tightly.  
your POWERSTEAMER.  
TM  
Use of cleaning formulas  
which contain lemon  
or pine oil may damage  
this appliance and void  
warranty. Chemical spot  
cleaners or solvent-  
based soil removers  
should not be used.  
These products may  
8. Slide SmartMix bottle back into position in Clean Water  
Tank Assembly.  
9. Replace Clean Water Tank Assembly. Slide Tank down front  
of Handle Assembly until it fits snugly against top of Lower  
Chassis. Secure with Clean Water Tank Latch Assembly.  
10. Replace Dirty Water Tank Assembly.  
TM  
11. Select SmartClean setting.  
react with the plastic  
materials used in your  
WATER ONLY - Use for gentle cleaning, or for (optional)  
rinsing following cleaning.  
POWERSTEAMER, causing  
TM  
cracking or pitting.  
NORMAL - Water and Floor Cleansing Formula are  
mixed to optimize normal cleaning. Use for everyday  
dirt and soil conditions.  
HIGH TRAFFIC - Water and Floor Cleansing Formula  
TM  
are mixed to optimize heavy cleaning. Use for  
entryways, hallways, heavy soil and stains. This  
setting may require more frequent refilling on the  
TM  
SmartMix bottle.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13. Unwrap Power Cord from Cord Retainer and  
plug into 120 Volt, 60 Hz grounded outlet as  
described in Important Safety Instructions,  
page 2.  
WARNING:  
The  
Dirty Water Tank  
Assembly holds  
approximately one  
gallon of soiled liquid.  
A special float device  
in the tank will cause  
the cleaner to stop  
Cleaning  
1. Slowly move the Bare Floor Cleaning Tool  
back and forth over soiled surface one time  
while depressing Trigger.  
Do not overwet.  
2. Repeat motion over same area without  
depressing Trigger.  
3. Repeat Steps 1 and 2 until no more dirt can  
be removed.  
removing solution from  
carpet, and the motor  
sound to rise in pitch  
when the Dirty Water  
Tank Assembly is full.  
Failure to empty full  
tank will damage unit.  
4. If machine loses suction and/or noise rises in  
pitch, turn Power Switch to OFF. Check the  
Dirty Water Tank Assembly and empty the  
tank if it is full (see WHEN YOURE DONE,  
page 7).  
WARNING:  
Do not  
lay unit on its back with  
Clean Water Tank Assembly  
in place. Do not tip up  
foot with Dirty Water  
5. If spray tip stops spraying, turn Power Switch  
to OFF and check water and cleaning solution  
levels. Refill if needed.  
Tank Assembly in place.  
Never run POWERSTEAMER dry.  
Putting it away  
1. Follow instructions in WHEN YOURE DONE, page 7.  
2. Disconnect Solution Tube Connector by turning it counter-  
clockwise and gently pulling it straight from port.  
3. Remove Flex Hose Assembly from Dirty Water Tank  
Triangle port.  
4. Replace Dirty Water Tank Triangle Lid.  
5. Coil Flex Hose Assembly in Hose Rack on back  
TM  
of POWERSTEAMER.  
6. Rinse Tools in clean running water, dry, and replace as  
shown in HOW TO PUT IT TOGETHER, page 4.  
7. Wrap Power Cord around Cord Holder on back of  
TM  
POWERSTEAMER.  
8. Wipe all surfaces with a soft cloth.  
9. Store cleaner upright in a protected, dry area.  
NOTE: You may have water remaining in the Clean Water  
TM  
Tank Assembly, and BISSELL Fiber Cleansing Formula  
®
remaining in the SmartMix dispenser. Never leave clean  
water in the Clean Water Tank Assembly or soiled  
solution in the Dirty Water Tank Assembly.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Reduced spray or no spray  
Possible Causes  
Remedies  
Clean Water Tank Assembly empty Refill Tank  
TM  
SmartMix dispenser empty  
Fill with BISSELL Fiber Cleansing  
TM  
Formula  
WARNING:  
To reduce the risk of  
fire, electric shock or  
injury unplug from  
outlet before servicing.  
Spray Nozzle clogged  
Clean Spray Nozzle  
Pump not operating properly  
Check electrical plug  
Power switch on?  
