BAP1700_08EM1.qxd:BAP170008EM1 V.qxd 4/14/08 9:09 AM Page 1
PERMAtech® ionizing
air cleaner
with air quality sensor
MODELS BAP1700
BAP1700C
Read instructions before operating.
Retain for future reference.
Instruction Leaflet
INFO-LINE
If after having read this leaflet, you have any
questions or comments on your air cleaner,
☎
call 1-800-253-2764 in North America.
9100040003375
BAP170008EM1
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
BAP1700_08EM1.qxd:BAP170008EM1 V.qxd 4/14/08 9:09 AM Page 5
adapter must be connected to a permanent ground such
as a properly grounded outlet box. The adapter should
not be used if a three-slot grounded receptacle is
available.
automatically adjusts the fan speed to cycle between
low, medium and high speed to provide optimum
filtration based on air particulate concentration. It also
helps conserve energy by only operating the fan at higher
speeds when needed.
This plug will only fit into a grounding type power outlet.
If the plug does not fit into the outlet, contact qualified
electrician to install the proper outlet.
IONIZER
This appliance has an optional ionizer feature which,
when turned on, releases negative ions into outgoing
filtered air to help the air purification process.
This product is for use on 120 volts. DO NOT ALTER
THE PLUG IN ANY WAY.
What Are Ions?
CORD SAFETY
Ions are tiny particles that carry a positive or negative
charge. They exist naturally around us: in the air, water,
and ground. Both positive and negative ions are
colorless, odorless, and completely harmless.
• The length of cord used on this appliance was
selected to reduce tangling or tripping hazards.
• If a longer cord is necessary, an approved extension
cord may be used. The electrical rating of the
extension cord must be equal to or greater than the
electrical rating of the air cleaner (see rating label
marked on product).
How Does The Ionizer Work?
Negative ions help air purification by attaching
themselves to very small airborne particles in the room.
These particles take on a negative charge and may join
with positively charged particles such as dust, pollen,
smoke, and pet dander to form larger particles. The larger
particles are then more easily captured by the filter system.
• Care must be taken to arrange the extension cord so
that it will not drape over the countertop or tabletop
where it can be pulled on by children or accidentally
tripped over.
Important Notes:
FEATURES
Your ionizer may produce an occasional popping or
cracking sound. This is normal and occurs when a small
buildup of ions is discharged.
GET TO KNOW YOUR AIR CLEANER
®
Your Bionarie air cleaner features a Permanent
After extended use, you may notice dust around the grills
or front panel.
HEPA-Type filter that removes up to 99% of airborne
dust and pollen as small as 2 microns and helps reduce
smoke, mold spores and pet dander from the air passing
through the filter.
• This is caused by negative ions exiting the air outlet,
evidence of the ionizer’s air cleaning effectiveness.
• Permanent filters can be vacuumed every few months
for easy cleaning.
• You can remove the dust with a soft brush or clean,
damp cloth.
• Washable pre-filter captures larger particles and
extends the permanent filter’s cleaning cycle.
Larger particles may be attracted to positively charged
surfaces throughout the home, like walls or floors.
• Optional ionizer naturally improves performance and
helps freshen the air.
• This may occur more frequently when the filter is
nearing the end of its useful product life and unable to
capture as many charged particles.
• Slim tower design allows placement in almost any
area of the room.
• Excessive amounts of pet dander, dust, or smoke
may decrease the life expectancy of the filter(s) and
interfere with the ionization process.
AIR QUALITY PARTICLE SENSOR
®
Your Bionaire air cleaner includes a particle sensor that
measures indoor air quality. When set to auto mode, it
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
BAP1700_08EM1.qxd:BAP170008EM1 V.qxd 4/14/08 9:09 AM Page 7
To help prevent particles from attracting to surfaces
throughout your home:
BEFORE USE
1. Carefully unpack your air cleaner.
• You may want to run the ionizer less often.
2. Select a firm, level surface with no obstructions to the
air inlets or outlets.
• Check the condition of the filter(s) more frequently.
CAUTION: The ionizer in this appliance produces less
ozone than the UL* established limits of 50ppb. However,
in high concentrations, ozone can be harmful to birds
and small pets. To prevent ozone buildup, we suggest
using the ionizer in well ventilated areas with the fan on.
3. If the filter is covered by a bag when shipped, remove
plastic bag before use and place filters into unit (See
INSTALLING THE FILTERS).
OPERATING INSTRUCTIONS
IMPORTANT:
®
IMPORTANT: Always clean the PERMAtech filter at the
recommended intervals (See CLEANING THE
®
PERMAtech FILTER). Using the ionizer with dirty filters
• Remove all plastic bags from filters before use.
may result in dirty particles exiting the air purifier and
attracting to walls, carpets, furniture, or other household
objects. These dirty particles may prove difficult to
remove.
• DO NOT POINT FILTERED AIR OUTLET TOWARDS
WALL.
To operate your air cleaner:
1. Press the POWER button.
®
HEPA-TYPE PERMAtech FILTER
•
The air cleaner will turn on at LOW filtering speed.
®
The PERMAtech filter allows easy maintenance and
2. Select filtering speed by pressing POWER button until
you reach the desired speed - HIGH, MEDIUM, LOW
or OFF.
eliminates the hassle of filter replacement. HEPA-type
(High Efficiency Particulate Air) filters are designed to
remove up to 99% of airborne pollutants, at 2 microns or
larger, from the air that passes through them. These include
tobacco smoke, household dust, pet dander and pollen.
•
The air cleaner will also turn off when you press
the POWER button for 3 seconds at any speed.
3. Press IONIZER button to turn ionizer ON or OFF.
FILTER INDICATOR
•
IONIZER button works in any mode except when
air cleaner is turned off.
The filter indicator light eliminates guesswork by letting
you know when it is time to clean the filters.
AIR QUALITY PARTICLE SENSOR
TIMER
The AUTO feature uses the particle sensor to cycle
between low, medium and high speeds, based on
surrounding indoor air quality. To use this feature:
The timer allows you to run the air cleaner at your
convenience, for up to 8 hours, and automatically turns
the power off when time is up, to help reduce energy
costs.
1. When air cleaner is off, press the AUTO button.
•
The button will illuminate and the air cleaner will
turn on to auto mode.
HIGH /MEDIUM, AND LOW SPEED SETTINGS
®
For optimum air filtration, operate your Bionaire Air
2. When air cleaner is on and set at any manual mode
speed, press the “auto” button.
Cleaner continuously on the HI setting. Its rugged motor
has been designed to give many years of use. For quieter
operation (such as in a bedroom), select LOW setting.
•
The button will illuminate and the air cleaner will
run in auto mode.
SETTING THE TIMER MODE
You may set the timer so it automatically turns off when
the desired time has elapsed:
*tested and listed by the Underwriters Laboratories, Inc.
7
6
Download from Www.Somanuals.com. All Manuals Search And Download.
BAP1700_08EM1.qxd:BAP170008EM1 V.qxd 4/14/08 9:09 AM Page 9
1. Press the TIMER button until you reach the desired
number of hours you want the unit to operate (2, 4, 6
or 8)
F
E
G
Figure 1
H
•
The number of hours selected will light up and
remain illuminated on the control panel.
A. Inlet Grill
B. Washable Foam
Pre-Filter (1)
I
•
When time is up, the air cleaner will beep 3
times and turn off.
®
C. PERMAtech
J
2. To CANCEL the timer, press the TIMER button one
more time. You may also cancel the timer operation
by turning the power button off.
Filter (2)
D. Filtered Air Outlet
E. Control Panel
F. Filter Check LED
G. Filter Reset Button
H. Timer Button
K
CLEANING AND
MAINTENANCE
L
M
®
CLEANING THE PERMAtech FILTER
I. Timer Leds (4)
J. Ionizer Button
K. Power Button
L. Power/Mode LED’s (3)
M. Auto Button
®
The PERMAtech filter is designed to never need
replacement. However, we recommend regular cleaning
for optimal performance.
• Every few weeks, check the condition of the filter.
• After approximately 3 months of operation, a Filter
Clean Indicator will alert you to clean the filter before
further use.
To clean the filter:
1. Turn off and unplug the air cleaner.
2. Remove the air inlet grill by pulling on the tab.
3. Remove and examine the foam pre-filter.
•
If it has collected dust or lint, remove and wash it
in warm soapy water. Rinse and drip dry
thoroughly before placing it back into the grill inlet.
®
4. Check the condition of the PERMAtech filters and
remove if dirty.
A
D
®
5. Clean the PERMAtech filter.
•
Using your vacuum cleaner,
run the brush attachment
along both sides of the filter
and clean between the
Figure 2
B
C
pleated layers (Figure 2).
IMPORTANT: Do not use water, household cleaners
®
or detergents to clean the PERMAtech filter.
9
8
Download from Www.Somanuals.com. All Manuals Search And Download.
BAP1700_08EM1.qxd:BAP170008EM1 V.qxd 4/14/08 9:09 AM Page 11
The filter may appear discolored, even after
vacuuming. This is normal and does not affect
performance in any way—a new filter is not
TIPS AND TROUBLESHOOTING
SOLUTION
ISSUE
necessary.
• Make sure unit is properly plugged in
and outlet is energized.
UNIT WILL NOT
OPERATE
If the filter becomes damaged during cleaning, call
1-800-253-2764 to order replacements.
• Make sure unit turned ON.
• Make sure nothing is blocking air inlet
and filtered air outlets.
• Remove all plastic bags from filters.
• Check condition of filters and clean if
necessary.
®
DECREASED AIR
FLOW
REINSTALLING THE PERMAtech FILTER AFTER
CLEANING
NOTE: A hang tab and filter clips
ensure the filter attaches properly.