TM  
Turn POWERSTEAMER off and hold  
Trigger for 10-15 seconds. Turn Power  
Switch to“CLEANposition and hold  
trigger for10-15 seconds  
Call BISSELL Consumer Services  
Vacuum not picking up cleaning solution  
Possible Causes  
Loose Triangle Cap  
Remedies  
Check cap and snap securely into Dirty  
Water Tank Assembly  
Dirty Water Tank Assembly  
not aligned/secured  
Check Tank for proper alignment and  
secure with side latches  
Flex Hose Assembly not secure  
Check fit of Hose at Vacuum Port  
connections [Upholstery/Carpet Tool only]  
Poor Tool position  
[Upholstery/Carpet Tool only]  
Adjust angle; apply more downward  
pressure  
Dirty Water Tank Assembly is full  
Empty Dirty Water Tank Assembly  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Part numbers and descriptions  
Item Part No. Part Name  
1
010-9200 Flex Hose Assembly with  
4” Upholstery/Carpet Tool  
2
010-9201 4” Upholstery/Carpet Tool  
Assembly  
3
4
5
603-0966 4” Removable Brush  
603-0961 4” Window  
603-0910 6” Upholstery/Carpet Tool  
Assembly  
6
7
603-0911 6” Removable Brush  
603-0912 6” Window  
1
8
603-6110 Spray Tips (2)  
9
010-9148 Spraying Crevice Tool  
603-0905 Hose Clip  
010-9130 Bare Floor Cleaning Tool  
603-9040 Clean Water Tank  
Assembly  
10  
11  
12  
18  
10  
13  
14  
15  
16  
010-1645 Clean Water Tank  
Filler Cap  
603-1640 Clean Water Tank Cap  
and Insert Assembly  
014-9025 Dirty Water Tank  
Assembly  
013-2856 Dirty Water Tank  
Triangle Cap  
17  
18  
010-7055 Dirty Water Tank  
Drain Cap  
603-7075 Bolts and Nuts  
(2 each)  
15  
NOTE: To order replacement parts, or  
to order parts not originally included in  
your POWERSTEAMER model, call  
BISSELL Consumer Services  
1-800-237-7691  
9
Monday - Friday 8 a.m. — 7 p.m. EST  
5, 6, 7  
8
Saturday  
9 a.m. –– 1 p.m. EST  
2, 3, 4  
14  
11  
17  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About your warranty  
This warranty gives you specific legal rights, and you may  
also have other rights which may vary from state to state.  
If you need additional instruction regarding this warranty  
or have questions regarding what it may cover, call  
BISSELL Consumer Services.  
One Year Warranty  
BISSELL Inc., upon receipt of the product, will repair or  
replace, free of charge, any part which is defective or  
malfunctioning within one year of the purchase date,  
provided that it is used for personal and not commercial  
or rental service. If the deep cleaner cannot be repaired,  
BISSELL Inc. will replace or refund the full price.  
If your BISSELL product should require service  
1. Call BISSELL Consumer Services (1-800-237-7691)  
for referral to an authorized BISSELL Service  
Center.  
2. If there is not an authorized BISSELL Service  
Center in your area, a BISSELL Consumer  
Services Representative will issue you a Return  
Authorization Number.  
3. Return the machine with a photocopy of proof of  
purchase. (Your dated sales receipt is your  
warranty – do not send original. )  
Insure the machine when shipping for your protection from loss.  
BISSELL Consumer Services  
For information about repairs or replacement parts, or questions  
about your warranty, call:  
BISSELL Consumer Services  
1-800-237-7691  
Monday - Friday 8 a.m. — 7 p.m. EST  
Saturday  
9 a.m. — 1 p.m. EST  
Or write:  
BISSELL INC  
PO Box 3606  
Grand Rapids MI 49501  
ATTN: Consumer Services  
When contacting BISSELL, have model number of unit available.  
Please record your Model Number: ___________________  
Please record your Purchase Date: ___________________  
NOTE: Please keep your original sales receipt. It is your warranty.  
©1997 BISSELL Inc  
Grand Rapids, Michigan  
All rights reserved. Printed in China  
Part Number 010-5710  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Black Decker Iron ICR07X User Manual
Blomberg Range BGR241 User Manual
Blue Sea Systems Yard Vacuum PN 8363 User Manual
Bradford White Corp Water Heater Through the wall Gas water Heaters User Manual
Bradley Smoker Plumbing Product MG EXT User Manual
Brother Sewing Machine BAS 311E User Manual
Candy Washer CIN100T User Manual
Canon Digital Camera 0581C002 User Manual
CFM Fan 165834 User Manual
Chromalox Thermostat PK413 4 User Manual