1. Make sure the hang tab is
securely in place. Align the clip
• Make sure that the air intake grill is at
least 1 to 3 feet from away the wall.
• When unit operates in the AUTO
mode, it will automatically adjust the
fan speed to provide optimum filtration
based on air particulate concentration.
Therefore, depending on the air
quality in the room, some variation in
air flow is normal and expected.
• This is normal and does not affect
performance in any way. A new filter
is not necessary.
®
on the top of the PERMAtech
Figure 3
filter with the rails on the inside of
the unit. Gently slide the filter
onto the rail (see Figures 3 and 4).
2. Place air inlet grill back onto unit
securely.
3. After replacing the filters, RESET
the Clean Filter Indicator ( ) by
®
PERMAtech
FILTER APPEARS
DIRTY, EVEN AFTER
VACUUMING
CLEAN
Figure 4
inserting a small object (such as a
pin or paper clip) into the hole
below the filter change light (see
Figure 5). The light will turn off.
Figure 5
Reset
Button
• Remove plastic bag(s) from filter(s).
EXCESSIVE NOISE
• Make sure parts are firmly positioned
in place.
LEARNING MORE
For a wealth of information about your air cleaner and
®
other Bionaire products, visit our web site at
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
BAP1700_08EM1.qxd:BAP170008EM1 V.qxd 4/14/08 9:09 AM Page 13
5 YEAR LIMITED WARRANTY
Sunbeam Products, Inc. doing business as Jarden
Consumer Solutions or if in Canada, Sunbeam
consequential or similar damages or loss of profits, or for
any breach of contract, fundamental or otherwise, or for
any claim brought against purchaser by any other party.
Corporation (Canada) Limited doing business as Jarden
Consumer Solutions (collectively “JCS”) warrants that for
a period of five years from the date of purchase, this
product will be free from defects in material and
Some provinces, states or jurisdictions do not allow the
exclusion or limitation of incidental or consequential
damages or limitations on how long an implied warranty
lasts, so the above limitations or exclusion may not apply
to you. This warranty gives you specific legal rights, and
you may also have other rights that vary from province to
province, state to state or jurisdiction to jurisdiction.
workmanship. JCS, at its option, will repair or replace this
product or any component of the product found to be
defective during the warranty period. Replacement will be
made with a new or remanufactured product or
How to Obtain Warranty Service
In the U.S.A.
component. If the product is no longer available,
replacement may be made with a similar product of equal
or greater value. This is your exclusive warranty. Do NOT
attempt to repair or adjust any electrical or mechanical
functions on this product. Doing so will void this warranty.
If you have any question regarding this warranty or would
like to obtain warranty service, please call 1-800-253-2764
and a convenient service center address will be provided
to you.
This warranty is valid for the original retail purchaser from
the date of initial retail purchase and is not transferable.
Keep the original sales receipt. Proof of purchase is
required to obtain warranty performance. JCS dealers,
service centers, or retail stores selling JCS products do
not have the right to alter, modify or any way change the
terms and conditions of this warranty.
In Canada
If you have any question regarding this warranty or would
like to obtain warranty service, please call 1-800-253-2764
and a convenient service center address will be provided
to you.
In the U.S.A., this warranty is offered by Sunbeam
Products, Inc. doing business as Jarden Consumer
Solutions located in Boca Raton, Florida 33431. In
Canada, this warranty is offered by Sunbeam Corporation
(Canada) Limited doing business as Jarden Consumer
Solutions, located at 20 B Hereford Street, Brampton,
Ontario L6Y 0M1. If you have any other problem or claim
in connection with this product, please write our
Consumer Service Department.
This warranty does not cover normal wear of parts or
damage resulting from any of the following: negligent use
or misuse of the product, use on improper voltage or
current, use contrary to the operating instructions,
disassembly, repair or alteration by anyone other than
JCS or an authorized JCS service center. Further, the
warranty does not cover: Acts of God, such as fire, flood,
hurricanes and tornadoes.
What are the limits on JCS’s Liability?
PLEASE DO NOT RETURN THIS PRODUCT TO ANY
OF THESE ADDRESSES OR TO THE PLACE OF
PURCHASE.
JCS shall not be liable for any incidental or consequential
damages caused by the breach of any express, implied
or statutory warranty or condition.
Except to the extent prohibited by applicable law, any
implied warranty or condition of merchantability or fitness
for a particular purpose is limited in duration to the
duration of the above warranty.
© 2008 Sunbeam Products, Inc. doing business as
Jarden Consumer Solutions. All Rights Reserved.
Distributed by Sunbeam Products, Inc. doing business as
Jarden Consumer Solutions.
JCS disclaims all other warranties, conditions or
representations, express, implied, statutory or otherwise.
JCS shall not be liable for any damages of any kind
resulting from the purchase, use or misuse of, or inability
to use the product including incidental, special,
BAP170008EM1
Printed in China
13
12
Download from Www.Somanuals.com. All Manuals Search And Download.
|